Docstoc

FLAT-TO-WALL LCD TV MOUNT

Document Sample
FLAT-TO-WALL LCD TV MOUNT Powered By Docstoc
					FLAT-TO-WALL LCD TV MOUNT
Part No. 28071R

Installation Instructions

WARNING!!!!
Correct assembly is essential
This mount should befitted to a solid wood, briick or concrete wall
Note: We have not supplied wall fixings with this product. All walls differ in strength and
thickness. We advise that you consult professional personell for guidance for purchasing
screws designed specifically for your type of wall.



COMPATIBILITY CHECKER
This TV bracket is designed to fit LCD TV’s and computer monitors with VESA 50, VESA 75, VESA
100, VESA 200x100 and VESA 200 bracket fittings. These standard fittings are found on almost all
systems although some may vary - in which case you may need to contact the TV manufacturer
for assistance.



To check if your TV or monitor is compliant, look at the back of your system and check it has four
equally spaced mounting holes spaced in any of the combinations shown.


               VESA 100                           VESA 50                       VESA 75
                Fittings                          Fittings                      Fittings
                  100MM
                                                                                   75MM




      100MM                   100MM
                                                                       75MM                    75MM




                  100MM                                                            75MM



                VESA 200
                 Fittings                              VESA 200 x 100 Fittings




                                                           turn over for installation instructions...
STEP ONE

WALL FITTING FOR WOOD STRUCTURE (eg STUD WALLING)

Due to the width of wooden beams within dividing walls, there is a limitation for the distance between wall mounting
screws. This LCD wall mount has two close wall mounting holes for this purpose. Fit three suitable wall screws to your
wall (please seek professional advise before obtaining and fitting wall screws - all walls differ!), leaving 2-3mm gap be-
tween the screw head and the wall surface. This allows the plate to slide onto the screws as shown below.
Once the bracket has been fitted you can tighten the wall screws to provide a secure fit.




WALL FITTING FOR CONCRETE/BRICK WALLS

Fit three suitable wall screws to your wall (please seek professional advise before obtaining and fitting wall screws - all
walls differ!), leaving 2-3mm gap between the screw head and the wall surface. This allows the plate to slide onto the
screws as shown below.
Once the bracket has been fitted you can tighten the wall screws to provide a secure fit.




                                          Customer Careline: 0901 293 0038
                  Calls are charged at £1 per minute from a BT landline. Call charges from other networks may vary
                                        Support: http://technical.philex.com
STEP TWO - ASSEMBLING THE MOUNT HEAD

Fit the




                                    Customer Careline: 0901 293 0038
            Calls are charged at £1 per minute from a BT landline. Call charges from other networks may vary
                                  Support: http://technical.philex.com                                         v2

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:14
posted:2/8/2011
language:English
pages:3