Injection Mould Design Sample SUMMARYSHEET DATE YOUR ENQUIRY RESPONSE IMPORTANT COMPLETE THE ENCLOSED

Document Sample
Injection Mould Design Sample SUMMARYSHEET DATE YOUR ENQUIRY RESPONSE IMPORTANT COMPLETE THE ENCLOSED Powered By Docstoc
					                                SUMMARYSHEET                     DATE:
                            YOUR ENQUIRY / RESPONSE
IMPORTANT
COMPLETE THE ENCLOSED ANNEXURES AS APPLICABLE TO YOUR "RFQ":
Annexure Page 1 Design Input FOR ASSEMBLIES / FUNCTIONAL MODULES
Annexure Page 2 Press tools
Annexure Page 3 Molds
FROM,                                                   TO,
                                                        Mr.K.S.Ramaprasad / Mr. Anand
                                                        Marketing Division - NTTF Industries Ltd.,
                                                        23/24,Phase-2,Peenya Industrial Area,
                                                        BANGALORE - 560058. INDIA.
                                                        E-Mail:<mktg@nttf.co.in>
NAME OF YOUR COMPANY :
E-MAIL/ WEBSITE:
         NAME :(Mr./Mrs./Ms.)
CONTACT TITLE :
 PERSON
         E-MAIL:                             TEL.:                       FAX:


REF:Req For Qtn(RFQ) No :




ITEM Description:                           QUANTITY Required:


DRG. NO. / PART NO.:                        ISSUE / REV. NO.:


QOUTE FOR: Tools /Mold / Parts Supply       SCOPE OF SUPPLY: Comp.Supply REQD / NOT REQD


TARGET PRICE:                               WHEN Item Required:


PAYMENT TERMS:                              STATUTORY REQT:SPECIFY IF ANY




SPL. INSTRUCTION: (IF ANY) :




PRE-DISPATCH APPROVAL: REQD / NOT REQD.     ACCEPTANCE STANDARDS:


VOLUME REQD. PER YEAR & NO OF LOTS:

RESPONSE Required Before:

ADDITIONAL INFORMATION IF ANY:




AUTHENTICATION BY CUSTOMER REPRESENTATIVE
                                    ANNEXURE 1 DESIGN - INPUT(Products&assemblies )
CUSTOMER NAME:

PRODUCT NAME:                                              CUSTOMER SPECIFICATIONS: YES/ NO

DRAWING No.                                                Revision No.     Date
                                                           APPLICABLE STANDARD: (Give Details)
CUSTOMER SAMPLE:                Yes/No                     NATIONAL / INTERNATIONAL                        CUSTOMER
(If available Please send)                                 SPECIFIC
                                                           COMPANY STANDARD
PRODUCT APPLICATION DETAILS


PRODUCT ACCEPTANCE CRITERIA
                                           Yes/No
SL NO.            TESTS               Give Ref. Std. No.   SL NO.                TESTS
                                      where applicable
                                                                    HIGH VOLTAGE (FLASH)
   1     VISUAL EXAMINATION                                  10
                                                                    TEST
   2     DIMENSION REPORT                                    11     VIBRATION TEST
   3     PERFORMANCE TEST                                    12     DAMP HEAT TEST
                                                                    REPEATED FREE FALL
   4     Milli-Volt DROP TEST(mV)                            13
                                                                    TEST
                                                                    RESISTANCE TO
   5     ENDURANCE TEST                                      14
                                                                    CONTAMINATION TEST
   6     SALT SPRAY TEST                                     15     SHELF LIFE
         INSULATION
   7     RESISTANCE                                          16     OVER LOAD TEST
         TEST
   8     DRY HEAT TEST                                       17     MIS-USE / ABUSE TEST
   9     LOW TEMPERATURE TEST                                18     ANY OTHER TEST



STATUTORY / REGULATORY REQUIREMENT: (Specify if any, have to be complied)




MATING{ Complimentary/Matching} PART DETAILS: Interfacing requirements.




QUANTITY REQUIREMENTS / DELIVERY DETAILS:




Authenticated by Customer's Representative:
Name:                                                                                                   Title /
Designation:                                                                                     Date


REVIEW COMMENTS BY NTTF Industries Ltd.




Reviewed By:                             Date:
                                               DATE:




      CUSTOMER SPECIFICATIONS: YES/ NO

      Revision No.     Date
      APPLICABLE STANDARD: (Give Details)
      NATIONAL / INTERNATIONAL                         CUSTOMER
      SPECIFIC
      COMPANY STANDARD




                                                        Yes/No
                                                   Give Ref. Std. No.
                                                   where applicable




cify if any, have to be complied)




: Interfacing requirements.




ve:
                                                   Title /
                                            Date
                                 ANNEXURE 2 TOOLING
                            CLIENT'S RESPONSE WITH DETAILS
CLIENT                                                              FOR TOOLING REQUIREMENT
                                                NEW            REPLACEMENT               DUPLICATION
                                                SCOPE OF ORDER


                                                WHEN REQUIRED


                  NAME:                                                     TOOL DESCRIPTION
                                                PRESS TOOLS       INJECTION/COMPRESSION /        Pressure Diecasting DIE
  CONTACT         TITLE:                                          TRANSFER/ MOULD
  PERSON
               TELE:
               FAX :                                           2 PLATE / 3 PLATE                 HOT / COLD CHAMBER
                                                  MOLD TYPE
E-MAIL/ WEBSITE:                                               POT / PLUNGER TRANSFER
RFQ REF NO.   :                                 MACHINE DETAILS


WHETHER INFORMATION AVAILABLE WITH YOU, CAN BE MADE AVAILABLE?

                  TOOL DESIGN (For Reference)                     CNC PROGRAMS

                  RAPID PROTO TYPING SAMPLE                       CAD / CAM FILES

                  ANY OTHER PERTINANT
                  INFORMATION


                                                                        NEW REQUIREMENT
WHETHER COMPONENT SUPPLIES REQD? YES / NO
                                                                        NEW SOURCE

CHECKED BY:                                     PREPARED BY:

DATE      :                                     DATE          :



REVIEW BY NTTF
COMPONENT DESCRIPTION
DRAWING NO.
RAW MATERIAL SPECIFICATIONS
RAW MATERIAL WILL BE ARRANGED BY                                              NTTF / CUSTOMER
VOLUME OFFTAKE
VISUAL CHARACTERISTICS OF COMPONENT
SPECIAL CHARACTERISTICS OF COMPONENT
EXECUTION AT                                                             CMD - PEENYA / VELLORE


                                                                        NEW
FOR PRODUCT ORDERS:
                                                                        REPEAT

ENQUIRY REVIEW: DATE:               REF :                         CONTRACT REVIEW: DATE:              REF :
PRODUCT DESCRIPTION
DRAWING / PART NO.
APPLICATION
TEST SPECIFICATIONS AVAILABLE                                                     YES / NO
RAW MATERIAL SPECIFICATIONS AVAILABLE                                             YES / NO
DEVELOPMENT BY                                                            R & D / OTHER SOURCE
BULK SUPPLIES BY                                                            PEENYA / VELLORE
REMARKS:




ENCLOSURES:




CHECKED BY:                                     PREPARED BY:
DATE   :   DATE   :
                    CLIENT'S RESPONSE WITH DETAILS
                  NAME   :                   COMPONENT            :
                  ADDRESS:                   RAW MATERIAL         :
    CLIENT
                                             PRESS              :
                                             TOOL SIZE(L X B X H) :
                NAME:                        NO. OF IMPRESSIONS :
   CONTACT      TITLE:                       PART DESCRIPTION :
   PERSON       TELE:
                FAX :                        PART NO.               :
E-MAIL/ WEBSITE:
RFQ REF NO.   :                              DATE               :
PART DRAWING : HARD COPY                     CAD FILE: 2D               3D       Format


    1. DIE TYPE                   2. PUNCH / DIE STEEL                  3. DIE SET
                  PROGRESSIVE                HCHCR                               DANLEY
                  BLANKING                   OHNS                                CUSTOM BUILT
                  PIERCING                   D2                                  OTHERS
                  COMPOUND                   HSS
                  BENDING                    OTHERS
                  DRAW
                  COMBINATION
                  FINE BLANKING
                  OTHERS

   4. EJECTION                    5. PRESS                              6. SPECIAL FEATURES
                  AIR BLOW                   MECHANICAL                      ANTI JAM MECHANISM
                  FALL THROUGH               HYDRAULIC                       MIS- FEED DETECTOR
                                             DIE CUSHION                      AUTO FEED
                                             TRANSFER

     7. OTHERS
                  DATE CODE
                  PRESSURE PAD




ANY OTHER INFORMATION:




TOOL LIFE EXPECTATION:
                                          MOULD                                                BANGALORE

                     NAME   :                           COMPONENT            :
                     ADDRESS:                           RAW MATERIAL         :
    CLIENT
                                                        PRESS              :
                                                        TOOL SIZE(L X B X H) :
                NAME:                                   NO. OF IMPRESSIONS :
   CONTACT      TITLE:                                  PART DESCRIPTION :
   PERSON       TELE:
                FAX :                                   PART NO.               :
E-MAIL/ WEBSITE:
RFQ REF NO.      :                                      DATE               :
PART DRAWING : HARD COPY                                CAD FILE: 2D               3D           FILE TYPE

  1. MOLD TYPE                           2. CORE CAVITY STEELS                     3. FINISH
              2PLATE W/ SUPPORT PLATES         P20                                 EDM FINISH NO.
              3 PLATE MOLD                     H13                                 TEXTURE NO.
              3 PLATE WITH STRIPPER            D2                                  OTHERS
              2 PLATE MOLD W/ STRIPPER         M-4
              2 PLATE MOLD                     POCERAX-II
                                               AISI 420
                                               OTHERS

  4. MOLD BASE                                  5. EJECTION                        6. OTHERS
              DME OR EQUIVAL                   EJECTOR BLADES                      RECYCLE CODE
              HASCO                            EJECTOR PINS                        DATE CODE
              CUSTOM BUILT                     STRIPPER PLATE                      MOLD CYCLE COUNTER
              OTHERS                           POPPET VALVE                        PRESSURE TRANSDUCER
                                               2 STAGE EJECTION                    EJECTOR BOX SHIELD
                                                HYDRAULIC EJECTIONS
                                                SLEEVE EJECTOR
                                                ANGULAR CORE /
                                                INTERNAL WEDGE


7. RUNNER SYSTEM                             8. GATING TYPE                        9. ENGINEERING
          COLD SPRUE COLD RUNNER              EDGE GATE                            PART SURFACING
          HOT SPRUE COLD RUNNER               CENTRE SPRUE                         DRAFT CHECKING
          HOT SPRUE RUNNER LESS               SUB- GATE                            MOLD DESIGN
          HOT MANIFOLD COLD RUNNER            PIN POINT GATE                       MOLD FILLING ANALYSIS
          HOT SPRUE 3 PLATE                   HOT TIP                              MOLD COOLING ANALYSIS
                                              OTHERS                               SHRINK & WARP ANALYSIS




ANY OTHER INFORMATION:




TOOL LIFE EXPECTATION:

				
DOCUMENT INFO
Description: Injection Mould Design Sample document sample