"Oracle Database Histor"
eXPert automation and control integrated system eXPert run time environment is a complete product suite that allows the development of industrial automation and control systems; eXPert software components can be distributed on LAN/WAN connected nodes (PC) and can be configured in compliance with the particular plant characteristics and requirements. eXPert consist of both hardware, field connected, data acquisition, regulation/control devices and elaboration software packages (plant data management, historian, alarming, graphical visualization) running on Windows 2000/XP platform. s.d.i. automazione industriale Trezzano S/N – Pisa www.sdiautomazione.it Hardware devices (being part of the STAR product line) are grouped in specifically designed for telecontrol eXPert field data applications. acquisition and μSTAR and ηSTAR peripheral telecontrol control product equipment is the low cost solution for family that consists geographically distributed data of: the STAR series acquisition. (acquisition and RTU devices can connect to supervisory regulation stations) used in building DCS centre using PSTN, GSM or radio systems (distributed control systems) and modem. μSTAR series (RTUs: remote terminal units), specific for telecontrol applications. STAR units (STation for data Acquisition and Regulation) are programmable logic controllers of the latest generation; they provide to all functions of PLC, LOOP and MULTILOOP controllers. STAR provides field data acquisition and plant control functions defined as level 0: automation, regulation, logics and sequences, blocks. STAR is one of the main components of the s.d.i. automazione eXPert DCS system. It is completely configurable, from a remote development PC unit. Automation and control logic are defined using functional block diagram written using an IEC 1131-3 conformant editor. Low power carachteristics of μSTAR RTU allows the use of solar energy and batteries for device power supply. μSTAR equipment has been used in public utilities services, such as public light management systems, semaphoring network control, waste water, water depuration plants, gas distribution and storage; all telecontrol systems were widely distributed on geographic area. s.d.i. automazione industriale developed a field data acquisition and control unit s.d.i. automazione industriale Trezzano S/N – Pisa www.sdiautomazione.it Field data acquisition and protocol implementation is provided by the I/O Server component. In case of telecontrol systems I/O Server provides also to communication lines management, and multiple protocols/communication media support, allowing connection with different data acquisition devices (RTU, PLC, data logger) on different communication media (PSTN and ISDN telephone lines, GSM, radio bridge, WAN, LAN). Connectivity tools are also provided, allowing geographically distributed telecontrol applications; multiple networked SCADA systems (in hierarchical or flat connectivity architecture), telephone remote alarming (Remote Alarming), web enabled plant display visualization (WEB HMI). eXPert run time environment is the software package used in automation and control systems. It consist of SCADA, HMI, Historian stations, SoftPLC, I/O Servers providing field data acquisition and (if needed) communication lines management. eXPert integrated development tools between plant and/or calculated variables provide an engineering and maintenance defined for I/O Servers, SCADA dynamic station that allow databases, plant displays, historian the definition of the system. whole automation and control system: field and calculated data tags, displays, popup control faceplates, reports, historical data, application programs. Main tools are: HMI graphical display editor, SCADA dynamic database editor, Soft Logic Editor, an IEC 1131-3 conformant regulation and control logic editor, Historian and I/O Server administration utilities. eXPert integrated development tools provides, from a single PC, the complete configuration and on- line maintenance and up-grade of the automation system; the full integration of configuration tools allow a strong data consistency control between the different system functionalities, in particular s.d.i. automazione industriale Trezzano S/N – Pisa www.sdiautomazione.it Field device for data acquisition • Modular programmable logic controller STAR (STation for data Acquisition and Regulation) o STAR OHF is used in Ethernet TCP/IP connection with SCADA system; STAR is one of the main components of the s.d.i. automazione expert DCS system. o STAR/CSB is connected via serial interface using IEC 870-5-101 protocol. A multidrop STAR/CSB configuration is used for distributed I/O. o Modular rack mounted I/O boards for analog or digital signal management: boards for regulation LOOP. o Redundant CPU and redundant network configuration is provided. o Multiple STAR distributed on the plant LAN. o Remote I/O configuration. o Fieldbus management. • RTU microSTAR and nanoSTAR o Single board RTU with modular I/O o LAN connection: optical fiber, copper wire o Connection to control centre using telephone PSTN, GSM, radio bridge connections. • Functions present on all STAR devices o Regulation and logic definition using IEC 1131-3 standard. o Remote configuration (download of logic and firmware) o Buffered/Unbuffered Alarms management, local mesurements archives o Spontaneous Events Signaling Field data acquisition (I/O Server) • Multiple Protocol, multiple communication media management • Optimized management of pool lines. • Compact architecture (SCADA and I/O Server on the same station) or distributed architecture (I/O Server on dedicated stations connected su stazioni dedicate connesse in LAN Ethernet TCP/IP) • Redundant I/O Server on dedicated PC • Support for new lines types and/or protocols • Telephone lines Linee telefoniche PSTN, ISDN, GSM; Linee telefoniche dedicate. • Serial line Protocols RS232, RS485. • Ethernet TCP/IP Protocols. • Field Protocols: o IEC 870-5-101 o IEC 870-5-104 o IEC 61850 o MMS UCA.2 o OPC o MODBUS o PROFIBUS o SELTA SASP/SASP o SELTA TIC1000 o SIEMENS S5 AS511 o SIEMENS S7 Ethernet TCP/IP (Send/Receive) o FIP o SDI INET o SDI AA55 • Sub centre connection: o Serial Connection with IEC 870-5-101 or 104 protocol o PSTN connection using IEC 870-5-101 protocol with Selta/Siemens extension s.d.i. automazione industriale Trezzano S/N – Pisa www.sdiautomazione.it SCADA, HMI • System architecture and general characteristic: o Client/Server architecture based on SCADA server and HMI client; o Windows Operating Systems: Windows XP, Windows 2003 Server; o Redundant Master/Slave hot stand by configuration. o Redundant field network; o Redundant system network (SCADA – HMI – I/O Server); o Graphic controllers compatibility Windows2000/NT/XP; o Up to 8 log and report printers; o Local Hard copy printers on LAN Ethernet; o Historical data archives on relational database or file. • SCADA o Run-time data base structured based on point types o Standard calculation and devices management o Non standard customizable calculations o Multiple alarms database o Plant zone and using hierarchical run time database and alarms definition o SCADA system and network redundancy • Connectivity o Connection to external system on Ethernet and TCP/IP protocol. o OPC SERVER o DLL for access to DBS SCADA (ISA library) o Configuration Toolkit and run-time connection management for SCADA networks (SCADA data link) • HMI o Graphical page editing (object oriented) o ActiveX objects integration o Animation editing o Use of POL language (Process Oriented Language) or C. o Remote internet based HMI (Web HMI) Historian station • Multiple Historian stations • Multiple types of database • Relational database interface (using ADO and ODBC) • Databases support: o Base version with Database MSDE (Microsoft Data Engine) o Access version o Binary Files o Microsoft SQL Server o Oracle 9i • HMI integration for historical graphical data visualization. s.d.i. automazione industriale Trezzano S/N – Pisa www.sdiautomazione.it s.d.i automazione industriale s.r.l. 20090 Trezzano s/n (MI) – via Edison, 10 tel. 0248486.1 – fax 0248486248 56125 Pisa – Lungarno Guadalongo, 4 tel. 050500004 – fax 050500122 e-mail: email@example.com web: http://www.sdiautomazione.it REV: NO:10 s.d.i. automazione industriale Trezzano S/N – Pisa www.sdiautomazione.it