OAP SERIES by gyvwpsjkko

VIEWS: 15 PAGES: 16

									                  OAP SERIES                            CONTENTS
      ELECTRONIC PRICE COMPUTING SCALE
                                                        1. INSTALLATION


               OPERATION MANUAL                         2. SPECIFICATIONS


                                                        3. KEYBOARD, PANEL LAYOUT AND DESCRIPTION


PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE           4. INITIAL SETUP
         ATTEMPT TO OPERATE THE SCALE
                                                        5. INSTRUCTION FOR USE


                                                        6. TROUBLE SHOOTING

                                                        7. DAILY CARE AND MAINTENANCE

                                                        APPENDIX A
                                                        COUNTRY CODE AND EURO EXCHANGE RATE




                            September 1999 REV 2


Specifications subject to change without prior notice
1. INSTALLATION                                      b. Before first time use, plug the main
                                                        adaptor into the wall outlet and charge
1.1 Check and make sure that the following              the scale for at least 8 hours.
    accessories are included:
    This operation manual                            c. Retain the packing materials for future
    Scale x 1                                           transportation purposes.
    Platter x 1
    Power adaptor x 1                              Caution:
    Dust cover x 1                                 This unit is legal for trade only when it is
                                                   sealed (and/or stamped) and bearing a serial
Contact your dealer if any item missed.            number. Do not attempt to break the seal (or
                                                   stamp) affixed to this scale or remove the
1.2 Insert the platter into the scale carefully.   serial number. Contact your dealer for more
    No excessive force is required.                information and after sales service.


1.3 POWER ON THE SCALE                             For most accurate weighing result, do not use
  a. Before plugging the power adaptor into        this scale in where or when the environment
     electricity outlet, check and make sure       condition falls beyond as those listed on
     that the input voltage of power adaptor       SPECIFICATIONS.
     matches with the output voltage of the
     outlet. If not, do not plug in the adaptor,   Do not attempt to open this unit or conduct
     contact your dealer immediately.              any trouble shootings other than those listed
                                                   on TROUBLE SHOOTING.
2. SPECIFICATIONS                                  3. KEYBOARD, PANEL LAYOUT AND
                                                      DESCRIPTION
 Model No.     OAP-6     OAP-15   OAP-30
 Capacity      6000g     15kg     30kg
                                                   3.1 KEYBOARD LAYOUT
 Division      2g        0.005kg 0.01kg
 Tare Range    1998g     4.995kg 9.990kg
 Power-on Zero ¡600g     ¡1.5kg   ¡3.0kg
 Range
 Zero Range    ¡120g     ¡0.3kg   ¡0.6kg
 Min. Load     40g       0.1kg    0.2kg
                o   o      o    o
 Operation     0 ~40 C (32 ~104 F),
 Environment   Non-condensed. R.H.¡ 85%
 Power source By Built-in rechargeable
               battery or power adaptor
 Specifications subject to change without notice


NOTE:
This scale contains of built-in exchange rate
between some national currencies and EURO.
Contact your dealer for more information.
3.2 FRONT PANEL LAYOUT   3.4 KEYS AND PANELS DESCRIPTION


                         1. NUMERIC AND DECIMAL KEYS
                         Press these keys to attain the desired numeric
                         value.


                         2. CLEAR KEY
                         Press this key to clear the numeric figure just
                         entered or quit from function in process.


                         3. TARE KEY
                         Press this key to tare off the weight of a
                         container. Refer to SPECIFICATIONS for maximum
                         tare range.

3.3 REAR PANEL LAYOUT
                         4. ZERO KEY
                         Press this key to set weight to zero. Refer
                         to SPECIFICATIONS for maximum zero range.


                         5. FIXED UNIT PRICE KEY
                         Press this key to enter a fixed unit price.
6. NATIONAL CURRENCY/EURO CONVERSION KEY         10. PLU RECALL KEY
Press this key to show the total price payable   Press this key followed by 2-digit PLU location
(in national currency) in equivalent Euro        number to recall the unit price stored in the
value.                                           corresponding PLU location.


Refer to APPENDIX A COUNTRY CODE AND EURO        11. DIRECT PLU   KEYS
EXCHANGE RATE for country code, scale code and   Press these keys to recall the unit price stored
built-in exchange rate between 11 national       in this PLU location.
currencies and EURO.
                                                 12. WEIGHT PANEL
7. PLU SET KEY                                   The weight detected is shown here.
Press this key to set a unit price to PLU.
                                                 13. UNIT PRICE PANEL
8. NATIONAL CURRENCY UNIT PRICE KEY              The current unit price entered is shown here.
Press this key to change unit price mode from
EURO and to national currency.                   14. TOTAL PRICE PANEL
                                                 Price to pay of the current transaction is shown
9. EURO UNIT PRICE KEY                           here.
Press this key to change unit price mode from
national currency to EURO.                       15. ZERO INDICATOR
                                                 An arrow will appear and point at this sign
                                                 to indicate a zero weight status.
16. TARE INDICATOR                                This indicator would not be displayed when Euro
An arrow will appear and point at this sign       is chosen as default currency. Contact your
to indicate the tare function is in operation.    dealer for more information.
The weight being displayed on the Weight Window
is the net weight.                                20. NATIONAL CURRENCY UNIT PRICE INDICATOR
                                                  An arrow will appear and point at this sign
17. LO-BAT INDICATOR                              to indicate the value being shown on the Total
This indicator will appear when the battery       Price Window is in term of national currency.
inside scale faded out. Recharge the scale
immediately. Failure to do so may cause           This indicator will not be displayed if country
unrecoverable   damages    to   the   built-in    setting is Euro. Contact your dealer for more
rechargeable battery.                             information.


18. FIXED UNIT PRICE INDICATOR                    21. CHARGING INDICATOR
An arrow will appear and point at this sign       This dual color indicator shows the recharging
to indicate the fixed unit price function is      status of the built-in rechargeable battery.
in operation.                                     Red color: Recharging battery
                                                  Green color: Charging completed
19. EURO UNIT PRICE INDICATOR
An arrow will appear and point at this sign       POWER KEY
to indicate the value being shown on the Total    The power key is located at the left-hand bottom
Price Window is in term of Euro.                  edge   of   the   scale.    Press    this   key
                                                  forward/backward to turn scale on/off.
4. INITIAL SETUP                                    a. Turn scale off
                                                    b. Press and hold TARE, then turn scale on.
4.1 PLACING THE SCALE                               c. Scale displays F.1.
In order to obtain an accurate weighing result,     d. Press TARE until scale displays F.3.
the scale must be placed on a strong and level      e. Press NC/EURO.
surface.                                            f. Scale shows the current country setting and
                                                       Euro exchange rate on the unit price and Total
If   required,   adjust   the   adjustable   feet      Price Window.
underneath scale to obtain a level position.        g. Refer to APPENDIX A for country code, scale
Refer to the bubble indicator for leveling             code and exchange rate. Make sure that both
condition.                                             settings are correct.
                                                    h. Press @NC to set power on unit = national
4.2 INTERNAL SETTING                                   currency, or press @EURO to set power on unit
                                                       = EURO.
4.2.1 Check Country Setting, Exchange Rate,         i. Press ZERO to return to operation status.
       Power On Unit Price Base
This unit contains built-in exchange rates          CAUTION:
between your national currency and EURO.            Should country code or Euro exchange rate
                                                    setting is not correct, do not use this scale.
Before first time use, follow the below steps       Contact your dealer immediately.
to check and make sure that the country setting
and the EURO exchange rate against your local       4.2.2 Select Auto Power Off Setting
currency and power on unit price base (EURO         The scale is equipped with AUTO POWER OFF
or national currency) are both correct.             FUNCTION.
Under this function, the scale will be turned        4.3.1 Disable Backlight
off automatically if it is not used for 4 minutes.   Press   0   and   then   press ZERO   to   disable
Follow the below steps to enable/disable the         backlight.
AUTO POWER OFF FUNCTION.
a. Turn scale off.                                   4.3.2 Turn Backlight On: - Power Saving Mode
b. Press and hold TARE, then turn scale on.          Press 1 and then press ZERO to enable power
c. Scale displays F.1.                               saving backlight
d. Press TARE until scale displays F.4.
e. Press NC/EURO to shift between 0._OFF and         Under this mode, backlight will be turned off
   4._OFF.                                           after it has been left idle for 20 seconds.
** To enable the AUTO POWER OFF FUNCTION, press
   ZERO when 4._OFF appears.                         Backlight will be automatically turned on again
** To disable the AUTO POWER OFF FUNCTION,           when a new weight is detected or when a key
   press NC/EURO when 0._OFF appears.                is pressed.
f. After ZERO is pressed, the scale returns
   to operation status.                              4.3.3 Turn Backlight On: - Continuous Mode
                                                     Press 2 and then press ZERO to turn backlight
4.3 BACKLIGHT (OPTION) SETTINGS                      on.
Follow the below steps to disable or change
backlight (option) setting.                          Under this mode, the backlight will remain
                                                     powered on until the backlight is manually
NOTE: Only change the backlight settings             turned off (by 4.3.1 method) or a new backlight
       before entering a unit price.                 command (4.3.2) is entered.
4.4 UNIT PRICE LOOKUP (PLU)                      d. Enter 2-digit PLU location number or press
This unit is equipped with 99 PLUs (unit price      CL twice to quit.
lookups). PLU location number 01 to 09 can be    e. Once the 2-digit PLU location number is
accessed by one of the DIRECT PLU KEYS.             entered, the scale will store the unit price
                                                    into memory in two seconds. Within this 1
To access PLU locations 10 to 99, press the         second, press CL twice to quit or PLU SET
appropriate the 2-digit PLU location number         to enter a new PLU location.
through the numeric keys.
                                                 4.4.2 To Recall the Unit Price from PLU
Follow the below procedures to store/recall      Unit prices stored in location 01 to 09 can
a unit price to/from a PLU location.             be recalled by pressing the DIRECT PLU KEYS.


4.4.1 To Store a Unit Price to PLU               Follow the below procedures to recall a unit
a. Select unit price base in Euro or national    price stored in location 10 to 99.
   currency. The corresponding unit price base   a. Press PLU RECALL. The TOTAL PRICE PANEL
   indicator will appear.                           displays PLU?
b. Key in unit price value. The unit price       b. Enter 2-digit PLU location number or press
   entered will be displayed on the UNIT PRICE      CL twice to quit.
   PANEL.                                        c. The PLU location number entered would be
NOTE: Refer to 5.3.2 and 5.3.3 for unit price       displayed for about 1 second on the TOTAL
       entering.                                    PRICE PANEL.
c. Press PLU SET. The TOTAL PRICE PANEL
   displays PLU?
d. The unit price stored is displayed on the        5. INSTRUCTION FOR USE
   UNIT PRICE PANEL.
NOTE: If the unit price base (e.g. national         5.1 BEFORE WEIGHING
currency) of the PLU location is contradictory      Make sure that:
to the default setting (e.g. EURO only) of scale,   a. The platter is inserted firmly into the
a zero unit price will be displayed. Contact           scale.
your dealer for more information.                   b. The scale is placed on a level and strong
                                                       surface.
4.4.3 To Clear Unit Price from PLU                  c. The scale is turned on.
A unit price stored in a PLU location can be
erased by entering a zero or new unit price.        5.2 SET DISPLAYED VALUE TO ZERO WHEN UNLOADED
                                                    If zero weight cannot be obtained when unloaded,
                                                    press ZERO. After ZERO is pressed, the ZERO
                                                    INDICATOR would appear.


                                                    Refer to SPECIFICATIONS for maximum zero range.


                                                    5.3 TRANSACTION WEIGHING


                                                    5.3.1 Place the Article
                                                    Place an article on the platter. The weight
                                                    of the article is shown on the Weight Window.


                                                    5.3.2 Select the Correct Unit Price Base
Make sure that the right unit price base             c. By pressing the PLU RECALL KEY followed by
(national currency or EURO) is being employed.          a 2-digit PLU location.


If not, press @EURO or @NC to correct.               Once the unit price is entered, the price to
a. Press @EURO to employ Euro unit price base,       pay of the article will be shown on the TOTAL
   or,                                               PRICE PANEL.
b. Press @NC to employ national currency unit
   price base.                                       NOTE: Refer to 4.4 for more information about
c. After    @EURO   or   @NC   is   pressed,   the   PLU functions.
   corresponding UNIT PRICE INDICATOR would
   appear on the UNIT PRICE and TOTAL PRICE          5.3.4 Show Price to Pay in Euro
   PANEL.                                            a. Press NC/EURO.
                                                     b. The unit will display Euro on the UNIT PRICE
NOTE: The power on unit price base is the default       PANEL and the equivalent price to pay in
base of the scale. Refer to 4.2.1 for power             EURO will be displayed on the TOTAL PRICE
on unit price base setting.                             PANEL.
                                                     c. The unit will return to national currency
5.3.3 Enter the Unit Price                              mode again after about 3 seconds.
The unit price can be entered by one of the          d. Should a longer time of price to pay in EURO
following methods.                                      is needed, hold NC/EURO.
                                                     NOTE:
a. By making use of the numeric keys and decimal     a. The conversion function is effective only
   keys, or,                                            when an appropriate country is selected
b. By pressing the appropriate DIRECT PLU               during default set up. Contact your dealer
   RECALL KEY, or,                                      for more information.
b. The conversion function works only when the     After TARE is pressed, the TARE INDICATOR would
   weight is stable.                               appear. Refer to SPECIFICATIONS for maximum
c. An audio alarm will be generated if the EURO    tare range.
   unit price base is already selected when
   pressing NC/EURO.                               Refer   to    5.3   for   transaction   weighing
                                                   procedures. Weight displayed under this mode
5.4 FOLLOW-UP TRANSACTIONS
                                                   is the net weight of the subject article.
When the present transaction is completed,
remove all loads from the platter.
                                                   5.4 HOW TO CLEAR THE TARE FUNCTION
                                                   Remove all loads from platter then press TARE.
A zero weight is now showed on the WEIGHT PANEL
                                                   After TARE is pressed, the TARE INDICATOR would
while the previous unit price changes to zero.
                                                   disappear.

Refer   5.3.1    to    5.3.4   for   follow-up
                                                   5.7 FIXED UNIT PRICE FUNCTION
transactions.
                                                   The FIXED UNIT PRICE FUNCTION can be utilized
                                                   when a same unit price is used for continuous
5.5 HOW TO TARE OFF THE WEIGHT OF A CONTAINER
                                                   transactions.
When a container is used, follow the below steps
to tare the weight of the container off to get
a net weight result.
a. Remove all loads away from platter
b. Make sure that the ZERO INDICATOR is on.
c. Place the container on the platter.
d. Press TARE
5.7.1 Employ the FIXED UNIT PRICE FUNCTION         NOTE:   Even    though    the   FIXED   UNIT    PRICE
Follow the below steps to enable the FIXED UNIT    FUNCTION is now cancelled, the unit price will
PRICE FUNCTION                                     remain displayed on the UNIT PRICE PANEL. Press
a. Press F before or after entering the unit       CL to clear or enter a new unit price before
   price. Refer to 5.3.2 and 5.3.3 for unit        next transaction.
   price entering.
b. The fixed unit price entered is now displayed   5.8 RECHARGE THE SCALE
   on the UNIT PRICE PANEL and the FIXED UNIT      The   scale    is    equipped   with    a     built-in
   PRICE INDICATOR is turned on.                   rechargeable        battery.    When    the    LO-BAT
c. Should a container is used, refer to 5.4        indicator      appears,    recharge      the    scale
   to tare off the weight of it.                   immediately. Failure to do so may cause
d. Place an article onto the platter, the price    unrecoverable damages to the rechargeable
   to pay is displayed on the TOTAL PRICE PANEL.   battery.
e. Remove the article from platter. The unit
   price will remain on the UNIT PRICE PANEL.      The scale can remain in operation when being
f. Repeat c, d and e for follow-up transactions.   recharged. Charging is completed when the
                                                   IN-CHARGE indicator turns green.
5.8.2 Disable the FIXED UNIT PRICE FUNCTION
a. Press F again to disable the FIXED UNIT PRICE
   FUNCTION.
b. The FIXED UNIT PRICE INDICATOR is now turned
   off.
6. TROUBLE SHOOTING                                Syndrome   Rated capacity cannot be reached
                                                   Check      Is the TARE INDICATOR on?
Syndrome   Scale cannot be turned on               Action:    Turn the scale off. Remove all loads
Check:     Is the scale charged?                              from platter and turn on again.
Action:    Recharge the scale for at least 8       Check      Is there anything obstructing the
           hours before first time use or plug                platter?
           in the power adaptor before power       Action     Remove all obstacles.
           on the scale.
Check      Is   the   power   adaptor   inserted   Syndrome   When turning on scale, all display
           properly into both the electricity                 window blank out but only the Zero
           outlet and the DC inlet of scale?                  and TARE INDICATOR appear
Action:    Secure both ends of the power adaptor   Check      Is any load applied to platter when
           and try again.                                     turning scale on?
                                                   Action:    Turn scale off. Remove all loads from
Syndrome   Scale turned off automatically                     platter and turn scale on again.
Check      Is the Auto Power Off function          Check      Is the platter inserted properly?
           employed?                               Action:    Turn   scale   off.   Insert   platter
Action     Refer to 4.2.2 to disable the Auto                 properly and turn scale on again.
           Power Off function.
Check      Is the LO-BAT indicator on?
Action     Apply the power adaptor.
Syndrome   Weight and Total Price Window blank       7. DAILY CARE AND MAINTENANCE
           out during operation
Check      Does the load applied to platter          7.1   Clean the scale with a soft and damp cloth.
           exceed the rated capacity of scale?             If necessary, apply a mild detergent.
Action     Remove all loads from platter and         7.2   Do not use any harsh, abrasive material,
           try again.                                      acetone, volatile solvent, thinner or
                                                           alcohol for cleaning.
Syndrome   Weighing result is not accurate           7.3   Verify      the        accuracy    of     scale
Check      Is the scale placed in a level                  periodically.
           condition?                                      Note: In some countries, calibration is
Action     Adjust the adjustable feet to a level           restricted        to     be     done     by     an
           condition.                                      authorized/qualified            agent     only.
Check      Is the scale affected by airflow,               Contact      your        dealer    for        more
           vibration or RFI?                               information.
Action:    Place   the   scale   away   from   all   7.4   It is a good practice to apply the dust
           disturbances.                                   cover when operating the scale.
Check      Is the scale calibrated correctly?        7.5   The scale must be placed horizontally
Action     Contact your dealer.                            during transportation or long time
                                                           storage.
                                                     7.6   Remove     platter       from   scale    before
                                                           transportation or long time storage.
                                                     7.7   Store scale in a dry and clean place.


                                                     APPENDIX A
COUNTRY CODE AND EURO EXCHANGE RATE

                                 Exchange Rate
              Currency
COUNTRY                Scale Code Against Euro
                Code
                                 13.7603
Austria         ATS      6_A75
                                 40.3399
Belgium         BEF      7_Bef
                                 5.94573
Finland         FIM      4_FI3
                                 6.55957
France          FRF      5_FrF
                                 1.95583
Germany         DEM      2_DE3
                                 0. 787564
Ireland         IEP      1_IEP
                                 1936.27
Italy           ITL      A_17L
                                 40.3399
Luxembourg      LUF      7_Bef
                                 2.20371
Netherlands     NLG      3_NL6
                                 166.386
Spain           ESP      8_ESP
                                 200.482
Portugal        PTE      9_P7E
                                 1.00000
Euro            Euro     Euro

								
To top