CERTIFICATE OF APPROVAL No CF 762 FUJAIRAH ROCKWOOL FACTORY

Document Sample
CERTIFICATE OF APPROVAL No CF 762 FUJAIRAH ROCKWOOL FACTORY Powered By Docstoc
					                  CERTIFICATE OF APPROVAL
                          No CF 762
                              This is to certify that, in accordance with
                TS00 General Requirements for Certification of Fire Protection Products
                                  The undermentioned products of



              FUJAIRAH ROCKWOOL FACTORY
                                        P. O. Box 211
                                           Fujairah
                                    United Arab Emirates
                  Tel: int +971-9-2222297               Fax: int +971-9-2222573
                  Have been assessed against the requirements of the Technical Schedule(s)
                      denoted below and are approved for use subject to the conditions
                                             appended hereto:




              CERTIFIED PRODUCT                          TECHNICAL SCHEDULE

              Fujairah Rockwool Slab                    TS40 Linear Gap Sealing
                  Linear Gap Seal                      Systems & TS20 Restricted
                                                            Combustibility


Signed and sealed for and on behalf of CERTIFIRE




Sir Ken Knight                            Issued: 10th November 2010
Chairman - Management Council             Valid to: 9th November 2015

Page 1 of 3
                  CERTIFICATE No CF 762
              FUJAIRAH ROCKWOOL FACTORY

Fujairah Rockwool Slab Linear Gap Seal
1.     This approval relates to the use of Fujairah Rockwool Slab linear joint sealing systems for
       the fire protection of movement joints within walls. The detailed scope is given in the
       Approval Matrix included in this Certificate. This shows the thickness, width and
       reference for Fujairah Rockwool Slab linear joint sealing systems required to provide fire
       resistance periods in accordance with BS EN 1366-4: 2006 of up to 60 minutes for wall
       constructions.

2.     This certification is designed to demonstrate compliance of the product or system
       specifically with Approved Document B (England and Wales), Section 2 of the Technical
       Standards (Scotland), Technical Booklet E (N. Ireland). If compliance is required to other
       regulatory or guidance documents there may be additional considerations or conflict to
       be taken into account.’

3.     The product is approved on the basis of:

       i)      Initial type testing
       ii)     Audit testing at the frequency specified in TS40
       iii)    A design appraisal against TS40
       iv)     Inspection and surveillance of factory production control
       v)      Certification of quality management system to ISO 9001: 2008

3.     The block/masonry/concrete walls shall be at least 200 mm thick and have at least the
       same fire rating as that required for the joint seal.

4.     Block/masonry and concrete gap faces will be within the density range of 450 to
       2300kg/m3, and gap faces will be free from loose or flaking material.

5.     The approval relates to ongoing production. Product and/or its immediate packaging is
       identified with the manufacturers’ name, the product name or number, the CERTIFIRE
       name or name and mark, together with the CERTIFIRE certificate number and
       application where appropriate.

       Further information regarding the details contained in this data sheet may be obtained
       from Fujairah Rockwool Factory (Tel: int +971-9-2222297).

       Further information regarding CERTIFIRE certification and other approved products can
       be obtained from CERTIFIRE (Tel: 01925 646777, website: www.warringtonfire.net)




                                                           th
Page 2 of 3 Signed                                Issued: 10 November 2010
                                                             th
                                                  Valid to: 9 November 2015
                 CERTIFICATE No CF 762
             FUJAIRAH ROCKWOOL FACTORY

Fujairah Rockwool Slab Linear Gap Seal - Approval Matrix

Blockwork/Masonry/Concrete (aerated or normal) Vertical Wall Installations 200 mm thick
(min.)
Product Name                               Fujairah Rockwool Slab Linear Gap Seal

         Maximum Gap Width                  Minimum Seal Depth mm               Integrity         Insulation
               mm                                                                 (mins)            (mins)

                   50                                    200                        60                 60

Application Technique         Insert 200 mm (minimum) deep slab of the same width as the required gap (as a
                              minimum) or if wider than the gap, compress to fit.
Classification in accordance with BS 476: Part 4:
                                                          Non-combustible
1970
                             Not evaluated by this                                  Not evaluated by this
Resistance to Smoke:                                      Weather Capability:
                             approval                                               approval
                             Not evaluated by this                                  Not evaluated by this
Acoustic Rating:                                          Movement Capability:
                             approval                                               approval




                                                               th
Page 3 of 3 Signed                                   Issued: 10 November 2010
                                                                th
                                                     Valid to: 9 November 2015

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:205
posted:2/10/2011
language:English
pages:3