VIEWS: 245 PAGES: 4 POSTED ON: 1/26/2011
Page 1 of 4 Print Date 10/31/2003 MSDS Document Product ETP Gold Cutting Fluid 1. Chemical Product and Company Identification Trade Name of this Product ETP Gold Cutting Fluid MSDS ID 91010 Manufacturer Contact Name Lawson Products, Inc. Corporate Compliance Team 1666 East Touhy Avenue Phone Number Des Plaines, IL 60018 (847) 827-9666 Emergency Phone (888) 426-4851 Revision Date 10/19/2001 Fire: 3 1 Health: Health: Reactivity: Fire: 1 3 1 Reactivity: 1 Specific Specific 2. Composition and Information on Ingredients Ingredient CAS Number Weight % ACGIH TLV PEL STEL Polyalkylene Glycol 9038-95-3 40-65 % Triethanolamine I 102-71-6 23.0 % Polyether Phosphate 67989-06-4 0-10 % Diethanolamine 111-42-2 2.0 % 3. Hazard Identification Synergistic Products N/A Irritancy Of Product Moderate eye irritant. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE None Known Page 2 of 4 Print Date 10/31/2003 MSDS ID 91010 ETP Gold Cutting Fluid EFFECTS OF OVEREXPOSURE Lack of consciousness, coma. Symptoms of Exposure: Dizziness, headache, nausea, lack of coordination. Route Of Entry Inhalation Eyes Skin 4. First Aid Information EMERGENCY AND FIRST AID PROCEDURES Inhalation: Remove to fresh air. Ingestion: Seek medical advice. Skin contact: Wash with soap and water. Eye contact: Flush with water and consult a physician. 5. Fire Fighting Measures Flash Point 200 FP Method Tag Closed Cup Extinguishing Media Foam Carbon Dioxide Dry Chemical 6. Accidental Release Measures Material Release Or Spill Remove all sources of ignition, ventilate. Avoid breathing vapors and remove with inert absorbent. 7. Handling and Storage Handling Precautions N/A Storage Store in a cool, dry place away from heat and open flame. Keep out of reach of children Other Precautions All ingredients marked with an (@) symbol are toxic chemicals subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act (SARA) of 1986 and 40CFRPart372. Handling Precautions And Equipment Read and follow contents on product label. Do not store in temperatures above 120 F. Hygienic Practices Wash hands before eating or using the washroom. Smoke in SMOKING AREAS ONLY. 8. Exposure Controls and Personal Protection Other Protective Equipment Eye wash station and safety showers should be available. Page 3 of 4 Print Date 10/31/2003 MSDS ID 91010 ETP Gold Cutting Fluid Eye Protection Use safety eyewear designed to protect against splash of liquids. Clothing Impermeable clothing should be used to prevent excessive skin contact. Other PPE N/A Protective Gloves Required for prolonged or repeated contact. Ventilation If current ventilation practices are not adequate in maintaining airborne concentrations below the established exposure limits, additional ventilation or exhaust systems may be required. Respiratory Protection If airborne concentrations exceed recommended exposure limits, a suitable NIOSH respirator should be worn. 9. Physical and Chemical Properties Physical State Liquid Specific Gravity 1.04 pH N/A Boiling/Cond. Point 374.0 ODOR AND APPEARANCE Not Currently Available. 10. Stability and Reactivity Incompatibility None Known. Conditions To Avoid Pressurized containers may rupture above 120 F. Hazardous Decomposition Products Oxides of carbon and nitrogen. Hazardous Polymerization Will not occur. 11. Toxicological Information Carcinogenicity None of the components in this chemical are listed by IARC, NTP or OSHA as a carcinogen. Page 4 of 4 Print Date 10/31/2003 MSDS ID 91010 ETP Gold Cutting Fluid 12. Ecological Information Ecological Information No information available. 13. Disposal Considerations Waste Disposal Method Must be in accordance with applicable laws and regulations. 14. Transportation Information OSHA CLASS N/A PER DOT N/A DOT Class N/A PER IMCO N/A IMCO Classification Number N/A IATA Classification Number N/A 15. Regulatory Information CPR Certification This product has been classified in accordance with the hazard criteria of the Controlled Product Regulations and the MSDS contains all of the information required by the Controlled Product Regulations. 16. Other Information Other Precautions No information available.
Pages to are hidden for
"ETP Gold Cutting Fluid - MSDS Document"Please download to view full document