CAT-2 HEAVY-DUTY LABEL REWINDERS(1)

Document Sample
CAT-2  HEAVY-DUTY LABEL REWINDERS(1) Powered By Docstoc
					 LABELMATE
                                              “cat-2”
               Heavy-Duty Label Rewinders (Page 1 of 2)
                                               tm
 LABELMATE’s Constant Adjustable Torque             ("CAT") technology has made the silent, easy-to-use CAT-2
 the "Industry Standard" Label Rewinder.

                                                                                           tm
 The top of the line CAT-2-CHUCK includes LABELMATE’s durable "Quick-Chuck" quick-locking Core
                         Chuck, permitting the fastest loading and unloading of cores and label rolls. The
                         CAT-2-CHUCK is ideal for label slitting applications, high-volume production
                         environments, or anywhere the ultimate convenience in Rewinders is desired. The
                         CAT-2-CHUCK is available for 1.5", 40-mm, 70-mm, 3" (76-mm) or 4” cores. The
                         handy outer flange included with the 3” CAT-2-CHUCK guides the outer edge of
                         the label web being rewound. Torque and Direction are fully controllable from the
                         Control Panel.




                          The standard CAT-2 has a Fin-Style Core Holder. It handles labels up to 6-inches
                          wide and will wind a roll of labels up to a 12-inch diameter.

                                   For wider labels up to 10-inches wide, choose the
                                   CAT-2- W10.. For maximum convenience, choose
                                   the CAT –2-CHUCK-10. (shown at right)




                         With the Model CAT-2-R16-CHUCK (shown at left), you can rewind label
                         rolls up to 16-inches (40-cm) in diameter.




      Model CAT-2-ACH includes an Adjustable Core Holder that accepts any core
      size from 1-inch to 4-inches in diameter and up to 6-inches in width. The optional
      Adjustable Paper Guide APG-CAT with movable arm can be installed in minutes
      on the base of the CAT-2-ACH. This inexpensive accessory guides the outer
      edge of the label roll as it's being rewound to ensure even roll alignment.


 LABELMATE Heavy-Duty "CAT" Rewinders are designed for continuous duty operation. Rugged, heavy-
 gauge steel construction allows your CAT-2 Rewinder to be simply set in place. Special anti-slip feet keep
 the unit from moving. The CAT-2 handles any rewind job and with its "HIGH" torque range can also power
 the LABELMATE S-100 or S-200 Label Slitters. Reliable, high quality and maintenance-free, the Heavy-Duty
 CAT-2 Label Rewinders feature a 5-Year Parts and Labor Limited Warranty, the longest in the industry.

 Put LABELMATE CAT-2 Label Rewinders to work for you today and enjoy a new dimension in label
 rewinding convenience and reliability. Custom colors, badging, and special core holders are available for
 private label applications.             See Page 2 for available models and specifications.


The World’s Leading Manufacturer of Label Dispensers, Rewinders, Unwinders, Slitters & Core Chucks
                 LABELMATE LLC, 12A Sunset Way, Henderson, NV 89014-2002 USA
                     Toll-Free! (877) 833-7149 (702) 435-8535 FAX (702) 435-8536
                  www.labelmate.com                      E-mail: info@labelmate.com
                                       LABELMATE Europe, Brussels, Belgium
 LABELMATE                           “CAT-2” Heavy-Duty Label Rewinders                                   (Page 2 of 2)


 Full Size "CAT-2" Heavy-Duty Label Rewinders And Options
                  ADD                                                                                                 ROLL
  MODEL                   CORE                           DESCRIPTION                                  WIDTH                             SPEED
                 SUFFIX                                                                                             DIAMETER
             -1-INCH       1” dia.   Heavy-duty Label Rewinder with two label Flanges.                                Up to 8.6”
                                     Standard Model “CAT-2” Heavy-duty Label Rewinder
             (NONE)          3”      with 3- fins to hold the rewind core. Includes two label         Up to 6”
                                     flanges.
                                     Premium Heavy-duty Label Rewinder with an easy
             -CHUCK         3”   *   loading “Quick-Chuck”™ and two label flanges.
             -CHUCK-
                             3”
                                     Premium Heavy-duty Label Rewinder with an easy                     Up to         Up to 12”
             8.5                     loading “Quick-Chuck”™ and two label flanges.                      8.5”
                                     10” wide Heavy-duty Label Rewinder w/6 core holding
             -W10            3”
                                     fins. Includes two label flanges.                                  Up to
                                     Premium Wide Heavy-duty Label Rewinder with an                      10”
             -CHUCK-10       3”
                                     easy loading “Quick-Chuck”™ and two label flanges.                                                 Up to 30
   CAT-2
                                                                                                                                          ips
             -R16-                   Deluxe CAT-2 with 16” roll diameter, with a “Quick-
             CHUCK          3”   *   Chuck”, Adjustable Paper Guide and extra power.
                                                                                                      Up to 6”        Up to 16”

                                     Heavy-duty Label Rewinder with a universal
                            1” to    Adjustable Core Holder for any core size within the
             -ACH                                                                                     Up to 6”        Up to 11”
                             4”      range of 1” to 4” in diameter. Recommended: Optional
                                     APG-CAT Adjustable Paper Guide Arm.
                                     Optional factory-installed Tension Arm that shuts off
             -TA            Any      your CAT-2 Rewinder when labels stop coming from                 Choose          Up to 12”
                                     your printer. Not for R16 Models.
                                     Optional factory-installed Sensor Arm to shut off your
                                     CAT-2 Rewinder when labels stop coming from your
             -SENSOR        Any                                                                       Choose          Up to 12”
                                     printer. Not for R16 Models.
                                     Designed for use with the VIP Color VP2020 printer.
                                     Optional Adjustable Paper Guide Arm for the                                                        Installs
   APG-
             -              Any      CAT-2-ACH. Guides the outer edge of the label web to                N/A              N/A              in
   CAT
                                     ensure an even roll edge.                                                                          minutes.
                                     Allows use of 6” inside diameter core. Pair of Adapters
  ADAPT-
         -                   6”      for use on a 3” diameter CAT-2-CHUCK.                               N/A              N/A           Per pair.
   326
                                     (Rewinder & labels are not included.)

 * The CAT-2-CHUCK is available for 1.5", 40-mm, 70-mm, 3" (76-mm) or 4” diameter cores. 4” diameter is extra cost.


                                                CAT-2 SPECIFICATIONS:

          All models are bi-directional.
          "TORQUE ADJUST" - Continuously adjustable torque control
          "TORQUE RANGE" - NORMAL (REWIND), HIGH (SLIT)
          "EXTERNAL HALT CONTROL" - External control removes power to the motor and applies braking.
           Use is optional and not required.
          Dimensions: 12.75H x 15W x 12.5D" (324 x 381 x 318mm). CAT-2-R16: 18H x 15W x 18D"
          Base plate footprint: 7 x 15" (180 x 356mm). Weight: Approximately 23- to 28-lbs (10.5 to 12.7kg)
          Power Requirements: 120-vac 60Hz 50 va max. UL/CSA Listed Power Supply. 220-240vac 50Hz
           also available.
          Warranty: 5-Year Parts and Labor Limited Warranty, the longest in the industry. (One-Year
           Limited Warranty on included Power Supply Module.)
                                                                              Specifications are subject to change without notice. DATACAT2.   2006-09




The World’s Leading Manufacturer of Label Dispensers, Rewinders, Unwinders, Slitters & Core Chucks
                 LABELMATE LLC, 12A Sunset Way, Henderson, NV 89014-2002 USA
                     Toll-Free! (877) 833-7149 (702) 435-8535 FAX (702) 435-8536
                  www.labelmate.com                      E-mail: info@labelmate.com
                                              LABELMATE Europe, Brussels, Belgium

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:6
posted:3/3/2011
language:English
pages:2
Lingjuan Ma Lingjuan Ma
About