Immersion suits_ cabinets and light by suchenfz

VIEWS: 66 PAGES: 2

									                                                                            Immersion suits, cabinets and light



                                                        Immersion suits

Description:
The immersion suits supplied by Barwil Unitor are manufactured to comply with
SOLAS-74 as amended Reg. III/4, III/7., III/.4, III/., III/4, and X/ 0f 98
amendments and LSA code res. MSC 48(66) and Certified to MED 96/98EC.


Customer benefits:
– All models have a yellow neoprene base material with orange outer layer
  giving high visibility and increased rescue chances.
– The attached gloves and hood ensure a faster donning.
– The buddy line will enable you to attach to a fellow crewmember for extra
  safety.
– A face flap is attached for additional insulation.
– SOLAS reflective tape is used for higher visibility.
– Donning instructions printed on the suit and bag.
– Guaranteed quality, each suit is pressure tested.
– The suit is supplied in different sizes for the right fit.

The model V0 is the standard model produced of 5mm neoprene and is equipped
with a Buoyancy pillow, Helicopter lifting harness, Light and buddy line.
Therefore this suit can be worn without additional lifejacket.

The model V40, has the same features as the V0, but is produced of 7mm neo-
prene, given it a 0% less warmth emission, so recommend for using in very cold
areas.

The model V0 OP, is the same as the standard model, but is supplied without
buoyancy pillow, helicopter harness and light.
Therefore this suit must be worn with additional life jacket.

Approvals: All suits are MED (Wheelmark) approved. The V0 and V40 are also
Russian type approved.


Ordering information:
    Product no.                   Description                        Size
    80 740464                Unitor V0 size 45               (0 – 50 cm)
    80 7859                Unitor V0 size 65               (60 – 85 cm)
    80 6760                Unitor V0 size 85               (65 – 90 cm)
    80 6760                Unitor V0 size 05               (85 – 0 cm)
    80 78584                Unitor V40 size 65               (60 – 85 cm)
    80 6768                Unitor V40 size 85               (65 – 90 cm)
    80 6766                Unitor V40 size 05               (85 – 0 cm)
    80 78600               Unitor V0 OP size 65             (60 – 85 cm)
    80 7945               Unitor V0 OP size 85             (65 – 90 cm)
    80 7944               Unitor V0 OP size 05             (85 – 0 cm)

Other sizes are available on request.




                                                        65
Immersion suits, cabinets and light



                                                                                         Immersion suit Light

                                      Barwil Unitor offers  types of Immersion suits lights that also can be used for
                                      Lifejackets.

                                      The WAB-MX8 is a water-activated rescue light for attachment to Lifejackets and
                                      Immersion suits. The light is in compliance with the requirements of SOLAS LSA
                                      code res. MSC 48(66) and certified to MED 96/98 and USCG.

                                      The AQO light is a water-activated rescue light for attachment to lifejackets and
                                      Immersion suits. The light is in compliance with the requirements of SOLAS LSA
                                      code res. MSC 48(66) and certified to MED 96/98


                                      Ordering information:
                                       Product no.      Description
                                       8 67875       WAB-MX8 Light
                                       8 75886       AQO




                                                                            Storage cabinets for Immersion suits

                                      Barwil Unitor has a range of storage cabinets that are made of GRP, they can be used for Lifejackets and Immersion suits storage.

                                      The range is as follows,

                                        Product nr.      Description           Weight in Kg         Size (mm) l x b x h        BASIC         STANDARD          ARCTIC
                                        8 57660       Cabinet size                              765 x 665 x 460           4 suits         4 suits         4 suits
                                        8 5766       Cabinet size             5                8 x 786 x 695           suits        0 suits         8 suits
                                        8 57669       Cabinet size                             75 x 70 x 750          4 suits         suits        0 suits
                                        8 57667       Cabinet size 4            47                65 x 70 x 665          6 suits        6 suits        4 suits

								
To top