Getting Page Printer Page Counters

Document Sample
Getting Page Printer Page Counters Powered By Docstoc
					Getting Page Printer Page Counters

The majority of FUJITSU page printers have a page counter that records
the total number of pages printed since new. The method of accessing this
information varies between printers.

This document details the procedure for the following products

Print Partner 10V,14V,12V,16AV,16ADV,20W
Print Partner 10 & 14
VM4/VM8 , VM800 , VM600 , RX7100 , RX7200,
RX7100PS , RX7200 (Clan version) , RX7300


Print Partner 10V,14V,12V,16AV,16ADV,20W

Power on the printer holding down the + and – buttons on the front panel, while the
printer warms up until the LCD shows the message “Test Print”, now press the
“Enter” button.

Test page printing will now commence, the best way to stop printing is to open the
paper tray to remove the paper source.

You can read the current page count as below

Information printed in test print mode

The printer prints the following information.

•       [VALUE 1]: Total number of printed pages

        Maximum = 16,777,216 (The maximum value returns to zero.)

        Ignore Value 2

•       Sample of first page of test print


'#$%&'()*+,~./0l23456789:;<=>?@ABCDEFGHUKLM
[VALUE 1] [VALUE 2 ];<=>?@ABCDEFOHIJKLMN
$%&'()*+,~./0l23456789:;<=>?@ABCDEFOHIJKLMNO
%&'()*+,~./0l23456789:;<=>?@ABCDEFGHUKLMNOP
&'()*+,~./0l23456789:;<=>?@ABCDEFGHIJKLMNOPQ




FEL Technical Support - 1994-99
Print Partner 10 & 14


The maintenance mode 3 detailed below will provide the page count of the print
engine, take care not to select the wrong maintenance mode

The Print Partner 10 & 14 provides special functions that are started by holding the
ONLINE button pressed when the power is turned on.

(1)     Maintenance modes

Five maintenance modes are provided. The four LED indicators (READY, DATA,
PAPER, and TONER) indicate the mode on the control panel.

Special Maintenance Modes

Mode        Mode Name      READY        DATA    PAPER      TONER      Function
1           Print unit     ON           ON      ON         ON         Clear paper
            change mode                                               counter, etc.
2           Fuser unit     OFF          ON      ON         ON         Clear fuser unit
            change mode                                               counter
3           Test print     OFF          OFF     ON         ON         Start test print
            mode
4           EEPROM         OFF          OFF     OFF        ON         Clear EEPROM
            clear mode
5           Factory mode   OFF          OFF     OFF        OFF        (Factory use only)

Note:

When executing the EEPROM clear mode, Print Partner 10 & 14 determines the
default paper size depending on the paper tray installed.

(2)     How to execute the maintenance mode

1.      Press and hold the ONLINE button while turning the printer on.

        Note: Be sure to keep holding the ONLINE button until step 6

2.      All indicators turn on.

3.      All indicators except POWER turn off.

4.      The READY indicator turns on.

5.      All indicators turn on again.

        Changing from step 4 status to step 5 status indicates that the printer enters
        maintenance Mode 1.

6.      Release the ONLINE button.




FEL Technical Support - 1994-99
          The printer is now in maintenance mode 1, print unit change mode, but does
          not execute it yet.

7.        If you want to execute maintenance mode 1, press the READY
          button for more than five seconds. If you want to execute other steps, go to
step 8.


8.        Press the READY button for less than one second to change the
          maintenance mode to the next.

9.      Repeat step 8 until the desired maintenance mode is indicated,
        then press the ONLINE button for more than five seconds to execute the
selected mode.

Notes:

1.        To stop or quit the maintenance mode, turn power off.

2.        The maintenance mode changes step by step. However, it does not
          change from maintenance mode 1, factory mode, to any other mode. Be sure to
          turn power off if the printer enters the factory mode.

3.        Never execute the factory mode. It initialises the printer. The
          User’s set data will be lost.

(3)       Information printed in test print mode

The printer prints the following information.

•         [VALUE 1]: Total number of printed pages

          Maximum = 16,777,216 (The maximum value returns to zero.)

          Ignore Value 2

•         Sample of first page of test print


'#$%&'()*+,~./0l23456789:;<=>?@ABCDEFGHUKLM
[VALUE 1] [VALUE 2 ];<=>?@ABCDEFOHIJKLMN
$%&'()*+,~./0l23456789:;<=>?@ABCDEFOHIJKLMNO
%&'()*+,~./0l23456789:;<=>?@ABCDEFGHUKLMNOP
&'()*+,~./0l23456789:;<=>?@ABCDEFGHIJKLMNOPQ




FEL Technical Support - 1994-99
VM4/VM8


The maintenance mode 3 detailed below will provide the page count of the print
engine, take care not to select the wrong maintenance mode

The VM4/VM8 or PrintPartner 4000/8000 provides special functions that are started
by holding the ONLINE button pressed when the power is turned on.

(1)     Maintenance modes

Five maintenance modes are provided. The four LED indicators (ONLINE, DATA,
PAPER, and TONER) indicate the mode on the control panel.

Special Maintenance Modes

Mode        Mode Name      ONLINE       DATA    PAPER      TONER      Function
1           Print unit     ON           ON      ON         ON         Clear paper
            change mode                                               counter, etc.
2           Fuser unit     OFF          ON      ON         ON         Clear fuser unit
            change mode                                               counter
3           Test print     OFF          OFF     ON         ON         Start test print
            mode
4           EEPROM         OFF          OFF     OFF        ON         Clear EEPROM
            clear mode
5           Factory mode   OFF          OFF     OFF        OFF        (Factory use only)

Note:

When executing the EEPROM clear mode, the VM4/VM8 or PrintPartner 4000/8000
determines the default paper size depending on the paper tray installed.

(2)     How to execute the maintenance mode

1.      Press and hold the ONLINE button while turning the printer on.

        Note: Be sure to keep holding the ONLINE button until step 6 is completed.

2.      All indicators turn on.

3.      All indicators except POWER turn off.

4.      The ONLINE indicator turns on.

5.      All indicators turn on again.

        Changing from step 4 status to step 5 status indicates that the printer enters
        maintenance
        mode 1.

6.      Release the ONLINE button.




FEL Technical Support - 1994-99
          The printer is now in maintenance mode 1, print unit change mode, but does
          not execute it yet.

7.        If you want to execute maintenance mode 1, press the ONLINE
          button for more than five seconds. If you want to execute other steps, go to
step 8.


8.        Press the ONLINE button for less than one second to change the
          maintenance mode to the next.

9.      Repeat step 8 until the desired maintenance mode is indicated.
        Then press the ONLINE button for more than five seconds to execute the
selected mode.

Notes:

1.        To stop or quit the maintenance mode, turn power off.

2.        The maintenance mode changes step by step. However, it does not
          change from maintenance mode 1, factory mode, to any other mode. Be sure to
          turn power off if the printer enters the factory mode.

3.        Never execute the factory mode. It initialises the printer. The
          user's set data will be lost.

(3)       Information printed in test print mode

The printer prints the following information.

•         [VALUE 1]: Total number of printed pages

          Maximum = 16,777,216 (The maximum value returns to zero.)

          Ignore Value 2

•         Sample of first page of test print


'#$%&'()*+,~./0l23456789:;<=>?@ABCDEFGHUKLM
[VALUE 1] [VALUE 2 ];<=>?@ABCDEFOHIJKLMN
$%&'()*+,~./0l23456789:;<=>?@ABCDEFOHIJKLMNO
%&'()*+,~./0l23456789:;<=>?@ABCDEFGHUKLMNOP
&'()*+,~./0l23456789:;<=>?@ABCDEFGHIJKLMNOPQ




FEL Technical Support - 1994-99
RX7100 RX7200, RX7100PS

1) Select H.P. LaserJet emulation ( only req. on RX7100PS )
2) Power on printer holding down ‘ON LINE’ & ‘BIN SELECT’ buttons
3) When display changes from ‘Initialising’ to ‘Warm Up’ release buttons to display
   page count

RX7100 & RX7200 (Clan version)

1) Press ê Key 4 times
2) Printer will print a Set-up Report which gives the Total Page Count

RX7300

1) Refer to mechanical counter on right hand side of printer under small hinged panel

VM600

1) Press ‘ON-LINE’ to take printer Off Line
2) Hold down ‘MENU’ until display reads ‘CONFIG MENU’
3) Press MENU button repeatedly until display reads ‘TOTAL = xxxxx’


VM800

1)   Press ‘On-Line’ to take printer off line
2)   Press ‘On-Line’ & ‘Menu 1’ together - display reads ‘Interface’
3)   Press ‘Menu 1’ (Next) until the display reads ‘Others’
4)   Press ‘Paper Select’ (Enter) display reads ‘Op Lang’
5)   Press ‘Menu 1’ (Next) twice
6)   Press ‘Paper Select’ (Enter) to display Total Page Count




FEL Technical Support - 1994-99

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:9
posted:2/5/2011
language:English
pages:6