2 3 2011 LEEDS Credits Potential Polyguard Products by elx18731

VIEWS: 12 PAGES: 3

Film Release Management document sample

More Info
									          2/3/2011                                                         LEEDS Credits Potential - Polyguard Products                                                                                      page1



x.xuslu.LEED credits products

   How Polyguard's Products Might Contribute to
          a LEED Rating on your Project
                                                                          Possible LEED Credits on
                                                                                Your Project                            Explanation
SUSTAINABLE SITES
   P1     EROSION & SEDIMENTATION CONTROL
     1    SITE SELECTION
     2    URBAN REDEVELOPMENT
                                                                              UNDERSEAL XT Barrier
    3     BROWNFIELD REDEVELOPMENT                                                Membrane                       Underseal XT is a tested barrier to methane, pesticides, and other contaminants
    4.1   ALTERNATIVE TRANSPORTATION - Public Access
    4.2   ALTERNATIVE TRANSPORTATION - Bicycle Storage/Changing Rooms
    4.3   ALTERNATIVE TRANSPORTATION - Alternative Refuel Stations
    4.4   ALTERNATIVE TRANSPORTATION - Parking Capacity
    5.1   REDUCED SITE DISTURBANCE - Protect or restore open space
    5.2   REDUCED SITE DISTURBANCE - Development Footprint
                                                                              LOWFLOW Drainage and               As part of a designed system to control stormwater runoff, LowFlow offers a low cost,
                                                                                                                 100% postindustrial recycled design option. Additionally, LowFlow design will slightly
                                                                                 Protection Mat
                                                                                                                 retain stormwater, since it drains at a rate 7% as quickly as stormwater. This retention will
   6.1    STORMWATER MANAGEMENT - Rate or Quantity                                                               aid onsite infiltration.
    6.2   STORMWATER MANAGEMENT - Treatment
                                                                          Alumaguard 60 for Jacketing of         The highly reflective nature of Alumaguard and Polyguard Peel 'n Stick Roofing
   7.1    DESIGN TO REDUCE HEAT ISLANDS - Nonroof                              Insulated Ductwork                membrane will reflect close to 100%, minimizing heat gain

                                                                              Peel 'n Stick for roofs,           The highly reflective nature of Alumaguard and Polyguard Peel 'n Stick Roofing
                                                                                                                 membrane will reflect close to 100%, minimizing heat gain
                                                                          Alumaguard 60 for Jacketing of
   7.2    DESIGN TO REDUCE HEAT ISLANDS - Roof                                 Insulated Ductwork
     8    LIGHT POLLUTION REDUCTION


WATER EFFICIENCY
    1.1   WATER EFFICIENT LANDSCAPING - Reduce by 50%
    1.2   WATER EFFICIENT LANDSCAPING - No Potable Use or No Irrigation
     2    INNOVATIVE WASTEWATER TECHNOLOGIES
    3.1   WATER USE REDUCTION - 20%
    3.2   WATER USE REDUCTION - 30%


ENERGY AND ATMOSPHERE
   P1     FUNDAMENTAL BLDG SYSTEMS COMMISSIONING
   P2     MINIMUM ENERGY PERFORMANCE
   P3     CFC REDUCTION IN HVAC&R EQUIPMENT
   1.1    OPTIMIZE ENERGY PERFORMANCE - 20% New / 10% Existing                   300, 400 air barriers           Polyguard 300 and 400 Air Barriers have been used on numerous architurally designed
                                                                                                                       projects across the year as part of an integrated building envelope design.
   1.2    OPTIMIZE ENERGY PERFORMANCE - 30% New / 20% Existing                            **
                                                                                                                 Polyguard Peel 'n Stick has been used on several high end residences in the Austin, TX
                                                                          Peel 'n Stick reflective air barrier     area as a reflective envelope component, resulting in dramatic air conditioning cost
   1.3    OPTIMIZE ENERGY PERFORMANCE - 40% New / 30% Existing                                                           reductions. (reflective design may not be suitable in other climate areas)
                                                                                                                  Alumaguard acts as a waterproofing for insulated ductwork, keeping the insulation dry
   1.4    OPTIMIZE ENERGY PERFORMANCE - 50% New / 40% Existing                             **
                                                                                                                                               and thus reducing energy use.
                                                                                                              Polyguard 300 and 400 Air Barriers have been used on numerous architurally designed
                                                                                                                    projects across the year as part of an integrated building envelope design.
        2/3/2011                                                          LEEDS Credits Potential -           Polyguard Peel
                                                                                                      Polyguard Products 'n Stick has been used on several high end residences in the Austin, TX     page2
                                                                                                                area as a reflective envelope component, resulting in dramatic air conditioning cost
                                                                                                                      reductions. (reflective design may not be suitable in other climate areas)
                                                                                                               Alumaguard acts as a waterproofing for insulated ductwork, keeping the insulation dry
                                                                                                                                            and thus reducing energy use.
 1.5    OPTIMIZE ENERGY PERFORMANCE - 60% New / 50% Existing                ALUMAGUARD Duct Wrap
  2.1   RENEWABLE ENERGY - 5%
  2.2   RENEWABLE ENERGY - 10%
  2.3   RENEWABLE ENERGY - 20%
  3     ADDITIONAL COMMISSIONING
  4     OZONE DEPLETION
  5     MEASUREMENT AND VERIFICATION
  6     GREEN POWER


MATERIALS AND RESOURCE
  P1    STORAGE / COLLECTION OF RECYCLABLES
  1.1   BUILDING REUSE - Maintain 75% of Existing Shell
  1.2   BUILDING REUSE - Maintain 100% of Shell
  1.3   BUILDING REUSE - Maintain 100% Shell and 50% Non-Shell
                                                                              UNDERSEAL XT barrier
 2.1    CONSTRUCTION WASTE MANAGEMENT - Divert 50%                                membranes                    Underseal XT barrier membranes are packaged in bulk, and use no boxes

                                                                                                               Most other Polyguard membranes utilize a disposable film release liner, not the more
                                                                               Most other Polyguard            conventional paper/poly composite release liner. The film release also reduces
 2.2    CONSTRUCTION WASTE MANAGEMENT - Divert 75%                                 Membranes                   construction waste.
  3.1   RESOURCE REUSE - Specify 5%
  3.2   RESOURCE REUSE - Specify 10%
 4.1    RECYCLED CONTENT - Specify 25%                                   LowFlow is 100% post industrial Link to table showing recycled content of each Polyguard product
 4.2    RECYCLED CONTENT - Specify 50%
                                                                                    recycled.
 5.1    LOCAL/REGIONAL MATERIALS - 20% Manufactured Locally                 Ennis TX radius 500 miles          Link to map showing 500 mile radius of Ennis, TX

                                                                         75% harvested within 500 miles For almost all Polyguard products, over 75% of raw materials (by weight) come from
 5.2    LOCAL/REGIONAL MATERIALS - of 20% Above, 50% Harvested Locally            of Ennis TX           sources within 500 miles of our Ennis, TX plant.
  6     RAPIDLY RENEWABLE MATERIALS
  7     CERTIFIED WOOD


INDOOR AIR QUALITY
  P1    MINIMUM IAQ PERFORMANCE
  P2    ENVIRONMENTAL TOBACCO SMOKE (ETS) CONTROL
  1     CARBON DIOXIDE MONITORING
  2     INCREASE VENTILATION EFFECTIVENESS                                        ALUMAGUARD                   Alumaguard acts as a secondary seal, reducing duct leakage.
  3.1   CONSTRUCTION IAQ MANAGEMENT PLAN - During Construction
  3.2   CONSTRUCTION IAQ MANAGEMENT PLAN - Before Occupancy
                                                                            All Polyguard Membranes            All Polyguard membranes, as well as Polyguard's water base adhesives and primers, are
 4.1    LOW EMITTING MATERIALS - Adhesives and Sealants                                                        low emitting.
  4.2   LOW EMITTING MATERIALS - Paints
  4.3   LOW EMITTING MATERIALS - Carpet
  4.4   LOW EMITTING MATERIALS - Composite Wood
                                                                             UNDERSEAL XT plus all             Underseal XT is a tested barrier to many contaminants, including pesticides, radon gas,
                                                                              Polyguard Membranes              and methane. If you are concerned about a different contaminant, we may be able to test
                                                                                                               it for you. In addition all Polyguard Membranes block moisture and water, which if
  5     INDOOR CHEMICAL & POLLUTANT SOURCE CONTROL                                                             allowed indoors could create toxic mold.
  6.1   CONTROLLABILITY OF SYSTEMS - Perimeter
  6.2   CONTROLLABILITY OF SYSTEMS - Non-Perimeter
         2/3/2011                                                              LEEDS Credits Potential - Polyguard Products                                                                              page3



   7.1   THERMAL COMFORT - Comply with ASHRAE 55-1992
   7.2   THERMAL COMFORT - Permanent Monitoring System
   8.1   DAYLIGHT AND VIEWS - Daylight 75% of Spaces
   8.2   DAYLIGHT AND VIEWS - Daylight 90% of Spaces


INNOVATION AND DESIGN PROCESS                                                        POSSIBILITIES
  1.1 INNOVATION IN DESIGN - UNDERSEAL XT to reduce pesticide usage                   UNDERSEAL XT              These are examples of where Polyguard products might qualify as innovations in design.
  1.2 INNOVATION IN DESIGN - ALUMAGUARD to save energy, improve ventilation,          ALUMAGUARD
  1.3 INNOVATION IN DESIGN - Peel 'n Stick on roof to reflect heat                      Peel 'n Stick
  1.4 INNOVATION IN DESIGN - LowFlow; first usage in the area                            LowFlow
    2    LEED ACCREDITED PROFESSIONAL

								
To top