Marantz PM6003 manual - PM6003 by dfsiopmhy6

VIEWS: 369 PAGES: 20

									РУССКИЙ   SVENSKA   ITALIANO   ESPAÑOL   NEDERLANDS   DEUTSCH   FRANÇAIS   ENGLISH




                                          Integrated Amplifier
                                                 PM6003
                                                                                                                        La casa costruttrice declina ogni responsabilità per
ENGLISH                                                      NEDERLANDS
                                                                                                                        danni diretti o indiretti provocati dalla inosservanza        CE MARKING
WARRANTY                                                     GARANTIE                                                   delle prescrizioni di installazione, uso e manutenzione
For warranty information, contact your local Marantz         Voor inlichtingen omtrent garantie dient u zich tot uw     dettagliate nel presente manuale o per guasti dovuti ad       English
distributor.                                                 plaatselijke Marantz.                                      uso continuato a fini professionali.
                                                                                                                                                                                      The PM6003 is in conformity with the
RETAIN YOUR PURCHASE RECEIPT                                 UW KWITANTIE, KASSABON E.D. BEWAREN                                                                                      EMC directive and low-voltage directive.
Your purchase receipt is your permanent record of a          Uw kwitantie, kassabon e.d. vormen uw bewijs van           SVENSKA
valuable purchase. It should be kept in a safe place         aankoop van een waardevol artikel en dienen op een                                                                       Français
to be referred to as necessary for insurance purposes        veilige plaats bewaard te worden voor evt, verwijzing      GARANTI                                                       Le PM6003 est conforme à la directive
or when corresponding with Marantz.                          bijv, in verbend met verzekering of bij correspondentie    För information om garantin, kontakta Marantz                 EMC et à la directive sur les basses
IMPORTANT                                                    met Marantz.                                               lokalagent.                                                   tensions.
When seeking warranty service, it is the responsibility of   BELANGRIJK                                                 SPAR KVITTOT
                                                                                                                                                                                      Deutsch
the consumer to establish proof and date of purchase.        Bij een evt, beroep op de garantie is het de               Kvittot är ett inköpsbevis på en värdefull vara. Det skall
Your purchase receipt or invoice is adequate for such        verantwoordelijkheid van de consument een                  förvaras säkert och hänvisas till vid försäkringsfall         Das Modell PM6003 entspricht den
proof.                                                       gedateerd bewijs van aankoop te tonen. Uw kassabon         eller vidkorrespondens mod Marantz.                           EMC-Richtlinien und den Richtlinien für
                                                             of factuurzijn voldoende bewijs.                           VIKTIGT                                                       Niederspannungsgeräte.
FOR U.K. ONLY
This undertaking is in addition to a consumer's                                                                         Fö att garantin skall gälla är det kundens sak att            Nederlands
statutory rights and does not affect those rights in         ESPAÑOL                                                    framställa bevis och datum om köpet. Kvitto eller
                                                                                                                                                                                      De PM6003 voldoet aan de EMC eisen
any way.                                                                                                                faktura är tillräokligt bevis fö detta.
                                                                                                                                                                                      en de vereisten voor laag-voltage.
                                                             GARANTIA
                                                             Para obtener información acerca de la garantia                                                                           Español
FRANÇAIS                                                                                                                РУССКИЙ
                                                             póngase en contacto con su distribuidor Marantz.                                                                         El PM6003 está de acuerdo con las
GARANTIE                                                     GUARDE SU RECIBO DE COMPRA                                 ГАРАНТИЯ                                                      normas EMC y las relacionadas con baja
Pour des informations sur la garantie, contacter le          Su recibo de compra es su prueba permanente de             О т н о с и т е л ь н о и н ф о р м а ц и и о га ра н т и и   tensión.
distributeur local Marantz.                                  haber adquirido un aparato de valor, Este recibo           обращайтесь к Вашему местному дистрибьютору
                                                                                                                                                                                      Italiano
CONSERVER L'ATTESTATION D'ACHAT                              deberá guardarlo en un lugar seguro y utilizarlo           Marantz.
                                                             como referencia cuando tenga que hacer uso del                                                                           Il PM6003 è conforme alle direttive CEE
L'attestation d'achat est la preuve permanente                                                                          СОХРАНИТЕ ВАШУ КВИТАНЦИЮ О ПОКУПКЕ
                                                             seguro o se ponga en contacto con Marantz.                 Ваша квитанция о покупке является документом,                 ed a quelle per i bassi voltaggi.
d'un achat de valeur. La conserver en lieu sur pour
s'y reporter aux fins d'obtention d'une couverture            IMPORTANTE                                                 свидетельствующим о дорогостоящей покупке.                    Svenska
d'assurance ou dans le cadre de correspondances              Cuando solicite el servicio otorgado por la garantia       Ее необходимо хранить в безопасном месте и
                                                                                                                                                                                      PM6003 är tillverkad i enlighet med
avec Marantz.                                                el usuario tiene la responsabilidad de demonstrar          в случае необходимости использовать в целях
                                                                                                                                                                                      EMC direktiven och direktiven för
IMPORTANT                                                    cuándo efectuó la compra. En este caso, su recibo          страхования или при обращении в компанию
                                                             de compra será la prueba apropiada.                        Marantz.                                                      lågvoltsutrusning.
Pour l'obtention d'un service couvert par la garantie, il
incombe au client d'établir la preuve de l'achat et d'en                                                                ВАЖНО                                                         Русский
corroborer la date. Le reçu ou la facture constituent        ITALIANO                                                   При обращении за гарантийным обслуживанием                    Модель PM6003 соответствует
des preuves suffisantes.                                                                                                 обязанностью потребителя является                             директиве EMC и директиве о
                                                             GARANZIA                                                   подтверждение факта и даты покупки. Для                       низковольтных устройствах.
                                                             L’apparecchio è coperto da una garanzia di buon            такого доказательства достаточно предъявить
DEUTSCH                                                                                                                 квитанцию о покупке или счет.
                                                             funzionamento della durata di un anno, o del periodo
GARANTIE                                                     previsto dalla legge, a partire dalla data di acquisto     ТОЛЬКО ДЛЯ СОЕДИНЕННОГО КОРОЛЕВСТВА
Bei Garantiefragen wenden Sie sich bitte an Ihren            comprovata da un documento attestante il nominativo        Это используется в дополнение к законным
Marantz-Händler.                                             del Rivenditore e la data di vendita. La garanzia sarà     правам потребителя и ни в коей мере не
                                                             prestata con la sostituzione o la riparazione gratuita     ущемляет эти права.
HEBEN SIE IHRE QUITTING GUT AUF                              delle parti difettose.
Die Quittung dient Ihnen als bleibende Unterlage             Non sono coperti da garanzia difetti derivanti da
für Ihren wertvollen Einkauf Das Aufbewahren der             uso improprio, errata installazione, manutenzione
Quittung ist wichtig, da die darin enthaltenen Angaben       effettuata da personale non autorizzato o, comunque,
für Versicherungswecke oder bei Korrespondenz mit            da circostanze che non possano riferirsi a difetti di
Marantz angeführt werden müssen.                             funzionamento dell’apparecchio. Sono inoltre esclusi
WICHTIG!                                                     dalla garanzia gli interventi inerenti l’installazione e
Bei Garantiefragen muß der Kunde eine Kaufunterlage          l’allacciamento agli impianti di alimentazione.
mit Kaufdatum vorlegen. Ihren Quittung oder                  Gli apparecchi verranno riparati presso i nostri Centri
Rechnung ist als Unterlage ausreichend.                      di Assistenza Autorizzati. Le spese ed i rischi di
                                                             trasporto sono a carico del cliente.
English                                                   Français                                                   Deutsch                                                   Nederlands
                    WARNINGS                                              AVERTISSEMENTS                                              WARNHINWEISE                                            WAARSCHUWINGEN
- Do not expose the equipment to rain, moisture,          - Ne pas exposer l’appareil à la pluie, à l’humidité, à    - Das Gerät nicht Regen, Feuchtigkeit, Tropf- oder        - Stel het apparaat niet bloot aan regen, vocht,
  dripping or splashing.                                    l’égouttement ou aux éclaboussures.                        Spritzwasser aussetzen.                                   druppels of spetters.
- Do not remove the cover from the equipment.             - Ne pas essayer de retirer le boîtier de l’appareil.      - Die Abdeckung nicht vom Gerät abnehmen.                 - Verwijder de afdekplaat van het apparaat niet.
- Do not insert anything into the equipment through       - Ne rien insérer dans l’appareil par les orifices de       - Keine Gegenstände durch die Belüftungsschlitze          - Duw niets door de ventilatieopeningen in het
  the ventilation holes.                                    ventilation.                                               stecken.                                                  apparaat.
- Do not handle the mains cord with wet hands.            - Ne pas manipuler le cordon d’alimentation avec les       - Das Netzkabel nicht mit feuchten oder nassen            - Raak het netsnoer niet met natte handen aan.
- Do not cover the ventilation with any items such as       mains mouillées.                                           Händen anfassen.                                        - Bedek de ventilatieopeningen niet met enige
  tablecloths, newspapers, curtains, etc.                 - Ne pas recouvrir les ouïes de ventilation avec un        - Decken Sie die Lüftungsöffnungen nicht mit einem          voorwerpen, zoals tafelkleden, kranten, gordijnen,
- No naked flame sources, such as lighted candles,           objet quelconque comme une nappe, un journal,              Tischtuch, einer Zeitung, einem Vorhang usw. ab.          enz.
  should be placed on the equipment.                        un rideau, etc.                                          - Es dürfen keine Gegenstände mit offener Flamme,         - Plaats geen brandende voorwerpen, zoals kaarsen,
- When disposing of used batteries, please comply         - Ne placer aucune source de flamme nue, comme                wie etwa brennende Kerzen, auf dem Gerät                  op het apparaat.
  with governmental regulations or environmental            une bougie allumée, sur l'appareil.                        aufgestellt werden.                                     - Volg bij het weggooien van verbruikte batterijen de
  public instruction’s rules that apply in your country   - Pour mettre au rebut les piles usées, respecter les      - Beachten Sie bei der Entsorgung der verbrauchten          overheidswetgeving of milieuvoorschriften op die
  or area.                                                  lois gouvernementales ou les règlements officiels           Batterien alle geltenden lokalen und überregionalen       van kracht zijn in het land of de regio waarin u zich
- No objects filled with liquids, such as vases, shall       concernant l’environnement qui s'appliquent à              Regelungen.                                               bevindt.
  be placed on the equipment.                               votre pays ou région.                                    - Auf das Gerät dürfen keine mit Flüssigkeiten gefüllte   - Plaats geen voorwerpen met een vloeistof erin,
- When the switch is in the OFF position, the             - Aucun objet rempli de liquide, un vase par exemple,        Behälter, wie etwa eine Vase, gestellt werden.            zoals een bloemenvaas, op het apparaat.
  equipment is not completely switched off from             ne doit être placé sur l'appareil.                       - Wenn der Schalter ausgeschaltet ist (OFF-Position),     - Als de schakelaar op OFF staat, is het apparaat
  MAINS.                                                  - Lorsque l'interrupteur est sur la position OFF,            ist das Gerät nicht vollständig vom Stromnetz             niet volledig losgekoppeld van de netspanning
- The equipment shall be installed near the                 l'appareil n'est pas complètement déconnecté du            (MAINS) abgetrennt.                                       (MAINS).
  power supply so that the power supply is easily           SECTEUR (MAINS).                                         - Das Gerät sollte in der Nähe einer Netzsteckdose        - De apparatuur wordt in de buurt van het stopcontact
  accessible.                                             - L'appareil sera installé près de la source                 aufgestellt werden, damit es leicht an das Stromnetz      geïnstalleerd, zodat dit altijd gemakkelijk
- Do not expose the unit to excessive heat such as          d'alimentation, de sorte que cette dernière soit           angeschlossen werden kann.                                toegankelijk is.
  direct sunlight, fire or the like.                         facilement accessible.                                   - Setzen Sie das Gerät keiner übermäßigen                 - Stel het apparaat niet bloot aan grote warmte, zoals
- Do not touch hot areas, especially around the “hot      - Ne pas exposer l’appareil à une chaleur excessive,         Wärme aus, z.B. durch Aufstellung in direkter             direct zonlicht, vuur en dergelijke.
  surface mark” during and immediately after use.           comme celle des rayons directs du soleil, d’un feu,        Sonneneinstrahlung, in der Nähe eines offenen           - Raak hete gedeelten van het apparaat, vooral rond
- During and immediately after use, this product            etc.                                                       Feuers usw.                                               de “markering warm oppervlak”, niet aan tijdens en
  is hot in areas other than the controls and rear        - Ne pas toucher aux zones chaudes, notamment              - Berühren Sie während oder unmittelbar nach                onmiddellijk na het gebruik.
  panel connection jacks. Do not touch hot areas,           celles se trouvant autour du « signal zone chaude »        dem Gebrauch keine heißen Stellen des Gerätes,          - Tijdens en onmiddellijk na het gebruik is dit
  especially around the “hot surface mark” and the          pendant et immédiatement après l’utilisation.              insbesondere nicht im Bereich des Warnsymbols             apparaat heet, behalve in de omgeving van de
  top panel. Contact with hot areas can cause burns.      - Pendant l’utilisation et immédiatement après, cet          "Vorsicht, heiße Oberfläche".                              bedieningstoetsen en de aansluitingen op het
                                                            appareil est chaud en dehors des commandes et            - Während oder unmittelbar nach dem Gebrauch ist            achterpaneel.
                                                            des prises de raccordement arrière.                        dieses Gerät mit Ausnahme der Bedienelemente              Raak hete gedeelten van het apparaat, vooral
                                                            Ne pas toucher aux zones chaudes, notamment celles         und der Anschlussbuchsen auf der Rückseite heiß.          rond de "markering warm oppervlak" en het
                                                            se trouvant autour du « signal zone chaude » et le         Berühren Sie die heißen Stellen und insbesondere          bovenpaneel, niet aan. Contact met hete plekken
                  Hot surface mark
                                                            panneau supérieur, pour éviter tout risque de brûlure.     den Bereich um das Warnsymbol “Vorsicht, heiße            kan brandwonden veroorzaken.
- Do not expose the batteries to excessive heat such                                                                   Oberfläche” nicht. Der Kontakt mit heißen Flächen
  as direct sunlight, fire or the like.                                                                                 kann zu Verbrennungen führen.


                                                                           Signal zone chaude                                                                                            Markering warm oppervlak

                                                          - N’exposez pas les piles à une chaleur excessive,                        Warnsymbol “Vorsicht,                      - Stel de batterijen niet bloot aan overdreven warmte
                                                            comme par exemple aux rayons directs du soleil,                          heiße Oberfläche”                            zoals directe zonnestraling, vuur en dies meer.
                                                            au feu, etc.
                                                                                                                     - Die Batterien dürfen nicht übermäßiger Wärme,
                                                                                                                       wie z. B. direktem Sonnenlicht, offenen Flammen
                                                                                                                       oder dergleichen ausgesetzt werden.
Español                                                Italiano                                                  Svenska                                                  Русский
                 ADVERTENCIAS                                             AVVERTENZE                                                VARNINGAR                                           ПРЕДУПРЕЖДЕНИЯ
- No exponga el equipo a la lluvia, la humedad,        - Non esporre l’apparecchio alla pioggia, all’umidità,    - Utsätt inte utrustningen för regn, fukt, droppande     - Не подвергайте это оборудование воздействию
  goteos o salpicaduras.                                 al gocciolamento o agli spruzzi.                          vatten eller vattenstänk.                                дождя, влаги, капающей жидкости или брызг.
- No extraiga la tapa del equipo.                      - Non rimuovere il coperchio dell’apparecchio.            - Ta inte bort utrustningens hölje.                      - Не удаляйте крышку с оборудования.
- No introduzca nada en el interior del equipo a       - Non introdurre oggetti all’interno dell’apparecchio     - För inte in föremål i utrustningen genom               - Не вставляйте посторонние предметы
  través de los orificios de ventilación.                 attraverso i fori di ventilazione.                        ventilationshålen.                                       в оборудование через вентиляционные
- No maneje el cable de alimentación con las manos     - Non toccare il cavo di alimentazione con le mani        - Hantera inte nätsladden med våta händer.                 отверстия.
  mojadas.                                               bagnate.                                                - Täck inte för ventilationsöppningarna med några        - Не прикасайтесь влажными руками к сетевому
- No cubra la ventilación con objetos como manteles,   - Non coprire le fessure di ventilazione con tovaglie,      föremål som till exempel bordsdukar, dagstidningar,      шнуру.
  periódicos, cortinas, etc.                             giornali, tende od oggetti analoghi.                      gardiner e.d.                                          - Не закрывайте вентиляционные отверстия
- No deben colocarse sobre el equipo elementos con     - Non posare sull'apparecchio sorgenti di fiamme           - Inga föremål med öppen låga, som till exempel            такими предметами, как скатерти, газеты,
  fuego, por ejemplo velas encendidas.                   scoperte quali candele accese.                            tända stearinljus, bör placeras på utrustningen.         занавески и т.д.
- Cuando se eliminen baterías usadas, deben            - Smaltire le pile usate in conformità alle norme         - Följ de lagar och miljöskyddsråd som gäller i det      - Не помещайте на оборудование источники
  cumplirse las reglamentaciones oficiales o las         governative o disposizioni ambientali vigenti nel         land eller område där du bor när du gör dig av med       открытого огня, например, горящие свечи.
  normas de protección medioambiental aplicables         proprio paese o zona.                                     batterier.                                             - При утилизации использованных батареек
  en su país o en su zona.                             - Non mettere sull'apparecchiatura alcun contenitore      - Inga objekt som är fyllda med någon vätska,              соблюдайте, пожалуйста, государственные
- No se deben colocar sobre el aparato recipientes       di liquido, come ad esempio dei vasi.                     till exempel blomstervaser, bör placeras på              законы или общественные правила об охране
  que contengan líquidos, como por ejemplo             - Quando l'interruttore è nella posizione OFF,              apparaten.                                               окружающей среды, которые применяются в
  jarrones.                                              l'apparecchiatura non è completamente scollegata        - Även om strömbrytaren står i det avstängda läget         Вашей стране или области.
- Cuando el interruptor está en la posición OFF, el      da MAINS.                                                 OFF, så är utrustningen inte helt bortkopplad från     - Не помещайте на оборудование никакие
  equipo no está completamente desconectado de         - L’apparecchio va installato in prossimità della fonte     det elektriska nätet (MAINS).                            предметы, наполненные жидкостью, например,
  la alimentación MAINS.                                 di alimentazione, in modo che quest’ultima sia          - Utrustningen ska vara installerad nära strömuttaget      вазы.
- El equipo se instalará cerca de la fuente de           facilmente accessibile.                                   så att strömförsörjningen är lätt att tillgå.          - Когда переключатель находится в положении
  alimentación de manera que resulte fácil acceder a   - Non esporre l’unità ad eccessivo calore come la         - Utsätt inte enheten för kraftig värme, såsom direkt          ,
                                                                                                                                                                            OFF оборудование не полностью отключено от
  ella.                                                  luce diretta del sole, il fuoco o simili.                 solljus, eld eller liknande.                             сети переменного тока.
- No exponga la unidad a un calor excesivo, como       - Non toccare le parti calde, né durante, soprattutto     - Vidrör inte varma områden, särskilt omkring            - Оборудование должно быть установлено около
  el derivado de la luz directa del sol, el fuego, o     se contrassegnate dal “simbolo di superficie calda”,       “Varm yta”-märket, under och omedelbart efter            источника питания, так чтобы источник питания
  similar.                                               né immediatamente dopo l'uso.                             användning.                                              был легкодоступен.
- No tocar las áreas calientes especialmente           - Durante, e subito dopo l’utilizzo, l’unità risulta      - Bortsett från kontrollerna och anslutningsuttagen      - Не подвергайте этот аппарат сильному
  alrededor del “símbolo de superficie caliente”         essere molto calda in alcune sue parti come ad            på baksidan är enheten varm under och omedelbart         нагреванию, например, из-за воздействия
  mientras la unidad está en uso ni inmediatamente       esempio I connettori del pannello posteriore.             efter användning.                                        прямого солнечного света, пламени и т.п.
  después.                                               Non toccare le par ti calde, soprattutto se               Vidrör inte varma områden, särskilt inte "varm yta"-   - Во время и сразу после использования не
- Mientras está en funcionamiento e inmediatamente       contrassegnate dal “simbolo di superficie calda” e         märket eller ovansidan.                                  прикасайтесь к горячим участкам, особенно
  después de su uso, la unidad presenta zonas            specialmente la superficie del pannello. Il contatto                                                                вокруг значка «горячая поверхность».
                                                                                                                   Kontakt med varma ytor kan orsaka brännskador.
  calientes en diversas partes, no exclusivamente en     con parti calde può provocare ustioni.                                                                           - Во время и сразу после использования это
  el sector de los controles o en las conexiones del                                                                                                                        изделие является горячим на участках
  panel posterior.                                                                                                                                                          вне органов управления и задней панели с
  No tocar las áreas calientes, especialmente                                                                                                                               соединительными гнездами. Не прикасайтесь
  alrededor del “símbolo de superficie caliente” y                                                                                  “Varm yta”-märke                         к горячим участкам, особенно вокруг значка
                                                                    Simbolo di superficie calda                                                                              «горяая поверхность» и к верхней панели.
  el panel superior dado que pueden producirse
                                                                                                                 - Utsätt inte batterierna för stark värme såsom direkt     Контакт с горячими участками может вызвать
  quemaduras.                                          - Non esporre le batterie a un calore eccessivo, per        solljus, eld eller liknande.                             ожог.
                                                         esempio alla luce solare diretta, al fuoco o simili.



           Símbolo de superficie caliente
                                                                                                                                                                                    Значок «горячая поверхность»
- No exponga las pilas a un calor excesivo como, por
                                                                                                                                                                          - Не подвергайте батарейки чрезмерному
  ejemplo, luz solar directa, fuego, etc.
                                                                                                                                                                            нагреванию, например, воздействию прямого
                                                                                                                                                                            солнечного света, огня и т.п.
                                                                                                                                                                                                           AMPRC_090130N1
                                                ИНТЕГРИРОВАННЫЙ
                                                   УСИЛИТЕЛЬ
                                                             Marantz PM6003                                               46
                                                       (РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ)
Вы приобрели устройство усилительное/преобразовательное производства компании "D&M Холдингс Инк", Япония ("D & M Holdings Inc.", Japan). Модель РM6003
является интегрированным усилителем и предназначена для усиления аудиосигналов в домашних аудиосистемах. Это изделие широко известно в кругах
истинных ценителей высококлассного звука. Качество и безопасность подтверждены множеством тестов, проведенных как зарубежными, так и российскими
испытательными лабораториями.

Изготовитель в течение 3 лет (срок службы) после выпуска данного изделия обеспечивает наличие комплектующих в целях возможности проведения ремонта
и технического обслуживания, по истечении которого эксплуатация и техническое обслуживание продолжается в соответствии с действующими нормативными
документами. Изделие остается безопасным для жизни, здоровья человека и окружающей среды в течение всего срока эксплуатации. Гарантийный срок - 1 год.

                                                        Информация о Российской сертификации

         No сертификата           Орган по                                                                                            Срок действия
                                                     Нормативные документы          Наименование сертифицированной продукции
          соответствия          сертификации                                                                                           сертификата
      РОСС JP.АЯ46.B78128    РОСТЕСТ-МОСКВА ГОСТ Р МЭК 60065-2005              Устройства усилительные/ преобразовательные           До 18.04.2011
                                            ГОСТ 22505-97
                                            ГОСТ Р 51515-99
                                            ГОСТ Р 51317.3.2-2006 (Рaзд. 6, 7)
                                            ГОСТ Р 51317.3.3-99


                                                         Основные технические характеристики
См. в конце инструкции
ВНИМАНИЕ: Если Вы приобрели аудиоаппаратуру надлежащего качества, то, по Российским законам, она не подлежит возврату или обмену на аналогичный товар других
размера, формы и т.д.

                                                                   D&M Холдингс Инк
                                                            Здание D&M, 2-1 Ниссин-тё
                                                        Кавасаки-ку, Кавасаки-си, Канагава
                                                                 2108569, Япония
                                                                 D&M Holdings Inc.
                                                           D&M Building, 2-1 Nisshin-Cho
                                                        Kawasaki-Ku, Kawasaki-Shi, Kanagawa
                                                                  2108569, Japan
                                                                                                                                                                                                                                                                                            ENGLISH



   INTRODUCTION                                                                                                 CONTENTS




                                                                                                                                                                                                                                                                                                                       NAMES AND
                                                                                                                                                                                                                                                                                                                       FUNCTIONS
Thank you for selecting the Marantz PM6003 Integrated amplifier for your Audio system.
Please read these operating instructions carefully. We recommend that you read the entire user guide before
                                                                                                              INTRODUCTION .........................................................................................................................................1
you attempt to connect or operate the amplifier.
After you have reviewed the contents of this manual, we suggest that you make all system connections          CONTENTS ..................................................................................................................................................1
before you attempt to operate the unit.




                                                                                                                                                                                                                                                                                                                       CONNECTIONS
                                                                                                              FEATURES ...................................................................................................................................................2




                                                                                                                                                                                                                                                                                                                          BASIC
  ACCESSORIES CHECK
Before use, check the below accessories were included in the package.                                         BEFORE USE ...............................................................................................................................................2
• Remote controller                                    • User Guide                                           NAMES AND FUNCTIONS .......................................................................................................................4
                                                                                                                 FRONT PANEL.................................................................................................................................................................................. 4




                                                                                                                                                                                                                                                                                                                       OPERATION
                                                                                                                 REMOTE CONTROLLER .................................................................................................................................................................. 5




                                                                                                                                                                                                                                                                                                                         BASIC
                                                                                                                 REAR PANEL .................................................................................................................................................................................... 6

                                                                                                              BASIC CONNECTIONS .............................................................................................................................7
                                                                                                                 CONNECTION OF AUDIO COMPONENTS.................................................................................................................................. 7




                                                                                                                                                                                                                                                                                                                       CONNECTION
                                                                                                                                                                                                                                                                                                                        ADVANCED
                                                                                                                 CONNECTION OF SPEAKER SYSTEMS ...................................................................................................................................... 8
                                                                                                                 CONNECTION OF AC POWER CABLE ......................................................................................................................................... 8

                                                                                                              BASIC OPERATION ...................................................................................................................................9
                                                                                                                 OPERATION PROCEDURES ........................................................................................................................................................... 9




                                                                                                                                                                                                                                                                                                                       REMOTE CONTROLLER
                                                                                                                 RECORDER OPERATION ................................................................................................................................................................ 9




                                                                                                                                                                                                                                                                                                                          OPERATION
                                                                                                              ADVANCED CONNECTION ....................................................................................................................10
                                                                                                                 CONNECTING THE REMOTE CONTROL JACKS .....................................................................................................................10
                                                               A NOTE ABOUT RECYCLING
                                                                                                              REMOTE CONTROLLER OPERATION ...................................................................................................11




                                                                                                                                                                                                                                                                                                                           TROUBLESHOOTING
• Size “AAA” batteries x 2                                                                                       REMOTE CONTROL CODE SETTING .........................................................................................................................................12

                                                                                                              TROUBLESHOOTING...............................................................................................................................12
                                                         This product’s packaging materials are
                                                         recyclable and can be reused. This product
                                                         and the accessories packed together are the          OTHERS .....................................................................................................................................................13
                                                         applicable product to the WEEE directive                SPECIFICATIONS ..........................................................................................................................................................................13
                                                         except batteries.




                                                                                                                                                                                                                                                                                                                           OTHERS
• AC power cable                                                                                                 DIMENSIONS ................................................................................................................................................................................13
                                                         Please dispose of any materials in accordance
                                                         with your local recycling regulations.                  CLEANING OF EQUIPMENT EXTERNAL SURFACES..............................................................................................................14
                                                         When discarding the unit, comply with your
                                                                                                                 USING HEADPHONES..................................................................................................................................................................14
                                                         local rules or regulations.
                                                         Batteries should never be thrown away or                REPAIRS..........................................................................................................................................................................................14
                                                         incinerated but disposed of in accordance with
                                                         your local regulations concerning chemical
                                                         wastes.


                                                                                                                                                                                                                                                                                                                       1
                           ENGLISH



                            FEATURES                                                                                                                                                        BEFORE USE
NAMES AND
FUNCTIONS




                                                                                                                                                                                         This section must be read before any connection is      To ensure proper heat radiation, ensure the below
                                                                                                                                                                                         made to the mains supply.                               clearance from walls and other equipment.

                                                                                                                                                                                                                                                   Left                                                                                                                                                           Right
                                                                                PHONO       TUNER      CD       AUX/DVD        1   RECORDER   2        MUTE                                EQUIPMENT MAINS WORKING SETTING                         0.2 m or more
                                                                                                                                                                                                                                                                                            Above
                                                                                                                                                                                                                                                                                                                                                                                                         0.2 m or more
                                                                                                                                                                                                                                                                                            0.2 m or more
CONNECTIONS




                                                                                                                                                                                         Your Marantz product has been prepared to comply
                                                               INPUT SELECTOR                                                                                       VOLUME
                                                                                       SOURCE DIRECT        A   SPEAKERS   B              LOUDNESS



                                                                                                                                                                                                                                                                                                      PHONO       TUNER      CD       AUX/DVD        1   RECORDER   2        MUTE




                                                                                                                                                                                         with the household power and safety requirements                                            INPUT SELECTOR
                                                                                                                                                                                                                                                                                                             SOURCE DIRECT        A   SPEAKERS   B              LOUDNESS
                                                                                                                                                                                                                                                                                                                                                                                          VOLUME
   BASIC




                                                                                BASS                            TREBLE                                BALANCE
                                         STANDBY                                                                                                                             MIN   MAX
                                                                                                                                                                                                                                                                                                      BASS                            TREBLE                                BALANCE
                                                                                                                                                                                                                                                               STANDBY                                                                                                                             MIN    MAX


                                       POWER ON/OFF
                                                      PHONES
                                                                                                                                                                                         that exist in your area.                                            POWER ON/OFF
                                                                                                                                                                                                                                                                            PHONES




                                                                                                                                                                                                                                                                                                                                                                        L             R




                                                                                                                                                  L             R
                                                                                                                                                                                         PM6003 can be powered by 230V AC only.


                                                                                                                                                                                           COPYRIGHT                                                                                                                                                                                                              Rear
                                                                                                                                                                                         Recording and playback of any material may                                                                                                                                                                      0.2 m or more
OPERATION




                                                                                                                                                                                         require consent. For further information refer to the
                          • Toroidal Transformer
  BASIC




                                                                                                                                                                                         following:
                                                                                                                                                                                         — Copyright Act 1956
                          • Custom Capacitor
                                                                                                                                                                                         — Dramatic and Musical Performers Act 1958
                          • Gold Plated Dual Speaker Terminals A & B                                                                                                                     — Performers Protection Acts 1963 and 1972
                          • Current feedback amplifier for both pre-amplifier and power                                                                                                    — Any subsequent statutory enactments and
CONNECTION




                                                                                                                                                                                             orders
 ADVANCED




                            amplifier
                          • Wide range, high speed playback for super audio sources                                                                                                        DO NOT LOCATE IN THE FOLLOWING                          KEEP OBJECTS OFF
                                                                                                                                                                                           PLACES                                                Keep objects off the PM6003. Blocking the vent can
                          • Improved and optimized the circuit design, parts and pattern wiring                                                                                                                                                  result in accident and damage.
                                                                                                                                                                                         To ensure long-lasting use, do not locate the
                          • Input buffer circuit for high S/N ratio and high channel separation                                                                                          PM6003 where:
REMOTE CONTROLLER




                                                                                                                                                                                         • Exposed to direct sunlight.
   OPERATION




                          • Active filter type tone control circuit                                                                                                                                                                                 DO NOT TOUCH HOT SPOTS DURING AND
                                                                                                                                                                                         • Near to sources of heat such as heaters.
                          • Source direct function for purity audio playback                                                                                                             • Highly humid or poorly ventilated.                      IMMEDIATELY AFTER USE
                                                                                                                                                                                         • Dusty.                                                During and immediately after use, the PM6003 is
                          • Phono equalizer amplifier (for MM cartridge)                                                                                                                                                                          hot in areas other than the controls and rear panel
                                                                                                                                                                                         • Subjected to mechanical vibrations.
                                                                                                                                                                                                                                                 connection jacks. Do not touch hot spots and
                          • System remote control
    TROUBLESHOOTING




                                                                                                                                                                                         • On wobbly, inclined or otherwise unstable             especially the top panel. Contact with hot areas can
                                                                                                                                                                                           surfaces                                              cause burns.
                                                                                                                                                                                         • Radiated heat is blocked such as in cramped
                                                                                                                                                                                           audio racks.
    OTHERS




                      2
                                                                                                                                                                                                             ENGLISH



                                                                                                                                                                                                          BEFORE USE




                                                                                                                                                                                                                            NAMES AND
                                                                                                                                                                                                                            FUNCTIONS
  FOR USE OF REMOTE CONTROLLER                             CAUTIONS ON HANDLING BATTERIES                           OPERATABLE RANGE OF REMOTE
                                                        Misuse of the batteries can result in electrolyte           CONTROLLER                                                INFORMATION FOR USERS ON
LOADING BATTERIES                                       leakage, rupturing, corrosion, etc.                                                                                 COLLECTION AND DISPOSAL OF OLD
                                                                                                                  Operate the unit with the remote controller within
Before using the remote controller for the first time,   Bear in mind the following points when using              the range of the illustration below.                      EQUIPMENT AND USED BATTERIES
load the batteries in the remote controller. The        batteries.




                                                                                                                                                                                                                            CONNECTIONS
batteries provided are used to verify the operations    • Remove the batteries from the remote control




                                                                                                                                                                                                                               BASIC
of the remote controller only.                             unit if the unit is not going to be used for a
                                                           prolonged period (a month or more).
1.   Remove the battery cover.                          • Do not use an old battery together with a new           Approx. 5m
                                                           one.
                                                        • Insert the batteries while ensuring that their
                                                           ª and · poles are properly aligned with the




                                                                                                                                                                                                                            OPERATION
                                                           corresponding markings on the remote control




                                                                                                                                                                                                                              BASIC
                                                           unit.
                                                        • Batteries with the same shape may have different
                                                           voltages. Do not use different types of batteries
                                                           together.                                                     Remote controller                                  When discarding the unit, comply with local
                                                        • If electrolyte has leaked, thoroughly wipe the                                                                    rules or regulations.
                                                           inside of the battery compartment, and then                                                                      Batteries should never be thrown away or




                                                                                                                                                                                                                            CONNECTION
                                                                                                                                                                                                                             ADVANCED
2.   Insert the batteries with correct +/–                 insert new batteries.                                   Caution                                                  incinerated but disposed of in accordance
     orientation.                                       • When batteries which are no longer required are                                                                   with the local regulations concerning battery
                                                                                                                    • Do not allow direct sunlight, an inverter             disposal.
                                                           to be discarded, follow the directions (regulations)       fluorescent light or other strong source of light to
                                                           laid down by the local authorities in the area             shine onto the playerʼs infrared receptor window.
                                                           concerned for their disposal.                              Otherwise, the operation of the remote controller
                                                                                                                      may be disabled.




                                                                                                                                                                                                                            REMOTE CONTROLLER
                                                                                                                    • Bear in mind that operating the remote controller




                                                                                                                                                                                                                               OPERATION
                                                                                                                      may cause other devices operated by infrared
                                                                                                                      rays to be operated by mistake.
                                                                                                                    • The remote controller cannot be operated if the
                                                                                                                      space between the controller and the playerʼs
                                                                                                                      infrared receptor window is obstructed.
                                                                                                                    • Do not place any objects on top of the remote




                                                                                                                                                                                                                                TROUBLESHOOTING
                                                                                                                      controller.
3.   Close the battery cover until it clicks shut.                                                                    Doing so may cause one or more buttons to be
                                                                                                                      held down which will cause the batteries to run
                                                                                                                      down.




                                                                                                                                                                                                                                OTHERS
                                                                                                                                                                                                                            3
                            ENGLISH



                             NAMES AND FUNCTIONS
NAMES AND
FUNCTIONS




                          FRONT PANEL                                                                                                                                                            o BALANCE CONTROL
                                                                                                                                                                                                 Turn the knob to correct an unbalanced program
                                                                                                                                                                                                 source such as stereo broadcast or to vary the
                                                                                                                                                                                                 output level of the left or right channel. Note that, if
                                                                                                                                                                                                 the BALANCE control is turned fully in one direction,
CONNECTIONS




                                                                                                                                                                                                 the sound will not be heard from the speaker on the
   BASIC




                                                                                                                                                                                                 other side.


                                                                                                                                                                                                 !0 LOUDNESS button and indicator
                                                                                                                                                                                                 This button turns LOUDNESS ON and OFF. When
                                                                                                                                                                                                 LOUDNESS is ON, the center of the button is lit.
                                                                                                                                                                                                 The LOUDNESS compensates for human hearing
OPERATION




                                                                                                                                                                                                 characteristics by boosting the bass and treble
  BASIC




                                                                                                                                                                                                 response at low volume levels to achieve a more
                                                                                                                                                                                                 pleasing tonal balance.


                                                                                                                                                                                                 !1 SPEAKERS A/B buttons and
                                                                                                                                                                                                    indicators
CONNECTION
 ADVANCED




                                                                                                                                                                                                 These buttons turn the speaker output to the
                          q POWER SWITCH                                        r SOURCE DIRECT button and                              y MUTE INDICATOR                                         speakers connected to the SPEAKER SYSTEMS
                                                                                  indicator                                                                                                      A/B terminals on the rear panel ON and OFF. When
                          Pressing once switches the power ON, and pressing                                                             Light up when the MUTE button in the remote
                                                                                                                                                                                                 speaker output is ON, the center of the button is
                          again switches it OFF.                                This button turns SOURCE DIRECT mode ON and             controller is pressed.
                                                                                                                                                                                                 lit. To listen with headphones, turn speaker output
                          If the POWER switch is in the ON position, the        OFF. When SOURCE DIRECT is ON, the center of                                                                     OFF.
REMOTE CONTROLLER




                          power of this unit can be turned ON/OFF by pressing   the button is lit. In the Source Direct mode, the        Note
                          the POWER button on the remote controller.            audio signals bypass the tone control circuit.
   OPERATION




                                                                                                                                          Be sure to check the VOLUME control setting
                                                                                                                                          before pressing this switch to cancel muting. If the   !2 BASS AND TREBLE TONE
                          w STANDBY INDICATOR                                                                                             muting is canceled while the volume setting is high,      CONTROLS
                                                                                t FUNCTION INDICATORS                                     the speakers could be damaged.
                          Lights up when the unit is in the standby mode.                                                                                                                        Adjusts the tone by controlling the levels of two
                                                                                One of the indicators lights up to indicate the input
                                                                                                                                                                                                 frequency bands. Turn each control toward (+) to
                                                                                source selected with the INPUT SELECTOR.
                                                                                                                                        u VOLUME CONTROL                                         enhance the corresponding frequency band, or
    TROUBLESHOOTING




                          e INPUT SELECTOR                                                                                                                                                       toward (–) to attenuate it.
                                                                                                                                        Adjusts the volume level. Turn the knob clockwise        TREBLE: Adjusts the high frequency level.
                          Selects the program source to be recorded or                                                                  to increase the volume.
                          played from the PHONO, TUNER, CD, AUX/DVD,                                                                                                                             BASS:      Adjusts the low frequency level.
                          RECORDER 1 (CD-R), and RECORDER 2 (MD/
                          TAPE).                                                                                                        i REMOTE SENSOR                                          !3 PHONES JACK
                                                                                                                                        The remote sensor receives the infrared commands         Insert the standard phone plug of the headphones
                                                                                                                                        from the remote controller. When an infrared signal      into this jack.
                                                                                                                                        is received from the remote controller. The remote
    OTHERS




                                                                                                                                        controller must always be pointed directly at the
                                                                                                                                        remote sensor.




                      4
                                                                                                                                                                                                          ENGLISH



                                                                                                                                                                                     NAMES AND FUNCTIONS




                                                                                                                                                                                                                          NAMES AND
                                                                                                                                                                                                                          FUNCTIONS
REMOTE CONTROLLER                                     z POWER ON/STANDBY buttons                             x Input selector buttons                                c VOLUME adjustment buttons
Using this remote controller, you can control the     a. MAIN POWER ON button                                • Input source Buttons                                  • MUTE Button
PM6003 and Marantz CD players, DVD players,           Turns the PM6003 power on when it is in the            These buttons are for directly selecting the input      This button activates the mute function. Pressing
tuners, tape decks etc. that have a remote control    standby mode.                                          source.                                                 this button again releases the MUTE function.




                                                                                                                                                                                                                          CONNECTIONS
receptor. The operations possible by remote                                                                                                                          The MUTE function can also be released by pressing
controller may differ with each component;            b. MAIN POWER STANDBY button                                                                                   either the VOLUME + or – buttons.
                                                                                                              Caution




                                                                                                                                                                                                                             BASIC
therefore see the instruction manual that came        Sets the PM6003 power to the standby mode when
with the component.                                   it is set to the power-on mode.                          Some input jacks of this unit and the corresponding   • VOLUME + Button
                                                                                                               input selector buttons on the remote controller       This button increases the volume level.
                                                      c. SOURCE POWER button                                   differ, as shown below.
The remote controller buttons are laid out as shown                                                                                                                  • VOLUME – Button
                                                      Switching the mode of a CD player, tuner, CD-R
below.
                                                      or other Marantz component equipped with a                                             Buttons on the          This button decreases the volume level.
                                                                                                                     The unit
                                                                                                                                            remote controller




                                                                                                                                                                                                                          OPERATION
                                                      power standby function between power-on and




                                                                                                                                                                                                                            BASIC
                                                      standby is enabled by pressing this button after the   AUX/DVD                     AUX, DVD
                                                      FUNCTION SELECT button corresponding to the                                                                    v SOURCE DIRECT button
                                                                                                             RECORDER2                   TAPE, MD
                                                      component has been pressed.                                                                                    This button turns SOURCE DIRECT mode ON and
      v                                  z
                                                      When this button is pressed after pressing the                                                                 OFF.
                                                                                                             For the input sources shown in the table above,
                                                      TUNER button, the tuner’s power is turned on;          although the same jacks are used for two types of
                                                      when it is pressed again, the tuner is set to the      sources on the unit, separate buttons are provided      b Component operating buttons




                                                                                                                                                                                                                          CONNECTION
                                                      standby mode.




                                                                                                                                                                                                                           ADVANCED
                                                                                                             on the remote controller.
                                                      When this button is pressed after pressing the AMP                                                             These buttons are for performing basic operations
                                                                                                             When using the remote controller for operation of
                                                      button, the PM6003 is switched from the power-on                                                               of a Marantz CD player, DVD player, etc. The
                                                                                                             a Marantz component connected to the unit, select
                                                      mode to the standby mode or vice versa.                                                                        function of each button changes to match the
                                                                                                             the input source first, then perform operations.
                                                      * The remote controller cannot be used to turn the                                                             component selected as the input source using the
                                         b                                                                   • INPUT 5 Button                                        input selector buttons.
                                                         primary power of the amplifier ON and OFF.
                                                                                                             This button is for forward-feeding the input source




                                                                                                                                                                                                                          REMOTE CONTROLLER
      x                                                                                                      indications to select a desired source.




                                                                                                                                                                                                                             OPERATION
                                         c                                                                   The input source indication, which is displayed on
                                                                                                             the function indicator on the main frame, is fed to
                                                                                                             the right.
                                                                                                             • INPUT ∞ Button
                                                                                                             This button is for backward-feeding the input source




                                                                                                                                                                                                                              TROUBLESHOOTING
                                                                                                             indications to select a desired source.
                                                                                                             The input source indication, which is displayed on
                                                                                                             the function indicator on the main frame, is fed to
                                                                                                             the left.

                                         b




                                                                                                                                                                                                                              OTHERS
                                                                                                                                                                                                                          5
                            ENGLISH



                          NAMES AND FUNCTIONS
NAMES AND
FUNCTIONS




                          REAR PANEL
CONNECTIONS
   BASIC
OPERATION
  BASIC




                                           q we r t y                     u                     i                                         o               !0
CONNECTION
 ADVANCED




                          q PHONO INPUT JACKS                                 t AUX/DVD INPUT JACKS                                  i SPEAKER SYSTEMS A / B
                          Connect the output jacks of a turntable to these    These are auxiliary input jacks which can be used to     TERMINALS
                          jacks.                                              connect the audio outputs of AV components such        Connect your speaker system(s) to these
                                                                              as DVD players, TV multiplex/stereo audio tuners,      terminals.
                                                                              VCRs, and laserdisc players.
                          w GND (GROUND) TERMINAL
                                                                                                                                     o REMOTE CONTROL BUS
REMOTE CONTROLLER




                          Connect the grounding wire from the turntable to
                                                                              y RECORDER 1 (CD-R) IN/OUT                               TERMINALS (REMOTE CONT. BUS)
   OPERATION




                          this terminal.
                                                                                JACKS                                                Another item of audio equipment with a remote
                                                                              Connect the play (output) jacks and record (input)     control bus terminal can be connected to these
                          e TUNER INPUT JACKS                                 jacks of CD Recorder to these jacks.                   terminals by using a special-purpose cable. The bus
                          Connect the output jacks of the tuner to these                                                             OUT terminal is used to send signals to another
                          jacks.                                                                                                     item of equipment. The bus IN terminal is used to
                                                                              u RECORDER 2 (MD/TAPE) IN/OUT
    TROUBLESHOOTING




                                                                                                                                     receive signals from another item of equipment.
                                                                                JACKS
                          r CD PLAYER INPUT JACKS
                                                                              Connect the play (output) jacks and record (input)
                          Connect the output jacks of a Compact Disc player   jacks of MD or tape decks to these jacks.              !0 AC IN socket
                          to these jacks.                                                                                            Connect the supplied AC power cable to this socket
                                                                                                                                     and a power outlet.
    OTHERS




                      6
                                                                                                                                     ENGLISH



   BASIC CONNECTIONS




                                                                                                                                               NAMES AND
                                                                                                                                               FUNCTIONS
                                                           Turntable
CONNECTION OF AUDIO                                                            Tuner                      CD recorder etc.
COMPONENTS
  CONNECTION OF TUNER




                                                                                                                                               CONNECTIONS
Connect the output jacks of your stereo tuner to the
TUNER jacks of this unit.




                                                                                                                                                  BASIC
                                                                                    OUTPUT            OUTPUT            INPUT
  CONNECTION OF COMPACT DISC PLAYER
Connect the output jacks of your CD player to the
CD jacks of this unit.




                                                                                                                                               OPERATION
                                                                                                                                                 BASIC
  CONNECTION OF TURNTABLE
Connect the L (Left) output cord of the turntable to
the “L” PHONO jack of this unit, and connect the
R (Right) output cord to the “R” PHONO jack. Also
be sure to connect the turntable’s grounding wire
to the GND jack of this unit. The GND jack does not




                                                                                                                                               CONNECTION
                                                                                                                                                ADVANCED
have to be connected if the turntable is not provided
with a grounding wire.
The cartridge of the connected turntable should
be of the MM type. To use a turntable with an
MC type cartridge, it is required to use a step-up
transformer.




                                                                                                                                               REMOTE CONTROLLER
                                                                                                                                                  OPERATION
  CONNECTION OF CD RECORDER ETC.
Connect the IN (recording input) jacks of the CD
recorder to the RECORDER 1 OUT jacks of this
unit, and connect the OUT (playback output) jacks
of the CD recorder to the RECORDER 1 IN jacks
of this unit.




                                                                                                                                                   TROUBLESHOOTING
  CONNECTION OF MD OR TAPE DECK ETC.                          OUTPUT                    OUTPUT          OUTPUT               INPUT
Connect the IN (recording input) jacks of the MD or
tape deck to the RECORDER 2 OUT jacks of this
unit, and connect the OUT (playback output) jacks of
the MD or tape deck to the RECORDER 2 IN jacks
of this unit.




                                                                                                                                                   OTHERS
                                                        CD player       Analog output jacks of DVD         MD or Tape deck etc.
                                                                       player, AV components, video
                                                                               disc player, etc.




                                                                                                                                               7
                            ENGLISH



                          BASIC CONNECTIONS
NAMES AND
FUNCTIONS




                          CONNECTION OF SPEAKER SYSTEMS                                                                                   WIRING SPEAKER CABLE                                  CONNECTION OF AC
                          This unit is equipped with two sets of SPEAKER SYSTEM terminals––SYSTEM A terminals and SYSTEM B              • Be careful not to short circuit in wiring speaker     POWER CABLE
                          terminals. Usually connect your speaker system to the SYSTEM A terminals.                                       cables.
                          • The speakers in the speaker system should have an impedance between 8 and 16 ohms. If speakers with         • Peel off the corting of speaker cable as shown        1.   Plug the power cable into AC IN jack on the
CONNECTIONS




                             an impedance of less than 8 ohms are connected, the protection circuitry may be activated during play.       below.                                                     back panel.
   BASIC




                          • Connect the Right channel speaker to the R terminals, and the Left channel speaker to the L terminals.      Approx. 1 cm
                          • The output terminals have positive (+: Red) and negative
                             (–: Black) polarity, and each speaker also has the same polarity (+ and –). When connecting the speaker,
                             be sure to connect the terminals with the same polarity (+ with +, – with –).
                          • When connecting just one speaker set, you can obtain better sounds quality by connecting to SYSTEM          Cut the          Peel off the        Twist
                             A.                                                                                                         corting of       edge of cable.      conductors.
OPERATION




                                                                                                                                        cable.
  BASIC




                                                                                                                                        • Wiring with speaker cable.
CONNECTION
 ADVANCED




                                                                                                                                                                                                2.   Turn on the power switch of the audio unit
                                                                                                                                                                                                     (amplifier, etc.) that is connected with this
                                                                                                                                                                                                     unit. Set the selector on the connected unit
                                                                                                                                        Turn counter-     Insert             Turn                    to this unit.
                                                                                                                                        clockwise to      conductor of       clockwise to       3.   Plug the power cable into an AC outlet.
REMOTE CONTROLLER




                                                                                                                                        loosen.           cable.             tighten.
   OPERATION




                                                                                                                                        Your speaker system must satisfy the below
                                                                                                                                        conditions. If it does not, the PM6003’s protective
                                                                                                                                        circuit will active, whereby preventing proper
                                                                                                                                        playback. In some cases, the amplifier and speakers
                                                                                                                                        may be damaged.
    TROUBLESHOOTING




                                                                                                                                        • If using 1 set of speakers, total speaker impedance
                                                                                                                                           must be 4 ohms or more.
                                                                                                                                        • If using 2 sets of speakers, total speaker
                                                                                                                                           impedance must be 8 ohms or more.
    OTHERS




                      8
                                                                                                                                                                                                                                                                                                                                                                           ENGLISH



   BASIC OPERATION




                                                                                                                                                                                                                                                                                                                                                                                     NAMES AND
                                                                                                                                                                                                                                                                                                                                                                                     FUNCTIONS
OPERATION PROCEDURES                                                                                                                                                                     RECORDER OPERATION
                             q                                                                                                                                                  w                                   A                                                                                                                                                  B




                                                                                                                                                                                                                                                                                                                                                                                     CONNECTIONS
                                                                       PHONO       TUNER      CD       AUX/DVD        1   RECORDER   2        MUTE                                                                                                            PHONO       TUNER      CD       AUX/DVD        1   RECORDER   2        MUTE




                                                                                                                                                                                                                                                                                                                                                                                        BASIC
                                                      INPUT SELECTOR                                                                                       VOLUME                                                                            INPUT SELECTOR                                                                                       VOLUME

                                                                              SOURCE DIRECT        A   SPEAKERS   B              LOUDNESS                                                                                                                            SOURCE DIRECT        A   SPEAKERS   B              LOUDNESS




                                                                       BASS                            TREBLE                                BALANCE                                                                                                          BASS                            TREBLE                                BALANCE
                                STANDBY                                                                                                                                                                                STANDBY                                                                                                                             MIN   MAX
                                                                                                                                                                    MIN   MAX

                              POWER ON/OFF                                                                                                                                                                           POWER ON/OFF
                                                                                                                                                                                                                                    PHONES
                                             PHONES




                                                                                                                                         L             R                                                                                                                                                                        L             R




                                                                                     e                                                                                                                                                                                      C




                                                                                                                                                                                                                                                                                                                                                                                     OPERATION
Operate each equipment to start play.                                                                                           TO LISTEN TO FM/AM BROADCASTS                            Control used for operating the tape deck.                                                                                     COPYING




                                                                                                                                                                                                                                                                                                                                                                                       BASIC
                                                                                                                      1.                     Set the INPUT SELECTOR switch q to                                                                                                                          You can copy between two recorders connected
  TO PLAY AN ANALOG DISC                                                                                                                     TUNER.                                        PLAYBACK                                                                                                      to PM6003.

1.   Set the INPUT SELECTOR switch q to                                                                               2.                     Tune in the desired station on the tuner.   1.   Set the INPUT SELECTOR switch A to                                                                             1.                     Select the program source RECORDER 1
                                                                                                                                                                                                                                                                                                                                    with the INPUT SELECTOR switch A.
     PHONO.                                                                                                           3.                     Adjust the volume with the VOLUME                RECORDER 1 (CD-R) or RECORDER 2 (MD/
2.                                                                                                                                                                                                                                                                                                           2.                     The RECORDER 1 signal can be recorded




                                                                                                                                                                                                                                                                                                                                                                                     CONNECTION
     Play a disc on the turntable.                                                                                                           control w and adjust the tone with the           TAPE).




                                                                                                                                                                                                                                                                                                                                                                                      ADVANCED
                                                                                                                                             BASS and TREBLE controls e.                 2.                                                                                                                                         onto RECORDER 2.
3.   Adjust the volume with the VOLUME                                                                                                                                                        Play a prerecorded disc or tape on the
     control w and adjust the tone with the                                                                                                                                                   recorder.                                                                                                      3.                     Operate the recorder connected RECORDER
     BASS and TREBLE controls e.                                                                                                                                                         3.   Adjust the volume with the VOLUME                                                                                                     2 to record the playback sound.
                                                                                                                                TO PLAY A CD                                                  control B.                                                                                                     4.                     The program source can be monitored
 Notes                                                                                                                                                                                   4.   Adjust the tone with the BASS and TREBLE                                                                                              through the speakers.
                                                                                                                      1.                     Set the INPUT SELECTOR switch q to CD.




                                                                                                                                                                                                                                                                                                                                                                                     REMOTE CONTROLLER
  • Set the VOLUME control to the minimum position                                                                                                                                            controls C.
                                                                                                                      2.                     Play a CD on the CD player.                                                                                                                                         Note




                                                                                                                                                                                                                                                                                                                                                                                        OPERATION
    before placing the stylus on the disc or before
    replacing the cartridge.                                                                                          3.                     Adjust the volume with the VOLUME                                                                                                                                       • You can copy between two recorders (RECORDER
  • Do not apply shock or vibration to the turntable                                                                                         control w and adjust the tone with the                                                                                                                                    1 and RECORDER 2) vice versa.
    during play, as this may cause the stylus to jump                                                                                        BASS and TREBLE controls e.
                                                                                                                                                                                           RECORDING
    and the analog disk to be damaged.                                                                                                                                                   The playback sound of a program source component,
  • If the turntable is installed too close to the                                                                                                                                       such as a turntable, a tuner, or a CD player, can be




                                                                                                                                                                                                                                                                                                                                                                                         TROUBLESHOOTING
    speakers, the volume may not be able to be                                                                                                                                           recorded on disc or tape as follows.
    increased to a high level due to howling.                                                                                   TO PLAY A DVD OR COMPONENT
                                                                                                                                                                                         1.   Set the program source component with
  • Do not switch the power OFF while the stylus is                                                                             CONNECTED TO AUX/DVD JACKS                                    the INPUT SELECTOR switch A.
    on the disc surface.                                                                                          The component connected to the AUX/DVD jacks
                                                                                                                  on the rear panel can be played as follows.
                                                                                                                                                                                         2.   Play the program source.
                                                                                                                                                                                         3.   Operate the recorder(s) to record the
                                                                                                                                                                                              playback sound on disc(s) or tape(s).
                                                                                                                      1.                     Set the INPUT SELECTOR switch q to
                                                                                                                                             AUX/DVD.




                                                                                                                                                                                                                                                                                                                                                                                         OTHERS
                                                                                                                      2.                     Play the component connected to the
                                                                                                                                             selected input.
                                                                                                                      3.                     Adjust the volume with the VOLUME
                                                                                                                                             control w and adjust the tone with the
                                                                                                                                             BASS and TREBLE controls e.




                                                                                                                                                                                                                                                                                                                                                                                     9
                           ENGLISH



                            ADVANCED CONNECTION
NAMES AND
FUNCTIONS




                           CONNECTING THE REMOTE CONTROL JACKS                                                                       REMOTE CONTROL SETTINGS

                                                                                                                                                                                                      PHONO       TUNER      CD       AUX/DVD        1   RECORDER   2        MUTE




                                                                                                                                                                                     INPUT SELECTOR                                                                                       VOLUME
                                                                                                                                                                                                             SOURCE DIRECT        A   SPEAKERS   B              LOUDNESS
CONNECTIONS




                                                                                                                                                                                                      BASS                            TREBLE                                BALANCE
                                                                                                                                                               STANDBY                                                                                                                             MIN   MAX

                                                                                                                                                             POWER ON/OFF
                                                                                                                                                                            PHONES
   BASIC




                                                                                                                                                                                                                                                                        L             R




                                                                                                                                                                                                                SPEAKERS A/B button

                                                                                                                                    1.   Press and hold the SPEAKER B button on the front panel more than 5 seconds.
                                                                                                                                    2.
OPERATION




                                                                                                                                         Front remote sensor is disabled and MUTE indicator blink 3 times.
  BASIC




                                                                                                                                    Note
                                                                    q                   w                                            • Be sure to set remote sensor enable when external infrared sensors or similar devises are not connected.
                                                                                                                                     • Otherwise the unit will be unable to receive remote control commands.
                                                                                                                                    3.   To restore the original setting, press and hold SPEAKER A button on the front panel more than
CONNECTION
 ADVANCED




                                                                                                                                         5 seconds.
                                                                                                                                    4.   Front remote sensor is enabled and RECORDER 2 indicator blink 3 times.
                                                          INPUT                                      OUTPUT
REMOTE CONTROLLER




                                                     IN    OUT
   OPERATION




                                                  REMOTE CONTROL                                               RC OUT
    TROUBLESHOOTING




                                                                                                             OPTION
                                                    CD player

                       q                                                     w
                       You can control other Marantz products through this   Whenever external infrared sensors or similar
                       unit with the remote controller by connecting the     devices are connected to Remote Control IN of
                       REMOTE CONTROL terminals on each unit.                the unit, be sure to always disable operation of the
                       The signal transmitted from the remote controller     infrared sensor on the unit by using the following
                       is received by the remote sensor on this unit. Then   procedure.
    OTHERS




                       the signal is sent to the connected device through
                       this terminal. Therefore you need to aim the remote
                       signal only to the unit.

                       Set the REMOTE CONTROL SWITCH on the back of
                       other units (not the PM6003) to “EXT”.(EXTERNAL)
                       to use this feature.




                      10
                                                                                                                                                                                                  ENGLISH



   REMOTE CONTROLLER OPERATION




                                                                                                                                                                                                                    NAMES AND
                                                                                                                                                                                                                    FUNCTIONS
  CD                                                  DVD                                                 TUNER                                               TAPE
When the CD button is pressed, the buttons in       When the DVD button is pressed, the buttons in      When the TUNER button is pressed, the buttons in    When the RECORDER 2 (TAPE) button is pressed,
group v function as indicated in the table below.   group v function as indicated in the table below.   group v function as indicated in the table below.   the buttons in group v function as indicated in the
These buttons can only be used when a Marantz CD    These buttons can only be used when a Marantz       These buttons can only be used when a Marantz       table below. These buttons can only be used when a
player is connected to the CD input jacks.          DVD player is connected to the AUX/DVD input        tuner is connected to the TUNER input jacks.        Marantz tape deck is connected to the RECORDER




                                                                                                                                                                                                                    CONNECTIONS
                                                    jacks.                                                                                                  2 (TAPE) jacks.




                                                                                                                                                                                                                       BASIC
 BUTTON NAME                FUNCTION                 BUTTON NAME                FUNCTION                 BUTTON NAME                FUNCTION                 BUTTON NAME                 FUNCTION
                    Skips to the start of the                           Skips to the start of the               4           Not for use                             4           Fast backward
        4                                                   4
                    current track                                       current track or chapter                ¢           Not for use                             ¢           Fast forward
        ¢           Skips to the next track                             Skips to the next track or               7                                                   7
                                                            ¢                                                               Not for use                                         Stops playback




                                                                                                                                                                                                                    OPERATION
         7          Stops playback                                      chapter
                                                                                                                 2                                                   2




                                                                                                                                                                                                                      BASIC
                                                                                                                            Not for use                                         Starts playback
         2          Starts playback                          7          Stops playback
                                                                                                                 8          Not for use                              8          Pauses a tape that's playing
         8          Pauses a disc that's playing             2          Starts playback
                                                                                                         P.SCAN/A.TUNE Starts preset scan                    P.SCAN/A.TUNE Not for use
 P.SCAN/A.TUNE Not for use                                   8          Pauses a disc that's playing
                                                                                                              MENU          Not for use                           MENU          Not for use
       MENU         Not for use                      P.SCAN/A.TUNE Not for use
                                                                                                             3/TUNE+        Tuning (frequency) increase         3/TUNE+         Not for use




                                                                                                                                                                                                                    CONNECTION
                                                          MENU          Displays a DVD disc menu




                                                                                                                                                                                                                     ADVANCED
     3/TUNE+        Not for use                                                                              4/TUNE-        Tuning (frequency) decrease          4/TUNE-        Not for use
     4/TUNE-        Not for use                          3/TUNE+        Move the cursor upward
                                                                                                            1/PRESET-       Preset stations forward feed        1/PRESET-       Not for use
    1/PRESET-       Not for use                          4/TUNE-        Move the cursor downward
                                                                                                                            Preset stations backward           2/PRESET+        Not for use
                                                        1/PRESET-       Move the cursor leftward            2/PRESET+
    2/PRESET+       Not for use                                                                                             feed                                  ENTER         Not for use
       ENTER        Not for use                         2/PRESET+       Move the cursor rightward             ENTER         Not for use                            CAT          Not for use




                                                                                                                                                                                                                    REMOTE CONTROLLER
        CAT         Not for use                                         Selects the current menu               CAT          Not for use
                                                          ENTER                                                                                                   BAND          Not for use
                                                                        option




                                                                                                                                                                                                                       OPERATION
       BAND         Not for use                                                                               BAND          Selects the band                        0-9         Not for use
                                                            CAT         Not for use
        0-9         Inputs the numeric                                                                          0-9         Inputs the numeric                    CLEAR         Resets counter
                                                          BAND          Not for use
       CLEAR        Not for use                                                                               CLEAR         Clears the inputting                  MEMO          Not for use
                                                            0-9         Inputs the numeric
       MEMO         Not for use                                                                                             Enters the tuner preset              DISPLAY        Not for use
                                                          CLEAR         Not for use                           MEMO
     DISPLAY        Not for use                                                                                             memory numbers




                                                                                                                                                                                                                        TROUBLESHOOTING
                                                          MEMO          Not for use                                                                                PTY          Not for use
        PTY         Not for use                                                                                             Selects the display mode in
                                                                                                             DISPLAY                                             F.DIRECT       Not for use
                                                                        Displays the disc playback                          RDS
     F.DIRECT       Not for use                          DISPLAY
                                                                        information                                         Displays the programme type          T.MODE         Not for use
     T.MODE         Selects the sound mode                  PTY         Not for use                            PTY          information of the current
                                                         F.DIRECT       Not for use                                         station
                                                         T.MODE         Not for use                                         Selects the "frequency direct
                                                                                                             F.DIRECT
                                                                                                                            input"




                                                                                                                                                                                                                        OTHERS
                                                                                                                            Selects the auto stereo mode
                                                                                                             T.MODE
                                                                                                                            or mono mode




                                                                                                                                                                                                               11
                           ENGLISH



                       REMOTE CONTROLLER OPERATION                                                              TROUBLESHOOTING
NAMES AND
FUNCTIONS




                                                     The remote control unit contains 3 sets of remote       In case of trouble or abnormal operation of the unit, check the following before contacting service personnel.
                           REMOTE CONTROL CODE       control codes, and it can be used to control up to      What may seem to be a serious malfunction is often the result of a simple operation mistake. If the trouble
                           SETTING                   3 amplifiers in one location. To control a second        persists after checking the following, please contact your dealer or nearest Marantz distributor.
                                                     or third amplifier, select the remote control code
                                                     as explained below. The selected amplifier can be        * The amplifier does not operate and the                  * Remote control operation is not possible.
CONNECTIONS




                                                     operated from the remote control.                         indicators do not light.                                1.   Is the remote controller's transmitter
                                                     • When the unit is shipped from the factory, the
   BASIC




                                                                                                              1.   Check to see if the power cable is inserted              pointed correctly at the remote sensor on
                                                       main unit and remote control are set to AMP1.
                                             z                                                                     properly into the power outlet.                          the front of the Amplifier?
                                                     1.   AMP2
                                                                                                                                                                            Or, is there an obstruction between the
                                                          To set the remote control to AMP2, hold
                                                                                                                                                                            transmitter and the remote sensor?
                                                          down both the AMP button z and 2 number            * The indicators light but the amplifier
                                                          button x on the remote control for at least          does not operate.                                       2.   Are the batteries in the remote controller
OPERATION




                                                          five seconds.                                                                                                      exhausted?
                                                                                                              1.   Check to see if the SELECTOR, SPEAKER
  BASIC




                                                          AMP3                                                                                                         3.   Is there another strong light (from a window,
                                                                                                                   switches and VOLUME control are properly
                                                          To set the remote control to AMP3, hold                                                                           etc.) striking the Amplifier remote sensor?
                                                                                                                   set.
                                                          down both the AMP button z and 3 number                                                                      4.   Is an RCA cord connected to the “REMOTE
                                                          button x on the remote control for at least                                                                       CONTROL OUT” jack on the Amplifier rear
                                                                                                             * Sound is heard from only one of the
                                                          five seconds.                                                                                                      panel?
                                                                                                               speakers.
CONNECTION




                                                     2.   Also set the main unit's remote control                                                                      5.   Is the remote control code different between
 ADVANCED




                                                          setting to the same setting as the remote           1.   Check to see if the BALANCE control is                   the main unit and remote controller?
                                                          control.                                                 properly set.
                                                                                                                                                                       6.   Is the main unit remote sensor disabled?
                                                     3.   To change main unit's remote control                2.   Switch the power of the unit to OFF, and
                                                          setting, hold down the AMP button z                      change the connections of the left and right
                                                          and press the DISPLAY button c on the                    speaker cords. If the sound from the same
REMOTE CONTROLLER




                                                          remote control; the remote control setting               speaker is still not heard, its connection
                                                          will be indicated by function indicators on              cord or the speaker itself may be defective.
   OPERATION




                                             x            the main unit and main unit setting will be
                                                          changed same setting as remote control.
                                                                                                             * Considerable hum noise is heard when
                                                     AMP1 : PHONO indicator blink 3 times.                     the turntable is played.
                                                     AMP2 : TUNER indicator blink 3 times.                    1.   Check to see if the plugs from the turntable
    TROUBLESHOOTING




                                                     AMP3 : CD indicator blink 3 times.                            are properly connected to the PHONO
                                                                                                                   jacks.
                                             c                                                                2.   Connect the grounding wire of the turntable
                                                      Note
                                                                                                                   to the GND terminal on the rear panel of
                                                       • If the main unit is unplugged the mains cord, the         this unit. If it has already been connected,
                                                         remote control setting will revert to AMP1.               try removing it.
                                                       • To set the remote control back to AMP1, hold
                                                                                                              3.   Check to make sure that the phono cartridge
                                                         down both the AMP button z and 1 number
                                                         button x on the remote control for at least five           is attached securely to the tonearm.
    OTHERS




                                                         seconds.                                             4.   Unplug the power cable and plug it in
                                                                                                                   again after inverting the orientation of the
                                                                                                                   blades.




                      12
                                                                                                                                                                                                                                                                                                                                                                         ENGLISH



    OTHERS




                                                                                                                                                                                                                                                                                                                                                                                        NAMES AND
                                                                                                                                                                                                                                                                                                                                                                                        FUNCTIONS
 SPECIFICATIONS                                                                                                                                       DIMENSIONS
RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels)                                                                                 (Unit: mm (in))
      ........................................................................................................................ 45 W x 2 (8 Ω load)




                                                                                                                                                                                                                                                                                                                           21.5 (7/8)
      ........................................................................................................................ 60 W x 2 (4 Ω load)




                                                                                                                                                                                                                                                                                                                                                                                        CONNECTIONS
Headphone rated output (When speaker rated output set to 8 Ω load) ................. 160mW (32 Ω load)




                                                                                                                                                                                                                                                                                                                                                                                           BASIC
Total harmonic distortion (1 kHz simultaneous drive of both channels, 8 Ω load) ................... 0.08 %
Output band width (8 Ω load, 0.08 %) ...............................................................................10 Hz – 50 kHz
Frequency response (CD, 1 W, 8 Ω load) .................................................... 10 Hz – 70 kHz +0 dB, -1 dB
Dumping factor (8 Ω load, 100 Hz – 10 kHz) .......................................................................................100




                                                                                                                                                                                                                                                                                                                                                                                        OPERATION
Input sensitivity/Input impedance




                                                                                                                                                                                                                                                                                                                                                                                          BASIC
        PHONO (MM)........................................................................................................... 2.2 mV/47 kΩ
        CD, LINE, TUNER, AUX/DVD, RECORDER ........................................................... 200 mV/20 kΩ




                                                                                                                                                                                                                                                                                                                            328.5 (12-15/16)
Maximum allowable PHONO input level (1 kHz)




                                                                                                                                                                                                                                                                                                                                               366 (14-7/16)
     MM .....................................................................................................................................100 mV
     RIAA deviation (20 Hz ~ 20 kHz) .......................................................................................±0.5 dB




                                                                                                                                                                                                                                                                                                                                                                                        CONNECTION
                                                                                                                                                                                                                                                                                                                                                                                         ADVANCED
S/N (IHF-A, 1 W, 8 Ω load)
       PHONO (MM).................................................................................................. 84 dB (5 mV input)
       CD, LINE, TUNER, AUX/DVD, RECORDER................................................ 87 dB (500 mV input)
Tone control
       Bass (100 Hz) ......................................................................................................................±10 dB




                                                                                                                                                                                                                                                                                                                                                                                        REMOTE CONTROLLER
       Treble (10 kHz) ....................................................................................................................±10 dB




                                                                                                                                                                                                                                                                                                                                                                                           OPERATION
Power requirement ...................................................................................................... AC 230 V 50/60 Hz
Power consumption (EN60065) ...................................................................................................... 150 W
Standby power consumption .......................................................................................................... 0.4 W




                                                                                                                                                                                                                                                                                                                          16 (11/16)




                                                                                                                                                                                                                                                                                                                                                                                            TROUBLESHOOTING
Specifications subject to change without prior notice.
                                                                                                                                                                                                                          440 (17-3/8)




                                                                                                                                                                                                                                                                                                                              90.5 (3-5/8)

                                                                                                                                                                                                                                                                                                                                                               105 (4-3/16)
                                                                                                                                                                                                                 PHONO       TUNER      CD       AUX/DVD        1   RECORDER   2        MUTE




                                                                                                                                                                                                INPUT SELECTOR                                                                                       VOLUME
                                                                                                                                                                                                                        SOURCE DIRECT        A   SPEAKERS   B              LOUDNESS




                                                                                                                                                                                                                 BASS                            TREBLE                                BALANCE
                                                                                                                                                                          STANDBY                                                                                                                             MIN   MAX

                                                                                                                                                                        POWER ON/OFF




                                                                                                                                                                                                                                                                                                                                                                                            OTHERS
                                                                                                                                                                                       PHONES




                                                                                                                                                                                                                                                                                   L             R




                                                                                                                                                                                                                                                                                                                              14.5 (5/8)
                                                                                                                                                      Weight : 7.5 kg


                                                                                                                                                                                                                                                                                                                                                                                   13
                           ENGLISH



                       OTHERS
NAMES AND
FUNCTIONS




                           CLEANING OF EQUIPMENT                                  REPAIRS
                           EXTERNAL SURFACES                                      Only the most competent and qualified service
                       The exterior finish of your unit will last indefinitely      technicians should be allowed to service the
                       with proper care and cleaning, Never use scouring          factory-trained warranty station personnel have
CONNECTIONS




                       pads, steel wool, scourging powders or harsh               the knowledge and special facilities needed for
                                                                                  repair and calibration of this precision equipment.
   BASIC




                       chemical agents (e.g., lye solution), alcohol, thinner,
                       benzine, insecticide or other volatile substances          After the warranty period has expired, repairs will
                       as these will mar the finish of the equipment.             be performed for a charge if the equipment can be
                       Likewise, never use cloths containing chemical             returned to normal operation.
                       substances. If the equipment get dirty, wipe the           In the event of difficulty, refer to your dealer or write
                       external surfaces with a soft, lint-free cloth.            directly to the nearest location to you that is listed
                       If the equipment becomes heavily soiled:                   on the Marantz Authorized Service Station list. If
OPERATION




                                                                                  writing, please include the model and serial number
  BASIC




                       • dilute some washing up liquid in water, in a ratio       of the equipment together with a full description of
                           of one part detergent to six parts water.
                                                                                  what you think is abnormal about the equipment's
                       • dip a soft, lint free in the solution and wring the it   behavior.
                           is damp.
                       • wipe the equipment with the damp cloth.
                       • dry the equipment by wiping it with a dry cloth.
CONNECTION
 ADVANCED
REMOTE CONTROLLER
   OPERATION




                           USING HEADPHONES
    TROUBLESHOOTING




                       If the volume in the headphones is too high, it may
                       injure your ears. Do not set the sound volume too
                       high.
    OTHERS




                      14
                                     www.marantz.com
                   You can find your nearest authorized distributor or dealer on our website.


                                                            is a registered trademark.



Printed in China                                                                                04/2009 541110277031M mzh-d

								
To top