How to use VideoWave software to capture video with DSC-350 1) Start up MGI VideoWave software 2) Click onto the “capture” button which is located at left-down corner of the screen (Hint: you should see the Capture being shown in the diagram)
3) After the click, the screen should appear with your image like shown below.
4) Go and click onto “Setting” button on the right. And you should able to see “DLink, WDM Video Capture …” under the Source tab.
5) Goto “Video Template” and “Create” a new template for your new video. Then click “Next”
6) Choose your own setting for the video or you may retain the default setting.Then click on “Finish”
7) Click on “OK” to save the setting.
8) Click on “ Video+Audio” or “Video” under Start Capture to start the video capturing.
9) To stop capturing, just click onto “Stop” button.
10) After this, on the left hand corner, you should see this new video file created.(In my example, it will be NONAME_000)
11) To play this file, you may just double-click onto this new file and use the “Play” control on the right-hnd corner.