VIEWS: 194 PAGES: 12 POSTED ON: 3/12/2011
AUCTION LARGE CAPACITY HEAVY MACHINING & REPAIR FACILITY CLOSING Well-Maintained, Large-Capacity Manual Engine Lathes, Vertical & Horizontal Boring Mills, Milling Machines, Radial Arm Drills, Support Machinery, Welding & Fabricating Machines, Material Handling Equipment, & Much, Much More! Plus Industrial Real Estate for Sale Subject to Confirmation W.F. WELLS MDL. B-25-2 SEMI-AUTOMATIC HORIZONTAL BANDSAW 70" X 480" SUMMIT HEAVY DUTY ENGINE LATHE At the Premises of LAWCO INDUSTRIAL MACHINE WORKS, INC. 3047 South Burnside Avenue (Highway 44) GONZALES, LOUISIANA 70737 (See Directions on Back Page) TUESDAY, SEPTEMBER 11 • 10:00 A.M. INSPECTION: Monday, September 10, 9:00 A.M. to 4:00 P.M. & Morning of Sale A 10% BUYER’S PREMIUM WILL APPLY INDUSTRIAL PROPERTY FOR SALE 124" SCHEISS DOUBLE COLUMN VERTICAL BORING MILL Sale Conducted By: Headquarters: PLANT & MACHINERY INC. 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 AUCTIONEERS • APPRAISERS • LIQUIDATORS • REAL ESTATE PHONE: (713) 691-4401 FAX: (713) 672-7905 Bob Braman LA LIC. #1099-07 • Ron Moore LA LIC. #851-07 E-MAIL: firstname.lastname@example.org HOUSTON • DALLAS • ST. LOUIS WEBSITE: www.pmi-auction.com ENGINE LATHES SUMMIT 70" X 480", Mdl. 70, 72- 21/32" sw. over bed, approx. 52" sw. over crosslide, 53-15/16" sw. over carriage, 39-3/8"W. bed, 480" dist. btn. center, hard ways, A1-15 spndl. nose, 8-1/8" spndl. hole, spndl. spds.: 3–300 RPM, 50 HP spndl. drive motor, full length inch/metric thdng., pwr. compound w/worm gear swivel, pwr. tailstock body, thread chas- ing dial, 40" cap. roller jaw steadyrest, 8-11/16" tailstock spndl. sleeve, rapid traverse, S/N 0701. SUMMIT 50" X 144" GAP BED TYPE, 50-1/2" sw. over bed, 70" X 480" SUMMIT HEAVY DUTY ENGINE LATHE approx. 39" sw. over crosslide, 144" dist. btn. centers, hard ways, approx. 64" sw. in gap, 20" dist. gap to chuck, 39-1/4" dia. 4-jaw through hole chuck, 6-1/8" spndl. through hole, spndl. spds.: 6–400 RPM, full length leadscrew with inch/metric thdng., taper attach., steadyrest, pwr. rapid traverse, 6-1/4" tailstock spndl. quill, pwr. compound, removable gap, S/N N.A. DAINICHI 40" X 236", new 1976, Mdl. DM102-600, 40" sw. over bed, 34.6" sw. over crosslide, 236" dist. btn. centers, spds.: 8.5–630 RPM, 30 HP spndl. drive motor, inch/metric thdng., pwr. rapid traverse, remote operator’s control station, roller jaw steadyrest and followrest, S/N 14453. LEHMANN 35" X 360", Mdl. 32, 50" X 144" SUMMIT GAP BED ENGINE LATHE spndl. spds.: 8–321 RPM, 25 HP drive motor, 35" sw. over bed, approx. 30' dist. btn. centers, (3) roller jaw steadyrests, full length taper attach., rapid traverse, harden and ground bed ways, S/N C592. HERCULES AJAX (KINGSTON) 34" X 196", Mdl. HR5000, 35" sw. over bed, approx. 25-1/8" sw. over crosslide, A1-11 spndl. mount, 4.1" spndl. hole, spds.: 12–1,200 RPM, 20 HP spndl. drive motor, taper at- tach., hard ways, full length inch/ metric thdng., (3) roller jaw steadyrests, pwr. rapid traverse, multiple stop bar, 24" dia. 4-jaw through hole chuck, taper attach., S/N N.A. 40" X 236" DAINICHI HEAVY DUTY ENGINE LATHE 2 AUCTION At the Premises of LAWCO INDUSTRIAL MACHINE INSPECTION: Monday, WORKS, INC. September 10 TUESDAY, SEPTEMBER 11 3047 South Burnside Avenue (Highway 44) 9:00 A.M. to 4:00 P.M. GONZALES, LOUISIANA 70737 & Morning of Sale 10:00 A.M. (See Directions on Back Page) MORI SEIKI 24" X 60", Mdl. MH1500, 16" sw. over crosslide, 3-1/8" spndl. hole, spndl. spds.: 27–1,205 RPM, 10 HP drive motor, 17-1/2" dia. 4-jaw through hole chuck, (2) roller jaw steadyrests, arranged for taper at- tach., S/N 2821. ACRA 22" X 120" GAP BED TYPE, new 2001, approx. 15" sw. over crosslide, 4.1" spndl. hole, spndl. spds.: 13–1,200 RPM, inch/metric thdng., taper attach., Newall 2-axis D.R.O., 34" sw. in gap., 19-1/2" dia. 4-jaw through hole chuck, steadyrest, multiple stock bar, removable gap, S/N 01847. (2) MORI SEIKI 20" X 80", Mdl. 35" X 360" LEHMANN HEAVY DUTY ENGINE LATHE MR2000, 14" sw. over crosslide, 2-1/8" spndl. hole, spds.: 90–1,200 RPM, hard ways, inch/metric thdng., 14" dia. 4-jaw through hole chuck, S/N 2875 eqpd. for taper attach., S/N 2607 eqpd. for hyd. tracing and steadyrest (Auctioneer’s Note: An extended stroke taper attachment and Sauter hyd. tracing attach. for these Mori Seiki machines will be of- fered separately). SUMMIT 16" X 50", Mdl. H, taper at- tach., spndl. spds.: 25–1,500 RPM, 2-1/4" spndl. hole, inch/metric thdng., Jacobs collet chuck, S/N 0222. 34" X 195" HERCULES AJAX (KINGSTON) ENGINE LATHE 200 1 AVA 2 ILA BLE 22" X 120" ACRA GAP BED ENGINE LATHE 20" X 80" MORI SEIKI MR2000 ENGINE LATHES 3 VERTICAL BORING MILLS SCHIESS 124", (approximate dimen- sions) 124" table dia., 148" max. swing, 98.5" max. height under rail, (2) swivel ram heads, pendant control, rapid feed, variable spd. table drive, Reliance 75 HP DC drive motor, (4) low-profile faceplate jaws, diamond plate table catwalk surround w/stairway, S/N N.A. (Auctioneer’s Note: This machine fea- tures floor mounted construction, and does not require a pit). CINCINNATI HYPRO 96", 96" dia. ta- ble, 104" max. swing, 60" max. height under rail, table spds.: .8–30 RPM, 50 HP variable spd. feed drive system, (2) swiveling boring rams w/52" travel, (4) faceplate jaws, S/N N.A. GIDDINGS & LEWIS HYPRO 62", 62" table dia., 67" max. swing 48" max. height under rail, table spds.: 3.3–82 RPM, 50 HP main spndl. drive motor, L.H. swivel boring ram w/32" stroke, R.H. 5 pos. turret, (4) faceplate jaws, rapid traverse, full pendant controls, pwr. rail clamping, S/N N.A. 124" SCHEISS DOUBLE COLUMN VERTICAL BORING MILL 96" CINCINNATI HYPRO DOUBLE COLUMN VERTICAL BORING MILL 62" GIDDINGS & LEWIS HYPRO VERTICAL BORING MILL 4 TABLE TYPE HORIZONTAL BORING MILLS SCHARMANN 4.72", Mdl. WB120, rebuilt by Dorries Scharmann in 11/1995, 4.72" boring spndl. dia., 41" boring spndl. stroke, 56" x 64" built-in rotary table, approx. 72" vert. travel, approx. 63" cross travel, approx. 70" longitu- dinal saddle travel, spndl. spds.: 5.5–1,060 RPM, 15 HP spndl. drive motor, outboard support, Newall 3-axis DRO, built-in facing head, S/N 6605. SUMMIT 4", Mdl. AFD-100, 3.93" boring spndl. dia., No. 5 MT spndl. taper, 28" spndl. stroke, 19.7" built-in facing head, 7" facing head slide stroke, facing head spds.: 12.5– 200 RPM, main spndl. spds.: 12.5–1,250 RPM, approx. 15 HP spndl. drive motor, 43.3" x 51.2" built-in rotary table, 58" cross travel, 45" longitudinal travel, 5,000 KG metric T. REB table weight cap., threading, outboard suppt., 199 UILT 5 right angle attach., pendant control, S/N 115. MF BY R. VERTICAL 4.72" SCHARMANN TABLE TYPE HORIZONTAL BORING MILL TURRET LATHE BULLARD, 54" spiral drive, 3-motor drive, 56" sw. to side head, 5 pos. turret, side head, PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 fine feed, 4-jaw chuck, 25 HP drive motor, for instructions, or go to our website at www.pmi-auction.com. spds.: 8–60 RPM, S/N 21308. 54" BULLARD SPIRAL DRIVE 4" SUMMIT TABLE TYPE HORIZONTAL BORING MILL VERTICAL TURRET LATHE 5 CINCINNATI HYPRO OPEN SIDE PLANER MILL PLANER MILLS GIDDINGS & LEWIS HYPRO OPEN SIDE, 68" x 243-1/4" table, approx. 96" max. machining width, 60" max. height under rail, Pontiac 30 HP rail head and side head, 7-1/2" quill dia., 5" quill travel, milling spndl. spds.: 54–1,000 RPM, full function pendant control, variable spd. table travel, DC table drive, 7-1/2 KW motor generator set, 35 HP table gear drive, S/N N.A. ROCKFORD/FUTUREMILL DOUBLE COLUMN, 48-1/2" dist. btn. uprights, 44" x 145" table size, 144" table stroke, 48" max. height under cross rail, Futuremill milling head: 7" dia. quill, 5" quill stroke, 30 HP drive motor, spds.: 56–890 RPM, retrofitted w/5 HP gear motor screw drive, S/N N.A. ROCKFORD/FUTUREMILL DOUBLE HOUSING PLANER MILL 6 AUCTION At the Premises of LAWCO INDUSTRIAL MACHINE WORKS, INC. 3047 South Burnside Avenue (Highway 44) GONZALES, LOUISIANA 70737 (See Directions on Back Page) TUESDAY, SEPTEMBER 11 10:00 A.M. INSPECTION: Monday, September 10 9:00 A.M. to 4:00 P.M. & Morning of Sale CINCINNATI BICKFORD 5' X 15" SUMMIT 4' X 12" RADIAL ARM DRILL RADIAL ARM DRILL RADIAL ARM DRILLS CNC VERTICAL CINCINNATI BICKFORD 5' X 15", #6 MT spndl. taper, spndl. spds.:8–1,000 MACHINING CENTER RPM, 15 HP main drive motor, pwr. head traverse, pwr. clamping, pwr. elevation, 28" x 24" x 11" tilting box table, L-base w/plain box table, S/N 5NE-30. ENSHU MDL. VMC400, Fanuc 6M CNC control, 16" x 31" travels, 25 pos. auto. tool changer. CINCINNATI BICKFORD 5' X 13", #6 MT spndl. taper, spndl. spds.: 9–1,000 RPM, 15 HP main drive motor, pwr. feeds, pwr. elevation, pwr. clamping, L-base w/box table, S/N 3E1414. 4TH AXIS ROTARY TABLE SUMMIT 4' X 12", spds.: 30–2,200 RPM, 5 HP drive motor, tilting box table, TSUDAKOMA MDL. RNCB-301, 16" sw., Fanuc drive pwr. clamping, #5 MT spndl., S/N N.A. motor, 12" dia. 3-jaw manual chuck, S/N 311735 (Auctioneer’s Note: To be offered separately). VERTICAL TURRET MILLING MACHINES BRIDGEPORT SERIES 1, 2 HP motor, variable spd. head, 9" x 42" table, HYDRAULIC longitudinal pwr. feed, Bridgeport shaping attach., S/N 196401. SURFACE GRINDER SUPERMAX MDL. YC-1-1/2VS, new 1982, 9" x 42" table, variable spd. NICCO 12" X 24", Mdl. NSG630, electromagnetic head, 1-1/2 HP motor, S/N 049238. chuck, incremental downfeed, coolant system ENCO, 9" x 48" table, longitudinal pwr. feed, belt driven head, 1 HP motor, w/vacuum and magnetic separator, over-the-wheel 2-axis D.R.O., S/N N.A. hyd. dresser, S/N K63131. CINCINNATI BICKFORD 5' X 13" BRIDGEPORT SERIES 1 VERTICAL 12" X 24" NICCO HYDRAULIC SURFACE GRINDER RADIAL ARM DRILL TURRET MILLING MACHINE 7 MORRISON KEYSEATER W.F. WELLS MDL. B-25-2 SEMI-AUTOMATIC HORIZONTAL BANDSAW QUALIFIED CARBIDE TURNING TOOLS & INSERTS MISCELLANEOUS MACHINE SHOP EQUIPMENT COMBINATION WRENCHES OF ALL SIZES UP TO 2"; PIPE WRENCHES; ELECTRIC POWER TOOLS INCLUDING DRILLS UP TO 3/4"; RIGHT ANGLE GRINDERS; WORM DRIVES; CIRCULAR SAWS; METAL NIBBLERS; MAGNATRON MDL. NBQ100 MAGNETIC BASE DRILL; SEVERAL CLECO LARGE CAPACITY IMPACT WRENCHES; ARO PNEUMATIC BELT SANDER; QUICKWAY PORTABLE BORING MACHINE, 24" stroke, S/N CL2324; CLIMAX PORTABLE KEYWAY MILL, elec. PARTIAL VIEW OF MACHINE SHOP TAPS UP TO 3" pwrd., V rest base; SEVERAL KEYWAY BROACH SETS; ACCESSORIES DIAMETER L&W AND YUASA INDEXERS; HEAVY DUTY MILLING VISES; ALORIS QUICK CHANGE TOOLPOSTS OF VARIOUS SIZES; WHOLHAUPTER MDL. VHU 4-7/8" HORIZONTAL BANDSAW PRECISION BORING HEAD w/accessories and case; W.F. WELLS & SONS MDL. B 25-2 TWIN COLUMN, 1-1/4" blade, 25" x LARGE ARRAY OF LIFTING EQUIPMENT, including 25" capacity, 5 HP blade drive motor, 10' long hyd. drive barfeed mecha- chains, plate clamps, etc.; LARGE ASSORTMENT OF nism with outboard hyd. vise, 32" max. feed stroke, S/N N.A. HAND TOOLS, including impacts, hand sockets; LARGE ASSORTMENT STRIKER WRENCHES; REVERSING KEYSEATERS TAPPING ATTACHMENTS; RIDGID PIPE THREADING EQUIPMENT; MACHINERY MOVING ROLLERS; LOCK MORRISON, new 1975, mechanical pick feed, 27" x 24" table w/cross brace COLLARS; HUGE ASSORTMENT OF SHIM STEEL; and broach steadyrest, 2 HP broach drive, selection of Morrison tooling, S/N BEARINGS; PLASTICS; FILES; LETTER AND NUMBER K752882. STENCILS; GREASES AND LUBRICANTS; VICTORIA MITTS & MERRILL MDL. 3, arbors, cutters, assorted accessories, S/N PIPE BEVELER; CHAIN FALLS; LARGE ASSORTMENT G4337-3-53. DUMORE TOOLPOST GRINDERS; HAND ARBOR PRESSES; GEAR PULLERS; SHOP FURNISHINGS; EXPENDABLE TOOLING WELDING TABLES; OXY. FUEL CUTTING TABLES; MORSE TAPER SHANK DRILLS UP TO 3-1/16"; DOZENS OF CARBIDE STEP LADDERS; LANDA PRESSURE WASHING TURNING TOOLS; (100s) OF CARBIDE INSERTS OF VARIOUS MACHINE; 12"W. 3-ROLL PYRAMID STYLE ROLLING GRADES AND SHAPES; TAPS OF ALL DESCRIPTIONS; TIN COAT- MACHINE w/gear motor drive; GAS PREHEATERS; ED 2-FLUTE AND 4-FLUTE ENDMILLS, sgl. end and dbl. end; HUGE SEVERAL PEDESTAL GRINDERS UP TO BALDOR 2 HP ASSORTMENT OF PIPE TAPS. w/cast iron stand. 8 FINANCE YOUR AUCTION PURCHASE Conserve Your Cash & Increase Your Bidding Power AuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000 (800) 438-1470 Apply Online: www.AuctionLease.com STEWART WARNER DYNAMIC BALANCER IRD MECHANALYSIS DYNAMIC BALANCER DYNAMIC BALANCERS INCLINED FRAME STEWART WARNER 20,000 LB. CAP., Mdl. 2381, WHEEL PRESS 230 v., Mdl. 708 electronic balancer, 90" max. swing, CUSTOM 400 T. CAP., 11" ram dia., 78" dist. approx. 45' max. dist. btn. roller stands, variable spd. btn. strain bars, 205" dist. ram to end plate, 34" belt drive system. W. moving yoke width. IRD MECHANALYSIS 5,000 LB. CAP., Mdl. B50- 5B, 230 v., Mdl. 245 electronic balancer, 42" sw. MISCELLANEOUS balancing stand w/approx. 80" max. dist. btn. MACHINERY balance stands, 5 HP rotational drive motor w/control KELCO BLAST CABINET, glove box design, set, S/N FS8-1912-FS, SCR S/N 1313-BOA65-10-15, 36"W. x 36" dp. x 24" ht., aux. side glove port, PARTIAL VIEW OF PRECISION S/N G23316. recirculating blast system, S/N 63786. INSTRUMENTS UNITEK MDL. 325S PORTABLE TAP BURNING MACHINE, 110 v., 30 amp, burns from 2 to 3/4" tap size, portable magnetic base stand, S/N 1777. CLAUSING MDL. 2275 DRILL PRESS, variable spd., adj. height table, S/N 507535. GROB 18" VERTICAL BANDSAW, new 1981, Mdl. 4V18, S/N 4105. STONE 20" ABRASIVE CUTOFF SAW, 20 HP drive motor, pneu. chain vise, fume extractor. SELLERS 2-1/2" DRILL GRINDER, Mdl. 4G, S/N E6476. KEMPSMITH MDL. 2 UNIVERSAL TYPE GE HORIZONTAL MILLING MACHINE, 10" x 42" table w/swivel universal saddle, S/N N.A. RAW MATERIAL FORGED STEEL CYLINDERS; LARGE 10-1/4" DIA. X 139-1/2"L. 4340 BAR; LARGE QUANTITY OF HEAVY WALL CARBON STEEL PIPE; STRUCTURAL SHAPES; ALL THREAD; ALUMINUM AND STAINLESS SHAPES AND TUBING; COLD ROLLED BAR STOCK; FLAT STOCK AND STEEL SHEETS; AND MUCH MUCH MORE! PRECISION INSTRUMENTS LARGE ARRAY OF VERNIER CALIPERS UP TO 80"; MICROMETERS UP TO 24"; LARGE ARRAY OF FASTENERS IN SORTED BINS; C-CLAMPS; EYEBOLTS; THREADING DIES; PI TAPES UP TO 144" DIA.; DOZENS OF 12" LOCK JOINT TRANSFER CALIPERS; 6" LOCK JOINT TRANSFER CALIPERS. INCLINED FRAME 400 TON WHEEL PRESS 9 BERTSCH 8' X 3/8" INITIAL PINCH BENDING ROLL INITIAL PINCH WELDERS BENDING ROLL MILLER MDL. FC-6E ARC, 650 amp @ 44 v., 100% duty cycle, S/N HE820402. BERTSCH 8' X 3/8", air drop end, roll indicator dial, MILLER MDL. DIMENSION 452 MIG, Miller Mdl. S60 constant spd. wire feeder, variable spd. drive, 9" upper and lower roll dia., S/N N.A. digital controls, portable cart, S/N N.A. THERMALARC MDL. 400GNS INVERTER TYPE MIG, Miller Mdl. 24V constant CANTILEVER ARM spd. wire feed, roller cart. BURNING MACHINE MILLER MDL. SYNCROWAVE 300 TIG, 300 amp @ 36 v., S/N HJ124382. HEATH MDL. RCEMAG, 8'–96" max. reach, portable MILLER MDL. CP300 MIG, 300 amp @ 32 v., 100% duty cycle, Miller wire feeder, cart mtd., variable spd. controls and control panel, S/N JF845054. oxy. fuel cutting head, S/N 180146. MILLER MDL. DIALARC - 250 AMP AC/DC WELDING POWER SOURCE, on H-FRAME roller stand, S/N N.A. HYDRAULIC PRESS WELDING ACCESSORIES ENERPAC APPROX. 100 T. CAP., elec. drive, adj. BRIDGEPORT MACHINE TOOL WORKS WELDING LATHE, spndl. spds.: 5.3– bed, 48" dist. btn. uprights, 4-1/2" ram dia., S/N N.A. 150 RPM, faceplate drive, approx. 12'L. bed. WELDING POSITIONER, foot pedal control tilt base from horizontal to vertical in PLASMA 15 deg. increments, variable spd. rotation, 18" dia. 3-jaw welding chuck. CUTTING SYSTEMS KEEN ROD OVEN, w/large base. THERMAL DYNAMICS STACK PACK, Mdl. CM6030 DESPATCH ROD OVEN, w/base. control module, (3) Mdl. PM6040 - 35 amp pwr. supplies, plasma cutting torch. HYPERTHERM MDL. POWERMAX 1250, cutting torch, roller cart, S/N 1250-001047. HYPERTHERM PLASMA THERMALARC INVERTER 100 TON CAP. ENERPAC HYDRAULIC H-FRAME PRESS CUTTING SYSTEM MIG WELDER 10 200 200 5 6 NISSAN 6,000 LB. CAP. DIESEL FORKLIFT HYSTER 12,000 LB. CAP. LPG FORKLIFT SULLAIR ROTARY SCREW 3 200 AIR COMPRESSOR FORKLIFTS HYSTER 8,000 LB. CAP. MDL. S80XL, new 1999, LPG, 95" standard mast, 145" lift height, HYSTER 15,000 LB. CAP MDL. S155XL, c u s h i o n tires, side shif t, 42" forks, S / N new 1993, LPG, 82" standard mast, 83" D004D7719W. lift height, cushion tires, side shift, 60" forks, S/N B024D02632P. NISSAN 6,000 LB. CAP. 60 PLATINUM SERIES, new 2005, diesel engine, 187" max. lift, side- HYSTER 12,0 00 LB. CAP. MDL . shifter, digital control panel, load grate, 48" forks, S120XL2, new 1996, LPG, 105" triple- S/N GL02-9M0006. HYSTER 8,000 LB. CAP. FORKLIFT stage mast, 206" lift height, 4-way valving, cushion tires, 42" forks, S / N AIR COMPRESSOR D004D02762T. SULLAIR MDL. 3709/A, new 2006, skid mtd., air CL ARK 10,0 0 0 LB. CAP. MDL . cooled, noise enclosure, S/N 200612200084. C500S100, new 1992, LP, 92" triple-stage mast, 198" lift height, cushion tires, side OFFICE FURNITURE shift, 42" forks, S/N 685-0262-9150KOF. & EQUIPMENT HYSTER 8,000 LB. CAP. MDL. S80XM, ASSORTED METAL AND WOODEN DESKS; new 2003, LPG, 83" standard mast, 122" COPIER; (3) BOX SAFES; BOOKSHELVES; lift height, cushion tires, side shift, 42" EXECUTIVE AND SECRETARIAL CHAIRS; forks, 739.2 hrs., S/N E004V02995A. REFRIGERATOR; GRAINGER CATALOGS. CLARK 10,000 LB. CAP. FORKLIFT INDUSTRIAL REAL ESTATE OFFERED FOR SALE AT AUCTION SUBJECT TO OWNER’S CONFIRMATION OF HIGH BID 2.3 acres fronting Highway 44 with optional additional adjacent acreage available. Approximately 29,000 sq. ft. manufacturing space: main bay: 66'w x 296' w/25' ceiling height; cross bay: 68' w x 46' w/42' ceiling height. Approximately 1,700 sq. ft. of offices, including 24' x 66' brick veneer office building w/(5) private offices, kitchen area and bathrooms. Heavy-duty metal building designed for crane service. (3) 15-ton overhead cranes. 1,200 amp x 480 v. electrical service. Well-lighted, w/metal halide fixtures and skylights. (5) large drive-in doors, natural gas fired unit heaters, complete shop bathrooms, (2) 10' ALL CRANES INCLUDED WITH THE w x 25' long lean-to additions for breakroom and warehouse space. REAL ESTATE SALE This property is located in an insurable region and current insurance was recently renewed. For an appointment to inspect, contact the Houston headquarters offices of PMI at (713) 691-4401. Only a 4% buyer’s premium will apply to the real estate. 11 PLANT & MACHINERY INC. AUCTIONEERS • APPRAISERS • LIQUIDATORS • REAL ESTATE PUBLIC INVITED Presorted First Class Mail P.O. Box 19100 U.S. Postage Houston, TX 77224-9100 TUESDAY, SEPTEMBER 11 • 10:00 A.M. PAID Eugene, Oregon Permit No. 305 LARGE CAPACITY HEAVY MACHINING & REPAIR FACILITY CLOSING Well-Maintained, Large-Capacity Manual Engine ATTENTION: PLANT MANAGER Lathes, Vertical & Horizontal Boring Mills, Milling Machines, Radial Arm Drills, Support Machinery, OR EQUIPMENT BUYER Welding & Fabricating Machines, Material Handling Equipment, & Much, Much More! Plus Industrial Real Estate for Sale Subject to Confirmation AUCTION GONZALES, LOUISIANA INDUSTRIAL PROPERTY FOR SALE PROXY BIDS DIRECTIONS FINANCE YOUR AUCTION PURCHASE If you cannot attend this sale we will bid on your behalf. Contact FROM LOUIS ARMSTRONG NEW Conserve Your Cash & Increase Your Bidding Power Houston office at (713) 691-4401 for instructions, or go to our ORLEANS INT’L AIRPORT: Exit AuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000 website at www.pmi-auction.com. airport. Take I-10 West towards Baton Rouge for approx. 41 miles. (800) 438-1470 Apply Online: www.AuctionLease.com LODGING Exit LA-44/Exit 179 toward Burnside/Gonzales. Turn right onto Holiday Inn ......................................................... (225) 647-7741 Announcing the Formation of the S. Burnside Ave./LA-44 North and 1500 Highway 30, Gonzales, LA proceed approx. 1 mile. Make a Highland Inn ...................................................... (225) 647-5700 u-turn onto S. Burnside Ave./LA-44 R E A L E S TAT E I-10 Exit 177 Highway 30, Gonzales, LA America’s Best Inn & Suites ............................. (225) 647-0964 South and proceed .3 miles. Go to 3047 S. Burnside Ave. Watch for DIVISION 2412 Veterans Boulevard, Gonzales, LA auction signs. Call Us at 1-800-AUCTION for Details TERMS & CONDITIONS A 10% Buyer’s Premium Will Apply. REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY Everything will be sold to the highest bidder or bidders for cash in accordance with the DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises. WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless form any future claim which shall pertain to the fitness or use of that asset as Here is an example of what your letter should be: Mr. “Customer Name” is a customer being purchased. Riggers, movers, electricians and buyers performing work at the of this bank. This bank will guarantee unqualified payment to PMI on the Auction Site must provide PMI with evidence of insurance. The insurance coverage account listed herein up to the amount of $ . This letter is good until must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw October 11, 2007. items, alter the order of the sale, accept bids from the seller, and group lots as it may In default of payment of bills in full within the time therein specified, the Auctioneer in deem appropriate. addition to all other remedies allowed by law, may retain all monies received as deposit Although all information has been obtained from sources deemed reliable, the or otherwise, as liquidated damages. All items must be removed by the time announced auctioneer and seller make no warranty or guarantee, expressed or implied, as to the at the start of the sale. accuracy of the information herein contained, or contained in our catalog. It is for this Lots not paid for and/or removed within the time allowed may be resold at public or reason that buyers should avail themselves of the opportunity to make inspection prior private sale without further notice, and any deficiency, together with all expenses and to the auction. Although it is not likely, auction sales are subject to cancellation or charge of resale, will be charged to the defaulting purchaser. postponement. Kindly contact auctioneer prior to attendance. The buyer acknowledges that he or an agent has inspected all of the assets upon which These terms and conditions may be modified or supplemented by language in the he will be bidding and/or does purchase. catalog available at the sale site or by announcement at the start of the sale. Bidders Buyer agrees to accept assets purchased “AS IS,” “WITH ALL FAULTS” and “WITH should be attentive to those announcements and to the catalog language. IP-7210966
"AUCTION horizontal boring"