IM172 Complete System Acceptance Form by hkksew3563rd

VIEWS: 9 PAGES: 4

									                             COMMERCIAL IN CONFIDENCE




                                  Vistar
                     VNV 172 PART 3 SECTION 3

                             Complete IM172

                 System Acceptance Record Form



                 REFERENCE


                 CUSTOMER/CRAFT




IM172-3-03.doc                         Revised: 06/2003 DRH           Part 1
issue 1.1                       Master last printed: 15/07/2003   Page 1 of 4
                                        COMMERCIAL IN CONFIDENCE



         Acceptance Procedure
         The procedure for carrying out this acceptance is laid down in:
         VNV 172 PART 4 SECTION 3
         Complete IM172 System Setting Procedure Up and Test Specification

2.2      Particulars

         Video standard

         IIU height above waterline                                                                           Feet

         Range Marker EPROM data

         Range marker switch settings                             SW1                        SW2

         Illuminator beam colour

         Components
            Unit       Part Number      Serial Number                     Unit       Part Number   Serial Number
             IIU       SM                                                 ICC       SM
           Control     SM                                               Display     SM
            PBB        SM                                                 ICB       SM
                       SM                                                 ICB       SM
             ITB       SM                                             Illuminator   IM
             ITB       SM                                             Illuminator   IM
             ITB       SM                                             Illuminator   IM
             ITB       SM                                             Illuminator   IM
            PSU                                                         Junction    SM
                                                                        Junction    SM


         Cables
            Cable         Length        Serial Number                     Cable          Length    Serial Number
           CM21                                                         CM132
           CM31                                                         CM133
           CM31P                                                        CM134
           CM31P                                                        CM136
           CM131


         Other Items
         Owners Manual                        System Test Procedure
         Installation Manual                  Factory Acceptance
         Acceptance Form                      Mounting Kits


IM172-3-03.doc                                      Revised: 06/2003 DRH                                    Part 1
issue 1.1                                    Master last printed: 15/07/2003                            Page 2 of 4
                                       COMMERCIAL IN CONFIDENCE



         Test Results
           2.3    Test Type

3        Installation Inspection
                                                                              Results   Parameters
           3.1    Image Intensifier Unit                                                Accepted
           3.2    Control Unit                                                          Accepted
           3.3    Display Unit                                                          Accepted
           3.4    Illuminator Control Box                                               Accepted
           3.5    Illuminator Transformer Boxes                                         Accepted
           3.6    Infra Red Illuminators                                                Accepted
           3.7    Cables                                                                Accepted
           3.8    Power Supply                                                          Accepted


4        System Testing

           4.1    Current Consumption                                                   <2 Amps
           4.2    Current, All Running                                                  <4 Amps
           4.3    Current with ICB2                                                       Amps
           4.4    Earth Leakage Test                                                    Accepted


5        Control Unit

           5.1    Power Switch                                                          Accepted
           5.2    Range Markers                                                         Accepted
           5.3    Horizon                                                               Accepted
           5.4    Visor                                                                 Accepted
           5.5    Density                                                               Accepted
           5.6    Dimmer                                                                  >50%
           5.7    Contrast                                                              Accepted
           5.8    Illuminators                                                          Accepted
           5.9    Wipe                                                                  Accepted
           5.10   Wash                                                                  Accepted


6        Display Unit Controls

           6.1    Image Quality                                                         Accepted
           6.2    Image Intensity                                                       Accepted
           6.3    Black Level                                                           Accepted
           6.4    Dimmer                                                                Accepted


IM172-3-03.doc                                     Revised: 06/2003 DRH                       Part 1
issue 1.1                                   Master last printed: 15/07/2003               Page 3 of 4
                                          COMMERCIAL IN CONFIDENCE


7        Illuminators

           7.1       Illuminator On/Off                                                                  Accepted
           7.2       Beam Shape and Colour                                                               Accepted
                     Illuminator Supply Voltage High                                                     Volts AC
           7.3
                     Illuminator Supply Voltage Low                                                      Volts AC


8        Soak Test

           8.1       Test Time                                                                            Hours


9        Acceptance

                     Test Engineers


                     Date


                 The complete equipment encompassing the appropriate units has been found to be acceptable.


                     Customer
                     Sign
                     Supplier
                     Sign
                     Date


         Notes




IM172-3-03.doc                                       Revised: 06/2003 DRH                                         Part 1
issue 1.1                                     Master last printed: 15/07/2003                                 Page 4 of 4

								
To top