DENT PRO – PORTABLE DENT PULLER The DENT PRO – PORTABLE DENT PULLER is a rugged locally manufactured and designed dent pulling unit which allows for significant time and cost savings when repairing small to medium sized dents. The DENT PRO is a machine that has proven itself in the field over a number of years. Continuous development, and a countrywide maintenance and service network have ensured the long-term success of the product. The low cost of this machine can be recouped within a very short period as the time and cost savings are tremendous. The DENT PRO can remove small to medium damage from panels without the need to strip interior trim, remove battery terminals or replace entire body panels. The copper shrinking device allows for a smooth finish that is ready for painting. It’s rugged design and extremely simple operation is ideally suited to local conditions and operating requirements. TECHNICAL and GENERAL SPECIFICATIONS: Each DENT PRO comes standard with 5 pulling pins and a pulling lever. Weight 15kg - including pulling lever Dimensions (cm) 20x30x50 Power Requirements 220/240v Frequency 50/60Hz Current 20A The DENT PRO Dent Puller has been endorsed by: SAMBRA (2003/2004) VW SA (Since 2001) Delta Motor Corporation (2000) Daimler Chrysler (2001) 1 year limited warranty from date of delivery Hundreds of satisfied panel beaters have experienced the benefits of this machine. The DENT PRO has become an indispensable tool in their business. Get one today and make it an indispensable part of your business too.