List 9b Approved Manufacturers of Fittings for Chain Cable

Document Sample
List 9b Approved Manufacturers of Fittings for Chain Cable Powered By Docstoc
					                                            List 9b
                              Approved Manufacturers of
                                 Fittings for Chain Cable


This section lists works approved by Lloyd’s Register Group for the manufacture of fittings
for chain cable in accordance with the requirements of LR's Rules and Regulations for the
Classification of Ships Part 2, Chapter 10.

Approval is based on the nominal diameter of the chain cable for which the fittings are
intended.

The information listed for each works is a summary of the product, grade and maximum
nominal diameter approved.

Where required further information should be obtained from the current certificate of
approval issued to the manufacturer by LR.

Approval only covers the manufacturing location listed, it does not extend to other works
owned by the same company.

The local LR surveying office is also listed.

NOTICE AND TERMS OF USE
Lloyd's Register, its affiliates and subsidiaries and their respective officers, employees or
agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register
Group'. The Lloyd's Register Group assumes no responsibility and shall not be liable to any
person for any loss, damage or expense caused by reliance on the information or advice in
this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register Group entity for the provision of this information or advice and
in that case any responsibility or liability is exclusively on the terms and conditions set out
in that contract.




                                                                                    As at 02 November 2010
                                                                             List 9b
                                                                  Approved Manufacturers of
                                                                   Fittings for Chain Cable
                                                                                                                               Max Nominal Diameter
Name and Address                                                      Category                        Grades                                  (mm)                       Office


Brazil
FUNDIÇÃO TÉCNICA SUL AMERICANA LTDA                                   Cast Fittings                   U1, U2, U3                                 100.00           Rio de Janeiro
    Av. das Orquídeas, S/N - Quadra 139
    Parque Primavera - (Chaperó)
    C.E.P. 23.830-290 - Itaguaí
    Rio de Janeiro
    Tel: +55 21 2688 2639 Fax: +55 21 2688 2639
    Email:mailto: fundsulamenricana@uol.com.br
    Web: www.fund-ftsa.com.br
    Certificate #: MD00/3461/0002/9b Inspection Due: 24/11/2012



China, People's Republic of
JIANGSU ASIAN STAR ANCHOR CHAIN Co., Ltd                              Forged Fittings                 U1, U2, U3                                 122.00                 Nanjing
                                                                                                      R4                                         132.00
                                                                                                      R3, R3S                                    157.00
    Dongxing Town, 214533
    Jingjiang
    Jiangsu Province
    Tel: +86 523 4686 808 Fax: +86 523 4681 390 Email: mailto:taojj@pub.tz.jsinfo.net Web: http://www.anchor-chain.com
    Certificate #: MD00/1974/0006/9b Inspection Due: *ENHANCED SURVEY*

JINGJIANG ZHENGMAO ANCHOR CHAIN FITTINGS CO., LTD.                    Forged Fittings                 U1, U2, U3                                 122.00                 Nanjing
     Majiao Town,
     Jinjiang City,
     Jiangsu Province,
    Tel: +86 0523 8439 2158 Fax: +86 0523 8439 5088 Email mailto:maxue1982@msn.com
    The scope of approval is for the following fittings in the above Grades to the diameters below suitable for the maximum chain cable diameter shown above.
    Kenter Shackles to 122mm diameter, End Shackles to 171mm diameter, D Type Joining Shackles to 159mm diameter, and Swivels to 146mm diameter.
    The scope of approval covers for the manufacture of the items with out material and product testing, all required testing is to be carried out by the chain
    manufacturer purchasing the fittings.
    The scope of approval also covers for the supply of fittings in the un-heat treated condition, to the maximum diameters above, heat treatment and required
    testing to be carried out by the chain manufacturer purchasing the fittings.
    Certificate Number: MD00/3826/0001/9b Inspection Due: 07/12/2010

LAIWU STEEL ZIBO ANCHOR CHAIN CO., LTD.                               Forged Fittings                 U1, U2, U3                                 122.00                Qingdao
    Heiwang Town
    Zichuan District
    Zibo City
    Shandong Province
    Tel +86 (0) 533 506 0247 Fax: +86 (0) 533 506 0542 Email mailto:zuogang@lgchains.com Web http://www.lgchains.com
    Certificate #: MD00/2135/0003/9b Expiry: 23/08/2012

QINGDAO ANCHOR CHAIN CO., LTD.                                        Forged Fittings                 U1, U2, U3                                 122.00                Qingdao
    106 Aolan Road
    266200 Jimo
    Qingdao
    Tel: +86 (0)532 88513117 Fax: +86 (0)532 88511501 email mailto:qac@public.qd.sd.cn Web http://www.qd-anchor-chain.com
    Certificate #: MD00/1226/0006/9b Inspection Due: 01/11/2012

ZHEJIANG SHUANGNIAO ANCHOR CHAIN CO., LTD.                            Forged Fittings                 U2, U3                                      76.00           Shanghai Port
     Sanwang Industrial Park,
     Huangze Town, Shengzhou City,
     Zhejiang Province
    Tel: +86 (0) 575 8350 7866 Fax: +86 (0) 575 8350 7766 Email: zjsnac@163.com Web: http://zjsnac.com
    The scope of approval is for the following fittings in the above Grades to the diameters below suitable for the maximum chain cable diameter shown above.
    Kenter Shackles to 76mm diameter, End Shackles to 106mm diameter, and Swivels to 91mm diameter.
    Grade U2 supplied in normalized condition, Grade U3 supplied in the quenched and tempered condition.
    Certificate Number: MD/00/357/0001/9b Expiry: 14/10/2013

ZHENGMAO GROUP CHANGSHU ANCHOR CHAIN ACCESSORY                        Forged Fittings                 U1, U2, U3                                 107.00                 Nanjing
    Xingang Town,
    Changshu City,
    Jiangsu Province, 215513,
    Tel: +86 0512 5269 1715 / 1315 Fax: +86 0512 5269 1868 Email: mailto:zmcsml@163.com Web: http://www.zmcsml.com
    The scope of approval is for the following fittings in the above Grades to the diameters below suitable for the maximum chain cable diameter shown above.
    Kenter Shackles to 107mm diameter, End Shackles to 150mm diameter, and Swivels to 128mm diameter.
    The scope of approval covers for the manufacture of the items with out material and product testing, all required testing is to be carried out by the chain
    manufacturer purchasing the fittings.
    The scope of approval also covers for the supply of fittings in the un-heat treated condition, to the maximum diameters above, heat treatment and required
    testing to be carried out by the chain manufacturer purchasing the fittings.
    Certificate Number: MD00/3827/00013/9b Expiry: 06/12/2010




                                                                                      Page    2                                                     As at 02 November 2010
                                                                            List 9b
                                                                 Approved Manufacturers of
                                                                  Fittings for Chain Cable
                                                                                                                                Max Nominal Diameter
Name and Address                                                     Category                         Grades                                   (mm)                Office


France
LE BEON MANUFACTURING                                                Forged Fittings                  U1, U2, U3, R3, R3S, R4                  160.00              Nantes
     Lorient Cedex
     7 Bd Louis Nail
     56323 LORIENT
    Tel: +33 297 37 22 00 Fax: +33 297 37 12 15 Email: mailto:info@le-beon.com Web: http://www.le-beon.com
    Certificate #: MD00/0529/0005/9b Inspection Due: 27/02/2013

MARIT & DAVAINE CHAÎNES                                              Forged Fittings                  U1, U2, U3, R3, R3S, R4                   81.00                Lyon
    230 avenue Desandrouins
    F-59300 Valenciennes
    Tel +33 3 2719 3270 Fax +33 3 2719 3271 Email: mailto:marit@wanadoo.fr
    Certificate #: MD00/0994/0005/9b Inspection Due: 30/08/2011



Germany
ANKER-SCHROEDER.DE ASDO GmbH.                                        Forged Fittings                  U1, U2, U3, R4                           160.00           Dortmund
   Postfach 11 01 96
   D-44057 Dortmund
    Tel: +49 231 5170116 Fax: +49 231 5170157 Email: mailto:info@anker.de Web: http://www.anker.de
    Certificate No. MD00/0107/0005/9b Expiry: 19/11/2010

HÖNNETALER KETTENFABRIK SCHULTE & Co.                                Welded Fittings                  U1, U2, U3                                26.00           Dortmund
   Bundesstraße 30
   D-59846 Sundern-Hövel
    Tel: +49 (0)2935 809-0 Fax: +49 (0)2935 4521 Email: mailto:info@hoennetal-ketten.de     Web: http://www.hoennetal-ketten.de
    Certificate No. MD00/2583/0004/9b Expiry: 13/09/2011

KETTENFABRIK MESTER GmbH.                                            Welded Fittings                  U1, U2, U3                               105.00           Dortmund
    Bornstraße 280
    D-44145 Dortmund
    Tel +49 231 8610300 Fax +49 231 86103023 Email: mailto:info@mesterkette.com        Web: http://www.mesterkette.com
    Certificate No. MD00/0841/0006/9b Expiry: 05/04/2011

SCHMIEDESTÜCK-VERTRIEB FEUERSTEIN GMBH                               Cast Fittings                    U2, U3                                   153.00           Dortmund
                                                                     Forged Fittings                  R3, R3S, R4                               84.00
                                                                                                      U1, U2, U3                               153.00
    Beuler Höhe 16
    D-44525 Hattingen
    Tel: +49 (0)2324 9507-50 Fax: +49 (0)2324 9507-53
    email mailto:andreas@feubo.de
    Web: www.feubo.de
    Certificate No. MD00/2015/0005/9b Expiry: 28/01/2013

SCHÜTTE, MEYER + CO. GUSSTECHNIK GMBH                                Cast Fittings                    U1, U2, U3                               125.00           Dortmund
    Bergstraße 16-20
    D-58642 Iserlohn
    Tel +49 (0)2374 9297-0 Fax +49 (0)2374 9297-98
    Email: mailto:info@schuettemeyerguss.de Web http://www.schuettemeyerguss.de
    Certifciate #: MD00/1372/0005/9b Inspection Due: 18/04/2011

STAHLHAMMER BOMMERN GMBH                                             Forged Fittings                  U1, U2, U3                               130.00           Dortmund
                                                                                                      R4                                       160.00
    Carl-Zeiss Straße 7
    D-59077 Hamm
    Tel: +49 (0)2381 91498-43 Fax: +49 (0)2381 91498-21 EMail mailto:TLenk@stahlhammer.de Web page www.stahlhammer.de
    Certificate #: MD00/1422/0006/9b Inspection Due: 21/01/2013

Thiele GmbH & Co. KG                                                 Forged Fittings                  R3, R3S, R4                               76.00           Dortmund
                                                                                                      U3                                       132.00
                                                                                                      U1, U2                                   140.00
    Werkstr. 3
    D-58640 Iserlohn
    Tel: +49 (0)2371 947-0 Fax: +49 (0)2371 947-234 Email: mailto:info@thiele.de     Web: http://www.thiele.de
    Certificate #: MD00/1513/0005/9b Inspection Due: 05/07/2009



India
INDIAN CHAIN PRIVATE LTD.                                            Welded Fittings                  U3                                        66.00             Calcutta
                                                                                                      U1, U2                                    70.00
    237-B, A.J.C. Bose Road
    KOLKATA 700 020
    Tel: +91 33 2247 6839 Fax: +91 33 2247 4217 Email: mailto:inchain@vsnl.com
    Certificate No. MD00/0757/0005/9b Expiry: 03/01/2011




                                                                                     Page      3                                                  As at 02 November 2010
                                                                            List 9b
                                                                 Approved Manufacturers of
                                                                  Fittings for Chain Cable
                                                                                                                               Max Nominal Diameter
Name and Address                                                     Category                        Grades                                   (mm)                Office


Japan
BANSHU CHAIN CO., LTD.                                               Welded Fittings                 U1, U2                                    66.00               Kobe
    402, Shirahamacho-Koo
    Himeji
    Hyogo
     Tel +81 (0)792 46 3155 Fax +81 (0)792 46 1053
     email banshuseisa@yahoo.co.jp
     web banshu-chain.sakura.ne.jp
     Certificate No. MD00/0161/0006/9b Expiry: 21/11/2012

HAMANAKA CHAIN MFG. CO., LTD.                                        Welded Fittings                 R3, R3S, R4                              134.00               Kobe
                                                                                                     U1, U2, U3                               155.00
     Himeji Factory
     810-1, Oeshima
     Aboshi-ku
     Himeji-city
     Hyogo-pref.
     Tel +81 792 73 7111 Fax +81 792 73 0313
     Certificate No. MD00/0642/0007/9b Expiry: 19/05/2013

KUREHA SEIKO CO., LTD                                                Cast Fittings                   R3                                       132.00               Kobe
                                                                                                     U1, U2, U3                               152.00
     4-41, 5-Chome
     Takeshima-cho
     Nishiyodogawa-ku
     Osaka
     Tel +81 6 6471 4331 Fax +81 6 6475 0023
     Certificate No. MD00/0906/0004/9b Expiry: 02/11/2010

NIPPON CHAIN & ANCHOR Co., Ltd.                                      Cast Fittings                   U1, U2, U3                               152.00               Kobe
                                                                     Welded Fittings                 R4                                        84.00
                                                                                                     U1, U2, U3, R3                           152.00
                                                                     Forged Fittings                 U1, U2, U3                               152.00
     Hiro Factory
     1-2-43 Hiro-Shiratake
     Kure City
     Hiroshima Pref.
     P.C. 737-0144
     Tel. +81 (0)823 71 1170 Fax +81 (0)823 71 1174 Email: mailto:e.nishikawa@kotobukikogyo.co.jp
     Certificate No. MD00/1082/0006/9b Expiry: 25/11/2011

SUMITOMO HEAVY INDUSTRIES HIMATEX CO LTD.,                           Forged Fittings                 U1, U2, U3                                90.00               Kobe
    ISOURA WORK
    16-4 Isoura-cho
    Niihama-shi
    Ehime-pref
    792-0002
     Tel: +81 897 32 6504 Fax: +81 897 32 6496 email: mailto:ykm_kuwano@shuff.shi.co.jp     website: http://www.shinsissa.co.jp
     Certificate No. MD00/0793/0005/9b Expiry: 23/04/2013

TOA CHAIN MANUFACTURING CO., LTD.                                    Welded Fittings                 U1, U2, U3                                70.00               Kobe
    Otsu-362
    Shirahama-cho
    Himeji-city
    Hyogo-pref.
     Tel: +81 (0)792 46 0555 Fax: +81 (0)792 46 3040
     Certificate No. MD00/1532/0005/9b Expiry: 03/06/2011



Korea
DAI HAN ANCHOR CHAIN MFG.CO., LTD.                                   Welded Fittings                 U1, U2, U3, R3                           147.00               Seoul
                                                                                                     R4                                       152.00
                                                                                                     R3S                                      162.00
                                                                     Forged Fittings                 U1, U2, U3, R3, R3S, R4                  132.00
     #740, Dowha-Dong
     Nam-Gu
     Inchon
     Tel: +32 32 862 0091 Fax: +32 863 5114 Email: mailto:daihan@dhac.co.kr     Web: http://www.dhac.co.kr
     Certificate No. MD00/0371/0008/9b Expiry: 31/01/2013

Daihan Steel Co., Ltd.                                               Cast Fittings                   R4                                       152.00               Seoul
                                                                                                     U1, U2, U3, R3, R3S                      162.00
     #476-1, Gajwa-Dong
     Tel: +82 32 862 0091 Fax: +82 32 863 5114
     Certificate No. MD00/0377/0007/9b Expiry: 07/01/2011




                                                                                     Page    4                                                   As at 02 November 2010
                                                                            List 9b
                                                                 Approved Manufacturers of
                                                                  Fittings for Chain Cable
                                                                                                                               Max Nominal Diameter
Name and Address                                                     Category                        Grades                                   (mm)                 Office

PU SUNG METAL CO., LTD.                                              Forged Fittings                 U1, U2, U3, R3, R3S, R4                  132.00                Seoul
    2Da 704
    1257-3 Jeongwang-Dong
    Shiheung-Si
    Kyunggi-Do 429-849
     Tel +82 31-497 1357 Fax +82 31 497-4939
     Certificate No. MD00/3226/0002/9b Expiry: 03/04/2012



Spain
FORGING PRECISION SISTEMS S.L.L                                      Forged Fittings                 U1, U2, U3                               123.00         San Sebastian
                                                                                                     R4                                       132.00
     Ctra. Navarra s/n
     Apartado 22
     20210 Lazkao
     Guipuzcoa
     Tel: +34 943 805 333 Fax: +34 943 889 137 Email: mailto:m_sanchez@la.sfp.es      Web: http://www.stp.es
     Certificate No: MD/0545/0004/9b Expiry: 18/02/2011

GUIVISA, S.L.                                                        Cast Fittings                   U1, U2, U3                               123.00                Bilbao
    Avda. Cervantes, 47
    48970 BASAURI
    APARTADO 2
    Vizcaya
     Tel +34 94 4261144 Fax +34 94 4493539
     Email: mailto:calidad.gv@guivisa.com.
     Certificate No. MD00/0623/0004/9b Expiry: 19/09/2010

SIDENOR INDUSTRIAL S.L.                                              Forged Fittings                 U1, U2, U3                               123.00                Bilbao
                                                                                                     R4                                       132.00
     Paseo Alejandro Calonje, 1
     39200 Reinosa (Cantabria)
     Tel: +34 942775000 Fax: +34 942775283 Email: mailto:concepcion_carcedo@sidenor.com
     Certificate No. MD00/0546/0005/9b Expiry: 20/06/2011

VICINAY CADENAS S.A.                                                 Forged Fittings                 U1, U2, U3, R3, R3S                      132.00                Bilbao
                                                                                                     R4, R5*                                  180.00
     Deusto Factory
     C/Particular de Sagarduy, 5
     P.O. Box 956
     48080 BILBAO (VIZCAYA)
     Tel: +34 944891131 Fax: +34 944891132 Email: mailto:jvicinay@vicinaycadenas.com     Web: http://www.vicinaycadenas.com
     Certificate No. MD00/1633/0006/9b Expiry: 02/07/2012



Sweden
KOHLSWA GJUTERI AB.                                                  Cast Fittings                   U1, U2, U3, R3, R3S, R4                  160.00            Stockholm
   Box 101
   S-730 30 Kolsva
     Tel: +46 221 83000 Fax: +46 221 83019 Email: mailto:ellinor.ohlsson@kohlswagjuteri.se Web: http://www.kohlswagjuteri.se
     Certificate No. MD00/1130/0004/9b Expiry: 12/01/2011



Turkey
EVREN ZINCIR IMALAT SANAYII TICARET A.S.                             Welded Fittings                 U1, U2, U3                                78.00              Istanbul
    Sira Sogutler Mah
    Istanbul CAD No:51/1 PK.22
    Cayirova-Gebze
    Kocaeli
     Tel 90 262 653 61 74 Fax 90 262 653 61 76 Email mailto:evrenzincir@hotmail.com
     Certificate No. MD00/0468/0005/9b Expiry: 11/01/2012



United Kingdom
AQUALIFT Ltd.                                                        Forged Fittings                 U1, U2, U3                                76.00            Liverpool
   Meeting Lane
   Brierley Hill
   West Midlands DY5 3LB
     Tel: +44 01384 77255 Fax: +44 01384 77254 EMail mailto:sales@aqualift.co.uk Web page http:\\www.aqualift.co.uk
     Certificate No. MD00/1989/0004/9b Expiry: 09/04/2011




                                                                                     Page     5                                                  As at 02 November 2010
                                                                               List 9b
                                                                    Approved Manufacturers of
                                                                     Fittings for Chain Cable
                                                                                                                                Max Nominal Diameter
Name and Address                                                        Category                     Grades                                    (mm)                Office

MICRON ALLOY CASTINGS                                                   Cast Fittings                U1, U2, U3                                105.00            Liverpool
    Platts Road Industrial Estate
    Amblecote
    Stourbridge
    West Midlands DY8 4YR
     Tel +44 (0)1384 393247 Fax +44 (0)1384 444860 Email: mailto:info@micronalloys.co.uk Web page: http://www.micronalloys.co.uk
     Certificate No. MD00/1845/0004/9b Expiry: 19/06/2012

THE SOLID SWIVEL CO., LTD.                                              Forged Fittings              U1, U2, U3, R3, R3S                        66.00            Liverpool
    Portersfield Road
    Cradley Heath
    West Midlands
    B64 7BL
     Including non-ferrous fittings to NES 171 (Def Stan 07-209) for approved applications.

     Includes manufacture of single links up to 35mm nominal dia for Al Si Br Chain Accessories to NES 171 (Def Stan 07-209).

     Tel: +44 1384 636421 Fax: +44 1384 639163 Email mailto:info@solidswivel.co.uk Web http://www.solidswivel.co.uk
     Certificate No. MD00/3028/0004/9b Expiry: 25/11/2012




                                                                                        Page   6                                                  As at 02 November 2010

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:338
posted:2/3/2011
language:English
pages:6