ULC Catalogue - Underwriters Laboratories Inc

Document Sample
ULC Catalogue - Underwriters Laboratories Inc Powered By Docstoc
					                                                                                     CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                            AND OTHER RECOGNIZED DOCUMENTS
                                                                                   CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                           ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

CAN/ULC-S101-07         Standard Methods of Fire       This Standard covers fire endurance tests applicable to walls, partitions, floors, roofs, ceilings, columns, beams,   13.220.50     $190.00
                        Endurance Tests of             and girders, as well as to some components of these building sub-assemblies. It is the intent that the fire            19.040
                        Building Construction and      endurance period established by this test method indicates performance only during the fire exposure period
                        Materials                      and shall not be construed as having determined suitability for use after fire exposure.
CAN/ULC-S101-07         Méthodes normalisées           La présente norme porte sur les essais de résistance au feu effectués sur les murs, les cloisons, les planchers,      13.220.50     $190.00
                        d'essai de résistance au feu   les toits, les poteaux, les poutres, les poutrelles et sur certains éléments de ces sous ensembles de construction.    19.040
                        pour les bâtiments et les      La période de résistance au feu établie par cette méthode d'essai est une façon d'indiquer le rendement de
                        matérieux de construction      l'élément pendant une exposition au feu; elle ne détermine pas si l'élément peut être utilisé après son exposition
                                                       au feu.
CAN/ULC-S102-07         Method of Test for Surface This method of test for surface burning characteristics of building materials is applicable to any type of building       13.220.50     $175.00
                        Burning Characteristics of material that, by its own structural qualities or the manner in which it is applied, is capable of supporting itself in    19.040
                        Building Materials and     position or may be supported in the test furnace as described in this standard or in a manner comparable to its
                        Assemblies                 recommended use.

CAN/ULC-S102-07         Méthode d'essai normalisée La présente méthode d'essai permettant d'établir les caractéristiques de combustion des matériaux de                      13.220.50     $175.00
                        caractéristiques de        construction                                                                                                               19.040
                        combustion superficielle    s'applique à tous les types de matériaux de construction qui, par leurs propres qualités structurales ou par la
                        des matériaux de           façon
                        construction et             dont ils sont appliqués, sont en mesure de demeurer en position de façon autonome ou peuvent être soutenus
                        assemblages                dans
CAN/ULC-S102.2-07       Method of Test for Surface This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm.         13.220.40     $150.00
                        Burning Characteristics of This method is also applicable to the following:                                                                          13.220.50
                        Flooring, Floor Coverings,  A     Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102 without the use of                      19.040
                        and Miscellaneous          supporting                                                                                                                 91.180
                        Materials and Assemblies         material that is not representative of the intended installation;
                                                    B Materials which, when tested in the manner described in Clause 1.1 of CAN/ULC-S102, melt and drip, or
                                                        otherwise disintegrate and continue to burn on the floor of the test chamber;
                                                    C Materials that are designed for use in a relatively horizontal position with only its top surface exposed to air;
                                                   or
CAN/ULC-S102.2-07       Méthode d'essai normalisée La présente norme s'applique à une surface finie ou à un revêtement de sol d'une épaisseur maximale de 65 mm.             13.220.40     $150.00
                        caractéristiques de        Cette méthode peut aussi s'appliquer aux matériaux suivants :                                                             13.220.50
                        combustion superficielle    A    Matériaux qui ne peuvent être soumis à l'essai, comme le décrit la section 1.1 de la norme CAN/ULC S102,             19.040
                        des revêtements de sol et        sans l'utilisation d'un matériau de soutien qui n'est pas représentatif de l'installation visée;                     91.180
                        des divers matériaux et     B    Matériaux qui, lorsqu'ils sont soumis à l'essai de la manière décrite à la section 1.1 de la norme
                        assemblages                      CAN/ULC S102, fondent et dégouttent, ou se désintègrent et continuent de brûler sur le sol de la chambre
                                                         d'essai;
                                                    C    Matériaux conçus pour être utilisés en position relativement horizontale où seulement la partie supérieure
                                                         est exposée à l'air; ou
                                                    D    Matériaux thermoplastiques.

CAN/ULC-S102.3-07       Standard Method of Fire       This test method is applicable to materials employed in light diffusers and lenses. The testing procedure described    13.220.50     $150.00
                        Test of Light Diffusers and   herein is intended to assess the propensity of material employed in light diffusers and lenses to fall from its         19.040
                        Lenses                        installed                                                                                                              91.160.10
                                                      position before igniting when subjected to test fire exposure conditions in CAN/ULC-S102, as required in the
                                                      National Building Code of Canada 2005, Volume 1, Clause 3.1.13.4 1 (b).
CAN/ULC-S102.3-07       Méthode d'essai normalisée La présente méthode d'essai s'applique aux matériaux utilisés dans les diffuseurs et verres d'appareils d'éclairage.      13.220.50     $150.00
                        de résistance au feu pour     La procédure d'essai décrite aux présentes vise à évaluer l'aptitude du matériau utilisé dans les diffuseurs et         19.040
                        les diffuseurs et verres      verres                                                                                                                 91.160.10
                        d'appareils d'éclairage       d'appareils d'éclairage à tomber de sa position initiale avant de s'enflammer lorsqu'il est soumis aux conditions
                                                      d'exposition de l'essai de résistance au feu énoncées dans la norme CAN/ULC S102, conformément aux
                                                      exigences
CAN/ULC-S102.4-07       Standard Method of Test       This test method is for use in determining values of flame propagation distance and smoke optical density              13.220.40     $150.00
                        for Fire and Smoke            for electrical and optical-fibre cables that are to be installed in ducts, plenums, and other spaces used for           19.040
                        Characteristics of Electrical environmental air without the cables being enclosed in metallic raceways in those spaces. This method                   29.060
                        Wiring and Cables             also determines values of flame propagation distance and smoke optical density for electrical and optical
                                                      -fibre cables with combustible jackets or sheathes to determine their acceptability for use in buildings of
                                                      non-combustible construction.

                                                       Although this method utilizes the same test apparatus as in CAN/ULC-S102, Standard Methods of Test for
                                                       Surface Burning Characteristics, it does not determine surface burning characteristics of electrical wiring
                                                       and cables.

                                                       This test method does not cover the construction requirements for cables or their electrical and other
                                                       performance requirements.


CAN/ULC-S102.4-07       Méthode d'essai normalisée     Cette méthode d'essai est utilisée pour déterminer les valeurs de distance de propagation de la flamme et de          13.220.40     $150.00
                        caractéristiques de             densité optique de la fumée des câbles électriques et des câbles de fibres optiques qui doivent être installés        19.040
                        résistance au feu et à la       dans les conduits, les plénums et les autres espaces utilisés pour l'air environnemental sans que les câbles          29.060
                        fumée des fils et câbles        qui se trouvent dans ces espaces ne soient protégés par des canalisations métalliques. Cette méthode permet
                        électriques                     également de déterminer les valeurs de distance de propagation de la flamme et de densité optique de la fumée
                                                       des
                                                        fils et câbles électriques et des câbles de fibres optiques à gaine ou enveloppe combustible pour déterminer s'ils
                                                       sont
                                                       autorisés dans des bâtiments de construction incombustible.

                                                       Bien que la présente méthode utilise le même appareil d'essai que celui décrit dans la norme CAN/ULC-S102
                                                       intitulée
                                                       Méthode d'essai normalisée caractéristiques de combustion superficielle, elle ne détermine pas les
                                                       caractéristiques
                                                       de combustion superficielle des fils et câbles électriques.
CAN4-S103-1983(R2000)   Standard Specification For     These Requirements cover the design and construction of "tin-clad" fire doors which have demonstrated in fire         13.220.50     $110.00
                        “Tin-Clad” Fire Doors          tests, fire performance properties sufficient to warrant their use in closure assemblies having a fire protection
                        Meeting The Performance        rating of up to and including 3 h, when tested in accordance with the Standard Method for Fire Tests of Door
                        Required By S104               Assemblies, CAN4-S104.

CAN4-S103-1983(R2000)   Sépecification normalisée      Les présentes exigences portent sur la conception et la fabrication des portes coupe-feu à revêtement métallique      13.220.50     $110.00
                        pour portes coupe-feu à        qui ont démontré, lors des essais de comportement au feu, une résistance suffisante pour justifier leur utilisation
                        revêtement métallique          dans les ensembles ayant un degré pare-flammes d'au plus 3 h, lorsqu'ils sont mis à l'essai conformément à la
                        satisfaisant aux exigences     norme CAN4-S104, "Méthode normalisée d'essais de comportement au feu des portes".
                        de la norme CAN4-S104

CAN4-S104-M80(R1985)    Standard Method for Fire       This fire test method is applicable to door assemblies of various materials and types of construction, for use in     13.220.50     $110.00
Amendments 1-3          Tests of Door Assemblies       wall openings to retard the passage of fire. Tests made in conformity with this test method will register
                                                       performance during the test exposure; but such tests shall not be construed as determining suitability for use
                                                       after exposure to fire. It is the intent that tests made in conformity with this Standard will develop data to
                                                       enable regulatory bodies to determine the suitability of door assemblies for use in locations where fire
                                                       resistance of a specified duration is required.




                                                                                                                                                                                          Page 1 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                               ICS CODE    PRICE (CDN)

CAN4-S104-M80(R1985)    Méthode normalisée des    La présente méthode d'essai de comportement au feu s'applique auxportes de divers matériaux et types                        13.220.50     $110.00
Modifications 1-3       essais de comportement au de construction, destinées à être utilisées dans des baies pratiquées dans les murs pourretarder le passage
                        feu des portes            du feu. Les essais effectués conformément à la présente méthode permettront d'enrigistrer le rendement pendant
                                                  l'éssai. Toutefois, ces essais ne déterminent pas si les portes sont encore utilisables après exposition au feu.
                                                  Les essais effectués selon laprésente méthode fournissent des données qui permettent aux organismes de
                                                  réglementation de déterminer si des portes peuventêtre utilisées dans des endroits où un degré de résistance au
                                                  feu précis est exigé.

CAN4-S105-M85(R1992)    Standard Specification for     These requirements cover frame assemblies having a fire protection rating of up to and including 3 h as                13.220.50     $110.00
Amendment 1             Fire Door Frames Meeting       determined by the Standard Method of Fire Tests of Door Assemblies, CAN4-S104.
                        the Performance Required
                        by CAN4-S104

CAN4-S105-M85(R1992)    Norme sur les cadres de        Ces exigences portent sur les cadres des portes coupe-feu à battant simple. Ces cadres ont démontré, au cours          13.220.50     $110.00
Modification 1          porte coupe-feu satisfaisant   des essais de résistance au feu, un rendement suffisant pour être utilisés avec des portes coupe-feu d'un indice
                        aux exigences de               allant jusqu'à 3 h lorsqu'ils sont mis à l'essai conformément à la Méthode normalisée des essais de
                        rendement de la norme          comportement au feu des portes, CAN4-S104M. Les cadres peuvent permettre l'installation de traverses ou de
                        CAN4-S104                      meneaux.

CAN4-S106-M80(R1985)    Standard Method for Fire  This Method of Test applies to window and glass block assemblies and other light transmitting assemblies, for use           13.220.50     $110.00
                        Tests of Window and Glass in walls and partitions that are fire separations. Tests made in conformity with this test method will register             81.040.20
                        Block Assemblies          performance during the test exposure and develop data to enable regulatory bodies to determine the suitability of           31.060.50
                                                  window assemblies for use in wall and partition openings where fire protection is required. Such tests shall not be
                                                  construed as determining suitability of window assemblies for continued use after fire exposure.

CAN4-S106-M80(R1985)    Méthode normalisée des         La présente méthode d’essai de comportement au feu s’applique aux fenêtres et aux briques de verre ainsi               13.220.50     $110.00
                        essais de eomportement au      qu’aux autres ensembles permettant la transmission lumineuse, utilisés dans les murs et cloisons formant               81.040.20
                        feu des fenêtres et des        des séparations coupe-feu. Les essais effectués conformément à la présente méthode permettront                         31.060.50
                        briques de verre               d’enregistrer le rendement pendant l’essai et de fournir des données permettant aux organismes de régle-
                                                       mentation de déterminer les qualités requises des fenêtres pour les murs et les cloisons où une résistance
                                                       au feu est nécessaire. Ces essais ne déterminent pas si les fenêtres sont encore utilisables après
                                                       exposition au feu.

CAN/ULC-S107-03         Methods of Fire Tests of       The test methods described in this Standard are applicable to roof covering materials and are intended to measure      13.220.50     $130.00
                        Roof Coverings                 the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources          91.060.20
                                                       outside
                                                       a building on which they may be installed. They are applicable to roof coverings intended for installation on either
                                                       combustible or non-combustible decks when applied as intended for use.

CAN/ULC-S107-03         Méthodes normalisées           Les méthodes d’essai de la présente norme s’appliquent aux matériaux de couverture et servent a mesurer leurs          13.220.50     $130.00
                        d'essai de résistance au feu   caractéristiques de comportement au feu lorsqu’ils sont exposes a un feu dont l’origine est a l’extérieur du           91.060.20
                        des matériaux de               bâtiment sur lequel ils sont poses. Elles s’appliquent aux matériaux de couverture destines a être installes
                        couverture                     sue des platelages de toit combustible ou incombustibles, lorsqu’ils sont de la façon prévue.

CAN/ULC-S109-03         Flame Tests of Flame           These requirements apply to the performance in flame-exposure tests of flame-resistant fabrics of natural,             59.080.30     $130.00
                        Resistant Fabrics and          synthetic or combination of natural and synthetic fibers, or plastic films intended for such use as tents,             83.140.10
                        Films                          awnings, draperies or decorations. The flame resistance of the fabric or film may be inherent in the                   13.220.40
                                                       material used or may be the result of chemical treatment to retard ignition and spread of flame.                       13.220.50


CAN/ULC-S109-03         Norme relative aux essais      La présentes exigences s’appliquent a la tenue au feu lors d’essais d’exposition a la flamme des tissus                59.080.30     $130.00
                        de comportement au feu         ininflammables en fibres naturelles, synthétiques ou d’une combinaison des deux, ou de matières plastiques             83.140.10
                        des tissus et pellicules       et qui sont destinées a la fabrication de tentes, d’auvents, de rideaux ou de décorations. La résistance au            13.220.40
                        ininflammables                 feu des tissus ou des pellicules peut être inhérente aux matériaux ou traitement chimique visant a retarder            13.220.50
                                                       l’inflammation et la propagation de la flame.



CAN/ULC-S110-07         Standard Methods of Test       These test methods apply to materials for the fabrication of air duct systems for use in accordance with the           91.140.30     $150.00
                        for Air Ducts                  requirements of the current edition of the National Building Code of Canada.The materials covered by these
                                                       requirements include preformed lengths of flexible or rigid ducts, materials in the form of boards for field
                                                       fabrication of lengths of rigid ducts, and preformed flexible connectors.




                                                                                                                                                                                           Page 2 of 39
                                                                                        CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                               AND OTHER RECOGNIZED DOCUMENTS
                                                                                      CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                              ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.       TITLE                          ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

CAN/ULC-S110-07             Méthodes normalisées           S'applique aux matériaux servant à la fabrication des conduitsd'air utilisés conformément aux exigences de            91.140.30     $150.00
                            d’essai des conduits d'air     l'édition en vigueur du Code national du bâtiment du Canada. Les matériaux auxquelss'appliquent ces
                                                           exigences comprennent les sections de conduitsrigides ou flexibles fabriquées en usine, les matériaux
                                                           sousforme de plaques servant à la fabrication de conduits rigides surplace et les raccords flexibles fabriqués
                                                           en usine.



ULC-S111-07                 Standard Method of Fire        These requirements cover air filter units of both washable and throw-away types for removal of dust and other         13.220.50     $130.00
                            Tests For Air Filter Units     airborne particles from air circulated mechanically in equipment and systems.                                         91.140.30

CAN/ULC-S112-M90 (R2001)    Standard Methods of Fire       These requirements and methods of test apply to fire-damper assemblies rated ¾ h, 1 h, 1 ½ h, 2h, or 3h for use       13.220.30     $110.00
                            Test of Fire-Damper            in air-conditioning and ventilating system ducts or openings (without ducts) piercing horizontally or vertically       19.040
                            Assemblies                     oriented fire separations where the fire separations are required to have a fire resistance rating of not more than   91.140.30
                                                           4h. These fire-damper assemblies are intended for installation in accordance with the provincial or municipal
                                                           building regulations that are based on the National Building Code of Canada.



CAN/ULC-S112-M90(R2001)     Méthode normalisée d'essai Les présentes exigences et méthodes d'essai s'appliquent auxregistres coupe-feu ayant une résistance au feu               13.220.30     $110.00
                            de comportement au feu     de 3/4h, 1h,1-1/2h, 2h ou 3h et utilisés dans les conduits ou ouvertures(sans conduits) des systèmes de                    19.040
                            des registres coupe-feu    conditionnement de l'air et deventilation traversant des séparations coupe-feu horizontales ouverticales lorsque          91.140.30
                                                       ces séparations coupe-feu doivent avoir undegré de résistance au feu de 4h ou moins.


CAN/ULC-S112.1-M90(R2001)   Standard for Leakage           These requirements cover leakage rated dampers intended for use in heating, ventilating and air conditioning           13.040       $110.00
Amendment 1                 Rated Dampers for Use in       (HVAC) systems. Leakage rated dampers are intended to restrict the spread of smoke in HVAC systems that               13.220.20
                            Smoke Control Systems          are designed to be automatically shutdown in the event of a fire or to control the movement of smoke within a          23.060
                                                           building when the HVAC system is operational in engineered smoke control systems.                                     91.140.30


CAN4-S112.2-M84             Standard Method of Fire        These requirements cover the test procedure for the performance evaluation of ceiling firestop flap assemblies        13.220.50     $110.00
Amendment 1                 Test of Ceiling Firestop       which may or may not be part of an air diffusion device, intended for use in fire resistive floor-ceiling and
                            Flap Assemblies                roof-ceiling assemblies.

CAN4-S112.2-M84 (R2001)     Méthode normalisée des    Les présentes exigences d'essai permettent d'évaluer le rendementdes clapets coupe-feu situés dans les                     13.220.50     $110.00
Modification 1              essais de comportement au plafonds qui peuvent fairepartie intégrante ou non de diffuseurs d'air destinés à êtreutilisés dans les en-                91.060.30
                            feu des clapets coupe-feu sembles planchers-plafonds et toits-plafondsrésistants au feu.
                            situés dans les plafonds

CAN/ULC-S113-07             Standard Specification for     These requirements cover the design and construction of Wood Core Flush Doors, which have shown by fire               13.220.50     $145.00
                            Wood Core Doors Meeting        tests to possess sufficient fire-retardant properties to warrant a 20 minute fire protection rating when tested       91.060.50
                            the Performance Required       in accordance with the Standard Method for Fire Tests of Door Assemblies, CAN/ULC-S104.
                            by CAN/ULC-S104 for
                            Twenty Minute Fire Rated
                            Closure Assemblies

CAN/ULC-S113-07             Spécification de norme         Les présentes exigences portent sur la conception et laconstruction des portes planes à âme de bois qui ont           13.220.50     $145.00
                            portes à âme de bois           subi desessais de résistance au feu démontrant qu'elles peuvent assurerune protection contre le feu de 20             91.060.50
                            satisfaisant aux exigences     minutes, ces essais étanteffectués en conformité avec la méthode normalisée d'essais decomportement au
                            de rendement de CAN/ULC-       feu des portes CAN/ULC-S104.
                            S104 pour les dispositifs de
                            fermeture ayant un degré
                            de résistance au feu de
                            vingt minutes




                                                                                                                                                                                              Page 3 of 39
                                                                                        CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                               AND OTHER RECOGNIZED DOCUMENTS
                                                                                      CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                              ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.      TITLE                          ABSTRACT                                                                                                                  ICS CODE    PRICE (CDN)

CAN/ULC-S114-05            Standard Method of Test        This Standard provides a means of determining the non-combustible nature of elementary building materials. It             13.220.50     $130.00
                           for Determination of Non-      shall be applied to materials used in the construction of buildings. It does not apply to materials with a decorative
                           Combustibility in Building     or protective coating, or impregnation, or built up of laminations of dissimilar materials.
                           Materials

CAN/ULC-S114-05            Méthode d’essai normalisée La présente norme permet de déterminer la nature non combustible des matériaux de construction de base. Elle                  13.220.50     $130.00
                           pour la détermination de   s'applique aux matériaux utilisés dans la construction de bâtiments. Elle ne s'applique pas aux matériaux à
                           l’incombustibilité des     revêtement décoratif ou protecteur, ou à imprégnation, ou faits de lamelles de matériaux dissemblables.
                           matériaux de construction

CAN/ULC-S115-05            Standard Method of Fire        This method of test is applicable to firestop systems with or without penetrating items. These firestop systems are       13.220.20     $150.00
                           Tests of Firestop Systems      intended for use in openings in fire resistive wall and floor assemblies and membranes forming part of an                  19.040
                                                          assembly required to have a fire resistance rating and linear openings between adjacent fire resistive floor
                                                          assemblies, wall assemblies or both.


CAN/ULC-S115-05            Méthode normalisée d'essai La présente méthode d'essai s'applique aux dispositifs coupe-feu avec ou sans éléments passants. Ces dispositifs              13.220.20     $150.00
                           de comportement au feu     coupe-feu sont destinés à une utilisation dans les ouvertures d'éléments de murs et de planchers résistants au                 19.040
                           des ensembles coupe-feu feu et de membranes faisant partie intégrante d'un ensemble, qui doit avoir un indice de résistance au feu, et des
                                                      ouvertures linéaires entre éléments de planchers, ou éléments de murs adjacents résistants au feu, ou les deux.


CAN4-S117.1-M85(R1999)     Standard Method of Test        This method determines the flammability of finished textile floor covering materials when exposed to an ignition          13.220.50     $110.00
Amendments 1-2             for Flame Resistance –         source (methenamine tablet) under specified conditions.This method is applicable to all types of textile floor            59.080.60
                           Methenamine Tablet Test        coverings regardless of fibre type or method of construction.This document does not purport to address all the
                           for Textile Floor Coverings    safety aspects associated with its use. Anyone using this test method has the responsibility to consult the
                                                          appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing
                                                          applicable regulatory requirements prior to its use.



CAN4-S117.1-M85 (R1999)    Méthode d’essai                La présente méthode a pour objet de déterminer l'inflammabilité desrevêtements de sol textiles, à l'état fini,            13.220.50     $110.00
Modifications 1-2          normalisée: Résistance à       lorsqu'ils sont exposés à unesource d'allumage (tablette de méthénamine), dans des conditions prescrites.                 59.080.60
                           l'information - essai à la     La présente méthode s'applique à tous les types de revêtements de soltextiles quels que soient leur com-
                           tablette de méthénamine        position ou le procédé utilisé pour leurfabrication. Cette méthode décrit l'essai d'un seul spécimen. Elle doit
                           des revêtements de sol         être utiliséeavec un plan d'échantillonnage valable du point de vue statistique et basé surun minimum de 10
                           textiles                       spécimens. Remarque : En vertu des exigences de la Loi sur les produits dangereux régissant les revêtements
                                                          de sol mous, le nombre de spécimens qui doivent être éprouvés est fixé par la norme CAN/CGSB-4.155M,
                                                          Résistance à l'inflammabilité des revêtements de sol mous - Plans d'échantillonnage.(Modification n° 1, janvier
                                                          1992, ajout de l'article 1.4) Cette méthode d'essai peut nécessiter l'utilisation de matériaux oud'équipement,
                                                          ou les deux, pouvant être dangereux. Ce document n'a pas pour objet d'aborder toutes les questions de
                                                          sécurité liées à cette méthode. Avantd'utiliser cette dernière, toute personne doit consulter les pouvoirs
                                                          intéressés et établir des mesures appropriées de sécurité et de protection dela santé, tout en se conformant
                                                          aux exigences obligatoires pertinentes envigueur.(Modification n° 1, janvier 1992, ajout de l'article 1.4)

CAN/ULC-S124-06            Standard Method of Test        These requirements cover the temperature transmission performance of a protective covering over foamed                    13.220.50     $145.00
                           for the Evaluation of          plastic when the assembly is subjected to a standard fire exposure condition.                                              91.180
                           Protective Coverings for
                           Foamed Plastic
CAN/ULC-S124-06            Méthode d’essai normalisée     Permet d'évaluer le rendement, dans la transmission detempérature, des revêtements protecteurs appliqués sur              13.220.50     $145.00
                           évaluation des revêtements     lesmousses plastiques lorsqu'ils sont soumis aux conditionsd'exposition au feu normalisées.                                91.180
                           protecteurs des mousses
                           plastiques
CAN/ULC-S126-06            Standard Method of Test        This test method provides a means of measuring the contribution of roof-deck assembly components to the                   13.220.50     $145.00
                           for Fire Spread Under Roof-    spread of fire on the underside of the roof deck.                                                                         91.060.20
                           Deck Assemblies
CAN/ULC-S126-06            Méthode normalisée d'essai     Permet d'établir dans quelle mesure les composants de platelagesde toits contribuent à la propagation des                 13.220.50     $145.00
                           propagation des flammes        flammes sur la faceinférieure des platelages.                                                                             91.060.20
                           sous les platelages de toits

CAN/ULC-S127-07            Standard Corner Wall           This method of test for flammability characteristics is applicable to certain low density insulating materials that do    13.22.050     $175.00
                           Method of Test for             not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread                     19.040
                           Flammability                   Classification for those foamed plastics whose flammability assessment by CAN/ULC-S102 requires the use of                91.060.10
                           Characteristics of Non-        the
                           Melting Foam Plastic           rate formula FSV = 92.5 d/t but where the necessary parameters ('d' & 't') for use in the formula are difficult to
                           Building Materials             define.

                                                          The purpose of this test is to determine the comparative burning characteristics of the material under test by
CAN/ULC-S127-07            Méthode d'essai normalisée     exposing
                                                          La présente méthode d'essai visant à déterminer les caractéristiques d'inflammabilité s'applique à certains               13.22.050     $175.00
                           d'allumageen coin visant à     matériaux                                                                                                                  19.040
                           déterminer les                 isolants basse densité qui ne fondent pas ou qui ne dégouttent pas pendant l'exposition au feu (se reporter à             91.060.10
                           caractéristiques               l'annexe
                           d'inflammabilité des           A). Elle est utilisée pour établir l'indice de propagation de la flamme des mousses plastiques dont l'évaluation de
                           matériaux de construction      l'inflammabilité lors de l'essai décrit dans la norme CAN/ULC S102 exige l'utilisation de la formule de calcul de
                           en mousse plastique à          l'indice
                           l'épreuve de la fusion         VPF = 92,5 d/t, mais où les paramètres nécessaires (« d » et « t ») à utiliser dans la formule sont difficiles à
                                                          définir.

                           Standard Method Of Test        This Standard applies to thermal insulation suitable for de combustion comparatives du matériau soumis à l'essai
                                                          Le présent essai vise à déterminer les caractéristiques indoor use in building construction within the temperature        13.220.50     $145.00
CAN/ULC-S129-06
                           For Smoulder Resistance         range of -50 to 80 °C. The types of insulation materials which lend themselves to the evaluation using the                19.040
                           Of Insulation (Basket          method                                                                                                                    91.120.10
                           Method)                        described in this Standard are: A) Loose fill, designed for pouring application; B)Loose fill, designed for blowing
                                                          application with the aid of pneumatic equipment; C) Preformed products such as batts, roll boards and sheets;
                                                          and D) Spray applied products.

CAN/ULC-S129-06            Méthode normalisée d'essai     La présente norme s'applique à des isolants thermiques utilisés à l'intérieur dans la construction de bâtiments           13.220.50     $145.00
                           de la                          où la température se situe entre –50 et 80 °C. Les types de matériaux isolants qui se prêtent à l'évaluation               19.040
                           résistance à la combustion     au moyen de la méthode décrite dans la présente norme sont les suivants : A) à bourrage lâche pour                        91.120.10
                           lente des isolants (méthode    l'application manuelle; B) à bourrage lâche destiné au soufflage à l'aide d'un équipement pneumatique;
                           du panier)                     C) produits préformés comme des panneaux semi-rigides, des rouleaux et des feuilles; et D)
                                                          produits pulvérisés.

CAN/ULC-S130-M87(R1997)    Standard Method of Test        This Standard applies to cellulose fibre loose fill thermal insulation suitable for indoor use in building construction   13.220.50     $110.00
Amendment 1                for Ignition Resistance of     within the temperature range of -50 to 80°C.                                                                              91.120.10
                           Loose Fill Insulation
                           (Cigarette Method)
CAN/ULC-S130-M87 (R1997)   Méthode normalisée d’essai     La présente norme s'applique à l'isolant thermique cellulosique à bourragelâche utilisé à l'intérieur des bâtiments       13.220.50     $110.00
Modification 1             de résistance à l’allumage     à des températures comprises entre-50 et +80°C.1.2Tout isolant conforme à la présente norme, lorsque cela est             91.120.10
                           de l’isolant thermique         précisé par le fabricant, convient aux deux modes d'application (c'est-à-dire déversement à lamain au soufflage
                           cellulosique à bourrage        à l'aide d'un équipement spécial).
                           lâche (méthode de la
                           cigarette)



                                                                                                                                                                                                 Page 4 of 39
                                                                                  CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                         AND OTHER RECOGNIZED DOCUMENTS
                                                                                CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                        ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                        ABSTRACT                                                                                                             ICS CODE    PRICE (CDN)

CAN/ULC-S132-07         Standard For Emergency       These requirements cover emergency exit hardware, and emergency fire exit hardware that will actuate the             13.220.20     $175.00
                        Exit And Emergency Fire      latching                                                                                                             91.060.50
                        Exit Hardware                mechanism on a door to allow it to swing open when force is applied to the device.
CAN/ULC-S132-07         Méthode d'essai normalisée   Les présentes exigences visent les serrures antipaniques des issues de secours et les serrures antipaniques des      13.220.20     $175.00
                        des serrures antipaniques    portes coupe feu qui actionnent le mécanisme de verrouillage d'une porte pour lui permettre de s'ouvrir lorsqu'une   91.060.50
                        des issues de secours et     force est exercée sur le dispositif.
                        des portes coupe feu




                                                                                                                                                                                       Page 5 of 39
                                                                                       CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                              AND OTHER RECOGNIZED DOCUMENTS
                                                                                     CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                             ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.     TITLE                          ABSTRACT                                                                                                                ICS CODE    PRICE (CDN)

CAN/ULC-S133-07           Standard Method of Tests  The purpose of CAN/ULC-S133-07 is to establish requirements for door closers intended for use with swinging                   21.080       $130.00
                          for Door Closers Intended doors in                                                                                                                     91.060.50
                          for Use with Swinging     fire separations and on exit doors. This Standard does not cover door closers equipped with hold‑open features.
                          Doors                     The
                                                    door closers covered by this Standard are intended for installation in accordance with the Standard for Fire Doors
                                                    and
                                                    +C47 Windows, NFPA No. 80. The door closers covered by this Standard are intended for installation on interior
CAN/ULC-S133-07           Norme sur les ferme-porte La norme CAN/ULC-S133-07 vise à déterminer les exigences relatives aux ferme-porte conçus pour être utilisés                  21.080       $130.00
                          conçus pour être utilisés avec les                                                                                                                     91.060.50
                          avec des portes battantes portes battantes des séparations coupe-feu et des portes de sortie. La présente norme ne s'applique pas aux
                                                    ferme-
                                                    porte dotés de dispositifs de maintien en position ouverte. Les ferme-porte couverts par la présente norme sont
                                                    conçus
                                                    pour être installés conformément à la norme NFPA 80, Standard for Fire Doors and Windows. Les ferme-porte
                                                    couverts
CAN/ULC-S134-92(R1998)    Standard Method of Fire   This test method enables an assessment of installés sur des portes intérieures et pour être montés à wall
                                                    par la présente norme sont conçus pour êtrethe fire spread characteristics of non-load bearing exterior l'intérieur          13.220.50     $110.00
                          Test of Exterior Wall     assemblies. The test determines the comparative burning characteristics of exterior wall assemblies by                        19.040
                          Assemblies                evaluating fire spread over the exterior surface, heat flow from the fire plume to the exterior surface, and fire            91.060.10
                                                    spread within the test specimen.
CAN/ULC-S134-92(R1998)    Méthode normalisée des    Cette méthode d'essai permet d'évaluer les caractéristiques de propagation des flammes des murs extérieurs                   13.220.50     $110.00
                          essais de comportement au non porteurs. L'essai détermine aussi les caractéristiques de combustion comparatives des murs extérieurs                     19.040
                          feu des murs extérieurs   en évaluant les éléments suivants :                                                                                          91.060.10
                                                    A propagation des flammes sur la face extérieure;
                                                    B flux de chaleur de la colonne de flammes à la face extérieure;
                                                    C propagation des flammes dans le spécimen d'essai.


ULC-S135-04               Standard Test Method for       This test method determines combustibility parameters for the assessment of degree of combustibility of building        13.220.50     $180.00
Amendment 1               the Determination of           materials by measuring the heat release and smoke production from specimens exposed to radiant heat using                19.040
                          Combustibility Parameters      the test apparatus, specimen configurations and procedures described. This test method determines the amount
                          of Building Materials Using    of heat and smoke that may be contributed to a fire involving products made from the same material as that of
                          an Oxygen Consumption          the test specimen.
                          Calorimeter (Cone
                          Calorimeter)


CAN/ULC-S137-07           STANDARD METHOD OF             The purpose of this test method is to investigate the ability of mattresses to resist rapid heat release by measuring   13.220.40     $220.00
                          TEST FOR FIRE                  specific fire test responses when the mattress or mattress set is subjected to a specified flaming ignition source
                          GROWTH OF                      under well ventilated conditions. This test method is applicable only to the finished mattresses and mattress sets
                          MATTRESSES (OPEN               and does not apply to testing of individual component materials used, such as ticking and upholstery materials,
                          FLAME TEST)                    foams,
                                                         cotton battings, etc... This test method does not provide information on the performance of a mattress or mattress
                                                         set in other fire conditions or the contribution of the mattress to a developing fire condition.


CAN/ULC-S137-07           MÉTHODE D'ESSAI                                                                                                                                        13.220.40     $220.00
                          NORMALISÉE POUR LA             La présente méthode d'essai vise à étudier la capacité d'un matelas à résister à un dégagement rapide de chaleur
                          PROPAGATION DU FEU             en mesurant les réactions spécifiques à l'essai de résistance au feu lorsqu'il est soumis à une
                          SUR LES MATELAS                source d'inflammation prescrite dans des conditions de bonne aération. La présente méthode d'essai s'applique
                          (ESSAI À LA FLAMME             seulement à des matelas ou ensembles de matelas finis, mais ne convient pas aux essais sur des
                          NUE)                           matériaux de composants distincts, comme les housses à matelas, le rembourrage, les mousses, les ouates de
                                                         coton, etc. La présente méthode d'essai ne fournit pas de renseignements sur la performance d'un matelas ou
                                                         d'un ensemble de matelas dans des conditions de feu différentes ou quant à sa contribution à propager un feu.

CAN/ULC-S138-06           Standard Method of Test        This is a fire test response Standard that describes the test method used to determine the contribution to fire         13.220.50     $205.00
                          for Fire Growth of Insulated   growth provided by a non-loadbearing insulated building panel installed in a sprinklered or unsprinklered room           19.020
                          Building Panels in a Full-     configuration. The insulated building panels investigated by this test method are of the factory-assembled type         91.060.10
                          Scale Room Configuration       and intended for use as exterior or interior walls, ceilings or roofs. This Standard presumes that these panels
                                                         are not backed by other materials or constructions in typical installation practice. This test method measures
                                                         the time to flashover under specified test conditions. Provisions are made to measure ignitability, smoke
                                                         obscuration, rate of fire growth and rate of heat release of the test panels. This test method is not intended to
                                                         determine the fire resistance rating of insulated building panels. In addition, this test method does not investigate
                                                         the toxic hazard posed by the products of combustion.

CAN/ULC-S138-06           Méthode d'essai normalisée     Il s'agit d'une norme d'essai de résistance au feu. Le présent document décrit la méthode d'essai utilisée              13.220.50     $205.00
                          de la propagation du feu        pour déterminer la contribution du panneau de construction isolé non porteur à la propagation du feu                    19.020
                          dans les panneaux de            dans une configuration de pièce protégée ou non par un système de gicleurs. 1.2 Les panneaux de                        91.060.10
                          construction isolés d'une       construction isolés faisant l'objet de cette méthode d'essai ont été fabriqués en usine et sont destinés à
                          configuration de pièces à       être utilisés pour la fabrication de murs extérieurs et intérieurs, de plafonds et de toits. Cette norme
                          l'échelle réelle                suppose qu'aucun contreparement fabriqué d'autres matériaux n'est posé sur les panneaux en question
                                                          dans une situation d'installation type. 1.3 La présente méthode d'essai mesure le temps requis, dans des
                                                          conditions précises, pour produire un embrasement général. Les dispositions nécessaires sont prises afin
                                                          de mesurer l'inflammabilité, l'obscurcissement dû aux fumées, la vitesse de propagation du feu et le taux de
                                                          chaleur émise des panneaux d'essai. 1.4 La présente méthode d'essai n'a pas été conçue afin de
                                                          déterminer la résistance au feu des panneaux de construction isolés. De plus, cette méthode d'essai
                                                          n'examine pas les risques de toxicité que présentent les produits de la combustion.


ULC-S139-00               Standard Method of Fire        The intent of this fire test method is to determine the integrity of electrical cables which are evaluated for their    13.220.50     $110.00
                          Test for Evaluation of         ability to maintain circuit integrity at a specified voltage potential relative to ground and other conductors.         29.060.20
                          Integrity of Electrical Cables Leakage current per unit length of cable shall also be quantified.

CAN/ULC-S301-M88          Standard For Central And       This Standard covers requirements applicable to Central Station Facilities and Protection Service, Monitoring            13.310       $130.00
Amendments 1-4            Monitoring Station Burglar     Station Facilities and Protection Service, Satellite Centres, Signal Processing Centres, and Bridging Centres.           13.320
                          Alarm Systems                  This Standard does not include requirements for hold‑up alarm systems or panic alarm devices.

CAN/ULC-S301-M88          Norme systèmes d'alarme        La présente norme renferme les exigences relatives au service deprotection et aux installations des postes               13.310       $130.00
Modifications 1-4         antivol des postes centraux    centraux, au service de protectionet aux installations des postes de surveillance et aux postes satellites.              13.320
                          et des postes                  Quel que soit le type de service de protection établi conformément à laprésente norme, les dispositifs qui
                          desurveillance                 protègent les propriétés individuelles sont également classés selon le degré de protection assuré à chaque
                                                         emplacement.Les exigences concernant l'installation et la classification du degré de protection du matériel
                                                         des systèmes d'alarme installés dans des locaux individuels sont publiées dans la norme ULC-S302-1974
                                                         intitulée «Installationet classification des systèmes d'alarme antivol des banques et desétablissements
                                                         commerciaux» qui devrait être consultée par les installateurs de dispositifs d'alarme antivol.

CAN/ULC-S302-M91(R1999)   Standard for Installation      These requirements apply to the installation of protective wiring and devices connected to burglar alarm systems         13.310       $130.00
Amendments 1-3            and Classification of          on financial and commercial premises, safes and vaults. These requirements also include the classification of            13.320
                          Burglar Alarm Systems for      extent of protection installed at individual locations.                                                                 91.040.20
                          Financial and Commercial
                          Premises, Safes And
                          Vaults




                                                                                                                                                                                              Page 6 of 39
                                                                                        CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                               AND OTHER RECOGNIZED DOCUMENTS
                                                                                      CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                              ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.      TITLE                          ABSTRACT                                                                                                               ICS CODE    PRICE (CDN)

CAN/ULC-S302-M91(R1999)    Norme installation et           Les présentes exigences visent l'installation du câblage et dispositifs deprotection raccordés aux systèmes            13.310        $130.00
Modifications 1-3          classification des systèmes    d'alarme antivol de banques, d'établissementcommerciaux, de coffre-forts et de chambres fortes. Les                     13.320
                           d'alarme antivol des           présentes exigences renferment également les règles de classification du degré de protection à desendroits             91.040.20
                           banques,établissements         particuliers. Les systèmes d'alarme antivol sont classés suivant leur principe defonctionnement : poste central,
                           commerciaux, coffre-forts      poste de surveillance ou système local. Il seclassent également selon la catégorie particulière de propriété
                           et chambres fortes             qu'ils sontdestinés à protéger, c'est-à-dire des établissements commerciaux, coffres-forts ou chambres fortes
                                                          et des coffres-forts ou chambres fortes d'établissements financiers.


CAN/ULC-S303-M91(R1999)    Standard for Local Burglar     These requirements cover design and construction, performance, and maintenance of local burglar alarm units             13.310        $130.00
                           Alarm Units and Systems        and systems for use in mercantile premises, mercantile safes and vaults, and bank safes and vaults.                     13.320
                                                                                                                                                                                  97.180
CAN/ULC-S303-M91 (R1999)   Norme dispositifs et            Les présente exigences visent la conception, la construction, le rendementet l'entretien des dispositifs et des        13.310        $130.00
                           systèmes d'alarme antivol      systèmes d'alarme antivol locaux destinésà être utilisés dans les établissements commerciaux, les coffres-forts         13.320
                           locaux                         et leschambres fortes des établissements commerciaux et des banques.                                                    97.180


CAN/ULC-S304-06            Signal Receiving Centre   This Standard covers construction and performance requirements for signal receiving centre burglar alarm control             13.310        $200.00
                           And Premise Burglar Alarm units, including signal receiving, recording and supervisory control units intended for permanent use within a               13.320
                           Control Units             signal receiving centre. It also covers associated burglar alarm control units to be installed within mercantile             97.180
                                                     and banking premises and on safes and vaults for protection against burglary.

                                                          These requirements also serve as the basis of classification of signal receiving centre burglar alarm control units.
                                                          Requirements covering complete control units are contained in CAN/ULC S301, Standard for Central and
                                                          Monitoring Station Burglar Alarm Systems.

CAN/ULC-S304-06            Postes de contrôle d'alarme    La présente norme porte sur les exigences de construction et de rendement des postes de contrôle d'alarme               13.310        $200.00
                           antivol de la centrale de      antivol à la centrale de réception d'alarme, comprenant les dispositifs de réception des signaux, les dispositifs       13.320
                           réception d'alarme et du       enregistreurs et les postes de surveillance destinés à être utilisés en permanence dans une centrale de réception       97.180
                           local                          d'alarme. La présente norme s'applique également aux dispositifs d'alarme antivol connexes destinés à être
                                                          utilisés dans les établissements commerciaux, et les banques, les coffres forts et les chambres fortes contre les
                                                          vols.

                                                          De plus, les présentes exigences permettent de classer les postes de contrôle d'alarme antivol des centrales de
                                                          réception d'alarme. La norme CAN/ULC S301, Dispositifs d'alarme antivol des postes centraux et des postes de
                                                          surveillance, renferme les exigences visant les systèmes de surveillance entiers.
ULC-306-03                 Intrusion Detection Units      These requirements cover intrusion-detection units for burglary protection signalling systems to be employed in         13.310        $130.00
                                                          outdoor or ordinary indoor (nonhazardous) locations to automatically indicate the presence of an intruder by            97.180
                                                          actuating electrical control circuits.


CAN/ULC-S310-M91 (R1999)   Installation and              These requirements apply to the installation of alarm protection products and devices connected to form a                13.310        $130.00
                           Classification of Residential residential burglar alarm system. These requirements include the criteria for classifying the level of protection
                           Burglar Alam Systems          at an individual residence.

CAN/ULC-S310-M91 (R1999)   Norme installation et        Les présentes exigences s'appliquent à l'installation de produits et dedispositifs d'alarme de protection raccordés       13.310        $130.00
                           classification des sytèmes pour constituer un systèmed'alarme résidentiel contre le cambriolage. Les présentes exigences comportent les
                           d’alarme résidentiels contre critères de classification du niveau deprotection par rapport à une résidence donnée. Voir l'annexe A.
                           le cambriolage

ULC-S317-96                Standard for Installation      These requirements apply to the installation of equipment and wiring of closed circuit surveillance cameras and        33.160.40      $110.00
                           and Classification of Closed   associated video equipment.                                                                                             13.310
                           Circuit Video Equipment
                           (CCVE) Systems for
                           Institutional and
                           Commercial Security
                           Applications
ULC-S318-96                Standard for Power             These requirements cover power supplies for use as components in burglar alarm systems.                                 13.310        $110.00
                           Supplies for Burglar Alarm                                                                                                                            29.260.01
                           Systems
CAN/ULC-S319-05            Electronic Access Control      An electronic access control system is a system designed to grant to authorized persons entry to and/or exit from        13.31         $210
                           Systems                        a controlled area and deny such entry and/or exit to non-authorized individuals by electrical, electronic or
                                                          mechanical means. The extent of control of entry/exit may include the reporting and recording of related activity.                   $245 after
                                                                                                                                                                                              Nov. 1, 2005
                                                          This standard defines the minimum requirements as they apply to the construction, performance and operation of
                                                          such systems and/or accessory equipment as well as recommended characteristics to meet four levels of
                                                          protection with Level I (lowest level-Class I equipment) to Level IV (highest-Class IV equipment). The various
                                                          means of communication between the reader, the reader interface module, the access point actuator, the access
                                                          point sensor, the access control unit and the monitoring console are described within the scope of this standard.


CAN/ULC-S319-05            Systèmes électroniques de Un système de contrôle d’accès est un système comportant divers composants électriques, électroniques ou                      13.31         $210
                           contrôle d’accès          mécaniques conçus pour permettre aux personnes autorisées et interdire aux personnes non autorisées d’entrer
                                                     dans une zone protégée ou d’en sortir. Le contrôle des entrées et des sorties peut englober le signalement et la                            $245
                                                     consignation des activités connexes.                                                                                                     Après le 1er
                                                                                                                                                                                             novembre 2005
                                                          La présente norme énonce les exigences minimales auxquelles doivent satisfaire ces systèmes et l’équipement
                                                          auxiliaire sur le plan de la construction, de la performance et du fonctionnement ainsi que les caractéristiques
                                                          qu’ils doivent posséder pour être en mesure d’assurer le niveau de protection voulu en allant du niveau I (le plus
                                                          faible - Équipement de classe I) au niveau IV (le plus élevé - Équipement de classe IV). La norme décrit aussi les
                                                          divers moyens de communication entre le lecteur, le module d’interface de lecteur, l’actionneur de point d’accès,
                                                          le capteur de point d’accès, l’unité de contrôle d’accès et la console de surveillance.


CAN/ULC-S321-M91           Standard for Burglary          These requirements cover vault doors and vault modular panels (for use in the construction of vault floors, walls       13.310        $110.00
Amendments 1-2             Resistant Vault Doors and      and ceilings), of the type intended for use in financial institutions, commercial, industrial and mercantile           91.060.50
                           Modular Panels                 properties, and the like, and that are relied upon to protect the contents of enclosed spaces from burglary
                                                          attack. Requirements for fire resistant rating of vaults and vault doors are outside the scope of this Standard
                                                          and should be determined in accordance with Chapter 2 of the Supplement to the National Building Code of
                                                          Canada or in accordance with ULC/ORD-C72A, Fire Resistance of Prefabricated Structure Supported Vaults.

                                                          These requirements are intended to establish the burglary resistant rating of vault doors and modular panels
                                                          according to the length of time they withstand attack by common mechanical tools, electrical tools, cutting
                                                          torches, or any combination of these means in the hands of experienced operators. These requirements
                                                          do not cover attacks with the burning bar (thermal lance) or explosives.




                                                                                                                                                                                               Page 7 of 39
                                                                                     CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                            AND OTHER RECOGNIZED DOCUMENTS
                                                                                   CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                           ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.     TITLE                         ABSTRACT                                                                                                           ICS CODE    PRICE (CDN)

CAN/ULC-S321-M91          Portes et panneaux             Les présentes exigences couvrent les portes et les panneaux modulaires deschambres fortes (utilisés pour la        13.310       $110.00
Amendment 1               modulaires antivol des        construction des planchers, des murs et desplafonds des chambres fortes) des établissements à vocation             91.060.50
                          chambres fortes               financière,commerciale et industrielle, ou à vocation similaire, et sur lesquelles on sefie pour la protection
                                                        contre le cambriolage des biens qu'elles contiennent. NOTE : Les exigences relatives au niveau de résistance
                                                        au feu ne font pas l'objet de la présente norme et doivent être déterminées comme le prescrivent le chapitre 2
                                                        du Supplément du Code national du bâtiment du Canada ou la norme ULC/ORD-C72A Fire Resistance of
                                                        Prefabricated Stricture Supported Vaults. Les présentes exigences ont pour but d'établir le niveau de
                                                         résistance aucambriolage des portes et des panneaux modulaires des chambres fortes enfonction du temps
                                                        durant lequel ils résistent lors d'un essai d'intrusion àl'aide d'outils mécaniques usuels, d'outils électriques
                                                        usuels, de chalumeauxd'oxycoupage ou de toute combinaison de ceux-ci lorsqu'ils sont utilisés pardes
                                                        experts pour ce type d'essais. Le niveau de résistance est fonction de ladurée nette de travail qui est
                                                        nécessaire pour réussir une intrusion et il estétabli comme suit : ClasseC1-30 Protection minimale de
                                                        30 minutesC2-60 Protection minimale de 60 minutesC2-90 Protection minimale de 90 minutesC3-120
                                                        Protection minimale de 2 heures1.3 Les présentes exigences ne couvrent pas les tentatives d'intrusion
                                                        faites avec une lance à oxygène (lance thermique) ou avec des explosifs.


CAN/ULC-S322-92 (R1998)   Vault Ventilators and Vault   These requirements cover emergency vault ventilators and vault-ventilating ports. Products covered by these         13.040       $110.00
                          Ventilatating                 requirements are intended for installation in vaults that are used for the storage of valuables, and that are       13.310
                                                        protected by special security measures that cannot be forced using normal rescue equipment, but require             23.120
                                                        waiting for a time lock or similar device to release entrapped individuals.

ULC-S324-93               Burglary Resistant Safes      These requirements cover burglary-resistant safes classified as follows: A. Tested on Six Sides: (i) Residential    13.310       $110.00
Amendment 1                                             Safe; (ii) Tool Resistant Safe - Class TL-15X6; (iii) Tool Resistant Safe - Class TL-30X6; (iv) Torch and Tool
                                                        Resistant Safe - Class TRTL-15X6; (v) Torch and Tool Resistant Safe - Class TRTL-30X6; and (vi) Torch and
                                                        Tool Resistant Safe - Class TRTL-60X6.B. Tested on Side Containing the Door; (i) Tool Resistant Safe - Class
                                                        TL-15; (ii) Tool Resistant Safe - Class TL-30; (iii) Torch and Tool Resistant Safe - Class TRTL-15; and (iv)
                                                        Torch and Tool Resistant Safe - Class TRTL-30.


ULC-S327-98               Burglar Resistant             These requirements cover combination locks designed for attachment on doors of safes, chests, vaults, and the       91.190       $115.00
                          Combination Locks             like, to provide a means of locking the boltwork against unauthorized opening. These requirements are intended      13.310
                                                        to test the ability of combination locks to resist unauthorized opening of the lock by manipulation methods
                                                        such as sense or sight, touch, hearing or manipulation by electro-mechanical devices.


ULC-S328-98               Burglary Resistant Key        These requirements cover mechanical key locks categorized as follows: a cabinet locking cylinder; door locks;       91.190       $115.00
                          Locks                         locking cylinders; security container key locks utilizing Type 1 and Type 2 locks; and two-key locks.               13.310

CAN/ULC-S329-1992         Standard For Automated        These requirements cover the construction and security performance of equipment intended to automatically          35.240.40     $110.00
Amendments 1-2            Banking Machines              dispense currency when operated as intended by a customer, and to provide protection against unauthorized
                                                        removal of currency.


ULC-S330-93               Burglary-Resistant Night      These requirements cover the construction and security performance of equipment intended to permit the              13.310       $110.00
                          Depositories                  deposit of cash, cheques, etc., into a security container, and to provide protection against unauthorized
                                                        removal of deposits. These requirements cover (1) products intended for permanent connection to 600V
                                                        or lower potential branch circuits, and (2) products intended for cord connection to 300 V or lower potential
                                                        branch circuits.
ULC-S332-1993(R1998)      Standard For Burglary         These requirements cover clear or translucent glazing material intended for indoor use, outdoor use, or             13.310       $110.00
                          Resistant Glazing Material    indoor/outdoor use as a substitute for, or in combination with plate glass show window panels intended
                                                        to resist burglarious attacks of the hit-and-run type.

ULC-S333-93               Currency Dispensing Units These requirements cover the construction and security performance of equipment intended to automatically               03.060       $110.00
                                                    dispense currency within a financial institution when operated as intended by an authorized person, and to              13.310
                                                    provide protection against unauthorized removal of currency.

ULC-S334-98               Burglary Resistant            These requirements cover burglary resistant electronic combination locks designed for attachment on doors           91.190       $110.00
                          Electronic Combination        of safes, chests, vaults, automated bankingmachines, depository units, and the like, to provide a means of          13.310
                          Locks                         locking the boltwork against unauthorized opening.These requirements are intended to test the ability of
                                                        burglary resistant electronic combination locks to resist unauthorized opening for a limited period of time.
                                                        Electronic combination locks covered by these requirements may or may not have integral protection against
                                                        entry by force.These requirements cover burglary resistant electronic combination locks powered by electrical
                                                        circuits, or they generate their own power as a function of their operation. A power supply that is used to
                                                        energize a burglary resistant electronic combination lock shall comply with the requirements of the Standard
                                                        for Power Supplies for Burglar Alarm Systems, ULC-S318. If a burglary resistant electronic combination lock
                                                        has a timelock feature, it shall comply with ULC-ORD-C887, Timelocks. If a burglary resistant electronic
                                                        combination lock has a time delay feature in any user mode, it shall comply with ULC-S337, Standard for
                                                        Delayed-Action Timelocks.The requirements of this Standard do not apply to components and systems
                                                        external to the burglary resistant electronic combination lock which are required for the administration and
                                                        operation of the locking system.


ULC-S337-98               Delayed-Action Timelocks      These requirements cover delayed-action timelocks intended for attachment on the doors of chests, and the like,     91.190       $115.00
                                                        to provide a means for delaying unlocking for a predetermined length of time as protection against robbery.

CAN/ULC-S338-98           Automobile Theft Deterrent These requirements cover electrical or electronic immobilization systems which are installed on passenger cars         13.310       $130.00
                          Equipment and Systems:     and light duty trucks with 12 v electrical systems. Both OEM systems and non-OEM systems shall meet the               43.040.99
                          Electronic Immobilization  requirements of this Standard.

CAN/ULC-S338-98           Norme sur les systèmes et     Ces exigences s'appliquent aux systèmes d'immobilisation électroniques ouélectriques qui sont installés dans        13.310       $130.00
                          les appareillages de          les voitures de tourisme et les utilitaireslégers à système électrique de 12 V. Les systèmes OEM                   43.040.99
                          prévention du vol de          (Original Equipment Manufacturer - équipement d'originedu fabricant) et les systèmes non-OEM doivent
                          véhicules automobiles         satisfaire à cette norme.

CAN/ULC-S503-05           Standard for Carbon-          This is the common UL and ULC Standard for Carbon-Dioxide Fire Extinguishers. It is the Fourth edition of          13.220.10     $160.00
Amendment 1               Dioxide Fire Exinguishers     CAN/ULC-S503, and the Ninth edition of ANSI/UL 154. These requirements cover the construction and
                                                        performance, exclusive of performance during fire tests, of portable carbon-dioxide fire extinguishers. Carbon-
                                                        dioxide fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire
                                                        Extinguishers, NFPA 10 and the National Fire Code of Canada. The requirements for performance during
                                                        fire testing of carbon-dioxide fire extinguishers are specified in the Binational Standard for Rating and Fire
                                                        Testing of Fire Extinguishers, ANSI/UL 711/CAN/ULC-S508.

CAN/ULC-S503-05           Norme sur les extincteurs     Ce document constitue la norme harmonisée UL et ULC, Extincteurs au dioxyde de carbone. Il s’agit de la            13.220.10     $160.00
Modification 1            au dioxyde de carbone         quatrième édition de la norme CAN/ULC-S503, et de la neuvième édition de la norme ANSI/UL 154. Ces
                                                        exigences visent la construction et le fonctionnement des extincteurs portatifs au dioxyde de carbone.
                                                        Elles ne visent toutefois pas le fonctionnement au cours des essais de réaction au feu. Les extincteurs au
                                                        dioxyde de carbone sont destinés à être utilisés conformément à la norme NFPA 10, Standard for Portable
                                                        Fire Extinguishers, et au Code national de prévention des incendies du Canada. Les exigences relatives au
                                                        fonctionnement des extincteurs au dioxyde de carbone au cours des essais de réaction au feu sont
                                                        spécifiées dans la norme binationale relative à la classification et essais sur foyers types des extincteurs,
                                                        ANSI/UL 711/CAN/ULC-S508.




                                                                                                                                                                                        Page 8 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

CAN/ULC-S504-02         Dry Chemical Fire              Covers the construction and performance, exclusive of performance during fire tests, of portable dry chemical         13.220.10     $160.00
Amendment 1             Extinguishers                  and dry powder (Class D) fire extinguishers.

CAN/ULC-S504-02         Extincteurs à poudres          Visent la construction et le fonctionnement des extincteurs portatifs à poudre chimique de classe D. Elles ne         13.220.10     $160.00
Modification 1          chimiques                      visent toutefois pas le fonctionnement au cours des essais de réaction au feu.

ULC-S505-1974           Fusible Links for Fire         These requirements cover fusible links used for fire-protection service. Fusible links are classified by                 NA         $110.00
                        Protection Services            temperature rating, type of coating or plating, minimum and maximum design load, and other factors
                                                       which may have a bearing on their intended use. .
CAN/ULC-S507-05         Standard for Water Fire        This is the common UL and ULC Standard for Water Fire Extinguishers. It is the Fourth edition of CAN/ULC-             13.220.10     $160.00
Amendment 1             Extinguishers                  S507, and the Eighth edition of ANSI/UL 626. These requirements cover the construction and performance,
                                                       exclusive of performance during fire tests, of water fire extinguishers. Water fire extinguishers are intended
                                                       to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10, and the National
                                                       Fire Code of Canada. These requirements cover stored-pressure, water fire extinguishers that use a single
                                                       chamber for both the extinguishing agent and the expellant gas. The extinguishers covered by these
                                                       requirements may be charged with plain water, an antifreeze or a loaded-stream solution. The requirements
                                                       for performance during fire testing of stored-pressure water fire extinguishers are specified in the Binational
                                                       Standard for Rating and Fire Testing of Fire Extinguishers, ANSI/UL 711/CAN/ULC-S508.




CAN/ULC-S507-05         Norme sur les extincteurs à Ce document constitue la norme harmonisée UL et ULC, Extincteurs à eau. Il s’agit de la quatrième édition de la          13.220.10     $160.00
Modification 1          eau                         norme CAN/ULC-S507, et de la huitième édition de la norme ANSI/UL 626. Ces exigences visent la
                                                    construction et le fonctionnement des extincteurs à eau. Elles ne visent toutefois pas le fonctionnement au
                                                    cours des essais de réaction au feu. Les extincteurs à eau sont destinés à être utilisés conformément à la
                                                    norme NFPA 10, Standard for Portable Fire Extinguishers, et au Code national de prévention des incendies
                                                    du Canada. Ces exigences couvrent les extincteurs à eau à pression permanente dont l'agent extincteur et
                                                    le gaz propulseur se trouvent dans le même réservoir. Les extincteurs couverts par ces exigences peuvent
                                                    être chargés d'eau ordinaire, d'antigel ou d'une solution de métal alcalin. Les exigences relatives au
                                                    fonctionnement des extincteurs à eau à pression permanente au cours des essais de réaction au feu sont
                                                    spécifiées dans la norme binationale relative à la classification et essais sur foyers types des extincteurs,
                                                    ANSI/UL 711/CAN/ULC-S508.


CAN/ULC-S508-02         Standard for the Rating and These requirements cover rating, and performance during fire tests, of fire extinguishers intended for use in            13.220.10     $160.00
Amendment 2             Fire Testing of Fire        attacking Class A, B, C, D, and K fires as defined herein. These requirements also cover performance during fire          19.040
                        Extinguishers               tests of fire extinguishing agents for application on Class D fires. The ultimate rating of an extinguisher or the
                                                    prescribed use of an extinguisher or fire extinguishing agent is based on its fire-extinguishing potential as
                                                    determined by fire tests and presupposes installation and use in accordance in the United States with the
                                                    Standard for Portable Fire Extinguishers, NFPA 10, and with the National Fire Code of Canada.

                                                       Fire extinguishers, fire extinguishing agents, or both shall also comply with the requirements for construction and
                                                       performance as applicable to specific types, designs, sizes, and arrangements. Suchadditional requirements are
                                                       not within the scope of these requirements.


CAN/ULC-S508-02         Classification et essai sur  Cette norme vise la classification et l’efficacité au cours des essais sur foyers-types des extincteurs destinés        13.220.10     $160.00
Modification 2          foyers types des extincteurs à être utilisés pour combattre les feux de classes A, B, C, D et K définis ci-dessous. Elle vise également               19.040
                                                     l’efficacité au cours des essais sur foyers-types des agents extincteurs destinés à être utilisés pour combattre
                                                     les feux de classe D. La classification définitive d’un extincteur ou les conditions d’utilisation d’un extincteur
                                                     ou d’un agent extincteur sont basées sur leur pouvoir d’extinction déterminé au cours des essais et l’hypothèse
                                                     qu’ils ont été installés et qu’ils sont utilisés conformément à la norme NFPA 10 Standard for Portable Fire
                                                     Extinguishers aux États-Unis, et au Code national de prévention des incendies du Canada au Canada.
                                                     Les extincteurs et (ou) les agents extincteurs doivent également satisfaire aux exigences de construction et
                                                     d’efficacité pertinentes, établies en fonction du type, de la conception, des dimensions et des agencements
                                                     particuliers. Toutefois, ces exigences supplémentaires ne sont pas traitées dans cette norme.



CAN/ULC-S511-07         Standard for Lined Fire        These requirements apply to single and multiple-jacketed lined fire hose of the following nominal inside diameter     13.220.10     $140.00
                        Hose for Interior              trade sizes: 38, 45, 50, 65, 75, 89, 100, 125, and 150 mm. These requirements do not cover couplings nor their        23.040.70
                        Standpipes and Municipal       method of attachment.
                        and Industrial Fire-
                        Protection Services
CAN/ULC-S511-07         Norme sur le tuyau             Les présentes exigences s'appliquent aux tuyaux d'incendie entoilés à gaine simple et à gaines multiples dont les     13.220.10     $140.00
                        d'incendie entoilé pour        diamètres intérieurs nominaux commerciaux sont les suivants : 38, 45, 50, 65, 75, 89, 100, 125 et 150 mm. Les         23.040.70
                        conduites d'incendie           exigences ne portent pas sur les raccords ni sur leur méthode de fixation.
                        intérieurs et services
                        municipaux et industriels de
                        protection incendie




                                                                                                                                                                                          Page 9 of 39
                                                                                   CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                          AND OTHER RECOGNIZED DOCUMENTS
                                                                                 CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                         ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                        ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

CAN/ULC-S512-M87        Standard for Halogenated     Covers the construction and operation of halogenated agent hand-portable and wheeled type fire extinguishers.         13.220.10     $110.00
Amendments 1-6          Agent Hand and Wheeled
                        Fire Extinguishers
CAN/ULC-S512-M87        Norme relative aux           Porte sur la construction et le fonctionnement des extincteursà produits halogénés, à main et sur roues.              13.220.10     $110.00
Modifications 1-6       extincteurs à produits
                        halogénés, à main et sur
                        roues
ULC-S513-1978           Standard For Threaded        This Standard covers threaded couplings for 1½‑ and 2½‑inch fire hose for use in fire protection service.             13.220.30     $110.00
                        Couplings For 1½- And 2½-                                                                                                                          23.040.60
                        Inch Fire Hose
CAN/ULC-S514-07         Dry Chemical for Use in      These requirements cover chemical, physical and performance properties of dry chemical fire extinguishing             13.220.10     $145.00
                        Hand and Wheeled Fire        agents
                        Extinguishers                for use in portable fire extinguishing equipment being evaluated to CAN/ULC-S504M, Standard for Dry Chemical
                                                     and Dry Powder Hand and Wheeled Fire Extinguishers.These requirements are also intended for the evaluation of
                                                     recharge dry chemical fire extinguishing agents for use in extinguishers meeting the requirements of CAN/ULC-
                                                     S504M, provided the performance of the combination of the extinguisher and recharge agent, including
                                                     performance during fire tests, can be shown to be equivalent to that of the original extinguisher.


CAN/ULC-S514-07         Norme sur les poudres        Les présentes exigences visent les propriétés chimiques, physiques et de rendement des agents extincteurs à           13.220.10     $145.00
                        chimiques utilisées dans     poudres chimiques destinés aux extincteurs portatifs qui sont évalués conformément à la norme CAN/ULC‑S504,
                        les extincteurs, à main et   Norme sur les extincteurs à poudres chimiques. Ces exigences visent également l'évaluation de la recharge des
                        sur roues                    agents extincteurs à poudres chimiques destinés aux extincteurs, conformément aux exigences de la norme
                                                     CAN/ULC‑S504, à condition que le rendement de la combinaison de l'extincteur et de la recharge de l'agent
                                                     extincteur, y compris pendant les essais de comportement au feu, soit équivalent à celui de l'extincteur original.



CAN/ULC-S515-04         Automobile Fire Fighting     This Standard defines the minimum performance requirements for new automobile fire fighting apparatus such as         13.220.10     $205.00
                        Apparatus                    pumpers, water tank trucks, ladder trucks, aerial devices and combinations of these, as used for structural fire
                                                     fighting in the municipal fire service. This Standard defines the minimum requirements for the common types of
                                                     fire fighting apparatus and the requirements for each of the components provided therein. This Standard does not
                                                     cover optional equipment typically carried by the various types of fire fighting apparatus and the variety of
                                                     combinations and functions of this equipment.


CAN/ULC-S515-04         Engins automobiles de lutte La présente norme définit les exigences de rendement minimales relatives aux nouveaux engins automobiles de            13.220.10     $205.00
                        contre l'incendie           lutte contre l'incendie, notamment les autopompes, les camions-citernes à eau, les autos-échelles, les dispositifs
                                                    aériens et des combinaisons de ces derniers, qui sont utilisés dans la lutte contre l'incendie structural au service
                                                    d'incendie municipal. La présente norme définit les exigences minimales pour les types courant d'engins de
                                                    lutte contre l'incendie et les exigences pour chacune des composantes prévues dans la norme. La présente
                                                    norme ne porte pas sur le matériel facultatif que transportent en général les divers types d'engins de lutte contre
                                                    l'incendie et la variété de combinaisons et de fonctions du matériel en question.




CAN/ULC-S518-M90        Standard for Non-            This Standard applies to woven-jacketed, lined, non-percolating hose of the sizes commercially known as 25 mm         13.220.20     $110.00
                        Percolating Forestry Hose    and 38 mm, suitable for use in fighting forest fires.                                                                 23.040.70
                                                                                                                                                                           65.060.80
ULC-S518.1-95           Standard for Synthetic Non- This Standard applies to 25 and 38 mm synthetic non-percolating type hoses having a minimum service test               13.220.20     $115.00
Amendments 1-2          Percolating Forestry Hose pressure of 2070 kPa suitable for use in fighting forest fires. These hoses are classified as follows: Class A           65.060.80
                                                    (woven-jacketed synthetic fibre with an integral lining) and Class B (rubber-covered jacket and rubber-lined).

CAN/ULC-S519-M90        Standard for Percolating     This Standard applies to percolating forestry hose of the size commercially known as 38 mm, suitable for use in       13.220.20     $110.00
                        Forestry Hose                fighting forest fires.                                                                                                23.040.70
                                                                                                                                                                           65.060.80
ULC-S519.1-95           Standard for Synthetic       This Standard applies to 25 and 38 mm synthetic percolating type hoses having a minimum service test pressure         13.220.20     $115.00
Amendments 1-2          Percolating Forestry Hose    of 2070 kPa suitable for use in fighting forest fires.                                                                65.060.80




                                                                                                                                                                                        Page 10 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                               ICS CODE    PRICE (CDN)

CAN/ULC-S520-07         Standard for Fire Hydrants     This Standard covers barrel-type hydrants with compression shut-off and slide gate shut-off, for general water         13.220.10     $140.00
                                                       works service. This Standard does not cover wet barrel type hydrants. References to the setting and drainage
                                                       of hydrants are not included in this Standard.


CAN/ULC-S520-07         Poteaux d'incendie             La présente norme définit les poteaux d'incendie de type à baril avec fermeture à compression et à guillotine ,        13.220.10     $140.00
                                                       pour
                                                       le service général d'alimentation d'eau. La présente norme ne définit pas les poteaux d'incendie de type à baril
                                                       mouillé. Des informations sur le réglage et la vidange des poteaux d'incendie ne sont pas incluses dans la
                                                       présente
                                                       norme.
CAN/ULC-S522-07         Standard for Fire              Covers hose in sizes of l0 mm up to and including a nominal internal diameter of 32 mm for use on portable and         13.220.10     $145.00
                        Extinguishers and Booster      wheeled fire extinguishers, hand hose line fixed extinguishing systems, and also as booster hose on fire
                        Hose                           apparatus.

CAN/ULC-S522-07         Norme relative aux tuyaux      S'applique aux tuyaux de diamètre intérieur nominal de 10 à 32 mminclusivement, utilisés avec les extincteurs          13.220.10     $145.00
                        d’extincteur et de dévidoir    portatifs et surroues, les systèmes d'extinction fixes à robinet armé et aussiavec les dévidoirs tournants du
                        tournant                       matériel de lutte contre les incendies.

CAN/ULC-S523-M91        Standard for Light Attack      This Standard is intended to cover essential requirements for ensuring satisfactory performance of light attack        13.220.30     $110.00
Amendments 1-2          Fire Fighting Apparatus        apparatus for fire-fighting service. The type of apparatus covered by this Standard is intended to supplement           43.160
                        (Mini‑Pumper)                  the standard apparatus normally used by public fire departments.

CAN/ULC-S523-M91        Autopompes de premiere         La présente norme a pour but de fournir les exigences essentielles pours'assurer que les performances des mini-        13.220.30     $110.00
Modifications 1-2       intervention de lutte contre   autopompes des services de lutte contrel'incendie sont satisfaites. La mini-autopompe couverte par la présente          43.160
                        l'incendie (mini-              norme est destinée à être uncomplément à l'autopompe standard normalement utilisée par les services publics
                        autopompes)                    de lutte contre l'incendie.



CAN/ULC-S524-06         Installation of Fire Alarm     This Standard describes the requirements for the design and installation of a fire alarm system with or without        13.220.20     $220.00
                        Systems                        voice communication capability.                                                                                         13.320
CAN/ULC-S524-06         Installation des réseaux       Cette norme énonce les exigences relatives à la conception et à l'installation d'un réseau avertisseur d'incendie      13.220.20     $220.00
                        avertisseurs d'incendie        doté ou non d'un réseau de communication phonique.                                                                      13.320
CAN-ULC-S525-07-EN      Audible Signal Devices for     These requirements cover electrically operated bells, sirens, horns, and similar audible signal devices, rated at      13.220.20     $150.00
                        Fire Alarm Systems,            300 V or less, for fire-protective signalling service and intended for indoor and/or outdoor installation in            13.320
                        Including Accessories          accordance with CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for Electrical Installations; and
                                                       with CAN/ULC‑S524, Installation of Fire Alarm Systems. Refer to CAN/ULC-S541, Speakers for Fire Alarm
                                                       Systems, Including Accessories, for requirements pertaining to speakers.

                                                       This standard also covers protective covers and accessories used with audible signals for fire alarm systems.

CAN-ULC-S525-07-FR      Dispositifs de signalisation   Ces exigences visent les sonneries, les sirènes, les klaxons et autres dispositifs de signalisation sonore             13.220.20     $150.00
                        sonore des réseaux             électriques d'une tension nominale égale ou inférieure à 300 V prévus pour être utilisés avec des réseaux               13.320
                        avertisseurs d'incendie, y     avertisseurs d'incendie, à l'intérieur ou à l'extérieur, conformément au Code canadien de l'électricité, Première
                        compris les accessoires        partie, Norme de sécurité relative aux installations électriques et à la norme CAN/ULC S524, Norme sur
                                                       l'installation des réseaux avertisseurs d'incendie. Pour des exigences sur les haut parleurs, se reporter à la norme
                                                       CAN/ULC S541, Haut parleurs pour réseaux avertisseurs d'incendie, y compris les accessoires.

                                                       La présente norme porte également sur les couvercles de protection et les accessoires utilisés avec les dispositifs
                                                       de signalisation sonore des réseaux avertisseurs d'incendie.

CAN-ULC-S526-07-EN      Visible Signal Devices for     This Standard covers requirements for visible signal devices for use in accordance with CAN/ULC-S524,                  13.220.20     $150.00
                        Fire Alarm Systems,            Installation of Fire Alarm Systems, and in accordance with CSA C22.1, Canadian Electrical Code, Part I, Safety          13.320
                        Including Accessories          Standard for Electrical Installations.

                                                       This standard also covers protective covers and accessories used with visible signals for fire alarm systems.

CAN-ULC-S526-07-FR      Dispositifs à signal visuel    Cette norme porte sur les exigences relatives aux dispositifs à signal visuel aux fins d'utilisation conformément à                  $150.00
                        pour réseaux avertisseurs      la norme CAN/ULC‑S524, Installation des réseaux avertisseurs d'incendie et au Code canadien de l'électricité,
                        d'incendie, y compris les      Première partie, Norme de sécurité relative aux installations électriques (CSA C22.1)
                        accessoires
                                                       La présente norme porte également sur les couvercles de protection et les accessoires utilisés avec les dispositifs
                                                       à signal visuel pour réseaux avertisseurs d'incendie.

ULC-S527-99             Standard for Control Units     This Standard covers requirements for control units, fire alarm systems and control unit accessories for use in        13.220.20     $130.00
                        for Fire Alarm Systems         accordance with the Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524, in accordance with               13.320
                                                       Rule 32-004(1) of the Canadian Electrical Code, Part I, and the National Building Code of Canada. If a fire alarm
                                                       system incorporates the features and functions of a proprietary system, then the requirements of ULC/ORD-
                                                       C693.5, Central Station and Proprietary Fire Protective Signalling Systems Equipment, shall also apply.
                                                       Transponders of distributed type systems are classified as control units and the requirements of this Standard
                                                       shall apply.

                                                       These requirements apply to control units and control unit accessories for ordinary indoor locations.

                                                       These requirements do not apply to field devices unless the device is used as a component of a control unit or
                                                       control unit accessory.

                                                       This Standard does not include safety requirements that are covered by the authority having jurisdiction. The
                                                       requirements of this Standard apply uniformly to all equipment regardless of whether used as a component of
                                                       a control unit or separately enclosed and referred to as a control unit accessory.



ULC-S527-99             Norme Sur Les Postes De Cette norme énonce des exigences visant les postes de contrôle, les réseaux avertisseurs d'incendie et les                    13.220.20     $130.00
                        Contrôle Pour Les Réseaux accessoires des postes de contrôle, qui doivent être utilisés conformément à la norme CAN/ULC-S524,                          13.320
                        Avertisseurs D'incendie   Installation des réseaux avertisseurs d'incendie, à l'article 32‑004 1. du Code canadien de l'électricité,
                                                  Première partie et au Code national du bâtiment du Canada.Si un réseau avertisseur d'incendie comporte
                                                  des caractéristiques et des fonctions d'un réseau breveté, alors la norme ULC/ORD‑C693.5, Central
                                                  Station and Proprietary Fire Protective Signalisation Systems Equipement, s'applique également. Les
                                                  transpondeurs de réseaux répartis sont classés dans la catégorie des postes de contrôle, et ils sont
                                                  visés par cette norme.

                                                       Ces exigences s'appliquent aux postes de contrôle et aux accessoires des postes de contrôle pour les
                                                       utilisations intérieures ordinaires
                                                       .
                                                       Ces exigences ne s'appliquent pas aux dispositifs sauf si ces derniers sont des éléments d'un poste de
                                                       contrôle ou d'un accessoire de poste de contrôle.

                                                       Cette norme ne couvre pas les exigences de sécurité, qui relèvent de l'autorité compétente.Cette norme
                                                       s'applique à tous les appareillages, qu’ils soient intégrés dans un poste de contrôle ou placés dans des
                                                       boîtiers séparés et désignés comme des accessoires de postes de contrôle.




                                                                                                                                                                                           Page 11 of 39
                                                                                  CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                         AND OTHER RECOGNIZED DOCUMENTS
                                                                                CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                        ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                       ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

CAN/ULC-S528-05         Manual Stations for Fire    This Standard covers manual stations and their accessories for installation in ordinary locations, indoor and         13.220.20     $175.00
                        Alarm Systems, Including    outdoor, for use in fire alarm systems.                                                                                13.320
                        Accessories
                                                    This Standard does not cover municipal fire alarm boxes or electrically actuated transmitters.

                                                    This standard also covers manual stations used for ancillary service, such as manual stations for the electrical
                                                    release of extinguishing systems.

CAN/ULC-S528-05         Avertisseurs manuels        La présente norme porte sur les avertisseurs manuels d'incendie et leurs accessoires destinés à être installés        13.220.20     $175.00
                        d'incendie pour les         dans des emplacements ordinaires, à l'intérieur et à l'extérieur, et à être intégrés dans des systèmes d'alarme        13.320
                        systèmes d'alarme           incendie.
                        incendie, y compris les
                        accessoires                 La présente norme ne vise pas les avertisseurs d'incendie municipaux ni les transmetteurs à commande
                                                    électrique.

                                                    La présente norme s'applique également aux avertisseurs manuels d'incendie reliés au service auxiliaire, comme
                                                    les avertisseurs manuels d'incendie qui servent au déclenchement électrique des systèmes d'extinction.
CAN/ULC-S529-02         Smoke Detectors for Fire    This Standard sets forth requirements for ionization-type and photoelectric-type detectors, rated at 300 V or less,   13.220.20     $130.00
                        Alarm Systems               to                                                                                                                     13.320
                                                    be employed in ordinary indoor locations in accordance with the following: Standard for the Installation of Fire
                                                    Alarm
                                                    Systems, CAN/ULC-S524; National Building Code of Canada; and National Fire Code of Canada. This Standard
                                                    covers the following types of detectors: detectors intended for open area protection, for connection to compatible
                                                    control unit for operation as part of a fire alarm system; detectors intended for control of releasing devices such
                                                    as electromagnetic door holders, fire dampers, etc; and duct detectors. This Standard does not cover the
                                                    following:
                                                    detectors for monitoring the smoke density within flues or stacks; power supplies and control units to which the
                                                    detectors are intended to be connected.These are covered under the Standard for Control Units for Fire Alarm
CAN/ULC-S529-02         Détecteurs de Fumée des     Systems - ULC-S527.
                                                    La présente norme énonce les exigences relatives aux détecteurs à ionisation ou photoélectriques, de tension          13.220.20     $130.00
                        Réseaux Avertisseurs        nominale de 300 volts ou moins, utilisés dans des locaux intérieurs ordinaires, et qui sont conformes aux              13.320
                        D'incendie                  exigences énoncées dans les documents suivants : Norme sur l'installation des réseaux avertisseurs d'incendie,
                                                    CAN/ULC-S524; Code national du bâtiment du Canada; Code national de prévention des incendies du Canada.
                                                    La présente norme régit les types de détecteurs suivants : les détecteurs destinés à surveiller des aires
                                                    ouvertes et devant être raccordés à un bloc de contrôle compatible afin de faire partie intégrante d'un réseau
                                                    avertisseur d'incendie; les détecteurs destinés uniquement à commander les dispositifs de déclenchement
                                                    comme les dispositifs électromagnétiques de fermeture de portes et de registres coupe-feu; et les détecteurs
                                                    pour conduits. La présente norme ne régit pas les appareils suivants : les détecteurs surveillant la densité de
                                                    fumée dans les conduits de fumée et les conduits de cheminée; les sources d'alimentation électrique et les
                                                    blocs de commande auxquels les détecteurs sont destinés à être raccordés. Ces appareils font l'objet de la
                                                    norme ULC-S527, intitulée Norme sur les postes de contrôle pour les réseaux avertisseurs d'incendie.



CAN/ULC-S531-02         Standard for Smoke-Alarms                                                                                                                         13.220.20     $130.00
                                                    This Standard sets forth requirements for smoke-alarms, single-station and multiple-station type, rated 120 V or       13.320
                                                    less, intended for open area protection in ordinary indoor locations.

                                                    A smoke-alarm, as defined by these requirements, is a self-contained unit which consists of an assembly of
                                                    electrical components including a smoke chamber, alarm-sounding appliance, and provision for connection to a
                                                    power supply source, either by splice leads, terminals, a cord and plug arrangement, or containing integral
                                                    batteries.




CAN/ULC-S531-02         Norme détecteurs de         La présente norme énonce les exigences relatives aux détecteurs de fumée simples ou interconnectés, de tension        13.220.20     $130.00
                        fumée                       nominale de 120 volts maximum et qui sont destinés à protéger des aires ouvertes dans des locaux intérieurs            13.320
                                                    ordinaires.

                                                    Dans la présente norme, l’expression « détecteur de fumée » désigne un appareil autonome constitué d’un
                                                    ensemble de composants électriques, dont un compartiment sensible à la fumée et un dispositif de
                                                    déclenchement d’alarme, et qui renferme des piles ou est relié à une source d’alimentation électrique au moyen
                                                    de fils épissurés, de bornes de connexion ou d’un cordon de branchement muni d’une fiche.

CAN/ULC-S532-07         Standard for the Regulation These requirements are for use in the regulation of agencies servicing portable fire extinguishers. This Standard     03.080.10     $145.00
                        of the Servicing of Portable is intended to assist in the implementation of the requirements of the National Fire Code of Canada. The Stanard     13.220.10
                        Fire Extinguishers           for Portable Fire Extinguishers, NFPA 10, or other Standards referenced by the authority having jurisdiction.




CAN/ULC-S532-07         Réglementation de           Les présentes exigences sont destinées à être utilisées pour établir laréglementation des entreprises qui font        03.080.10     $145.00
                        l’entretien et du           l'entretien, l'essai hydrostatique etle rechargement des extincteurs à incendie portables. La présente norme a        13.220.10
                        rechargement des            pour but d'aider à la mise en application du Codenational de prévention des incendies du Canada, de la norme
                        extincteurs à incendie      NFPA 10 et desautres normes prescrites par l'autorité compétente. Les présentes exigences ne s'appliquent
                        portables                   pas au remplissage ou chargementd'un extincteur à incendie portable avant sa vente initiale par son fabricant.

ULC-S533-02             Standard For Egress Door    This standard shall apply to egress door securing and releasing devices to perform the function of holding a door      91.190       $110.00
                        Securing And Releasing      in the closed position and releasing the door to permit free egress when operated. Egress door securing and           13.220.20
                        Devices                     releasing devices are considered ancilliary devices and are not an integral part of the fire alarm system. This
                                                    standard covers requirements for egress door securing and releasing devices for use in accordance with the
                                                    Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524, and in accordance with C22.1, Canadian
                                                    Electrical Code, Part 1, Safety Standard for Electrical Installations.These requirements cover devices for use
                                                    in ordinary (non-hazardous) indoor locations and locations opening to the outdoors.Devices for use in hazardous
                                                    locations shall comply with the requirements of this Standard and the applicable requirements of C22.1,
                                                    Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations, with respect to the location
                                                    hazard.

CAN/ULC-S536-97         Standard for the Inspection This Standard provides requirements for the inspection and testing of fire alarm systems and specifies the            13.220.20     $115.00
                        and Testing of Fire Alarm   devices and functions to be inspected, tested, and documented for the initial inspection and test and the              13.320
                        Systems                     periodic inspection and test.                                                                                          19.020


CAN/ULC-S536-97         Norme Sur L’inspection Et   La présente norme énonce les exigences relatives à l'inspection et à l'essai des réseaux avertisseurs d'incendie      13.220.20     $115.00
                        La Mise À L’essai Des       et précise les dispositifs, les fonctions et les caractéristiques qui doivent être inspectés, mis à l'essai et         13.320
                        Réseaux Avertisseurs        consignés aux fins de l'inspection et de la mise à l'essai initiales et périodiques.                                   19.020
                        D’incendie
CAN/ULC-S536-04         Inspection and Testing of   This Standard provides requirements for the inspection and testing of fire alarm systems and specifies the            13.220.20     $150.00
                        Fire Alarm Systems          devices and functions to be inspected , tested , and documented for the periodic inspection and test.                  13.320
                                                                                                                                                                           19.020




                                                                                                                                                                                       Page 12 of 39
                                                                                        CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                               AND OTHER RECOGNIZED DOCUMENTS
                                                                                      CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                              ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.     TITLE                           ABSTRACT                                                                                                                 ICS CODE         PRICE (CDN)

CAN/ULC-S536-04           Inspection Et Mise À            La présente norme énonce les exigences relatives à l'inspection et à la mise à l'essai des réseaux avertisseurs          13.220.20          $150.00
                          L'essai Des Réseaux             d'incendie et précise les dispositifs, les fonctions et les caractéristiques qui doivent être inspectés, mis à l'essai    13.320
                          Avertisseurs D'incendie         et consignés aux fins de l'inspection et de la mise à l'essai périodiques.                                                19.020


CAN/ULC-S537-97           Standard for the                This standard prescribes inspection and test procedures for the purpose of verifying that the fire alarm system is       13.220.20          $115.00
                          Verification of Fire Alarm      installed in conformance with the design and CAN/ULC-S524, Standard for the Installation of Fire Alarm                    13.320
                          Systems                         Systems, and performs all of its intended functions as designed.

CAN/ULC-S537-97           Norme Sur La Vérification       Cette norme spécifie le mode opératoire d'inspection et de mise à l'essai permettant de vérifier que les réseaux         13.220.20          $115.00
                          Des Réseaux Avertisseurs        avertisseurs d'incendie sont installés conformément aux exigences de la conception et à la norme                          13.320
                          D'incendie                      CAN/ULC-S524, et que toutes les fonctions prévues de ces réseaux sont exécutées conformément à la
                                                          conception.

CAN/ULC-S537-04           Verification of Fire Alarm      This standard prescribes inspection and test procedures for the purpose of verifying that the fire alarm system          13.220.20          $150.00
                          Systems                         is installed in conformance with the design and CAN/ULC-S524, Standard for the Installation of Fire Alarm                 13.320
                                                          Systems, and performs all of its intended functions as designed

CAN/ULC-S537-04           Vérification Des Réseaux        Cette norme spécifie le mode opératoire d'inspection et de mise à l'essai permettant de vérifier que les réseaux         13.220.20          $150.00
                          Avertisseurs D'incendie         avertisseurs d'incendie sont installés conformément aux exigences de la conception et à la norme CAN/ULC-                 13.320
                                                          S524 (Norme sur l'installation des réseaux avertisseurs d'incendie), et que toutes les fonctions prévues de ces
                                                          réseaux sont exécutées conformément à la conception.



CAN/ULC-S540-M86(R1999)   Standard for the Installation These requirements cover the installation of residential fire warning systems for use within dwelling units.               13.220.20          $110.00
                          of Residential Fire Warning                                                                                                                               13.320
                          Systems

CAN-ULC-S541-07-EN                                        These requirements apply to speakers, rated at 300 V or less, for fire-protective signalling service and intended for                       $150.00
                                                          indoor and/or outdoor installation in accordance with CSA C22.1 Canadian Electrical Code, Part I, Safety
                          Speakers for Fire Alarm         Standard for Electrical Installations; and CAN/ULC S524, Installation of Fire Alarm Systems. Refer to CAN/ULC-
                          Systems, Including              S525, Audible Signal Devices for Fire Alarm Systems, Including Accessories, for requirements pertaining to            13.220.20; 13.320
                          Accessories                     audible signal devices.

                                                     This Standard also covers protective covers and other accessories used with speakers for fire alarm systems.
CAN-ULC-S541-07-FR                                   Ces exigences visent les haut parleurs d'une tension nominale égale ou inférieure à 300 V prévus pour être                                       $150.00
                                                     utilisés avec des réseaux avertisseurs d'incendie, à l'intérieur ou à l'extérieur, conformément au Code canadien de
                                                     l'électricité, Première partie, Norme de sécurité relative aux installations électriques (CSA C22.1) et à la norme
                          Haut parleurs pour réseaux CAN/ULC S524, Installation des réseaux avertisseurs d'incendie. Pour des exigences relatives aux dispositifs de
                          avertisseurs d'incendie, y signalisation sonore, se reporter à la norme CAN/ULC S525, Dispositifs de signalisation sonore des réseaux          13.220.20; 13.320
                          compris les accessoires    avertisseurs d'incendie, y compris les accessoires.

                                                          La présente norme porte également sur les revêtements protecteurs et les accessoires utilisés avec les haut
                                                          parleurs pour réseaux avertisseurs d'incendie.
CAN4-S543-M84             Standard for Internal Lug       This Standard contains requirements for non-threaded, quick-connect couplings of the internal lug design for use         13.220.10          $110.00
Amendments 1-2            Quick-Connect Coulings for      in fire protection service. accommodate the attachment of couplings of the internal lug design.
                          Fire Hose
ULC-S545-02               Residential Fire Warning        Covers requirements for residential fire warning system control units and accessories intended to be installed in        13.220.20          $130.00
                          Alarm Systems Control           accordance with the Standard for the Installation of Residential Fire Warning Systems, CAN/ULC-S540.                      13.320
                          Units
ULC-S548-02               Alarm Initiating and            Contains requirements for Alarm Initiating and Supervisory Detection Devices for attachment to water type                13.220.20          $130.00
                          Supervisory Devices for         extinguishing systems(such as wet, dry and deluge type sprinklers, residential sprinklers, water mist                     13.320
                          Water Type Extinguishing        suppression systems, and standpipe systems), as follows A) Alarm Initiating Devices, including but not
                          Systems                         limited to: (i) Vane and paddle type waterflow switches; and (ii) Pressure actuated waterflow switches; B)
                                                          Supervisory Indicating Devices, including but not limited to: (i) Pressure supervisory switches; (ii) Shut-off
                                                          valve position supervisory switches; (iii) Water level supervisory switches; and (iv) Temperature Supervisory
                                                          Switches.
ULC-S551-1995             Standard For Forged             These requirements cover quick-connect couplings and adapters of the external lug design for use with forestry           13.220.10          $115.00
                          External-Lug Quick-             fire                                                                                                                     65.060.80
                          Connect Couplings And           hose of the 38 mm standard size.
                          Adapters For Forestry Fire
                          Hose
CAN/ULC-S552-02           =Standard for Maintenance       This Standard applies to the maintenance and testing of smoke-alarms within dwelling units as well as within             13.220.20          $110.00
                          and Testing of Smoke            sleeping rooms that are not part of dwelling units.                                                                        19.02
                          Alarms
CAN/ULC-S552-02           Norme sur l'entretien et la     Cette norme vise l’entretien et la mise à l’essai des avertisseurs de fumée dans les logements ainsi que dans les        13.220.20          $110.00
                          mise a l'essai des              pièces où l’on dort et qui ne font pas partie des logements.                                                               19.02
                          avertisseurs de fumee
CAN/ULC-S553-02           Standard for the Installatoin   This Standard applies to the installation of smoke-alarms within dwelling units as well as within sleeping rooms         13.220.20          $110.00
                          of Smoke Alarms                 that are not part of dwelling units.                                                                                      13.320

CAN/ULC-S553-02           Norme sur l'installation des Cette norme vise l’installation des avertisseurs de fumée dans les logements ainsi que dans les pièces où l’on              13.220.20          $110.00
                          avertissuers de fumee        dort et qui ne font pas partie des logements.                                                                                13.320

CAN/ULC-S554-05           Standard for Water Based        This is the common UL and ULC Standard for Water Based Agent Fire Extinguishers. It is the Second edition of             13.220.10          $160.00
Amendment 1               Agent Fire Extinguishers        CAN/ULC-S554, and the Sixth edition of ANSI/UL 8. These requirements cover the construction and
                                                          performance, exclusive of performance during fire tests, of portable water based agent fire extinguishers.
                                                          These fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire
                                                          Extinguishers, NFPA 10 and with the National Fire Code of Canada. The requirements for performance
                                                          during fire testing of water based agent fire extinguishers are specified in the Binational Standard for Rating
                                                          and Fire Testing of Fire Extinguishers, ANSI/UL 711/CAN/ULC-S508.


CAN/ULC-S554-05           Norme sur les extincteurs à Ce document constitue la norme harmonisée UL et ULC, Extincteurs à agent à base d'eau. Il s’agit de la                       13.220.10          $160.00
Modification 1            agent à base d'eau          deuxième édition de la norme CAN/ULC-S554, et de la sixième édition de la norme ANSI/UL 8. Ces
                                                      exigences visent la construction et le fonctionnement des extincteurs portatifs à agent à base d'eau.
                                                      Elles ne visent toutefois pas le fonctionnement au cours des essais de réaction au feu. Ces extincteurs
                                                      sont destinés à être utilisés conformément à la norme NFPA 10, Standard for Portable Fire Extinguishers
                                                      et au Code national de prévention des incendies du Canada. Les exigences relatives au fonctionnement
                                                      des extincteurs à agent à base d'eau au cours des essais de réaction au feu sont spécifiées dans la
                                                      norme binationale relative à la classification et essais sur foyers types des extincteurs, ANSI/UL 711/
                                                      CAN/ULC-S508.

ULC-S555-01               Standard for Fire and           These requirements apply to technical rescue rope and water rescue throw rope, and associated equipment                  13.220.30          $110.00
                          Emergency Service               used by rescue services. Part A covers the requirements for technical rescue rope used by emergency                      59.080.50
                          Technical Rescue Ropes          services for the purpose of raising, lowering or horizontally moving a maximum of two people; Part B covers
                          and Water Rescue Throw          the requirements for body support devices associated with technical rope, not including Class 1 body support
                          Ropes and Associated            devices; Part C covers the requirements for hardware associated with technical rescue; Part D covers the
                          Equipment                       requirements for water rescue throw ropes used by rescue services for the purpose of securing or retrieving
                                                          one person from water.




                                                                                                                                                                                                     Page 13 of 39
                                                                                      CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                             AND OTHER RECOGNIZED DOCUMENTS
                                                                                    CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                            ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                         ABSTRACT                                                                                                                    ICS CODE    PRICE (CDN)

ULC-S557-06             Standard for Back-Pack        These requirements apply to the construction and performance of back-pack fire extinguishers                                13.220.10     $130.00
                        Fire Extinguishers            for use in fighting forest, brush, and grass fires. Back-pack extinguishers shall be classified
                                                      under the following types:

                                                      Type 1 - Rigid Metal Tank
                                                      Type 2 - Rigid Plastic Tank
                                                      Type 3 - Soft Tank

                                                      Back-pack fire extinguishers are intended for the use with water, wetting agents, and Class
                                                      A foams.

ULC-S558-95             Standard for External-Lug     This Standard contains requirements for 25 and 38 mm quick-connect couplings and adapters of the external lug               21.120.20     $115.00
                        Quick-Connect Couplings       design for use in the forestry service.                                                                                     23.040.70
                        and Adapters for Forestry                                                                                                                                 13.220.10
                        Fire Hose
CAN/ULC-S559-04         Equipment For Fire Signal     This Standard covers requirements for fire signal receiving centre and systems which include transmitting,                  13.220.20     $150.00
                        Receiving Centres And         receiving equipment and proprietary fire signal receiving centre equipment and control unit accessories                      13.320
                        Systems                       for use in accordance with the following: CAN/ULC-S524, Installation of Fire Alarm Systems;                                  13.310
                                                      CAN/ULC-S561, Installation and Services for Fire Signal Receiving Centres and Systems; C22.1, Canadian
                                                      Electrical Code, Part l, Safety Standard for Electrical Installations, and Figure 1, Typical Arrangement of
                                                      Equipment for Fire Signal Receiving Centres and Systems."Where the equipment covered by the scope
                                                      of this Standard incorporates the features and functions of a fire alarm system, the requirements of
                                                      ULC-S527, Control Units for Fire Alarm Systems, shall also apply. CAN/ULC-S524, Installation of Fire Alarm
                                                      Systems; CAN/ULC-S561, Installation and Services for Fire Signal Receiving Centres and Systems; C22.1,
                                                      Canadian Electrical Code, Part l, Safety Standard for Electrical Installations, and Figure 1, Typical
                                                      Arrangement of Equipment for Fire Signal Receiving Centres and Systems. Where the equipment covered
                                                      by the scope of this Standard incorporates the features and functions of a fire alarm system, the requirements
                                                      of ULC-S527, Control Units for Fire Alarm Systems, shall also apply.
                                                      Where the equipment covered by the scope of this Standard incorporates transponders of distributed type
                                                      systems, the requirements of ULC-S527, Control Units for Fire Alarm Systems, shall also apply.


CAN/ULC-S559-04         Équipement Des Systèmes       La présente norme porte sur les exigences relatives aux systèmes et aux centrales de réception d'alarme                     13.220.20     $150.00
                        Et Des Centrales De           incendie, notamment sur le matériel de transmission et de réception et l'équipement de centrale de réception                 13.320
                        Réception D'alarme            d'alarme incendie privée et les accessoires de poste de contrôle devant être utilisés conformément aux                       13.310
                        Incendie                      éléments suivants : CAN/ULC-S524, Installation des réseaux avertisseurs d'incendie; CAN/ULC-S561,
                                                      Installation et services – systèmes et centrales de réception d'alarme incendie; C22.1, Code canadien de
                                                      l'électricité, Première partie, Norme de sécurité relative aux installations électriques; Figure 1, Arrangement
                                                      type de l'équipement des systèmes et des centrales de réception d'alarme incendie. Lorsque l'équipement
                                                      entrant dans le domaine d'application de la présente norme incorpore les caractéristiques et les fonctions
                                                      d'un système d'alarme incendie, les exigences de la norme ULC-S527, Control Units for Fire Alarm Systems
                                                      (postes de contrôle pour les réseaux avertisseurs d'incendie), s'appliquent également.
                                                      Lorsque l'équipement entrant dans le domaine d'application de la présente norme incorpore des transpondeurs
                                                      de systèmes répartis, les exigences de la norme ULC-S527, Control Units for Fire Alarm Systems
                                                      (postes de contrôle pour les réseaux avertisseurs d'incendie), s'appliquent également.



CAN/ULC-S560-06         Standard for Category 3       ########################################################################################                                    13.220.10     $145.00
                        Aqueous Film-Forming                                                                                                                                      13.220.99
                        Foam (AFFF) Liquid
                        Concentrates




CAN/ULC-S560-06         Norme sur les concentrés      Les normes sur les concentrés liquides de mousse sont divisées en trois catégories. Catégorie 1 – Mousse                    13.220.10     $145.00
                        liquides de mousse formant    destinée principalement à tous les types de feux d'hydrocarbures; Catégorie 2 – Mousse destinée principalement              13.220.99
                        un film flottant extincteur   aux feux de solvants polaires, de combustibles oxygénés et de combustibles miscibles à l'eau, ainsi qu'à toutes les
                        (mousse AFFF), de             applications de la catégorie 1; Catégorie 3 - Mousse destinée principalement aux opérations de sauvetage et de
                        catégorie 3                   lutte contre les incendies d'aéronefs, ainsi qu'à toutes les applications de la catégorie 1. Cette norme vise les
                                                      concentrés liquides de mousse formant un film flottant extincteur (mousse AFFF), de catégorie 3. NOTE: Les
                                                      exigences visant les concentrés liquides de mousse de fluoroprotéines formant un film extincteur (mousse FFFP),
                                                      de catégorie 3, sont énoncées dans la norme CAN/ULC-S563. Les concentrés de mousse liquide dilués à 1, 3 ou
                                                      6 % avec de l'eau douce ou avec de l'eau de mer sont principalement destinés aux véhicules de sauvetage et de
                                                      lutte contre les incendies d'aéronefs, mais on peut aussi les utiliser avec des dispositifs mobiles, portatifs et fixes
                                                      d'extincteurs à mousse, y compris les systèmes de gicleurs mousse-eau conformes à la norme visant les
                                                      concentrés liquides de mousse, des catégories 1 et 2, (ULC-S564), pour l'extinction des surface enflammées à
CAN/ULC-S561-03         Installation And Services     l'occasion d'incendies d'hydrocarbures liquides inflammables ordinaires. Ces exigences ne remplacent pas celles
                                                      This Standard covers the:                                                                                                   13.220.20     $185.00
                        For Fire Signal Receiving     A Construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire           13.310
                        Centres And Systems           protective signalling services utilizing fire signal receiving centre facilities and satellite centres, signal processing
                                                      centres and bridging centres;
                                                      B Construction and operation of a proprietary fire signal receiving centre; and
                                                      C Installation, inspection and tests applicable to signal transmitting units and its field device inputs at the protected
                                                      premises.

                                                      This Standard does not include the test, inspection, maintenance, installation and service of the building
                                                      fire alarm system at the protected premises, as required in the Standard for the Installation of Fire Alarm
                                                      Systems, CAN/ULC-S524; Standard for the Inspection and Testing of Fire Alarm Systems; CAN/ULC-S536;
                                                      and the Standard for the Verification of Fire Alarm Systems, CAN/ULC-S537.




                                                                                                                                                                                               Page 14 of 39
                                                                                   CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                          AND OTHER RECOGNIZED DOCUMENTS
                                                                                 CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                         ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                        ABSTRACT                                                                                                                  ICS CODE      PRICE (CDN)

CAN/ULC-S561-03         Installation Et Services –   La présente norme porte sur les éléments suivants :                                                                       13.220.20       $185.00
                        Systèmes Et Centrales De     A Construction, exploitation, installation, inspection et essais applicables aux centrales de réception d'alarme           13.310
                        Réception D'alarme           incendie des services d'avertissement de protection incendie utilisant des centres de réception d'alarme
                        Incendie                     incendie et des centres satellites, des centres de traitement des alarmes et des centres de transition.
                                                     B Construction et exploitation d'une centrale de réception d'alarme incendie privée.
                                                     C Installation, inspection et essais applicables aux postes de transmission des alarmes et aux dispositifs
                                                     extérieurs sur les lieux protégés.

                                                     Le domaine d'application n'englobe pas les essais, l'inspection, la maintenance, l'installation ni les services du
                                                     système d'alarme incendie de l'immeuble sur les lieux protégés, comme l'exige la norme sur l'installation des
                                                     réseaux avertisseurs d'incendie (CAN/ULC-S524), la norme sur l'inspection et la mise à l'essai des réseaux
                                                     avertisseurs d'incendie (CAN/ULC-S536) et la norme sur la vérification des réseaux avertisseurs d'incendie
                                                     (CAN/ULC-S537).




ULC-S562-06             Standard for Class "A"       This Standard specifies requirements and test procedures for foam chemicals used on Class "A" fuels.                      13.220.10       $145.00
                        Foams
CAN/ULC-S563-06         Standard fro Category 3      The Standards for foam liquid concentrates are divided into three categories. Category 1 - Primarily for use on           13.220.10       $145.00
                        Film-Forming                 general-purpose hydrocarbon fires; Category 2 - Primarily for use on polar solvents, oxygenated fuels, and water-         71.100.99
                        Fluoroprotein (FFFP) Foam    miscible fuels and all Category 1 applications; Category 3 - Primarily for use on aircraft rescue fire fighting and all   13.220.99
                        Liquid Concentrates          Category 1 applications. This Standard refers to Category 3 Film-Forming Fluoroprotein (FFFP) Foam Liquid
                                                     Concentrates. NOTE: The requirements for Category 3 Aqueous Film-Forming Foam (AFFF) Liquid Concentrates
                                                     are contained in the Standard CAN/ULC-S560. The foam liquid concentrate at 3% or 6% dilution with fresh or sea
                                                     water are intended primarily for use in aircraft rescue and firefighting vehicles (ARFF) but are also suitable for use
                                                     in mobile, portable and fixed airfoam installations, including foam-water sprinkler systems which have been proven
                                                     suitable to meet the requirements of the Standard for Categories 1 and 2 Foam Liquid Concentrates, ULC-S564,
                                                     in surface extinguishment of fires involving ordinary hydrocarbon flammable liquids. These requirements do not
                                                     supersede requirements prescribed in legislation or regulation by the authority having jurisdiction.
CAN/ULC-S563-06         Norme sur les concentrés     Les normes sur les concentrés liquides de mousse sont divisées en trois catégories. Catégorie 1 – Mousse                  13.220.10       $145.00
                        liquides de mousse de        destinée principalement à tous les types de feux d'hydrocarbures; Catégorie 2 – Mousse destinée principalement            71.100.99
                        fluoroprotéines formant un   aux feux de solvants polaires, de combustibles oxygénés et de combustibles miscibles à l'eau, ainsi qu'à toutes les       13.220.99
                        film extincteur (mousse      applications de la catégorie 1; Catégorie 3 - Mousse destinée principalement aux opérations de sauvetage et de
                        FFFP), de catégorie 3        lutte contre les incendies d'aéronefs, ainsi qu'à toutes les applications de la catégorie 1. Cette norme vise les
                                                     concentrés liquides de mousse de fluoroprotéines formant un film extincteur (mousse FFFP), de catégorie 3.
                                                     NOTE: Les exigences visant les concentrés liquides de mousse formant un film flottant extincteur (mousse
                                                     AFFF), de catégorie 3, sont énoncées dans la norme CAN/ULC-S560. Les concentrés de mousse liquide dilués à
                                                     3 ou 6 % avec de l'eau douce ou avec de l'eau de mer sont principalement destinés aux véhicules de sauvetage et
                                                     de lutte contre les incendies d'aéronefs, mais on peut aussi les utiliser avec des dispositifs mobiles, portatifs et
                                                     fixes d'extincteurs à mousse, y compris les systèmes de gicleurs mousse-eau conformes à la norme visant les
ULC-S564-06             Standard for Categories 1    The Standards for foam liquid concentrates are 1 et 2, (ULC-S564), pour l'extinction des surface enflammées à
                                                     concentrés liquides de mousse, des catégories divided into three categories: Category 1 Category 2 Category 3.            13.220.10       $145.00
                        and 2 Foam Liquid            Primarily for use on general purpose on polar solvents, on aircraft rescue hydrocarbon fires oxygenated fuels,
                        Concentrates                 firefighting + all and water-miscible Category 1 fuels + all Category 1 applications applications This Standard
                                                     refers to Categories 1 and 2 foam liquid concentrates. NOTE: The requirements for Category 3 Aqueous
                                                     Film-Forming Foam (AFFF) Liquid Concentrates are contained in the Standard CAN/ULC-S560 and the
                                                     requirements for Category 3 Film-Forming Fluoroprotein (FFFP) Foam Liquid Concentrates are contained in
                                                     the Standard CAN/ULC-S563.1.2 These requirements cover foam producing equipment and liquid concentrates
                                                     employed for the production and discharge of foam that has an expansion ratio of 20:1 or less and is used for
                                                     fire extinguishment. These requirements are based on the premise that foam equipment and specified types of
                                                     foam liquid concentrates with which they are intended to be used are to be investigated for use with each other.
                                                     1.3 If foam equipment covered by these requirements incorporate sprinklers, the sprinklers shall comply with the
                                                     requirements for Automatic Sprinklers for Fire-Protection Service, ULC/ORD-C199.1.4 Requirements for the
                                                     installation and use of foam equipment and liquid concentrates are included in the following Standards of the
                                                     National Fire Protection Association:
                                                     A Standard for Low Expansion Foam, NFPA 11;
                                                      B Standard for the Installation of Deluge Foam-Water Sprinkler and Foam-Water Spray Systems, NFPA 16;
                                                     and
                                                     C Standard for the Installation of Closed-Head Foam-Water Sprinkler Systems, NFPA 16A.
CAN/ULC-S566-05         Standard for Halocarbon      This is the common UL and ULC Standard for Halocarbon Clean Agent Fire Extinguishers. It is the First edition             13.220.10       $160.00
Amendment 1             Clean Agent Fire             of CAN/ULC-S566, and the Second edition of ANSI/UL 2129. These requirements cover the construction and
                        Extinguishers                performance, exclusive of performance during fire tests, of portable halocarbon clean agent fire extinguishers.
                                                     Halocarbon clean agent fire extinguishers are intended to be utilized in accordance with the Standard for
                                                     Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. The requirements for
                                                     performance during fire testing of halocarbon clean agent fire extinguishers are specified in the Binational
                                                     Standard for Rating and Fire Testing of Fire Extinguishers, ANSI/UL 711 CAN/ULC-S508.



CAN/ULC-S566-05         Norme sur les extincteurs    Ce document constitue la norme harmonisée UL et ULC, Extincteurs aux agents propres à l'halocarbure. Il s’agit            13.220.10       $160.00
Modification 1          aux agents propres à         de la première édition de la norme CAN/ULC-S566, et de la deuxième édition de la norme ANSI/UL 2129. Ces
                        l'halocarbure                exigences visent la construction et le fonctionnement des extincteurs portatifs aux agents propres à l'halocarbure.
                                                     Elles ne visent toutefois pas le fonctionnement au cours des essais de réaction au feu. Les extincteurs aux
                                                     agents propres à l'halocarbure sont destinés à être utilisés conformément à la norme NFPA 10, Standard for
                                                     Portable Fire Extinguishers et au Code national de prévention des incendies du Canada. Les exigences relatives
                                                     au fonctionnement des extincteurs aux agents propres à l'halocarbure au cours des essais de réaction au feu
                                                     sont spécifiées dans la norme binationale relative à la classification et essais sur foyers types des extincteurs,
                                                     ANSI/UL 711/CAN/ULC-S508.



ULC-S601-00             Standard for Shop            These requirements cover single and double wall cylindrical horizontal steel non-pressure tanks that are used             23.020.10       $130.00
                        Fabricated Steel             for the aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar            75.200
*SEE also "Technical    Aboveground Horizontal       products with a relative density not greater than 1.0. These requirements cover tanks which are fabricated,
Supplements for         Tanks for Flammable and      inspected and tested for leakage before shipment from the factory.These requirements do not cover tanks of
the Refurbishing of     Combustible Liquids          capacities greater than 200 000 L.
Underground and
Aboveground Tanks"
CAN/ULC-S602-07         Standard for Aboveground     This Standard covers the design and construction of aboveground steel non- pressure tanks intended for                    23.2020.10,     $250.00
                        Steel Tanks for Fuel Oil     installation inside or outside buildings and for the storage of combustible liquid intended to be used as heating fuel     75.160.20
                        and Lubricating Oil          and/or generator fuel and lubricating oil.
                                                       It covers single wall tanks, tanks with secondary containment and double bottom tanks, having a maximum
                                                     capacity of 2500 L.
                                                     This Standard covers tanks fabricated, inspected and tested for leakage before shipment from the factory for use
                                                     in stationary installations. These tanks are not intended for the transportation of fuel nor are they intended to be
                                                     transported while containing fuel.




                                                                                                                                                                                              Page 15 of 39
                                                                                           CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                  AND OTHER RECOGNIZED DOCUMENTS
                                                                                         CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                 ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.          TITLE                         ABSTRACT                                                                                                                  ICS CODE      PRICE (CDN)

CAN/ULC-S602-07                Norme sur les réservoirs en La présente norme porte sur la conception et la construction de réservoirs non pressurisés non enterrés en acier            23.2020.10,     $250.00
                               acier non enterrés pour le destinés à être installés à l'intérieur ou à l'extérieur de bâtiments et au stockage de liquide combustible destiné à         75.160.20
                               mazout et l’huile lubrifiante être utilisé comme huile de chauffage ou huile pour génératrice et huile lubrifiante.
                                                             La présente norme porte sur les réservoirs à paroi simple, les réservoirs à confinement secondaire et les
                                                             réservoirs à double fond, dont la capacité maximale est de 2500 L.
                                                             La présente norme porte sur les réservoirs fabriqués, et ayant fait l'objet d'une inspection et d'un essai pour
                                                             déceler les fuites avant leur expédition de l'usine reservoirs destinés aux installations stationnaires. Ces réservoirs
                                                             ne sont pas destinés au transport de combustible ou à être transportés alors qu'ils contiennent du combustible.


CAN/ULC-S602-03 including      Aboveground Steel Tanks       This Standard covers the design and construction of aboveground steel tanks of the non-pressure type, intended            23.020.10       $150.00
Amendments 1 & 2               for the Storage of            for installation inside or outside buildings and for the storage of combustible liquids intended to be used as            75.160.20
                               Combustible Liquids           heating fuel and/or generator fuel. This Standard covers single wall tanks and tanks with secondary
SUPERCEDED                     Intended To Be Used as        containment, having a maximum capacity of 2500 L. This Standard covers tanks for use in stationary
                               Heating and/or Generator      installations, fabricated, inspected and tested for leakage before shipment from the factory.
                               Fuels

CAN/ULC-S602-03 incluant les   Réservoirs En Acier Non       La présente norme porte sur la conception et la fabrication de réservoirs en acier non enterrés et non                    23.020.10       $150.00
modifications 1 `a 2           Enterrés Destinés Au          pressurisés pouvant être installés à l'intérieur ou à l'extérieur de bâtiments et destinés au stockage                    75.160.20
                               Stockage Des Liquides         de liquides combustibles utilisés comme huile de chauffage ou huile pour génératrice. Cette norme
REMPLACER                      Combustibles Utilisés         porte sur les réservoirs à paroi simple ainsi que les réservoirs à confinement secondaire, dont la
                               Comme Huile De                capacité maximale est de 2 500 L. Cette norme porte sur les réservoirs fabriqués, et ayant fait l'objet
                               Chauffage Ou Huile Pour       d'une inspection et d'un essai pour déceler les fuites avant leur expédition de l'usine, et destinés aux
                               Génératrice                   installations stationnaires.


ULC-S603-00                    Standard for Steel            This standard contains the requirements that cover single and double wall cylindrical steel tanks of the                  23.020.10       $130.00
                               Underground Tanks for         horizontal, non-pressure type that are used for the underground storage of Flammable Liquids and
*SEE also "Technical           Flammable And                 Combustible Liquids, such as gasoline, fuel oil, or similar products.
Supplements for                Combustible Liquids
the Refurbishing of
Underground and
Aboveground Tanks"

CAN/ULC-S603.1-03              External Corrosion            These requirements cover external corrosion protection systems on carbon steel underground storage tanks.                 23.020.10       $130.00
                               Protection Systems for        These external corrosion protection systems are intended to be installed, operated and maintained in                      75.160.20
                               Steel Underground Tanks       accordance with the manufacturer's instructions.These requirements cover external corrosion protection
                               for Flammable and             systems for steel tanks manufactured in accordance with the applicable requirements of ULC-S603, Standard
                               Combustible Liquids           for Steel Underground Tanks for Flammable and Combustible Liquids, which are used for the underground
                                                             storage of flammable and combustible liquids such as gasoline, fuel oil, and similar products. In addition to
                                                             meeting the construction and performance requirements contained in ULC-S603, Standard for Steel
                                                             Underground Tanks for Flammable and Combustible Liquids, construction of corrosion protected steel
                                                             underground tanks shall comply with the applicable requirements of this Standard. Tanks covered by these
                                                             requirements are intended for installation and use in accordance with the requirements outlined in ULC-S603,
                                                             Standard for Steel Underground Tanks for Flammable and Combustible Liquids and other documents.




CAN/ULC-S603.1-03              Systèmes De Protection        Les présentes exigences portent sur les systèmes de protection contre la corrosion extérieure des réservoirs              23.020.10       $130.00
                               Contre La Corrosion           enterrés en acier au carbone. Ces systèmes de protection contre la corrosion extérieure sont destinés à être              75.160.20
                               Extérieure Des Réservoirs     installés, mis en œuvre et entretenus conformément aux spécifications du fabricant. Ces exigences portent
                               Enterrés En Acier Pour Les    sur les systèmes de protection contre la corrosion extérieure pour les réservoirs en acier fabriqués conformé-
                               Liquides Inflammables Et      ment aux exigences applicables de la norme ULC-S603, Réservoirs enterrés en acier pour les liquides
                               Combustibles                   inflammables et combustibles, qui sont utilisés pour le stockage souterrain des liquides inflammables et
                                                             combustibles, notamment l'essence, le mazout et les produits semblables. En plus de satisfaire aux exigences
                                                             relatives à la construction et au rendement contenues dans la norme ULC-S603, Réservoirs Enterrés en Acier
                                                             pour les Liquides Inflammables et Combustibles, la construction des réservoirs enterrés en acier protégés contre
                                                             la corrosion doit être conforme aux exigences applicables de cette norme. Les réservoirs visés par ces
                                                             exigencessont destinés à une installation et une utilisation conformes aux exigences prescrites dans la norme
                                                             ULC-S603, Réservoirs Enterrés en Acier pour les Liquides Inflammables et Combustibles, et dans d'autres
                                                             documents.
CAN/ULC-S604-M91               Standard for Factory-Built    These requirements apply to Factory-Built Type 'A' Chimneys which do not require field fabrication. They are              91.060.40       $110.00
Amendments 1-4                 Type A Chimneys               for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance
                                                             or equipment flue-gas temperatures do not exceed 540 degrees C. They are intended for use in accordance
                                                             with the National Building Code of Canada, Installation Code for Oil Burning Equipment, CAN/CSA-B139,
                                                             and for Gas Burning Equipment,CAN/CGA-B149.1 and CAN/CGA-B149.2. They are intended for installation
                                                             inside or outside of buildings to provide an essentially vertical conduit or passageway for conveying flue
                                                             gases to the outer ir from the above-described class of appliances.


CAN/ULC-S605-M91               Standard for Gas Vents        Covers the design and construction of Type B (round or oval) and Type Bw Gas Vents. Type B Gas Vents are                  91.060.40       $110.00
Amendments 1-4                                               intended for the venting of flue gases having temperatures not exceeding 245 degrees C, from gas-fired
                                                             appliances certified with draft hoods or diverters. Type BW Gas Vents are intended for the venting of flue gases
                                                             from gas-fired wall furnaces and the maximum input to a Type Bw Gas Vent is determined by the maximum
                                                             input of the vented wall furnace to which the type BW Vent is intended to be connected.


CAN/ULC-S609-M89               Standard for Low              These requirements cover the design and construction of Type L Vents which are intended for the venting of flue           91.060.40       $110.00
Amendments 1-4                 Temperature Vents Type L      gases having temperatures not exceeding 300degrees C, from fuel-burning appliances certified for use with                 91.140.30
                                                             Type L Vents. They may also be used where Type B gas vents are used. They are intended for installation in
                                                             buildings to provide an essentially vertical conduit or passageway for conveying flue gases to the outer air from
                                                             the above described class of appliances.


CAN/ULC-S610-M87               Standard for Factory-Built    Part A of these requirements covers factory-built fireplaces capable of utilizing solid fuels commonly used in            91.140.20       $110.00
Amendments 1-6                 Fireplaces                    fireplaces and intended for provision of supplementary heating in buildings. These fireplaces are only intended
                                                             for use with specified factory-built chimneys and associated parts, and are not for use with masonry chimneys.
                                                             Part B of these requirements covers factory-built fireplaces capable of utilizing solid fuels commonly used in
                                                             fireplaces and intended for, but not limited to, use in mobile homes. These fireplaces are only intended for use
                                                             with specified factory-built chimneys and associated parts.


CAN/ULC-S610-M87               Norme sur les foyers à feu    La partie A de ces exigences traite des foyers à feu ouvert préfabriquéspouvant utiliser des combustibles solides         91.140.20       $110.00
Modifications1-6               ouvert préfabriqués           employés couramment dans les foyerscomme source de chaleur d'appoint dans les bâtiments. Ces foyers à feu
                                                             ouvertne peuvent être raccordés qu'à des cheminées préfabriquées et leurs élémentsconnexes spécifiés
                                                             REMARQUE. Ces foyers à feu ouvert ne doivent pas être raccordés à descheminées en maçonnerie.
                                                             La partie B de ces exigences traite des foyers à feu ouvert préfabriquéspouvant utiliser des combustibles solides
                                                             employés couramment dans les foyerset destinés, sans y être limités, aux maisons mobiles. Ces foyers ne
                                                             peuventêtre raccordés qu'à des cheminées préfabriquées et leurs éléments connexesspécifiés.Les foyers à feu
                                                             ouvert décrits dans cette norme doivent pouvoir êtreinstallés conformément aux instructions d'installation du
                                                             fabricant, tel quel'exige la présente norme.




                                                                                                                                                                                                      Page 16 of 39
                                                                                     CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                            AND OTHER RECOGNIZED DOCUMENTS
                                                                                   CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                           ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                              ICS CODE     PRICE (CDN)

CAN/ULC-S612-99         Standard for Hose for          This Standard sets forth requirements for hose for conducting flammable and combustible liquids handled at            23.040.70      $115.00
Amendment 1             Flammable and                  temperatures within the range of -40°C to +50°C, primarily into the fuel storage tank of the end use vehicle.
                        Combustible Liquids
CAN/ULC-S612-99         Norme Sur Les Tuyaux           Cette norme énonce les exigences relatives aux tuyaux flexibles servant àacheminer des liquides inflammables          23.040.70      $115.00
Modification 1          Flexibles Pour Liquides        et combustibles à des températurescomprises entre -40 °C et +50 °C principalement vers les réservoirs de
                        Inflammables et                stockagedes véhicules.
                        Combustibles

ULC-S615-98             Standard for Reinforced        This standard contains requirements that cover reinforced plastic non-pressure tanks that are used for                23.020.10      $130.00
                        Plastic Underground Tanks      underground storage of flammable and combustible liquids such as gasoline, diesel fuel, oxygenated
*SEE also "Technical    for Flammable and              motor fuels, aviation fuel, fuel oil, and lubricating oil. These tanks may be recognized for use with other
Supplements for         Combustible Liquids            products where the tanks have been investigated for such products. These requirements cover tanks
the Refurbishing of                                    of either single or double wall construction. Tanks covered by these requirements are generally
Underground and                                        cylindrical or spherical in shape. Tanks covered by these requirements are fabricated, inspected,
Aboveground Tanks"                                     and tested for leakage and structural strength prior to shipment from the factory as completely
                                                       assembled vessels. These requirements cover tanks where the primary tank may be single or multiple
                                                       compartment. These requirements cover tanks of capacities up to, and including, 250 000 L. The
                                                       requirements of this standard are for the construction of stationary tanks. The installation of these tanks
                                                       may be covered by any of the following documents:
                                                       A National Fire Code of Canada, Part 4;
                                                       B CAN/CSA-B139, Installation Code for Oil Burning Equipment;
                                                       C Environmental Code of Practice for Underground Storage Tank Systems Containing Petroleum
                                                       D Regulations of the appropriate authority having jurisdiction.



ULC-S615-98             Norme sur Les Reservoirs       Ces exigences s'appliquent aux réservoirs en plastique renforcé non pressurisés utilisés pour le stockage             23.020.10      $130.00
                        en Plastique Renforce          souterrain de liquides inflammables et combustibles comme l'essence, le combustible diesel, les combust-
*SEE also "Technical    Souterrains pour Liquides      ibles pour moteur oxygénés, le carburant aviation, le mazout et les lubrifiants. Ces réservoirs peuvent être
Supplements for         Inflammables                   utilisés pour d’autres produits s’ils ont fait l’objet d’une évaluation pertinente. Ces exigences visent les
the Refurbishing of     et Combustibles                réservoirs à simple et à double paroi. Les réservoirs visés sont généralement de forme cylindrique ou
Underground and                                        sphérique. Ces exigences visent les réservoirs fabriqués, inspectés et soumis à des essais d'étanchéité
Aboveground Tanks"                                     et de résistance une fois assemblés, avant leur sortie de l'usine. Ces exigences visent les réservoirs dont
                                                       l’enceinte primaire présente un ou plusieurs compartiments. Ces exigences s'appliquent aux réservoirs
                                                       d'une capacité maximale de 250 000 L.La norme vise la construction des réservoirs fixes. L'installation
                                                       de ces réservoirs peut faire l'objet des documents suivants :
                                                       A Code national de prévention des incendies du Canada, Partie 4 ;
                                                       B CAN/CSA‑B139, Code d'installation des appareils de combustion au mazout ;
                                                       C Code de recommandations techniques pour la protection de l’environnement applicables aux systèmes
                                                       de stockage souterrains de produits pétroliers et de produits apparentés ;
                                                       D Règlements des pouvoirs de réglementation compétents.



ULC-S618-00             Standard for Magnesium         These requirements cover buried sacrificial magnesium and zinc anode and zinc and copper/copper sulphate               31.080        $110.00
                        and Zinc Anodes and Zinc       zinc reference electrodes which are intended for use in the cathodic protection of steel underground tanks            77.120.20
                        and Copper/Copper              which have been coated and installed in accordance with the requirements contained in the Standard for                77.120.60
                        Sulphate Reference             Galvanic Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids,              77.140.90
                        Electrodes                     CAN/ULC-S603.1.


CAN/ULC-S620-99         Hose NozzleValves for          These requirements cover hose nozzle valves that are intended to be used to control the flow of flammable and          23.060        $115.00
                        Flammable and                  combustible liquids.
                        Combustible Liquids

CAN/ULC-S620-99         Norme Sur les Pistolets    Cette norme s'applique aux pistolets conçus pour contrôler le débit desliquides inflammables et combustibles.              23.060        $115.00
                        pour Liquides Inflammables
                        et Combustibles

ULC-S627-00             Standard for Space Heaters This Standard applies to hand-fuelled solid-fuel fired space heaters of the radiant, convection or forced-                27.060.10      $130.00
                        for Use with Solid Fuels   circulating type, intended for residential heating. This Standard applies to space heaters having provision               97.100.30
                                                   for venting directly to the outdoors, outdoor-aired space heaters intended for installation primarily in
                                                   mobile homes, and space heaters utilizing catalytic combustion elements.


ULC-S628-93             Standard for Fireplace         These requirements cover prefabricated inserts for masonry fireplaces designed for burning solid fuels such as        91.140.20      $115.00
Amendment 1             Inserts                        wood and coal. This Standard covers catalytic combustors utilized with inserts. Any appliance which is de-
                                                       signed to vent through the throat of the masonry fireplace shall be considered as being within the scope of
                                                       this Standard. Installation of glass doors to existing masonry fireplaces is not covered by this Standard.

CAN/ULC-S629-M87        Standard for 650°C Factory- Covers requirements for Factory-Built Chimney assemblies which do not require field fabrication. They are for use        91.060.40      $115.00
Amendments 1-4          Built Chimneys              with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue-gas
                                                    temperatures normally do not exceed 650 degrees C.


ULC-S630-00             Shop Fabricated Steel          These requirements cover single and double wall cylindrical vertical steel non-pressure tanks that are used for the   23.020.10      $130.00
                        Aboveground Vertical           aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products       75.200
*SEE also "Technical    Tanks for Flammable and        with a relative density not greater than 1.0.
Supplements for         Combustible Liquids
the Refurbishing of
Underground and
Aboveground Tanks"

ULC-S631-05 EN          Standard for Isolating         Covers the requirements for low profile nylon isolating bushings with internal and external threads and               29.080.20,     $115.00
                        Bushing for Steel              component thread sealant which are intended for use in the external corrosion protection of underground               23.040.50
                        Undeground Tanks               steel tanks which have been installed in accordance with requirements contained in the Standard for
                        Protected with Ecternal        External Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible
                        Corrosion Protection           Liquids, CAN/ULC-S603.1.
                        Systems


ULC-S631-05 FR          Manchons isolants pour         Ces exigences visent les manchons isolants en nylon à bas profil à filetages intérieurs et extérieurs et à produit    29.080.20,     $115.00
                        réservoirs enterres en acier   d’étanchéité de filets d’éléments destinés à un usage dans la protection contre la corrosion extérieure des           23.040.50
                        protéges par des systèmes      réservoirs enterrés en acier qui ont été installés conformément aux exigences contenues dans la norme
                        de protection contre la        CAN/ULC‑S603.1, Systèmes de protection contre la corrosion extérieure des réservoirs enterrés en acier
                        corrosion extérieure           pour les liquides inflammables et combustibles.

ULC-S632-99             Standard for Heat Shields      These requirements cover the construction and performance of heat shields for vertical installation between heat      91.060.40      $110.00
                                                       producing appliances, chimney connectors and combustible construction. Heat shields are intended for
                                                       attachment to combustible construction for the reduction of specified minimum clearances for heat producing
                                                       appliances. Heat shields are rated on a percentage basis, i.e. a 50% rated heat shield is considered suitable
                                                       for the reduction of required clearances by 50%.




                                                                                                                                                                                           Page 17 of 39
                                                                                      CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                             AND OTHER RECOGNIZED DOCUMENTS
                                                                                    CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                            ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.      TITLE                        ABSTRACT                                                                                                                ICS CODE    PRICE (CDN)

CAN/ULC-S633-99            Flexible Underground Hose This Standard sets forth requirements for flexible underground hose connectors intended for flammable and                  23.040.60     $115.00
                           Connectors for Flammable combustible liquid service at temperatures within the range of -40°C to +50°C.                                              23.040.70
                           and Combustible Liquids

CAN/ULC-S633-99            Norme Sur les Raccords a     Cette norme énonce les exigences visant les raccords à tuyau flexiblesouterrain devant servir exclusivement au          23.040.60     $115.00
                           Tuyaux Flexible Souterrain   transfer de liquides inflammables etcombustibles à des températures comprises entre -40 °C et +50 °C.                   23.040.70
                           pour Liquids Inflammables
                           et Combustibles

CAN/ULC-S634-99            Hose Swivel Connectors for These requirements cover hose swivel connectors intended only for flammable and combustible liquid service                23.040.60     $115.00
Amendment 1                Flammable and              excluding high aromatic or high alcohol content gasolines.
                           Combustible Liquids
                                                      A hose swivel connector is intended for use with dispensing devices to facilitate handling of the hose nozzle
                                                      valve and/or hose without subjecting the hose to twisting or torsional stress.

ULC-S635-00                Standard for Lining          This Standard covers lining systems for existing masonry chimneys, which may or may not incorporate a liner of          91.060.40     $130.00
                           Systems for Existing         fire-clay tile, or factory-built chimneys and vents. Lining systems as covered by these requirements are not
                           Masonry or Factory-Built     intended for use with Type BH Gas Vents, or with appliances that create positive pressures within the lining
                           Chimneys and Vents           system, or cause condensation of corrosive acids.

ULC-S636-95                Standard for Type BH Gas     These requirements cover the design, construction, and performance of gas venting systems intended for                  27.060.20     $130.00
Amendment 1                Venting Systems              negative or positive pressure venting of gas-fired appliances producing flue gases having the following                 91.140.20
                                                        temperatures: Class I venting systems are suitable for gas-fired appliances producing flue gas temperatures             91.140.30
                                                        of more than 135°C but not more than 245°C; and Class II venting systems are suitable for gas-fired
                                                        appliances producing flue gas temperatures of 135°C or less.

CAN/ULC-S639-M87           Norme relative aux           Les présentes exigences s'appliquent aux chemisages en acier préfabriqués quicomprennent un registre de                 91.140.20     $110.00
Modifications 1-2          chimisages en acier pour     tirage, un avaloir et les accessoires connexes destinés aux foyers à feu ouvert en maçonnerie. Ces
                           foyers à feu ouvert en       chemisages constituent une construction qui peut remplacer les chemisages classiques en briques
                           maçonnerie à combustibles    réfractaires et les registres en métal. L'installation des chemisages en acier décrits dans la présente norme
                           solides                      doits'effectuer en suivant les exigences des codes du bâtiment qui s'appliquent etles instructions du fabricant.
                                                        Remarque:Les présentes exigences ne s'appliquent pas aux foyers à feu ouvert préfabriqués, aux foyers à
                                                        feu ouvert encastrables ou aux poêles.




CAN/ULC-S639-M87           Standard for Steel Liner     These requirements cover prefabricated steel liner assemblies incorporating a flue damper, smoke chamber and            91.140.20     $110.00
Amendments 1-2             Assemblies for Solid-Fuel    associated accessories for masonry fireplaces intended as an alternate form of construction to conventional fire
                           Burning Masonry              brick liners and metal dampers. These requirements do not cover factory-built fireplaces, inserts or space heaters.
                           Fireplaces


CAN/ULC-S640-M91           Standard for Lining          These requirements cover lining systems for new masonry chimneys.                                                       91.060.40     $110.00
Amendments 1-3             Systems for New Masonry
                           Chimneys
ULC-S641-00                Standard for Factory-Built   These requirements apply to factory-built chimney connectors and wall pass-through assemblies that do not               91.060.40     $115.00
                           Chimney Connectors and       require field fabrication. They are for use with gas, liquid and solid-fuel-fired residential appliances and building
                           Wall Pass-Through            heating equipment where the flue-gas temperatures do not normally exceed 650ºC. Factory-built chimney
                           Assemblies                   connectors are intended for use inside buildings to form a connection from an appliance to a factory-built
                                                        chimney suitable for use with solid fuel, or to a masonry chimney.


CAN/ULC-S642-M87 (R2000)   Compounds and Tape for       This Standard is for the determination of the acceptability of pipe joint compounds and tapes for piping systems        23.040.80     $110.00
Amendment 1                Threaded Pipe Joints         intended for the containment of alcohol, gasohol, natural gas and methane, oxygen, petroleum distillates,
                                                        propane and butane, steam, and water (potable and non-potable). This standard also provides for the
                                                        determination of the flash point and ignition temperatures, and evidence of spontaneous heating, of pipe
                                                        joint compounds.

ULC-S643-00                Shop Fabricated Steel        These requirements cover single and double wall cylindrical horizontal steel non-pressure tanks that are used for       23.020.10     $130.00
                           Aboveground Utility Tanks    the aboveground storage of flammable and combustible liquids with a relative density not greater than 1.0,
                           for Flammable and            such as gasoline, fuel oil, or similar products.
                           Combustible Liquids
ULC-S644-00                Emergency Breakaway          These requirements cover emergency breakaway fittings intended only for flammable and combustible liquid                23.040.60     $115.00
                           Fitting for Flammable and    service including gasoline with up to 15% ethanol.
                           Combustible Liquids
ULC-S645-1993              Standard For Power Roof      These ventilators are for use with exhaust systems serving restaurant type cooking                                      97.040.20     $130.00
Amendments 1-2             Ventilators for Commercial   equipment such as ranges, broilers, deep fat fryers, grilles, etc. They are complete                                     23.120
                           and Institutional Kitchen    units which may including a fan, motor, enclosing housing, roof penetration and duct
                           Exhaust Systems              connection flange, intended for use in exhaust systems incorporating exhaust
                                                        hoods and are designed to safely remove residual exhaust vapours and airborne
                                                        particles from the cooking area and discharge these exhaust products at a minimum
                                                        height of 1000 mm above roof level.

ULC-S646-06                Standard for Exhaust         These requirements cover exhaust hoods for commercial and institutional                                                 97.040.20     $130.00
                           Hoods and Related            kitchens and are intended for placement over restaurant‑type cooking
                           Controls for Commercial      equipment, such as ranges, broilers, deep‑fat fryers, grills, etc. They may
                           and Institutional Kitchens   be of the shelf, canopy, island, double island or equipment mounted styles
                                                        and may be known as grease extractor type, or filter type hoods. They may
                                                        include provisions for the introduction of make-up air to the kitchen. They may
                                                        include provisions to limit exhaust temperatures to 190°C.Exhaust hoods covered
                                                        by these requirements are intended for installation in accordance with the Standard
                                                        for Ventilation Control and Fire Protection of Commercial Cooking Operations,
                                                        NFPA 96. These requirements cover equipment rated not over 600 V and intended
                                                        for installation under the requirements of the Canadian Electrical Code, Part I.

ULC-S647-05                Standard for Exhaust         This Standard applies to exhaust cleaning assemblies intended primarily for use with                                     23.120       $130.00
Amendment 1                Cleaning and Recirculation   exhaust systems for commercial and institutional type cooking equipment such as                                         97.040.20
                           Assemblies for Commercial    ranges, broilers, deep fat fryers, grills, etc... that are Gas-Fuelled and Electronically-                              13.040.30
                           and Institutional Kitchen    Fuelled. They are complete units typically including filter box, filters, odour removal
                           Exhaust Systems              media, fire damper, fan box, fan and motor controls and control panel. The units are
                                                        located downstream from grease extractors or hood and filter assemblies and may be
                                                        floor mounted, suspended in a ceiling space or roof mounted.This Standard also
                                                        applies to exhaust recirculation units that are for connection to the outlet from air
                                                        cleaning assemblies and are intended to temper make-up air by recycling up to 80%
                                                        of the clean exhaust air to the kitchen area. The remaining make-up air is drawn from
                                                        outside of the building or from areas adjoining the kitchen. The scope of this Standard
                                                        does not include the evaluation of air quality when these units are used in conjunction
                                                        with gas or solid fuel-fired appliances.




                                                                                                                                                                                             Page 18 of 39
                                                                                     CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                            AND OTHER RECOGNIZED DOCUMENTS
                                                                                   CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                           ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                               ICS CODE    PRICE (CDN)

ULC-S649-06             Standard for Grease Filters    This Standard applies to grease filters for installation in collection hoods                                           97.040.20     $130.00
                        for Commercial and             of commercial kitchen exhaust systems for conformance with NFPA 96
                        Insitutional Kitchen Exhaust   requirements. Grease filters are investigated to determine their abilities to:
                        Systems                        A Remove atomized grease from the airstream;
                                                       B Limit the projection of flames downstream when attacked by flame on the
                                                          upstream face, after exposure to grease-laden air;
                                                       C Drain off the collected grease in such a manner that it will not drip off the
                                                          surface or pose a risk of fire; and
                                                       D Have the structural integrity necessary for rough field handling, cleaning
                                                          and maintenance

ULC-S650-01             Standard for the installation This Standard applies to the minimum requirements for the installation and                                              13.220.20     $130.00
                        and performance of            operating performance of ventilation and fire suppression systems for                                                   91.140.30
                        ventilation and fire          commercial, industrial, institutional or similar cooking applications.                                                  97.040.20
                        suppression systems for
                        commercial and institutional
                        cooking equipment

ULC-S651-00             Emergency Valves for           Covers emergency valves that are intended to be used for the control of flammable and combustible liquids.              13.220       $115.00
                        Flammable and                  They are of the type used in the assembly of motor fuel dispensing equipment and associated piping systems.             23.060
                        Combustible Liquids            Valves covered by this Standard are for use with flammable and combustible liquids which are handled at
                                                       temperatures within the range of -40 degrees C to +50 degrees C.



ULC-S652-93 (R2000)     Standard For Tank              These requirements cover the adaptation of tank assemblies of the non-pressure type and constructed in                 23.020.10     $115.00
Amendment 1             Assemblies For Collection      accordance with the basic requirements of one of the following Standards:
                        Of Fuel Oil                    A. ULC-S601 - Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable and
                                                       Combustible
                                                       Liquids;
                                                       B. CAN/ULC-S602 - Standard for Aboveground Steel Tanks for Fuel Oil and Lubricating Oil;
                                                       C. CAN/ULC-S603 - Standard for Steel Underground Tanks for Flammable and Combustible Liquids;
                                                       D. CAN/ULC-S603.1 - Standard for Galvanic Corrosion Protection Systems for Steel Underground Tanks for
                                                       Flammable and Combustible Liquids;
ULC-S653-94             Standard for Aboveground       These requirements cover steel contained tank assemblies that are used for aboveground storage of flammable            23.020.10     $115.00
Amendment 1             Steel Contained Tank           liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater      75.20
                        Assemblies for Flammable       than 1.0.
                        and Combustible Liquids

ULC-S655-98             Standard for Aboveground       These requirements cover shop fabricated aboveground protected tank assemblies that are used for the storage           23.020.10     $115.00
                        Protected Tank Assemblies      of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a specific gravity
                        for Flammable and              not greater than 1.0. These protected tank assemblies consist of primary tanks provided with secondary
                        Combustable Liquids            containment and protective encasement. These protected tank assemblies are intended for stationary installation
                                                       and use in accordance with the following documents
                                                       :A National Fire Code of Canada, Part 4;
                                                       B CAN/CSA-B139, Installation Code for Oil Burning Equipment;
                                                       C The Environmental Code of Practice for Aboveground Storage Tank Systems Containing Petroleum Products;
                                                       and
                                                       D The Requirements of the authority having jurisdiction.
                                                       These requirements and tests shall not be construed as having determined suitability for use of a protected
                                                       tank assembly after fire exposure, or impact by vehicles, or small arms attack.


CAN/ULC-S656-00         Standard for Oil-Water         These requirements cover shop fabricated single or double wall oil-water separators intended to collect and             13.060       $130.00
                        Separators                     separate free oil from water to the degree as determined by the requirements herein at an inlet concentration          23.020.99
                                                       not exceeding 2 000 mg/L. These separators shall also capture and contain oil spills under dry weather con-            75.180.99
                                                       ditions up to the free oil containment capacity of the separator.

CAN/ULC-S656-00         Norme sur Les Separateurs Les exigences qui suivent portent sur les séparateurs huile-eau préfabriqués à paroisimple ou double servant à               13.060       $130.00
                        Huile-Eau                 collecter l'huile libre de l'eau dans la mesure précisée par lesprésentes exigences, c'est-à-dire à une concentra-          23.020.99
                                                  tion n'excédant pas 2000 mg/L dans le tuyau d'admission. Ces séparateurs doivent également pouvoir contenir                 75.180.99
                                                  les déversementsd'hydrocarbures se produisant par temps sec et capturer des quantités déversées selon la
                                                  capacité de retenue d'huile libre du séparateur.Remarque : La référence à chaque méthode d'essai exigée est
                                                  indiquée dans la marge de droitepar les lettres ME suivies du numéro de l'article ou du paragraphe entre
                                                  parenthèse.


CAN/ULC-S701-05         Standard for Thermal           This Standard specifies the requirements for factory made rigid expanded polystyrene insulation in the form of          27.220       $170.00
                        Insulation, Polystyrene,       pipe covering and boards with or without facings or coatings made by moulding (EPS) or extrusion (XPS) of              91.120.10
                        Boards and Pipe Covering       expandable polystyrene beads. This Standard does not apply to laminated products manufactured with any
                                                       type of rigid board facer including fibreboard, perlite board, gypsum board, or oriented strand board.

CAN/ULC-S701-05         Norme sur l'isolant            Cette norme énonce des exigences visant l'isolant en polystyrène expansé rigide sous forme de panneaux et de            27.220       $170.00
                        thermique en polystyrène,      revêtements de tuyauterie fabriqué en usine, avec ou sans surfaçage et obtenu par moulage (EPS) ou extrusion           91.120.10
                        panneaux et revêtements        (XPS) de grains de polystyrène expansible. Cette norme ne vise pas les produits contrecollés sur lesquels est
                        de tuyauterie                  apposé un surfaçage rigide quelconque comme le carton, les panneaux de perlite, le placôplatre ou les
                                                       panneaux de particules orientés.

CAN/ULC-S702-97         Standard for Thermal         This standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts,           91.120.10     $130.00
                        Insulation Mineral Fibre for rolls, boards and sheets. It also applies to loose fill mineral fibre thermal insulation when used in unconfined
                        Buildings                    spaces with slopes not exceeding 4.5:12.


CAN/ULC-S702-97         Norme sur l'isolant            La présente norme s'applique à l'isolant thermique de fibres minéralesfabriqué sous forme de matelas, de               91.120.10     $130.00
                        thermique de fibres            rouleaux, de panneaux et de feuilles avec ousans surfaçage. Le surfaçage, le cas échéant, doit être soit
                        minérales pour bâtiments       une membraneperméable à l'air, soit une membrane pare-vapeur conformément au tableau 1 pourles
                                                       types 2 et 3 respectivement. Toutefois, les matelas et les rouleaux nedoivent pas avoir un surfaçage de
                                                       papier kraft. La norme vise égalementl'isolant thermique de fibres minérales en vrac lorsque ce dernier est
                                                       utilisédans des espaces dissimulés dont la pente ne dépassse pas 4.5:12.

ULC-S702.2-03           Mineral Fibre Thermal          These Guidelines specify the requirements for installation of mineral fibre thermal insulation products for            91.120.10     $130.00
                        Insulation for Buildings,      buildings, such that a product manufactured and packaged according to CAN/ULC-S702 will provide the                    91.100.15
                        Part 2: Application            properties declared by the manufacturer, when installed. These Guidelines specify requirements primarily
                        Guidelines                     for the application of products in new construction but may be used in building retrofit or renovation
                                                       applications.


CAN/ULC-S703-01         Standard for Cellulose         This Standard specifies requirements for treated wood-based cellulose fibre intended for use as thermal                91.120.10     $160.00
Amendment 1             Fibre Insulation (CFI) for     insulation (cellulose fibre insulation, CFI) in new and existing buildings within the temperature range of -60°C to     03.120
                        Buildings                      90°C.
CAN/ULC-S703-01         Norme sur l'isolant en Fibre Cette norme énonce les exigences visant les fibres de cellulose traitées à base de bois destinées à être utilisées       91.120.10     $160.00
Modification 1          Cellulosique (IFC) pour les comme isolant thermique (isolant en fibre cellulosique ou IFC) dans les immeubles x ou existants à des                     03.120
                        bâtiments                    températures variant entre –60 °C et 90 °C.



                                                                                                                                                                                           Page 19 of 39
                                                                                          CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                 AND OTHER RECOGNIZED DOCUMENTS
                                                                                        CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.         TITLE                         ABSTRACT                                                                                                                   ICS CODE    PRICE (CDN)

CAN/ULC-S704-03               Standard for Thermal          This Standard covers requirements and test methods for closed cell polyurethane and polyisocyanurate foam                  91.120.10     $180.00
                              Insulation, Polyurethane      thermal insulation in the form of flat rigid boards covered on both sides with a facing material and primarily
                              and Polyisocyanurate          intended for use in applications where the continuous use temperature is within the range -60 oC to +93oC.
                              Boards, Faced                 These rigid boards are not intended to be used as structural panels. The Standard covers products made
                                                            with various facing materials, which impact some physical characteristics. Products manufactured to this
                                                            Standard are intended for use as thermal insulation in building construction. This Standard covers only pro-
                                                            ducts in which the facing material has been bonded to the foam core in the original foam manufacturing
                                                            process. This Standard does not apply to product made using fibreboard, perlite board, gypsum board,
                                                            oriented strandboard, or any other rigid board, on one or both sides.

CAN/ULC-S704-03               Norme sur l'isolant           La présente norme porte sur les exigences et les méthodes d'essai des isolants thermiques de mousse cellulaire             91.120.10     $180.00
                              thermique en polyuréthane     polyuréthane et de mousse de polyisocyanurate sous forme de panneaux plats rigides dont les deux faces sont
                              et en polyiscoyanuarate:      couvertes d'un revêtement. Il s'agit de panneaux destinés principalement à être utilisés dans des endroits où la
                              panneaus revêtus              température se situe entre –60 oC et +93 oC. Ces panneaux rigides ne doivent pas servir de panneaux porteurs.
                                                            La présente norme vise des produits fabriqués de différents revêtements, qui ont une incidence sur certaines
                                                            propriétés physiques. Les produits fabriqués conformément à la présente norme serviront d'isolants thermiques
                                                            dans la construction de bâtiments. La présente norme ne vise que les produits dont le revêtement a été collé
                                                            sur le centre de la mousse au cours de la fabrication initiale de la mousse. La présente norme ne s'applique
                                                            pas aux produits utilisant le panneau de fibres, le panneau de perlite, la plaque de plâtre, le panneau à copeaux
                                                            orientés ou tout autre panneau rigide, sur une face ou sur les deux.

CAN/ULC-S705.1-01             Standard for Thermal          This Standard provides the requirements and test methods for spray-applied rigid polyurethane cellular plastics,           91.120.10     $160.00
Amendment 2                   Insulation - Spray Applied    medium density, used as a thermal insulation for both building and non-building applications, whether applied
                              Rigid Polyurethane Foam,      on a building site or in a prefabrication (manufacturing) facility. The material is also known as foamed in-situ
                              Medium Density - Material -   insulation. The test methods used to determine the material properties provide a means of comparing different
                              Specification                 cellular plastic thermal insulations. They are intended for use in specifications, product evaluations and quality
                                                            control. They are not intended to predict end-use product performance. The testing and evaluation of a product
                                                            against this Standard may require the use of materials and/or equipment that could be hazardous. This
                                                            document does not purport to address all the safety aspects associated with its use. Anyone using this
                                                            Standard has the responsibility to consult the appropriate authorities and to establish appropriate health and
                                                            safety practices in conjunction with any existing applicable regulatory requirements prior to its use.



CAN/ULC-S705.1-01             Norme sur l`isolant           Cette norme énonce les exigences et les méthodes d'essai relatives à l'isolant thermique en plastique alvéolaire           91.120.10     $160.00
Modification 2                thermique en mousse de        rigide de polyuréthane pulvérisé, de densité moyenne, utilisé dans le secteur du bâtiment et dans des secteurs
                              polyuréthane rigide           autres que celui du bâtiment, que ce soit sur le chantier ou dans une usine de préfabrication. On appelle
                              pulvérisée, de densité        également ce matériau isolant poreux coulé sur place. Les méthodes d'essai utilisées pour établir les propriétés
                              moyenne :spécifications       des matériaux permettent de comparer divers isolants thermiques en plastique alvéolaire. Ces méthodes doivent
                              relatives aux matériaux       être utilisées dans les spécifications, les évaluations de produit et le contrôle de la qualité. Elles ne visent pas
                                                            à prédire le rendement du produit fini. La mise à l'essai et l'évaluation d'un produit selon cette norme peuvent
                                                            nécessiter l'emploi de matériaux ou d'appareils susceptibles d'être dangereux. Ce document n'entend pas traiter
                                                            de tous les aspects liés à la sécurité de son utilisation. Il appartient à l'utilisateur de la norme de se renseigner
                                                            auprès des autorités compétentes et d'adopter des pratiques d'hygiène et de sécurité conformes aux règlements
                                                            en vigueur avant de l'utiliser.
CAN/ULC-S705.2-05             Standard for Thermal          This Standard outlines requirements for the installation of spray applied rigid polyurethane foam, medium density.         91.120.10     $150.00
                              Insulation – Spray Applied    The material can be installed as thermal insulation, air barrier, vapour barrier or any combination of these three          03.120
                              Rigid Polyurethane Foam,      applications. The application requirements are for the installation of spray applied rigid polyurethane cellular plastic
                              Medium Density –              whether applied on a building site or in a prefabrication (manufacturing) facility. This Standard may be used for
                              Application                   non-building applications when agreed to by the supplier and the purchaser. These requirements include
                                                            obligations for the manufacturer (or supplier), the contractor and the installer. These requirements include the
                                                            selection of chemical components, application requirements, quality control and documentation of the application,
                                                            limitations for the application and requirements for safety and for disposal of associated waste material and
                                                            packaging. Spray application of spray polyurethane foam, medium density according to this Standard requires the
                                                            use of materials and/or equipment that could be hazardous. Anyone using this Standard has the responsibility to
                                                            consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any
                                                            existing applicable regulatory requirements prior to its use.



CAN/ULC-S705.2-05             Norme sur l'isolant           La présente norme indique les exigences relatives à l'installation de mousse de polyuréthane rigide pulvérisée, de         91.120.10     $150.00
                              thermique en mousse de        densité moyenne. Ce matériau peut être installé comme isolant thermique, pare-vent, pare-vapeur ou toute                    03.120
                              polyuréthane rigide           combinaison de ces trois applications. Les exigences en matière d'application visent l'installation de plastique
                              pulvérisée, de densité        alvéolaire de polyuréthane rigide pulvérisé, qu'il soit appliqué dans un chantier de construction ou dans une usine
                              moyenne – Application         de préfabrication. Le fournisseur et l'acheteur peuvent convenir d'utiliser la présente norme dans le cas
                                                            d'applications non liées à la construction. Ces exigences comportent des obligations pour le fabricant (ou le
                                                            fournisseur), l'entrepreneur et l'installateur. Ces exigences comprennent le choix des composants chimiques, les
                                                            exigences en matière d'application, le contrôle de la qualité et la documentation de l'application, les restrictions
                                                            relatives à l'application et les exigences en matières de sécurité et d'élimination des matières-déchets et des
                                                            emballages s'y rattachant. La pulvérisation de mousse de polyuréthane rigide de densité moyenne conformément
                                                            à cette norme exige l'utilisation de matériaux et de matériel qui pourraient être dangereux. Toute personne utilisant
                                                            la présente norme a la responsabilité de consulter les autorités compétentes et d'établir, avant son utilisation, des
                                                            pratiques de santé et de sécurité appropriées tenant compte des exigences réglementaires applicables déjà
                                                            existantes.
CAN/ULC-S706-02 (Supersedes   Standard for Wood Fibre       This Standard contains requirements and test methods for wood fibre thermal insulation manufactured in the                 79.060.20     $130.00
CAN/CSA-A247-M86)             Thermal Insulation for        form of faced or unfaced panels                       .
                              Buildings                     The Standard covers four types of wood fibre insulation on the basis of their material properties.
                                                            (a) Type I - Preformed insulation in the form of boards, sheets, or panels without a facer or coating
                                                            (b) Type II - Preformed insulation in the form of boards, sheets, or panels with a facer or coating.
                                                            (c) Type III - Preformed insulation in the form of boards, sheets, or panels with a facer or coating with air leakage
                                                            properties of 0,02 L/(s·m2) or less.
                                                            (d) Type IV - Preformed insulation in the form of boards, sheets, or panels with a facer or coating with water
                                                            vapour permeance of 45 Ng/(Pa·s·m2) or less.

CAN/ULC-S706-02               Norme sur l’isolant           Cette norme décrit les exigences et les méthodes d'essais visant l'isolant thermique en fibre de bois en                   79.060.20     $130.00
                              thermique en fibre de bois    panneaux revêtus ou non. La norme vise quatre types d'isolant en fibre de bois définis suivant les
                              pour bâtiments                caractéristiques du matériau constitutif.

                                                            a) Type I - Matériau isolant préformé en planches, feuilles ou panneaux non revetus.
                                                            b) Type II - Matériau isolant préformé en planches, feuilles ou panneaux revêtus.
                                                            c) Type III - Matériau isolant préformé en planches, feuilles ou panneaux revêtus laissant passer l'air à raison de
                                                            0.02
                                                            L/(s•m²) ou moins.
                                                            d) Type IV - Matériau isolant préformé en planches, feuilles ou panneaux revêtus ayant une permeance à la
                                                             vapeur d'eau de 45 ng/(Pa•s•m²) ou moins.




                                                                                                                                                                                                    Page 20 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                          ABSTRACT                                                                                                            ICS CODE     PRICE (CDN)

CAN/ULC-S710.1-05       Standard for Thermal           This Standard specifies the requirements and test methods for bead-applied one component polyurethane foam          91.100.50,     $170.00
                        Insulation - Bead - Applied    used as an insulating air sealant for both building and non-building applications. This Standard covers bead-       91.120.10
                        One Component                  applied one-component polyurethane air sealant foam whether applied on a building site or in a prefabrication
                        Polyurethane Air Sealant       (manufacturing) process. The one-component polyurethane foam is factory pre-packaged. Bead-applied one
                        Foam, Part 1: Material         component polyurethane foam shall not be used when the continuous service temperature is outside the range
                        Specification                  of –60 to +110ºC. One component polyurethane air sealant foam shall be installed in accordance with the
                                                       manufacturer’s instructions and CAN/ULC S710.2, Standard for Thermal Insulation – Bead-Applied One
                                                       Component Polyurethane Air Sealant Foam - Part 2: Installation.


CAN/ULC-S710.1-05       Norme sur l’isolant            La présente norme spécifie les exigences et les méthodes d'essai pour la mousse de polyuréthane                     91.100.50,     $170.00
                        thermique – mousse             monocomposant appliquée en cordon utilisée comme isolant étanche à l’air dans les secteurs du                       91.120.10
                        d’étanchéité à l’air de        bâtiment et autres que celui du bâtiment. La présente norme couvre la mousse d'étanchéité à l'air de
                        polyuréthane                   polyuréthane monocomposant appliquée en cordon, formée in situ ou lors du processus de
                        monocomposant appliquée        préfabrication (en usine). La mousse de polyuréthane monocomposant est préemballée en usine.La
                        en cordon, partie 1 :          mousse de polyuréthane monocomposant appliquée en cordon ne doit pas être utilisée dans les
                        spécifications relatives au    endroits où la température de service continu ne se situe pas entre -60 et +110 ºC. La mousse
                        matériau                       d'étanchéité à l'air de polyuréthane monocomposant doit être installée conformément aux directives
                                                       du fabricant et à la norme CAN/ULC S710.2, Norme sur l'isolant thermique – mousse d'étanchéité
                                                       à l'air de polyuréthane monocomposant appliquée en cordon - Partie 2 : Installation.



CAN/ULC-S710.2-05       Standard for Thermal           This Standard outlines requirements for the installation of bead-applied one component                              91.100.50,     $170.00
                        Insulation – Bead-Applied      polyurethane foam used as an insulating air sealant for both building and non-building                              91.120.10
                        One Component                  applications. The material is installed as air sealant foam in holes, cracks or gaps in
                        Polyurethane Air Sealant       buildings or in a prefabrication (manufacturing) process. The one-component polyurethane
                        Foam – Part 2: Installation    foam is factory pre-packaged. These are requirements for the manufacturer and the installer.
                                                       Bead-applied one component polyurethane foam shall not be used when the continuous
                                                       service temperature is outside the range of –60 to +110ºC. These requirements include the
                                                       proper selection of the air sealant foam, installation requirements, limitations for the
                                                        installation and recommendations for safety and for disposal of associated waste
                                                       material and packaging.

CAN/ULC-S710.2-05       Norme sur l'isolant            La présente norme spécifie les exigences relatives à l'installation de mousse de polyuréthane monocomposant         91.100.50,     $170.00
                        technique – mousse             ppliquée en cordon utilisée comme isolant étanche à l'air dans les secteurs du bâtiment et autres que celui du      91.120.10
                        d'étanchéité à l'air de        bâtiment. Le matériau est installé comme mousse d'étanchéité à l'air pour combler les trous, les fissures ou
                        polyuréthane                   les espaces de joint, dans la construction d'édifices ou lors du processus de préfabrication (en usine). La
                        monocomposant appliquée        mousse d'étanchéité de polyuréthane monocomposant est préemballée en usine. Les présentes exigences
                        en cordon, partie 2 :          s'adressent à la fois au fabricant et à l'installateur. La mousse de polyuréthane monocomposant appliquée
                        Installation                   en cordon ne doit pas être utilisée dans les endroits où la température de service continu ne se situe pas
                                                       entre -60 et +110 ºC. Les présentes exigences comprennent des indications permettant de choisir la mousse
                                                       d'étanchéité à l'air appropriée, des exigences et des restrictions d'installation, des recommandations en matière
                                                       de sécurité et d'élimination des déchets connexes et les exigences d'emballage.


CAN/ULC-S711.1-05       Standard for Thermal           This Standard specifies the requirements and test methods for thermal insulating bead - applied two-component       91.100.50,     $170.00
                        Insulation - Bead-Applied      polyurethane foam used as an insulating air sealant for both building and non-building applications. This           91.120.10
                        Two Component                  Standard covers bead-applied two-component polyurethane air sealant foam whether applied on a building site
                        Polyurethane Air Sealant       or in a prefabrication (manufacturing) process. This two-component polyurethane air sealant foam is factory
                        Foam Part 1: Material          pre-packaged.Bead-applied two component polyurethane foam shall not be used when the continuous service
                        Specification                  temperature is outside the range of -60 to +110ºC. The test methods used to determine the material properties
                                                       provide a means of comparing different polyurethane air sealant foams. They are intended for use in
                                                       specifications, product evaluations and quality control. Bead-applied two component polyurethane air sealant
                                                       foam shall be installed in accordance with the manufacturer’s instructions and CAN/ULC S711.2 Thermal
                                                       Insulation –Bead-Applied Two Component Polyurethane Air Sealant Foam – Part 2: Installation.



CAN/ULC-S711.1-05       Norme sur l’isolation          La présente norme spécifie les exigences et les méthodes d'essai pour la mousse de polyuréthane bicomposant         91.100.50,     $170.00
                        technique – norme sur          appliquée en cordon utilisée comme isolant étanche à l’air dans les secteurs du bâtiment et autres que celui du     91.120.10
                        l'isolant thermique –          bâtiment. La présente norme couvre la mousse d'étanchéité à l'air de polyuréthane bicomposant appliquée en
                        mousse d’étanchéité à l’air    cordon, formée in situ ou lors du processus de préfabrication (en usine). La mousse de polyuréthane
                        de polyuréthane                d'étanchéité à l’air bicomposant est préemballée en usine. La mousse de polyuréthane bicomposant appliquée
                        bicomposant appliquée en       en cordon ne doit pas être utilisée dans les endroits où la température de service continu ne se situe pas
                        cordon, partie 1 :             entre -60 et +110 ºC. Les méthodes d’essai utilisées pour établir les propriétés des matériaux permettent de
                        spécifications relatives au    comparer les diverses mousses d’étanchéité à l'air de polyuréthane. Elles doivent être utilisées dans les
                        matériau                       spécifications, les évaluations des produits et les systèmes de contrôle de la qualité. La mousse d'étanchéité
                                                       à l'air de polyuréthane bicomposant appliquée en cordon doit être installée conformément aux instructions
                                                       du fabricant et à la norme CAN/ULC S711.2, Norme sur l'isolant thermique – mousse d'étanchéité à l'air de
                                                       polyuréthane bicomposant appliquée en cordon - Partie 2 : Installation.



CAN/ULC-S711.2-05       Standard for Thermal           This Standard specifies the requirements for the installation of thermal insulating bead-applied two-component      91.100.50,     $170.00
                        Insulation – Bead-Applied      polyurethane foam used as an insulating air sealant (including a component within an air barrier system) for        91.120.10
                        Two Component                  both building and non-building applications. The material is installed as air sealant foam in holes, cracks or
                        Polyurethane Air Sealant       gaps. These are requirements for both the manufacturer and the installer. Bead-applied two component
                        Foam – Part 2: Installation    polyurethane foam shall not be used when the continuous service temperature is outside the range of -60 to
                                                       +110ºC. These requirements include the proper selection of the air sealant foam, installation requirements,
                                                       imitations for the installation, testing, recommendations for safety and recommendations for disposal of
                                                       associated waste material and packaging.


CAN/ULC-S711.2-05       Norme sur l'isolation          La présente norme spécifie les exigences relatives à l'installation de mousse de polyuréthane bicomposant           91.100.50,     $170.00
                        technique - mousse             appliquée en cordon utilisée comme isolant étanche à l'air (y compris un composant dans un système de               91.120.10
                        d'étanchéité à l'air de        pare-air) dans les secteurs du bâtiment et autres que celui du bâtiment. Le matériau est installé comme
                        polyuréthane bicomposant       mousse d'étanchéité à l'air pour combler les trous, les fissures ou les espaces de joint. Les présentes
                        appliquée en cordon - partie   exigences s'adressent à la fois au fabricant et à l'installateur. La mousse de polyuréthane bicomposant
                        2 : installation               appliquée en cordon ne doit pas être utilisée dans les endroits où la température de service continu ne se
                                                       situe pas entre -60 et +110 ºC. Les présentes exigences comprennent des indications permettant de
                                                       choisir la mousse d'étanchéité à l'air appropriée, des exigences et des restrictions d'installations, les
                                                       exigences relatives aux essais, des recommandations en matière de sécurité et d'élimination des déchets
                                                       connexes et les exigences d'emballage.




                                                                                                                                                                                         Page 21 of 39
                                                                                                 CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                        AND OTHER RECOGNIZED DOCUMENTS
                                                                                               CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                       ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.            TITLE                             ABSTRACT                                                                                                               ICS CODE     PRICE (CDN)

CAN/ULC-S770-03                  Standard Test Method for          This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-        91.100.60      $130.00
                                 Determination of Long-term        year storage in a laboratory environment and provides means for its prediction based on an accelerated                 91.120.10
                                 Thermal Resistance of             laboratory test. This procedure, based on ASTM standard test methods C 1303 and C 518, can be applied to
                                 Closed-Cell Thermal               a wide range of preformed as well as field applied insulating foams. This procedure estimates the change
                                 Insulating Foams                  in the thermal resistivity of insulating foam products by means of slicing and scaling. This test procedure
                                                                   is applicable to cellular plastic insulation manufactured with the intent to retain a blowing agent, other than
                                                                   air, for a period longer than 180 days. This procedure specifies reference time, sampling and testing
                                                                   requirements for the application of ASTM standard test method C 1303 to determine LTTR for closed-cell
                                                                   foams such as extruded polystyrene, sprayed polyurethane, and polyisocyanurate.


CAN/ULC-S770-03                  Méthode dèssai normalisée         Selon cette méthode, la résistance thermique à long terme (RTLT) d'une mousse isolante est la valeur mesurée           91.100.60      $130.00
                                 pour la détermination de la       après une période d'entreposage en laboratoire de 5 ans, et elle permet de prévoir la RTLT d'après un essai            91.120.10
                                 résistance thermique à long       de vieillissement accéléré en laboratoire. On peut utiliser cette méthode, basée sur les méthodes d'essai
                                 terme des mousses                 normalisées ASTM C 1303 et C 518, avec une vaste gamme de produits de mousse isolante préformés ou
                                 islolantes cellulaires            appliqués sur place. Elle permet d'évaluer le changement de résistivité thermique de ces produits par des
                                                                   méthodes de découpage et de proportionnalité. On peut également l'utiliser avec des plastiques alvéolaires
                                                                   qui sont conçus pour retenir un agent gonflant, autre que l'air, pendant plus de 180 jours. Cette méthode
                                                                   précise les exigences relatives à la période de référence, à l'échantillonnage et aux essais pour l'application
                                                                   de la méthode d'essai normalisée ASTM C 1303 afin de déterminer la RTLT de mousses cellulaires comme
                                                                   le polystyrène extrudé, le polyuréthane pulvérisé et le polyisocyanurate.



ULC-S771-01                      Template for Thermal              Template for Thermal Insulation Material Standards                                                                     01.140.01      $110.00
                                 Insulation Material                                                                                                                                      91.120.10
                                 Standards
ULC-S772                         Template for Thermal              Template for Thermal Insulation Application Guidelines                                                                 01.140.01      $110.00
                                 Insulation Application                                                                                                                                   91.120.10
                                 Guidelines
CAN/ULC-S773-01                  Standard for Thermal              The main intent of this document is to provide accurate and consistent terms used in the Canadian Thermal              01.140.01      $115.00
                                 Insulation Terminology            Insulation industry. More specifically, the application of the information contained in this Standard is for           91.120.10
                                                                   reference use with the Thermal insulation series of Standards, ULC-S700.
CAN/ULC-S773-01                  Norme sur la terminologie         Le but premier de cette norme est de définir les termes les plus couramment utilisés dans l'industrie de l'isolation   01.140.01      $115.00
                                 de l'isolation thermique          thermique au Canada de façon à en uniformiser l'emploi. Ainsi, les renseignements contenus dans cette norme            91.120.10
                                                                   s'appliquent à la série de normes ULC-S700.


CAN/ULC-S774-03                  Standard Laboratory Guide         This laboratory guide has been developed for the assessment of volatile organic compound emissions from                 19.040        $180.00
                                 for the Determination of          polyurethane foam. It outlines a test procedure for the determination of volatile organic compounds from the           91.120.10
                                 Volatile Organic Compound         foam and explains why certain test conditions have been selected. Upon agreement between the purchaser
                                 Emissions from                    and the manufacturer, this test method may be used for other materials such as thermal insulation products.
                                 Polyurethane Foam                 This laboratory guide specifies recommended procedures for the use of test chambers to evaluate emissions
                                                                   from the insulation product at a point in time following its installation. This laboratory guide is based on
                                                                   ASTM D 5116, which describes a procedure using small-scale environmental chambers to determine volatile
                                                                   organic compound emissions from a variety of materials. The chamber methodology only presents a simple
                                                                   picture of the complex nature and interactions of emissions that may exist in home and work environments.
                                                                   Therefore, the results from these tests cannot fully represent “real life” conditions and they will err on the side
                                                                   of conservatism. However, data from the chamber procedure is useful for identifying potential sources of
                                                                   chemicals that may adversely affect the health of the occupants.



CAN/ULC-S774-03                  Guide standard de                 Le présent guide de laboratoire a été élaboré aux fins de l’évaluation des émissions de composés organiques             19.040        $180.00
                                 composés organiques               volatils de la mousse de polyuréthane. On y trouve la méthode d'essai utilisée pour évaluer les composés               91.120.10
                                 volatils de laboratoire pour      organiques volatils qui se dégagent de la mousse, ainsi que des explications concernant le choix de certaines
                                 l`évaluation des émissions        conditions d’essais. Par accord entre l’acheteur et le fabricant, cette méthode d’essai peut servir dans le cas
                                 de la mousee de                   d’autres matériaux tels que les produits isolants thermiques. On y énonce des méthodes recommandées pour
                                 polyuréthane                      l’utilisation de caissons d’essai dans le but d’évaluer les émissions s’échappant du produit isolant à un moment
                                                                   donné après son installation. Le présent guide de laboratoire est basé sur la norme ASTM D 5116, décrivant
                                                                   une méthode selon laquelle on utilise des petits caissons climatiques pour déterminer les émissions de
                                                                   composés organiques volatils provenant d’une variété de matériaux. Une telle méthodologie ne présente qu’un
                                                                   tableau simplifié de la nature complexe et des interactions des émissions qui peuvent exister à domicile ou au
                                                                   travail. Par conséquent, les résultats de ces essais ne peuvent représenter fidèlement les conditions réelles
                                                                   et il convient alors d'adopter une ligne conservatrice. Les données recueillies des essais effectués dans un
                                                                   caisson climatique sont toutefois utiles pour identifier les sources potentielles de produits chimiques qui
                                                                   pourraient nuire à la santé des occupants.




     CAN/ULC-60743-04            Live Working -                    This international standard applies to the terminology used to describe tools, equipment, devices and methods          29.240.20,     $140.00
      Please note that this      Terminology for Tools,            used in live working. IEC 60500 (651) gives the definitions of all terms used in live working. The present             29.260.99,
     standard is bilingual:      Equipment and Devices             standard permits identification of the tools, equipment and devices and standardizes their names.                        29.260
  English - French/A noter que
    cette norme est bilingue
        français - anglais


     CAN/ULC-60743-04            Travaux sous Tension –            La présente Norme internationale s’applique à la terminologie utilisée pour décrire les outils, le matériel, les       29.240.20,     $140.00
      Please note that this      Terminologie pour                 dispositifs et les méthodes utilisée dans les travaux sous tension. La CEI 60050 (651) contient les définitions        29.260.99,
     standard is bilingual:      L’outillage, le Material et les   de tous les termes utilisés pour les travaux sous tension. La présente norme permet l’identification des                 29.260
  English - French/A noter que   Dispositifs                       outils, du matériel et des dispositifs, et normalise leurs noms.
    cette norme est bilingue
        français - anglais
     CAN/ULC-D60832-99           Insulating poles (Insulating This National Standard of Canada is equivalent to International Standard CEI/IEC 60832: 1988. This Standard is               13.260        $210.00
         Amendment 1             Sticks) and Universal Tool applicable to insulating poles (insulating sticks) and tool attachments (fittings).                                           29.240.20
      Please note that this      Attachments (Fitting) for                                                                                                                                29.260.99
      standard is bilingual:     Live Working
  English - French/A noter que
    cette norme est bilingue
        français - anglais
     CAN/ULC-D60832-99           Perches isolantes et Outils       La présente Norme nationale du Canada est équivalente à la Norme internationaleCEI/IEC 60832: 1988.Cette                13.260        $210.00
         Modification 1          Adaptables pour Travaux           norme est applicable aux perches isolantes etaux outils adaptables.                                                    29.240.20
      Please note that this      sous Tension                                                                                                                                             29.260.99
      standard is bilingual:
  English - French/A noter que
    cette norme est bilingue
        français - anglais


                                                                                                                                                                                                        Page 22 of 39
                                                                                           CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                  AND OTHER RECOGNIZED DOCUMENTS
                                                                                         CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                 ET DES AUTRES DOCUMENTS RECONNUS


   ULC STANDARD NO.            TITLE                         ABSTRACT                                                                                                                  ICS CODE        PRICE (CDN)

   CAN/ULC-D60855-00           Live working -- Insulating  This Standard is applicable to insulating foam-filled tubes and solid rods made of synthetic materials and                   13.260           $130.00
    Please note that this      Foam-Filled Tubes and       intended for tools and equipment for live work on systems operating at voltages above 1 kV.                                 29.240.20
    standard is bilingual:     Solid Rods for Live Working                                                                                                                             29.260.99
English - French/A noter que
  cette norme est bilingue
      français - anglais

   CAN/ULC-D60855-00           Travaux sous tension --       La présente norme est applicable aux tubes isolants remplis de mousse et auxtiges isolantes pleines fabriqués              13.260           $130.00
    Please note that this      Tubes Isolants Remplis de     en matériaux synthétiques et destinés auxoutils et matériels pour travaux sous tension utilisés sur des réseaux           29.240.20
    standard is bilingual:     Mousse et Tiges Isolantes     detension nominale supérieure à 1 kV.                                                                                     29.260.99
English - French/A noter que   Pleines Pour Travaux sous
  cette norme est bilingue     Tension
      français - anglais

   CAN/ULC-60895-04            Live Working – Conductive     This International Standard is applicable to conductive clothing, either assembled from component parts or              13.260, 29.240,     $130.00
    Please note that this      Clothing For Use at           forming a single complete clothing, worn by (electrically) skilled persons during live working (especially                 29.260.99
   standard is bilingual:      Nominal Voltage Up to 800     bare-hand working) at a nominal power system voltage up to 800 kV a.c. and ±600 kV d.c. It is applicable
English - French/A noter que   kV A.C. and ±600 kV D.C.      to conductive jackets, trousers, coveralls (one-piece clothing), gloves or mitts, hoods, shoes, overshoe
  cette norme est bilingue                                   socks and socks.
      français - anglais


   CAN/ULC-60895-04            Travaux xous Tension –        La présente Norme internationale est applicable aux vêtements conducteurs, qu’ils soient constitués de                  13.260, 29.240,     $130.00
    Please note that this      Vetements Conducteurs         plusieurs éléments ou d’une seule pièce, portés par des personnes (électriquement) qualifiées lorsqu'elles                 29.260.99
   standard is bilingual:      pour Usage Jusqu’a 800 kV     travaillent sous tension (en particulier lors du travail au potentiel) pour des tensions nominales allant
English - French/A noter que   de Tension Nominale en        jusqu'à 800 kV en courant alternatif et à ±600 kV en courant continu. Elle est applicable aux vestons,
  cette norme est bilingue     Courant Alternatif et 600    pantalons, combinaisons (d’une seule pièce), aux gants ou moufles, aux cagoules, aux chaussures,
      français - anglais       kV en Courant Continu         aux couvre-chaussures (chausses) et aux chaussettes conducteurs.



   CAN/ULC-D60900-99           Hand Tools for Live           This National Standard of Canada is equivalent to International Standard CEI/IEC 60900: 1987. This standard is             13.260           $240.00
       Amendment 1             Working up to 1000 V a.c.     applicable to insulated and insulating hand tools used for working live or close to live parts at nominal voltages         29.240
    Please note that this      and 1500 V d.c.               up to 1 000 V a.c. and1 500 V d.c. Not included are tools and equipment and material supplied from an external            29.260.99
    standard is bilingual:                                   energy source, insulating rods and poles, used for working at a distance, which are covered by IEC 855.
English - French/A noter que
  cette norme est bilingue
      français - anglais

   CAN/ULC-D60900-99           Outils à Main Pour Travaux    La présente Norme nationale du Canada est équivalente à la Norme internationaleCEI/IEC 60900: 1987.1 La                    13.260           $240.00
       Modification 1          Sous Tension Jusqu'à 1        présente norme est applicable aux outils à main isolés et isolants utiliséssous tension ou à proximité                     29.240
    Please note that this      000 V en Courant Alternatif   d'installations sous tension, de tension nominalejusqu'à 1000 V en courant alternatif et 1 500 V en courant               29.260.99
    standard is bilingual:     et 1 500 V en Courant         continu.Elle n'est pas applicable : - aux outils et aux appareils alimentés par une source extérieure ; - aux
English - French/A noter que   Continu                       perches et tiges isolantes utilisées pour le travail à distance, qui répondent à la CEI 855.
  cette norme est bilingue
      français - anglais

   CAN/ULC-60903-04            Live Working – Gloves of      This International Standard is applicable to: – insulating gloves and mitts which should normally be used in            13.260, 29.240,     $200.00
    Please note that this      Insulating Material           conjunction with leather protector gloves worn over the insulating gloves to provide mechanical protection;                29.260.99
   standard is bilingual:                                    –insulating gloves and mitts usable without over-gloves for mechanical protection. Unless otherwise stated,
English - French/A noter que                                  the use of the term “glove” includes both gloves and mitts. The use of the term “insulating gloves” designates
  cette norme est bilingue                                   gloves providing electrical protection only. The use of the term “composite gloves” designates gloves providing
      français - anglais                                     electrical and mechanical protection.


   CAN/ULC-60903-04            Travaux Sous Tension –        La présente Norme internationale est applicable: - aux gants et moufles isolants, qu’il convient normalement            13.260, 29.240,     $200.00
    Please note that this      Gants en Materiau Isolant     d’utiliser avec un surgant de cuir qui donne la protection mécanique; – aux gants et moufles isolants utilisés             29.260.99
   standard is bilingual:                                    sans surgants protecteurs. Sauf indication contraire, l’utilisation du seul terme «gant» comprend gant et moufle.
English - French/A noter que                                 Le terme «gants isolants» désigne les gants qui fournissent uniquement une protection électrique. Le terme
  cette norme est bilingue                                   «gants composites» désigne les gants fournissant une protection mécanique et électrique.
      français - anglais

   CAN/ULC-D60984-00           Sleeves of Insulating         This standard is applicable to insulating sleeves for the protection of workers from accidental contact with live          13.260           $170.00
    Please note that this      Material for Live Working     electrical conductors, apparatus or circuits.                                                                             29.260.99
    standard is bilingual:
English - French/A noter que
  cette norme est bilingue
      français - anglais

   CAN/ULC-D60984-00           Protège-Bras en Matériaux Cette norme concerne les protège-bras isolants destinés àprotéger les travailleurs contre les contacts                         13.260           $170.00
    Please note that this      Isolants Pour Travaux     accidentels avec des conducteurs,des appareils ou des circuits sous tension.                                                  29.260.99
    standard is bilingual:     Electriques
English - French/A noter que
  cette norme est bilingue
      français - anglais
   CAN/ULC-D61112-01           Blankets of Insulating        This National Standard of Canada is based on International Standard CEI/IEC 61112: 1992 (first edition,                    13.260           $170.00
    Please note that this      Material for Electrical       1992-12) including Corrigendum (dated May 2000).                                                                          29.240.20
    standard is bilingual:     Purposes                      This Standard is applicable to insulating blankets for the protection of workers from accidental contact with live or     29.260.99
English - French/A noter que                                 earthed electrical conductors, apparatus or circuits and avoidance of short circuits on a.c. and d.c. installations.
  cette norme est bilingue                                   Classes
      français - anglais                                     Five classes of blankets, differing in electrical characteristics, are provided and designated as class 0, class 1,
                                                             class 2, class 3, and class 4.
                                                             Categories
                                                             Six categories of blankets different in properties related to acid, oil, ozone, mechanical puncture and a
                                                             combination of oil and ozone are provided and designated categories A, H, Z, M, S respectively, and also
                                                             extreme low temperature designated category C.

   CAN/ULC-D61112-01           Nappes en Matériau Isolant La présente Norme nationale du Canada est basée sur la Norme internationale CEI/IEC 61112: 1992 (première                     13.260           $170.00
    Please note that this      Pour Travaux Electriques   édition, 1992-12) avec Corrigendum (portant les mentions Mai 2000).                                                          29.240.20
    standard is bilingual:                                La présente norme est applicable aux nappes isolantes pour la protection ds travailleurs contre un contact                   29.260.99
English - French/A noter que                              accidental avec des conducteurs électriques sous tension ou mis à la terre, des appareils ou des circuits,
  cette norme est bilingue                                et contre les courts-circuits dans des installations à courant alternatif ou continue.
      français - anglais                                  Classes
                                                          Cinq classes de nappes, de caractéritiques électriques différentes, sont prévues et ont deéignées comme
                                                          suit: classe 0, classe 1, classe 2, classe 3, et classe 4.
                                                          Catégories
                                                          Six catégories de nappes de propriétés différentes par rapport à l'acid, à l'huile, à l'ozone, à la perforation
                                                          mécanique, et à une combinaison de l'huile et de l'ozone sont fournies et désignées respectivement par
                                                          les lettres A, H, Z, M, S; et aussi pour celles résistant aux très basses températures, par la lettre C.




                                                                                                                                                                                                        Page 23 of 39
                                                                                            CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                   AND OTHER RECOGNIZED DOCUMENTS
                                                                                          CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                  ET DES AUTRES DOCUMENTS RECONNUS


   ULC STANDARD NO.            TITLE                          ABSTRACT                                                                                                                   ICS CODE    PRICE (CDN)

   CAN/ULC-D61229-00           Rigid Protective Covers for    This standard is applicable to rigid insulating covers for live working on a.c. installations, including those described    13.260       $185.00
    Please note that this      Live Working on a.c.           in IEC 743.                                                                                                                29.260.99
    standard is bilingual:     Installations
English - French/A noter que
  cette norme est bilingue
      français - anglais



   CAN/ULC-D61229-00           Protecteurs Rigides pour    Cette Norme s'applique aux protecteurs rigides pourtravaux sous tension, en courant alternatif, incluant ceux qui              13.260       $185.00
    Please note that this      Travaux Sous Tension sur sont décritsdans la CEI 743.                                                                                                     29.260.99
    standard is bilingual:     Des Installations à Courant
English - French/A noter que   Alternatif
  cette norme est bilingue
      français - anglais

   CAN/ULC-D61230-99           Live working -- Portable       This National Standard of Canada is equivalent to International Standard CEI/IEC 61230: 1993. This Standard is              13.260       $160.00
        Amendment 1            Equipment for Grounding        applicable to portable equipment, with or without matching fixed connection points, for temporary earthing or              29.240.20
    Please note that this      and Bonding                    earthing and short-circuiting of electrically isolated a.c. transmission and distribution systems, including railway       29.260.99
    standard is bilingual:                                    systems, for the protection of workers.
English - French/A noter que
  cette norme est bilingue
      français - anglais

   CAN/ULC-D61230-99           Travaux sous tension --        La présente Norme nationale du Canada est équivalente à la Norme internationaleCEI/IEC 61230: 1993.Cette                    13.260       $160.00
       Modification 1          Dispositifs Portables Pour     Norme s'applique aux dispositifs portables s'accrochant àun point fixe ou non, pour mise temporaire à la terre             29.240.20
    Please note that this      la Mise à la Terre et la       ou mise à la terre et encourt-circuit des réseaux électriques alternatifs hors tension, de transport et de                 29.260.99
    standard is bilingual:     Continuité des Masses          distribution incluant les réseaux de chemins de fer, et ce, pour laprotection des travailleurs.
English - French/A noter que
  cette norme est bilingue
      français - anglais

   CAN/ULC-D61235-00           Live working -- Insulating     This Standard is applicable to insulating hollow tubes made of synthetic materials and intended for tools and               13.260       $130.00
    Please note that this      Hollow Tubes for Electrical    equipment for work on systems operating at voltages above 1 kV.                                                            29.240.20
    standard is bilingual:     Purposes                                                                                                                                                  29.260.99
English - French/A noter que
  cette norme est bilingue
      français - anglais


   CAN/ULC-D61235-00           Travaux Sous Tension --        Cette norme s'applique aux tubes creux isolants réalisés enmatériaux synthétiques et destinés à la fabrication              13.260       $130.00
    Please note that this      Tubes Creux Isolants Pour      d'outils et de matérielspour travaux sur réseaux de tension de service au-dessus de 1 kV.Des normes                        29.240.20
    standard is bilingual:     Travaux Electriques            techniques particulières séparées donnent le détail des essais desembouts et outils adaptables montés                      29.260.99
English - French/A noter que                                  sur partie terminale ou sur outils complets en tube creux.
  cette norme est bilingue
      français - anglais

   CAN/ULC-D61236-99           Saddles, Pole Clamps           This National Standard of Canada is equivalent to International Standard CEI/IEC 61236: 1993. This                          13.260       $160.00
        Amendment 1            (Stick Clamps) and             International Standard is applicable to saddles and pole clamps (stick clamps) used for live working,                      29.240.20
    Please note that this      Accessories for Live           and to their accessories. It specifies the dimensional and mechanical characteristics to be given                          29.260.99
    standard is bilingual:     Working                        by the manufacturer for each too, the corresponding mechanical tests, and the other points to be
English - French/A noter que                                  checked (visual, functional, marking, etc.).
  cette norme est bilingue
      français - anglais

   CAN/ULC-D61236-99           Selles, manchons et            La présente Norme nationale du Canada est équivalente à la Norme internationale CEI/IEC 61236: 1993.                        13.260       $160.00
       Modification 1          accessoires pour travaux       Domaine d'applicationLa présente Norme internationale est applicable aux selles et manchons utilisés                       29.240.20
    Please note that this      sous tension                   pour les travaux sous tension, ainsi qu'à leurs accessoires.Elle prescrit: - les caractéristiques                          29.260.99
    standard is bilingual:                                    dimensionnelles et mécaniques à spécifier par le fabricant pour chaque outil; - les essais mécaniques
English - French/A noter que                                  correspondants; - les autres points à contrôler (visuels, fonctionnels, marquage, etc.).
  cette norme est bilingue
      français - anglais

  CAN/ULC-D61243-1-00          Live working -- Voltage        This Standard is applicable to portable voltage detectors, with or without built-in power sources, to be used on            13.260       $210.00
    Please note that this      detectors -- Part 1:           electrical systems for voltages of 1 kV to 52 kV a.c., and frequencies from 15 Hz to 60 Hz. It applies only to             29.240.20
   standard is bilingual:      Capacitive type to be used     capacitive voltage detectors used in contact with the part to be tested, as a single unit including its insulating         29.260.99
English - French/A noter que   for voltages exceeding 1kV     pole as covered by CAN/ULC-D61235-00 or CAN/ULC-D60855-00, or as a separate device completed by an
  cette norme est bilingue     a.c.                           adaptable insulating pole covered by CAN/ULC-D61235-00 or CAN/ULC-D60855-00.
      français - anglais


  CAN/ULC-D61243-1-00          Travaux sous tension --        Cette norme est applicable aux détecteurs de tension portatifs avec ou sans alimentation incorporée pour                    13.260       $210.00
    Please note that this      Détecteurs de tension --       utilisation sur réseaux électriques de tensions alternatives de 1 kV à 52 kV, et de fréquences de 15 Hz                    29.240.20
   standard is bilingual:      Partie 1: Détecteurs de type   à 60 Hz. Elle s'applique uniquement aux détecteurs de tension capacitifs utilisés en contact avec la                       29.260.99
English - French/A noter que   capacitif pour usage sur       pièce à essayer, en une seule partie, perche isolante comprise, couverte par la CAN/ULC-D61235-00
  cette norme est bilingue     des tensions alternatives de   ou la CAN/ULC-D60855-00, ou en dispositif séparé complété par une perche isolante adaptable couverte
      français - anglais       plus de 1 kV                   par la CAN/ULC-D61235-00 ou la CAN/ULC-D60855-00.



  CAN/ULC-D61243-2-99          Live working -- Voltage        This part of IEC 1243 is applicable to portable voltage detectors with or without a built-in power source to be used        13.260       $170.00
       Amendment 1             Detectors -- Part 2:           on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. /This part applies           29.240
    Please note that this      Resistive Type to be Used      only to resistive voltage detectors used in contact with the part to be tested, as a single unit or as a separate          29.260.99
   standard is bilingual:      for Voltages Exceeding 1       device completed by an adaptable insulating pole covered in IEC 855 or IEC 1235.
English - French/A noter que   kV to 36 kV a.c.
  cette norme est bilingue
      français - anglais

  CAN/ULC-D61243-2-99          Travaux Sous Tension --        La présente partie de la CEI 1243 est applicable aux détecteurs de tensionportatifs avec ou sans alimentation               13.260       $170.00
       Modification 1          Détecteurs de Tension --       incorporée pour utilisation sur réseauxélectriques de tensions alternatives de 1 kV à 36 kV, et de fréquences               29.240
    Please note that this      Partie 2: Type Résistif Pour   de 15 Hzà 60 Hz.Cette partie s'applique uniquement aux détecteurs de tension résistifs utilisésen contact avec             29.260.99
   standard is bilingual:      Usage sur des Tensions         la pièce à essayer, en une seule partie ou en dispositif séparécomplété par une perche isolante adaptable
English - French/A noter que   Alternatives de 1 kV à 36      conforme à la CEI 855 ou à la CEi1235.
  cette norme est bilingue     kV
      français - anglais

  CAN/ULC-D61243-3-00          Live working -- Voltage        This part of IEC 61243 is applicable to two-pole voltage detectors to be used on electrical systems for nominal             13.260       $185.00
    Please note that this      Detectors -- Part 3: Two-      voltages not exceeding 1 000 V a.c. and/or 1500 V d.c. and below 500 Hz (nominal frequencies).                             29.240.20
   standard is bilingual:      Pole Low-Voltage Type                                                                                                                                     29.260.99
English - French/A noter que
  cette norme est bilingue
      français - anglais




                                                                                                                                                                                                      Page 24 of 39
                                                                                                       CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                              AND OTHER RECOGNIZED DOCUMENTS
                                                                                                     CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                             ET DES AUTRES DOCUMENTS RECONNUS


       ULC STANDARD NO.                TITLE                           ABSTRACT                                                                                                                   ICS CODE    PRICE (CDN)

     CAN/ULC-D61243-3-00               Travaux Sous Tension --         La présente partie de la CEI 61243 concerne les détecteurs de tension-bipolaireutilisés sur les systèmes                    13.260       $185.00
       Please note that this           Détecteurs de Tension --        électriques dont les tensions nominales n'excèdentpas 1 000 V en courant alternatif et/ou 1 500 V en                       29.240.20
      standard is bilingual:           Partie 3: Type Bipolaire        courant continu, et qui sesituent sous 500 Hz (fréquences nominales).                                                      29.260.99
   English - French/A noter que        Basse Tension
     cette norme est bilingue
         français - anglais


      CAN/ULC-D61278-03                Live Working - Guidelines       This guide is intended to define the parameters to be used in the development of standards related to tools and            29.260.99     $100.00
       Please note that this           for Dielectric Testing of       equipment used in live working.
       standard is bilingual:          Tools and Equipment
   English - French/A noter que
     cette norme est bilingue
         français - anglais

      CAN/ULC-D61278-03                Travaux Sous Tension – Guide Ce guide a pour objet les paramètres a utiliser dans la préparation des normes relatives aux outils et équipements            29.260.99     $100.00
       Please note that this           Pour Les Essais Dielectriques utilises dans les travaux sous tension.
       standard is bilingual:          des Outils et Equipements
   English - French/A noter que
     cette norme est bilingue
         français - anglais

      CAN/ULC-61318-03                 Live Working -Guideline for This Technical Report establishes the guidelines for the plans and procedures assuring the quality of tools and                13.340.01     $100.00
       Please note that this           Quality Assurance Plans     equipment used for live working on electrical insatallations. The report incorporates the concept of quality                   29.260.99
      standard is bilingual:                                       assurance based on the ISO 9000 series and also integrates a single sampling plan and procedure using
   English - French/A noter que                                    normal inspection and special inspection levels based on IEC 410.
     cette norme est bilingue
         français - anglais

      CAN/ULC-61318-03                 Travaux Sous Tension –    Le présent rapport technique fournit les plans et procédures faisant partie des normes pour assurer la qualité                   13.340.01     $100.00
       Please note that this           Guide Pour Les Plans      des outils pour travaux sous tension utilises sur des installations électriques. Ce rapport incorpore le concept                 29.260.99
      standard is bilingual:           D’Assurance De La Qualite d’assurance de la qualité apparaissant dans les normes de la série 9000 de l’ISO et integre aussi les plans et
   English - French/A noter que                                  règles d’échantillonnage simple en contrôle normal et spécial de la CEI 410
     cette norme est bilingue
         français - anglais

       CAN/ULC-61328-05                Live Working - Guidelines This National Standard of Canada provides recommendations for the selection and testing where necessary of                        13.260       $185.00
  (CEI/IEC/TR 61328:2003, IDT)         for the Installation of     conductor stringing equipment and accessory items used for the installation of overhead conductors and overhead                29.240.20
                                       Transmission Line           earthwires.                                                                                                                    29.260.99
  Please note that this standard is    Conductors and Earthwires - Procedures are recommended for proper earthing in order to protect equipment, components and personnel from
 bilingual: English - French/À noter   Stringing Equipment and     the induced or fault currents which can result in some circumstances.
     que cette norme est bilingue      Accessory Items             The equipment under consideration in this National Standard of Canada is used for transmission voltages which
          français - anglais                                       are usually considered to be 100 kV and above, but may be as low as 60 kV. Many of the requirements and tests
                                                                   stated apply also to equipment used in distribution systems with less than 100 kV.


       CAN/ULC-61328-05                Travaux Sous Tension –          La présente Norme nationale du Canada fournit des recommandations pour le choix et l'essai, lorsque cela est                13.260       $185.00
  (CEI/IEC/TR 61328:2003, IDT)         Lignes directrices pour         nécessaire, des matériels de déroulage et des accessoires utilisés pour l'installation des conducteurs et câbles de        29.240.20
                                       l'installation des              garde aériens.                                                                                                             29.260.99
  Please note that this standard is    conducteurs et câbles de        Des procédures sont recommandées pour une mise à la terre adéquate afin de protéger l'équipement, les
 bilingual: English - French/À noter   garde des lignes de             composants et le personnel des courants induits ou des courants de défaut pouvant survenir dans certaines
     que cette norme est bilingue      transport - Équipement de       circonstances.
          français - anglais           déroulage et accessoires        L'équipement concerne par la présente Norme nationale du Canada est utilisé pour des tensions de transport, qui
                                                                                                                                                                         être
                                                                       sont généralement considérées comme étant égales ou supérieures a 100 kV, mais qui peuvent • aussi basses
                                                                       que 60 kV. Un grand nombre des exigences et des essais spécifiés s'applique aussi à des équipements utilisés
                                                                       pour des réseaux de distribution de tension inférieure a 100 kV.


       CAN/ULC-61477-05              Live Working - Minimum            This National Standard of Canada gives the minimum requirements relative to specification, manufacture,                     13.260       $60.00
 (CEI/IEC 61477:2001+A1:2002,        Requirements for the          selection, application and maintenance of tools, devices and equipment for live working.                                       29.240.20
              IDT)                   Utilization of Tools, Devices     It provides the type of information which is useful to skilled persons in order to make the use of tools, devices          29.260.99
                                     and Equipment                 and equipment safer.
  Please note that this standard is                                    This type of information includes:
     bilingual: English - French/                                  · the characteristics of tools, devices and equipment;
À noter que cette norme est bilingue                               · their conditions for use;
           français - anglais                                      · their conditions for maintenance;
                                                                   · their conditions for storage and transportation.
                                                                       Such information may be given in standards, manufacturer’s instructions for use and in internal regulations set
                                                                   forth by companies for their own employees.
                                                                       Such information should be complemented by work methods, which are excluded from the scope of this
                                                                   standard. In this standard, the word tool(s) is used for "tools, devices and equipment for live working" unless
                                                                   otherwise specified.

       CAN/ULC-61477-05                Travaux Sous Tension –               La présente Norme nationale du Canada donne les exigences minimales relatives aux spécifications, à la                 13.260       $60.00
 (CEI/IEC 61477:2001+A1:2002,          Exigences Minimales pour        fabrication, à la sélection, à l’emploi et à l’entretien des outils, dispositifs et équipements pour travaux sous          29.240.20
              IDT)                     L'utlisation des Outils,        tension.                                                                                                                   29.260.99
                                       Dispositifs et Équipements          Elle fournit le type d’information utile aux personnes formées de façon à rendre plus sûre l’utilisation des outils,
  Please note that this standard is                                    dispositifs et équipements pour travaux sous tension.
     bilingual: English - French/                                          Ce type d’information comprend:
À noter que cette norme est bilingue                                   · les caractéristiques des outils, dispositifs et équipements;
           français - anglais                                          · leurs conditions d’utilisation;
                                                                       · leurs conditions d’entretien;
                                                                       · leurs conditions d’entreposage et de transport.
                                                                            Ces informations peuvent figurer dans les normes, les instructions d’emploi des fabricants, les règlements
                                                                       internes établis par les entreprises pour leurs employés.
                                                                           Il convient que ces informations soient complétées par des méthodes de travail, lesquelles sont exclues du
                                                                       domaine d’application de cette norme. Dans cette norme, le mot «outils» est utilisé pour «outils, dispositifs et
                                                                       équipements pour travaux sous tension» sauf indication contraire.
       CAN/ULC-61478-05                Live Working - Ladders of           This National Standard of Canada is applicable to fully insulating spliced or hook ladders with extension or            13.260       $110.00
 (CEI/IEC 61478:2001+A1:2003,          Insulating Material             having a combination of insulating and conductive sections and used for live working on a.c. or d.c. electrical            29.240.20
              IDT)                                                     installations at     1 000 V and above for a.c. and 1 500 V and above for d.c.                                             29.260.99
                                                                           The ladders are classified functionally as Category 1 and Category 2.
  Please note that this standard is                                        This standard concerns only ladders made of synthetic material.
     bilingual: English - French/                                          These ladders are used, to provide access, generally on overhead line structures and to facilitate live working,
À noter que cette norme est bilingue                                   either hot stick, barehanded or a combination of both.
           français - anglais




                                                                                                                                                                                                               Page 25 of 39
                                                                                                  CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                                         AND OTHER RECOGNIZED DOCUMENTS
                                                                                                CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                                        ET DES AUTRES DOCUMENTS RECONNUS


       ULC STANDARD NO.                TITLE                        ABSTRACT                                                                                                                   ICS CODE      PRICE (CDN)

       CAN/ULC-61478-05                Travaux Sous Tension –           La présente Norme nationale du Canada s’applique aux échelles entièrement isolantes (échelles à éléments                13.260         $110.00
 (CEI/IEC 61478:2001+A1:2003,          Échelles en Matériau         emboîtables ou échelles à crochets avec rallonge) ou comportant une combinaison d’éléments conducteurs et                  29.240.20
              IDT)                     Isolant                      d’éléments isolants et utilisées pour les travaux sous tension sur des installations électriques en courant alternatif     29.260.99
                                                                    ou continu ayant une tension nominale égale ou supérieure à 1 000 V en alternatif et à 1 500 V en continu.
  Please note that this standard is                                     Les échelles sont classées fonctionnellement en Catégorie 1 et Catégorie 2.
     bilingual: English - French/                                       La présente norme ne concerne que les échelles réalisées en matériau synthétique.
À noter que cette norme est bilingue                                    Ces échelles sont utilisées pour permettre l’accès généralement sur des supports de lignes aériennes et
           français - anglais                                       faciliter les travaux sous tension, que ce soit à distance, au potentiel, ou une combinaison des deux.




       CAN/ULC-61479-05                Live working - Flexible         This National Standard of Canada is applicable to flexible insulating covers (line hoses) for the protection of          13.260         $120.00
 (CEI/IEC 61479:2001+A1:2002,          Conductor Covers (Line       workers from accidental contact with live or earthed electrical conductors and for the avoidance of short circuits         29.240.20
              IDT)                     Hoses) of Insulating         during live working.                                                                                                       29.260.99
                                       Material                        Five classes of conductor covers, differing in electrical characteristics, are provided and designated as class 0,
  Please note that this standard is                                 class 1, class 2, class 3, and class 4.
     bilingual: English - French/                                      Six categories of conductor covers differing in composition and properties are provided: category A – acid
À noter que cette norme est bilingue                                resistant, category H – oil resistant, category C – formulated for extreme low temperature environments, category
           français - anglais                                       W – formulated for extreme high temperature environments, category Z – ozone resistant, and category P –
                                                                    formulated for humid environment.
                                                                       Various styles of conductor covers, differing in construction characteristics are available and six of these are
                                                                    designated as style A, style B, style C, style D, style E, (see figure 1), and style F.


       CAN/ULC-61479-05              Travaux Sous Tension –            La présente Norme nationale du Canada est applicable aux protecteurs flexibles isolants destinés à protéger              13.260         $120.00
 (CEI/IEC 61479:2001+A1:2002,        Protecteurs de conducteurs les travailleurs d’un contact accidentel avec des conducteurs électriques sous tension ou à la terre et à éviter les           29.240.20
              IDT)                   flexibles en matériau isolant courts-circuits pendant les travaux sous tension.                                                                           29.260.99
                                                                       Cinq classes de protecteurs de conducteurs, de caractéristiques électriques différentes, sont disponibles sous
  Please note that this standard is                                la désignation de classe 0, classe 1, classe 2, classe 3 et classe 4.
     bilingual: English - French/                                      Six catégories de protecteurs de conducteurs, ayant une composition et des propriétés différentes sont
À noter que cette norme est bilingue                               disponibles: catégorie A – pour la résistance à l'acide, catégorie H – pour la résistance à l'huile, catégorie C – pour
           français - anglais                                      les environnements de très basses températures, catégorie W – pour les environnements de très hautes
                                                                   températures, catégorie Z – pour la résistance à l'ozone et catégorie P – pour l’environnement humide.
                                                                       Des styles de protecteurs de conducteurs, différents par leurs caractéristiques constructives, sont disponibles
                                                                   et six de ces styles sont désignés comme style A, style B, style C, style D, style E, (voir figure 1), et style F.



       CAN/ULC-61911-05                Live Working - Guidelines    This National Standard of Canada provides recommendations for the selection and testing, where necessary of                 13.260         $155.00
    (CEI/IEC 61911:2003, IDT)          for the Installation of      conductor stringing equipment and accessory items used for the installation of bare and insulated overhead                 29.240.20
                                       Distribution Line            distribution conductors.                                                                                                   29.260.99
  Please note that this standard is    Conductors - Stringing
 bilingual: English - French/À noter   Equipment and Accessory      Procedures are recommended for proper earthing in order to protect equipment, components and personnel from
     que cette norme est bilingue      Items                        currents which can result from accidental contact with nearby energized conductors, or induced voltage from
          français - anglais                                        adjacent energized lines, lightning strikes, switching errors or electrostatic charging..

                                                                    The equipment under consideration in this National Standard of Canada is used for distribution voltages, usually
                                                                    considered to be below 50 kV.

                                                                    However for voltages of 50 kV and above, use of Standard CAN/ULC-61328-05 may be more appropriate. The
                                                                    choice of whether Standard CAN/ULC-61328-05 or this National Standard of Canada applies to the work being
                                                                    considered will usually depend on the physical size of the conductors, the size of the structures and the average
                                                                    span between supports.


       CAN/ULC-61911-05               Travaux Sous Tension –        La présente Norme nationale du Canada fournit des recommandations pour le choix et l'essai, lorsque cela est                13.260         $155.00
    (CEI/IEC 61911:2003, IDT)         Lignes directrices pour       nécessaire, des matériels de déroulage et des accessoires utilisés pour l'installation de conducteurs nus et isolés        29.240.20
                                      l'installation des            de lignes aériennes de distribution.                                                                                       29.260.99
  Please note that this standard is conducteurs des lignes de
bilingual: English - French / À noter distribution - Équipement     Des procédures sont recommandées pour une mise à la terre adéquate afin de protéger l'équipement, les
     que cette norme est bilingue     de déroulage et accessoires   composants et le personnel des courants pouvant résulter de contacts accidentels avec des conducteurs sous
          français - anglais                                        tension voisins, ou d'une tension induite par des lignes sous tension adjacentes, de coups de foudre, d'erreurs de
                                                                    manœuvre ou d'une charge électrostatique.

                                                                    L'équipement a l'étude dans cette Norme nationale du Canada est utilisé pour des tensions de distribution,
                                                                    généralement considérées comme étant inférieures a 50 kV.

ULC/ORD-C10(c)-1986                    Guide for Evaluating Doors These requirements are primarily for use by manufacturers of doors and door frames. These requirements                         19.040        $110.00
                                       and Frames for Listing and cover the CAN4-S104 test evaluations for swinging and sliding doors and door frames. Listings will be based on                 19.060
                                       Labelling                   the                                                                                                                         91.060.50
                                                                   largest size of assembly tested and the maximum duration of test.
ULC/ORD-C14(e)-M1985                   Guide for Hardware for Fire This Guide covers the test requirements for hardware intended for use on fire doors and emergency exits for                  91.190         $110.00
                                       Doors and Emergency Exits swinging
                                                                   and sliding doors. These requirements shall pertain to both fire protection and panic features. This Guide does not
                                                                   cover non-essentials such as push plates, pullhandles, protective plates, plant-ons, etc.

ULC/ORD-C25-1992                       Meters for Flammable and     These requirements cover positive displacement meters for flammable and combustible liquids and propane in the 17.120 75.200               $110.00
                                       Combustible Liquids and      liquid phase. These requirements do not cover: meters for use with propane in the gaseous phase; velocity
                                       Propane                      meters,
                                                                    head meters, or area meters; and meter components incorporating electrical circuits.

ULC/ORD-C30-1995                       Safety Containers            These Requirements cover portable safety containers intended for the temporary storage and handling of small             55.140 75.200     $110.00
                                                                    quantities (up to 25 L) of flammable and combustible liquids such as gasoline, fuel oil, or similar products with
                                                                    a relative density not greater than 1.0.


ULC SUBJECT C47-1973                   Preliminary Standard for  These requirements cover semiautomatic hose rack assemblies and component parts for such assemblies                           13.220.30       $110.00
                                       Fire Hose Rack Assemblies intended for use in controlling incipient fires by occupants of buildings or those untrained in handling fire                 23.040.70
                                                                 streams.




                                                                                                                                                                                                              Page 26 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                         ABSTRACT                                                                                                                 ICS CODE     PRICE (CDN)

ULC/ORD-C48.1-01        Installation of Field         This Document contains the requirements for installation of field assembled skeletal neon signs and outline                 NA          $110.00
                        Assembled Skeletal Neon       lighting systems, and is to be used in conjunction with the following documents:
                        Signs and Outline Lighting
                                                      A C22.1, Safety Standard for Electrical Installations, Canadian Electrical Code, Part 1; and
                                                      B CAN/CSA-C22.2 No. 207, Portable and Stationary Electric Signs and Displays.

                                                      This Document is intended to provide evaluation of the electrical equipment and interconnecting wiring
                                                      comprising of complete field assembled skeletal neon signs and outline lighting systems that otherwise
                                                      are not intended to be evaluated in accordance with CSA SPE-1000 (Model Code for the Field Evaluation
                                                      of Electrical Equipment), or to be certified in conformance with CSA-C22.2 No.207 (Portable and
                                                      Stationary Electric Signs and Displays).

                                                      These systems are intended to be field assembled for permanent installation in accordance with
                                                      Section 34 (Signs and Outline Lighting) of CSA C22.1 (Safety Standard for Electrical Installations,
                                                      Canadian Electrical Code, Part 1) and this Document.

                                                      The installation of skeletal neon signs or outline lighting systems complying with this Document:

                                                      A Have been assembled and installed by an installer authorized to apply a recognized certification
                                                      mark;
                                                      B Employs materials and components certified in accordance with Canadian Standards; and
                                                      C Is subject to a field inspection program covering proper installation of the system.

ULC/ORD-C58.4-05        Double Containment Fibre      These requirements provide the minimum performance criteria for double containment linings used for new and              23.020.10,     $140.00
                        Reinforced Plastic Linings    existing aboveground and underground non-pressure storage tanks made of steel or non-metallic construction for           25.220.99
                        for Flammable and             flammable and combustible liquids. Aboveground tanks shall be with secondary containment in accordance with
                        Combustible Liquid Storage    the requirements of the National Fire Code of Canada or the regulations of the authority having jurisdiction.
                        Tanks                         The linings may be used to upgrade a new or existing tank through the addition of a liquid tight layer to the interior
                                                      of the tank and by providing a monitorable interstice between this interior layer and the external tank wall at all
                                                      locations below the normal liquid level of the tank.

                                                      The linings are constructed of fibreglass reinforced plastic materials. These linings provide protection against
                                                      internal corrosion or chemical attack to new or existing tanks.

                                                      The linings may be used to provide leak detection and structural upgrade to existing tanks.

                                                      The linings are intended for use in the construction, refurbishment, or upgrade of tanks manufactured in
                                                      accordance with the applicable requirements of any one of the following Standards:

                                                      A ULC-S601, Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable and
                                                      Combustible Liquids; or

                                                      B   ULC-S615, Standard for Reinforced Plastic Underground Tanks for Flammable and Combustible Liquids.



ULC/ORD-C58.9-1997      Secondary Containment         The following requirements provide the minimum criteria for the material properties and performance of                    75.200        $110.00
                        Liners for Underground and    Secondary Containment Liners (referenced in this document as "Liners") for use below and around
                        Aboveground Flammable         underground and aboveground flammable and combustible liquid and other specific chemical storage
                        and Combustible Liquid        tanks facilities. These requirements cover pre-fabricated lining materials and liners which are field
                        Tanks                         formed utilising spraying techniques.


ULC/ORD-C58.10-1992     Jacketed Steel                These requirements cover cylindrical horizontal steel tanks of the non-pressure type which are: manufactured in          23.020.10      $110.00
                        Underground Tanks for         accordance with the applicable requirements of the Standard for Steel Underground Tanks for Flammable and
                        Flammable and                 Combustible Liquids, CAN4-S603M; used for the underground storage of flammable and combustible liquids
                        Combustible Liquids           such as gasoline, fuel oil, and similar products; and provided with corrosion protection in accordance with
                                                      the requirements contained in this Document, as an alternative to the protection specified in the Standard
                                                      for Galvanic Corrosion Protection Systems for Underground Tanks for Flammable and Combustible Liquids,
                                                      CAN4-S603.1.M.


ULC/ORD-C58.12-1992      Leak Detection Devices       These requirements cover equipment for the detection of leakage from underground flammable liquid storage                 17.060        $110.00
                        (Volumetric Type) for         tanks by directly or indirectly measuring the presence of liquid, or changes in the level of liquid over a period        23.020.10
                        Underground Flammable         of time.                                                                                                                  75.200
                        Liquid Storage Tanks          These requirements provide for the determination of the capability of equipment for the measurement of
                                                      actual or potential leakage rates within defined statistical probabilities. These requirements do not cover
                                                      non-volumetric leak detection equipment or methods.


ULC/ORD-C58.14-1992      Non-Volumetric Leak          These requirements cover equipment and procedures for the detection o leakage from underground flammable                  17.060        $110.00
                        Detection Devices for         liquid storage tanks by qualitative characteristic assessment of leakage, changes in the volume in a qualitative         23.020.10
                        Underground Flammable         manner or the presence of product external to the tank. These requirements provide for the determination of               75.200
                        Liquid Storage Tanks          the capability of equipment and procedures for the measurement of actual or potential leakage within defined
                                                      statistical probabilities. These requirements do not cover quantitative volumetric leak detection equipment or
                                                      methods.




ULC/ORD-C58.15-1992     Overfill Protection Devices   These requirements cover equipment and procedures for the detection o leakage from underground flammable                 23.020.10      $110.00
                        for Flammable Liquid          liquid storage tanks by qualitative characteristic assessment of leakage, changes in the volume in a qualitative          23.060
                        Storage Tanks                 manner or the presence of product external to the tank. These requirements provide for the determination of the           75.200
                                                      capability of equipment and procedures for the measurement of actual or potential leakage within defined
                                                      statistical probabilities.These requirements do not cover quantitative volumetric leak detection equipment or
                                                      methods.

ULC/ORD-C58.19-1992     Spill Containment Devices     The following requirements provide the minimum criteria for the construction and performance of Spill                    23.020.10      $110.00
                        for Underground               Containment                                                                                                               55.120
                        Flammable Liquid Storage      Devices for Underground Flammable Liquid Storage Tanks                                                                    75.200
                        Tanks
ULC/ORD-C58.20-1996     Special Corrosion             These requirements cover cylindrical horizontal steel tanks of the non-pressure type which are: manufactured in           25.220        $110.00
                        Protection Underground        accordance with the applicable requirements of the Standard for Steel Underground Tanks for Flammable and
                        Tanks for Flammable and       Combustible Liquids, CAN/ULC-S603M; provided with a factory-applied corrosion protection coating in
                        Combustible Liquids           accordance
                                                      with the requirements contained in this Document as an alternative to the protection specified in the Standard for
                                                      Galvanic Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids,
                                                      CAN/ULC-S603.1; and used for the underground storage of flammable and combustible liquids such as gasoline,
                                                      fuel oil, and similar products.


ULC/ORD-C72-1992        Tests for Fire Resistance of These requirements cover the test procedure applicable to the fire-resistance classification of record protection         13.220.40      $110.00
                        Record Protection            equipment intended to provide protection to one or more types of records when exposed to various durations of              19.040
                        Equipment                    fire exposure.                                                                                                             97.140




                                                                                                                                                                                             Page 27 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                         ABSTRACT                                                                                                               ICS CODE    PRICE (CDN)

ULC/ORD-C79.1-04        Manual Pumps For Use          These requirements apply to manual pumps intended to be used with liquid petroleum fuels such as gasoline,              23.080       $110.00
                        With Liquid Petroleum         diesel                                                                                                                  75.200
                        Fuels                         or kerosene. The intended use of this pump is to transfer petroleum fuel from a certified portable container, with a   75.160.20
                                                      maximum capacity of 25 L, to equipment such as chainsaws, lawn mowers, lawn tractors and yard maintenance
                                                      equipment, that would normally be refueled from a portable gasoline container. The pumps are intended to reduce
                                                      spillage when used for the purpose stated above. This document is not a fire hazard document

ULC/ORD-C80.1-2000      Aboveground Non-Metallic      This ORD provides the minimum criteria for the material properties and performance of aboveground non-metallic         23.020.10     $140.00
+A389                   Tanks for Fuel Oil            tanks of the stationary non-pressure type intended for installation inside or outside buildings, for the storage and   75.160.20
                                                      supply of fuel oil.

                                                      These requirements cover single wall tanks and tanks with secondary containment. They cover the design and
                                                      construction of non-metallic fuel oil storage tanks up to 2 500 L capacity. Tanks of fibreglass construction, in
                                                      addition to these requirements, shall meet the applicable requirements of the Standard for Reinforced Plastic
                                                      Underground Tanks for Flammable and Combustible Liquids, ULC-S615.

                                                      These requirements cover tanks fabricated, inspected and tested for leakage before shipment from the factory.
                                                      These requirements cover the construction of tanks for use in stationary installations. The installation of such
                                                      tanks may be covered by, but not limited to, any of the following documents:

                                                      A CSA B139, Installation Code for Oil Burning Equipment;
                                                      B Regulations of the appropriate Authority Having Jurisdiction; and
                                                      C Environmental Code of Practice for Aboveground Storage Tank Systems Containing Petroleum Products.

ULC/ORD-C100-1992       Smoke Control System          These requirements cover the design, construction and performance of Smoke Control System Equipment,                     13.040      $110.00
                        Equipment                     including such devices as the system control unit, emote control units, operator interface devices and                 13.220.30
                                                      firefighter's smoke control station. Since smoke control systems are specially designed to meet the specific
                                                      needs of an individual building and its occupants, this document does not include requirements covered by
                                                      the Authorities Having Jurisdiction.


ULC Subject C107-1975   Guide for the Investigation   These requirements cover asbestos-cement pressure pipe, couplings, and gaskets for use in public and private           23.040.30     $110.00
                        of Asbestos-Cement Pipe       water works and fire service systems and connections to such systems.
                        and Couplings
ULC/ORD-C107.12-1992    Line Leak Detection           These requirements cover equipment for the detection of leakage from underground flammable liquid pipeline             23.040.01     $110.00
                        Devices for Flammable         systems by directly or indirectly measuring changes in the volume or pressure of the liquid in the system              75.180.30
                        Liquid Piping                 over a period of time.

ULC/ORD-C107.21-1992    Under-Dispenser Sumps         These requirements cover sumps which are intended to be installed under a dispensing device for flammable               75.200       $110.00
                                                      liquids to collect and contain any internal liquid leaking from the dispensing device during operation or routine
                                                      maintenance.


ULC Subject C123-1975   Guide for the Investigation   These requirements cover oxy-fuel gas torches employed in operations such as welding, cutting, heating,                25.060.20     $110.00
                        of Torches, Oxy-Fuel Gas      scarfing, powder cutting, or other allied processes. These requirements do not apply to torches in which
                                                      the fuel gas aspirates atmospheric air or to metal-spraying torches.

ULC/ORD-C125-1992       Valves for Anhydrous          These requirements cover the following types of anhydrous ammonia and propane valves: Shutoff Valves;                   23.060       $110.00
                        Ammonia and Propane           Excess Flow Valves; Back Pressure Check Valves; Filler Valves; and Vapour Return Valves. These                          75.200
                        (Other than Safety Relief)    requirements do not apply to propane valves for use on containers or in systems for refrigerated storage
                                                      systems or marine and pipeline terminals, chemical plants, natural gas processing plants, refineries or
                                                      tank farms, where "tank farms" do not include storage at industrial locations. These requirements do not
                                                      apply to valves for anhydrous ammonia or use on containers or in systems for the following: refrigerated
                                                      storage systems; ammonia manufacturing plants; refrigeration plants where ammonia is used solely as
                                                      a refrigerant; or ammonia transportation pipelines.


ULC/ORD-C127-M1990      Composite Fire-Logs           These requirements cover composite fire logs having a maximum mass of 3 kg for use in designated certified             75.160.10     $110.00
                                                      solid fuel burning appliances and masonry fireplaces.

ULC/ORD-C127.1-1993     Composite Fire-Log            These requirements cover composite fire-log starters for use in residential factory-built solid fuel burning            97.180       $110.00
                        Starters                      appliances and masonry fireplaces.

ULC/ORD-C132-1992       Safety Relief Valves for      These requirements cover safety relief valves and hydrostatic relief valves for anhydrous ammonia and propane           23.060       $110.00
                        Anhydrous Ammonia and         for use in non-refrigerated systems in facilities covered by the following Standards: ANSI K61.1, Storage and           75.200
                        Propane                       Handling of Anhydrous Ammonia; CAN/CGA-B149, Propane Installation Code; and NFPA No. 59, Storage and
                                                      Handling of Liquefied Petroleum Gases at Utility Plants. These requirements do not apply to safety and relief
                                                      valves for use on containers constructed in accordance with Canadian Transport Commission (CTC)
                                                      Specifications.

ULC/ORD C140-1974       Guide for Investigation of    These requirements cover relocking devices which primarily are intended to relock the boltwork of doors or               13.310      $110.00
                        Relocking Devices             relock the door of a safe, chest, or vault in the event of burglarious attack on the combination lock. The             21.060.30
                                                      devices may include interior unlocking or escape mechanisms intended to readily release the boltwork by
                                                      persons locked within the vault but shall not detract from the protection afforded. These requirements cover
                                                      devices intended for factory installation on doors.


ULC/ORD-C142.6-2000     Storage Vaults                These requirements provide the minimum criteria for the construction and performance of storage vaults                 23.020.10     $110.00
                                                      intended for outdoor installation for the storage and collection, and optionally, dispensing of small                   75.200
                                                      quantities of flammable and combustible liquids in and from containers and portable tanks built in
                                                      conformance with: drums as defined in the "Transportation of Dangerous Goods Regulations"; CSA
                                                      B376-M, "Portable Containers for Gasoline and other Petroleum Fuels"; CSA B306-M, "Portable Fuel
                                                      Tanks for Marine Use"; and ULC/ORD-C30, "Safety Containers". These requirements apply to storage
                                                      vaults not more than one storey in height and not greater than 100 m² in floor area.

ULC/ORD-C142.14-03      Nonmetallic Bulk              The following requirements provide the minimum criteria for the material properties and performance of                 23.020.10     $110.00
Amendment 1             Containers For New            nonmetallic                                                                                                             75.080
                        Lubricating Oil               containers of the non-pressure type, intended to bulk store and dispense combustible (such as new lubricating oil)
                                                      and non-combustible liquids (such as windshield washer fluid, anti-freeze, etc.). These requirements cover
                                                      single
                                                      wall containers or containers with secondary containment, that dispense liquids by way of gravity or by a non-
                                                      pressure type pump (hand or air-operated).

                                                      These requirements cover the design and construction of nonmetallic containers up to 2500 L nominal
                                                      capacity.These requirements cover containers fabricated, inspected and tested for leakage before shipment from
                                                      the factory.These requirements cover the construction of containers for use in stationary installations inside
                                                      buildings, mainly in automotive repair and service centres and shops.The installation of such containers may
                                                      be covered by any of the following documents:
                                                      A National Fire Code of Canada, Part 4;
                                                      B Regulations of the appropriate authority having jurisdiction.




                                                                                                                                                                                          Page 28 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                         ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

ULC/ORD-C142.15         Precast Concrete Tanks        These requirements cover stationary aboveground and underground precast concrete tanks, and underground                  NA         $110.00
                                                      vaults.

                                                      These requirements cover:
                                                       A Tanks intended for use as primary containment for liquids that are non-destructive to concrete, such as water
                                                      contaminated with oil, waste water, or similar products; and,
                                                       B Tanks and vaults intended for use as secondary containment for flammable and combustible liquids.

                                                      This document is a companion document to CAN/ULC-S656, Standard for Oil-Water Separators.

                                                      This document is a reference document for manufacturing precast concrete tanks, such as "Protected Tanks,
                                                      ULC-S655" and "Secondary Containments for Aboveground Flammable and Combustible Liquid Storage Tanks,
                                                      ULC/ORD-C142.20."

                                                      These requirements cover below-grade vaults intended for the storage of flammable and combustible liquids in
                                                      an aboveground tank.


ULC/ORD-C142.17-1998    Special Purpose               These requirements cover special purpose relocatable aboveground vertical steel storage tanks of the non-             23.020.10     $110.00
                        Relocatable Aboveground       pressure                                                                                                              23.020.99
                        Vertical Tanks for            type that are used for the bulk storage of flammable and combustible liquids with a relative density of not greater
                        Flammable and                 than 1.0, such as gasoline, fuel oil or similar products.
                        Combustible Liquids
ULC/ORD-C142.18-1995     Rectangular Steel            These requirements cover single wall steel tanks and tanks with secondary containment (either double-walled or        23.020.10     $110.00
                        Aboveground Tanks for         contained) of the rectangular non-pressure design that are used for the aboveground storage of flammable and
                        Flammable and                 combustible liquids such as gasoline, fuel oil, diesel fuel or similar products with a relative density not greater
                        Combustible Liquids           than 1.0.


ULC/ORD-C142.19-1994     Spill Containment Devices These requirements provide the minimum criteria for the construction and performance of Spill Containment                23.020.10     $110.00
                        for Aboveground            Devices for Aboveground Flammable and Combustible Liquid Storage Tanks.                                                   75.200
                        Flammable and
                        Combustible Liquid Storage
                        Tanks
ULC/ORD-C142.20-1995     Secondary Containment        These requirements cover secondary containments for aboveground primary tanks intended for the storage of             23.020.10     $110.00
                        for Aboveground               flammable and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not          75.200
                        Flammable and                 greater than 1.0.
                        Combustible Liquid Storage
                        Tanks
ULC/ORD-C142.21-1995    Aboveground Used-Oil          These Requirements provide the minimum criteria for aboveground used oil systems that eliminate, to a large           23.020.99     $110.00
                        Systems                       extent, the manual handling of used oil.                                                                               23.080
                                                                                                                                                                             75.200
ULC/ORD-C142.22-1995    Contained Vertical Steel      These requirements cover contained vertical steel aboveground tank assemblies that are used for the storage of        23.020.10     $110.00
                        Aboveground Tank              flammable and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not          75.200
                        Assemblies for Flammable      greater than 1.0.
                        and Combustible Liquids

ULC/ORD-C142.5-1992     Concrete Encased Steel        These requirements cover concrete encased tank assemblies, maximum capacity 40 000 L, for the outdoor                 23.020.10     $110.00
                        Aboveground Tank              aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a       91.100.30
                        Assemblies for Flammable      relative density not greater than 1.0.
                        and Combustible Liquids

ULC Subject C144-1975   Guide for the Investigation   These requirements cover pressure regulators for use with LP-Gas equipment other than automotive. They are            23.060.40     $110.00
                        of Pressure-Regulating        not intended to cover regulators for utility gas plants or petroleum refineries, chemical process uses, or
                        Valves                        regulators for use in gas-welding and cutting operations.

ULC/ORD-C147-1975       Guide for the Investigation   WITHDRAWN 2006                                                                                                        25.160.50   WITHDRAWN
WITHDRAWN MARCH 2006    of LP-Gas Torches                                                                                                                                   75.160.30




ULC Subject C155-1975   Preliminary Standards for    These requirements cover the test procedure for the fire-resistance classification of doors intended for the           13.220.50     $110.00
                        Tests for Fire Resistance of protection of openings of vaults and file rooms. The requirements do not cover other possible hazard aspects             19.040
                        Vault and File Room Doors of such products.                                                                                                         91.060.50

ULC/ORD-C180-97         Liquid Level Gauges and       These requirements cover liquid-level gauges and indicators for use on vented tanks used for the storage of           75.180.99     $110.00
                        Indicators for Fuel Oil and   fuel oil and lubricating oil.
                        Lubricating Oil Tanks
ULC Subject C193-1975   Guide for the Investigation   These requirements cover alarm valves for use in automatic wet-pipe sprinkler systems for fire-protection service.    13.220.20     $110.00
                        of Alarm Valves for Fire-     Alarm valves covered by these requirements are of either the variable- or constant-pressure type and are of the        13.320
                        Protection Service            swing-check pattern. Ordinarily, variable-pressure alarm valves will prove suitable for constant-pressure service
                                                      without alteration, but in certain designs that portion of the device which has to do with the delaying of alarms
                                                      may be omitted.

ULC Subject C194-1975   Guide for the Investigation These requirements cover gasketed joints of cast-iron pipe and fittings, 2-48 inches in diameter, for conveying         23.040.10     $110.00
                        of Gasketed Joints for Cast- water in public and private waterworks and fire service systems.                                                       23.040.40
                        Iron Pressure Pipes and                                                                                                                             23.040.80
                        Fittings
ULC/ORD-C199D-03        Guards for Sprinklers        These requirements cover sprinkler guards intended for installation in accordance with the Standard for the            13.220.20     $110.00
                                                     Installation of Sprinkler Systems, NFPA 13. The guards are to be installed on specific models of pendent,
                                                     upright or intermediate level sprinklers as indicated in the installation instructions for the guards. The guards
                                                     are intended to protect sprinklers from mechanical damage.

ULC/ORD-C199P-02        Combustible Piping for        These requirements cover combustible pipe and fittings for use in sprinkler systems for fire protection service.      13.220.20     $110.00
                        Sprinkler Systems                                                                                                                                   23.040.20
                                                                                                                                                                            23.040.45
ULC/ORD-C199S-M1994     Light Wall Steel Pipes for These requirements cover light wall steel pipes for use in sprinkler systems.                                            13.220.20     $110.00
                        Sprinkler Systems for Fire
                        Protection Services
ULC/ORD-C203-03         Pipe Hanger Equipment for These requirements cover the performance of pipe hanger equipment for use in supporting piping employed in                13.220.20     $110.00
                        Fire Protection Service    sprinkler systems, water-spray systems, and other piping systems used for fire-protection service.These
                                                   requirements cover design variations of hangers defined in Section 2, and do not cover products fabricated from
                                                   rods of iron or steel with diameters specified by the Standard for the Installation of Sprinkler Systems, NFPA
                                                   13, such as U-type hangers, hanger rods, coach screws, and similar products.




                                                                                                                                                                                         Page 29 of 39
                                                                                        CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                               AND OTHER RECOGNIZED DOCUMENTS
                                                                                      CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                              ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.       TITLE                         ABSTRACT                                                                                                             ICS CODE    PRICE (CDN)

ULC/ORD-C203A-1998          Sway Brace Devices for        These requirements cover sway brace devices intended to protect sprinkler system piping against damage from          13.220.20     $110.00
                            Sprinkler System Piping       earthquakes, when they are installed in accordance with the Standard for Installation of Sprinkler Systems,          91.120.25
                                                          NFPA 13.

ULC/ORD-C210C-M1986         Guide for Listing and         These Requirements apply to Factory-Built Chimney Connectors which do not require field fabrication. They are           NA         $110.00
                            Labelling of Factory-Built    for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment where the
                            Chimney Connectors            flue-gas temperatures do not normally exceed 540 degrees C. They are intended for use inside buildings to form
                                                          a connection to a type 650 degrees C factory-built or masonry chimney.


ULC/ORD-C213-1996           Rubber Gasketed Fittings      These requirements cover rubber gasketed fittings, intended for joining and providing outlets from grooved or        13.220.20     $110.00
                            for Fire Protection Service   plain ended piping.                                                                                                  23.040.99
ULC/ORD-C213B-03            Welded Outlet Fittings        These requirements covered welded outlet fittings for installation in accordance with the Standard for the           13.220.20     $110.00
                                                          Installation of Sprinkler Systems, NFPA 13.
ULC/ORD-C228-1995           Door Closers and Holders      This Document establishes requirements for door holding-closing equipment in the following arrangements: closer       91.190       $110.00
                                                          with a separately installed holder-release unit actuated by a signal from a separately installed smoke detector or
                                                          other source; a single unit incorporating closing and holding-release functions actuated by a signal from a
                                                          separately installed smoke detector or other source; or a single unit incorporating closing, holding-release, and
                                                          smoke detection functions.


ULC/ORD-C252-1975           Guide for the Investigation These requirements cover pressure regulators which reduce the storage cylinder of line gas pressure to the use         23.020.30     $110.00
                            of Gas Pressure Regulators pressure. Regulators covered by these requirements are intended for use with (1) gases for welding and cutting          23.060.40
                                                        operations, (2) inert gases, or (3) non-flammable medical gases.


ULC/ORD-C258-03             Shutoff Valves for Trim and These requirements cover shutoff valves for trim and drain purposes for fire protection service. These valves are      13.220.20     $110.00
                            Drain Purposes for Fire     intended for installation in sprinkler systems in accordance with NFPA 13, Standard for the Installation of
                            Protection Service          Sprinkler Systems.

ULC Subject C260-1975       Guide for the Investigation   These requirements apply to valve equipment employed in piping systems to automatically supply water to dry          13.220.20     $110.00
                            of Dry Pipe, Deluge and       pipe, deluge (empty pipe), and pre-action sprinkler systems for fire-protection service.                              23.060
                            Pre-Action Valves for Fire
                            Protection
ULC/ORD-C262-1992           Gate Valves for Fire          These requirements cover gate valves employed in piping systems supplying water for fire-protection service.         13.220.20     $110.00
                            Protection Service            Gate valves may be of the outside-screw-and-yoke type or of the inside-screw non-rising stem type, the               23.060.30
                                                          latter for installation either above or below ground.

ULC Subject C263(e)-M1988   Criteria for Use in         This document is based on generally accepted principles involving the extension of test data using simple               19.040       $110.00
                            Extension of Data from Fire considerations. The aceptance of these principles and their application is based substantially on what
                            Endurance Tests             might be termed "an analogous worst case proposition"together with the consideration of precepts such as
                                                        Ten Rules of Fire Endurance. These principles are applicable to assemblies subject to temperature conditions
                                                        represented by the standard time-temperature curve described in CAN4-S101M.

ULC/ORD-C263.1-99           Sprinkler-Protected           This test method enables an assessment of the performance, under controlled fire exposure conditions, of a           13.220.99     $110.00
                            Windows Systems               sprinkler protected window system.                                                                                     19.060
                                                                                                                                                                               91.060.50
ULC/ORD-C263.5-99           Exterior Insulation and       This describes the minimum performance criteria can be and minimum technical requirements applicable for the         25.220.20     $110.00
                            Finish Systems (EIFS)         assessment of Exterior Insulation and Finish Systems (EIFS) Class PB and Class PM, consisting of
                                                          prefabricated panels or panels constructed on-site.

ULC/ORD-C263.7-2000         Room Fire Test Method for This document describes the test method used to determine the contribution of garage doors using foamed                     NA         $110.00
                            Garage Doors Using        plastic insulation to the creation of fire hazard under specified fire exposure conditions. The test is conducted
                            Foamed Plastic Insulation in a standard room configuration.

                                                          The test method is to be used to evaluate the flammability characteristics of garage door assemblies using
                                                          foamed plastic insulation employing materials or having forms of construction differing from those detailed
                                                          below:

                                                          A Garage door assemblies using foamed plastic insulation when the foamed plastic is separated from
                                                          occupied spaces by a facing of minimum 0.38 mm (0.015 in.) sheet metal with a melting point not below
                                                          650°C;

                                                          B Factory assembled garage door assemblies using thermosetting foamed plastics having a flame spread
                                                          of not more than 200 , where the insulation is covered on the interior with metallic foil, and the flame spread
                                                          rating of the factory assembled garage doors is not more than 2001 and no air spaces incorporated within
                                                          the factory assembled garage door.

                                                          This test method is not intended to evaluate the fire endurance of assemblies, nor does it provide full
                                                          information oncerning the toxicity of combustion gases or residues.




ULC/ORD-C268.13-93          Smoke-Alarms for Mobile       These requirements cover the design, construction, and performance of smoke-alarms for installations in mobile       13.220.20     $110.00
                            Homes and Recreational        homes and recreational vehicles.                                                                                      13.320
                            Vehicles                                                                                                                                            43.160
ULC/ORD-C275.1-00           Installation of Aftermarket   These requirements are a set of recommended practices for installation facilities handling the installation of          NA         $110.00
                            Automobile Theft Deterrent    aftermarket automobile theft deterrent devices in light duty vehicles equipped with direct current (d.c.)
                            Devices                       electrical systems.

                                                          This ORD is intended to assist in the implementation of the requirements of the Standard for Automobile Theft
                                                          Deterrent Equipment and Systems: Electronic Immobilization, CAN/ULC-S338-98.


ULC Subject C305-M1972      Panic Hardware                These Requirements cover releasing devices actuated by a crossbar for outward-opening doors, designed to               21.060      $110.00
                                                          facilitate the safe egress of persons from buildings in the event of panic or other emergency. These Requirements    91.060.50
                                                          do not pertain to the fire-retardant classification of a door and releasing-device assembly.




                                                                                                                                                                                            Page 30 of 39
                                                                                    CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                           AND OTHER RECOGNIZED DOCUMENTS
                                                                                  CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                          ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                         ABSTRACT                                                                                                               ICS CODE    PRICE (CDN)

ULC/ORD-C312-07         Check Valves for Fire         These requirements cover check valves of NPS 1 and larger sizes, used in piping systems supplying water                13.220.20     $130.00
                        Protection Service            for fire protection service.                                                                                           23.060.50

                                                      The check valves covered by these requirements are intended for installation and use in accordance with
                                                      the Standards for:
                                                      a) Low-, Medium-, and High-Expansion Foam, NFPA 11;
                                                      b) Installation of Sprinkler Systems, NFPA 13;
                                                      c) Installation of Standpipe and Hose Systems, NFPA 14;
                                                      d) Water Spray Fixed Systems for Fire Protection, NFPA 15;
                                                      e) Installation of Foam-Water Sprinkler and Foam-Water Spray Systems, NFPA 16;
                                                      f)   Installation of Stationary Pumps for Fire Protection, NFPA 20;
                                                      g) Water Tanks for Private Fire Protection, NFPA 22; and
                                                      h) Installation of Private Fire Service Mains and Their Appurtenances, NFPA 24.

                                                      Check valves covered by these requirements are intended for installation and use in accordance with,
                                                      but not limited to the National Fire Code of Canada (NFC), and the National Building Code of Canada (NBC).
                                                      .

ULC/ORD-C321-03         Pipeline Strainers            These requirements cover pipeline strainers for fire protection service. These devices are intended for use in fire    13.220.20     $110.00
                                                      service systems such as sprinkler systems installed in accordance with the Standard for the Installation of
                                                      Sprinkler Systems, NFPA 13, and fixed water spray systems installed in accordance with the Standard for Water
                                                      Spray Fixed Systems for Fire Protection, NFPA 15, where protection against clogging of water discharge is
                                                      needed.


ULC Subject C331-1975   Guide for the Investigation   These requirements cover complete self-contained strainer or filter assemblies intended for use with designated        71.040.20     $110.00
                        of Strainers for Flammable    flammable fluids and anhydrous ammonia (fertilizer grade) in residential and commercial fuel burning,                   75.200
                        Fluids and Anhydrous          dispensing, and handling facilities. Although these devices are designated "strainers", they may be either
                        Ammonia                       strainers or filters according to the common terminology of the industry.

ULC Subject C343-1975   Guide for the Investigation   These requirements cover pumps that are intended to be used as part of oil-burning appliances or installed in            23.080      $110.00
                        of Pumps for Oil-Burning      fuel-oil piping systems serving such equipment. Oil-burning appliance pumps are classified as either                   27.060.10
                        Appliances                    automatic or power-operated.

ULC Subject C352-1975   Guide for the Investigation   These requirements cover constant-level oil valves that are intended to be used in fuel-oil handling or burning         23.060       $110.00
                        of Constant-Level Oil         equipment. They also apply to constant-level valves intended for use at or near a supply tank to maintain a             75.200
                        Valves                        constant head of oil for gravity feed to burner equipment requiring uniform oil pressure to be maintained in its
                                                      supply line.


ULC/ORD-C376-1995       Fire Growth of Foamed      This document describes the test method used to determine the contribution to fire growth                                 13.220.40     $110.00
                        Plastic Insulated Building provided by a thermoset or thermoplastic foamed plastic insulated building panel using a                                    19.020
                        Panels in a Full-Sale Room specified ignition source.                                                                                                83.080.20
                        Configuration
ULC SUBJECT C378-1975   Guide for the Investigation   These requirements apply to the design and construction of draft equipment intended to assist in maintaining the       27.060.10     $110.00
                        of Draft Equipment            desired combustion chamber draft in heating appliances. Draft equipment classifications include draft regulators,
                                                      automatic damper controls, and draft fans for inducing draft.


ULC/ORD-C386-1990       Flame Detectors               These requirements cover the design, construction and performance of Flame Detectors rated at 300 V or less.           13.220.20     $110.00
                                                                                                                                                                              13.320
ULC/ORD-C393-1995       Indicating Pressure Gauges These requirements cover indicating pressure gauges of the elastic element type for use with sprinkler or                 13.220.20     $110.00
                        for Fire Protection Service standpipe equipment for fire protection service. The nominal sizes of gauges covered by these                            23.060.40
                                                    Requirements are 90 and 115 mm. The gauges covered by these Requirements are primarily intended
                                                    for installation and use in accordance with the Standards for: Installation of Sprinkler Systems, NFPA
                                                    13; Installation of Standpipe and Hose Systems, NFPA 14; and Installation of Private Fire Service
                                                    Mains and Their Appurtenances, NFPA 24.

ULC Subject C395-1975   Guide for the Investigation   These requirements cover fuel tanks which may be mounted outside the frame or in other exposed locations on            23.020.20     $110.00
                        of Automotive Fuel Tanks      gasoline or diesel engine powered trucks, tractors, or trailers.

ULC Subject C404-1974   Guide for the Investigation   These requirements cover indicating pressure gauges of the elastic element type usually employed in the high-            17.100      $110.00
                        of Gauges, Indicating         pressure side of regulators or reducing valves used on compressed gas containers or cylinders of oxygen,               23.020.30
                        Pressure for Compressed       hydrogen, nitrogen, and other gases. Such gauges usually have pressure ranges of 0 - 1500, 0 -2000, 0 - 3000,
                        Gas Service                   or 0 - 4000 pounds per square inch (psi).


ULC Subject C407-1974   Guide for the Investigation   These requirements cover equipment for manifolding high-pressure gas cylinders to supply gas for various               23.020.30     $110.00
                        of High Pressure Gas          industrial and commercial applications.                                                                                 23.060
                        Manifolds
ULC Subject C410-1962   Guide for the Investigation   This document is a guide for the Investigation of Floor Coating and Finishing Materials for friction characteristics   91.060.30     $110.00
                        of Floor Coating and          and additionally, fire resistance for oil and grease absorbents..
                        Finishing Materials
ULC/ORD-C410A-1994      Absorbents for Flammable      These requirements cover products intended to be used to absorb leaked or spilled flammable or combustible                NA         $110.00
                        and Combustible Liquids       liquids to reduce the fire hazard from the exposed products and to assist in their disposal.

ULC/ORD-C441-M1990      Pellet Vents                  These requirements are intended to cover the investigation of pellet vents for use in residential dwellings for the    91.140.30     $110.00
                                                      venting to the outdoors of the products of combustion from certified automatic wood or corn pellet fuelled
                                                      appliances.

ULC/ORD-C441.3-1998     Gas Vent Connectors           These requirements cover gas vent connectors intended for use with gas-fired appliances equipped with draft            27.060.20     $110.00
                                                      hoods that produce flue gas temperatures not exceeding 245°C.                                                          91.140.30

ULC Subject C448-1979   Guide for the Investigation   These requirements apply to horizontal split case, end suction, vertical inline and turbine type centrifugal pumps     13.220.20     $110.00
                        of Pumps for Fire             for use in water supply systems for fire-protection service.                                                           23.100.10
                        Protection Service
ULC/ORD-C448A-1979      Guide for the Investigation   These requirements cover the design, construction and performance of diesel engines intended for driving               13.220.30     $110.00
                        of Diesel Engines for         centrifugal fire pumps.                                                                                                 27.020
                        Driving Centrifugal Fire
                        Pumps                         Engines meeting these requirements are capable of being installed in accordance with the Standard of the
                                                      National Fire Protection Association for the Installation of Centrifugal Fire Pumps, NFPA 20.

ULC/ORD-C488-1995       Remote Burglar Alarm          This ORD covers requirements applicable to remote burglar alarm signalling centres such as satellite centres,             NA         $110.00
                        Signalling Centres            signal processing centres and bridging centres.

                                                      Signals received from Residential, Commercial and Financial burglar alarm systems may be transmitted
                                                      directly to a central or monitoring station or by way of a satellite centre and/or a signal processing centre
                                                      and/or a bridging centre.




                                                                                                                                                                                          Page 31 of 39
                                                                                      CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                             AND OTHER RECOGNIZED DOCUMENTS
                                                                                    CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                            ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.    TITLE                          ABSTRACT                                                                                                                  ICS CODE    PRICE (CDN)

ULC/ORD-C501-01          Adhesives for Use in           This Document describes the test method used to determine the adhesion qualities and fire hazard of adhesives                NA         $110.00
                         Heating and Cooling            used in heating and cooling appliances to secure insulation.
                         Appliances to Secure
                         Thermal Insulation
                         Materials
ULC Subject C525-1975    Guide for the Investigation    These requirements cover flame arresters for use in open vent pipes, flame arresters for use with vent valves,             13.220       $110.00
                         of Flame Arresters for Use     and combination flame arrester-vent valves, all intended for use on vents of storage tanks for petroleum oil
                         on Vents of Storage Tanks      and gasoline. These requirements also cover flame arresters for oil tanker ships.
                         for Petroleum Oil and
                         Gasoline
ULC/ORD-C536-1998        Flexible Metallic Hose         These requirements cover flexible metallic hoses having nominal inside diameters of not more than 100 mm                  23.040.70     $110.00
                                                        intended for use in piping systems carrying designated liquefied and compressed gases, including anhy-
                                                        drous ammonia, and flammable and combustible liquids, at pressures not exceeding 3450 kPa and temper-
                                                        atures not greater than 230°C nor lower than minus 40°C. These requirements do not apply to gas appliance
                                                        connectors for handling fuel gases at 35 kPa or less nor to metallic hose intended for use in oil transportation,
                                                        petroleum refinery, or gas transmission and distribution piping systems.


ULC Subject C539-1973    Guide for the Investigation    These requirements cover heat actuated mechanically operated single- and multiple-station fire alarm devices              13.220.20     $110.00
                         of Fire Alarm Devices,         intended for indoor installation in accordance with the Standard for Household Fire Warning Systems, NFPA                  13.320
                         Single and Multiple Station,   No. 74. The requirements do not cover electrically operated single- or multiple-station fire alarm devices
                         Mechanically-Operated          actuated by heat, smoke, or combustion products.
                         Type

ULC Subject C558-1975    Guide for the Investigation    These requirements cover the fire-hazard aspects of industrial trucks with internal-combustion engines, such as            53.060       $110.00
                         of Internal Combustion         tractors, platform-lift trucks, fork-lift trucks, and other specialized vehicles for industrial use. These requirements
                         Engine-Powerd Industrial       do not cover other possible hazard aspects of such equipment.1.2These requirements do not cover farm or road
                         Trucks                         vehicles or automotive vehicles for highway use.


ULC Subject C565-1975    Guide for the Investigation    These requirements cover liquid-level gauges and indicators for anhydrous ammonia and liquefied petroleum                  17.040       $110.00
                         of Liquid Level Gauges and     gas (LP-Gas) for use with pressure vessels in non-refrigerated systems in installations covered by the
                         Indicators for Anhydrous       following Standards: ANSI K61.1, Storage and Handling of Anhydrous Ammonia; ANSI Z106.1, Storage
                         Ammonia and LP-Gas             and Handling of Liquefied Petroleum Gases (NFPA No. 58); NFPA No. 59, Storage and Handling of
                                                        Liquefied Petroleum Gases at Utility Plants
ULC Subject C567-1974    Guide for the Investigation    These requirements cover swivel connectors, pipe-connecting fittings of the threadless compression type, and              23.040.60     $110.00
                         of Pipe Connectors for         hose-pipe connectors. The guide covers connectors and fittings used in specific services.
                         Flammable Liquids and LP-
                         Gas
ULC Subject C583-1974    Guide for the Investigation These requirements cover the fire-, electric-shock, and explosion-hazard aspects of electric battery powered                  53.060       $110.00
                         of Electric Battery Powered industrial trucks such as tractors, platform-lift trucks, fork-lift trucks, and other specialized vehicles for
                         Industrial Trucks           industrial use. These requirements do not cover other possible hazard aspects of such equipment.

ULC Subject C634-M1986   Guide for the Investigation    These requirements cover connectors and switches for use with burglar-alarm systems in mercantile premises,                 13.320      $110.00
                         of Connectors and              mercantile safes and vaults, bank safes and vaults, and residences.                                                         19.080
                         Switches for Use with                                                                                                                                    29.120.20
                         Burglar Alarm Systems                                                                                                                                    29.120.40
                                                                                                                                                                                   97.180
ULC Subject C644-1975    Guide for the Investigation These requirements cover aboveground, underground, and interchangeable (aboveground or underground)                          23.020.10     $110.00
                         of Container Assemblies for stationary container assemblies for liquefied-petroleum gases which consist essentially of any of the following
                         LP Gas                      hydrocarbons or mixtures of them: propane, propylene, butanes (normal butane or isobutane), and butylenes.
                                                     These container assemblies are provided with tanks constructed under the appropriate provisions of the
                                                     Code for the Construction and Inspection of Boilers and Pressure Vessels, CSA B51.


ULC Subject C644A-1980   Preliminary Standard for       These requirements cover the construction and test requirements of propane fuel system components for use on              75.160.30     $110.00
                         Propane Components,            or for the conversion of automotive type equipment. These requirements do not cover propane components for
                         Automotive Type                use in stationary or nonautomotive applications


ULC Subject C668-1975    Guide for the Investigation    These Requirements cover the design and construction of angle-pattern and straightway-pattern hose valves                 13.220.20     $110.00
                         of Hose Valves for Fire-       ntended for use on standpipes, fire pumps, and hydrants supplying water for fire-protection service.                      23.040.70
                         Protection Service                                                                                                                                        23.060
ULC Subject C710-1980    Preliminary Standard for       These requirements cover grease extractors for exhaust ducts intended for placement over restaurant-type                  91.140.30     $110.00
                         Grease Extractors for          cooking equipment, such as ranges, broilers, deep-fat fryers, grills, etc.                                                97.040.20
                         Exhaust Ducts
ULC/ORD-C719(S)-1998     Requirements for the           These requirements cover non-metallic sheathed cable staples intended to be installed by means of a stapler and           21.060.70     $110.00
                         Investigation of Stapler       employed in accordance with the requirements of the Canadian Electrical Code, Part I.
                         Installed Non-Metallic
                         Sheathed Cable Staples
ULC Subject C752A-1975   Guide for the Investigation    These requirements cover materials, devices, and fixtures used to form bullet-resisting barriers designed to                 NA         $110.00
                         of Bullet-Resisting Glazing    protect against robbery or holdup. Electrically operated equipment such as teller's fixtures using electrically
                         Material                       driven deal trays or package passers, intercommunication, and other electrical equipment are also examined
                                                        and tested with respect to fire, casualty, and shock hazards in addition to the equipment's bullet-resisting
                                                        properties.

ULC Subject C753-M1986   Guide for the Investigation    These requirements cover alarm accessories for automatic water supply control valves for use in automatic                 13.220.20     $110.00
                         of Alarm Accessories for       sprinkler equipment for fire-protection service. Accessories may include water motors and gongs,                            13.320
                         Automatic Water-Supply         pressure-operated switches, and other electrical and non electrical attachments, components, or units                       19.080
                         Control Valves for Fire        commonly used with alarm, dry-pipe, deluge and pre-action valves.                                                         91.140.60
                         Protection Services
ULC Subject C779-1975    Guide for the Investigation    These requirements cover electrically conductive floorings of the completed or finished type intended for use in           13.100       $110.00
                         of Electrically Conductive     industrial plants, hospital operating rooms, and similar locations where it is necessary for safety to avoid the          91.060.30
                         Floorings                      accumulation of static electricity. These requirements do not cover electrically conductive equipment and                  91.180
                                                        materials for use in flammable anaesthetizing locations.


ULC Subject C789-1975    Indicator Posts for Fire       These requirements cover indicator posts, including wall and underground types, for use in operating valves of            13.220.20     $110.00
                         Protection Service             the inside-screw pattern and for indicating the position of the gates in such valves. Indicator posts are primarily
                                                        intended for use with valves controlling water supplies to automatic sprinkler equipment, standpipes, etc., used
                                                        in private fire service where connections enter buildings.



ULC/ORD-C790.4-1996      Roof Drains                    These requirements cover combustible and noncombustible roof drains and strainer domes for use in new and                 91.060.20     $110.00
                                                        retrofit roof construction.

ULC Subject C793         Guide for the Investigation    This guide provides guidance covering design and construction, practicality, durability, reliability of operation         91.140.30     $110.00
                         of Automatically Operated      and uniformity of Automaticallly Operated Smoke and Heat Roof Vents. It is a guide only and is not intended
                         Smoke and Heat Roof            as a complete or final set of specifcations to determine etiher acceptance or the manufacturers development
                         Vents                          of his product.




                                                                                                                                                                                               Page 32 of 39
                                                                                     CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                            AND OTHER RECOGNIZED DOCUMENTS
                                                                                   CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                           ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.    TITLE                         ABSTRACT                                                                                                                 ICS CODE    PRICE (CDN)

ULC Subject C796-1974    Guide for the Investigation   These requirements cover Printed-Wiring Boards that are intended for use in electric equipment                            31.180       $110.00
                         of Printed-Wiring Boards
ULC Subject C822-M1982   Guide for the Listing and     This Guide describes the method by which Underwriters' Laboratorires of Canada, (ULC), conducts the initial              13.220.30     $110.00
                         Labelling of Fire             investigation of a pumper manufacturer's fabrication and testing facitities and the procedure subsequently                43.160
                         Department Pumpers            followed by ULC in conducting routine performance tests at the factory on fire department pumpers intended
                                                       to bear ULC label. The complete investigation and performance test programme outlined herein is based
                                                       on the Standard for Automobile Fire Fighting Apparatus (ULC-S515-M1981)



ULC Subject C842-M1984   Guide for the Investigation   These requirements cover valves that are intended to be used for the control of flammable and combustible                 23.060       $110.00
                         of Valves for Flammable       liquids.
                         and Combustible Liquids       They are of the type commonly used in piping systems and in fuel burning equipment. Valves covered by this
                                                       Guide
                                                       are for use with liquids which are handled at temperatures within the range of -29°C to +52 °C. These
                                                       requirements
                                                       cover valves of the manually operated, pressure operated or temperature operated types, or combinations of such
                                                       to the exclusion of types operated wholly or partially by electricity. They may form part of an assembly which
                                                       provides for additional functions or service, the requirement for which are outside the scope of these
ULC/ORD-C887-00          Timelocks                     These requirements cover time controlled locks intended for attachment on vault doors, on the doors of security             NA         $110.00
                                                       containers, and the like, to provide a means for locking the door for a predetermined length of time as protection
                                                       against burglary, robbery or coercive action, such as forcing combination or key holders to release their locks.



ULC Subject C901-1975    Teller’s Lockers              These requirements cover tellers' lockers intended for convenient deposit and storage under timelock of excess            03.060       $110.00
                                                       funds which might otherwise accumulate and be exposed openly on cashiers' or tellers' counters during an at-              13.310
                                                       tempted robbery. Tellers' lockers may consist of a reserve cash compartment only, a combination cash drawer
                                                       and reserve compartment in a single unit, or an assembly of these and other units necessary to the proper
                                                       handling of funds during business hours.



ULC Subject C904-M1987   Guide for the Investigation   These requirements cover construction and operation of vehicle alarm systems intended for use on motor trucks,             13.310      $110.00
                         of Vehicle Alarm Systems      trailers, and passenger cars, to protect against holdup, theft of contents, and with the exception of passenger          43.040.20
                         and Units                     cars, unauthorized movement of the vehicle.


ULC/ORD-C924-02          Photoluminescent and Self These requirements cover emergency self-luminous exit signs and photoluminescent exit signs for use in                          NA         $110.00
                         Luminous Exit Signs       ordinary locations. Such equipment is intended to provide self-luminous exit and or direction indicators
                                                   in the event of failure of the normal supply or in the event of accident to elements of a system intended
                                                   to supply, distribute, and control power and illumination essential to safety of human life.

                                                       These requirements cover self-luminous and photoluminescent exit signs intended for installation as
                                                       required by the authorities having jurisdiction.

                                                       These requirements do not cover unit equipment for emergency lighting which are investigated under
                                                       CSA Standard C22.2 No. 141, Unit Equipment for Emergency Lighting, and electrically-operated exit
                                                       signs which are investigated under CSA 860, Performance of Internally Lighted Exit Signs

                                                       These requirements do not cover low-level path marking and lighting systems. Such equipment is
                                                       covered by UL 1994, Standard for Low Level Path Marking and Lighting Systems.




ULC/ORD-C959-1993        Chimneys, Industrial 540°C These are factory-built industrial chimneys intended for use with certain process equipment and large oil or gas            91.060.40     $110.00
                         and 760°C                  burning building heating appliances normally producing flue gas temperatures of 540°C or 760°C, or less as
                                                    applicable.

ULC/ORD-C971-2005        Nonmetallic Underground       These requirements cover primary carrier, secondary containment, integral primary/secondary containment,                   75.2        $140.00
Including Errata 1       Piping for Flammable and      normal vent and vapour recovery, nonmetallic pipe, fittings, and systems (products) intended for use underground
                         Combustible Liquids           in the distribution of petroleum-base flammable and combustible liquids, alcohols, and alcohol-blended fuels as
                                                       identified in this document. The products covered by these requirements are intended for installation and use in
                                                       accordance with the regulations of the Authority Having Jurisdiction and the following documents: A) National Fire
                                                       Code of Canada; B) CSA B139, Installation Code for Oil-Burning Equipment; and C) Environmental Code of
                                                       Practice for Aboveground and Underground Storage Tank Systems Containing Petroleum and Allied Petroleum
                                                       Products (CCME EPC-LST-61E).
                                                       These requirements cover nonmetallic thermoplastic (flexible) and thermoset (rigid) plastic piping with
                                                       manufacturer-supplied fittings for underground use only. The products covered by this document have been
                                                       evaluated for assembly in normal soil applications by qualified persons in accordance with the manufacturer’s
                                                       instructions. The products covered by this document have not been evaluated for applications in sumps [more
                                                       than 305 mm (12 in) from sump wall], as connector pipe (between underground pipe and dispensing device),
                                                       aboveground or marine use, or other applications exceeding ambient temperatures of 23°C (75°F).
ULC/ORD-C996.1-2000      Polyvinylidene Fluoride       These requirements cover polyvinylidene fluoride corrosive drainage system applications. Requirements for                   NA         $110.00
                         (PVDF) Corrosive Drainage     materials of construction, pipe and fittings are included. This Document is intended for the evaluation of
                         Systems                       corrosive drainage systems in Schedule 40 and 80 ISP, and SDR 21 pipe sizes.
ULC/ORD-C996.2-01        Grease Interceptors           These requirements cover shop fabricated grease interceptors intended to collect and separate organic grease                NA         $110.00
                                                       and/or oil from water to the degree as determined by the requirements herein at an inlet concentration not
                                                       exceeding 12 000 mg/L.

ULC Subject C1023-1974   Burglar Alarm System          These requirements cover household burglar alarm system units intended for use in residences.                             97.180       $110.00
                         Units, Household
ULC Subject C1037-M88    Guide for the Investigation   These requirements apply to the construction, performance and operation of equipment intended to provide                  13.310       $110.00
                         of Anti-theft Alarms and      antitheft protection.
                         Devices
ULC/ORD-C1058.5-2004     Halon and Halocarbon          These requirements cover the construction and performance of Halons 1301, 1211 and halocarbon clean agent                  13.020      $140.00
                         Clean Agent Recovery and      recovery and reconditioning equipment intended for use in: A) recovering Halons 1301, 1211 or halocarbon clean           13.220.10
                         Reconditioning Equipment      agent from fire extinguishing system containers and removing contaminants; or B) recovering and transferring
                                                       Halons 1301, 1211 or halocarbon clean agent from fire extinguishing system containers without removal of
                                                       contaminants. The equipment is intended for indoor use in a commercial halon or halocarbon clean agent system
                                                       servicing or reconditioning facility. These requirements cover (1) products intended for permanent connection to
                                                       600 V or lower potential circuits, and (2) products intended for cord connection to 300 V or lower potential circuits.
                                                       The cord connection, where one is used, and the electrical components and system within the product shall
                                                       comply with the CSA C22.1-02, Safety Standard for Electrical Installations, Canadian Electrical Code, Part I.




                                                                                                                                                                                             Page 33 of 39
                                                                                   CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                          AND OTHER RECOGNIZED DOCUMENTS
                                                                                 CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                         ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                         ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

ULC/ORD-C1058.5-2004    Matériel de récupération et   Ces exigences couvrent la construction et le rendement du matériel de récupération et de remise en état des             13.020      $140.00
                        de remise en état des         agents propres à l'halocarbure et du halon 1301 et 1211 conçu pour : A) récupérer le halon 1301, 1211 ou les          13.220.10
                        agents propres à              agents propres à l'halocarbure des récipients des systèmes d'extinction d'incendie et en éliminer les contaminants;
                        l'halocarbure et au halon     B) récupérer et transférer le halon 1301, 1211 ou les agents propres à l'halocarbure des récipients des systèmes
                                                      d'extinction d'incendie sans éliminer les contaminants. Le matériel est conçu pour une utilisation intérieure dans
                                                      une installation de remise en état ou d'entretien des agents propres à l'halocarbure. Ces exigences couvrent (1)
                                                      les produits conçus pour un branchement continu à un circuit d'un potentiel de 600 V ou moins et (2) les produits
                                                      conçus pour être branchés au moyen d'une rallonge à un circuit d'un potentiel de 300 V ou moins. La rallonge, s'il
                                                      y a lieu, ainsi que les composants et le système électriques du produit doivent satisfaire à la Norme de sécurité
                                                      relative aux installations électriques, Code canadien de l'électricité, partie I.




                                                                                                                                                                                         Page 34 of 39
                                                                                       CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                              AND OTHER RECOGNIZED DOCUMENTS
                                                                                     CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                             ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.    TITLE                           ABSTRACT                                                                                                            ICS CODE    PRICE (CDN)

ULC/ORD-C1058.18-2004    The Servicing of Halon and These requirements apply to companies involved in the charging, recharging, maintenance, repair, inspection              03.080.10     $140.00
                         Clean Agent Extinguishing and decommissioning of halon and clean agent extinguishing systems and equipment, including the recovering                13.220.10
                         Systems                    and reconditioning of the halon and halocarbon clean agent. These requirements apply to the servicing of Halon
                                                    1301 and halocarbon clean agent systems. These requirements do not apply to the servicing of carbon dioxide
                                                    systems or portable fire extinguishers. The servicing of Portable Fire Extinguishers is covered in the Standard
                                                    for the Regulation of the Servicing of Portable Fire Extinguishers, CAN/ULC-S532.



ULC/ORD-C1058.18-2004    Entretien des systèmes       Ces exigences s'appliquent aux entreprises du domaine du chargement, du rechargement, de l'entretien, de la            03.080.10     $140.00
                         d'extinction au halon et aux réparation, de l'inspection et de la mise hors service du matériel et des systèmes d'extinction au halon et aux        13.220.10
                         agents propres               agents propres, y compris la récupération et la remise en état du halon et des agents propres à l'halocarbure.
                                                      Ces exigences s'appliquent à l'entretien des systèmes au halon 1301 et aux agents propres à l'halocarbure.
                                                      Ces exigences ne s'appliquent pas à l'entretien des systèmes d'extinction au dioxyde de carbone ni aux
                                                      extincteurs portatifs. L'entretien des extincteurs portatifs est traité dans la publication Norme pour la réglement-
                                                      ation de l'entretien des extincteurs portatifs, CAN/ULC-S532.

ULC/ORD-C1076-M1986      Proprietary Burglar Alarm       These requirements apply to the construction, performance and operation of equipment intended for use in             13.310       $110.00
                         Units and Systems               proprietary burglar alarm units and systems employed to protect against burglary.
ULC Subject C1091-1974   Preliminary Standard for        These requirements cover the design, construction and performance of butterfly valves for use in fire protection    13.220.20     $110.00
                         Butterfly Valves for Fire       systems.                                                                                                             23.060
                         Protection Service
ULC/ORD-C1254.6-1995     Fire Testing of Restaurant      These requirements cover the performance during fire tests of pre-engineered fire extinguishing system units        13.220.10     $110.00
                         Cooking Area Fire               intended for the protection of restaurant cooking areas.                                                            13.220.40
                         Extinguishing System Units

ULC/ORD-C1254.18-1995    The Servicing of                These requirements apply to companies involved in the installing, recharging, maintenance, repair, inspection and   03.080.10     $110.00
                         Restaurant Cooking Area         decommissioning of restaurant cooking area extinguishing systems and equipment.1.2 These requirements apply         13.220.10
                         Extinguishing Systems           to the servicing of wet chemical and dry chemical systems.

ULC/ORD-C1258-03         Piping and Couplings,        This document specifies requirements for polyvinyl chloride (PVC) pressure pipe, couplings, and gaskets for use        13.220.20     $110.00
                         Polyvinyl Chloride (PVC) for in underground, nonpotable fire service systems and connections to such systems. The pipe is either the
                         Underground Fire Service distribution or transmission type.Distribution pipe covered by these requirements and Class/Pressure rated
                                                      100, 150, and 200 for working pressures of 690, 1030 and 1380 kPa, respectively, and has a nominal inside
                                                      diameter of 100 to 300 mm. Transmission pipe covered by these requirements and Class/Pressure rated 100,
                                                      125, 160, 165, 200 and 235 for working pressires of 690, 860, 1100, 1140, 1380 and 1620 kPa, respectively,
                                                      and has a nominal inside diameter of 350 to 900 mm.



ULC Subject C1275-1984   Guide for the Investigation     These requirements cover storage cabinets for flammable liquid containers which are intended for the storage of     23.020.01     $110.00
                         of Storage Cabinets for         flammable liquid and permitted by the relevant sections of the National Fire Code of Canada.
                         Flammable Liquid
ULC/ORD-C1474-03         Adjustable Drop Nipples for     This standard covers adjustable pipe nipples intended for use with sprinklers to permit adjustment of the           13.220.20     $110.00
                         Sprinkler Systems               distance of the sprinkler from the sprinkler system branch line.
ULC/ORD-C1482-M1990      Space Heaters for Use           These requirements are intended to cover the investigation of automatically fuelled heaters burning particulate     91.140.20     $110.00
                         With Particulate Solid          solid fuels.
                         Fuels
ULC/ORD-C1703 -01        Flat Plate Photovoltaic         These requirements cover flat-plate photovoltaic modules and panels intended for installation on or integral with      NA         $110.00
                         Modules and Panels              buildings, or to be free-standing (that is, not attached to buildings), in accordance with CSA C22.1, Safety
                                                         Standard
                                                         for Electrical Installations, Canadian Electrical Code, Part 1, and the National Building Code of Canada.These
                                                         requirements cover modules and panels intended for use in systems with a maximum system voltage of 1000 V
                                                         or less.These requirements also cover components intended to provide electrical connection to and mounting
                                                         facilities for flat-plate photovoltaic modules and panels. These requirements do not cover:

                                                         A Equipment intended to accept the electrical output from the array, such as power conditioning units (inverters)
                                                         and batteries;
                                                         B Any tracking mechanism;
                                                         C Cell assemblies intended to operate under concentrated sunlight;
                                                         D Optical concentrators; or
                                                         E Combination photovoltaic-thermal modules or panels.


ULC/ORD-C1713-03         Pressure Pipe and               These requirements cover glass-fiber-reinforced, thermosetting-resin pipe (RTRP) and glass-fiber-reinforced,        13.220.20     $110.00
                         Couplings, Glass Fiber-         plastic-mortar pipe (RPMP), and their couplings. The pipe is for use in underground fire service systems
                         Reinforced, for                 and connections to such systems.Pipe covered by these requirements is designated as Class 100, 150,
                         Underground Fire Service        200, 250, or greater for rated working pressures of 690, 1030, 1380 and 1720 kPa or higher, respectively,
                                                         and has a nominal inside diameter of 100 to 1500 mm.


ULC/ORD-C1767-03         Early Suppression Fast-         These requirements cover early suppression fast response (ESFR) sprinklers intended for installation as part of     13.220.20     $110.00
                         Response Sprinklers             sprinkler systems for fire-protection service. Requirements for installation and use of ESFR sprinklers are
                                                         included in the Standard for the Installation of Sprinkler Systems, NFPA 13

ULC/ORD-C2043-0          Fire Test for Smoke and         This is a fire test method for determining the fire performance response of discrete products (electrical              NA         $110.00
                         Visible Heat Release for        equipment) intended to be installed in air handling spaces, such as above suspended ceilings. These
                         Discrete Products and their     products are subjected to an open flame ignition source and evaluated using a product calorimeter.
                         Accessories Installed in Air-   The purpose of this test is to determine the rate of heat release and the rate of smoke release of the
                         Handling Spaces                 burning product samples as they relate to the requirements for fire-resistant and low-smoke-producing
                                                         characteristics in accordance with the provisions of the Canadian Electrical Code.

                                                         This test method does not provide information on the performance of products in other fire or test
                                                         conditions. This test does not investigate the toxicity of the products of combustion.

                                                         This test does not cover the constructional, electrical, or other performance requirements of the
                                                         product.




                                                                                                                                                                                          Page 35 of 39
                                                                                  CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                         AND OTHER RECOGNIZED DOCUMENTS
                                                                                CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                        ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                       ABSTRACT                                                                                                              ICS CODE    PRICE (CDN)

ULC/ORD-C2024-02        Fire Tests for Optical Fibre These requirements cover the following types of optical fibre cable raceways (OFCR) and fittings designed for use       NA         $110.00
                        Cable Raceway                with optical fibre cables in accordance with CSA 22.1, Safety Standard for Electrical Installations, Canadian
                                                     Electrical Code, Part I:

                                                    A Plenum – Evaluated for installation in buildings required to be of noncombustible construction, in situations
                                                    where raceways penetrate fire separations and in ducts, plenums, or other spaces used for environmental air in
                                                    accordance with CSA 22.1, Safety Standard for Electrical Installations, Canadian Electrical Code, Part I, and the
                                                    National Building Code of Canada as well as for riser and general use applications.

                                                    B Riser – Evaluated for installation in buildings required to be of noncombustible construction and in locations
                                                    where raceways penetrate fire separations in accordance with CSA 22.1, Safety Standard for Electrical
                                                    Installations, Canadian Electrical Code, Part I, and the National Building Code of Canada as well as for general
                                                    use applications.

                                                    C General Use – Evaluated for installation in buildings permitted to be of combustible construction in the National
                                                    Building Code of Canada, except for plenums and where raceways penetrate fire separations.


ULC/ORD-C2351-03        Spray Nozzles for Fire-     These requirements cover automatic and non-automatic (open) type water spray nozzles for installation in              13.220.20     $110.00
                        Protection Service          accordance with the Standard for Installation of Sprinkler Systems, NFPA 13, and the Standard for Water
                                                    Spray Fixed Systems for Fire Protection, NFPA 15. Nozzles are categorized by the discharge coefficient
                                                    "Km" of the orifice, water discharge angle or pattern, type of coating or plating, and other factors that have
                                                    a bearing on their application. Automatic nozzles are also categorized by operating temperature rating.




                                                                                                                                                                                       Page 36 of 39
                                                                                 CATALOGUE OF ULC STANDARDS, SPECIAL PUBLICATIONS
                                                                                        AND OTHER RECOGNIZED DOCUMENTS
                                                                               CATALOGUE DES NORMES ULC, DES PUBLICATIONS SPECIALES
                                                                                       ET DES AUTRES DOCUMENTS RECONNUS


     ULC STANDARD NO.   TITLE                        ABSTRACT                                                                                                 ICS CODE    PRICE (CDN)

                                                LIST OF SPECIAL PUBLICATIONS/LISTE DES PUBLICATIONS SPÉCIALES
                                     FIRE SERVICE RESEARCH COMMITTEE/COMITÉ DE RECHERCHE SUR LES SERVICES D'INCENDIE

FSRC 02 (2001)          Fire Risk Analysis Rating    Provides pertinent information to the protector and the protected as a means of enhancing safety            NA         $110.00
                        System (BOOK AND CD)         from fire in individual properties. It is not intended as a means of assessing community fire safety
                                                     as a whole.

                                                     The further purpose of this rating system is to assist you in analyzing fire risk factors and fire
                                                     protection requirements for particular buildings with a high degree of objectivity that yields a
                                                     numerical rating, and where shortcomings are observed, to identify means of counterbalancing the
                                                     deficiencies. It is not intended to serve as a means of waiving compliance with applicable codes,
                                                     statutes or regulations, nor provide a definitive analysis of the fire hazard of a particular building
                                                     beyond that which is provided for through an assessment against existing codes, statutes or
                                                     regulations.




                                                    LIST OF TECHNICAL SUPPLEMENTS/LISTE DES SUPPLÉMENTS TECHNIQUES
ULC-S601(A) - 2001      Technical                    The following procedures have been developed in response to a request for an acceptable routine          23.020.10     $80.00
ULC-S603(A) - 2001      Supplements for              for the refurbishing of:                                                                                  75.200
                        the Refurbishing of          a) ULC-S603(A) steel underground tanks for flammable and combustible liquids which have been
ULC-S615(A) - 2002
                        Underground and              disinterred and are intended for relocation.
ULC-S630(A) - 2001      Aboveground Tanks
                                                     b) ULC-S615(A) reinforced plastic underground tanks for flammable liquids, which have been
                                                     disinterred and are intended for relocation and
                                                     The following procedures have been developed in response to a request for an acceptable method
                                                     of refurbishing:
                                                     c) ULC-S601(A) steel aboveground horizontal tanks for flammable and combustible liquids and
                                                     d) ULC-S630(A) steel aboveground vertical tanks for flammable and combustible liquids.

                                                     The use of refurbished tanks shall be subject to the approval of the authority having jurisdiction




IDR-PADS536-10-EN       INDIVIDUAL DEVICE            3 Part carbonless forms - Pack of 10 - Individual Device record sheets for (25 per page) for the            NA         $15.00
                        RECORD                       Annual Fire Alarm System verification reports as per CAN/ULC-S536-04 Clause 5.7.1.3, E3.1.
IDR-PADS536-10-FR       FICHE DE DISPOSITIF          Formulaires autocopiants à triple exemplaire – paquet de 10 – fiches du dispositif (25 par page)            NA         $15.00
                                                      pour les rapports de vérification annuelle du réseau avertisseur d'incendie conformément à la
                                                     norme CAN/ULC-S536-04, article 5.7.1.3, annexe E3.1.
IDR-PADS536-20-EN       INDIVIDUAL DEVICE            3-Part carbonless forms - Pack of 20 - Individual Device record sheets for (25 per page) for the                       $25.00
                        RECORD                       Annual Fire Alarm System verification reports as per CAN/ULC-S536-04 Clause 5.7.1.3, E3.1.
IDR-PADS536-20-FR       FICHE DE DISPOSITIF          Formulaires autocopiants à triple exemplaire – paquet de 20 – fiches du dispositif (25 par page)            NA         $25.00
                                                      pour les rapports de vérification annuelle du réseau avertisseur d'incendie conformément à la
                                                     norme CAN/ULC-S536-04, article 5.7.1.3, annexe E3.1.
IDR-PADS537-10-EN       INDIVIDUAL DEVICE            3 Part carbonless forms - Pack of 10 - Individual Device records sheets (25 per page) for                   NA         $15.00
                        RECORD                       CAN/ULC-S537-04 Verfication of Fire Alarm System per Appendix C6.1.
IDR-PADS537-10-FR       FICHE DU DISPOSITIF          Formulaires autocopiants à triple exemplaire – paquet de 10 – fiches du dispositif (25 par page)            NA         $15.00
                                                     pour la norme CAN/ULC-S537-04 Vérification du réseau avertisseur d'incendie conformément
                                                     à l'annexe C6.1.
IDR-PADS537-20-EN       INDIVIDUAL DEVICE            3 Part carbonless forms - Pack of 20 - Individual Device records sheets (25 per page) for CAN/ULC-          NA         $25.00
                        RECORD                       S537-04 Verfication of Fire Alarm System per Appendix C6.1
IDR-PADS537-20-FR       FICHE DU DISPOSITIF          Formulaires autocopiants à triple exemplaire – paquet de 20 – fiches du dispositif (25 par page)            NA         $25.00
                                                     pour la norme CAN/ULC-S537-04 Vérification du réseau avertisseur d'incendie conformément
                                                     à l'annexe C6.1.
RPT-TIS536-EN           FIRE ALARM SYSTEM            3-Part carbonless forms - Full report (14 pages) for Annual Fire Alarm System verification reports.         NA         $18.00
                        ANNUAL TEST &                Clause 5.1.2 of CAN/ULC-S536-04 requires annual inspections and tests of the Fire Alarm System
                        INPECTION REPORT             along with a documented report. These carbonless forms are based on and conform to the
                                                     requirements of CAN/ULC-S536 Appendix E.


RPT-TIS536-FR           FICHE D'INPECTION ET Formulaires autocopiants à triple exemplaire – rapport intégral (14 pages) pour les rapports de                     NA         $18.00
                        D'ESSAI ANNUALS DU vérification annuelle du réseau avertisseur d'incendie. La sous-section 5.1.2 de la norme
                        RESEAU               CAN/ULC-S536-04 exige que le réseau avertisseur d'incendie soit soumis à des inspections
                                             et à des essais annuels et que ceux-ci soient documentés dans un rapport. Ces formulaires
                                             autocopiants reposent sur les exigences de l'annexe E de la norme CAN/ULC-S536 et sont
                                             conformes à celles-ci.
RPT-SVS537-EN           FIRE ALARM SYSTEM 3 Part carbonless forms - Full report (14 pages) as required by CAN/ULC-S537-04                                        NA         $20.00
                        VERIFICATION         verifying that the fire alarm system is installed in conformance with the design
                        REPORTS              and CAN/ULCS524, Standard for the Installation of Fire Alarm Systems, and
                                             performs all of its intended functions as designed.The report conforms to the require-
                                             ments of Clauses 3.1.6, 3.1.7 and 3.2.2 of CAN/ULC-S537-04.
RPT-SVS537-FR           RAPPORTS DE          Formulaires autocopiants à triple exemplaire – rapport intégral (14 pages) requis en vertu de la                    NA         $20.00
                        VERIFICATION DU      norme CAN/ULC-S537-04 permettant de vérifier que le réseau avertisseur d'incendie est installé
                        RESEAU               conformément aux exigences de la conception et de la norme CAN/ULC-S524, Norme sur
                        ADVERTISSEUR         l'installation des réseaux avertisseurs d'incendie et que toutes les fonctions prévues de ces
                                             réseaux sont exécutées conformément à la conception. Le rapport est conforme aux exigences
                                             des sous-sections 3.1.6, 3.1.7 et 3.2.2. de la norme CAN/ULC-S537-04.




                                                                                                                                                                           Page 37 of 39
                                                   SALES POLICY

ORDERS:

ULC Standards and ORDs are available through the ULC On-line store site
http://www.ulc.ca . If the standard or ORD you want is available on-line your bill and
shipment will come from Gilmore Global Logistics. If the standard or ORD you want is
not available through the on-line store you will need to place your order by sending or
bringing in an order form with your payment (credit card or Cheque). The address for
these orders is:

UNDERWRITERS’ LABORATORIES OF CANADA
                        Attn: Publications Department
                        7 Underwriters Road
                        Toronto, ON
                        M1R 3B4

                        TEL: (416) 757-3611 Extension 61744
                        FAX: (416) 757-9540
                        E-mail: publications@ca.ul.com

Canadian orders are subject to GST. ADD QST to all Quebec orders. Add HST to all New Brunswick, Newfoundland and Nova
Scotia orders.

All orders are subject to shipping and handling charges. In addition for orders placed through ULC the following schedule applies:

        Canada                   U.S.A.                  Other Countries

        $12.00/copy              $14.00/copy             $16.00/copy


For orders placed through our web site you will be offered shipping via Federal Express or UPS.

All orders placed through the ULC On-line store are payable by credit card. All orders placed through ULC must be paid by cash,
cheque, money order, Visa or Master Card. Cheques or Money Orders are to be made payable to Underwriters’ Laboratories of
Canada.

RETURNS: No returns will be accepted. All sales are final.

NOTE: ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.


COPYRIGHT. NO REPRODUCTION BY ANY MEANS OF ANY ULC STANDARD, OTHER RECOGNIZED
DOCUMENT OR OTHER PUBLICATION IN WHOLE OR IN PART IS PERMITTED WITHOUT AUTHORIZATION
FROM UNDERWRITERS’ LABORATORIES OF CANADA.

                                                                i
                                               MODALITÉS D'ACHAT

COMMANDES:

Les normes et les ordonnances d'ULC seront offertes dans le magasin en ligne d'ULC à
l'adresse suivante : http://www.ulc.ca. Si la norme ou l'ordonnance que vous recherchez
est disponible en ligne, votre commande et facture proviendront de Gilmore Global
Logistics. Si elles ne sont pas disponibles en ligne, vous devrez faire parvenir ou
présenter un bon de commande accompagné du paiement (carte de crédit ou chèque) à
l'adresse suivante :

LABORATOIRE DES ASSUREURS DU CANADA
                        À l'attention du service des publications
                        7, chemin Underwriters
                        Toronto (Ontario)
                        M1R 3B4

                        Téléphone : (416) 757-3611 poste 61744
                        Télécopieur : (416) 757-9540
                        Courriel: publications@ca.ul.com

Les commandes canadiennes sont assujetties à la TPS. AJOUTER la TVQ aux commandes du Québec.
Ajouter la TVH aux commandes du Nouveau-Brunswick, de Terre-Neuve et de la Nouvelle-Écosse.

Des frais de port et de manutention seront rajoutés à toutes les commandes. De plus, voici la liste des prix pour les commandes
passées au bureau d'ULC :

                Canada                           É.-U.                    Autres pays

           12 $/exemplaire                 14 $/exemplaire               16 $/exemplaire

Les commandes passées par l'entremise du site Web seront expédiées par Federal Express et UPS.

Toutes les commandes passées au bureau d'ULC doivent être payées au comptant, par carte de crédit. Toutes les commandes
passées par le magasin en ligne d'ULC doivent être payées au comptant, par chèque, par mandat-poste, par Visa ou MasterCard.
Tout chèque ou mandat-poste doit être fait à l'ordre des Laboratoires des assureurs du Canada.

RETOUR DE MARCHANDISES : Aucun retour ne sera accepté. Toutes les ventes sont finales.

NOTA : LES PRIX PEUVENT CHANGER SANS PRÉAVIS.

DROITS D'AUTEUR. AUCUNE REPRODUCTION EN ENTIER OU EN PARTIE, PAR UN MOYEN QUELCONQUE, DE
NORMES ULC, DE DOCUMENTS RECONNUS OU DE TOUTE AUTRE PUBLICATION N'EST PERMISE SANS
L'AUTORISATION DES LABORATOIRES DES ASSUREURS DU CANADA.

                                                                    ii

				
DOCUMENT INFO