Docstoc

PPI SERVICES

Document Sample
PPI SERVICES Powered By Docstoc
					PPI SERVICES                 PTY LTD



Water Pollution Control Specialist




   ABSORBENT
  CONTAINMENT
       &
WATER TREATMENT
    PRODUCTS
   CATALOGUE
   PPI SERVICES                              PTY LTD
                                             ACN 003 693 123


   HEAD OFFICE                 Phone     (02) 4950 2023
   PO Box 404                  Fax       (02) 4950 2169
   Wallsend NSW 2287           Email     sales@ppiservices.com.au
                               Web       www.ppiservices.com.au




Introduction

Over recent years, increasingly stringent environmental legislation has required industry to
implement a variety of measures to reduce their environmental impacts. Failure to demonstrate
environmental due diligence can not only result in significant fines but also criminal prosecution.

Amongst large corporations, Environmental Management Systems and ISO 14001 are now common
place. Environmental management has become more than a corporate policy to recycle waste paper
and turn off the office lights. There is growing awareness that implementation of practical
environmental solutions can create a sustainable business, increase profit margins and improve
shareholder confidence.

Consistent with this increasing awareness is the demand for environmental products and services.

Although the market for environmental services is well catered for, environmental products remain
more elusive. How many times following an environmental audit have you read a report which
makes various recommendations relating to liquids storage and handling, waste management and
incident response without offering advice on where to find cost effective and practical solutions?

PPI Services Pty Ltd aims to bridge that gap.

This catalogue identifies PPI Services range of sorbents and spill control equipment. The
products outlined have been carefully selected over a number of years and provide the right match of
quality and cost effectiveness.

This catalogue will be regularly updated as we strive to provide better products at a more
competitive price. Thank you for choosing PPI Services Pty Ltd as your preferred
environmental supplier.


REGARDS
PETER ARNOTT
MANAGING DIRECTOR




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Absorbent and Containment Products

                 Product                 General   Oil Only   Hazardous     Page No.
                                         Purpose

Organic Sorbents
  Absorbent GPTM
   Particulate                                                                1
   Pads                                                                       1
   Pillows                                                                    1
   Rolls                                                                      1
   Socks                                                                      1
  Spill-SorbTM
   Particulate / Floor Sweep                                                  2
  Spill-DriTM
   Particulate / Floor Sweep                                                  2
  Absorbent WTM
   Particulate                                                                3
   Pads                                                                       3
   Pillows                                                                    3
   Rolls                                                                      3
   Socks                                                                      3
  Sphag SorbTM
   Particulate                                                                4
  ChemOil-AwayTM
   Particulate                                                                4
Organic Spill Kits*
  General Purpose
   Compact Kit                                                                5
   Vehicle Kit                                                                5
   Portable Case Kit                                                          5
   Utility Box Kit                                                            6
   Small Mobile Kit                                                           6
   Large Mobile Kit                                                           6
  Oil Only
   Compact Kit                                                                7
   Vehicle Kit                                                                7
   Portable Case Kit                                                          7
   Utility Box Kit                                                            8
   Small Mobile Kit                                                           8
   Large Mobile Kit                                                           8
Synthetic Sorbents
  Oil Blotter
   Particulate                                                                9
  MRO PlusTM
   Pads                                                                       9
   Rolls                                                                      9
  Universal PlusTM
   Pads                                                                      10
  UXTTM Universal “Xtra” Tough Sorbent
  Folded Roll                                                                 10
  BattlematTM
   Rolls                                                                     11
  Sorbent Industrial Rug (SIRTM)
   Rolls                                                                     11
  Barrier Spill Matting
   Rolls                                                                     12
  ENVTM Oil Sorbents
   Pads                                                                       12
  SPCTM Oil Sorbents
   Pads                                                                       13
   Booms                                                                      13
   Rolls                                                                      13
  Oil PlusTM Sorbent
   Pads                                                                       14
   Rolls                                                                      14
  Pillows
   Allwik                                                                     15
   Oil Only                                                                   15
   Hazwik                                                                     15
  Drum Top Covers

For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                  Product                  General   Oil Only   Hazardous   Page No.
                                           Purpose
   Allwik                                                                     15
   Oil Only                                                                   15
  Socks
   Allwik                                                                     16
   Oil Only                                                                   16
   Hazwik                                                                     16
  Railway Track Matting
   Centre and Outer Pieces                                                    17
Synthetic Spill Kits*
  General Purpose
   Economy SpillPak                                                           18
   Vehicle SpillPak                                                           18
   Small Mobile SpillPak                                                      18
   Large Mobile SpillPak                                                      18
  Oil Only
   Economy SpillPak                                                           19
   Vehicle SpillPak                                                           19
   Small Mobile SpillPak                                                      19
   Large Mobile SpillPak                                                      19
  Hazardous Chemical
   Economy SpillPak                                                           20
   Vehicle SpillPak                                                           20
   Small Mobile SpillPak                                                      20
   Large Mobile SpillPak                                                      20
Spill Trailers & Containerised Packages
    Spill Trailers                                                          21
    Containerised Packages                                                  21
Spill Kit Accessories
  Drain Protector
   45 x 45 cm                                                               22
   60 x 60 cm                                                               22
   90 x 90 cm                                                               22
   1200 x 1200 cm                                                           22

    Plug & Dyke
    0.25 kg                                                                   22
    0.5 kg                                                                    22

  Portable Containment Bunds*
   648 litre                                                                23
   1,200 litre                                                              23
   2,700 litre                                                              23
   9,600 litre                                                              23
   14,400 litre                                                             23
   21,600 litre                                                             23
   22,500 litre                                                             23
   30,000 litre                                                             23
Speciality Items
  Mercury Kits
   Mercury Amalgamation Powder                                                24
   Small Mercury SpillPak                                                     24
   Large Mercury SpillPak                                                     24
  Kolor-Lock® Neutralizers & Solidifiers                                      25
  Vapour Supressor Spill Kit                                                  25
  Chemical & Waste Water Kit                                                  25
  MEDICLEAN Biohazard Solidifier                                              26
  MEDICLEAN Biohazard Solidifier Kit                                          26
Liquid Handling
  Flexible Bunding                                                             27
  Workstations
   2 Drum                                                                      28
   4 Drum                                                                      28
   6 Drum                                                                      28
   8 Drum                                                                      28
  Spill Pallets
   Poly SpillPallet 3000 with drain                                            29
   Poly Slim-Line 6000 with drain                                              29




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                   Product                        General          Oil Only   Hazardous   Page No.
                                                  Purpose

Spillpal
     2, 4, 6, 8,Drum Spillpal                                                               29a
     Polybund containment Systems
     High density Polyethylene Bunding                                                      29b
     Ramps                                                                                  29b
     Polycrete Bunding                                                                      29c
     Floor Bunding                                                                          29c
     Polycrete Tray Systems                                                                 29d
     Galvaized Tray Systems                                                                 29d

Liquid Storage & Transport
   Flexidams / Buoy Walls*
    1,200 litre                                                                           30
    2,200 litre                                                                           30
    5,000 litre                                                                           30
    10,000 litre                                                                          30
    15,000 litre                                                                          30
    25,000 litre                                                                          30
    40,000 litre                                                                          30
    Helo-Tanks*
    350 litre                                                                             31
    750 litre                                                                             31
    1,000 litre                                                                           31
    1900 litre                                                                            31
Containment Systems (Booms)
   Permanent Floatation Barrier*                                                             33
   Geosynthetic solutions                                                                    34

Notes:
Goods can be purpose built to client’s specification if required




WATER TREATMENT PRODUCTS
                                                                                            35
Oil and Water Separators
                                                                                            36
Key Features
                                                                                            37
MP-6 and MP-12 Separators
                                                                                             38
Bm 64/3 Separator
                                                                                            39 a,b,c
Sydney Water Authorisation
(Separators)
                                                                                            40
ASM Pumps D Series
                                                                                            41
Dolphin Strainers
                                                                                            43
Cetco Wastewater Treatment

                                                                                             44abcd
Pratt Safety Storage Cabinets




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Sorbents
                 TM
Absorbent GP
Absorbent GPTM (General Purpose) is designed to contain and              Organic nature means that the products will
control liquid spills ranging from oil and solvents to non-              readily biodegrade in landfill environments;
aggressive chemicals. It is a patented, cellulose fibre sorbent          Resists compression far better than styrene and
derived from the waste stream of the pulp and paper industry.            vermiculite providing greater protection from
Absorption is via capillary action, encapsulating and retaining          content migration and impact during shipping; and
all liquid thereby preventing secondary spills. It is available          Eliminates abrasion damage that can occur with
as particulate, pads, socks, rolls and pillows. Features of              mineral packaging absorbents.
Absorbent GP include:
     Dust free and contains no known carcinogens;
     Anti-static and static sterile thereby providing an extra
     margin of safety when shipping electrostatic sensitive
     items;
     Passes and exceeds the Toxicity Characteristic Leaching
     Procedure (TCLP), Paint Filter Test and Liquid Release
     Test (LRT);
     Contains no clays, inks or dyes commonly found in
     recycled newsprint that blocks capillary action and slows
     or reduces absorption;



                        ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)       TYPE
Particulate              30001                 50 Litre Bags        This Product Is No Longer Available In This Size
                         30002          10 litre                        Bale/5                     23              
Pads                     34602          40 x 50 cm                      Bale/100                  190              
Pillows                  42011          20 x 45 cm                      Box/20                     76              
                         42012          45 x 45 cm                      Box/10                     76              
Rolls                    36634          80 cm x 50 m                    Roll                      340              
                         36632          40 cm x 50 m                    Roll                      170              
Socks                    33032          7.5 cm x 1.2 m                  Box/10                     68              
                         33033          7.5 cm x 3 m                    Box/6                      83              
   General Purpose             Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Sorbents




Spill-SorbTM is a general purpose particulate, designed as an
environmental alternative to clay. Spill-Sorb is made from
100% reclaimed cellulose fibres that absorb liquids including
oils, solvents, water based liquids, coolants and non-
aggressive chemicals on contact. Absorbed liquids are locked
into the cellulose fibres, preventing leaching and handling
problems associated with clay and diatomaceous earth. Spill-
Sorb offers a number of advantages over Spill-Dri including:
    It is denser and is therefore more suitable in outdoor
    environments where air movement may dissipate the
    sorbent;
    Unlike Spill-Dri it has a natural fire retardancy;
    Although Spill-Dri works well on smooth treated floors,
    Spill-Sorb works better on rough surfaces such as
    concrete.




                         ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Particulate               40032           28 litre                       Bag                       25         
   General Purpose              Oil Only (will not absorb water)      Universal (hazardous chemicals)




Spill-Dri contains and absorbs unwanted liquid spills, and
removes sheen from floors, work surfaces, driveways, etc
and, like Spill-Sorb, is designed as an alternative to clay-
type industrial floor absorbents. Spill-Dri is made from
100% reclaimed natural cellulose fibre and absorbs
liquids ranging from oils and solvents to water and non
aggressive chemicals. Absorption is via capillary action,
and, as such, the absorbed liquid is locked into the
cellulose fibre, thereby preventing leaching and handling
problems. Spill-Dri incorporates ground walnut shells
which act to remove the sheen from spills following
clean-up.



                         ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Particulate               30006           25 litre                       Bag                       21         
                          30008           6 litre                        Box/18                    22         
   General Purpose              Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Sorbents
                 TM
Absorbent W
Absorbent WTM is designed to contain and
control hydrocarbons (oil-based liquids) whilst
repelling water. Like Absorbent GP, it is also
manufactured from reclaimed cellulose, however
the product is coated with a patented polymer to
give it its hydrophobic
( Water Repelling) characteristics. Absorbent W
is ideal for cleaning up spills on water and oil
sheen removal .Absorbent W is available as
particulate, pads, socks, rolls, pillows and booms.




                         ITEM #               DESCRIPTION                 UNIT          ABSORPTION (litres)   TYPE
Particulate              50001           50 litre                       Bag                       22.7         
                         50002           10 litre                       Bale/5                    22.7         
Pads                     54602           40 x 50 cm                     Bale/100                   190         
Pillows                  52011           20 x 45 cm (Fabric)            Box/20                      61         
                         52012           45 x 45 cm (Fabric)            Box/10                      61         
                         52022           45 x 45 cm (Mesh)              Box/8                       61         
                         52023           45 x 80 cm (Mesh)              Box/4                       61         
Rolls                    56632           50 cm x 50 m                   Roll                       209         
                         56634           1 m x 50 m                     Roll                       418         
Socks                    53001           10 cm x 3 m (Fabric)           Box/5                       80         
                         53002           10 cm x 1.2 m (Fabric)         Box/10                      64         
                         53021           10 cm x 3 m (Mesh)             Box/5                       80         
Booms                    51024           20 cm x 3 m (Mesh)             Each                        62         
                         51021           10 cm x 3 m (Mesh)             Bale/4                      71         
   General Purpose             Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Sorbents
               TM
Sphag Sorb
Sphag Sorb is an all organic, oil only absorbent,
manufactured from high quality Sphagnum Peat Moss.
The manufacturing process produces a product which
becomes both oleophilic (hydrocarbon attracting) and
hydrophobic (water-repelling). Sphag Sorb absorbs
hydrocarbons quickly on contact by virtue of its wicking
action, and encapsulates oil on contact. This makes
Sphag Sorb ideal for hydrocarbon clean up, both on open
water as well as land applications.




                           ITEM #                  DESCRIPTION                    UNIT             ABSORPTION      TYPE
                                                                                                     (litres)
Particulate                 SS-1                      31 Litre Bag                  Bag                   50        
   General Purpose                   Oil Only (will not absorb water)      Universal (hazardous chemicals)




                      TM
ChemOil-Away
ChemOil Away is a proprietary blended compound of
earthen materials that absorbs and encapsulates a spill
minimising secondary leaching problems. ChemOil-Away
is effective on virtually all spills including oils, lubricants,
fuels, emulsions, body fluids, coatings, coolants, solvents,
sludges, organic fluids and hazardous chemicals (except
hydrofluoric acid).




                             ITEM #                 DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Particulate                   43001          18.2 kg                            Bag                     13          
                              43002          4.5 kg                           Bucket                     3          
   General Purpose                   Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                               Bio Smart Absorbents

                                        ABSORBENT 15

                                        Bio-Smart Absorbent 15 is manufactured from recycled materials that would
                                        otherwise be thrown away as waste.

                                    These organic fibrous materials are blended and processed to produce a range of
                                    absorbents that quickly absorb a wide variety of liquids including petroleum, oils,
                                    fuels, solvents, cooking oils, sewage, protein fluids and other messy liquids that could
pollute or contaminate the work area and the environment.

Because of its strong ‘wicking effect’ Absorbent 15 is able to rapidly encapsulated liquids so that they cannot leach back
into the environment. Absorbent 15 has been tested for and passes stringent international liquid release standards. In
many areas, Bio-Smart Absorbent 15 can be disposed of to landfill, however this is subject to local regulations.

All Bio-Smart absorbents contain a selection of safe and highly effective microbes that will ‘eat and digest’ oils and many
types of hydrocarbons. When the resultant oil / absorbent mix are placed in landfill it is rapidly composted.
Alternately the waste mix can be incinerated yielding less than 4% ash.

Bio-Smart absorbents are the natural way to convert potentially harmful liquid pollutants into harmless compost and beneficial
‗earthy‘ products.

     ITEM #                  DESCRIPTION                      WEIGHT (kg)

     AB/15            Absorbent15 Floorsweep                       10kg



                                        ABSORBENT ROAD GRIP

                                        Bio-Smart Absorbent Road Grip is manufactured from a special selection of
                                        Australian grown organic cellulose products. These naturally occurring fibrous
                                        materials are blended with a mineral to produce a highly effective absorbent that acts
                                        quickly to remove a wide variety of liquids including petroleum, oils, fuels, solvents,
                                        cooking oils, paint, sewage, protein fluids and other messy liquids that could pollute or
                                        contaminate the work area, roadways and the environment.

Not only does Road Grip leave paved surfaces ‘dry’ the mineral additive significantly reduces slippage improving safety
for both humans and machines alike. Road Grip passes the Australian standards required for slip testing for both
concrete and bitumen surfaces (Test results are available upon request).

Because of its strong ‘wicking effect’ Road Grip able to rapidly encapsulated liquids making it far superior to ‘kitty litter’
products. The mineral base leaves the surface gritty making this product far superior to standard cellulose products. The
end result is an Absorbent that has truly unique characteristics.

Bio-Smart Road Grip has also been designed so that it can readily be collected using commercially available street
sweepers. This means that spills on busy roads can be cleaned up rapidly to allow the fastest return to normal traffic flow.
It also means that worker safety can be protected as hand collection using brooms and shovels becomes a thing of the
past.

All Bio-Smart absorbents contain a selection of safe and highly effective microbes that will ‗eat and digest‘ oils and many types of
hydrocarbons. Whilst this product can be disposed of to landfill safely, its disposal, once used, may be subject to any local regulations
that pertain to the contaminant contained in the resultant waste

     ITEM #                  DESCRIPTION                      WEIGHT (kg)

     AB/RG               Bio Smart Road Grip                       10kg




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                             Bio Smart Absorbents
                                      ABSORBENT 30

                                      Absorbent 30 is made from a relatively heavy, fibrous material and is designed to
                                      encapsulate and recover spills that may occur in outdoor areas. Being heavier,
                                      Absorbent 30 is less effected by wind and so will not blow around in windy areas as
                                      do many light weight powdery absorbents.

                                    The natural fibres in Absorbent 30 provide a very a effective outdoor absorbent that
                                    absorbs a wide variety of liquids including petroleum, hydraulic fluids, coolants, oils,
                                    fuels, solvents, cooking oils and sewage. Because of the strong ‘wicking effect’ of the
fibres in Absorbent 30, hydrocarbons and other fluids sorbed by the product are encapsulated so they cannot readily
leach back out and into the environment. By solidifying a liquid in this manner it is much easier to control and recover.
Once absorbed, hydrocarbons are far less likely to form gasses and therefore the likelihood of an explosive event is
reduced.

Absorbent 30 is also resistant to thermal attack and therefore will not burn readily. In fact in many instances whilst the
product may have been used to absorb hydrocarbons such as diesel it is still very difficult to ignite and will tend smoulder
at most. Regardless, normal Worksafe practices in relation to the correct handling of flammable liquids must be followed.

Absorbent 30 contains an array of safe, highly effective microbes that will ‘eat and digest’ many types of oil and
hydrocarbons. The resultant by-product is converted to compost. Because Absorbent 30 is highly bioactive it is the
product of choice for hydrocarbon spills that occur on non-paved surfaces (dirt and in the field), that may be difficult to fully
recover.

This product is commonly used by companies whose primary need is for a for spill clean-up product after vehicle
breakdowns that occur during field operations. Other users include armed services for field operations, tow truck
operators, hydraulic repairers, fuel tanker operators and bulk fuel carriers such as the rail. Electricity generators find
Absorbent 30 useful for the recovery of transformer oils.


Whilst these products can be disposed of to landfill safely it’s disposal, once used, may be
subject to any local regulations that pertain to the contaminant contained in the resultant
waste.


    ITEM #                 DESCRIPTION                    WEIGHT (kg)

     AB/30           Absorbent30 Floorsweep                   10kg




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Spill Kits



           General Purpose Spill Kits




      Compact Kit (Item # 35012)
      Contains up to 25 litres
         1   x   Spill Dri Particulate (6L)
         1   x   Absorbent GP Fabric Pillow (20 x 45 cm)
         1   x   Absorbent GP Fabric Sock (75mm x 1.2 m)
         5   x   Absorbent GP Pads (40 x 50 cm)
         1   x   Instructions for Use
         2   x   Disposal Bags




      Vehicle Kit (Item # 35001)
      Contains up to 40 litres (includes bag with shoulder
     strap)
         3   x   Absorbent GP Particulate (10 litre)
         2   x   Absorbent GP Fabric Pillow (45 x 45 cm)
         2   x   Absorbent GP Fabric Sock (7.5 cm x 1.2 m)
         1   x   Instructions for Use
         2   x   Disposal Bags




     Portable Case Kit (Item # 35002)
     Contains up to 35 litres (Castor wheels for portability)
       2   x   Absorbent GP Particulate (10 litre)
       2   x   Absorbent GP Fabric Pillow (20 x 45 cm)
       2   x   Absorbent GP Fabric Sock (7.5 cm x 1.2m)
       1   x   Instructions for Use
       2   x   Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Spill Kits


     Utility Box Kit (Item # 35007)
     Contains up to 85 litres
       7   x   Absorbent GP Particulate (10 litre)
       2   x   Absorbent GP Pillows (45 x 45 cm)
       2   x   Absorbent GP Sock (7.5 cm x 2.5 m)
       5   x   Absorbent GP Pads (40 x 50 cm)
       1   x   Deck Scrub
       1   x   Hand Shovel
       2   x   Safety Goggles
       2   x   Dust Mask
       2   x   Coveralls XL
       1   x   Instructions for Use
       2   x   Disposal Bags




      Small Mobile Kit (Item # 35006)
      Contains up to 80 litres
        4 x Absorbent GP Particulate (10 litre)
        2x Absorbent GP Pillows (20 x 45 cm)
        1 x Absorbent GP Sock (7.5 cm x 1.2 m)
        1 x Absorbent GP Sock (7.5 cm x 2.5 m)
        5 x Absorbent GP Pads (40 x 50 cm)
        1 x Safety Goggles
        1 x Dust Mask
        1 x Coveralls XL
        1 x PVC Gloves
        1 x Instructions for Use
        2 x Disposal Bags




      Large Mobile Kit (Item # 35005)
      Contains up to 150 litres
        3 x Spill Sorb (28 Litre)
        2 x Absorbent GP Pillows (45 x 45 cm)
        2 x Absorbent GP Sock (7.5 cm x 1.2 m)
        2 x Absorbent GP Sock (7.5 cm x 2.5 m)
       10 x Absorbent GP Pads (40 x 50 cm)
        1 x Safety Goggles
        1 x Dust Mask
        1 x Coveralls XL
        1 x PVC Gloves
        1 x Instructions for Use
        1 x Deck Scrub Broom
        1 x Anti Spark Shovel
        5 x Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Spill Kits



Oil Only Spill Kits




    Compact Kit (Item # 55012)
    Absorbs up to 25 litres
      1    x   Absorbent W Particulate (10L)
      1    x   Absorbent W Pillow (20 x 45 cm)
      1    x   Absorbent W Sock (10 cm x 1.2 m)
      5    x   Absorbent W Pads (40 x 50 cm)
      1    x   Instructions for Use
      2    x   Disposal Bags




    Vehicle Kit (Item # 55001)
    Absorbs up to 40 litres (includes bag with shoulder strap
      2x Absorbent W Sock (10cm x 1.2 m)
      2 x Absorbent W Pillow (20 x 45 cm)
      3 x Absorbent W Particulate (10 litre)
      1 x Instructions for Use
      2 x Disposal Bags




       Portable Case Kit (Item # 55002)
       Absorbs up to 35 litres
       2   x   Absorbent W Particulate (10 litre)
       2   x   Absorbent W Pillow (20 x 45 cm)
       2   x   Absorbent W Sock (10 cm x 1.2m)
       1   x   Instructions for Use
       2   x   Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Organic Spill Kits
     Utility Box Kit (Item # 55007)
     Absorbs up to 85 litres
        5 x Absorbent W Particulate (10 litre)
        2 x Absorbent W Mesh Pillows (20 x 45 cm)
        2 x Absorbent W Mesh Booms (10 cm x 3 m)
        5 x Absorbent W Pads (40 x 50 cm)
        1 x Deck Scrub
        1 x Hand Shovel
        1x Safety Goggles
        1 x Dust Mask
        1 x Coveralls XL
        1 x Instructions for Use
        1 x PVC Gloves
        2 x Disposal Bags




     Small Mobile Kit (Item # 55006)
     Contains up to 80 litres
        4   x   Absorbent W Particulate (10 litre)
        2   x   Absorbent W Pillows (20 x 45 cm)
        1   x   Absorbent W Sock (10 cm x 3 m)
        1   x   Absorbent W Sock (10 cm x 1.2 m)
        5   x   Absorbent W Pads (40 x 50 cm)
        1   x   Safety Goggles
        1   x   Dust Mask
        1   x   Coveralls XL
        1   x   PVC Gloves
        1   x   Instructions for Use
        2   x   Disposal Bags




   Large Mobile Kit (Item # 55005)
   Absorbs up to 150 litres
     2 x Absorbent W Particulate (50 litre)
     2 x Absorbent W Sock (10 cmx 3 m)
     2 x Absorbent W Pillows (45 x 45 cm)
     2 x Absorbent W Sock (10 cm x 1.2 m)
     10 x Absorbent GP Pads (40 x 50 cm)
     1 x Safety Goggles
     1 x Dust Mask
     1 x Coveralls XL
     1x PVC Gloves
     1 x Instructions for Use
     1 x Deck Scrub Broom
     1 x Anti spark shovel
     5 x Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents

                      TM
Oil Blotter (A610)
A610 is a granulated polymer that solidifies petroleum-
based liquids into large bonded pieces providing waste
minimisation. A610 does not bond to or absorb water and
therefore works well on hydrocarbon-based spills such as
oils, fuels, solvents and oil-based paints on both land and
water. A610 bonds with little increase in volume
ensuring minimal waste for disposal. The desired degree
of solidification and the viscosity of the liquid being
bonded determines the amount of product required. Five
hundred grams of A610 will bond 7.5 kg of liquid. A610
is certified as incinerable to less than 0.02% ash




        ITEM #             ITEM #                DESCRIPTION                   UNIT              ABSORPTION     TYPE
                                                                                                  (kg/liquid)
Granules                    44001           A610 300 gm                    Shaker                       4.5      
                            44002           A610 1 kg                      Bucket                       15       
                            44003           A610 6 kg                      Bucket                       90       
                            44004           A610 18 kg                     Drum                         270      
   General Purpose                Oil Only (will not absorb water)      Universal (hazardous chemicals)




            TM
MRO Plus Sorbents
MRO PlusTM is a general purpose or universal sorbent,
highly effective for clean-up and removal of most oil and
water based liquids. MRO Plus is manufactured from a
high strength, grey dimpled material which combines
thickness, durability, high absorbency and low linting.
Perforations permit the use of precisely the right amount
and the products dark dirt-masking colour enables longer
use before disposal. Incineration residue is less than 0.2
% ash by weight.
The MRO Plus is manufactured by ultrasonically bonding
2 thin sheets on top and below of a thicker sheet – thus
giving it a triple layer effect. The outer two layers are for
protecting the sorbent and minimising the lint where as
the ―inner‖ thicker sheet provides the absorption.



                           ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Pads                  MRO100               41 x 51 cm                      Bale/100                  190         
Rolls                 MRO15-DP             38 cm x 30.5 m                  Roll                       94         
                      MRO30                76 cm x 30.5 m                  Roll                      189         
   General Purpose                Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents
                      TM
Universal Plus Sorbent
Universal PlusTM is a specially developed chemical
sorbent with properties that make it ideal for clean-up of
hazardous or aggressive chemicals. A surfactant-treated
polypropylene, Universal Plus absorbs up to 16 times its
weight in chemicals, water or oil. Versatile and cost
effective, Universal Plus can be used on a range of
chemicals including hydrofluoric acid. Its fast wicking
action minimises the problems of hazmat spills.
Universal Plus is chemically inert, so it will not react with
aggressive fluids.




                           ITEM #              DESCRIPTION                UNIT          ABSORPTION (litres)       TYPE
Pads                       UN1113        28 x 33 cm                      Bale/50                    79              
                           UN1719        41 x 51 cm                      Box/100                    91              
   General Purpose              Oil Only (will not absorb water)      Universal (hazardous chemicals)




UXTTM Universal “Xtra Tough” Sorbent
UXT is a high performance, all purpose product, outstanding in its ability to handle hazardous materials in
maintenance, repair and operational environments. UXT is oleophilic (hydrocarbon Attracting ) and hydrophilic (
water absorbing ), making it highly effective against oil, acids, solvents, bases, chemicals, coolants and antifreeze.
Perforation ensures that you use only the amount needed for the job.




                           ITEM #              DESCRIPTION                UNIT          ABSORPTION (litres)       TYPE
Roll                       UXT505        13 cm x 30 .5 m                 Roll                       57              
   General Purpose              Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents
             TM
Battlemat
BattlematTM is unique in the sorbent market and is
available in both general purpose / universal and oil only.
Battlemat is perfect as walk-on mats or as single use,
clean-up sorbents in manufacturing plants and similar
environments. The durable, abrasion-resistant upper layer
draws liquid into the centre of the product whilst the more
impervious lower layer prevents liquids from seeping
through to the floor, thus making Battlemat the floor mat
of choice wherever there is overspray or heavy traffic.
The camouflage pattern also masks drips and spills
thereby ensuring longevity. An extremely cost-effective
product that incinerates to 0.02% ash.




                        ITEM #               DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Rolls                 BM15              38 cm x 46 m                   Bale                      106         
                      BM30X             76 cm x 46 m                   Bale                      216         
                      OBM30X            76 cm x 46 m                   Bale                      216         
   General Purpose            Oil Only (will not absorb water)      Universal (hazardous chemicals)




                                   TM
Sorbent Industrial Rugs (SIR )
Made of durable, needle punched, polypropylene fibres,
the SIR absorbs 10-12 times its weight in oil, water or
chemicals. For high traffic areas and workstations -
prevents slippery areas and eliminates unsightly tracking
between plant and office. Can stand up to the most
aggressive chemicals.




                        ITEM #               DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Rolls                 SIR36             92 cm x 91.5 m                 Bale                      106         
                      SIR72             183 cm x 45.7 m                Bale                      106         
   General Purpose            Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents
                                TM
Barrier Spill Matting (BSM )
Made of needle punched, polypropylene fibres, BSM is
designed with a unique three-ply construction that
prevents fluids from penetrating to the floor and provides
the best non-slip surface available. BSM absorbs oil,
water and chemicals. As further assurance of worker
safety, the BSM also resists curling and buckling.




                        ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Rolls                 BSM150           92 cm x 45.7 m                    Bale                     142         
   General Purpose             Oil Only (will not absorb water)      Universal (hazardous chemicals)




    TM
ENV Oil Sorbents
ENVTM Oil Sorbents are a relatively new product and represent the most economical of the polypropylene sorbents
available. ENV oil sorbents are packed in distinctive green bags, and are an obvious choice when cost is the
overwhelming factor governing selection. ENV sorbents are ideal for environmental applications such as spill clean-up


                                Oil Only (will not absorb water)      Universal (hazardous chemicals)




   General Purpose             Oil Only (will not absorb water)      Universal (hazardous chemicals)


                        ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Pads                   ENV100           41 x 51 cm                      Bale/100                  125         
                       ENV200           41 x 51 cm                      Bale/200                  140         
Rolls                  ENV810           20CM x 3M                        Bale/4                   267         




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents
    TM
SPC Oil Sorbents
SPCTM Oil Sorbents are convenient, lightweight, cost-effective and are capable of absorbing up to 25 times their own
weight in fuels and oils. Additionally, they are equally effective in soaking up petroleum based solvents and paints,
vegetable oils and other non-water soluble chemicals. SPC Oil sorbents will not absorb water, will float, and are
wringable and dustless, unaffected by normal temperature, flame resistant and impervious to both rot and mildew. SPC
is the next grade up in quality from the ENV range. SPC is manufactured using the same technology as ENV, however
the sorbents are ultrasonically bonded to improve strength and reduce lint. This style of pad is common to a number of
manufacturers, however SPC has the added advantage of being perforated which means that you only use as much of the
pad or roll as you need.




                       ITEM #               DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Pads                   SPC100         41 x 51 cm                      Bale/100                  136          
                       SPC200         41 x 51 cm                      Bale/200                  140          
Booms                  SPC820         20 cm x 6 m                     Bale/2                    267          
                       SPC810         20 cm x 3 m                     Bale/4                    267          
                       SPC510         13 cm x 3 m                     Bale/4                    121          
Rolls                  SPC150         96 cm x 44 m                    Bale/1                    273          
                       SPC152         48 cm x 44 m                    Bale/2                    273          
   General Purpose           Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents
         TM
Oil Plus
Oil PlusTM is highly effective in absorbing oil and petroleum products. Oil Plus is constructed from a heavyweight,
dimpled material notable for its low linting, thickness and strength. Oil Plus will not pick up water. Suitable for
industrial and environmental applications, Oil Plus is perforated which means that you only use as much of the pads or
rolls as you need. Easily disposed of, Oil Plus is incinerable and leaves less than 0.02% ash. Oil Plus is regarded as one
of the best oil only sorbents available on the market.



                        ITEM #                DESCRIPTION                UNIT          ABSORPTION (litres)      TYPE
Pads                    OP100           41 x 51 cm                      Bale/100                  114             
Rolls                  OP15-DP          38 cm x 46 m                    Bale/1                     95             
                         OP30           76 cm x 46 m                    Bale/1                    190             
   General Purpose             Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents



Pillows
Absorbent pillows are excellent for absorbing spills and
leaking fluids in restricted circumstances and under
persistent drip sources. Choices include: Allwik for
absorption of oil, water and chemicals; Oil Only for use in
waste troughs, coolant tanks, fluid reservoirs and sump
wells; and Hazwik, intended for use with hazardous
materials.




                               ITEM #             DESCRIPTION                    UNIT            ABSORPTION         TYPE
                                                                                                   (litres)
 Allwik                     AW1818                46 x 46 cm                  Box/16                   79            
                            AW99                  23 x 23 cm                  Box/32                   106           
 Oil Only                   OIL1818               46 x 46 cm                  Box/16                   79            
                            OIL99                 23 x 23 cm                  Box/32                   106           
 Hazwik                     HAZ1818               46 x 46 cm                  Box/16                   79            
                            HAZ99                 23 x 23 cm                  Box/32                   106           
   General Purpose       Oil Only (will not absorb water)        Universal (hazardous chemicals)




Drum Top Covers
Drum top covers are pre-cut to fit 205 litre drums
with one or two bung holes. They prevent pump
drips from reaching the floor, and keep drum tops
and drum storage areas clean. Available in Allwik
for oil, water, and chemicals and Oil Only for oil and
petroleum based liquids.




                        ITEM #                 DESCRIPTION                      UNIT          ABSORPTION (litres)     TYPE
 Allwik                 DTA25            56 cm dia.                             Box/25                   34              
 Oil Only               DTO25            56 cm dia.                             Box/25                   34              
   General Purpose             Oil Only (will not absorb water)             Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents

Socks

PPI Services offers a wide array of polypropylene socks which can be used to mould around corners and
conform to uneven surfaces to prevent and soak up spills and drips. These products are available in a variety
of types and sizes. Socks are an everyday working tool for major industries, including chemical plants, heavy
and light manufacturing, transportation, printing, and public utilities. Choices include: Allwik which is an all-
purpose maintenance sock with moderate chemical resistance that makes it suitable for most industrial
applications; Oil Only that will not absorb water or water-based solutions; and Hazwik for use with aggressive
fluids. All socks are wringable, incinerable and disposable to landfill depending upon their application.

                       ITEM #              DESCRIPTION                UNIT          ABSORPTION (litres)   TYPE
Allwik                 AW412        7.6 cm x 1.22 m                  Box/12                    45          
                       AW806        7.6 cm x 2.44 m                   Box/6                    45          
                       AW124        7.6 cm x 3.66 m                   Box/4                    45          
Oil Only              OIL412        7.6 cm x 1.22 m                  Box/12                    45          
                      OIL806        7.6 cm x 2.44 m                   Box/6                    45          
                      OIL124        7.6 cm x 3.66 m                   Box/4                    45          
Hazwik                HAZ412        7.6 cm x 1.22 m                  Box/12                    45          
                      HAZ124        7.6 cm x 3.66 m                   Box/4                    45          
   General Purpose          Oil Only (will not absorb water)      Universal (hazardous chemicals)




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Sorbents



Railway Track Matting

    Used to absorb oil, fuels and other hydrocarbon
    based fluids from trains in railway yards,
    maintenance centres whilst repelling water.

    Heavy duty poly backing prevents leakage

    Suitable for a wide range of indoor and outdoor
    applications.




                             ITEM #                          DESCRIPTION                 UNIT       ABSORPTION   TYPE
                                                                                                      (litres)
 Track Matting          CE-8330                    1.45m x 50 m                          1/Bag           300      
                        CE-8331                    45cm x 50m                            2/Bag           200      
                        CL-8330                    1.45m x 50m No Backing                1/Bag           300      
   General Purpose            Oil Only (will not absorb water)      Universal (hazardous chemicals)




TENCATE ROLLS & PADS

                                                                                                    ABSORPTION
                             ITEM#                          DESCRIPTION                  UNIT                    TYPE
                                                                                                      (LITRES)
       Rolls

      Oil Only             MB 200 PF                200gsm White 96cm x 50m              1/roll          280      
General Purpose           MB 200 HPF               200gsm Yellow 96cm x 50m              1/roll          280      
General Purpose           MB 400 HPF               400gsm Yellow 96cm x 50m              1/roll          300      


                                                                                                    ABSORPTION
                            ITEM#                          DESCRIPTION                  UNIT                     TYPE
                                                                                                      (LITRES)
       Pads

     Oil Only              MB 200                200gsm White 43cm x48cm             Bale/200            140      
     Oil Only              MB 400                400gsm White 43cm x48cm             Bale/100            130      
General Purpose          MB 200 HYP              200gsm Yellow43cm x48cm             Bale/200            140      
                         MB 400 HYP              400gsm Yellow 43cm x48cm            Bale/100            130      




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Spill Kits

                               General Purpose Spill Kits


   Economy SpillPak (Item # SKA-40)                 Vehicle SpillPak (Item # SKA-60)
   Contains up to 30 litres                         Contains up to 60 litres
     3 x Allwik Socks (76cm x 1.22m)                  1 x Allwik Sock (76cm x 3.66m)
     15 x MRO Plus Sorbent Pad                        4 x Allwik Pillows (46 cm x 46 cm)
     1 x PVC Gloves                                   15 x MRO Plus Sorbent Pad
     1 x Safety Goggles                               1 x PVC Gloves
     1 x Instructions for Use                         1 x Safety Goggles
     1 x Disposal Bags                                1 x Instructions for Use
                                                      1 x Disposal Bags




Small Mobile SpillPak (Item # SKA-120)               Large Mobile SpillPak (Item # SKA-240)
Contains up to 100 litres                            Contains up to 250 litres
  6 x Allwik Socks (76cm x 1.2m)                       6 x Allwik Sock (76cm x 3.66m)
  6 x Allwik Pillows (46 cm x 46 cm)                   8 x Allwik Pillows (46 cm x 46 cm)
  25 x MRO Plus Sorbent Pad                            100 x MRO Plus Sorbent Pad
  1 x Coveralls                                        2 x Coveralls
  1 x Safety Goggles                                   2 x Safety Goggles
  1 x PVC Gloves                                       2 x PVC Gloves
  1 x Instructions for Use                             1 x Instructions for Use
  3 x Disposal Bags                                    6 x Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Spill Kits

                                      Oil Only Spill Kits

 Economy SpillPak (Item # SKO-40)                   Vehicle SpillPak (Item # SKO-60)
 Contains up to 30 litres                           Contains up to 60 litres
 3 x Oilwik Sock (76cm x 1.22m)                     1 x Slikwik Sock (76cm x 3.66m)
 15 x Standard Oil Sorbent Pad                      4 x Slikwik Pillows (46 cm x 46 cm)
 1 x PVC Gloves                                     15 x Standard Oil Sorbent Pad
 1 x Safety Goggles                                 1 x PVC Gloves
 1 x Instructions for Use                           1 x Safety Goggles
 1 x Disposal Bags                                  1 x Instructions for Use
                                                    1 x Disposal Bags




Small Mobile SpillPak (Item # SKO-120)             Large Mobile SpillPak (Item # SKO-240)
Contains up to 100 litres                          Contains up to 250 litres
6x Slikwik Sock (76cm x 1.2m)                      6x Slikwik Sock (76cm x 3.66m)
6 x Slikwik Pillows (46 cm x 46 cm)                8 x Slikwik Pillows (46 cm x 46 cm)
25 x Standard Oil Sorbent Pad                      100 x Standard Oil Sorbent Pad
1 x Coveralls                                      2 x Coveralls
1 x Safety Goggles                                 2 x Safety Goggles
1 x PVC Gloves                                     2 x PVC Gloves
1 x Instructions for Use                           1 x Instructions for Use
3 x Disposal Bags                                  6 x Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Synthetic Spill Kits
                                     Hazardous Spill Kits

  Economy SpillPak (Item # SKH-40)               Vehicle SpillPak (Item # SKH-60)
                                                 Contains up to 60 litres
  Contains up to 30 litres
                                                 1 x Hazwik Sock (76cm x 3.66m)
  3 x Hazwik Socks (76cm x 1.22m)
                                                 4 x Hazwik Pillows (46 cm x 46 cm)
  15 x Universal Pads
                                                 15 x Universal Pads
  1 x PVC Gloves
                                                 1 x PVC Gloves
  1 x Safety Goggles
                                                 1 x Safety Goggles
  1 x Instructions for Use
                                                 1 x Instructions for Use
  1 x Disposal Bags
                                                 1 x Disposal Bags




Small Mobile SpillPak (Item # SKH-120)         Large Mobile SpillPak (Item # SKH-240)
Contains up to 100 litres                      Contains up to 250 litres
6x Hazwik Sock (76cm x 1.2m)                   6x Hazwik Sock (76cm x 3.66m)
6 x Hazwik Pillows (46 cm x 46 cm)             8 x Slikwik Pillows (46 cm x 46 cm)
25 x Universal Pads                            100 x Standard Oil Sorbent Pad
1 x Coveralls                                  2 x Coveralls
1 x Safety Goggles                             2 x Safety Goggles
1 x PVC Gloves                                 2 x PVC Gloves
1 x Instructions for Use                       1 x Instructions for Use
3 x Disposal Bags                              6 x Disposal Bags




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Spill Trailers & Containerised Spill Response
Spill Trailers
PPI Services are able to design custom built spill towable trailers and containers using either organic or synthetic
sorbents. PPI Services staff will liaise with you directly to ascertain which configuration of sorbents best suits your
needs. A typical trailer may include various combinations of:

    Particulate                                                      Brooms
    Booms                                                            D-Grip Shovels (Anti-Static)
    Pads                                                             Hand Shovels (Anti-Static
    Pillows                                                          Witches Hats
    Poly Overpack (Waste Disposal)                                   Rakes
    Hazard Marking Tape                                              Star Pickets

If you intend using your spill trailer predominantly on unsealed roads such as around mine sites or alike we can ensure
that the trailer is built to last. Modifications may include:

         Increase the size of the drawbar;
         45 mm axle with slimline bearings vs. the standard 40 mm axle with Holden trailer bearings;
         Australian made slipper springs vs. imported springs; and
         8 ply tyres vs. normal car tyres.




Containerised Packages
PPI SERVICES has the ability for 10, 20 & 40 ft
containerised packages to be manufactured. They
can be tailored to accommodate individual needs,
whether the requirement is for equipment suited for
offshore operation, within a port or harbour, for
beach response or use in river and creek systems.
Possible contents could include a range of different
equipment including sorbents, containment booms,
skimmers, a vacuum unit, portable bunding, tools,
personal safety equipment and temporary storage
equipment.




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Spill Kit Accessories



Drain Protector
The Stingray Drain Protector is the obvious choice when          Easily deployed and removed;
you need to provide effective and immediate stormwater           Ideal for both indoor and outdoor applications;
protection. The Stingray is designed to seal stormwater          Inert to water, petroleum based products and most
drains, grates and manholes following a spill.                   caustics;
Manufactured from high quality polyurethane elastomers,          Reusable, simply clean with soap and water;
the Stingray moulds to the ground‘s surface contours             Hard wearing and abrasion resistant. Will not be
preventing leakage into the stormwater system.                   adversely affected by pedestrian or vehicle traffic;
                                                                 Available in a range of sizes; and
                                                                 Easily stored either rolled up or laid flat.




 ITEM #             DESCRIPTION                UNIT
  42007       45 x 45 x 1.8 cm                 1 Unit

  42008       60 x 60 x 1.8 cm                 1 Unit

  42009       90 x 90 x 1.8 cm                 1 Unit

  42010       120x 120 x 1.8 cm                1 Unit

  41089       Carry Bag 45-60 cm                Bag

  41090       Carry Bag 90 cm                   Bag

  41091       Carry Bag 120cm                   Bag




Gapseal
Gapseal is great for quick and safe temporary plugging of leaks and spills from drums, storage containers and pipes,
etc. Simply take a handful of Gapseal, form a ball with gloved hands and apply the product to the leaking area.
Gapseal is for use with all types of hydrocarbons.




 ITEM #            DESCRIPTION                 UNIT
  41005       Hydrocarbon Premix              0.25 kg

  41006       Hydrocarbon Premix              0.50 kg
  41007       Hydrocarbon Premix                1kg
  41008       Hydrocarbon Premix                2kg




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Spill Kit Accessories


Portable Containment Bunds
Portable Bunding is great for any Spill Kit or Spill Response Vehicle. The unique design allows the Portable Bund to
fold up and be carried to a spill. Snap-up support strips create a sturdy sidewall when it is open, and allows for easy
accessibility. Manufactured from XR-5(Composite fabric of woven polyester molecularly coated to resist UV and Uric
acid), the portable containment bund offers excellent chemical resistance to the widest range of chemicals, acids and
fuels. Portable Bunds are available in a range of sizes and can be built to specification, if required.




      ITEM #                 DESCRIPTION                WEIGHT (kg)            CAPACITY               PACKED
                                                                                (litres)            DIMENSIONS
      77001           L1.2 x W1.8 x H0.3 m                    6                   648             0.6 x 0.6 x 0.1 m

      77002           L2.0x W2.0 x H0.3 m                     9                  1,200            0.7 x 0.7 x 0.1 m

      77003           L3.0 x W3.0 x H0.3 m                    16                 2,700              1 x 1 x 0.15 m

      77004           L4.0 x W8.0 x H0.3 m                    46                 9,600            2.1 x 1.1 x 0.2 m

      77005           L4.0 x W12.0 x H0.3 m                   70                 14,400           2.1 x 1.2 x 0.3 m

      77006           L4.0 x W18.0 x H0.3 m                   98                 21,600           2.1 x 1.2 x 0.5 m

      77007           L5 x W15 x H0.3 m                      100                 22,500           2.6 x 1.2 x 0.4 m

      77008           L5 x W20 x H0.3 m                      131                 30,000           2.6 x 1.4 x 0.5 m
Custom Sizes Available. Weights are accurate. Packed dimensions are approximate only.




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
SPILL
CONTROL
CENTRE
                                                            (Part No: SPC-SCCAW)
Reinventing the Wheelie Bin
   Utilising the new Spill Control Centre, this general purpose spill kit is ideal for most
   industrial sites. With the cabinet design it is much easier to access the contents. The absorbents
   included in the kit are suitable for all non aggressive liquids including oils, solvents and glycols.
   The Spill Control Centre brings a new level of professionalism to the workplace.

Features
   Suitable for day-to-day spill control or as an emergency spill kit.
   Allows you to see and access the absorbents you need, not just the ones on top.
   Comes with castors or can be wall mounted.
   Doesn‘t look like a rubbish bin and won‘t become full of garbage.
   Up to 190L Capacity.
   Audit sheet is included to aid with ISO14001




Contents

    Qty            Item                         Description                        Code
    1              Cabinet                      126(L) x 75(H) x 52(W)cm           SPC-SC3000B
    2              Spill Sorb                   28L Bag                            40032
    50             General Purpose Pads         40 x 50cm                          34602
                   General Purpose
    9              Socks                        7.5cm x 1.2m                       33032
    1              Gloves - pair                45cm Gauntlet                      10102
    1              Goggles                      Splash Resistant                   10202
    1              Coveralls                    XL                                 10204
    1              Disposable Respirator        P1                                 10203
    3              Disposal Bags                82L Heavy Duty                     10501a




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
      Spill Control Centre




                 Reinventing the wheelie bin.
The Spill Control Centre
       Suitable for day-to-day spill control or as an emergency spill kit
       Allows you to see and access the absorbents you need , not just the ones on top
       Doesn’t look like a rubbish bin – won’t become full of garbage
       Customisable – create your own layout, single or double storey. It can even be hung
       on a wall.
       Up to 190 litre capacity.
       Single unit size     120cm W x 60cm D x 80cm H
       Double unit size     120cm W x 60cm D x 160cm H

Each unit comes flat packed, and is complete with castors, dowels, instructions and
stickers. It is currently available through PPI Services Pty Ltd.




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                                             Specialty Items
Amalgamation Powder
  Developed to make cleaning mercury spills from
  work surfaces, floor cracks and other hard to reach
  areas safer and easier.
  Converts elemental mercury into an amalgam which
  stops dangerous mercury vapours from being
  emitted.

      Economy SpillPak (Item # NPS-521000)
  Amalgamation Powder 1 kg




Small Mercury SpillPak                                        Large Mercury SpillPak
  Designed to assist only in the clean-up of the mercury        Designed to handle all stages of cleaning up mercury
  spill itself, not to completely clean up the contaminated     spills.
  area.                                                         This kit does not contain any chemicals designed to
  For one time use only.                                        make the mercury less toxic or less dangerous.
                                                                For one time use only.




                                                                 Large Mercury SpillPak (Item # NPS-520250)
  Small Mercury SpilPak (Item # NPS-520260)                      Amalgamation Powder 270 g
 Amalgamation Powder 500 g                                       Indication Powder 250 g
 Chemical Sponge x 2                                             Vapour Supressor / Shaker Bottle x 1
 Jar x 1                                                         Aspirator Bottle x 1
                                                                 Waste Collection Bottle x 1
                                                                 Mixing Tub with Spatula x 1
                                                                 Chemical Sponge x 1
                                                                 Nitrile Gloves x 1
                                                                 Disposal Bag & Twist Tie x 1
                                                                 Wisk on Pan x 1




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Specialty Items


Kolor-Lock® Neutralizers & Solidifiers
   One Step Process
   Provides for rapid containment and isolation of
   acid spills while reducing the hazard
   Neutralizes and solidifies the spill for convenient
   disposal




      Kolor-Lock Neutralizers & Solidifiers (Item # NPS - 442201)           UNIT
“B” 2# Shaker Bottle for acids with a concentration greater than 40%      10 /Case



Vapour Supressor Spill Kit
Designed to handle small scale leaks and spills from
containers, drums, tanks, etc that contain flammable
liquids, pesticides and herbicides.

 Vapour Supressor Spill Kit (Item # NPS - 460088)
Vapour Suppressor Shaker Bottle x 1

Hazmat Pads (30 x 30 cm) x 10

Scoop with Detachable Scraper x 1

Nitrile Gloves x 1 pr

Poly Apron x 1

Splash Goggles x 1

Disposal Bag & Twist Tie x 1



Chemical & Wastewater Kit
   Assists in identifying unknown spills both indoors
   and outdoors
   Strips quickly indicate the possible presence of a
   variety of chemicals in unknown liquids utilizing
   an easy to follow colour classifier chart
   Ideal for personnel who respond to unknown liquid
   spills on a regular basis.




Chemical & Wastewater Kit (Item # NPS - 570001)
Chemical Classifier Strips x 6

Bobbin of Polypropylene Thread x 1

Laminated Chemical Classifier Chart x 1




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Specialty Items


MEDICLEAN Biohazard Solidifier
   Quickly and safely eliminates the biohazard associated
   with bodily fluids.
   Solidifies for convenient disposal.




          ITEM #                               DESCRIPTION                 UNIT
NPS-8680032                     2 lb Shaker Container                     1 /Case

NPS-680011                      5 Oz Shaker Container                    24 /Case




MEDICLEAN Biohazard Solidifier Kit
   Designed in accordance with OSHA standards for protecting
   employees against exposure to blood borne pathogens
   Ideal for work environments where employees may be exposed
   to blood, bodily fluids or other infectious fluids. Solidifies for
   convenient disposal.



  MEDICLEAN Biohazard Solidifer Kit (Item # NPS - 680091)
Quick Carry/Wall Mount Container x 1

MEDICLEAN Biohazard Solidifier x 1

Protective Gloves x 1 pr.

Disposable Gown x 1

Medical Face Shield x 1

Antiseptic Wipes x 2

Scoop with Detachable Scraper x 1

Biohazard Disposal Bag x 1

Blue Surgical Mask x 1




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Handling


Flexible Bunding
Flexi-bund is for use in industrial areas where spills and wash-down liquids are required to be contained within a
specified area. It is an efficient, safe and effective environmental pollution control product suitable for a wide range of
uses. Flexi-Bund is designed to create a 50 mm high barrier across doorways or storage areas where forklifts or trolleys
have to cross continuously. The product is particularly popular in the Automotive Industry.

         Cost-effective                                                 High visibility yellow
         Easily installed                                               Ideal for pollution prevention
         Water proof                                                    Easy to relocate
         Impervious                                                     Install in continuous lengths




        Specifications                       Flexi-Bund                                 Installation Kit
  Item #                                        75057                                       75058
 Description                         42 mm high, 100 mm wide                          Sikaflex Adhesive




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Handling

2, 4, 6 & 8 Drum Workstations
Workstations are designed to prevent incidental spills from reaching the factory floor. One piece construction optimises
space, durability, safety and efficiency. With ample sump capacity in each workstation this secondary containment
product is perfect for a dispensing station or work centre. Each workstation is designed for stand alone use or combines
with other workstations via a link-lock system for a customised work area. Rolled-edge design helps resist cracking and
warpage. An optional ramp combined with the low profile design also means that the Workstations are easy to load.

          Tough polyethylene construction –rust and corrosion resistent
          Low-profile Workstations actually become part of your factory floor, optimising space for increased safety and
          efficiency. Make drum loading a snap;
          Large sump capacity catches incidental spills;
          Multi-purpose Work Ramp hooks onto any Workstation for easy loading; and
          Heavy-duty removable structural foam grates for easy cleaning.




2 Drum Workstation                                                      4 Drum Workstation




6 Drum Workstation                                                      8 Drum Workstation
    SPECIFICATIONS                 2-DRUM)               4-DRUM                 6-DRUM                 8-DRUM
  Item #                            75011                 75010                  75009                  75008
 Dimensions                   135 x72 x 15 cm      133 x 135 x 15 cm      194 x 135 x 15 cm      254 x 135 x 15 cm

 Weight                             18 kg                32.85 kg                47 kg                62.55 kg

 Load Bearing Capacity             1,080 kg              2,700 kg              3,150 kg                 3,600

 Sump Capacity                    83.6 litres          163.4 litres           231.8 litres           292.6 litres




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Handling


Low-Profile In-Line Poly-SpillPalletTM 3000                    Poly-Slim-LineTM 6000

You will be surprised how much new space you will be able      Poly-Slim-Line 6000 offers all of the same advantages
to find around the floor when you start storing drums on our   as our Poly-SpillPallet 6000….and more. This addition
In-Line Poly-Spillpallet 3000. Start storing them in-line      to our pallet family features a 25 cm profile and a UDL
near the wall, between columns and in all those spaces you     load bearing capacity of 2,700 kg.
thought were unusable – until now. Its just another
innovative way to help you manage the hazardous materials.




             SPECIFICATIONS                        IN-LINE POLY-                    POLY-SLIM-LINETM 6000
                                                SPILLPALLETTM 3000
    Item #                                              75018                                75014

    Dimensions                                    249 x 64 x 30 cm                     137 x 137 x 30 cm

    Weight                                               36 kg                                41 kg

    Load Bearing Capacity                              1,350 kg                             2,700 kg

    Sump Capacity                                    250.8 litres                          250.8 litres




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Handling

The New Range of SPC Spill Pallets
Spill Pallets provide a safe and convenient method of handling 205L drums as well as other storage
containers. The spill pallets capture spilt liquids before they can contaminate work floors or the
environment. This saves on clean up costs as well providing a method to reclaim the lost liquids. The
SPC range of spill pallets are also strong enough that they can be moved fully laden with drums.


Features
The pallets are injection moulded rather
than rotationally moulded; this ensures a
consistent wall thickness with increased
strength and rigidity.
Both the 4 and 2 drum spill pallets are the
same height – allowing multiple
configurations
Grates are interchangeable between the 4
and 2 drum.
EPA Compliant.
Ramp is suitable for both sizes.
Both the 2 and 4 drum units are nest-able.
The lip and grate are the same height,
allowing drums to be easily moved from
one pallet to another.
Locating pins ensure the sides won‘t buckle.




  Item             Description            Capacity   Load Capacity    Dimensions             Weight
  SPC-SCODP4       4 Drum Spill Pallet    488L       2000kg           132 x 132 x 43cm       40kg
  SPC-SCODP2       2 Drum Spill Pallet    260L       1000kg           132 x 66 x 43cm        21kg
  SPC-SCOPR        Ramp                              295kg            165 x 76 x 55cm
  SPC-SCODK        Sump Connector Kit     N/A        N/A              N/A                    N/A




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Handling

IBC2000i
INTERMEDIATE BULK CONTAINMENT MADE EASY

ENPAC Corporation’s new integrated IBC2000i gives intermediate bulk container users more versatile spill
containment. It fits more than 99% of all IBC dispensing units and features a large sump capacity of 385
gallons/1457 57 litres, exceeding EPA40 CFR264. 175 regulations. The unit also comes with an integrated 5
gallon pale holder for quick and easy dispensing.

The IBC2000i is the only one piece, lightweight, 100% polyethylene IBC spill containment unit that is
forkliftable and nestable for convenient shipment and storage, and reduces shipping cost. The polyethylene
construction will not rust or corrode or have adverse reactions with chemicals. An optional drain is available


The IBC2000i has a foot-           Grates on the centre pedestal offer skid     Features a large sump 385
gallons. Print of 56-3/4”L x 56” W         resistance and facilitate loading       exceeding EPA40 CFR264.
175




             Forklift Channels
                                  The unit’s 8000lb load capacity
                                 allows two Nestable IBCs to be stacked
                                 on top of the sump                            Integrated Pale holder
                                                                                  For quick
                                                                                  And easy
                                                                                  Dispensing
                       Specifications
                            IBC2000i
Product No              5469-YE, 5469-YE-D w /drain
                        72” L x 80” W x 29” H
Exterior Dimensions
                        182.88cm x 203.20cm x 73.66cm
                        55” L x 55.5” W x 29” H
Pedestal dimensions
                        139.7cm x 140.97cm x 73,66cm
Weight                  308lbs / 678kg
Sump                    385 gal. / 1457.45 litres
ax. Load Rating         8000lbs. UDL
Regulations             EPA40 CFR264. 175




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                                            SPILLPAL™
                  THE MOST AFFORDABLE, THE MOST CONVENIENT
                             TEMPORARY STORAGE.

                 The flexible-sidewall Spillpal line is the easiest to use and the
                 most affordable hazardous material storage product on the market
                 today. Spillpal provides incidental spill control during temporary
                 storage of drums, machine parts, tanks and generators and can
                 also be used as a washdown pad or pumping station. An
                 alternative to hard plastic pallets that need to be moved by a
                 forklift and are always in the way, ENPAC‘s Spillpal features 4"
                 foam sidewalls that easily spring back into place after any type of
                 pressure is applied. With eight configurations, Spillpal almost
                 eliminates the need for bulky, hard plastic pallets.

                 • No more ramps. Flexible sidewalls spring back to form—
                 allows easy drive-in and drive out with a hand truck or forklift.

                 • Reusable! When you‘re done, just fold and place on a shelf.
                 Frees up valuable floor space.



                 SPILLPAL AVAILABLE IN
                 2 DRUM Storage capacity

                 4 DRUM Storage capacity

                 6 DRUM Storage capacity

                 8 DRUM Storage capacity




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                                            Polybund
Containment Systems
High Density Polyethylene

Manufactured in high density
polyethylene (HDPE), providing excellent
chemical resistance. All systems include
containment sump, galvanised steel
grating and removable drainage plug for
simple removal of spillages

   Excellent chemical resistance
   Portable                                  PB 1212A Standard System                   Mesh Grate              HDPE
Legs
   Vertical and horizontal storage           Storage of up to four 205lt drums
   Optional fork tynes, mesh grating
   HDPE legs or rotator system




                                                                                                        Fork Tynes
   Rotator System



                                             PB1212C Two Drum Cradle System
                                             Storage of up to four 205lt drums
                                             Horizontally




                                                                                 Heig
                                                        Length      Width                 Weigh      Capacit
                    Description            Part No                                ht
                                                         mm          mm                    t kg      y litres
                                                                                 mm

                 Standard System           PB1212A        1270       1270        310       54.0        330
                 With mesh grate           PB1212E        1270       1270        310       55.0        330
                  With HDPE legs           PB1212B        1270       1270        350       55.0        330
                With fork tynes            PB1212AF       1270       1270        350       58.0        330


              Two drum cradle System        PB1212C       1270       1270        820       53.5        330
                   With fork tynes          PB1212C       1270       1270        860       57.5        330
                With rotator system        PB1212CR       1270       1270        830       56.0        330
               With fork tynes & rotator   PB1212CX       1270       1270        870       58.0        330




   For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Ramps
                                                                  Designed for heavy duty applications.
                                                                  Insitu concrete is installed to gain the
                                                                  Desired width of ramp. For forklift
                                                                  Applications, wheel base measurements

                                                         Should be as a guide to the
                                                         dimension of cast Insitu concrete required
                                                                        Non porous surface
                                                                        Easy to install, modular ramp
                                                                        Holes for anchoring to floor if
                                                                        required
PR 600 Ramp Modules

                                                                       Length       Width   Height   Weight
                                     Description            Part No
                                                                        mm          mm       mm       kg
                              Ramp Modules(set of 2 )        PR600      1000         600     115      67.0


Containment Systems
‘Polycrete’ Polymer Concrete

All systems include
containment sump, galvanised steel
grating and removable drainage plug for
simple removal of spillages. Manufactured
in Polycrete, offering high mechanical
strength and resistance to most acids and
alkalis.
                                                                                             Fork Tynes
                                             PB1200A Standard System
                                             Storage of up to tw 205 litre drums.


   Excellent chemical resistance
   Portable
   Vertical & Horizontal storage
   Optional fork tynes &rotator system
   Vinylester system with stainless steel
   Grating available for storage of highly
   Corrosive chemicals


                                                                                            Rotator System



                                             PB1200B Single Cradle System
                                             Storage or decanting of one 205 litre
                                             Drum in horizontal position




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Containment Systems

                                                                      Length     Width    Height     Weight   Capacity
                                  Description             Part No
                                                                       mm         mm       mm         kg       litres
                                                                                                                200
                                Standard system          PB1200A        1250       760     320        91.0
                                                                                                                200
                                 With fork tynes         PB1200AF       1250       760     340        93.0

                              Single cradle system        PB1200B       1250       760     850        88.0      200
                                 With fork tynes         PB1200BF       1250       760     890        90.0      200
                              With rotator system        PB1200BR       1250       760     860        89.0      200
                             With fork tynes & rotator   PB1200BX       1250       760     900        91.0      200




Floor Bunding
                                                                    Designed for heavy duty applications
                                                                    Where storage and handling of materials
is
                                                                    Required in a bund or compound and
truck
                                                                    Or forklift access is required.
                                                                        Manufactured from non porous
                                                                        Polycrete
                                                                        Polymer concrete
                                                                        Excellent chemical resistance
                                                                        Available in Vinylester for highly
                                                                        Corrosive chemical bunding
                                                                        Holes for anchoring to floor if
                                                                        required

FB400 (left) FB200 (right) Floor Bunding

                                                                      Length     Width    Height     Weight
                                  Description             Part No
                                                                       mm         mm       mm         kg
                             Floor Bunding               FB200        1200       200      25         9.5
                             Floor Bunding               FB400        1200       400      50         32.0


Tray Systems


Polycrete polymer Concrete
All systems include containment sump,
galvanised steel frame, mesh trays and
removable drainage plug. Bases are
manufactured in Polycrete, offering high
mechanical strength and resistance to
most acids and alkalis                                                                         Fork Tynes
      Excellent chemical resistance
      Portable
      Supplied in kit form for easy assembly       PB1200D Four Tray System
      Optional fork tynes                          Storage for up to eighteen 20 litre
      Vinylester system with stainless steel       Containers
      Grating and frame available for storage
      Highly corrosive chemicals


                                                           PB1200C Three tray system
                                                                    Storage for up to
                                                             twelve 20 litre Containers


For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Tray Systems

                                                             Length     Width   Height   Weight   Capacity
                                                   Part No
                                                              mm         mm      mm       kg       litres
                               Description
                            Three Tray System     PB1200C     1250      760     1360     132.0      200
                             With Fork Tynes      PB1200CF    1250      760     1400     134.0      200

                            Four Tray System      PB1200D     1250      760     1850     148.0      200
                             With Fork Tynes      PB1200DF    1250      760     1890     150.0      200




Galvanised Steel
Galvanised steel, single or multiple tray
System with demountable modular steel
frames. Individual drainage plugs per tray
    Supplied in kit form for easy assembly
    Allows storage of different chemicals
    and various size drums




                                             RTM300 Three Tray System


                                                                           RTM200Two Tray System

                                                             Length     Width   Height   Weight   Capacity
                               Description         Part No
                                                              mm         mm      mm        kg      litres
                            Single Tray System     RTM100     1290       700      100     30.0       90
                             Two tray System       RTM200     1290       710      800     68.0      180
                            Three tray System      RTM300     1290       710     1400     98.0      270




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Storage & Transport

Flexidams / Buoy Walls
A range of portable storage tanks for all types of liquids including oil, potable water and industrial wastes. Available in
either PVC, XR5 (chemical and UV resistant), or puncture resistant nylon-reinforced polyurethane. Flexidams are self
erecting and easy to transport and clean Capacities range from         1,200 litres to 25,000 litres. Optional accessories
include ground sheet / carry bag, top cover, skin fittings (38 mm, 50 mm, 75 mm), ball valves (38 mm, 50 mm, 75 mm)
and hose holder (inside rim of tank), camlock couplings, bridging frame and hold down webs and ground pegs.

Construction materials include:

          Polyester Reinforced PVC 890 g/m2                           Water
          Food Grade PVC/PUR 930g/m2                                  Potable Water
          Polyurethane Coated Nylon 1220g/m2                          Recovered Oil
          Chemically Resistant XR5 1020g/m2                           Industrial Waste

   ITEM #         VOLUME (litres)        DIAMETER (mm)              HEIGHT (mm)                 TOP OPENING (mm)

   75700               1,200                   1,600                     850                           1,000

   75701               2,200                   2,300                     900                           1,125

   75702               5,000                   2,900                    1,150                          1,400

   75703              10,000                   4,000                    1,400                          2,100

   75704              15,000                   5,200                    1,300                          2,900

   75705              25,000                   5,400                    1,300                          3,400

   75706              40,000                   6,200                    2,000                          3,500




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Storage & Transport

Helo-Tanks
The Helo –Tank is a collapsible tank designed primarily to be slung beneath helicopters to cart water or fuel to
remote or inaccessible locations. The specifically designed pod shape of the tank enables stable flight when full or
partially full.



Features:.


    Easy to fill, no assembly required.                           Heavy Duty for in the field handling.
    Stable in-flight.                                             Self-adjusting shape for partial filling
    Folds to a fraction of fill size for storage                  Transportable by land based transport.
    Stable on the ground.




Fabric Pod: Shaping of panels ensures the tank forms an aerodynamic pod shape for in-flight stability. Materials used to
manufacture the fabric pod vary according to the proposed use. Details are as follows:

    Potable Water: Manufactured from multiple layers of US Military Spec Fabric. This tank is highly robust and
    suitable for the containment and transport of drinking water.
    Fire Fighting: Manufactured from heavy duty PVC with a dual layer base this tank is suited for the delivery of salt,
    fresh or retardant treated water to ground personnel.
    Fuel: Manufactured from two layers of heavy duty 32 Oz US Military Spec Fabric, this tank is highly robust and
    suitable for the containment and transport of hydrocarbons.

Lifting Harness: A 9-piece load certified heavy-duty web sling system radiates from the base of the pod passing through
alignment lugs terminating at a single lifting ring. This webbing sling system is designed to cradle the pod without point
loading the fabric. When on the ground or vehicle deck the slings double as guy ropes to stabilise the tank. Different
level attachment rings enables the tank to be stabilised at various full levels. Note each sling component can be
individually replaced.



Pendulum Set: The Helo-Tank is designed for suspended below the helicopter by a typical cargo pendulum set.




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Liquid Storage & Transport



Self-Adjusting Shape: When partially full the Helo-Tank self-adjusting design gathers the excess fabric to maintain a
pod shape. This provides a stable shape for flight at all times and enables the partial offloading to multiple sites.




Fittings: The Helo –Tank is fitted with one 2‖ / 50mm base fitting with brass gate valve for both fill and discharge. A
pressure relief valve is fitted to the top of the tank to vent any air and prevent accidental over filling or condensation .



Optional Extras

Gas/Watertight Zip: A gas/watertight zip can be fitted into the side of the Helo-Tank to provide internal access for
decontamination.


Static Cable: 1 inch lay flat Stainless Steel flexible cable fitted to the webbing harness to provide a link from lifting ring
to below the Helo-Tank for the discharge of static build-up.




   ITEM #          VOLUME (litres)          BASE DIAMETER (m)                   HEIGHT (m)                   WEIGHT (kg)

   HT300                 300                          1.0                            0.5                          20

   HT750                 750                          1.4                            0.75                         23

   HT1000               1,000                         1.4                            0.75                         25

   HT1900               1,900                        1.75                            1.3                          36




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
Containment Systems (Booms)


 Permanent Floatation Barrier
 The Permanent Floatation Barrier (PFB) is designed to prevent harmful pollutants from entering harbours,
 rivers and creeks. Manufactured from heavy duty, chemically and UV resistant XR5, the PFB is hard
 wearing and is suitable for a wide range of applications. XR5 is a tough composite fabric of woven
 polyester that has been molecularly coated to minimise degradation thus making the PFB ideal for long-
 term deployment. If required the PFB can be manufactured with a silt curtain to prevent suspended
 sediments from moving downstream. The PFB is extremely popular with local councils as gross pollutant
 traps installed around stormwater drains.

 Specifications
 Floatation Shape:        Cylindrical
 Overall Height: 500 mm
 Freeboard:               150 mm
 Draft:                   350 mm
 Section Length: 2.5 m (1.88 m folded)
 Segment Length:          10-20 m

 Materials
 Fabric:         Seaman 8130 XR5 1020g/m2
 Ballast:               8 mm galvanised chain
 Colour:                Black
 Floatation:            Closed Cell Polyethylene Foam
 Connectors:            ASTM Standard F962-86

 Applications
  Strong Current
  Tidal Waters
  Rivers
  Streams
  Sheltered Harbour Areas

 Features
  Heavy Duty Construction
  Chemical Resistant
  Long Life XR5 Material
  Galvanised Chain
  All RF Heat Welded

 Accessories
  Repair Kit
  Tow-end brackets
  Anchor Kits




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                      or email us sales@ppiservices.com.au




                            OIL WATER SEPARATORS
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
                                               OIL WATER SEPARATORS – PPI SERVICES PTY LTD
                                               are the licensed NSW and Lower Queensland distributors
                                               for the American designed Facet TM range of Coalescing
                                               Plates for oil and solids removal. This system is generally
                                               accepted internationally as being the most advanced and
                                               efficient method of separating immiscible phases having
                                               differing specific gravities (such as oil and water, solids
                                               and water or both). The superior performance and lower
                                               maintenance costs provided by the patented Facet TM plate
                                               packs ensures that even the most stringent discharge
                                               requirement can be achieved and guaranteed. This
                                               guarantee is also backed by Facet‘s Australian Licensee –
                                               Baldwin Industrial Systems, as well as Facet International
                                               (the world‘s largest filter manufacturer).

                                              The separator systems that we supply are custom designed
                                              to suit the individual needs for any specific application.
                                              Our computer calculation program, developed specifically
                                              for Facet TM Coalescing Plates, allows PPI to accurately
 MP Series Separator with moulded HDPE tank,
                                              predict the performance of a system during the design
    is a cost effective separator for smaller phase, therefore ensuring E.P.A. compliance.          This
                   applications               computer calculation process is based on established Laws
                                              of Chemistry, and forms the basis of our guarantee.
                                              Regardless of the application, PPI can design, supply and
                                              install the best treatment system applicable for your
                                              application.




                  Larger separators are designed to suit application with stainless steel tanks




For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
3 in 1 Wastewater Treatment For
Small to Medium Applications
THREE stages of treatment all housed in one compact unit. That is
what the TT-125 BF wastewater treatment system from Sydney-
based Baldwin Industrial Systems Pty. Ltd., offers producers of small
to medium volumes of difficult to treat wastewaters.

Using a single clay-based chemical to clarify industrial wastewaters containing
oily emulsions, suspended solids, phosphates and heavy metals, the TT-125 BF
system combines the stages of equalisation, flocculation and sludge dewatering
in the one unit.
It is perfectly suited to installation within a workshop environment as it requires
minimal floor space due to there being no chemical batching tanks or other
ancillary equipment associated with its application.
Maintenance requirements are also kept to a minimum due to there being only
two moving parts within the entire system. The unit can process up to 750 litres
of wastewater per hour and is best suited for volumes up to 5000 litres per day.
Typical applications (with proven results) include: P Corrugators, P Ink and
paint wash water, P Vibratory de-burring, P Die-casting, PMetal working, P
Plating, P Equipment and parts washing.

                                          The Treatment Process
                                          Wastewater entering the treatment system is held in a 1140 litre holding tank where pre-
                                          separation of floating oils and settled solids takes place. Following this stage, a submersible
                                          pump in the holding tank (which can be set at varying levels to draw the wastewater from
                                          below the oil and above the sludge layers), transfers the wastewater to the adjacent 475 litre
                                          reaction tank which also houses a 1450 rpm agitator.
                                          Once the reaction tank is filled, the agitator is started and the RM-10 clay-based chemical is
                                          added. After three to five minutes the flocculation process is complete, leaving a clear water
                                          supernatant. Meanwhile, the sludge layer settles to the bottom of the tank.

                                          Following flocculation, the contents of the reaction tank are emptied to the underneath
                                          bandfilter which is made of stainless steel weave and holds a disposable filter media in place
                                          for separation of the sludge and water. The water drains to a collection tank (200 litre), and is
                                          piped directly to the sewer or a recycle tank. The sludge builds up on the filter media and the
                                          bandfilter is advanced forward allowing spadable, dewatered sludge and filter media to fall
                                          into a sludge hopper where it is stored prior to removal and disposal.


Joy Mining Machinery
One of a number of installations for the Baldwin technology is the unit employed by Joy Mining Machinery for the treatment and disposal
of the solcenic oil which powers the hydraulic components of its longwall mining (coal) systems. The hydraulic power source (a fire-
resistant white coloured emulsion of mineral oil and water) is used in considerable volumes - up to 16,000 litres per longwall system. Due
to its composition, the waste solcenic oil and water emulsion cannot be separated using a conventional tilted plate oil water separator.
Rather, a specialised wastewater treatment system is required to treat and ‘break’ the emulsion prior to its disposal.

Traditionally, the emulsion was stored in an onsite tank which, once full, would be periodically pumped out - the solcenic oil and
wastewater taken off site by a waste removal contractor. This method incurred a ‘pump out’ fee as well as a ‘disposal charge’ which
contributed to the company’s operating costs. Storage of contaminated solcenic oil can present further problems should it start to partially
deteriorate, as it produces unpleasant odours.

In an attempt to address the issue, Joy Mining commissioned
Baldwin Industrial Systems to come up with a solution, the
initial component of which was on-site and laboratory tests.
The results of the tests, enabled Joy Mining to determine the
most suitable combination of treatment, equipment and
chemicals to meet their needs. The resultant packaged
system was a semi-automatic continuous batch CE 100GM
unit using a CETCO RM-10 clay based formulation. The
unit operates very similarly to the TT-125 BF, but on a
larger scale. Installed at Joy Mining‘s Moss Vale plant, the
first unit is safely treating the refuse solcenic oil at the source. The treated clean water is of suitable quality
to be discharged directly to the sewer system and, in most cases, the sludge produced can be disposed
of directly to landfill. Joy have also purchased two additional units for their other sites.

For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au
For Further Information Contact PPI Services on 02 4950 2023 or email sales@ppiservices.com.au

				
DOCUMENT INFO