Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

Dur-A-Flex Estimating Tool Version 14 - Dur-A-Flex University

VIEWS: 29 PAGES: 393

									Shop Floor w/Flintshot-Q28
ENTER Square feet of Floor=               0                                                    Total Quantity            # Resin                 #Hardener
Step 1-Figure Primer                     Which Primer will you be using?
                                                        Dur-A-Shield II (1:2 mix)                          0.0    Gals         0   Gals               0   Gals
                                                        Dur-A-Poxy High Gloss (1:1 mix)                    0.0    Gals         0   Gals               0   Gals
                                                        Tie-Coat (1:2 mix)                                 0.0    Gals         0   Gals               0   Gals
Step 2-Optional Elast-O-Coat Membrane                                   10 mils                            0.0    Gals         0   Gals               0   Gals
                                                                        20 mils                            0.0    Gals         0   Gals               0   Gals
                                                                        32 mils                            0.0    Gals         0   Gals               0   Gals
Step 3-Shop Floor Broadcasts              Which Base system will you be using?
Single Broadcast                          1/16"                         # Flintshot (Q28)                  0.0    lbs          0   100 lb Bags
                                                        SF Liquids      Standard Texture1                  0.0    Gals         0   Gals               0 Gals
                                                        SF Liquids      Orange Peel2                       0.0    Gals         0   Gals               0 Gals
Double Broadcast                          1/8"                          # Flintshot (Q28)                  0.0    lbs          0   100 lb Bags
                                                        SF Liquids      Standard Texture                   0.0    Gals         0   Gals               0 Gals
                                                        SF Liquids      Orange Peel                        0.0    Gals         0   Gals               0 Gals
Slurry Broadcast                          1/8"                          # Flintshot (Q28)                  0.0    lbs          0   100 lb Bags
                                                                        # 1/2 sand                         0.0    lbs          0   100 lb Bags
                                                                        # 290 Flour                        0.0    lbs          0   50 lb Bags
                                                        SF Liquids      Standard Texture                   0.0    Gals         0   Gals               0 Gals
                                                        SF Liquids      Orange Peel                        0.0    Gals         0   Gals               0 Gals
Triple Broadcast                          3/16"                         # Flintshot (Q28)                  0.0    lbs          0   100 lb Bags
                                                        SF Liquids      Standard Texture                   0.0    Gals         0   Gals               0 Gals
                                                        SF Liquids      Orange Peel                        0.0    Gals         0   Gals               0 Gals
Step 4-Urethane Topcoat?                  Which Topcoat will you be using?
                                                        Armor Top                                          0.0 Gals            0 Gals                 0 Gals
                                                        Poly-Thane #2 Hi-Solids                            0.0 Gals            0 Gals                 0 Gals
                                                        Glaze #5                                           0.0 Gals            0 Gals                 0 Gals
Standard Texture1 one Shop Floor grout coat will yield a Regular Texture
Orange Peel Texture2 Two Shop Floor grout coats will yield an Orange Peel Texture
Note: Add 3-5% to all material estimates to ensure you don't run out!!

Shop Floor w/Q11
ENTER Square feet of Floor=                 0                                                    Total Quantity          # Resin                 #Hardener
Step 1-Figure Primer                        Which Primer will you be using?
                                                          Dur-A-Shield II                                   0.0   Gals         0   Gals               0   Gals
                                                          Dur-A-Poxy High Gloss                             0.0   Gals         0   Gals               0   Gals
                                                          Tie-Coat                                          0.0   Gals         0   Gals               0   Gals
Step 2-Optional Elast-O-Coat Membrane                     10 mils                                           0.0   Gals         0   Gals               0   Gals
                                                          20 mils                                           0.0   Gals         0   Gals               0   Gals
                                                          32 mils                                           0.0   Gals         0   Gals               0   Gals
Step 3-Shop Floor Broadcasts                Which Base system will you be using?
Single Broadcast                            3/32"                         # Q11                             0.0   lbs          0   100 lb Bags
                                                          SF Liquids      with 1 topcoat1                   0.0   Gals         0   Gals               0 Gals
                                                          SF Liquids      with 2 topcoats                   0.0   Gals         0   Gals               0 Gals
Double Broadcast                            3/16"                         # Q11                             0.0   lbs          0   100 lb Bags
                                                          SF Liquids      with 1 topcoat                    0.0   Gals         0   Gals               0 Gals
                                                          SF Liquids      with 2 topcoats                   0.0   Gals         0   Gals               0 Gals
Slurry Broadcast                            3/16"                         # Q11                             0.0   lbs          0   100 lb Bags
                                                                          # 1/2 sand                        0.0   lbs          0   100 lb Bags
                                                                          # 290 Flour                       0.0   lbs          0   50 lb Bags
                                                          SF Liquids      with 1 topcoat                    0.0   Gals         0   Gals               0 Gals
                                                          SF Liquids      with 2 topcoats                   0.0   Gals         0   Gals               0 Gals
Triple Broadcast                            1/4"                          # Q11                             0.0   lbs          0   100 lb Bags
                                                          SF Liquids      with 1 topcoat                    0.0   Gals         0   Gals               0 Gals
                                                          SF Liquids      with 2 topcoats                   0.0   Gals         0   Gals               0 Gals
Step 4-Urethane Topcoat?                    Which Topcoat will you be using?
                                                          Armor Top                                         0.0   Gals         0 Gals                 0 Gals
                                                          Poly-Thane #2 Hi-Solids                           0.0   Gals         0 Gals                 0 Gals
                                                          Glaze #5                                          0.0   Gals         0 Gals                 0 Gals
1
  "with 1 topcoat" or "with 2 topcoats" refers to the number of epoxy topcoats before the optional urethane

Note: Add 3-5% to all material estimates to ensure you don't run out!!
Dur-A-Quartz w/Q28
ENTER Square feet of Floor=             850          then hit enter                                      Total Quantity     # Resin                #Hardener
Step 1-Figure Primer                Which Primer will you be using?
                                                Dur-A-Shield II                                                4.3   Gals      3   Gals               1   Gals
                                                Dur-A-Poxy High Gloss                                          4.3   Gals      2   Gals               2   Gals
                                                Tie-Coat                                                       2.4   Gals      2   Gals               1   Gals
Step 2-Optional Elast-O-Coat Membrane           10 mils                                                        5.3   Gals      4   Gals               2   Gals
                                                20 mils                                                       10.6   Gals      7   Gals               4   Gals
                                                32 mils                                                       17.0   Gals     11   Gals               6   Gals
Step 3-Dur-A-Quartz Broadcasts      Which Base system will you be using?
Single Broadcast                    1/16"                                           # Q28                    425.0   lbs       9   50 lb    Bags
                                                                                                     1
                                                Glaze #4 or Ultra Clear             Standard Texture          17.3   Gals     12   Gals               6 Gals
                                                                                                2
                                                Glaze #4 or Ultra Clear             Orange Peel               20.7   Gals     14   Gals               7 Gals
Double Broadcast                    1/8"                                            # Q28                    722.5   lbs      14   50 lb    Bags
                                                Glaze #4 or Ultra Clear             Standard Texture          25.8   Gals     17   Gals               9 Gals
                                                Glaze #4 or Ultra Clear             Orange Peel               29.3   Gals     20   Gals              10 Gals
Slurry Broadcast                    1/8"                                            # Q28                    595.0   lbs      12   50 lb    Bags
                                                                                    # 1/2 sand                85.0   lbs       1   100 lb   Bags
                                                                                    # 290 Flour               85.0   lbs       2   50 lb    Bags
                                                     Glaze #4 or Ultra Clear        Standard Texture          25.8   Gals     17   Gals               9 Gals
                                                     Glaze #4 or Ultra Clear        Orange Peel               29.3   Gals     20   Gals              10 Gals
Triple Broadcast                        3/16"                                       # Q28                   1062.5   lbs      21   50 lb    Bags
                                                       Glaze #4                     Standard Texture          34.0   Gals     23   Gals              11 Gals
                                                       Glaze #4                     Orange Peel               38.6   Gals     26   Gals              13 Gals
Step 4-Urethane Topcoat?                  Which Topcoat will you be using?
                                                       Poly-Thane #2 Hi-Solids                                 3.1 Gals        2 Gals                 1 Gals
                                                       Armor Top                                               1.9 Gals        0 Gals                 2 Gals
                                                       Glaze #5                                                4.3 Gals        3 Gals                 1 Gals
                1
Standard Texture one Glaze #4 or Kitchen grout coat will yield a Regular Texture
Orange Peel Texture2 Two Glaze #4 or Kitchen grout coats will yield an Orange Peel Texture
Note: Add 3-5% to all material estimates to ensure you don't run out!!
Dur-A-Gard SL System
ENTER Square feet of Floor=               0                 then hit ENTER                   Total Quantity         # Resin                   #Hardener
Step 1-Figure Primer                Which Primer will you be using?
                                                      Dur-A-Shield II                                  0.0   Gals         0   Gals                0   Gals
                                                      Dur-A-Poxy High Gloss                            0.0   Gals         0   Gals                0   Gals
                                                      Dur-A-Glaze #4 Damp Primer                       0.0   Gals         0   Gals                0   Gals
                                                      Tie-Coat                                         0.0   Gals         0   Gals                0   Gals
Step 2-Optional Elast-O-Coat Membrane                            10 mils                               0.0   Gals         0   Gals                0   Gals
                                                                 20 mils                               0.0   Gals         0   Gals                0   Gals
                                                                 32 mils                               0.0   Gals         0   Gals                0   Gals
Step 3-SL BASE APPLICATION          Which Base system will you be using?
                                    35 mil                       # 290 Flour                           0.0   lbs          0   50 lb    Bags
                                                                 # F-70 Sand                           0.0   lbs          0   100 lb   Bags
                                                                 SF Liquids                            0.0   Gals         0   Gals                0 Gals
                                    60 mil                       # 290 Flour                           0.0   lbs          0   50 lb    Bags
                                                                 # F-70 Sand                           0.0   lbs          0   100 lb   Bags
                                                                 SF Liquids                            0.0   Gals         0   Gals                0 Gals
                                    100 mil                      # 290 Flour                           0.0   lbs          0   50 lb    Bags
                                                                 # F-70 Sand                           0.0   lbs          0   100 lb   Bags
                                                                 SF Liquids                            0.0   Gals         0   Gals                0 Gals
Step 4-Dur-A-Gard OPF?              Will you topcoat with Gard Orange-Peel?
                                                      Dur-A-Gard OPF                                   0.0 Gals           0 Gals                  0 Gals

Step 5-Urethane Final Topcoat?          Which Urethane Topcoat will you be using?
                                                         Armor Top                                      0.0 Gals          0 Gals                  0 Gals
                                                         Poly-Thane #2 Hi-Solids                        0.0 Gals          0 Gals                  0 Gals
                                                         Glaze #5                                       0.0 Gals          0 Gals                  0 Gals
In case of very pourous concrete, may need to double prime if outgassing results after the first priming
The GARD SL system results in a smooth floor
Dur-A-Chip System
ENTER Square feet of Floor=                 0              then hit ENTER                              Total Quantity       # Resin          #Hardener
Step 1-Figure Primer                      Which Primer will you be using?
                                                         Dur-A-Shield II                                       0.0   Gals     0.0   Gals        0.0   Gals
                                                         Dur-A-Poxy High Gloss                                 0.0   Gals     0.0   Gals        0.0   Gals
                                                         Dur-A-Glaze #4 Damp Primer                            0.0   Gals     0.0   Gals        0.0   Gals
                                                         Tie-Coat                                              0.0   Gals     0.0   Gals        0.0   Gals
Step 2-Optional Elast-O-Coat Membrane                                             10 mils                      0.0   Gals     0.0   Gals        0.0   Gals
                                                                                  20 mils                      0.0   Gals     0.0   Gals        0.0   Gals
                                                                                  32 mils                      0.0   Gals     0.0   Gals        0.0   Gals
Step 3-BASE APPLICATION                   Which Base system will you be using?
First Broadcast                                                                   Dur-A-Poxy 245               0.0   Gals     0.0   Gals        0.0 Gals
                                                                                  Macro Chips                  0.0   lbs      0.0   x55 lb   Boxes
                                                                                  Micro Chips                  0.0   lbs      0.0   x55 lb   Boxes
                                                         OR                       Dur-A-Gard OPF               0.0   Gals     0.0   Gals        0.0 Gals
                                                                                  Macro Chips                  0.0   lbs      0.0   x55 lb   Boxes
                                                                                  Micro Chips                  0.0   lbs      0.0   x55 lb   Boxes
Second Broadcast                                         Glaze #4 or Ultra Clear                               0.0   Gals     0.0   Gals        0.0 Gals
                                                                                  Macro Chips                  0.0   lbs      0.0   x55 lb   Boxes
                                                                                  Micro Chips                  0.0   lbs      0.0   x55 lb   Boxes
Step 5-Clear Epoxy Topcoat?
                                                         Glaze #4 or Ultra Clear                               0.0 Gals       0.0 Gals          0.0 Gals
Step 6-Urethane Final Topcoat?            Which Urethane Topcoat will you be using?
                                                         Poly-Thane #2 Hi-Solids                               0.0 Gals       0.0 Gals          0.0 Gals
                                                         Armor Top                                             0.0 Gals         0 Gals            0 Gals
                                                         Glaze #5                                              0.0 Gals       0.0 Gals          0.0 Gals
In case of very pourous concrete, may need to double prime if outgassing results after the first priming

Note: Add 3-5% to all material estimates to ensure you don't run out!!
Dur-A-Crete
ENTER Square feet of Floor=             0                then hit ENTER                  Total Quantity       # Resin                #Hardener
Step 1-Dur-A-Crete BASE APPLICATION
Thickness                         1/4"                       Dur-A-Glaze #41                            0.0 Gals    0 Gals                 0   Gals
                                                             Dur-A-Crete Aggregate                      0.0 lbs     0 40 lb Bags
                                          1/8"               Dur-A-Glaze #4                             0.0 Gals    0 Gals                 0   Gals
                                                             Dur-A-Crete Aggregate                      0.0 lbs     0 40 lb Bags
                                          3/16"              Dur-A-Glaze #4                             0.0 lbs     0 Gals                 0   Gals
                                                             Dur-A-Crete Aggregate                      0.0 lbs     0 40 lb Bags
Step 4-Crete-Gard or Dur-A-Glaze #4 Cove-Rez (Pigmented)?
                                                             Cove-Rez                                   0.0 Gals    0 Gals                 0   Gals
                                                                         2
                                                             Crete-Gard                                 0.0 Gals    0 Gals                 0   Gals
Step 5-Final Topcoat?                     Which Final Topcoat will you be using?
                                                             Dur-A-Gard OPF                             0.0 Gals    0 Gals                 0   Gals
                                                             Armor Top                                  0.0 Gals    0 Gals               0.0   Gals
                                                             Poly-Thane #2 Hi-Solids                    0.0 Gals    0 Gals                 0   Gals
                                                             Glaze #5                                   0.0 Gals    0 Gals                 0   Gals
1
  The amount of Glaze #4 estimated includes a wet primer at 200 square feet per gallon and no topcoat.
2
  The amount of Crete-Gard or Cove-Rez you will need depends on whether you are hand troweling or power troweling, and how tight the Crete
       matrix is closed. Used 150 square feet to the gallon to estimate.
In case of very pourous concrete, may need to double prime if outgassing results after the first priming
Note: Add 3-5% to all material estimates to ensure you don't run out!!
Epoxy Coatings
ENTER Square feet of Floor=                 0                 then hit ENTER                       Total Quantity
Step 1-Figure Primer                        Which Primer will you be using?
                                                              Dur-A-Shield II                                  0.0
                                                              Dur-A-Poxy High Gloss                            0.0
                                                              Dur-A-Glaze #4 Damp Primer                       0.0
                                                              Tie-Coat                                         0.0
                                                                           1
                                            Are you pigmenting the primer?
                                                              Add-A-Color #4 in Tie-Coat                      0.00
                                                              Add-A-Color #4 in Dur-A-Shield II               0.00
Step 2-Optional Elast-O-Coat Membrane                                    10 mils                               0.0
                                                                         20 mils                               0.0
                                                                         32 mils                               0.0
Step 3-Dur-A-Gard Application
                                                              Dur-A-Gard OPF                                   0.0
                                                              Dur-A-Gard                                       0.0
Step 5-Urethane Final Topcoat?              Which Urethane Topcoat will you be using?
                                                              Armor Top                                        0.0
                                                              Poly-Thane #2 Hi-Solids                          0.0
                                                              Glaze #5                                         0.0
1
  Are you pigmenting the Primer? Particularly when doing coating that are light in color, it is beneficial to pigment Tie-Coat or Du
using Add-A-Color #4 for better hiding power. To give a dense, rich, color when intalling White, Ivory, or any other light color, pi
 the topcoat. Most of the hiding will be done by the Dur-A-Gard.
In case of very pourous concrete, may need to double prime if outgassing results after the first priming
Note: Add 3-5% to all material estimates to ensure you don't run out!!
Total Quantity      # Resin                 #Hardener

             Gals        0.0   Gals             0.0   Gals
             Gals        0.0   Gals             0.0   Gals
             Gals        0.0   Gals             0.0   Gals
             Gals        0.0   Gals             0.0   Gals

             Gals
             Gals
             Gals        0.0 Gals               0.0 Gals
             Gals        0.0 Gals               0.0 Gals
             Gals        0.0 Gals               0.0 Gals

             Gals        0.0 Gals               0.0 Gals
             Gals        0.0 Gals               0.0 Gals

               Gals        0.0 Gals              0.0 Gals
               Gals        0.0 Gals              0.0 Gals
               Gals        0.0 Gals              0.0 Gals
 ficial to pigment Tie-Coat or Dur-A-Shield II .
Ivory, or any other light color, pigment the primer and
Enter # of linear Feet of Cove                   0
Epoxy Cove
Height of COVE                                                4 inch                                       6 inch
Cove Strip?                                      Cove Strip            No Cove Strip          Cove Strip            No Cove Strip
# of Typical Mixes                                        0                        0                   0                        0
#4A                                                       0   Gals                 0   Gals            0   Gals                 0   Gals
Cove Rez                                                  0   Gals                 0   Gals            0   Gals                 0   Gals
# Flintshot or DAQ                                        0   lbs                  0   lbs             0   lbs                  0   lbs
# Bags of Flintshot (100 lb Bags)                         0   Bags                 0   Bags            0   Bags                 0   Bags
# Bags of Dur-A-Quartz                                    0   Bags                 0   Bags            0   Bags                 0   Bags
Typical Mix for Cove
Dur-A-Glaze #4 Hardener                          1 pint
Dur-A-Glaze #4 Cove-Rez                          1 quart
Flintshot or Dur-A-Quartz                        25 lbs


MMA 4 " Cove                                       Primer P-101                  0.0   Gals
use COVE STRIP!!!                                  Cryl-A-Cove                   0.0   Gals
                                                   Q28                           0.0   Bags
                                                   2 Topcoats T-301              0.0   Gals
                                                   Cryl-A-Cure                   0.0   oz
Note: For Cryl-A-Cure calculation, 128 oz = 1 gallon
Dur-A-Gard ESD
ENTER Square feet of Floor=                0                 then hit ENTER                     Total Quantity
Step 1-Figure Primer
                                                             Dur-A-Glaze #4 ESD Primer                     0.0
Step 3-Dur-A-Gard Application
                                                            Dur-A-Gard ESD                                 0.0
In case of very pourous concrete, may need to double prime if outgassing results after the first priming
Note: Add 3-5% to all material estimates to ensure you don't run out!!
Total Quantity      # Resin        #Hardener

             Gals       0.0 Gals         0.0 Gals

             Gals       0.0 Gals         0.0 Gals
Poly-Crete
ENTER Square feet of Floor=   0          then hit ENTER   Total Quantity
Poly-Crete HF Application
                              1/4" Troweled               0
                              3/8" Troweled               0
Poly-Crete MD Application     3/16" Self Level            0
Polycrete SL Application                                  0
uantity

   Kits
   Kits
   Kits
   kits
Dur-A-Flex MMA Systems
ENTER Square feet of Floor=          1200
Primer for all systems               Cryl-A-Prime P-101
Cryl-A-Floor & Cryl-A-Quartz         Using Flintshot or Q28=1/8"
Double Broadcasts                    See Primer above
                                     2 Applications of G-201
                                     2 Broadcasts Flintshot or Q28
                                     2 Topcoats T-301
                                     Cryl-A-Color (Add to T-301 for Cryl-A-Floor only)
                                     Using Qrok or Q11=3/16"
                                     See Primer above
                                     2 Applications of G-201
                                     2 Broadcasts Qrok or Q11
                                     2 Topcoats T-301
                                     Cryl-A-Color (Add to T-301 for Cryl-A-Floor only)
Cryl-A-Floor SL & Cryl-A-Quartz SL   Using Flintshot or Q28=3/16"
using SL filler                      See Primer above
                                     G-201
                                     SL Filler
                                     Cryl-A-Color for G-201
                                     Flintshot or Q28 for broadcast
                                     2 Topcoats T-301
                                     Cryl-A-Color for T-301 (Cryl-A-Floor SL only)
                                     Using Qrok or Q11=3/16"
                                     See Primer above
                                     G-201
                                     SL Filler
                                     Cryl-A-Color for G-201
                                     Qrok or Q11 for broadcast
                                     2 Topcoats T-301
                                     Cryl-A-Color for T-301 (Cryl-A-Floor SL only)
Cryl-A-Chip                          Double Broadcast
                                     See Primer above
                                     G-201
                                     Macro Chip
                                     Micro Chip
                                     2 Topcoats T-301
                                     Cryl-A-Chip SL
                                     See Primer above
                                     G-201
                                     SL Filler
                                     Cryl-A-Color
                                     Macro Chip
                                     Micro Chip
                                     2 Topcoats T-301
Cryl-A-Gard SL                       See Primer above
                                     G-201
                                     SL Filler
                                     Cryl-A-Color
                                     1 Topcoat T-301
MMA Cove-See the COVE sheet
add BPO1-Figured at Substrate and Material Temperature at60F
Note: Add 3-5% to all material estimates to ensure you don't run out!!
Total Quantity          add CRYL-A-CURE (BPO)-60F
            12 Gals                  60 oz


            27   Gals               176 oz
          1200   lbs
            27   Gals                81 oz
             3   Gals


            29   Gals               189 oz
          1200   lbs
            29   Gals                87 oz
             3   Gals


            55   Gals               359 oz
            32   Bags
             2   Gals
           900   lbs
            27   Gals                81 oz
             3   Gals


            55   Gals               359 oz
            32   Bags
             2   Gals
           900   lbs
            29   Gals                87 oz
             3   Gals


            24   Gals               156 oz
           180   lbs
           216   lbs
            24   Gals                72 oz


            55   Gals               359 oz
            32   Bags
             2   Gals
           180   lbs
           216   lbs
            24   Gals                72 oz

            55   Gals               359 oz
            32   Gals
             2   Gals
            12   Gals                36 oz
ENTER Square feet of Floor                        95000
                                                                  HYBRI-FLEX A
                                                              AQ
                                                   units    Q11   Q28
Step 1-Polycrete SL Application-kits             kits      1727 1727
Quartz                                           lbs       76000 76000
Chips                                            lbs
F-70                                             lbs
Step 2-Second Broadcast
Shop Floor Resin                                 gals
Dur-A-Glaze #4 Resin                             gals      1273    707
Dur-A-Glaze #4 Fast Hardener                     gals       627    348
Dur-A-Glaze #4 Regular Hardener                  gals
Cryl-A-Glaze G-201                               gals
Cryl-A-Cure
Quartz                                           lbs       47500 47500
Chips                                            lbs
290 Flour                                        lbs
F-70                                             lbs
Step 3-Grout Coat Application
Shop Floor                                       gals
Dur-A-Glaze #4 Resin                             gals
Dur-A-Glaze #4 Regular or Water Clear Hardener   gals
Cryl-A-Top T-301                                 gals
Cryl-A-Color                                     ounces
Cryl-A-Cure
Step 4-Top Coat (s) Application
                                                 3 quart
Dur-A-Glaze #5-1 topcoat                         kits      2533    1407
                                                 3 quart
Dur-A-Glaze #5 -2nd topcoat                      kits      844     633
Poly-Thane #2 High Solids Hardener               gals
Poly-Thane #2 High Solids Resin                  gals
Add-A-Color #4                                   ounces
Armor-Top Pigmented                              kits
Cryl-A-Top T-301                                 gals
Cryl-A-Color   ounces
Cryl-A-Cure
HYBRI-FLEX A                      HYBRI-FLEX E
         AC           EB         EQ            EC       ES
       Macro Micro Q-Rok Flint Q11   Q28 Macro Micro smooth
       1727 1727    1727 1727 1727 1727 1727 1727       1727
                   76000 76000 76000 76000
       9500 14250                           9500 14250
                                                       47500

                     1273   707                              1407
       637   637                   1273   707   424    637
       314   314      627   348     627   348   209    314
                                                              704


                     47500 47500 47500 47500
      9500   14250                              9500 14250
                                                             19000
                                                             19000

                     1273   707
                                   1273   707   424    637
                      627   348     627   348   209    314




      1267   1267

       633   633
                      105    105   105    105   105    105
                      212    212   212    212   212    212
                     2533   2533
                      136    136                              136
                         HYBRI-FLEX M
   MB                               MQ         MC
Q-Rok              Flint          Q11   Q28 Macro Micro
 1727                        1727 1727 1727 1727 1727
76000                       76000 76000 76000
                                              9500 14250
                                                                 0




 1900                       1056 1900 1056         1188   1188
      Consult Cryl-A-Cure Chart
47500                      47500 47500 47500
                                                   9500 14250




 1900                         1056   1900   1056   1188   1188
15200                         8444
        Consult Cryl-A-Cure Chart




  950                         950    950    950    950    950
7600                         7600
       Consult Cryl-A-Cure Chart

								
To top