Docstoc

High temperature fans and blowers for operating up to 2_200 F by Canada Blower

Document Sample
High temperature fans and blowers for operating up to 2_200 F by Canada Blower Powered By Docstoc
					Fans handling hot airstreams must have sufficient airflow and be kept in operation
until airstream temperatures cool below 120 F to prevent damage to the fan unit. The
Tubeaxial fan ambient air cooling system is only effective while fan is operating.
  Canada Blower Co. has just increased the operating temperature limit of its unique
line of high temperature fans and blowers for industrial applications to 2200 F. This
was achived by using extremely high strength stainless steel alloys for the fans
impellers, that allow for higher safe speeds at elevated temperatures.
  The Canada Blower high temperature oven fans line now include:
  - Operating up to 2200 F, centrifugal, axial and plug fan types; - Pre-engineered and
custom made fans for all types of applications with vaiety of impeller types and
accessories; - Canada Blower engineers provide a professional advice and recommend
a right fan for every application & oven / plenum design; - The fan offering provides
competitive replacement fans to Garden City, Lau, IGE, Alloy Fabricating fan models;
repairs, re-build & balancing; - Unique high temperature water-cooled motors for
operation up to 2300 F.
  There are two major types of high temperature fans - centrifugal and axial:
  Centrifugal Wheels:
  * Multiblade forward curve wheel. This type of wheel is usually specified where
there is a necessity for large volumes of flow against low to medium static pressure
requirements. The forward curve blade is that it delivers the same volume of air as
either the backward or radial blade wheel, at a lower fan speed, which is important
due to wheel stresses at elevated temperatures. This fan is the most common type used
in all types of heat treatment operations except where a buildup of material on the
blades could occur, as wheel unbalance would result. * Radial Blade, paddle wheel
type fans. This type of wheel is usually specified where there is a necessity for
medium volumes of flow against medium to large static pressures. The paddle wheel
is considered a self cleaning type of wheel. It could be used where there are various
materials or dust in the air stream. Due to its structurally strong design, it is used in
many heat treatment applications at very high temperatures where maximum fan
longevity is desired.
  Axial Blade Wheels:
  * The axial blade wheel is usually specified where there is a need for very large
volumes of flows against low static pressure. Axial wheel like the multi-blade forward
curve type wheel could cause an axial fan to deliver different air volumes at the same
static pressure, if the total pressure requirement of the fan system was underestimated.
This type of fan is ideally suited where a large volume of flow is required with a
minimum of duct work and is used extensively for small and large furnaces, such as
aluminum annealing.
  Fans with ambient air cooling systems handling hot airstreams must have sufficient
airflow and be kept in operation until airstream temperatures cool below 120 F to
prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only
effective while fan is operating.
  For          additional            information          please         refer         to
http://www3.bell.net/olegtechetchel/exhaust_blowers/index.html.
 Oleg     Tchetchel        Process     Air      Engineer      Canadian   Blower
http://www3.bell.net/olegtechetchel/exhaust_blower/index.html
http://www3.bell.net/olegtechetchel/exhaust_fan/index.html

				
DOCUMENT INFO