Pdf tufted brushes

Document Sample
Pdf tufted brushes Powered By Docstoc
					                                                                                                   BRUSH SOLUTIONS

    Product                                                                                                                           Page 1
    Information



                             Punched knot brush


      For more information   Punched knot brushes are manufactured to order using tufts of filaments punched or drawn into a
            Phone
                             plastic, wooden or metal core. Brushes are supplied in varying widths and lengths, more suited to
     0117 958 2450           creating wider surface areas than brushstrip. Punched knot brushes can also be supplied on disc or
            Or visit
                             circular cores for rotary applications.
    www.ksltd.com

                             Type 82
                             Punched knot circular brush                               Type 89
                                                                                       Punched knot disc brush




                                                                                 Type 88
                                                                                 Punched knot lath brushes



                             Lath brush                             Disc brush
                                                               BH




                                                                                                          BH
                                                           B




                                                                                                  B




                             Straight knot pattern
                                                           C




                                         A

                             Staggered knot pattern


                                                                                 D




                              How to specify                        How to specify                             Features
                              Lath brushes                          Disc or circular brushes
                              Specify the following together with   Specify the following together with        • Variety of designs, fill
                              additional requirements according     additional requirements according            densities and knot
                              to your application:                  to your application:                         configurations
                                  Core material                         Core material                          • Plastic, wooden, steel or
                                  Core length (A)                       Core diameter (D)                        aluminium core
                                  Core width (C)                        Bore diameter (if applicable)
                                                                                                               • Punched, hand drawn or
Kleeneze Sealtech Limited         Core thickness (B)                    Core thickness (B)                       resin set tufts
    Ansteys Road, Hanham          Fill material                         Fill material
          Bristol BS15 3SS        Brush height (BH)                     Brush height (BH)
                                                                                                               • Extensive range of fill
                                                                                                                 materials.
   Tel +44 (0)117 9582450         Knot pattern (number of rows x        Knot pattern (number of rows x
  Fax: +44 (0)117 960 0141        number of knots per row)              number of knots per row)               • Strip and refill service
  Email: sales@ksl.uk.com
      Web: www.klstd.com
                                                                                                        BRUSH SOLUTIONS

    Product                                                                                                                               Page 2
    Information



                             Punched knot brush


      For more information
            Phone            Technical notes

     0117 958 2450           Construction
            Or visit         Filament tufts may be punched, hand drawn or resin set into the brush core depending on the core material
    www.ksltd.com            Fill materials
                             To ensure best performance, the selection of the fill material is of paramount importance. Characteristics such as
                             bend recovery, resistance to abrasion and chemicals are available on request. Minimum orders may apply on
                             certain materials and colours.
                             SYNTHETICS
                             NYLON - Durable general purpose filament with good bend recovery, flex life and abrasion resistance.
                             Max temp 120ºC. Available in heat stabilised grades.
                             NYLON CONDUCTIVE - Properties of standard Nylon with a conductive coating for anti-static applications.
                             NYLON FR(H) - Fire retardant Nylon with low smoke density and zero halogens.
                             NYLON ABRASIVE - Abrasive impregnated filament for deburring and cleaning. Good fatigue and chemical
                             resistance. Grit size 60 - 800 (SIC) or (ALO)
                             POLYPROPYLENE - Good chemical resistance with less water absorption than Nylon. Max temp 60ºC.
                             POLYESTER - Excellent filament with good stiffness, bend recovery and abrasion resistance. Particularly suit-
                             able for wet applications. Max temp 100ºC

                             NATURAL MATERIALS
                             HORSEHAIR, BRISTLE, and GOAT HAIR - Excellent resistance to taking a set, good bend recovery and
                             resistance to sunlight. Soft to medium stiffness.

                             METALLICS
                             STEEL - Crimped or flat wire.
                             STAINLESS STEEL - Crimped wire AISI304
                             PHOS BRONZE, BRASS, NI SILVER - Crimped wire




                             Abrasive disc brushes            Variety of lath brushes               Selection of standard lath brush
                             used to deburr machined                                                profiles used for material transfer
                             components.




Kleeneze Sealtech Limited
    Ansteys Road, Hanham
          Bristol BS15 3SS
   Tel +44 (0)117 9582450
  Fax: +44 (0)117 960 0141
  Email: sales@ksl.uk.com
      Web: www.klstd.com

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:7
posted:2/12/2011
language:English
pages:2