Docstoc

affordable

Document Sample
affordable Powered By Docstoc
					Body
I 'm a plumber by trade. You need to cut a 18"- wide ditch put 6"- of
1-1/2" gravel below the pipe, 6"- above it then use straw to cover
the gravel and a sandy loam finish.This is the proper way to install the system.

Tommy
Affordable Tractor Sales Co
Bellville,Texas


We stock thousands of parts for the Jinma, farm pro,agracat tractors,look us
up on the web,not all parts are listed so call if you don't see what you need

www.affordabletractorsalesco.com

Tommy

We are not far from you and stock hundreds of parts for these tractors please
call or e-mail us.Chip is a great guy/dealer and we try to help where we can

Tommy
Affordable Tractor sales
979-865-4002
713-464-5521
I have the manuals and could copy one for you,for the cost of these units why
would you want to build one???We have several of these woodchippers and
other than you just wanting something to do it would be more cost effective to
buy it today and be chipping tommorro???? Either way let meknow if I can help
you

Tommy
Affordable Tractor sales
Bellville,Texas

Doug we have the clutch assemblies and the bearing in stock
I have posted a link to our website,e-mail me for more information

Tommy
Spray some WD-40 where the shaft that the handle goes on comes out of the
creeper gear,it will dry out and get very stiff,also check the oil in the creeper
assembly.This fix's it most of the time

Tommy
Affordable Tractor Sales
We stock and sell the manuals for the Jinma/Agracat tractors
as well as a large selection of replacement parts,check out our link

Tommy
Affordable Tractor
Bellville,Texas
Tractor Outlet is a great company,you may want to check with them on delivery
times the westcoast port backlogs,customs and epa,homeland security
delays.
Check with them to see if any of these delays are affecting them,they also
provide great after sale support

Tommy
Affordable Tractor

We have just recieved confirmation that we will recieve EPA approved engines
in our order of 300 series Jinma Y-395 Tractors,which is due in the USA at the
end of January.We are hoping that the Y-385 engine is not far behind.We
knew that they had the certification and just was not sure when they would be
putting them in the tractors,this engine is a up charge but with all the
EPA/customs problems it will be well worth the difference.We will keep you
posted on the changes and how they engines run once we recieve them<br>
<br>
Tommy<br>
Affordable Tractor Sales <br>

I believe that model # is a Jinma 304 Tractor,we have a large selection of
Jinma Parts in Stock,please visit our webpage if the part you need is not listed
we have hundreds that have not been added yet so call us

Tommy
Affordable Tractor Sales
Bellville,texas 77418
We have the 90's in stock if you want to replace it,it is most likly a sand pit from
the casting. We sell them for $ 35.00 plus shipping.Let mw know if we can
help you

Tommy
Affordable Tractor Sales
Do as Greg has suggested ,if you have no fuel coming out of the pump you will
have to replace it.We have the pumps in stock,while they are not hard to
replace,timing is alot more sensitive and we can walk you thru that.Let us know
how it goes

Tommy
Affordable Tractor Sales

Chip ,we are all on here to try and help each other with
questions,problems,ect.I have learned a few things myself on this board.You
know that I only want to sell a injector pump if he needs it,hopefully he does
not.I appreciate all the input from you,JohnS,Greg_g .Greg_g is a wealth of
information and is normally &quot;Johnny on the Spot&quot; answering alot of
questions,we have a buisness to run and sometimes don't have the time to
reply,good job Greg_g thanks for your help.So don't ever worry about messing
up a sale for me,lets just try to get the tractor going for him.

Tommy
Affordable Tractor Sales
Ray,don't jump the gun just yet,if you do need parts we have them including
crankshafts,bearings,and a complete motor if needed.Lets try and help you fix
it.We have had starters that tested out good but were bad,hydraulic pumps
could cause it .clutch not completly dis engaged,can you spin the motor over
freely with the de-compression lever held open.I have been working on these
tractors for years and have only replaced one complete motor due to the block
had water in it and during shipping froze and cracked,call me if you would like
to discuss,or answer on here

Tommy
Affordable Tractor Sales
NAPA has a metric kit that includes the gauge,tubing, fitting for under $ 20.00,I
have bought them before I just don't have the part #.Gauge fits the same hole
as the factory one,

Tommy
Affordable Tractor Sales
Rays problem was rod bearing due to running engine out of oil,you will have to
start by seeing if you can put a socket on the crankshaft to see if the engine
turns over,if yes it could be a more minor problem,if no you will need to drop
the oil pan to inspect the rod bearing,did you run low or out of oil ?keep me
posted

Tommy
Affordable Tractor Sales
We have just about any part you need,do as Greg said on the jumper wire.If
thats it I recommend you replace it.If that does not do it jump the starter across
with a screwdriver to see if it turmns over

Tommy
Affordable Tractor Sales
We are one of the largest parts suppliers for Jinma,let us know if we can help
you with anything

Tommy
Affordable Tractor Sales
We have them in stock, give me a call or e-mail,shipping to Ga. should not be
too bad from Texas

Tommy
Affordable Tractor Sales

We do have all the replacement parts in stock also
Thanks for the kind words,we try to do all we can to help and appreciate all the
buiness in return

Tommy
Affordable Tractor Sales
The TPEM is for 1-engine family only,be careful as we have had all of our
containers checked by the EPA,Nelson has had some dealings with them also
and knows what they are looking for,I would not play with fire it burns.All
dealers can get the 28 hp non-epa this is nothing special,with the
demerage,delays,and other related problems why would you?,90% of the
customers could not show me the 3hp difference in what they would be using
the tractor for,the epa version starts faster ,runs smoother.You just bump the
key on the 354 and it's running.I highly recommend the EPA version to anyone
looking<br>
<br>
Tommy<br>
Affordable Tractor Sales

If you end up needing a starter, solenoid look us up.We have them in
stock.Jump the starter with a screwdriver from the hot post to the solenoid and
see if it spins over, if not you have a starter problem, that by pass's the switch,
clutch interlock ,ect. make sure the tractor is in neutral first.

Tommy
Affordable Tractor Sales
I don't know if you bought the kit from us or not, but the W o-ring is larger when
it's new,as it wears in it get's flat.I suggest you install the kit and just snug up
the 2- bolts that hold the pump together so the shaft will still turn until you get it
installed.Start the tractor up let it run a few min. then tighten the bolts up.It
should seat the W o-rings. Since the o-rings are thicker they are compressing
the floating sleeves.Try it and let us know.We have been selling those kits for
years with no problems.The same kit is used on the steering pump,hydraulic
pump,backhoe pump.

Tommy
Affordable Tractor Sales
Let me give you a dealers view,Jinmas are a great tractor value for the money,
most of the problems with a Jinma come from poor assembly, not draining and
flushing out all the original fluids, checking timing and clutch adjustments.If the
dealer has done all of the above it will stop alot of the small issuses about the
tractor.They are a hands on tractor ,small items here and there.Some owners
have had no problems at all. Also make sure if you are getting a warranty that
the selling dealer has some parts support in the event you need something you
don't have to wait to get it from China.See if the tractor has some of the
upgraded items ,Spring seat,Shuttle shift, 1-piece instrument panel,rocker
switchs, ect.The Chinese loaders are OK for the money, I like Koyker loaders
alot and they don't cost that much more you get added lift capacity of about
500lbs, float, Quality joystick valve,60&quot; bucket,We have been selling
them since 2001 and have a hard time keeping them in stock, we also are a
large parts supplier for Jinma in the USA.Hopefully this helps in your decision
making, they are not John Deeres, New Hollands, Kubotas but will work as
hard if not harder for about 1/2 the money.<br>
<br>
Tommy<br>
Affordable Tractor Sales
Great, glad you got it going,the good things about these message boards is
everybody is willing to help.These tractors are very easy to fix and with parts
avaliable theres not much reason to spend thousands more for a big
three.Please let us know if we can help you with anything else or parts,we
have hundreds in stock with repair kits for all the pumps,cylinders,ect.

Tommy
Affordable Tractor Sales


Bob, that means US made Front end loader,alot better quality than the
chinese, more lift capacity, float,
and about a $ 1,000.00 more than the chinese loader, I also think it's worth the
extra
Tommy
Affordable Tractor Sales Co.
We have the handles in stock,when you removed the pin
it has slipped inside,if you cannot get it back with some plyers you may have to
remove the hydraulic lift box.
Let me know if we can help.our web page is down today for maint. but you can
call us a 979-865-4002

Tommy
Affordable Tractor Sales Co.
It's not a real big job to pull the hydraulic lift box off to fix it, you could do as you
say but I think it would be easier to pull the box.Either way let me know if we
can help you

Tommy
WTracy,I'm normally around you can e-mail me or call me, if you have any
question that I may be able to help you with.If you feel the need we can start a
new post,I'm not a expert on anything but I'm willing to share any ideas that I
may have.

Tommy
Affordable Tractor Sales
They are threaded in No Nuts

Tommy
That is the relief valve for the loader,if you did not count the turns to remove it,
you may have to re-adjust it lifting pressure, as you may notice it does not pick
up as much as it used to.

Tommy
Affordable Tractor Sales
On the rear work light if you hook both the wires together the work light will
shine brighter,like a high and low beam, with just 1-wire connected it's dim with
both it's bright

Tommy
Affordable Tractor Sales
On the tail lights, check the switch ,and fuses, the old style switchs were not
very good also if it's the pull out type of switch it has a fuse on the switch,check
that.

Tommy
Affordable Tractor Sales
AlanS, we have sold over a hundred of these woodchippers, I can get you
some phone numbers of customers that just love them.
Tommy
Affordable Tractor Sales

If you have the new style fuse box, it has a plug in horn relay,plug in voltage
regulator,plug in flasher. They do not look like the old style.You will have 3-
1&quot; black square plastic plug ins, and one silver plug in thats longer(thats
the voltage regulator)I don't have the part # at home for the flasher.If you have
the old style it will be a round silver cap with 2-wires going to it near the fuse
box.

Tommy
Affordable Tractor Sales
I will try to get you a pic of it,I think that it's electronic, it does not make the
clicking sound like the old ones.I'm not a electrical Guru,so maybe somebody
can tell from the pic when I send it

Tommy
Affordable Tractor Sales
Rodger if you will send me your e-mail address I will e-mail you a list of cross
over numbers, most filters can be purchased from a local auto supply, or a
Jinma dealer

Tommy
Affordable Tractor Sales
Here is a list of the common cross over filters for Jinma




Description Chinese # Engine TY380 2 & 3 cyl Chinese # Engine TY 290,
TY385 2 & 3 cyl Chinese # Rhino Engine 344 Chinese # Engine TY395
 vendor part # vendor part # vendor part # vendor part # vendor part #
Oil Filter 20mm JXD706P Napa 1626/FIL1381 JXD706P Napa 1626/FIL1381

Oil Filter 20mm JXD706P FRAM PH3935/PH3985 JXD706P FRAN
PH3935/PH3985 FRAN PH 2842 ? Motorcraft FL-1A
Oil Filter 20mm JXD706P AC PF970C JDX706P AC PF970C
Oil Filter 20mm JXD706P WIX 51381 JDX706P WIX 51381
Oil Filter 3/4 JXD707P Napa 1516 JXD707P Napa 1516
Air Filter 385T-1-1500 Napa FIL2276 385T-1-1-1500 Napa FIL2276

Air Filter 385T-1-1500 Purolator A42019 385T-1-1-1500 Purolator A42019

Air Filter 385T-1-1500 WIX 42276 385T-1-1-1500 WIX 42276



Fuel Filter CXD706 Napa 3195 CXD706 Napa 3195           ? Napa 3195
Fuel Filter CXD706 FRAM P6503 CXD706 FRAN P6503
Fuel Filter CXD706 AC TP1247 CXD706 AC TP1247
Fuel Filter CXD706 WIX 33195 CXD706 WIX 33195
Battery Napa 7237 Napa 7237
Starter QD100C3 QD100C3
AC Generator 2JF200 GM Alt 12 SI 2JF200 GM Alt 12 SI
Bulb, tail 160.48.022-A Napa 1176 160.48.022-A Napa 1176
Bulb,directional 160.48.033 Napa 1156 160.48.033 Napa 1156
Head Lamp 160.48.021
You can get the pieces made at a muffler shop, turn the exhaust 90 down,they
can make a new piece that will bend under the floorboard ,weld a flange back
on the re-mount the muffler with a hanger. We have had a local muffler shop
do some for us it cost about $ 80.00

Tommy
Affordable Tractor Sales
It could be bypassing in the steering cylinder,we have a re build kit or a
replacment steering cylinder, from the pic's you sent me it looks like you have
a Y380 engine single pump,with a 300 series Jinma lift box. This is a newer
version of the Agracat when they were trying to get away from Jinma.We have
a lift box on our Jinmas thats real similier to what you have,the rest of the set
up is close to the 200 series Jinmas.I think that the problem is either in the
diverter valve or the cylinder

Tommy
Affordable Tractor Sales
Edwin, if you can get that tractor for about $ 4,000.00 cash after your bartering
I think that would be a fair to good deal, these tractors are great if you don't
mind turning a wrench every now and then, parts are no problem we have a
large supply as well as a few other larger dealers.They are simple little
machines that will work hard for you at a reasonable price. There are several
message boards with plenty of members to help you out with any questions or
concerns. Good luck on your purchase

Tommy
Affordable Tractor Sales

Edwin, the ones you see on E-bay do not have Koyker loaders,you can put a
ZL-20 chinese loader on for less.The Koyker is the way to go.$ 7,000.00 for a
tractor with a good loader is a good buy,about a 3,000 saving off of retail.
These tractors have not changed much other than cosmetics,shuttle shift,1-
piece gauges,rounded fiberglass fenders, 1-piece flip up hoods.For what you
are going to be using the tractor for it should serve you well.We have a hard
time keeping them in stock at the retail price,and used ones or trade in's don't
last but a few weeks at best.

Tommy
Affordable Tractor Sales
We just recieved some of these new Korean backhoes,and all I can say is
WOW.Being a Jinma dealer when we first started I brought in several
containers of the Chinese backhoes,while the are cheap we had lots of
problems and complaints most customers either loved them or hated them.In
the past few years I just quit selling them we could not get parts,leaks and I
just tryed to get the customers to buy the Koykers,Woods,ect. but the cost was
alot higher.These new backhoes are very impressive,swedish valves,powder
coated paint,large pad out riggers,Frame Mount if you want,JIC fittings,quality
hoses,plumb off the tractor hydraulics or you can get the PTO pump and tank
with it.The cost is more than the chinese but less than the Koykers,but the
quality guys is .If you are serious about purchasing a backhoe with your tractor
please take a look at these,they are only sold thru chinaimporters dealers,I had
one in the back of me truck yesterday taking it to a customer going down I-10
and had several thumbs up from passing cars.I only brought in a few to see the
product first,I could not wait to get my order in for more.If you would like to see
pics go to www.chinaimporters.com website and click on backhoe.They are
avaliable in 2- sizes 6'-6&quot; BH6600 and the 7'6&quot;BH7600 they do not
recommend the BH7600 for the 200 series Jinmas but you can put the
BH6600 on either.Please e-mail me with any questions <br>
<br>
You can hook and unhook in 10 min.or less,the pump is a pto,and slids on and off with ease,call me or e-mail for pricing 979-86

Philip,I tryed to e-mail you back and it bounced,do you have a different e-mail

Tommy
Affordable Tractor Sales
Mike,let me know if you get the right one,they had the new style not the old,I
talked to Chip and Cris ,the one they had was a 284 unless he got some in

Tommy
Affordable Tractor Sakles
We just recieved a new load of the woodchippers in , if we can help you let me
know

Tommy
Affordable Tractor Sales

Sounds like the shift lump, has came out or broke.You will need to remove the
lift box to repair/replace it.Its not a hard job let me know if you have any
questions or need the replacement parts

Tommy
Affordable Tractor Sales


If everything on the inside is working properly, it has to be your PTO clutch
disc.,either out of adjustment or it needs to be replaced.If you are going to test
your PTO do not use your hand, we use a 2x4 and hold it against it while
engaged.Let me know if we can help you with adjustment or parts

Tommy
Affordable Tractor Sales
If you want to give me a call on Monday,I will try to help you resolve the
problem,
Tommy
Affordable Tractor Sales
You also should try spraying some WD 40 where the shaft comes out of the
case,but Greg is correct alot of time you have to move the tractor a little to
Engage/Disengage.

Tommy
Affordable Tractor Sales
Edwin,your front mounts are for the dropped battery box,you needed the old
style front brackets that are straiught accross,you should be able to make
spacers for the ones you have ,on the rear brackets,you have to change them
to a different one that has the ears on both sides,if you don't feel like making
them we have them.

Tommy
Affordable Tractor Sales

I can take you a pic,but not until Monday I don't have my camera with me

Tommy
Affordable Tractor Sales
You should have a short rubber hose coming off the back of the hydraulic
pump that has a quick connect on it,un hook the quick connect the pressure
side is the quick connect closest to the pump,go into the bottom of the joystick
valve,the return will come out of the joysick valve back to the other end of the
quick connect you took loose,that should be all the plumbing you have to do.

Tommy
Affordable Tractor Sales
We have the balls,you also need to make sure the snap ring is still on
there,most of the time the snap ring breaks which allows the balls to fall
out.Call us at 979-865-4002 for the parts

Tommy
Affordable Tractor Sales
We stock the replacement hoses if you would like to purchase one,you can
contact Jerry at 979-865-4002 or see if you can track one down at the auto
supply.

Tommy
Affordable Tractor Sales

Sounds like you have a bad key switch,if you need one please give us a call

Tommy
Affordable Tractor Sales
979-865-4002

We do not have the fittings in stock,I have some on a order due in about 30
days.I have had a hard time locating them in the USA,so I told the factory to
send me 50-each to make up hoses with.I will keep you posted if I get them.

Tommy
Affordable Tractor Sales
We have a online website that has 30 % of the common items on it, we have
hundreds of other parts not listed yet but in stock.

You can call Jerry at 979-865-4002, we have manuals if needed, or visit our
website www.affordabletractorsalesco.com

Thanks Tommy
We have been selling the Jinma chippers for years with little or no
problems.The only problem with them has been the feed knuckle ($18.00) or
the feed belt ( $14.00)So if you can save $ 2,000-3,000 dollars and replace
these parts if they broke? That would still be a bargain.We have some
customers that have done nothing but run them.If you want to buy a
competitive 6&quot; woodchipper witha feed roller for $ 1,600.00 plus shipping
look hard at the Jinmas.We also keep all the replacement parts in stock .

Tommy
Affordable Tractor Sales
Bellville,Texas 77418
I wanted to wish all the members a Merry Christmas and a Happy New Year
from all of us at Affordable Tractor Sales. We want to thank all of you for
helping to make our year a successful one,we could not have done it without
your support<br>
<br>
<br>
Tommy, Mack, Jerry<br>
<br>
Affordable Tractor Sales Co.<br>
Bellville,Texas

Mike, I don't know of any one up there, however if you find a diesel mechanic
he can work on it.We have a large selection of parts including engine parts and
complete engines.We can get you any parts you or your mechanic may need

Tommy
Affordable Tractor Sales
What part do you need ,we keep some and have a source for more

Tommy
Affordable Tractor Sales
979-865-4002
Tony,we do not have crank kits but we do have all the parts you will need.Let
me know if we can help

Tommy
Affordable Tractor Sales
979-865-4002
Check your bulb sockets at the rear of the tractor,

Tommy
Affordable Tractor Sales
We have one of the largest Jinma parts supplies in the USA,check our website
or give us a call.
www.affordabletractorsalesco.com


Tommy
Sounds like the shift lump jumped out of the spline sleeve or broke,do you
have a parts book ?

www.affordabletractorsalesco.com

Tommy
Affordable Tractor Sales
While Greg G does not refer us much we have whatever parts you may
need,Not knocking Ryan he's a great guy too.

Tommy
Affordable Tractor Sales
www.affordabletractorsalesco.com
While Greg G does not refer us much we have whatever parts you may
need,Not knocking Ryan he's a great guy too.

Tommy
Affordable Tractor Sales
979-865-4002
Yes I know what parts you need,there are 2-different size oil seals,1-felt
washer,1-gasket. If you send me a e-mail I will try to explain to you how to
make the repair,
tommy@affordabletractorsalesco.com

Or you can call me at 979-865-4002

Thanks Tommy
Affordable Tractor Sales
I love fishing in Canada, Walleye and Pike.

Tommy
Affordable Tractor Sales
Does your tractor have power steering ? Is the steering working ok ? If it is the
hydraulic pump is working,it could be a couple of different things causing your
problems,the lift valve or the piston in the lift box.I have a feeling it's your valve
if your power steering is working.You can give us a call 979-865-4002 and we
will try to help you solve this problem

Tommy
Affordable Tractor Sales
&quot;Your Jinma Parts Superstore&quot;
On the backside of the loader valve are 2-caps with 2- screws in each one,
remove the 2-screws and confirm that everything is tight underneath them, if it
is I would look at the relief valve on your loader valve.

Tommy
Affordable Tractor Sales
On all the 200 series Jinmas you push down on the differential lock to engage
it not pull up

Tommy
Affordable Tractor Sales
Yes we have the solenoids,sorry for the late response,I don't check this board
as much as some of the others.<br>
<br>
We should have any parts you will every need for your tractor,it's the same as
the Jinma 200 series<br>
<br>
Thanks<br>
Tommy<br>
<br>
<br>
<br>
Moderator edited to remove the advertising content.
If you have a leak in one of the suction lines air will cause the same
problem,check all your lines,is the hyraulic fluid clear ? does it have any foam
in it ?<br>
<br>
Tommy<br>
<br>
<br>
<br>
Moderator edited to remove the advertising content.
Rich, thanks for the positive comments, thats why I do not check this board
much,

Tommy
Affordable Tractor Sales
I understand that you do not want Advertising on this site with out getting paid
for it,I listed my Website address that's all in the post,The chinese tractor
owners need more help than the typical Big 3 owners, they also need a source
for tech. info and parts that is a little harder to come by than the more common
brands.


Tommy
Affordable Tractor Sales
We have the replacement switchs,you will have to Google us can't post our
information on here

Tommy
Affordable Tractor Sales
Bellville,Texas

We are open 8-5 M-F and Sat until 1pm

Tommy
Affordable Tractor Sales
Not sure ?, I'm sure I can but don't think I ever have one
that I know of

Tommy
affordable has posted a new photo.

Subject: Jinma Pic.

Description: <br>Affordable Tractor Sales
affordable has posted a new photo.

Subject: Building.

Description: <br>Affordable Tractor Sales
Tom,we do have the parts in stock,we have been busy the last few months
with everybody getting there tractors ready,gardens ready,ect.Sorry for not
calling back we try to take care of everybody that calls in,we have the parts
seperate and as a assembly,if you want to send me a PM I will give you
pricing,or send me a e-mail

tommy@affordabletractorsalesco.com

We will be glad to help you

Tommy
This is the part that bolts to the tractor,then you have the operation rod and
handle,these parts are also listed on my website search differential and it will
bring up the parts<br>
<br>
Tommy
Speaking of Model airplanes,I have a few that I want to get rid of,2- of them are
Piper Cubs, 1- has a horizonal
twin cylinder engine,

Tommy
We have the manual in hard copy,but not electronic

Tommy
Affordable Tractor Sales
The hose should work for you,we don't spend much time on this board
because most of the post get edited by the moderators

We have one of the largest Jinma parts inventories in the USA which covers
your Agracat tractor also,just look at our website,or give us a call we will be
glad to help you

Tommy
Affordable Tractor Sales
It's really not a big deal guy's, I drop in from time to time to offer what I
can,there are alot of dealers here paying for ads, and I don't, but the Chinese
Tractor owners don't have hundreds of dealers supporting them only a few
(very few) ,and there is not enough activity on the Chinese Tractor owners
section of this site to pay for advertising, I'm not a free loader and do pay for
advertising just not on here<br>
because it would not cover the costs<br>
<br>
Tommy<br>
Affordable Tractor Sales<br>


kthompson,we have talked before about this same subject I have sent Dennis
at least 2-3 e-mails with no response,Im a paying member on several chinese
message boards including TBN this one just does not have enough chinese
tractor activity to pay for advertising here,it's not a big deal I drop in and see
whats going on from time to time,and I understand the moderators point on
spam,I'm not a spammer I offer advise FREE to the customer in hopes when
they do need something they will call us which includes my webpage address
and maybe phone number. The chinese tractor owner does not have the same
resources for service and parts as the bigger brands,the members on this
board are not getting much from this site if they can't get help or answers and
will quit posting here because of that,so who wins ? Nobody

Tommy
Affordable Tractor Sales

Murf Yes I do, no denying that,I think the intent of this board was to help all
tractor owners with problems,and it does require moderators but what
happened to good old &quot;Common Sense&quot; ? Do you notice the limited
activity in this section of the Discussion board? Ever Wonder why ?

Tommy
Affordable Tractor Sales
se,call me or e-mail for pricing 979-865-4002

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:334
posted:1/30/2011
language:English
pages:23