Viscous Fan - RA Removing and installing or replacing fan coupling by dfsiopmhy6

VIEWS: 8 PAGES: 1

									                                                             11 52 020        Removing and installing or replacing fan
                                                                              coupling (M62)



                                                             Caution!
                                                                 Left-hand threads.
                                                             Using special tool 11 5 050 brace against pulley and
                                                             unfasten cap nut from water pump using special
                                                             tool 11 5 040.
                                                             Remove fan wheel with fan coupling from water pump.




                                                             Installation:
                                                                 Tighten down fan wheel using special tool 11 5 040.
                                                                 Tightening torque,
                                                                 refer to Technical Data 11 52 1AZ
                                                             Note:
                                                                When using special tool 11 5 040, 30 Nm on the torque
                                                                wrench scale are equivalent to a tightening torque of
                                                                40 Nm.




                                                             Unfasten screws and detach fan from fan coupling.




RA Removing and installing or replacing fan coupling (M62)                            BMW AG - TIS             23.05.2008 21:01
Issue status (01/2005) Valid only until next CD is issued                             Copyright                       Page - 1 -

								
To top