GW CEILING PANEL OVERLAYS– dAtA ShEEt GlASSwool CEIlING PANEl oVERlAYS Introduction Benefits Bradford Ceiling panel overlays is a lightweight • Lightweight insulation product designed to reduce airborne noise • Easily handled behind perforated ceiling linings. Product is cut to size • Substantially reduces airborne noise to suit ceiling panels. • Cut to size to reduce waste • Has black face so is not easily seen behind perforated Product Description systems Bradford Glasswool Ceiling Panels consists of absorbtion • Provides both Energy and cost savings blankets that are manufactured by spinning molten • Biosoluble material - safe to use glass, containing up to 80% recycled content, into • Approved for use on site by Unions fine wool like fibres. The inorganic fibres are bonded together using a thermosetting resin. The product can Available Facings be identified by its golden appearance and the black Product is faced with a black matt face. This product matt facing. is subject to minimum quantities. Please contact your nearest Bradford sales office with your requirements. Applications Glasswool ceiling panel overlays are generally used to Health and Safety absorb air borne noise. The panels are installed generally This product is manufactured to the latest Fibre Bio- behind perfroated ceiling panel systems and are cut to Soluble (FBS-1) Glasswool formulation and is not size to fit ceiling tiles. classified as hazardous according to the criteria of the Typical applications include partitions in; ASCC (formally NOHSC) guidelines. For further • High rises information refer MSDS sheet on Bradford website. • Office buildings • Restaurants and hotels • Internal fit outs in shopping centres SKU Table Nominal Thickness Nominal Length Nominal Width Nominal Coverage Nominal Coverage Pieces per Pack (mm) (mm) (mm) per Piece (m2) per Pack (m2) 50 1200 600 20 0.7 14.4 Gw CEIlING PANEl oVERlAYS GW CEILING PANEL OVERLAYS– dAtA ShEEt Physical Properties Maximum Service Temperature Glasswool: 350°C • Ignitability: 0 When tested in accordance to AS/ • Spread of flame: 0 Fire Hazard Properties NZS 1530.3:1999 • Heat Evolved: 0 • Smoke Developed: 0 When tested in accordance with BS Corrosion Resistance pH 7.5-8.0 3958.5:1969 When left in an atmosphere of 50°C Moisture Absorption and 95% relative humidity for four Less than 0.2% by volume days Complies with AS/NZ4859.1 AS4859 Compliance “Materials for the thermal insulation Complies of buildings” The insulation material shall be Bradford Glasswool ceiling panel overlays of thickness ( ) mm . For installation specifications refer Sample Specification to the relevant Application Brochure in the Bradford Insulation Building Literature series. Publish date: 06/08 Doc ref: DG-CPOLAY-A CSR Bradford Insulation 55 Stennett Rd, Ingleburn NSW 2565 Australia. Telephone (02) 9765 7000 Facsimile (02) 9765 7002 www.bradfordinsulation.com.au CSR Bradford Insulation is a business division of CSR Building Products Limited ABN 55 008 631 356 The contents of this brochure are copyright protected and may not be reproduced in any form without prior written consent of CSR Bradford Insulation. Recommendations and advice regarding the use of the products described in this brochure are to be taken as a guide only, and are given without liability on the part of the company or its employees. We reserve the right to change product specifications without prior notification, please refer to the Bradford website for the latest version of this document. The purchaser should independently determine the suitability of the product for the intended use and application.