Move various type of face to various direction
Use Direct Modeling to edit face and feature in Unigraphics
Move face in Direct Modeling
Introduction
Direct Modeling use in Move face Edit diameter or radius Replace face Offset region or face Delete face Resize blend dimension Scale body Constraint face
Direct modeling commonly use to edit face and some face feature, when some modeling and the feature already done, and parameter was removed, we can edit the parameter directly but use direct modeling we can edit face and the feature parameter although parameter was deleted (remove parameter)
Toolbar
Toolbar direct modeling is like picture below
From right to left Move face Offset region Replace face Pattern face Delete face Resize blend Resize face Scale Body Constraint face
Let’s learn How To Move Face
Remove parameter first
On this model all parameter was removed, to remove the parameter, use edit feature First Remove parameter your 3D model to ma ke sure that move face operation can use in un parameterize object icon than select remove parameter, see picture below
Just click that icon, dialog box remove parameter will appear
Select the body, sheet or everything to remove parameter in your 3D model, then click OK, message box will appear, click OK to proceed remove parameter.
Move Face Click move face icon Select face After you familiar with direct modeling toolbar, first click move face icon
Dialog Box Move face For example select At distance blend write face and box, radius face like picture or right the distance in just leave it side default by below
Default distance of move face dialog box is the latest distance that was filled distance by Adjust in distance direct fill the box at dialog box. distance box, or just drug the small green We can adjust arrow the distance directly after selecting face
example selecting face
Select face
For example select face and blend radius face like picture in right side below
Adjust distance by direct fill the box at distance box, or just drug the small green arrow
Before move face
After move face
Below is other sample, move face with minus dimension value Select face
Drag the green arrow or fill the dimension box by -6 then click OK Move face on progress Result of move face