Tips to Repair Roof Leaks by djsgjg0045


									Water is always damaging if it finds its way through small cracks or loose tiles. Water
can easily penetrate these cracked or loose tiles and cause severe damage to the roof
lining underneath. It is vital to take necessary steps whenever you see a sign of water
penetration in the roof.
  The first thing you need to do in this regard is to look for the source of that leak. You
cannot repair the leak until you find the source. So, you have to do some hard work in
finding the real source of water leak in the roof. Some leaks require little work to
repair while others require professional roofing contractor to repair the problem.
Thoroughly examine the root cause of the leak and if you feel that it requires some
professional work than contact your roofing contractor otherwise you can repair it on
your own.
  Plain Tiles
  If the plain tile is broken or damaged, remove the one above it and break open the
roofing nail. Take a new tile and replace it with a damaged tile carefully and secure it
with the nail. Make sure that you use crowbar cover over the nail head before
hammering it. It will prevent the new tile from damaging.
  Slate Tiles
  Slate tiles often slip out of place. You can easily repair them. To replace the slate,
you have to remove the surrounding slates first in order to remove the damaged slate.
Make certain that you will not harm the roofing material below. Place the replacement
slate on its position and lined it up with the adjacent slates. Use nails to secure it and
replace the surrounding slates as well.
  Flat Felt Roof
  Flat felt roof is more inclined to splitting and blistering. What you need to do is to
take the retractable knife and cut across the blister carefully. Then, apply bitumen
inside the hole. Now, you need to cut the roofing felt almost 5 cm (2 inches) bigger
than the hole. Place this roofing felt on the hole and press it down to seal it against the
bitumen. Later, use bitumen to seal the split and give it some ample time to dry.
  Roof Flashing
  Roof flashing is another option to repair the roof leak. If you find any loose nails on
the roof, simply apply bitumen to seal the holes. If there are any signs of corrosion
holes that are 2 cm wide, you can use roof flashing to patch these holes. You have to
cut a piece from the roof flashing, comparatively larger than the hole. You have to
roughen up the surface so that the bitumen properly sticks to it. Place the patch on the
hole and seal it with the bitumen. Remember, if the damage done by the corrosion is
severe, you need to replace the entire flashing.
  Tips & Warnings
  It is important to find the source of leak first. If you feel that you don’t have the
required skills and equipment to repair the leak, call for professional instead of further
damaging the roof.
  You might be interested in learning about Fittng a Window Box and also Roof Leaks

To top