KOSY MCS System Low Cost by sanmelody

VIEWS: 76 PAGES: 1

									KOSY2-MCS A5-System Low Cost
Revised: 20.08.2004
The simple construction and the efficient production allows
us to offer you a machine, remarkable in price and performance.
Bestellinformation
Art.-no. Art.-designation (the CNC-machine is part of this article)

EKS10      KOSY2 – Standard A5-system (Initial equipment)


Technical data of the CNC-machine
Coordinate Table
- Body and base frame made of Alu profiles                        tightly screwed
- Dimensions of the machine (b x d x h)                           about 370 x 510 x 440 (mm)
- Linear drives with 2 hardened guide rails                       supported by special profile, 4 rollers on each side with ball bearings
- Linear drives with rolled ball screws                           12 x 4 (mm), bothside ball bearing. Precision of spindle < 0,01 mm
- Movements X - Y - Z                                             about 180 x 320 x 108 (mm)
- each axis with 1 two-phase stepping motor                       2 Ampere; holding torque about 40 Ncm
- Switch for HOME-position                                        Software-supported
- Resolution (1 step of the stepping motor)                       1.25µm
- Accuracy of repetition (100 repetitions)                        < 0,05 mm
- Working area (Y-table) / max. workpiece dimension (b x h)       about 185 x 300 (mm) / about 220 x 50 (mm)
- Surface accuracy, Y-table                                       < + - 0,2 mm, surface can be milled plane by user
- max. depth per step, chipboard / PVC / Alu (AlMgSi05)           5 mm / 2 mm / 0,5 mm
- max. tool diameter                                              mill 3 mm, drill 6 mm
- max. feed X-, Y-direction in fast mode/working mode             80 mm/sec / 40 mm/sec
- max. feed Z-direcition in working mode                          20 mm/sec
- max. load Z-table                                               2,5 kg
- Machining power X/Y/Z with 10mm/s feed                          > 200 N
- Machining power X/Y/Z in fast mode                              > 100 N
Control
- Electronics with power supply                                   integrated in top
- Own intelligence with line/circle interpolation                 Microcontroller
- Voltage supply                                                  230 Volt V +- 10% / about 100 Watt
- Control connection                                              serial port, 9 pol. D-sub-cord included
- Blocking the machining (Emergency stop = NOT-Halt)              By whole keyboard and switch "Sperren" („Lock“)
- max. phase current of final stage                               2 Ampere, limitation, Pulse with modulation
- Current reduction at standstill                                 to approx. 30% of rated current
- Frequency generating and current regulation                     by integrated microcontroller,independent from PC-clock frequency
- 1 Kaltgeräte-socket, On/Off programmable                        230 Volt / 750 Watt for machining unit BAE10 with Metabo-spindle
- 1 socket for depth-measuring/control                            depth control or 3D-sensor optional, programmation supported by nccad
- 1 socket for tool-length-measuring                              tool-length-measurer optional, programmation supported by nccad
                                                                  machine related licence
- Software nccad since version 7.5 standard                       no 3D function, no LokAhead
                                                                  upgrade to professional version possible
General Data
- Environment conditions                                          5 to 40°C (Cat 3K3), max. 60% rel. humidity
                                                                  For adult persons only (from 18 years). CE according to EU-Mmachine
- Authorized users and security
                                                                regulations
- Maintenance intervals, first/subsequent maintenance             after about 50 operating hours / as required
- weight                                                          about 20 kg

								
To top