Docstoc

ESCAPE HARDWARE

Document Sample
ESCAPE HARDWARE Powered By Docstoc
					ESCAPE HARDWARE
                                                                                             Introduction




 Introduction                                                  Guarantee
                                                              UNION products are guaranteed for 1 year from
  UNION offers a range of escape hardware, suitable           the date of purchase against mechanical faults
  for use in public, commercial, institutional, industrial    arising from defects in materials or design. In the
  and residential buildings.                                  unlikely event of your UNION product failing as a
                                                              result of defective materials or design a free
                                                              replacement product will be provided.

                                                              It is a condition of this guarantee that your UNION
                                                              product:
   Note                                                            •    Has been correctly installed and
                                                                        maintained in accordance with the
                                                                        instructions provided to you at
   We have made every effort to ensure that at the
                                                                        the time of purchase
   time of going to print all information in this catalogue
                                                                   •    Has not been modified in any way
   is correct. However, in our efforts to continually
   improve our products and offer only the highest            This guarantee does not apply to mechanical faults
   levels of security and quality we reserve the right        caused wilfully or negligently, or to the surface
   to make alterations to the product specifications          finish of your product.
   shown in this catalogue.
                                                              Proof of purchase must be submitted when making
   All dimensions provided within this catalogue are          a claim under this guarantee and all claims must
                                                              be submitted within 2 months of you discovering
   approximate and for guidance only.
                                                              the mechanical fault of your UNION product.




   Keying Options
   (Applies to outside access devices in this section)


To Differ (i.e. Standard)                                     Keyed Alike

   “To Differ (i.e. Standard)” – indicates locks can be       “Keyed Alike” – indicates that designated locks
   supplied with a standard range of different keys.          can be manufactured to be operated by a single
   The range of different keys available with Pin tumbler     standard key. Locks are described as being “Keyed
   cylinders is approximately 5000                            Alike to Standard Differs”. Alternatively, designated
                                                              locks under a master key or grand master key
                                                              system can also be keyed alike. These are described
                                                              as being “Keyed Alike under Master Key” or “Keyed
                                                              Alike under Grand Master Key”.
                                                                                                              Introduction



Master Keyed                                                              Grand Master Keyed
“Master Keyed” – indicates that designated locks can                       “Grand Master Keyed” – indicates that designated
be operated by two different keys, one, the “Servant                       locks can be operated by three or more different keys,
key” operates individual locks whilst the “Master Key”                     one, the “Servant key” operates individual locks whilst
operates all locks. (This group of locks are referred to                   the “Grand Master Key” operates all locks. (The locks
as a “Suite”, hence the term “en-suite” locks). There                      can be grouped into two or more different “Sub Suites”
are limitations to the number of locks that can be                         where a “Sub Master Key” opens those in a particular
master keyed in a single suite. We recommend that                          Sub Suite). The tern “en-suite” is also applied to locks
you consult your Assa Abloy technical sales consultant                     in this configuration. There are limitations to the number
in this regard. For a schematic representation of a                        of locks that can be master keyed in a single suite
Master Keyed system refer figure 1.                                        and to the number of Sub Suites in such a system.
                                                                           We recommend that you consult your Assa Abloy
                                                                           technical sales consultant in this regard. For a
                                                                           schematic representation of a Grand Master Keyed
                                                                           system refer figure 2.




                                                                                       Grand Master Key



               Master Key                                   Sub Master Key A                                   Sub Master Key B




  Lock 1         Lock 2         Lock 3         Lock 1           Lock 2            Lock 3             Lock 4        Lock 5         Lock 6


      Master Keyed - Figure 1                                                  Grand Master Keyed - Figure 2




    Only locks having identical mechanisms can be keyed into a common Keying System, i.e. “Master
    Keyed”, “Grand Master Keyed” or “Keyed Alike”. To assist the specifier in identifying locks with identical
    Keying Systems, we have introduced different coloured symbols in the Cylinder Selection Chart as
    well as in the Specification Tables, on the following pages. Locks with identical mechanisms will have
    identical coloured symbols.




   Common Keying System Symbols

                     Pin Tumbler Cylinder

                     Pin Tumbler Cylinder (different from      above)



                                                                                                                                           1
                                                                                    Cylinder Selection Chart



    Euro Profile Single Cylinders
            Length




                                               Keyed to




                                                                                        Master




                                                                                                    Master
                                                                    Keyed




                                                                                        Keyed




                                                                                                    Keyed
                                                                                                    Grand
                                                Differ




                                                                    Alike
                 Product
            Reference Options


            2x20
            Material and Finishes:
            Brass - CH (Chrome)
                     PL (Brass Polished)
                     SC (Satin Chrome)
                    A Length: 32mm         2x20CH              2x20CHKA              2x20CHMK    2x20CHGMK
                                           2x20PL              2x20PLKA              2x20PLMK    2x20PLGMK
                                           2x20SC              2x20SCKA              2x20SCMK    2x20SCGMK
                                               Keyed to




                                                                                        Master




                                                                                                    Master
                                                                    Keyed




                                                                                        Keyed




                                                                                                    Keyed
                                                                                                    Grand
                                                Differ




                                                                    Alike




          Product
           Code


         2x812
         Material and Finishes:
         Brass - PL (Brass Machined)
                  NP (Nickel Plated)

                 A Length: 32mm            2x812PL            2x812PLKA             2x812PLMK    2x812PLGMK
                                           2x812NP            2x812NPKA             2x812NPMK    2x812NPGMK




     F u n c t i o n s a n d F e a t u re s
    Products that meet BS EN 179 (i.e. emergency exit device) should only be used where building occupants
    are familiar with the emergency exit and it’s hardware and where panic situations are not forseen. If there
    is any doubt about conditions relating to the building occupancy, then devices covered by BS EN 1125 (i.e.
    panic devices) should be used.


    Types of Escape Hardware

                  Panic Bolt                              Panic Latch
                  Two point locking                       Single point locking
                  for single doors                        for single doors


                 Double Panic Bolt                        One Point Push Pad
                 For double rebated                       Emergency escape
                 doors                                    device for single doors

2
                                                                  803DMG



Panic Latch

Application
• Suitable for single action doors, hinged left
  and right
• Suitable for timber and metal doors
• For single leaf doors

Standards
• CEN EN1125            Ref: 37611322A
• Made in the UK




  Specifications

  Product Reference                  803DMG

  Number of Locking Points           1

  Housing Material and Finish        Mazak Alloy - Grey Painted

  Push Bar Material and Finish       Steel - Grey Painted

  Max. Door Height                   2440mm
  Max. Door Width                    1400mm
  Outside Access Device (optional)   8040
  PWD Reference Number               Not Applicable




                                                                           3
                                                                         801DMG



    Panic Bolt

    Application
    • Suitable for single action doors, hinged left
      and right
    • Suitable for timber and metal doors
    • For single leaf doors and double leaf doors
      with flush meeting stiles (for latter application
      specify 2 of)

    Features
    • Automatic dogging device retains rods in
      retracted position when horizontal bar is
      depressed and the door opened
    • Trigger mechanism activates vertical rods
      when the door closes and ensures they
      engage in door frame and floor

    Standards
    • CEN EN1125            Ref: 37611322A
    • Made in the UK




       Specifications

       Product Reference                    801DMG

       Number of Locking Points             2

       Housing Material and Finish          Mazak Alloy - Grey Painted

       Push Bar Material and Finish         Steel - Grey Painted

       Max. Door Height                     2440mm
       Max. Door Width                      1400mm (leaf width)
       Outside Access Device (optional)     8040
       PWD Reference Number                 Not Applicable




4
                                                                  802DMG



Double Panic Bolt
Application
• Suitable for single action doors (active leaf
  hinged left and right)
• Suitable for timber and metal doors
• For double leaf doors with rebated meeting
  stiles

Features
• Automatic dogging device retains rods in
  retracted position when horizontal bar is
  depressed and the door opened
• Trigger mechanism activates vertical rods
  when the door closes and ensures they engage
  in door frame and floor

Standards
• CEN EN1125           Ref: 37611322A
• Made in the UK




  Specifications

  Product Reference                  802DMG

  Number of Locking Points           3

  Housing Material and Finish        Mazak Alloy - Grey Painted

  Push Bar Material and Finish       Steel - Grey Painted

  Max. Door Height                   2440mm
  Max. Door Width                    1400mm (leaf width)
  Outside Access Device (optional)   8040
  PWD Reference Number               Not Applicable




                                                                           5
                                                                                                           8040



    Outside Access Device
    Application
    • Suitable for use with 801DMG, 802DMG and
      803 DMG panic exit devices

    Features
    • Knob, when unlocked with key, retracts panic
      bolt / latch
    • Knob freewheels when locked with key

    Standards
    • Made in the UK




      Specifications

      Product Reference                8040

      Body Material and Finish         Mazak Alloy - Grey Painted
      Keying Options                   Available Keyed to Differ (ie Standard), Keyed Alike, Master Keyed or
                                       Grand Master Keyed
      PWD Reference Number             Not Applicable




6
                                                                                                                      806



Panic Latch

Application
• Suitable for single action doors, hinged left
  and right
• Suitable for timber and metal doors
• For single leaf doors

Features
• Supplied with Pullman latch
• Available with microswitch on request
  (Product Reference 806MS)

Standards
• CEN EN1125           Ref: 37501321A




  Specifications

  Product Reference                  806

  Number of Locking Points           1

  Housing Material and Finish        Zinc Plated Steel - Black Painted

  Push Bar Material and Finish       Steel - Red Painted

  Max. Door Height                   2440mm
  Max. Door Width                    1400mm (leaf width)
  Outside Access Device (optional)   812
                                     For electronic access control, combine panic latch with eff eff 76-45-S911G electric
                                     striking plate (low voltage electrical power and activator specified by others)

  PWD Reference Number               Not Applicable



                                                                                                                            7
                                                                               807



    Two or Three Point Locking Panic Bolt
    Application
    • Suitable for single action doors, hinged left
      and right
    • Suitable for timber and metal doors
    • For single leaf doors and double leaf doors
      with flush meeting stiles (for latter application
      specify 2 of)
    Features
    • Supplied with Pullman latches
    • Three point locking (lateral, top and bottom)
      supplied as standard.
    • For two point locking (top and bottom), block
      off lateral latch with plastic cover supplied.
    • Available with microswitch on request. For
      product reference, add the letters MS after
      the first three digits of the part number e.g.
      807MS-2200
    Standards
    • CEN EN1125      Ref: 37501321A
    • Doors higher than 2500mm fall outside the
      scope of CEN1125
    • Made in the EU




      Specifications

      Product Reference                    807-2200 and 807-2800

      Number of Locking Points             2 or 3 (per panic device)

      Housing Material and Finish          Zinc Plated Steel - Black Painted

      Push Bar Material and Finish         Steel - Red Painted

      Bolt Material and Finish             Steel - Black Painted
                                           807-2200 is 2200mm
      Max. Door Height                     807-2800 is 2800mm
      Max. Door Width                      1400mm (leaf width)
      Outside Access Device (optional)     812
      PWD Reference Number                 Not Applicable


8
                                                                                   808



Three Point Locking Double
Panic Bolt
Application
• Suitable for single action doors (active
  leaf hinged left and right)
• Suitable for timber and metal doors
• For double leaf doors with rebated meeting
  stiles
Features
• Supplied with Pullman latches
• Three point locking (lateral, top and bottom)
  supplied as standard. On the unit fitted
  to the inactive leaf, this must be converted
  to two point locking (top and bottom),
  by blocking off lateral latch with plastic
  cover supplied
• Single point locking (lateral) on unit fitted
  to active leaf
• Available with microswitch on request.
  For product reference, add the letters
  MS after the first three digits of the part
  number e.g. 808MS-2200
Standards
• CEN EN1125      Ref: 37501321A
• Doors higher than 2500mm fall outside
  the scope of CEN1125
• Made in the EU




* For details of top and bottom junctions refer to page 8

   Specifications

   Product Reference                           808-2200 and 808-2800

   Number of Locking Points                    3

   Housing Material and Finish                 Zinc Plated Steel - Black Painted

   Push Bar Material and Finish                Steel - Red Painted

   Bolt Material and Finish                    Steel - Black Painted
                                               808-2200 is 2200mm
   Max. Door Height                            808-2800 is 2800mm
   Max. Door Width                             1400mm (leaf width)
   Outside Access Device (optional)            812
   PWD Reference Number                        Not Applicable


                                                                                         9
                                                                                                                          809



     Panic Push Bar with
     Dogging Device
     Application
     • Suitable for single action doors, hinged left
       and right
     • Suitable for timber and metal doors
     • For single leaf doors

     Features
     • Auto-blocking lateral latch is secure from
       illicit attack from outside
     • Manually operated dogging device retains
       latch in retracted position allowing door to
       be free swinging
     • Activation and deactivation of dogging device
       by simple key
     • Available with microswitch on request. For
       product reference, add the letters MS after
       the first three digits of the part number e.g.
       809MS-840R

     Standards
     • CEN EN1125           Ref: 37501322B
     • Made in the EU




       Specifications
                                          809-840R and 809-840AS
       Product Reference                  809-1200R and 809-1200AS
       Number of Locking Points           1

       Housing Material and Finish        Zinc Plated Steel - Black Painted

       Push Bar Material and Finish       R (Red Painted Aluminium), AS (Anodised Silver Aluminium)
                                          809-840 is 840mm
       Push Bar Length                    809-1200 is 1200mm
       Max. Door Height                   2400mm
       Max. Door Width                    1400mm
       Outside Access Device (optional)   812
                                          For electronic access control, combine panic latch with eff eff 76-45-S911G electric
                                          striking plate (low voltage electrical power and activator specified by others)

       PWD Reference Number               Not Applicable

10
                                                                                                             810



Two or Three Point Locking Panic
Push Bar with Dogging Device
Application
• Suitable for single action doors, hinged left
  and right
• Suitable for timber and metal doors
• For single leaf doors and double leaf doors
  with flush meeting stiles (for latter application
  specify 2 of)
Features
• Three point locking (lateral, top and bottom)
  supplied as standard, for two point locking
  (top and bottom), block off lateral latch with
  plastic cover supplied.
• Auto-blocking lateral latch and Pullman
  latches top and bottom are secure from illicit
  attack from outside
• Manually operated dogging device retains
  latch in retracted position allowing door to
  be free swinging
• Activation and deactivation of dogging device
  by simple key
• Available with microswitch on request. For
  product reference, add the letters MS after
  the first three digits of the part number e.g.
  810MS-840
Standards
• CEN EN1125      Ref: 37501322B
• Doors higher than 2500mm fall outside the
  scope of CEN 1125
• Made in the EU
* For details of top and bottom junctions refer to page 8
** For details of junction between lateral latch and keep refer to page 12

   Specifications
                                                810-840-2200R and 810-840-2800R, 810-840-2200AS and 810-840-2800AS
   Product Reference                            810-1200-2200R, 810-1200-2800R, 810-1200-2200AS and 810-1200-2800AS
   Number of Locking Points                     2 or 3 (per panic device)

   End Housing Material and Finish              Zinc Plated Steel - Black Painted

   Push Bar Material and Finish                 R (Red Painted Aluminium), AS (Anodised Silver Aluminium)
                                                810-840-... is 840mm
   Push Bar Length                              810-1200-... is 1200mm
   Max. Door Height                             810-... -2200 is 2200mm
                                                810-... -2800 is 2800mm
   Max. Door Width                              1400mm
   Outside Access Device (optional)             812
   PWD Reference Number                         Not Applicable


                                                                                                                      11
                                                                                                                  820



     Three Point Locking Panic Push
     Bar with Dogging Device
     Application
     • Suitable for single action doors (active leaf
       hinged left and right)
     • Suitable for timber and metal doors
     • For double leaf doors with rebated meeting
       stiles
     Features
     • Three point locking (lateral, top and bottom)
       supplied as standard. On the unit fitted to
       the inactive leaf, this must be converted to
       two point locking (top and bottom), by blocking
       off lateral latch with plastic cover
     • Auto-blocking lateral latch (to unit fitted to
       active leaf) and Pullman latches top and bottom
       are secure from illicit attack from outside
     • Manually operated dogging device retains
       latch in retracted position allowing door to
       be free swinging
     • Activation and deactivation of dogging device
       by simple key
     • Available with microswitch on request. For
       product reference, add the letters MS after
       the first three digits of the part number e.g.
       820MS-840-2200R
     Standards
     • CEN EN1125      Ref: 37501322B
     • Doors higher than 2500mm fall outside the
       scope of CEN 1125
     • Made in the EU

                          * For details of top and
                            bottom junctions refer
                            to page 8


       Specifications
                                                     820-840-2200R, 820-840-2800R, 820-840-2200AS and 820-840-2800AS
       Product Reference                             820-1200-2200R, 820-1200-2800R, 820-1200-2200AS and 820-1200-2800AS
       Number of Locking Points                      3

       End Housing Material and Finish               Zinc Plated Steel - Black Painted

       Push Bar Material and Finish                  R (Red Painted Aluminium), AS (Anodised Silver Aluminium)
                                                     820-840-... is 840mm
       Push Bar Length                               820-1200-... is 1200mm
       Max. Door Height                              820-... -2200 is 2200mm
                                                     820-... -2800 is 2800mm
       Max. Door Width                               1400mm (leaf width)
       Outside Access Device (optional)              812
       PWD Reference Number                          Not Applicable


12
                                                                                                            812



Outside Access Device

Application
• Suitable for use with 806, 807,808, 809, 810
  and 820 panic exit devices

Features
• Lever handle, when unlocked with key, retracts
  panic bolt / latch
• Lever Handle is fixed in locked condition

Standards
• Made in the EU




  Specifications

  Product Reference                 812

  Body Material and Finish          Mazak Alloy - Black Painted
  Keying Options                    Available Keyed to Differ (ie Standard), Keyed Alike, Master Keyed or
                                    Grand Master Keyed
                                          Specify with 2x20 Cylinder
                                          Specify with 2x812 Cylinder
  PWD Reference Number              Not Applicable




                                                                                                                  13
                                                                                                                1910908



     Panic Latch

     Application
     • Suitable for single action doors, hinged
       left and right
     • Suitable for timber and metal doors
     • For single leaf doors

     Features
     • Supplied with Pullman latch
     • Supplied with a 900mm long horizontal
       bar as standard giving an overall unit
       width of 1020mm. Additional item ref
       BARH1400 (1400mm long horizontal bar)
       to be specified where door construction
       dictates fixing centres of between 1000mm
       and 1500mm (available in NV finish only)

     Standards
     • CEN EN1125           Ref: 3751322A
     • Made in the EU




       Specifications

       Product Reference                    1910908NV and 1910908NI

       Number of Locking Points             1

       Housing Material and Finish          Zinc Plated Steel - Black Painted

       Push Bar Material and Finish         NV (Green Painted Steel), NI (Brushed Stainless Steel)

       Max. Door Height                     2500mm
       Max. Door Width                      1020mm (1500mm with additional item ref. BARH1400-suits 1910908NV only)
       Outside Access Device (optional)     MMPP2T5PL - Swing Knob and MMPP4T5PL - Fixed Knob
                                            For electronic access control, combine panic latch with eff eff 76-45-S911G electric
                                            striking plate (low voltage electrical power and activator specified by others)

       PWD Reference Number                 Not Applicable



14
                                                                                                 TP91008NV



One Point Push Pad

Application
• Suitable for single action doors, hinged left
  and right
• Suitable for timber and metal doors
• For single leaf doors
• We recommend that the relevant Building
  Authorities in your area shall be consulted
  concerning conditions under which they will
  accept the use of this product.

Features
• Supplied with Pullman latch

Standards
• Made in the EU




  Specifications


  Specifications

  Product Reference                  TP91008NV

  Number of Locking Points           1

  Housing Material and Finish        Zinc Plated Steel - Black Painted

  Push Bar Material and Finish       Mazak Alloy - Green Painted

  Max. Door Height                   2500mm
  Max. Door Width                    1500mm
  Outside Access Device (optional)   MMPP2T5PL - Swing Knob and MMPP4T5PL - Fixed Knob
                                     For electronic access control, combine push pad with eff eff 76-45-S911G electric
                                     striking plate (low voltage electrical power and activator specified by others)

  PWD Reference Number               Not Applicable



                                                                                                                         15
                                                                                                     1930908



     Panic Bolt
     Application
     • Suitable for single action doors hinged left
       and right
     • Suitable for timber and metal doors
     • For single leaf doors and double leaf doors
       with flush meeting stiles (for latter application
       specify 2 of)

     Features
     • Supplied with Pullman latches
     • Supplied with a 900mm long horizontal bar
       as standard giving an overall unit width of
       1020mm. Additional item ref BARH1400
       (1400mm long horizontal bar) to be specified
       where the door construction dictates fixing
       centres of between 1000mm and 1500mm
       (available in NV finish only)

     Standards
     • CEN EN1125      Ref: 3751322A
     • Doors higher than 2500mm fall outside the
       scope of CEN 1125
     • Made in the EU




       Specifications

       Product Reference                    1930908NV and 1930908NI

       Number of Locking Points             2 (per panic device)

       Housing Material and Finish          Zinc Plated Steel - Black Painted

       Push Bar Material and Finish         NV (Green Painted Steel), NI (Brushed Stainless Steel)

       Max. Door Height                     2210mm (3050mm with additional item ref. BARV3050N suits 1930908NV only)
       Max. Door Width                      1020mm (1500mm with additional item ref. BARH1400-suits 1930908NV only)
       Outside Access Device (optional)     MMPP2T5PL - Swing Knob
       PWD Reference Number                 Not Applicable




16
                                                                                              1940908



Double Panic Bolt
Application
• Suitable for single action doors (active leaf
  hinged left and right)
• Suitable for timber and metal doors
• For double leaf doors with rebated meeting
  stiles
Features
• Supplied with Pullman latches
• Supplied with a 900mm long horizontal bar
  as standard giving an overall unit width
  of 1020mm. Additional item ref BARH1400
  (1400mm long horizontal bar) to be specified
  where the door construction dictates fixing
  centres of between 1000mm and 1500mm
  (available in NV finish only)
Standards
• CEN EN1125      Ref: 3751322A
• Doors higher than 2500mm fall outside the
  scope of CEN 1125
• Made in the EU




  Specifications

  Product Reference                  1940908NV and 1940908NI

  Number of Locking Points           3

  Housing Material and Finish        Zinc Plated Steel - Black Painted

  Push Bar Material and Finish       NV (Green Painted Steel), NI (Brushed Stainless Steel)

  Bolt Material and Finish           NV (Black Painted Steel), NI (Brushed Stainless Steel)

  Max. Door Height                   2210mm (3050mm with additional item ref. BARV3050N-suits 1940908NV only)
  Max. Door Width                    1020mm (1500mm with additional item ref. BARH1400-suits 1940908NV only)
  Outside Access Device (optional)   MMPP2T5PL - Swing Knob and MMPP4T5PL - Fixed Knob
  PWD Reference Number               Not Applicable



                                                                                                                17
                                                                                           MMPP2T5PL



     Outside Access Device

     Application
     • Suitable for use with 1910908, TP91008,
       1930908 and 1940908 panic exit devices

     Features
     • Knob, when unlocked with key, retracts panic
       bolt / latch
     • Knob is rigid when locked with key

     Standards
     • Made in the EU




       Specifications

       Product Reference                MMPP2T5PL

       Body Material and Finish         Zinc Plated Steel - Grey Painted
       Keying Options                   Available Keyed to Differ (ie Standard), Keyed Alike, Master Keyed or
                                        Grand Master Keyed
                                           Specify with 2x20 Cylinder
                                           Specify with 2x812 Cylinder
       PWD Reference Number             Not Applicable




18
                                                                                       MMPP4T5PL



Outside Access Device

Application
• Suitable for use with 1910908, TP91008
  and 1940908 panic exit devices

Features
• Key retracts panic latch
• Knob is always rigid and acts as pull handle only

Standards
• Made in the EU




  Specifications

  Product Reference                MMPP4T5PL

  Body Material and Finish         Zinc Plated Steel - Grey Painted
  Keying Options                   Available Keyed to Differ (ie Standard), Keyed Alike, Master Keyed or
                                   Grand Master Keyed
                                      Specify with 2x20 Cylinder
                                      Specify with 2x812 Cylinder
  PWD Reference Number             Not Applicable




                                                                                                           19
Notes
Notes

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:43
posted:2/11/2011
language:English
pages:24