Vinyl Banner setup

							CANVAS SET UP
                                                                                                i print
INFO SHEET                                                                                        cnr Maud St & Aerodrome Rd
                                                                                                  Maroochydore Q 4558
DIMENSION                                                                                         p   07 5456 6822
Artwork should be created at real size, 1:1 scale .                                               f   07 5456 6811
                                                                                                  e   design@idprint.com.au
FORMAT                                                                                            w   www.idprint.com.au
300 DPI PDF is best.
jepg, tiff also accepted. PSD, Ai and EPS also accepted some charges may apply.
If you are supplying your own artwork and not paying for a file check fee the banner must be paid for in full to
proceed with the order.
There are 2 options for having your Canvas wrapped.




                            Option 1 - Image stops at visible line, with a white wrap. Best if you dont
                            want to lose any of your image, or you might cut an object / person off.




                                                         Option 2 - Image wraps around frame. Best if you have lots of
                                                         background, or you don’t minf losing part of you image. You can
                                                         set up just to print a white wrap, or choose a colour to
                                                         complement your image.



Setting up for Option 1
1.  Work out what you want as your Visible Image Area Size.
2.  Create a new document in Photoshop at the size you have
    chosen at 300dpi.
3. Open the file you want to put on canvas in photoshop.
4. Drag an drop the image you want to print into your new
    empty canvas.
5. Move the image around and scale image until you are happy
    with how it looks on the canvas.
6. Go to Image>Canvas Size> and add 140mm to to your
    canvas width and height.
7. Make sure your background stretches out to the new canvas
    area. NB. You may need to clone some areas or stretch the
    background to ensure it goes all the way to the edge.
8. Right click on Layers Palette> Flatten Image
9. Save as PDF > High Quality Print
    click on compression Tab > check the following boxes                      70mm image wrap


    Do not downsample, Compression should be JPG, Image
    Quality - High.
10. All done

Setting up for Option 2
1.   Follow above up to step no. 5.
                                                                                            Visible Area
2.   Right click on Layers Palette> Flatten Image
3.               Make sure the back ground colour is the colour
                                                                                                            Visible Artwork Area
                 you want the wrap to be.
4.   Go to Image>Canvas Size> and add 140mm to to your
     canvas width and height.
5.   Follow on from step 9 above.                                                                                    Document Page Size