Docstoc

Complimentary Reference Material

Document Sample
Complimentary Reference Material Powered By Docstoc
					                                                     Complimentary Reference Material

                                      This PDF has been made available as a complimentary service for you to assist in
                                      evaluating this model for your testing requirements.

                                      TMG offers a wide range of test equipment solutions, from renting short to long
                                      term, buying refurbished and purchasing new. Financing options, such as
                                      Financial Rental, and Leasing are also available on application.

                                      TMG will assist if you are unsure whether this model will suit your requirements.

                                      Call TMG if you need to organise repair and/or calibrate your unit.

                                      If you click on the “Click-to-Call” logo below, you can all us for FREE!


         TMG Corporate Website                        TMG Products Website




  Disclaimer:
  All trademarks appearing within this PDF are trademarks of their respective owners.


Form 080/01
EFT Verification Set
EFT/Burst generators are verified according to the                                                                                          EFT/Burst Verification Set-up
standard IEC/EN 61000-4-4 Edition 2. Measurements of
individual impulse parameters are performed using a                                                                                         To verify an EFT/Burst generator proceed as
termination to match the EFT/Burst generator output                                                                                         below:
impedance (50Ω) and a voltage divider to reduce the
impulse level so it can be displayed on commercial                                                                                          (1)   connect the attenuator input directly to the
oscilloscopes. The 50Ω attenuator, PAT 50 is to match                                                                                             EFT/Burst generator High Voltage output
the new amendment 2 and edition 2 requirements.
                                                                                                                                            (2)   using 1m cable provided, connect output
An oscilloscope with minimum 400MHz band-width is                                                                                                 of the attenuator to a suitable oscilloscope
required to properly display the EFT impulse.
                                                                                                                                            (3)   set the oscilloscope input to 50Ω.
                                                                                The PAT attenuator
                                                                                series has been
                                                                                developed in response                                       If the EFT/Burst impulse is to be verified at the
                                                                                to the IEC 61000-4-4                                        output of a CDN, a suitable adaptor is required.
                                                                                amendment 2 from                                            Both the generator and the oscilloscope must be
                                                                                2001 which extends                                          connected to the ground plane properly.
                                                                                the verification
                                                                                requirement to also
                                                                                include impulse
                                                                                measurement using a
                                                                                1kΩ load.                                                   Set consisting of

                                                                                The PAT 1000 meets                                                 PAT 50 50Ω load / attenuator 54dB
                                                                                the amendment 2 and                                                PAT 1000 1kΩ load / attenuator 60dB
                                                                                edition 2 requirements
                                                                                of 1000Ω in parallel                                               Coaxial cable 1 meter
                                                                                with 6pF.                                                          User manual & Test certificate
                                                                                                                                                   Functional case




     Technical Specifications

   Divider Ratio PAT 50                                     54dB                                                                        BNC Cable length              1m
   Divider Ratio PAT 1000                                   60dB                                                                        Max. Impulse voltage          5kV
   Test Load Impedance                                      50         ± 2%                                                             Input connection              SHV
   Test Load Impedance                                      1000            ± 2% // ≤ 6pF                                               Output connections            50Ω BNC connector
   Net weight                                               1.0 kg                                                                      Dimensions (W x H x D)        260 x 160 x 62mm



       Ordering Information
EFT VERIFICATION SET Art. No. 249995



Headquarters                                                                                      Locate your local                                                      North American Office
Haefely Test AG                                                                                sales representative at                                                        Hipotronics Inc.
Lehenmattstrasse 353                                                                           www.haefelyEMC.com                                                       Haefely EMC Division
CH-4052, Basel                                                                                                                                                                  1650 Route 22
Switzerland                                                                                                                                                               Brewster, NY 10509

      + 41 61 373 41 11                                                                                                                                               ++1 845 279 3644 x264
      + 41 61 373 45 99                                                                                                                                                    ++1 845 279 2467
     EMC-sales@haefely.com                                                                                                                                     EMCsales@hubbell-haefely.com

Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice.                                   EFT VERIFICATION SET_2006-08-02.doc

				
DOCUMENT INFO