Docstoc

BUBBLE BUSTER - Air Bubble Remover

Document Sample
BUBBLE BUSTER - Air Bubble Remover Powered By Docstoc
					          BUBBLE BUSTER - Air Bubble Remover

The BUBBLE BUSTER has been engineered to efficiently eliminate air bubbles trapped
between polymer printing plates and applied double-sided sticky tape. The ergonomic
design reduces strain on the operator. The needle roller pierces any air bubbles while the
solid roller that follows flattens the pierced bubbles. The rolling motion should be
performed in a rapid movement over the plates.

Warning : 1. To retain the integrity of the needles DO NOT roll the BUBBLE
             BUSTER over any hard surface outside the area of the plates.
          2. Do not drop the roller as this may damage the needles and/or other
             components, reducing or disabling its function.
Bubble Buster - the air bubble remover for flexographic plates.

This revolutionary product has been engineered to efficiently eliminate air
bubbles trapped between polymer printing plates and applied double-
sided sticky tape. The multi needle rollers pierce any air bubbles while the
solid roller that follows flattens the pierced bubbles. The rolling motion
should be performed in a rapid movement over the plates for best results.

“We don’t have a problem with air bubbles” is a comment we heard from a
large flexographic printer early on. After discussions about the product
they decided to give it a trial – they were going to give 1 sample to 1
operator for a day and see what happened. The results were amazing.
They hadn’t even realized that they were spending so long piercing air
bubbles from the tape. All the other people in the department were so
impressed by the functionality, simplicity and effectiveness of the product
that they demanded a unit for each of them and also recommended the
product to their tape supplier.

Can this product really save your business valuable man hours ? Does it
really work ? We are proud to include Visy Industries and Amcor among
our happy customers. The time saving is a cost cutter for users of the
product – a plate that may have taken 30 minutes to remove the bubbles
can be completely flattened in a minute or 2. Conventional heavy rollers
were also quick but if the tape was left for any length of time, the bubbles
would re-appear – this does not happen with Bubble Buster.

What about the operators ? Are they happy using the product ? The
ergonomic design reduces strain on the operator – the knob is comfortable
to hold and the whole unit is lightweight yet sturdy. One of the first sites to
use the product doubled it’s order when the first batch were delivered
because the staff who did not get issued with the Bubble Buster were so
disappointed. Each customer who has bought the product treats the
Bubble Buster with pride of place that you would expect for a more
expensive tool.

Patents are pending for the product which was proudly designed and is
produced in Australia.

				
DOCUMENT INFO