Emergency Evacuation and Fire Saftey Template

Document Sample
Emergency Evacuation and Fire Saftey Template Powered By Docstoc
					PART NUMBER                                 DESCRIPTION
150MIT65B00112       SPOTFACE TOOLS − CORROSION REMOVAL, WING BOX
15MIT65B00717        REPLACED BY G71021
2CF65B05528-1        BALANCE STAND - OUTBD AILERON; UPPER RUDDER; OUTBD ELEVATOR
2ME50-7945           REPLACED BY F70324
2ME65B00002          WRENCH-SPANNER, SAFETY LANYARD, TIE DOWN LOCKS
2ME65B89603          REPLACED BY A71010
2ME65B89603          REPLACED BY A71013 FOR FUTURE PROCUREMENT
2ME65B89603          REPLACED BY G24013−1
2ME65B89603          ACCESSORY ADAPTER - HOIST SYSTEM RB211 AND CF6-50
2MIT65−45109−22      MISC. TOOL ADAPTER − ENGINE UNIVERSAL PROTCR
2MIT65-73762         CANCELLED
2OHME65B94200−1      SUPERSEDED BY G71032
2TE65−45113          TEST EQUIPMENT AUTO SPEED BRAKE TEST BOX
2TE65-73720-1        REPLACED BY F80209
2TE65-73720-2        REPLACED BY F80209-1
2TE65B00776-1        HARNESS − CALIBRATION ADAPTER, FUEL QUANTITY
2TE65B00776-101      HARNESS − CALIBRATION ADAPTER, FUEL QUANTITY
2TE65B00776-51       HARNESS − CALIBRATION ADAPTER, FUEL QUANTITY
2TSJ60B00002         TILT TABLE − INS & GYRO UNITS
3MIT65B89603         TOOL SET - RB211 ENGINE MOUNT BOLT
3OHME65B00002        REPLACED BY J07008
3OHME65B00002        SLING - TETHERRING/LIFTING AIRPLANE RECOVERY
3OHME65B89603        SUPERSEDED BY G71030
3TE65−73762          JACKING ADAPTER − NOSE GEAR INST’L
4MIT65B80307-1+A55   PROTRACTOR ASSY − CONTROL COLUMN
4MIT69-58847-43      MISC TOOL − VORTEX GENERATOR INST STA1088 TO
4PRE50−7945          SAFETY BARRIER − ENTRY & GALLEY DOORS
4PRE50-7945          REPLACED BY C52012-1
5ME65−73788−1        REPLACED BY F70330−15
5ME65-73788-1        REPLACED BY F70330-15
6ME65-73762          REPLACED BY F70263
7ME65−73761−1        MECH. EQUIPMENT − FWD TRUNNION BRG. (MLG)
7MIT5−88439          WRENCH − STAB. TRIM ACTUATOR GEAR TO INSTALL OR
A00001-*             WELDING SPECIFICATION - GROUND SUPPERT EQUIPMENT
A00003-1             TONGUE - TRAILER
A00003-2             TONGUE - TRAILER
A00003-3             TONGUE - TRAILER
A00004-*             DOOR AND THRESHOLD CONFIGURATION - LOWER CARGO
A07001−1             SUPEREDED BY A07001−11
A07001-11            JACK ADAPTER - FORWARD BODY
A07002-1             EMERGENCY JACKING EQUIPMENT - NLG
A07002-11            EMERGENCY JACKING EQUIPMENT - NLG
A07002-12            EMERGENCY JACKING EQUIPMENT - NLG
A07003-1             JACK ADAPTER - OUTBOARD WING
A07004−1             REPLACED BY A07008−1
A07004−1,−8          REPLACED BY A07004−13
A07004−13            SUPERSEDED BY A07008−1
A07004−4             REPLACED BY A07008−1 FOR FUTURE PROCUREMENT
A07004-1             JACKING BAR SET - MLG AXLE
A07004-8             JACKING BAR SET - MLG AXLE
A07005-1             HOIST ADAPTER - AIRPLANE RECOVERY
A07005-2             HOIST ADAPTER - AIRPLANE RECOVERY
A07006-1             TORQUE MULTIPLIER EQPT - TENSION BOLTS,
A07007−1             SUPERSEDED BY A07007−25
A07007−25            SUPERSEDED BY A07007−33
A07007-33            SLING - VERITCAL FIN INSTALLATION AND REMOVAL
A07008−1             REPLACED BY A07004−4 FOR FUTURE PROCUREMENT
A07008−1             REPLACED BY A07008−19
A07008-19            JACKING BAR EQPT - MAIN LANDING GEAR AXLE
A07009-1             JACKING BAR EQPT - MAIN LANDING GEAR AXLE
A07011-1             HOIST EQPT - AIRPLANE RECOVERY, WITHOUT MLG
A07011-2             HOIST EQPT - AIRPLANE RECOVERY, WITHOUT MLG
A09002-*             DATA SHEET - 767 TOWBAR DESIGN
A09003-2             LOCKPIN-NOSE GEAR TOWING LEVER.
A10001               CANCELLED
A10001-1             SUPERSEEDED BY A10001-14
A10002−1             REPLACED BY A10002−9
A10002-1             POLE ASSY-R/I PITOT STATIC PROBE COVER.
A10002-7             POLE ASSY-R/I PITOT STATIC PROBE COVER.
A10002-9             POLE ASSY-R/I PITOT STATIC PROBE COVER.
A12001−1             REPLACED BY A12001−14
A12001-14            FUEL SAMPLING EQUIPMENT
A12001-15            FUEL SAMPLING EQUIPMENT
A12004−1             SUPERSEDED BY A12004−40
A12004-40            PLATFORM - ACCESS, MLG WHEEL WELL
A12005-1             LUBRICATION ADAPTER - ATTACH FITTING,
A12006-1             LADDER - ACCESS DOOR, E/E BAY, 767
A12007−1             SUPERSEDED BY A12007−20
A12007−11            REPLACED BY A12007−20
A12007−11            REPLACED BY A12007−23
                                                                                   www.sinters.ca
PART NUMBER                             DESCRIPTION
A12007−2        REPLACED BY A12007−21
A12007-20       ADAPTER - TIRE INFLATION
A12007-23       ADAPTER - TIRE INFLATION
A12008-1        LUBRICATION ADPTR - AFT WHL WELL BLKD,
A20001−1        REPLACED BY A20001−75
A20001−1        SUPERSEDED BY A20001−79
A20001−55       SUPERSEDED BY A20001−83
A20001−75       SUPERSEDED BY A20001−79
A20001−75/−77   SUPERSEDED BY A20001−79
A20001−77       SUPERSEDED BY A20001−79
A20001−79       SUPERSEDED BY A20001−82
A20001-65       BOOM HOIST - GENERAL (400 LB CAPACITY)
A20001-82       BOOM HOIST - GENERAL (400 LB CAPACITY)
A20001-83       BOOM HOIST - GENERAL (400 LB CAPACITY)
A20002−1        SUPERSEDED BY A20002−4
A20002-4        ATTACH FITTING SET - WING/HORIZONTAL
A20004−1        SUPERSEDED BY A20004−64
A20004−3        SUPERSEDED BY A20004−68
A20004−64       SUPERSEDED BY A20004−72
A20004−70       SUPERSEDED BY A20004−76
A20004−72       REPLACED BY A20004−78
A20004-2        RIG PIN SET
A20004-68       RIG PIN SET
A20004-72       RIG PIN SET
A20004-76       RIG PIN SET
A20004-78       RIG PIN SET
A20005−1        SUPERSEDED BY A20005−5
A20005−5        SUPERSEDED BY A20005−9
A20005-9        CLAMP - CONTROL CABLE
A20006−1        SUPERSEDED BY A20006−32
A20006-32       GROMMET INSTALLATION SET
A20007-1        TEST TOOL - STRIPPING FORCE, WRAPPED WIRE
A20008-1        SOCKET SET - SPHERICAL BEARING
A20008-3        SOCKET SET - SPHERICAL BEARING
A20008-6        SOCKET SET - SPHERICAL BEARING
A20011−1        SUPERSEDED BY A20011−22
A20011−22       SUPERSEDED BY A20011−64
A20011−64       REPLACED BY A20011−76
A20011-103      BUSHING REM/INSTL KIT - L.G. LOCK LINK
A20011-76       BUSHING REM/INSTL KIT - L.G. LOCK LINK
A20012−1        SUPERSEDED BY A20012−10
A20012-10       SWAGING TOOL - BEARING
A20012-11       SWAGING TOOL - BEARING
A20013-1        WORK TABLE - PILOTS AISLE STAND
A21001−1        SUPERSEDED BY A21001−44
A21001−34       SUPERSEDED BY A21001−45
A21001-44       HOIST ADAPTER - AIR CONDITIONING PACK
A21001-45       HOIST ADAPTER - AIR CONDITIONING PACK
A21002-1        REMOVAL/INSTL EQPT - AVIONICS COOLING
A21003          SUPERSEDED BY A21010
A21004          TRANSFERRED TO BAE SYSTEMS
A21004-1        Test box - Current sensor, fan, env. Ctl. Sys
A21006          CANCELLED
A21007-1        HOLD-OPEN ROD - RAM AIR DOOR, FLIGHT DISPATCH
A21008-1        HOLD OPEN SET, CABIN AIR OUTFLOW, 757 & 767
A21008-2        HOLD OPEN SET, CABIN AIR OUTFLOW, 757 & 767
A21009-1        BLANKING PLATE - EQPT COOLING MONITOR
A21010−1        REPLACED BY A21010−29
A21010−1        SUPERSEDED BY A21010−30
A21010−29       SUPERSEDED BY A21010−30
A21010−30       SUPERSEDED BY A21010−34
A21010−30       SUPERSEDED BY A21010−35
A21010−34       SUPERSEDED BY A21010−62
A21010−57       REPLACED BY A21010−70
A21010−63       SUPERSEDED BY A21010−69
A21010−69       REPLACED BY A21010−70
A21010−70       REPLACED BY A21010−72
A21010-1        REPLACED BY A21010-29
A21010-1        SUPERSEEDED BY A21010-30
A21010-29       SUPERSEEDED BY A21010-30
A21010-30       SUPERSEEDED BY A21010-34
A21010-30       SUPERSEEDED BY A21010-35
A21010-34       SUPERSEEDED BY A21010-62
A21010-35       SUPERSEEDED BY A21010-57
A21010-57       REPLACED BY A21010-70
A21010-63       REPLACED BY A21010-70
A21010-69       REPLACED BY A21010-70
A21010-70       REPLACED BY A21010-72
A21010-72       VACUUM TANK - PRESSURE RELIEF VALVE TEST
A21011−1        REPLACED BY A21011−6
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
A21011-6      TEST EQPT - LOW LIMIT VALVE
A21012-1      TEST GAUGE - INSTRUMENT COOLING MONITOR SYSTEM
A21013−1      SUPERSEDED BY A21013−50
A21013-50     HOIST ADAPTER EQPT - AIR CONDITIONAL PACK
A21014-1      LOCK - HOLD OPEN,OUTFLOW VALVE
A22001−15     REPLACED BY A22001−22
A22001-22     CONTROL UNIT - REMOTE, MAINTENANCE CONTROL
A22003−1      SUPERSEDED BY A22003−20
A22003−20     SUPERSEDED BY A22003−22
A22003-22     COMPONENT MAINTENANCE EQPT - AUTO THROTTLE
A22004-1      CHECKING FIXTURE - AUTOTHROTTLE GEAR BOX
A22005        TRANSFERRED TO BAE SYSTEMS
A22006        TRANSFERRED TO BAE SYSTEMS
A22007        TRANSFERRED TO BAE SYSTEMS
A22008−1      REPLACED BY A22008−17
A22008−17     REPLACED BY A22008−26
A22008-25     RIGGING EQPT - AUTOTHROTTLE BRAKE
A22008-26     RIGGING EQPT - AUTOTHROTTLE BRAKE
A23001        TRANSFERRED TO BAE SYSTEMS
A23002        TRANSFERRED TO BAE SYSTEMS
A23002−1      REPLACED BY A23002−14
A23003        TRANSFERRED TO BAE SYSTEMS
A23003−1      SUPERSEDED BY A23003−15
A23003−15     SUPERSEDED BY A23003−17
A23003−17     SUPERSEDED BY A23003−23
A23003−20     SUPERSEDED BY A23003−24
A23003−23     SUPERSEDED BY A23003−29
A23003−24     SUPERSEDED BY A23003−30
A23003−29     REPLACED BY A23002−34
A23003−29     REPLACED BY A23003−41
A23003−30     REPLACED BY A23003−34
A23003−30     REPLACED BY A23003−41
A23003−34     SUPERSEDED BY A23003−41
A23004        TRANSFERRED TO BAE SYSTEMS
A23006        TRANSFERRED TO BAE SYSTEMS
A23006−1      REPLACED BY A23006−22
A23006−16     REPLACED BY A23006−23
A23006−26     REPLACED BY A23006−34
A23006−26     SUPERSEDED BY A23006−45
A23006−27     REPLACED BY A23006−34
A23006−27     SUPERSEDED BY A23006−46
A23006−34     SUPERSEDED BY A23006−39
A23006−39     SUPERSEDED BY A23006−47
A23006−45     REPLACED BY A23006−47
A23006−46     REPLACED BY A23006−47
A23009        TRANSFERRED TO BAE SYSTEMS
A23009−1      SUPERSEDED BY A23009−14
A23009−14     SUPERSEDED BY A23009−20
A23009−20     REPLACED BY A23009−25
A23009−20     REPLACED BY A23009−31
A23009−25     SUPERSEDED BY A23009−31
A23011        TRANSFERRED TO BAE SYSTEMS
A23014        CANCELLED
A24001-1      HOIST EQUIPMENT - LRU’S, MAIN EE BAY
A24001-5      HOIST EQUIPMENT - LRU’S, MAIN EE BAY
A24004-1      TEST RELAY - ISOLATION REQUEST, POWER
A24004-2      TEST RELAY - ISOLATION REQUEST, POWER
A24005-1      LOAD BANK - DC GENERATION SYSTEM
A24006-1      HOIST EQUIPMENT - APU BATTERY
A24007-1      SUPPORT-ELECTRICAL GROUND POWER CABLE
A24008−1      SUPERSEDED BY A24008−19
A24008−19     REPLACED BY A24008−27
A24008−19     REPLACED BY A24008−37
A24008−27     REPLACED BY A24009−37
A24008-37     TEST BOX - HYDRAULIC MOTOR DRIVEN GCU
A24011-1      HOIST ADAPTER ASSY - INTEGRATED DRIVE GENERATOR
A24012-1      DISPATCH KIT - IDG, PW ENGINES
A25001−1      SUPERSEDED BY A25001−33
A25001-33     REPLACEMENT EQUIP - AIR CHILLER, FWD GALLEY
A25002-1      SLIDE BAR - AFT GALLEY AIR CHILLER
A25003−1      SUPERSEDED BY A25003−8
A25003−12     SUPERSEDED BY A25003−15
A25003−15     SUPERSEDED BY A25003−20
A25003−20     SUPERSEDED BY A25003−24
A25003−8      SUPERSEDED BY A25003−12
A25003-24     SIMULATOR - DOOR OPENING ACTUATOR, OFF- WING
A25004-1      SIMULATOR EQUIP - LATCH OPENING ACTUATOR, OFF-
A25005−1      SUPERSEDED BY A25005−21
A25005−21     SUPERSEDED BY A25005−29
A25005-29     SIMULATOR - GAS PRESSURE VESSEL
                                                                www.sinters.ca
PART NUMBER                           DESCRIPTION
A25006−1      CANCELLED
A25008-1      INSTL EQUIPMENT - LUGGAGE BIN SNUBBER
A25009−1      SUPERSEDED BY A25009−2
A25009-2      TOOL - REMOVAL, BALL TRANSFER UNIT
A25010−1      SUPERSEDED BY A25013−1
A25011-2      WRENCH - INTEGRATOR, OFF-WING ESCAPE SYSTEM
A25012−1      SUPERSEDED BY A25012−19
A25012−19     REPLACED BY A25012−29
A25012-29     ELECTRICAL TEST EQUIPMENT - OFF-WING ESCAPE
A25013−1      SUPERSEDED BY A25018−1
A25014−1      SUPERSEDED BY A25014−10
A25014−10     SUPERSEDED BY A25014−16
A25014−16     SUPERSEDED BY A25014−19
A25014−19     SUPERSEDED BY A25014−29
A25014-29     SIMULATOR EQPT - LATCH OPENING, OFF-WING ESCAPE
A25015        CANCELLED
A25015-1      GAGE SET-ADJUSTMENT, SLIDE COMPARTMENT DOOR
A25016-1      SAFETY EQPT - ESCAPE SYSTEM, OFF-WING
A25017-1      ADJUSTOR - FRICTION BALL CATCH
A25018−1      SUPERSEDED BY A25018−10
A25018-10     LEVER - STOWAGE BIN RELEASE
A25019-1      GAUGE - ACTUATOR, LATCH OPENING, OFF-WING
A25020−1      REPLACED BY A25020−4
A25020−4      REPLACED BY A25020−8
A25020-8      GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW
A25021-1      PUSH PLATE - SPRING LOADED PDU
A25022-1      TEST EQPT - PDU, GUIDES & ROLLOUT STOPS
A26001−1      SUPERSEDED BY A26001 (SEE DRAWING − REV E)
A26001−133    SUPERSEDED BY A26001−165
A26001−165    REPLACED BY A26001−174
A26001−174    REPLACED BY A26001−187
A26001−41     SUPERSEDED BY A26001−69
A26001−69     SUPERSEDED BY A26001−72
A26001−72     SUPERSEDED BY A26002−106
A26001-131    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-132    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-134    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-135    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-136    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-137    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-138    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-139    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-144    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-145    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-175    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-176    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-182    ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-187    TEST EQUIPMENT - ELECTRICAL, BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM
A26001-24     ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-3      ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-4      ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26001-5      ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE
A26002−1      SUPERSEDED BY A26002−17
A26002−17     SUPERSEDED BY A26002−28
A26002−23     SUPERSEDED BY A26002−28
A26002−28     SUPERSEDED BY A26002−51
A26002−51     SUPERSEDED BY A26002−54
A26002-36     TEST BOX - TIME DELAY, CARGO FIRE EXTINGUISHER
A26002-54     TEST BOX - TIME DELAY, CARGO FIRE EXTINGUISHER
A26003−1      SUPERSEDED BY A26003−7
A26003−7      REPLACED BY A26003−10
A26003-10     TEST EQUIPMENT - REGULATOR, CARGO FIRE
A26004-1      PLUG EQPT - DISCHARGE NOZZLE, CARGO COMPT FIRE
A26005-1      PLATFORM - MAINTENANCE, CARGO SIDEWALL
A26006-1      TEST BOX - APU/ENGINE FIRE DETECTION SYSTEM
A27001-1      GAGES - INBD AILERON, RUDDER, OUTBD AILERON,
A27001-2      GAGES - INBD AILERON, RUDDER, OUTBD AILERON,
A27001-3      GAGES - INBD AILERON, RUDDER, OUTBD AILERON,
A27001-4      GAGES - INBD AILERON, RUDDER, OUTBD AILERON,
A27003−1      SUPERSEDED BY A27003−13
A27003−13     REPLACED BY A27003−23
A27003−13     SUPERSEDED BY A27003−23
A27003−16     REPLACED BY A27003−23
A27003−16     SUPERSEDED BY A27003−23
A27003-23     LOCK SET - ACTUATOR, RUDDER
A27004-1      HOIST ADAPTER - L.E. SLAT DRIVE
A27004-2      HOIST ADAPTER - L.E. SLAT DRIVE
A27005-1      LOCK - OUTBOARD AILERON
A27006−17     SUPERSEDED BY A27006−33
A27006−33     SUPERSEDED BY A27006−41
                                                                                    www.sinters.ca
PART NUMBER                            DESCRIPTION
A27006-41       HOIST EQUIPMENT - HORIZONTAL STABILIZER TRIM
A27007-1        GROUND LOCK - LEADING EDGE SLATS
A27008          CANCELLED
A27008          SUPERSEDED BY A27111
A27008−1        SUPERSEDED BY A27008−11
A27008−11       SUPERSEDED BY A27008−19
A27009−1        SUPERSEDED BY A27009−7
A27009-7        LOCK - TRAILING EDGE FLAPS
A27010−1,−5     SUPERSEDED BY A27010−7,−11
A27010−13       REPLACED BY A27010−19
A27010−7        REPLACED BY A27010−15
A27010-11       LOCK SET - CIRCUIT BREAKER
A27010-15       LOCK - TRAILING EDGE FLAPS
A27011          CANCELLED
A27011          SUPERSEDED BY A27108
A27012−1        SUPERSEDED BY A27012−20
A27012−20       SUPERSEDED BY A27012−30
A27012-30       LOCK SET - CIRCUIT BREAKER
A27013-1        DEACTIVATION EQUIP - INBOARD AILERON
A27015-1        SLING EQUIPMENT - INBD/OUTBD AILERON
A27016−1        SUPERSEDED BY A27016−21
A27016−22       SUPERSEDED BY A27016−27
A27016-27       SLING EQUIP - INBD T.E. FLAP
A27017−1        SUPERSEDED BY A27017−41
A27017−21       SUPERSEDED BY A27017−22
A27017-41       SLING EQUIPMENT - LEADING EDGE SLATS
A27019-8        RESTRAINT - AFT FLAP TO INBD T.E. FLAP
A27020-1        STRAIGHT-EDGE - CONTROL WHEEL
A27021−1        SUPERSEDED BY A27021−96
A27021−55       SUPERSEDED BY A27021−64
A27021−63       SUPERSEDED BY A27021−82
A27021−64       SUPERSEDED BY A27021−83
A27021−82       SUPERSEDED BY A27021−97
A27021−83       SUPERSEDED BY A27021−98
A27021-29       ADAPTER EQUIPMENT - CONTROL WHEELS
A27021-69       ADAPTER EQUIPMENT - CONTROL WHEELS
A27021-96       ADAPTER EQUIPMENT - CONTROL WHEELS
A27021-97       ADAPTER EQUIPMENT - CONTROL WHEELS
A27021-98       ADAPTER EQUIPMENT - CONTROL WHEELS
A27022−1        SUPERSEDED BY A27022−34
A27022−34       REPLACED BY A27022−44
A27022−44       REPLACED BY A27022−75
A27022−75       REPLACED BY A27022−81
A27022-81       SLING EQPT - RUDDER INSTL/REMOVAL
A27023−1        SUPERSEDED BY A27023−11
A27023−11       REPLACED BY A27023−17
A27023−17       SUPERSEDED BY A27023−18
A27023−18       SUPERSEDED BY A27023−22
A27023-22       SPACER KIT - INBOARD/OUTBOARD, SLAT
A27024−1        SUPERSEDED BY A27024−29
A27024−2        REPLACED BY A27024−47
A27024−29       REPLACED BY A27024−31
A27024−47       SUPERSEDED BY A27024−55
A27024-31       RIGGING BAR - AILERON
A27024-55       RIGGING BAR - AILERON
A27025-1        RIGGING EQUIPMENT - FORCE TRANSDUCER, ELEVATOR
A27026−1        SUPERSEDED BY A27026−7
A27026-7        HOIST BRACKET - FISHPOLE HOIST FLAP PDU
A27027−1        SUPERSEDED BY A27027−14
A27027−34/−40   SUPERSEDED BY A27027−47/−48
A27027−47       SUPERSEDED BY A27027−53
A27027−48       SUPERSEDED BY A27027−54
A27027-53       SLING EQUIPMENT - OUTBD T.E. FLAP
A27027-54       SLING EQUIPMENT - OUTBD T.E. FLAP
A27028−1        SUPERSEDED BY A27028−11
A27028-11       CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON
A27029−1        SUPERSEDED BY A27029−28
A27029-28       FIXTURE ASSY - SPRING INSTL & REMOVAL, LOAD
A27030          TRANSFERRED TO BAE SYSTEMS
A27030−26       SUPERSEDED BY A27030−33
A27030−33       SUPERSEDED BY A27030−36
A27030−36       SUPERSEDED BY A27030−38
A27030−38       SUPERSEDED BY A27030−42
A27030−40       SUPERSEDED BY A27030−44
A27030−41       SUPERSEDED BY A27030−45
A27030−42       SUPERSEDED BY A27030−43
A27030−43       SUPERSEDED BY A27030−48
A27030−48       SUPERSEDED BY A27030−51
A27030−51       SUPERSEDED BY A27030−66
A27035-1        SCREWDRIVER - ADAPTER RUDDER-ELEVATOR FEEL
                                                                  www.sinters.ca
PART NUMBER                          DESCRIPTION
A27036        BAE
A27036        TRANSFERRED TO BAE SYSTEMS
A27036−1      SUPERSEDED BY A27036−16
A27036−16     SUPERSEDED BY A27036−22
A27037-1      TEST EQPT - LOCKOUT MECHANISM-OUTBOARD AILERON
A27038-1      BREAKOUT BOX - PRINTED CIRCUIT CARD
A27038-10     BREAKOUT BOX - PRINTED CIRCUIT CARD
A27038-20     BREAKOUT BOX - PRINTED CIRCUIT CARD
A27038-6      BREAKOUT BOX - PRINTED CIRCUIT CARD
A27038-6      BREAKOUT BOX - PRINTED CIRCUIT CARD
A27039−1      REPLACED BY A27039−26
A27039−19     REPLACED BY A27039−27
A27039−9      REPLACED BY A27039−19
A27039−9      SUPERSEDED BY A27039−19
A27039-26     BREAKOUT BOX - ARINC 600, BENCH TEST
A27039-27     BREAKOUT BOX - ARINC 600, BENCH TEST
A27040−1      SUPERSEDED BY A27040−18
A27040-18     CHECKING EQUIPMENT - BEARING WIDTH
A27041−1      SUPERSEDED BY A27041−34
A27041−104    SUPERSEDED BY A27041−142
A27041−142    SUPERSEDED BY A27041−177
A27041−143    SUPERSEDED BY A27041−161
A27041−170    SUPERSEDED BY A27041−177
A27041−34     SUPERSEDED BY A27041−140
A27041-105    SUPERSEEDED BY A27041-143
A27041-143    SUPERSEEDED BY A27041-161
A27041-161    SUPERSEEDED BY A27041-175
A27041-175    TEST EQPT - ELEVATOR FEEL AND CENTERING UNIT
A27041-176    TEST EQPT - ELEVATOR FEEL AND CENTERING UNIT
A27041-177    TEST EQPT - ELEVATOR FEEL AND CENTERING UNIT
A27042-1      FUNCTIONAL TEST EQUIPMENT - SPOILER ACTUATOR
A27043-1      FIXTURE - TEST EQPT,ACTUATOR,INBD & OUTBD
A27044        TRANSFERRED TO BAE SYSTEMS
A27044−1      SUPERSEDED BY A27044−33
A27044−33     REPLACED BY A27044−35, REDRAWN AS A27109
A27044−38     SUPERSEDED BY A27044−44
A27044−44     SUPERSEDED BY A27044−53
A27045        TRANSFERRED TO BAE SYSTEMS
A27045−1      SUPERSEDED BY A27045−16
A27046−141    REPLACED BY A27046−191
A27046−161    SUPERSEDED BY A27046−176
A27046−162    SUPERSEDED BY A27046−177
A27046−163    REPLACED BY A27046−192
A27046−2      SUPERSEDED BY A27046−140
A27046−5      SUPERSEDED BY A27044−99
A27046−6      SUPERSEDED BY A27046−162
A27046−7      SUPERSEDED BY A27046−160
A27046−80     SUPERSEDED BY A27046−161
A27046-140    TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-160    TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-176    TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-177    TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-191    TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-192    TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-3      TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-4      TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-8      TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27046-99     TEST FIXTURE - POWER DRIVE COMPONENTS, FLIGHT
A27047-1      TEST BLOCK - CARTRIDGE, VALVE, SPOILER
A27048-1      FIXTURE - CHECK, GEARBOX BACKLASH
A27048-2      FIXTURE - CHECK, GEARBOX BACKLASH
A27048-3      FIXTURE - CHECK, GEARBOX BACKLASH
A27048-40     FIXTURE - CHECK, GEARBOX BACKLASH
A27049-1      FIXTURE - CHECK BACKLASH L.E. SLAT ANGLE GEAR
A27051−1      REPLACED BY A27051−31
A27051-31     TOOL SET - T.E. FLAP DRIVE AND L.E. SLAT DRIVE
A27052        TRANSFERRED TO BAE SYSTEMS
A27053        TRANSFERRED TO BAE SYSTEMS
A27053−1      SUPERSEDED BY A27053−18
A27053−18     SUPERSEDED BY A27053−21
A27053−21     SUPERSEDED BY A27053−23
A27053−23     SUPERSEDED BY A27053−26
A27053−26     REPLACED BY A27053−29
A27054−1      SUPERSEDED BY A27054−14
A27054-14     FIXTURE - HOLDING, GEAR ASSY, L.E. SLAT DRIVE
A27055-1      FIXTURE - SHIM THICKNESS, WORM GEAR, T.E. FLAP
A27056        CANCELLED
A27056        REPLACED BY A27109
A27057−1      REPLACED BY A27057−13
A27057−1      REPLACED BY A27057−9
                                                               www.sinters.ca
PART NUMBER                          DESCRIPTION
A27057−9      REPLACED BY A27057−13
A27057-13     PROTECTOR BRACKET EQPT - FEEL CENTERING & TRIM
A27058−1      SUPERSEDED BY A27058−57
A27058−57     SUPERSEDED BY A27058−60
A27058-60     JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING
A27059        TRANSFERRED TO BAE SYSTEMS
A27060−1      SUPERSEDED BY A27060−11
A27060-11     JIG EQPT - CONTROL UNIT, INBD & OUTBD L.E. SLAT
A27061−1      REPLACED BY A27061−44
A27061−46     REPLACED BY A27061−54
A27061-44     TOOL SET - T.E. ROTARY ACTUATOR
A27061-54     TOOL SET - T.E. ROTARY ACTUATOR
A27062-1      TOOL SET - STABILIZER TRIM DRIVE
A27063-*      BREAKOUT BOX EQPT - POSITION SENSORS, FLIGHT
A27063−42     REPLACED BY A27063−88
A27063−71     REPLACED BY A27063−91
A27070−1      SUPERSEDED BY A27070−18
A27070−76     SUPERSEDED BY A27070−80
A27070-48     BEARING INSTL EQPT - ROTARY ACT./OFFSET
A27070-61     BEARING INSTL EQPT - ROTARY ACT./OFFSET
A27070-65     BEARING INSTL EQPT - ROTARY ACT./OFFSET
A27070-80     BEARING INSTL EQPT - ROTARY ACT./OFFSET
A27071−1      SUPERSEDED BY A27071−43
A27071−43     SUPERSEDED BY A27071−48
A27071−48     REPLACED BY A27071−84
A27071-123    TEST EQPT - ROTARY ACTUATOR, T.E. FLAP
A27071-84     TEST EQPT - ROTARY ACTUATOR, T.E. FLAP
A27072−1      SUPERSEDED BY A27072−42
A27072−21     SUPERSEDED BY A27072−30
A27072−42     SUPERSEDED BY A72072−55
A27072−43     SUPERSEDED BY A27072−55
A27072−44     SUPERSEDED BY A27072−55
A27072−53     SUPERSEDED BY A27072−55
A27072-55     TEST FIXTURE - STABILIZER TRIM DRIVE
A27073-1      SOCKET - THIN WALL, GEARBOX, INBD L.E. SLAT
A27074−1      SUPERSEDED BY A27074−120
A27074−120    SUPERSEDED BY A27074−128
A27074−128    REPLACED BY A27074−146
A27074-146    LOCK SET - INBD AND OUTBD FLAP LINKAGE, T.E.
A27075-1      WRENCH - ADJUSTMENT, ACTUATOR ASSY, SPOILER
A27076        CANCELLED
A27076−1      REPLACED BY A27089−1
A27077-1      ADAPTER - L.E. SLAT DRIVE
A27078-7      SPLINE ADAPTERS - ROTARY ACTUATOR & GEARBOX-
A27079−1      SUPERSEDED BY A27079−71
A27079−71     SUPERSEDED BY A27079−78
A27079−78     REPLACED BY A27079−89
A27079-89     TEST EQUIPMENT - POWER DRIVE UNIT, T.E. FLAP &
A27079-96     TEST EQUIPMENT - POWER DRIVE UNIT, T.E. FLAP &
A27081-1      READOUT AND CONTROL EQUIPMENT - FUNCTIONAL TEST
A27081-2      READOUT AND CONTROL EQUIPMENT - FUNCTIONAL TEST
A27082        CANCELLED
A27082-1      DRILL JIG EQUIPMENT ELEVATOR TORQUE TUBE
A27083        TRANSFERRED TO BAE SYSTEMS
A27084        SUPERSEDED BY A27092
A27085-1      SLING ASSY - STABILIZER TRIM DRIVE MECHANISM
A27086−1      SUPERSEDED BY A27086−10
A27086-10     SUPPORT FIXTURE - ELEVATOR SLAVE LINKAGE
A27087-1      WRENCH - CONTROL LEVER, SPEED BRAKE
A27088−1      SUPERSEDED BY A27088−6
A27088−6      SUPERSEDED BY A27088−13
A27088-13     LINK - DUMMY, TRIM ACTUATOR, AILERON
A27089−1      SUPERSEDED BY A27089−5
A27089−5      SUPERSEDED BY A27089−9
A27089-9      GAGE - RIGGING, L.E. SLAT OUTBD WING
A27092−1      SUPERSEDED BY A27092−25
A27092−25     SUPERSEDED BY A27092−53
A27092−53     SUPERSEDED BY A27092−61
A27092−84     REPLACED BY A27092−106
A27092-106    ACTUATOR/DEACTUATOR SET - PROXIMITY SENSORS
A27092-70     ACTUATOR/DEACTUATOR SET - PROXIMITY SENSORS
A27092-84     REPLACED BY A27092-106
A27092-93     ACTUATOR/DEACTUATOR SET - PROXIMITY SENSORS
A27093−23     SUPERSEDED BY A27093−27
A27093-1      TEST EQUIPMENT - TE FLAPS ASYMMETRY FAULT
A27093-27     TEST EQUIPMENT - TE FLAPS ASYMMETRY FAULT
A27094−1      REPLACED BY A27094−5
A27094-5      SPACER SET - PRELOAD L.E. SLAT RIGGING
A27095        REPLACED BY A27021
A27095−1      SUPERSEDED BY A27095−10
                                                                www.sinters.ca
PART NUMBER                           DESCRIPTION
A27095-10     SCALE - CONTROL COLUMN ANGLE
A27096        TRANSFERRED TO BAE SYSTEMS
A27097-1      ADAPTER - PROTRACTOR, THRUST REVERSER LEVEL
A27098        TRANSFERRED TO BAE SYSTEMS
A27099-1      SHAFT CLAMP - T.E. FLAP DRIVE
A27100-1      TEST BOX - STICK NUDGER
A27101−1      SUPERSEDED BY A27101−5
A27101-5      WRENCH - ADJUSTMENT, INBOARD LE SLATS
A27102−1      SUPERSEDED BY A27102−5
A27102−5      SUPERSEDED BY A27102−7
A27102-7      ADAPTER - L.E. SLAT & T.E. FLAP, MANUAL DRIVE
A27104        CANCELLED
A27105−1      SUPERSEDED BY A27105−6
A27105−6      SUPERSEDED BY A27105−9
A27105-9      AUXILIARY DETENT - FLAP ADJUSTMENT ASSY
A27106-1      BUSHING PULLER - OUTBOARD AILERON ACTUATOR
A27107-1      DUMMY LINK SET - FLAP LOAD RELIEF ACTUATOR
A27108−1      SUPERSEDED BY A27108−10
A27108−10     SUPERSEDED BY A27108−13
A27108-13     LOCK SET - SPOILER ACTUATOR
A27109        USED IN LIEU OF CANCELLED DRAWING A27056
A27109-1      RIGGING BAR - RATION CHANGER INSTL. RUDDER
A27110-1      MOUNT EQPT - INBOARD AILERON RIGGING BAR
A27110-20     MOUNT EQPT - INBOARD AILERON RIGGING BAR
A27111−1      SUPERSEDED BY A27111−11
A27111-11     LOCK EQPT - ELEVATOR ACTUATOR
A27112-1      RIGGING EQPT - L.E. SLAT POSITION SENSOR SWITCH
A27114-1      REMOVAL/INSTL EQPT - PIVOT BEARING, HORIZ
A27115−1      SUPERSEDED BY A27115−26
A27115−26     SUPERSEDED BY A27115−34
A27115−34     REPLACED BY A27115−36
A27115−34     REPLACED BY A27115−41
A27115−36     SUPERSEDED BY A27115−41
A27115-41     TEST EQPT - OUTBOARD AILERON LOCKOUT ACTUATOR
A27116-1      SLING - OUTBD SLAT PDU
A27117-1      TEST EQPT - L.E. SLAT 5 & 8, INBD OFFSET
A27118−1      SUPERSEDED BY A27118−90
A27118-90     LOCK EQPT - INBOARD AND OUTBOARD TE, FLAP
A27119-1      HOLDING FIXTURE EQPT - GEAR ASSY, L.E. SLAT
A27120−1      SUPERSEDED BY A27120−43
A27120-43     ASSY/DISASSY EQPT - ROTARY ACTUATOR, TRAILING
A27121-1      TOOL SET - SEAL INSTALLATION
A27122-1      WRENCH EQPT - BEARING RETAINING NUT, INBD FLAP
A27123-1      MEASUREMENT EQPT - BEVEL GEAR TEETH, STAB TRIM
A27124-1      FORCE EQPT - RUDDER FREEPLAY CHECK
A27125-1      MEASUREMENT TOOL - RUDDER & ELEVATOR POWER
A28001-1      HOSE SET - DEFUELING, MAIN & OVERIDE PUMP
A28002        REPLACED BY J28001
A28002        SUPERSEDED BY J28013
A28002−1      SUPERSEDED BY A28002−6
A28002-6      DRAIN HOSE - SUMP, FUEL SYSTEM
A28003−33     REPLACED BY A28003−44
A28003-43     VENTILATION EQUIPMENT - FUEL TANK
A28003-44     VENTILATION EQUIPMENT - FUEL TANK
A28004        REPLACED BY G28005
A28005−17     SUPERSEDED BY A28005−33,−26
A28005−22     SUPERSEDED BY A28005−35
A28005−24     REPLACED BY A28005−35
A28005−26     SUPERSEDED BY A28005−36
A28005−33     SUPERSEDED BY A28005−37
A28005−35     REPLACED BY A28005−42
A28005−36     SUPERSEDED BY A28005−42
A28005−36     SUPERSEDED BY A28005−42
A28005−42     REPLACED BY A28005−50
A28005−44     SUPERSEDED BY A28005−53
A28005−8      SUPERSEDED BY A28005−35
A28005-24     TEST EQPT - LEAK & PRESSURE, APU FUEL LINE
A28005-43     TEST EQPT - LEAK & PRESSURE, APU FUEL LINE
A28005-48     TEST EQPT - LEAK & PRESSURE, APU FUEL LINE
A28005-50     TEST EQPT - LEAK & PRESSURE, APU FUEL LINE
A28005-53     TEST EQPT - LEAK & PRESSURE, APU FUEL LINE
A28005-56     TEST EQPT - LEAK & PRESSURE, APU FUEL LINE
A28006-1      TEST BOX - FUEL LEVEL SENSORS, SURGE TANK
A28006-2      TEST BOX - FUEL LEVEL SENSORS, SURGE TANK
A28006-22     TEST BOX - FUEL LEVEL SENSORS, SURGE TANK
A28006-27     TEST BOX - FUEL LEVEL SENSORS, SURGE TANK
A28007−1,−2   REPLACED BY A28007−27,−28
A28007−27     SUPERSEDED BY A28007−39
A28007−28     SUPERSEDED BY A28007−40
A28007-39     TEST BOX - FUEL QUANTITY INDICATING SYSTEM
                                                                www.sinters.ca
PART NUMBER                            DESCRIPTION
A28007-40      TEST BOX - FUEL QUANTITY INDICATING SYSTEM
A28007-41      TEST BOX - FUEL QUANTITY INDICATING SYSTEM
A28008         SUPERSEDED BY J28012
A28008−1       SUPERSEDED BY A28008−8
A28008−8       SUPERSEDED BY J28012−1
A28008-8       DRAIN HOSE - SUMP VALVE, CENTER AUXILIARY FUEL
A28009−1       SUPERSEDED BY A28009−8
A28009−8       REPLACED BY A28009−13
A28009-13      EXTENDER BOARD - SURGE TANK FUEL LEVER SENSOR
A28010-1       SPANNER WRENCH - FUEL SUMP DRAIN VALVE
A28010-2       SPANNER WRENCH - FUEL SUMP DRAIN VALVE
A28011         REPLACED BY G28018
A28011−1       SUPERSEDED BY A28011−48,−49,−50
A28011-48      TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES &
A28011-49      TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES &
A28011-50      TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES &
A28012-1       SPANNER WRENCH - FUEL SUMP DRAIN VALVE
A28012-2       SPANNER WRENCH - FUEL SUMP DRAIN VALVE
A28013−1       SUPERSEDED BY A28013−10 OR A28013−11
A28013-10      ADAPTER EQPT - AIR SUPPLY, SURGE TANK
A28013-11      ADAPTER EQPT - AIR SUPPLY, SURGE TANK
A28084         CANCELLED
A29001-1       HOIST ADAPTER - AIR DRIVEN HYDRAULIC PUMP
A29002-6       LOCKING PIN - VALVE, HYD RESERVOIR
A29003−1       SUPERSEDED BY A29003−49
A29003−49      REPLACED BY A29003−54
A29003-49      TOOL SET - OVERHAUL, HYDRAULIC FILTER
A29003-54      TOOL SET - OVERHAUL, HYDRAULIC FILTER
A29004-1       TOOL SET - OVERHAUL, HYDRAULIC FILTER
A29005-1       CAP - SEALING, PRESSURE TRANSMITTER MOUNT
A29006−1       SUPERSEDED BY A29006−19
A29006-19      TEST EQPT - SWITCH, PRESSURE/THERMAL
A30002-1       PLUG EQUIPMENT - THERMAL ANTI-ICING DUCT, WING
A30003-1       BREAKOUT BOX - VIEWPORT HEATER
A31003         TRANSFERRED TO BAE SYSTEMS
A31003−1       REPLACED BY A31003−25
A31003−25      REPLACED BY A31003−29
A31003−25      SUPERSEDED BY A31003−33
A31003−29      SUPERSEDED BY A31003−34
A31004         TRANSFERRED TO BAE SYSTEMS
A31005         TRANSFERRED TO BAE SYSTEMS
A31005−1       REPLACED BY A31005−14
A31006−5       REPLACED BY A31006−7
A31006-7       SHORTING MODULE - MASTER WARNING PRINTED
A31007−11      SUPERSEDED BY A31007−59
A31007−16      SUPERSEDED BY A31007−30
A31007−30      REPLACED BY A31007−34
A31007-1       ADAPTER CABLE - TESTER, DIGITAL FLIGHT RECORDER
A31007-30      ADAPTER CABLE - TESTER, DIGITAL FLIGHT RECORDER
A31007-39      ADAPTER CABLE - TESTER, DIGITAL FLIGHT RECORDER
A31007-49      ADAPTER CABLE - TESTER, DIGITAL FLIGHT RECORDER
A31007-59      ADAPTER CABLE - TESTER, DIGITAL FLIGHT RECORDER
A31008         TRANSFERRED TO BAE SYSTEMS
A31010         TRANSFERRED TO BAE SYSTEMS
A32001−1       REPLACED BY A32080−1
A32002         REPLACED BY A32099
A32002−1       SUPERSEDED BY A32002−14
A32002−14      SUPERSEDED BY A32099−1
A32002-14      SPRING EXTENDER - DRAG STRUT, MLG
A32003-1       SPRING COMPRESSOR - SIDE STRUT, MLG
A32004-1       WRENCH ADAPTER - GLAND NUT, MLG
A32004-4       WRENCH ADAPTER - GLAND NUT, MLG
A32004-5       WRENCH ADAPTER - GLAND NUT, MLG
A32005−1       SUPERSEDED BY A32005−26
A32005−43      SUPERSEDED BY A32005−54
A32005-54      REPLACEMENT EQUIP. - SEAL, LOWER BEARING MLG
A32006−1       REPLACED BY A32006−72
A32006−72      SUPERSEDED BY A32006−75
A32006−75      REPLACED BY A32006−77
A32006-77      SLING EQUIPMENT - RETRACT ACTUATOR, MLG
A32007−1       SUPERSEDED BY A32007−5
A32007−16      REPLACED BY A32007−17
A32007−17      REPLACED BY A32098−1
A32007−5       REPLACED BY A32007−16
A32007-17      PROTECT EQPT - AXLE AND AXLE THREAD, MAIN
A32008−1       REPLACED BY A32008−51
A32008−1,−44   SUPERSEDED BY A32008−51,−53
A32008-51      SLING EQUIPMENT - MLG COMPONENTS
A32008-52      SLING EQUIPMENT - MLG COMPONENTS
A32008-53      SLING EQUIPMENT - MLG COMPONENTS
                                                                 www.sinters.ca
PART NUMBER                              DESCRIPTION
A32009            CANCELLED
A32010-1          PIN PULLER - RETRACT ACTUATOR, MLG
A32011-1          PULLER - TRUNNION PINS, NLG
A32012−1          SUPERSEDED BY A32012−6
A32012−6,−9,−12   REPLACED BY A32012−13
A32012-13         WRENCH - WHEEL RETAINING NUT, M.L.G.
A32013-1          PIN PULLER - UPPER DRAG BRACE, NLG
A32014-1          DOWN LOCK - MLG & NLG
A32014-2          DOWN LOCK - MLG & NLG
A32015−1          SUPERSEDED BY A32015−9
A32015-9          INSTL./REM. TOOL - DOWN LOCK, MLG & NLG
A32016−1          SUPERSEDED BY A32016−13
A32016−13         SUPERSEDED BY A32016−17
A32016-17         PIN PULLER - BRAKE ROD, MLG
A32017-1          PULLER EQUIPMENT - FUSE BOLTS, FWD TRUNNION
A32018            REPLACED BY A32099
A32018            SUPERSEDED BY A32099
A32018−1          SUPERSEDED BY A32099−1
A32019−1          REPLACED BY A32036−43
A32020-1          HOIST ADAPTER - DRAG STRUT, NLG
A32021-1          WRENCH ADAPTER - GLAND NUT, N.L.G.
A32022-1          PROTECTOR - AXLE, NOSE LANDING GEAR
A32023-1          SLING - RETRACT ACTUATOR, NLG
A32025            REPLACED BY A32101
A32025-1          WRENCH ADAPTER - WHEEL RETAINING AXLE NUT,
A32026−1          SUPERSEDED BY A32026−2
A32026−2          SUPERSEDED BY A32026−60
A32026-2          REMOVAL/INSTALLATION EQUIPMENT - TRUNNION PIN,
A32027−1          SUPERSEDED BY A32027−48
A32027−153        REPLACED BY A32027−166
A32027−153        SUPERSEDED BY A32027−176
A32027−165        SUPERSEDED BY A32027−177
A32027−166        SUPERSEDED BY A32027−178
A32027−174        REPLACED BY A32027−177
A32027−175        REPLACED BY A32027−178
A32027−176        REPLACED BY A32027−178
A32027−48         SUPERSEDED BY A32027−53
A32027−58         SUPERSEDED BY A32027−90
A32027−59         SUPERSEDED BY A32027−89
A32027−89         REPLACED BY A32027−165
A32027−89         SUPERSEDED BY A32027−174
A32027−90         REPLACED BY A32027−166
A32027−90         SUPERSEDED BY A32027−175
A32027-177        PUMP - RETRACTION/EXTENSION LANDING GEAR
A32027-178        PUMP - RETRACTION/EXTENSION LANDING GEAR
A32027-53         PUMP - RETRACTION/EXTENSION LANDING GEAR
A32028−1          REPLACED BY A32028−6
A32028-6          RETENTION STRAP - INNER CYL - MLG & NLG
A32029−1          SUPERSEDED BY A32029−48
A32029−48         REPLACED BY A32029−50
A32029-50         REPLACEMENT EQUIPMENT - LOWER SEAL, NOSE GEAR
A32030−1          SUPERSEDED BY A32030−4
A32030−12         REPLACED BY A32030−21
A32030−6          REPLACED BY A32030−18
A32030-10         LOCK - MAIN LANDING GEAR DOOR
A32030-18         LOCK - MAIN LANDING GEAR DOOR
A32030-21         LOCK - MAIN LANDING GEAR DOOR
A32030-4          LOCK - MAIN LANDING GEAR DOOR
A32031−1          SUPERSEDED BY A32031−4/−5 REPLACES −4
A32031-5          TURNBUCKLE - TRUCK POSITION ACTUATOR, MLG
A32032−1          SUPERSEDED BY A32032−38,−39
A32032−38         SUPERSEDED BY A32032−52
A32032−39/−52     REPLACED BY A32032−65/−64
A32032-64         REMOVAL/INSTALLATION EQUIPMENT - MLG
A32032-65         REMOVAL/INSTALLATION EQUIPMENT - MLG
A32033−1          SUPERSEDED BY A32033−17
A32033-17         SLING - MLG
A32034-1          WRENCH ADAPTER - STEERING NUT - NLG
A32035-1          WRENCH - STEERING ACTUATOR, NLG
A32036−1          REPLACED BY A32036−31
A32036−31         SUPERSEDED BY A32036−51
A32036−51         SUPERSEDED BY A32036−57
A32036−57         REPLACED BY A52009 FOR FUTURE PROCURMENT
A32036−57         SUPERSEDED BY A32036−66
A32036-43         HOIST EQUIPMENT - NLG, INSTALLATION & REMOVAL
A32036-66         HOIST EQUIPMENT - NLG, INSTALLATION & REMOVAL
A32037            CANCELLED
A32038-1          TRANSPORTATION DOLLY - NLG 757 AND 767
A32038-23         TRANSPORTATION DOLLY - NLG 757 AND 767
A32039-1          REMOVAL TOOL - MLG BOGIE PIVOT PIN
                                                                   www.sinters.ca
PART NUMBER                          DESCRIPTION
A32040−1      SUPERSEDED BY A32040−10
A32040-10     WRENCH - ROD END
A32040-12     WRENCH - ROD END
A32040-15     WRENCH - ROD END
A32040-4      WRENCH - ROD END
A32040-7      WRENCH - ROD END
A32041-1      TORQUE ADAPTER - CYLINDER, NLG RETRACT ACTUATOR
A32042-1      FIXTURE - FUNCTIONAL TEST, SIDE STRUT ASSY
A32043-1      TEST FIXTURE - ACTUATOR, M.L.G. DOOR LATCH
A32044−1      CANCELLED
A32045-*      WRENCHES - SPANNER
A32045−103    REPLACED BY A32045−105
A32045−103    SUPERSEDED BY A32045−112
A32045−105    SUPERSEDED BY A32045−114
A32045−112    REPLACED BY A32045−114
A32045−16     SUPERSEDED BY A32045−83
A32045−32     SUPERSEDED BY A32045−85
A32045−47     SUPERSEDED BY A32045−87
A32045−50     SUPERSEDED BY A32045−91
A32045−69     SUPERSEDED BY A32045−79
A32045−80     SUPERSEDED BY A32045−88
A32045−95     SUPERSEDED BY A32045−96
A32045−96     SUPERSEDED BY A32045−103
A32045−99     SUPERSEDED BY A32045−100
A32046−1      SUPERSEDED BY A32046−14
A32046−14     SUPERSEDED BY A32046−17
A32046-17     FISHPOLE HOIST ATTACH BRACKET - M.L.G. DOOR
A32047-1      COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT,
A32047-29     COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT,
A32049−1      CANCELLED
A32050-1      TORQUE FIXTURE - ACTUATOR PISTON, MAIN LANDING
A32051-1      COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT,
A32052-1      TEST FITTING - ACTUATOR, NLG STEERING
A32053-1      SPANNER WRENCH - RETAINING NUT, STEERING
A32054-1      PIN - ALIGNMENT, TRUCK AXLE BEAM, MLG
A32055-1      LOCATING JIG - SEQUENCE VALVE, MLG OPERATED
A32056−1      REPLACED BY B32050−50
A32056-1      STAND EQUIPMENT - MLG BUILDUP
A32057-1      BUILD-UP STAND - NOSE LANDING GEAR
A32057-10     BUILD-UP STAND - NOSE LANDING GEAR
A32057-40     BUILD-UP STAND - NOSE LANDING GEAR
A32058-1      HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING
A32059−1      SUPERSEDED BY A32059−13
A32059−14     SUPERSEDED BY A32059−27
A32059−15     SUPERSEDED BY A32059−27
A32059-13     HOLDING EQUIPMENT - ACTUATOR, MLG DOOR
A32059-27     HOLDING EQUIPMENT - ACTUATOR, MLG DOOR
A32060-1      TEST FIXTURE - ACTUATOR, WHEEL BRAKE
A32061-1      BACKLASH CHECK EQUIPMENT - NLG STEERING GEAR
A32063-7      TEST FIXTURE - SIDE AND DRAG BRACE LOCK
A32064-1      FIXTURE - TEST, MLG DOOR ARMING LOCKOUT
A32065-1      RESTRAINING WRENCH - MLG RETRACT ACTUATOR
A32066−1      REPLACED BY J32060−1
A32066-1      DRAIN EQPT - SHOCK STRUT-MLG/NLG
A32067−1      REPLACED BY A32067−11
A32067-11     PULLER EQPT - BUSHING, MLG BOGIE BEAM
A32067-13     PULLER EQPT - BUSHING, MLG BOGIE BEAM
A32067-24     PULLER EQPT - BUSHING, MLG BOGIE BEAM
A32068−1      SUPERSEDED BY A32068−7
A32068−7      REPLACED BY A32119−1
A32068-7      TEST STAND - TRUCK POSITIONER, MLG
A32069−1      REPLACED BY A32069−7
A32069-7      WRENCH ADAPTER - RETAINER NUT, ANTI-SKID
A32070-1      TORQUE ADAPTER - SNUBBER NUT
A32071-1      COMPRESSION TOOL - SPRING CARTRIDGE, NOSE WHEEL
A32071-28     COMPRESSION TOOL - SPRING CARTRIDGE, NOSE WHEEL
A32071-29     COMPRESSION TOOL - SPRING CARTRIDGE, NOSE WHEEL
A32072-1      FIXTURE - FUNCTIONAL TEST, NLG STEERING
A32073-1      RIGGING BAR - M.G. SIDE STRUT
A32074-1      BREAKOUT BOX - RELAY SYSTEM, AIR/GROUND
A32075−1      REPLACED BY A32075−10
A32075−9      REPLACED BY A32075−10
A32075-10     ADAPTER - ANTISKID TRANSDUCER SPIN-UP
A32076−1      SUPERSEDED BY A32076−5
A32076-5      CLAMP EQPT - PISTON ROD, MLG TRUCK POSITIONER
A32077-1      GAUGE - MLG DOOR, OPEN POSITION
A32078-1      ADAPTER SET - RETAINING NUT, ACTUATOR SIDE &
A32079-1      PULLER EQPT - BRAKE SLEEVE, MAIN LANDING GEAR
A32080-1      BRAKE DISCONNECT - FLIGHT DISPATCH
A32081-1      PLUG - BUSHING INSTALLATION, MLG BOGIE
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
A32082-1      GUIDE - PIVOT PIN, MAIN LANDING GEAR
A32083−1      SUPERSEDED BY A32083−12
A32083-12     AXLE PULLER - MAIN LANDING GEAR
A32084-1      HOLDING FIXTURE - PISTON ROD, NLG LOCK ACTUATOR
A32086-1      JIG - DOWNLOCK STOP SHIM ADJUSTMENT
A32087-1      FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT
A32088-7      MAINTENANCE LOCK - RETRACTABLE TAIL SKID
A32089-1      SWAGING FIXTURE - PISTON ROD, MAIN LANDING GEAR
A32090−1      SUPERSEDED BY A32090−10
A32090−10     SUPERSEDED BY A32090−14
A32090-14     HOIST EQUIPMENT - TAIL SKID SHOCK STRUT
A32091-*      HOLE SAW
A32092-1      GAGE EQUIPMENT - RIGGING, BRAKE QUADRANT,
A32093        CANCELLED
A32094-1      GAUGE - DOWN LOCK LINK ADJUSTMENT, NLG
A32095-1      WRENCH - BEARING RETAINING BOLT, MLG
A32096−1      SUPERSEDED BY A32096−10
A32096−10     SUPERSEDED BY A32096−70
A32096−18     REPLACED BY A32096−78
A32096-70     RIGGING EQPT - LANDING GEAR, AIR/GROUND SENSORS
A32096-86     RIGGING EQPT - LANDING GEAR, AIR/GROUND SENSORS
A32097-1      PROTECTOR EQPT - EXTERNALLY THREADED AXLE, NLG
A32098-1      PROTECTOR EQPT - AXLE, MAIN LANDING GEAR
A32098-12     PROTECTOR EQPT - AXLE, MAIN LANDING GEAR
A32099−1      SUPERSEDED BY A32099−25 −38
A32099−25     REPLACED BY A32099−38
A32099−25     SUPERSEDED BY A32099−78
A32099−38     REPLACED BY A32099−69 (767−400)
A32099−38     SUPERSEDED BY A32099−69 (767−200 & 767−300)
A32099−69     SUPERSEDED BY A32099−77
A32099-76     SPRING EXTENDER EQUIPMENT
A32099-77     SPRING EXTENDER EQUIPMENT
A32100-1      INSTALLATION EQPT - BRAKE SLEEVE, MLG
A32101-1      WRENCH ADAPTER - AXLE NUT, NLG
A32102        REPLACED BY A27092.
A32102−1      REPLACED BY A32102−13
A32102−13     SUPERSEDED BY A32102−25
A32102-25     ACTUATOR SET - PROXIMITY SENSOR
A32103-1      LOCKOUT PIN - FWD & AFT LOCK LINK, RETR TAIL
A32104-1      PULLED EQPT - FUSE PIN, FWD TRUNNION, MAIN
A32105-1      SLING EQPT - DRAG AND SIDE STRUT RMVL/INSTL,
A32106-1      SHOCK STRUT EQPT - COMPONENT MAINTENANCE, MLG
A32107-1      REPLACEMENT EQPT - LOWER BEARING SEALS, MLG
A32108-1      SLING EQUIPMENT - RETRACT ACTUATOR, MLG
A32108-2      SLING EQUIPMENT - RETRACT ACTUATOR, MLG
A32109−1      SUPERSEDED BY A32109−41
A32109-41     PIN INSTL/RMVL KIT - MAIN LANDING GEAR
A32110-1      PIN PULLER EQPT - BRAKE ROD, MAIN LANDING GEAR
A32111-1      RIGGING TUBE EQPT - SIDE STRUT, MLG
A32112-1      RML/INSTL GUIDE EQPT - AFT TRUNNION, MLG
A32113-1      PIN PULLER EQPT - RETRACT ACTUATOR MLG
A32114−1      SUPERSEDED BY A32114−64
A32114-64     TRUCK POSITION RETAINER & OLEO LOCK EQPT - MLG
A32115-1      OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN
A32115-2      OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN
A32115-6      OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN
A32116-1      REMOVAL EQUIPMENT - MLG BOGIE PIVOT PIN
A32117-1      LOCATING JIG - SEQUENCE VALVE, MLG OPERATED
A32118-1      FISHPOLE HOIST ATTACH BRACKET EQPT - MLG DOOR
A32119-1      TEST STAND ASSY - TRUCK POSITIONER, MLG
A32120-1      TORQUE ADAPTER SET - ACTUATOR COMPONENTS, MLG
A32121-1      FIXTURE EQPT - LANDING GEAR ACTUATOR ASSYS
A32122-1      FIXTURE EQUIPMENT - RETRACT ACTUATOR, MLG
A32123-1      RIGGING ASSY - AIR/GROUND SENSORS, RH MLG
A33001        TRANSFERRED TO BAE SYSTEMS
A33002        CANCELLED
A33002−1      SUPERSEDED BY A33002−36
A33003-*      BREAKOUT BOX - MULTIPURPOSE
A33003−1      SUPERSEDED BY A33003−359
A33003−342    SUPERSEDED BY A33003−367
A33003−343    SUPERSEDED BY A33003−368
A33004        TRANSFERRED TO BAE SYSTEMS
A33004−1      SUPERSEDED BY A33004−32
A34001−1      REPLACED BY A34001−4
A34001-4      WARNING EQUIP - ATC, DME, VHF ANTENNA AND DRAIN
A34003        TRANSFERRED TO BAE SYSTEMS
A34003−1      REPLACED BY A34003−43
A34003−43     REPLACED BY A34003−46
A34004        TRANSFERRED TO BAE SYSTEMS
A34004−1      SUPERSEDED BY A34004−24
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
A34004−24     SUPERSEDED BY A34004−27
A34004−27     REPLACED BY A34004−30
A34005        TRANSFERRED TO BAE SYSTEMS
A34006        TRANSFERRED TO BAE SYSTEMS
A34006−1      REPLACED BY A34006−21
A34007        TRANSFERRED TO BAE SYSTEMS
A34007−1      SUPERSEDED BY A34007−33
A34007−33     REPLACED BY A34007−36
A34008        TRANSFERRED TO BAE SYSTEMS
A34009        TRANSFERRED TO BAE SYSTEMS
A34009−1      SUPERSEDED BY A34009−22
A34009−22     SUPERSEDED BY A34009−24
A34009−24     SUPERSEDED BY A34009−26
A34009−26     SUPERSEDED BY A34009−29
A34009-29
A34010        TRANSFERRED TO BAE SYSTEMS
A34010−1      SUPERSEDED BY A34010−21
A34011−1      REPLACED BY A34016
A34011−112    REPLACED BY A34016
A34011−119    REPLACED BY −165
A34011-1      BREAKOUT BOX EQUIPMENT - ARINC 600, LINE
A34011-112    BREAKOUT BOX EQUIPMENT - ARINC 600, LINE
A34011-165    BREAKOUT BOX EQUIPMENT - ARINC 600, LINE
A34012        REPLACED BY J34002
A34012−1      REPLACED BY A34012−24
A34012-19     TEST FIXTURE - ANGLE OF ATTACK
A34012-24     TEST FIXTURE - ANGLE OF ATTACK
A34013        TRANSFERRED TO BAE SYSTEMS
A34013−1      REPLACED BY A34013−18
A34014        TRANSFERRED TO BAE SYSTEMS
A34014−1      SUPERSEDED BY A34014−14
A34015−1      SUPERSEDED BY A34015−10
A34015−10     SUPERSEDED BY A34015−13
A34015−13     SUPERSEDED BY A34015−16
A34015−16     SUPERSEDED BY A34015−20
A34015−20     REPLACED BY A34015−23
A34015−20     SUPERSEDED BY A34015−26
A34015−23     SUPERSEDED BY A34015−27
A34015−26     REPLACED BY A34015−35
A34015−27     REPLACED BY A34015−35
A34015-35     TEST BOX - POWER INTERRUPT
A34016-*      BREAKOUT BOX EQUIPMENT - ARINC 600, LINE
A35001        REPLACED BY C35003
A35001−1      SUPERSEDED BY A35001−10
A35001-10     RETRACTION EQUIPMENT - FIRING PIN, OXYGEN
A35002−1      SUPERSEDED BY A35002−7
A35002−7      REPLACED BY A35002−10
A35002-10     DOOR RETAINER - PSU OXY
A36001−1      REPLACED BY A36001−45
A36001−11     REPLACED BY A36001−44
A36001−24     REPLACED BY A36001−44
A36001-44     REM/INSTL EQPT - ENGINE PRECOOLER
A36001-45     REM/INSTL EQPT - ENGINE PRECOOLER
A36001-51     REM/INSTL EQPT - ENGINE PRECOOLER
A36002        CANCELLED
A36003−1      SUPERSEDED BY A36003−125
A36003−125    SUPERSEDED BY A36003−135
A36003−135    SUPERSEDED BY A36003−173
A36003-173    PLUG SET - PNEUMATIC DUCTS HYDROSTATIC PRESSURE
A36004−1      SUPERSEDED BY A36004−15
A36004-15     INSTALLATION EQPT - CF6-80C2B BALL JOINT
A36004-20     INSTALLATION EQPT - CF6-80C2B BALL JOINT
A36005−1      REPLACED BY A36005−15
A36005-15     HOLD OPEN EQUIPMENT - PRESS. RGLTR. SHUT OFF
A36006-1      DUMMY CHECK VALVE - I.P. PNEUMATIC SYS,
A36007-1      TEST EQPT - IP DUMMY CHECK VALVE
A36008-1      PRESSURE TEST EQPT - DUCT ASSY
A36009-1      PRESSURE TEST EQPT - DUCT ASSY
A36010-1      PRESSURE TEST EQPT - DUCT ASSY
A36011−24     REPLACED BY A35001−45
A36011-1      PRESSURE TEST EQPT.
A36012-1      PRESSURE TEST EQPT - DUCT ASSY
A36013-1      PRESSURE TEST EQPT - DUCT ASSY
A36014-1      PRESSURE TEST EQPT - DUCT ASSY
A36015-1      PRESSURE TEST EQPT - DUCT ASSY
A36016-1      PRESSURE TEST PLUG - DUCT ASSY
A36017-1      PLUG -DUCT, PROOF PRESSURE TEST
A36018-1      PLUG EQPT - DUCT, PROOF PRESSURE TEST
A36019-1      PLUG EQPT - DUCT, PROOF PRESSURE TEST
A36020-1      PLUG EQPT - DUCTS, PROOF PRESSURE TEST
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
A36021-1      ADAPTER CABLE - BITE MODULE, AIR SUPPLY SYSTEM
A36022-1      REMOVAL/INSTALLATION EQPT - RB211 PRECOOLER
A38001−1      REPLACED BY A38001−16
A38001−16     REPLACED BY A38001−22
A38001−25     SUPERSEDED BY A38001−68
A38001-22     VACUUM TEST EQPT - VACUUM WASTE SYSTEM
A38001-65     VACUUM TEST EQPT - VACUUM WASTE SYSTEM
A38001-68     VACUUM TEST EQPT - VACUUM WASTE SYSTEM
A38002        TRANSFERRED TO BAE SYSTEMS
A38003−1      SUPERSEDED BY A38003−14
A38003−14     SUPERSEDED BY A38003−20
A38003-20     BLOCKAGE REMOVER - VACUUM TOILET
A38004        REPLACED BY A38009
A38004−1      REPLACED BY A38004−5
A38004−15     SUPERSEDED BY A38004−29
A38005-1      ROOTER - WASTE WATER DRAIN LINE
A38005-7      ROOTER - WASTE WATER DRAIN LINE
A38006-1      TESTER - TOILET VACUUM
A38007-1      PLUG, VACUUM WASTE SYSTEM
A38008        CANCELLED
A38008        REPLACED BY A38003−14
A38009-1      SENSOR CLEANER - LAVATORY WASTE TANK
A38009-11     SENSOR CLEANER - LAVATORY WASTE TANK
A38010−1      REPLACED BY A38010−11
A38010-11     TEST CABLE - POTABLE WATER QUANTITY XMTR
A38011−1      REPLACED BY C38001
A38011-1      PLUG EQPT - DRAIN MAST, WASTE WATER
A38011-2      PLUG EQPT - DRAIN MAST, WASTE WATER
A38012−1      REPLACED BY A38012−31
A38012−18     REPLACED BY A38012−32
A38012−31     REPLACED BY A38012−39
A38012−32     REPLACED BY A38012−40
A38012-39     PUMP EQPT - VACUUM LAV SYSTEM
A38012-40     PUMP EQPT - VACUUM LAV SYSTEM
A38014-1      DOOR SWITCH ACTUATOR - POTABLE WATER SERIVCE
A49001−1      SUPERSEDED BY A49001−64
A49001−2      SUPERSEDED BY A49001−73
A49001−3      REPLACED BY A49001−17
A49001−73     REPLACED BY A49001−83
A49001−77     SUPERSEDED BY A49001−78
A49001-17     CRADLE - APU
A49001-78     CRADLE - APU
A49001-83     CRADLE - APU
A49001-84     CRADLE - APU
A49002-1      LIFTING EYE - GENERATORS AND STARTERS
A49002-2      LIFTING EYE - GENERATORS AND STARTERS
A49003−1      REPLACED BY A49003−12
A49003−78     REPLACED BY A49003−84
A49003-12     TRANSPORTATION DOLLY - AUXILIARY POWER UNIT
A49004-1      SUPPORT EQUIP - APU
A49005-12     SLING - APU SHOP HANDLING
A49006−1      SUPERSEDED BY A49006−25
A49006−26     REPLACED BY A24006−1
A49007−1      SUPERSEDED BY A49007−5
A49007−5      SUPERSEDED BY A49007−8
A49007-8      COMPRESSOR CLEANER - APU
A49009-1      KIT - APU DEACTIVATION
A51001−1      SUPERSEDED BY A51001−19
A51001-19     SERVICE PLATFORM FWD OF APU FIREWALL
A51002-1      ALIGNMENT EQPT - AIRPLANE STRUCTURAL REPAIR
A51003        SUPERSEDED BY A51004
A51004-1      LADDER SET - EMPENAGE, PRESSURE DOME
A51005−1      SUPERSEDED BY A51005−14
A51005-14     OIL CAN GAGE - PRESSURE BULKHEAD
A51006−1      SUPERSEDED BY A51006−21
A51006−21     SUPERSEDED BY A51006−26
A51006-26     MEASUREMENT EQPT - CHECK, SKIN SMOOTHNESS
A51007-1      MAINT PLATFORM EQPT - PRESSURE BULKHEAD ACCESS
A52001−1      CANCELLED
A52002−1      REPLACED BY A52002−13
A52002-13     SAFETY BARRIER - ENTRY, MID-ENTRY OR SERVICE
A52003-1      LOCK - COUNTERBALANCE ENTRY AND SERVICE DOORS
A52004−1      SUPERSEDED BY A52004−41
A52004−1      SUPERSEDED BY A52004−43
A52004−10     SUPERSEDED BY A52004−42
A52004−17     SUPERSEDED BY A52004−43
A52004−18     SUPERSEDED BY A52004−44
A52004−19     SUPERSEDED BY A52004−45
A52004−20     SUPERSEDED BY A52004−46
A52004−21     SUPERSEDED BY A52004−47
                                                               www.sinters.ca
PART NUMBER                          DESCRIPTION
A52004−40     SUPERSEDED BY A52004−41
A52004-41     SLING EQUIPMENT - DOOR HANDLING
A52004-42     SLING EQUIPMENT - DOOR HANDLING
A52004-43     SLING EQUIPMENT - DOOR HANDLING
A52004-44     SLING EQUIPMENT - DOOR HANDLING
A52004-45     SLING EQUIPMENT - DOOR HANDLING
A52004-46     SLING EQUIPMENT - DOOR HANDLING
A52004-47     SLING EQUIPMENT - DOOR HANDLING
A52005−1      REPLACED BY A52005−18
A52005-1      SAFETY BARRIER - CARGO DOOR, FORWARD OR AFT
A52005-18     SAFETY BARRIER - CARGO DOOR, FORWARD OR AFT
A52006-1      REPLACEMENT EQUIP - BULK CARGO DOOR
A52007-1      SAFETY BARRIER - FORWARD LARGE CARGO DOOR
A52008−1      SUPERSEDED BY A52008−3
A52008−10     SUPERSEDED BY A52008−14
A52008−3      SUPERSEDED BY A52008−10
A52008-14     GROUND LOCK - ENTRY/SERVICE DOOR
A52009-22     TEST FIXTURE - BUNGEE SPRING, CARGO DOOR
A52010−1      SUPERSEDED BY A52010−14
A52010−1      SUPERSEDED BY A52010−15
A52010−14     SUPERSEDED BY A52010−50
A52010−15     SUPERSEDED BY A52010−51
A52010-49     CLAMP EQUIPMENT - SPRING INSTL/REMOVAL, BULK
A52010-50     CLAMP EQUIPMENT - SPRING INSTL/REMOVAL, BULK
A52010-51     CLAMP EQUIPMENT - SPRING INSTL/REMOVAL, BULK
A52011−1      CANCELLED
A52012−1      REPLACED BY A52014−1
A52013−1      SUPERSEDED BY A52013−31
A52013-31     DUMMY WEIGHT SLIDE PACK - PASSENGER & SERVICE
A52014-1      ADJUSTMENT SET - MAIN LATCH PIN, LARGE FWD
A52015-3      SHAFT SUPPORT - COUNTERBALANCE, OVERHEAD
A52016-1      RIGGING ADJUSTMENT EQPT - FWD & AFT CARGO DOORS
A52017-1      TEST FIXTURE - GEARBOX, OVHD PASS. DOOR
A52018−1      SUPERSEDED BY A52018−15
A52018-15     TEST EQPT - LATCH LOCK, LARGE CARGO DOOR
A52019-1      DRIVER SET - HINGE PIN LARGE CARGO DOOR
A52019-13     DRIVER SET - HINGE PIN LARGE CARGO DOOR
A52020-1      MANDREL EQPT - BEARING INSTL
A52021-1      WRENCH - PROXIMITY SENSOR, BULK CARGO DOOR
A52022-1      CANOPY - FORWARD ENTRY DOOR
A52023-1      BACKLASH CHECK EQPT - MANUAL DRIVE, LARGE CARGO
A52024        CANCELLED
A52025-1      SERVICE PLATFORM - SERVICE ACCESS DOOR
A52027-1      SAFETY BARRIER - AFT EMERGENCY EXIT
A52028-1      VERIFICATION EQPT - MAIN LATCH FTGS, LARGE
A52029-1      GAGE - GIRT BAR, CARRIER DRIVE
A52030-1      STAKING EQPT - GIRT BAR BEARING
A52031-1      RIGGING EQPT - MAIN DECK CARGO DOOR
A52032−1      SUPERSEDED BY A52032−17
A52032-17     ADJUSTMENT TOOL SET - LATCH PINS, MAIN DECK
A52033-1      VERIF EQPT - MAIN LATCH FITTINGS, MAIN DECK
A52034-1      RIGGING EQPT - ROTARY ACTR, MAIN DECK CARGO
A52035-1      DRIVER EQPT - INTMD HINGE PINS, MAIN DECK CARGO
A52036-1      SLING EQUIPMENT - MAIN DECK CARGO DOOR
A52037        TRANSFERRED TO BAE SYSTEMS
A52037        TRANSFERRED TO BAE SYSTEMS
A53001−1      SUPERSEDED BY A53001−14
A53001-14     SLING - RADOME
A53002−1      SUPERSEDED BY A53002−5
A53002-5      BARRIER - SAFETY, E/E ACCESS BAY.HATCH
A54001−1      SUPERSEDED BY A54001−34
A54001−102    SUPERSEDED BY A54001−112
A54001−112    SUPERSEDED BY A54001−136
A54001−119    SUPERSEDED BY A54001−138
A54001−120    SUPERSEDED BY A54001−137
A54001−136    SUPERSEDED BY A54001−165
A54001−137    SUPERSEDED BY A54001−166
A54001−138    SUPERSEDED BY A54001−167
A54001−157    SUPERSEDED BY A54001−168
A54001−165    REPLACED BY A54001−168
A54001−2      SUPERSEDED BY A54001−33
A54001−25     REPLACED BY A54001−36
A54001−25     SUPERSEDED BY A54001−76
A54001−33     SUPERSEDED BY A54001−74
A54001−34     REPLACED BY A54001−35
A54001−34     SUPERSEDED BY A54001−44
A54001−35     SUPERSEDED BY A54001−44
A54001−36     SUPERSEDED BY A54001−44
A54001−42     SUPERSEDED BY A54001−44
A54001−44     SUPERSEDED BY A54001−75
                                                                www.sinters.ca
PART NUMBER                               DESCRIPTION
A54001−74         SUPERSEDED BY A54001−102
A54001−76         SUPERSEDED BY A54001−103
A54001-166        SLING EQPT - STRUT UNLOAD, PIN
A54001-167        SLING EQPT - STRUT UNLOAD, PIN
A54001-168        SLING EQPT - STRUT UNLOAD, PIN
A54001-57         SLING EQPT - STRUT UNLOAD, PIN
A54002−1          SUPERSEDED BY A54002−9
A54002-19         DRILL JIG - SIDE LINK, NACELLE STRUT
A54002-9          DRILL JIG - SIDE LINK, NACELLE STRUT
A54003−1          REPLACED BY A54003−51
A54003−2          SUPERSEDED BY A54003−41
A54003−3          SUPERSEDED BY A54003−42
A54003-41         SLING EQPT - STRUT REMOVAL AND INSTALLATION
A54003-42         SLING EQPT - STRUT REMOVAL AND INSTALLATION
A54003-51         SLING EQPT - STRUT REMOVAL AND INSTALLATION
A54004−1          SUPERSEDED BY A54004−19
A54004−19         SUPERSEDED BY A54004−27
A54004−27         REPLACED BY J54001 OR G54007
A54004-27         PRELOAD EQPT, STRUT INSTL
A54005            A54012 SUPERSEDES A54005
A54005-10         SLING EQPT - RB211-524H, STRUT
A54005-11         SLING EQPT - RB211-524H, STRUT
A54007−1          SUPERSEDED BY −15,A54007 REPLACED BY J54001
A54007-15         SLING - DIAGONAL BRACE UNLOAD/RB211-524 ENGINE
A54008            REPLACED BY A54011
A54008−1          REPLACED BY A54008−13
A54008-13         PULLER EQPT - FUSE PIN
A54009-1          PROOFLOAD FIXTURE RB211-524H STRUT SLING
A54011−1          SUPERSEDED BY A54011−13
A54011−13         SUPERSEDED BY A54011−18
A54011-18         REMOVAL/INSTL KIT - MIDSPAR FUSE PIN
A54011-24         REMOVAL/INSTL KIT - MIDSPAR FUSE PIN
A54011-25         REMOVAL/INSTL KIT - MIDSPAR FUSE PIN
A54011-26         REMOVAL/INSTL KIT - MIDSPAR FUSE PIN
A54012−1          A54012−1 SUPERSEDES A54005−1
A54012-1          SLING EQPT - STRUT, RB211-54H
A55001−1          SUPERSEDED BY A55001−19
A55001−19         REPLACED BY A55001−22
A55001−34         SUPERSEDED BY A55001−42
A55001−42         SUPERSEDED BY A55001−47
A55001-22         LOCK EQUIPMENT - HORIZONTAL STABILIZER
A55001-47         LOCK EQUIPMENT - HORIZONTAL STABILIZER
A55002-1          WRENCH - RETAINER NUT, BUSHING, ELEVATOR HINGE
A55003-1          ALIGNMENT EQPT - HINGE, INBOARD ELEVATOR
A55004−1          REPLACED BY A55004−40
A55004−40         SUPERSEDED BY A55004−44
A55004−44         SUPERSEDED BY A55004−73
A55004−73         SUPERSEDED BY A5504−83
A55004−95         SUPERSEDED BY A55004−98
A55004-98         JACKING EQUIPMENT - HINGE, HORIZ STAB
A55005-1          REMOVAL EQUIPMENT - PIVOT BEARING, HORIZONTAL
A55006-1          TEMPLATE - BLADE SEAL FITTING, HORIZONTAL
A55007            REPLACED BY A27114
A55007-1          REMOVAL/INSTL EQPT - PIVOT BEARING HORIZ
A56001−1          SUPERSEDED BY A56001−15
A56001-15         SLING SET - NUMBER 1 & 3, CONTROL CAB WINDOWS
A56002−1          CANCELLED
A56004−49         SUPERSEDED BY A56004−50
A56004−50         SUPERSEDED BY A56004−60
A56004-60         REPAIR SET - #2 WINDOW
A57001-1          JIG EQUIPMENT - REAMING, TRUNNION SUPPORT, MLG
A57002-1          REPLACEMENT EQPT - WEDGE, OUTBD T.E. FLAP
A57003-1          LOCATING EQPT - WEDGE REPLACEMENT, INBD/ OUTBD
A57004-1          SLING - RAKED WING TIP, INSTALLATION & REMOVAL
A57005-1          SOCKET ASSEMBLY - RETENTION NUT, MLG ACTUATOR
A57006-1          SPANNER WRENCH - SPECIAL NUT, INBOARD T.E. MAIN
A57007−1          SUPERSEDED BY A57007−8
A57007-8          LUBRICATING EQPT - LE SLAT AUXILIARY ARM ROLLER
A57008-1          REM/INSTL EQPT - MLG BOTTLE PIN
A71001−1          SUPERSEDED BY A71001−100
A71001−100        SUPERSEDED BY A71001−115
A71001−115        SUPERSEDED BY A71001−128
A71001−128        SUPERSEDED BY A71001−168
A71001−168        SUPERSEDED BY A71001−179
A71001−179        SUPERSEDED BY A71001−182
A71001−182        SUPERSEDED BY A71001−185
A71001−185        SUPERSEDED BY A71001−191
A71001−242/−243   SUPERSEDED BY A71001−262/−263
A71001−27         REPLACED BY A71001−39
A71001-191        BOOTSTRAP EQUIPMENT - P&W ENGINES
                                                                    www.sinters.ca
PART NUMBER                               DESCRIPTION
A71002−1          REPLACED BY A71002−22
A71002−22         SUPERSEDED BY A71002−26
A71002−26         SUPERSEDED BY A71002−34
A71002−34         SUPERSEDED BY A71002−44
A71002−48         SUPERSEDED BY A71002−50
A71002-50         SLING EQPT - THRUST REVERSER - JT9D-7R4D AND
A71003−10         REPLACED BY A71003−18
A71003−15         SUPERSEDED BY A71003−22
A71003−18         SUPERSEDED BY A71003−20
A71003−20         SUPERSEDED BY A71003−25
A71003−22         REPLACED BY A71003−27
A71003−26         SUPERSEDED BY A71003−41
A71003−27         SUPERSEDED BY A71003−40
A71003−8          REPLACED BY A71003−15
A71003-52         TORQUE EQUIPMENT - ENGINE MOUNTS, JT9D-7R4D &
A71003-53         TORQUE EQUIPMENT - ENGINE MOUNTS, JT9D-7R4D &
A71003-54         TORQUE EQUIPMENT - ENGINE MOUNTS, JT9D-7R4D &
A71005−25         REPLACED BY A71005−31
A71005−31         SUPERSEDED BY A71005−33
A71005-33         SLING EQUIPMENT - ENGINE INLET COWL
A71006−1          REPLACED BY A71006−58
A71006−76         SUPERSEDED BY A71006−79
A71006-79         CRADLE - P&W ENGINES, 90 INCH RAIL
A71007−1          SUPERSEDED BY A71007−23
A71007−23         SUPERSEDED BY A71007−27
A71007-39         PROOF LOAD FIXTURE - BOOTSTRAP, P&W ENGINES
A71008−1          REPLACED BY A71008−64
A71008-64         SLING EQUIPMENT - P/W ENGINES
A71008-65         SLING EQUIPMENT - P/W ENGINES
A71008-66         SLING EQUIPMENT - P/W ENGINES
A71009-26         SLING - THRUST REVERSER CF6-80A
A71010−1          SUPERSEDED BY A71030−1
A71010−1          SUPERSEDED BY A71032−1
A71011−1          REPLACED BY A71011−90
A71011−102        SUPERSEDED BY A71011−112
A71011−112        SUPERSEDED BY A71011−123
A71011−183        SUPERSEDED BY A71011−242
A71011−236        SUPERSEDED BY A71011−243
A71011−242/−243   SUPERSEDED BY A71011−262/−263
A71011−90         SUPERSEDED BY A71011−102
A71011-262        BOOTSTRAP EQUIPMENT - G.E. ENGINE
A71011-263        BOOTSTRAP EQUIPMENT - G.E. ENGINE
A71012−1          SUPERSEDED BY A71012−35
A71012-35         PROOF LOAD EQUIPMENT - CRADLE, P&W ENGINES
A71013−1          REPLACED BY A71013−32
A71013−32         REPLACED BY A71013−55
A71013−55         REPLACED BY A71013−70
A71013−55         REPLACED BY A71013−82
A71013−70         SUPERSEDED BY A71013−82
A71013-19         HOIST ADAPTER - INTEGRATED DRIVE GENERATOR
A71013-32         HOIST ADAPTER - INTEGRATED DRIVE GENERATOR
A71013-40         HOIST ADAPTER - INTEGRATED DRIVE GENERATOR
A71013-45         HOIST ADAPTER - INTEGRATED DRIVE GENERATOR
A71013-82         HOIST ADAPTER - INTEGRATED DRIVE GENERATOR
A71013-88         HOIST ADAPTER - INTEGRATED DRIVE GENERATOR
A71014            CANCELLED
A71014−1,−26      REPLACED BY A36001−1,−24
A71015−1          REPLACED BY A71015−48
A71015−48         SUPERSEDED BY A71015−60
A71015−60         SUPERSEDED BY A71015−63
A71015−63         SUPERSEDED BY A71015−66
A71015−66         SUPERSEDED BY A71015−67
A71015−67         SUPERSEDED BY A71015−79
A71015−79         SUPERSEDED BY A71015−87
A71015−87         SUPERSEDED BY A71015−93
A71015−93         SUPERSEDED BY A71015−107
A71015-107        LIFT FIXTURE - ENGINE ACCESSORY
A71016-1          SLING EQUIPMENT - CORE COWL
A71016-23         SLING EQUIPMENT - CORE COWL
A71017-1          LIFT SLING - CORE COWL
A71018            CANCELLED
A71018−1          SUPERSEDED BY A71026−1/A71033−1
A71019            REPLACED BY G71010−1
A71019−1          SUPERSEDED BY A71019−60
A71020-1          PROOF LOAD FIXTURE - CRADLE, CF6-80A ENGINE
A71021−1          SUPERSEDED BY A71021−27
A71021−27         SUPERSEDED BY A71021−36
A71021−36         SUPERSEDED BY A71021−52
A71021-52         PROOF LOAD FIXTURE - BOOTSTRAP, G.E. ENGINE
A71022-1          LOCATING JIG - EBU TO STRUT, SYSTEMS INTERFACES
                                                                    www.sinters.ca
PART NUMBER                             DESCRIPTION
A71022-60       LOCATING JIG - EBU TO STRUT, SYSTEMS INTERFACES
A71023-53       CRADLE - CF6-80A ENGINE, 90 INCH RAIL
A71023-56       CRADLE - CF6-80A ENGINE, 90 INCH RAIL
A71024−1        REPLACED BY A71024−68
A71024−51       REPLACED BY A71024−70
A71024-68       LOCATING JIG - EBU TO STRUT, SYSTEMS INTERFACES
A71024-70       LOCATING JIG - EBU TO STRUT, SYSTEMS INTERFACES
A71025-1        SUPPORT PEDESTAL EQPT - CF6-80A ENGINE BUILD-UP
A71026-1        HOLD OPEN EQPT - 40 KNOTS, CF6-80A FAN COWL
A71027-1        HOLD OPEN EQPT - FAN COWL, 20 KNOTS, CF6-80A
A71029−1        SUPERSEDED BY A71029−36
A71029-36       HOLD OPEN EQPT - FAN COWL-20 KNOTS (P&W)
A71030−1        SUPERSEDED BY A71030−32
A71030-32       HOLD OPEN EQPT - FAN COWL 40 KNOTS (P&W
A71031-1        ASPIRATOR - TT2 PROBE, JT9D-7R4D ENGINE
A71032−1        SUPERSEDED BY A71032−14
A71032-14       HOLD OPEN EQPT - 40 KNOTS P&W CORE COWLS
A71033−19       SUPERSEDED BY A71033−31
A71033-31       HOLD OPEN EQPT - 40 KNOTS, CF6-80A CORE COWL
A71034−2        REPLACED BY A27034−3 FOR FUTURE PROCUREMENT
A71034-1        WRENCH - AFT FLIGHT MOUNT EBU "B" PACKAGE
A71034-3        WRENCH - AFT FLIGHT MOUNT EBU "B" PACKAGE
A71035−13       REPLACED BY A71035−27
A71035-1        COVER EQPT - BLEED VALVE, G.E. ENGINE
A71035-27       COVER EQPT - BLEED VALVE, G.E. ENGINE
A71036-1        MONITORING ASSEMBLY - BREATHER PRESSURE, JT9D-
A71037-1        TEST EQUIPMENT - DRYING & LEAK CHECK, JT9D-7R4D
A71038-1        ALIGNMENT HANDLE - FWD ENGINE MOUNT
A71040-*        SPECIFICATION - FLUSH CART, ENGINE IDG COOLING
A71042−1        REPLACED BY A71042−29
A71042-29       GUARD - INLET, ENGINE RUN-UP
A71043          CANCELLED
A71043          SUPERSEDED BY A36005
A71044          CANCELLED
A71044-1        TRIM EQUIPMENT - PW ENGINES (CANCELED)
A71044-7        TRIM EQUIPMENT - PW ENGINES (CANCELED)
A71045-1        STORAGE STAND - SPARE ENGINE CARRIAGE
A71046-1        LOCATING JIG - EBU TO STRUT, SYSTEMS PW4000
A71047−1        SUPERSEDED BY A71047−142
A71047−142      SUPERSEDED BY A71047−150
A71047-150      BOOTSTRAP EQPT - RB211-524H
A71048-1        PROOF LOAD FIXTURE - BOOTSTRAP, RB211 ENGINE
A71049-1        PT2 PROBE ADAPTER
A71050-1        HOLD OPEN BRACKET - JT9D ENGINE
A71051-1        TRANSPORTATION & STORAGE PALLET - INLET COWL,
A71054-1        TORQUE EQUIPMENT - ENGINE MOUNT BOLTS, RB211-
A73001-1        TEST CABLE - ELECTRONIC ENGINE CONTROL JT9D-
A73002−1        SUPERSEDED BY A73002−10
A73002-10       WRENCH - MAIN ENGINE CONTROL, CF6-80C2,
A76001-1        TEST FIXTURE - THRUST LEVER, CONTROL STAND
A77001          TRANSFERRED TO BAE SYSTEMS
A77002          TRANSFERRED TO BAE SYSTEMS
A77003−1        SUPERSEDED BY A77003−15
A77003−10       SUPERSEDED BY A77003−28
A77003−15       SUPERSEDED BY A77003−18
A77003−28       SUPERSEDED BY A77003−34
A77003-18       TEST EQPT - INDICATING SYSTEM, EXHAUST GAS
A77003-38       TEST EQPT - INDICATING SYSTEM, EXHAUST GAS
A77004−1        SUPERSEDED BY A77004−18
A77004−2        SUPERSEDED BY A77004−19
A77004−37       SUPERSEDED BY A77005−60
A77004-18       TEST BOX - TACHOMETER SYSTEM
A77004-19       TEST BOX - TACHOMETER SYSTEM
A77005−1/−24    SUPERSEDED BY A77005−58/−59
A77005−37/−52   SUPERSEDED BY A77005−60/−61
A77005−58       DELETED, USE A77004−18 INSTEAD
A77005-59       TEST EQPT - ENGINE N1 & N2 INTERFACE
A77005-60       TEST EQPT - ENGINE N1 & N2 INTERFACE
A77005-61       TEST EQPT - ENGINE N1 & N2 INTERFACE
A78001−1        SUPERSEDED BY A78001−11
A78001−11       REPLACED BY A78001−21
A78001−21       REPLACED BY A78001−30
A78001−21       SUPERSEDED BY A78001−30
A78001−22       REPLACED BY A78001−31
A78001−30       SUPERSEDED BY A78001−41 WITH PW4000 SERIES
A78001−41       SUPERSEDED BY A78001−48
A78001-31       HOLD OPEN EQPT- THRUST REVERSER, 40 KNOT
A78001-48       HOLD OPEN EQPT- THRUST REVERSER, 40 KNOT
A78002−4        SUPERSEDED BY A78002−8
A78002-1        THREAD PROTECTOR EQPT - THRUST REVERSER
                                                                  www.sinters.ca
PART NUMBER                          DESCRIPTION
A78002-8      THREAD PROTECTOR EQPT - THRUST REVERSER
A78002-9      THREAD PROTECTOR EQPT - THRUST REVERSER
A78003−28     REPLACED BY A78003−32
A78003−28     REPLACED BY A78003−41
A78003−32     SUPERSEDED BY A78003−35
A78003−35     SUPERSEDED BY A78003−38
A78003−38     SUPERSEDED BY A78003−41
A78003-41     CRADLE - EXHAUST NOZZLE
A78003-42     CRADLE - EXHAUST NOZZLE
A78005−1      SUPERSEDED BY A78005−5
A78005-5      TENSION LATCH WRENCH SET - FAN DUCT
A78007-1      SLING - SLEEVE, THRUST REVERSER, CF6-80A
A78008−1      REPLACED BY A78008−16
A78008-16     SLING - SLEEVE, THRUST REVERSER
A78010-1      CHECK FIXTURE - SPRING, INTERLOCK BELLCRANK,
A78011*       SUPERSEDED BY A78011−69/−70
A78011−1      SUPERSEDED BY A78011−63
A78011−2      SUPERSEDED BY A78011−64
A78011−63     REPLACED BY A78011−67
A78011−63     SUPERSEDED BY A78011−69
A78011−64     REPLACED BY A78011−68
A78011−64     SUPERSEDED BY A78011−70
A78011−67     SUPERSEDED BY A78011−69
A78011−68     SUPERSEDED BY A78011−70
A78011-69     STAND SUPPORT - FAN DUCT COWL & THRUST REVERSER
A78011-70     STAND SUPPORT - FAN DUCT COWL & THRUST REVERSER
A78012-1      WRENCH - CROWFOOT, TUBING NUT, FLOW CONTROL,
A78013-1      SLING - EXHAUST SLEEVE, ENGINE
A78013-11     SLING - EXHAUST SLEEVE, ENGINE
A78013-2      SLING - EXHAUST SLEEVE, ENGINE
A78014-1      CLAM SHELL EQPT - TRACK SLIDER, THRUST REVERSER
A78015-1      REWORK JIG - HINGE, BLOCKER DOORS, THRUST
A78017-1      SLING - FAN REVERSER OPENING
A78018−1      SUPERSEDED BY A78018−11
A78018-11     SLING - THRUST REVERSER TRANSLATING SLEEVE,
A78019−1      SUPERSEDED BY A78019−17
A78019-21     HAND PUMP - OPENING SYSTEM, THRUST REVERSER
A78020−1      REPLACED BY A78020−66
A78020-66     HOIST EQPT - REMOVAL/INSTALLATION, INA
A78021−1      REPLACED BY A78021−31
A78021−1      SUPERSEDED BY A78021−45
A78021−31     SUPERSEDED BY A78021−46
A78021−45     SUPERSEDED BY A78021−46
A78021-46     TEST/OVERHAUL EQPT - COWL DOOR ACTUATOR
A78023−35     SUPERSEDED BY A78023−89
A78023-1      REPAIR FIXTURE EQPT - PW4000 ENGINE THRUST
A78023-121    REPAIR FIXTURE EQPT - PW4000 ENGINE THRUST
A78023-89     REPAIR FIXTURE EQPT - PW4000 ENGINE THRUST
A78024-1      ALIGNMENT FIXTURE - INNER FAN DUCT WALL CF6-80A
A78025−1      SUPERSEDED BY A78025−93
A78025−2      SUPERSEDED BY A78025−77
A78025-77     BREAKOUT BOX- TEST, THRUST REVERSER
A78025-93     BREAKOUT BOX- TEST, THRUST REVERSER
B20004−1      REPLACED BY B20004−13
B20004−13     SUPERSEDED BY B20004−16
B20004−16     SUPERSEDED BY B20004−21
B20004-21     LEVERAGE ADAPTER EQPT - ACCESS PANEL
B20005        CANCELLED
B20005−1      REPLACED BY B20005−11
B20005−1      REPLACED BY B20005−12
B20005−1      REPLACED BY B20005−13
B20005−1      SUPERSEDED BY B20005−52
B20005−11     SUPERSEDED BY B20005−40
B20005−12     SUPERSEDED BY B20005−41
B20005−13     SUPERSEDED BY B20005−42
B20005−40     SUPERSEDED BY B20005−51
B20005−51     SUPERSEDED BY B20005−68
B20005−68     SUPERSEDED BY B20005−75
B20005-41     TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER
B20005-52     TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER
B20005-82     TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER
B21001        CLAMP - RELIEF VALVE HOLD OPEN, UNPRESSURIZED
B21003        JUMPER TEST WIRE - ENGINE SPEED CARD (ENGINE
B21003-1      JUMPER TEST WIRE
B21003-1      JUMPER TEST WIRE - ENGINE SPEED CARD (ENGINE
B21004        TEST EQUIPMENT - CABIN PRESSURE LEAK CHECK
B21004        CANCELLED
B21004        CANCELLED
B21004−15     REPLACED BY A38011−2
B21004−15     REPLACED BY C38001
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
B21004−79     SUPERSEDED BY B21004−86
B21004−91     REPLACED BY A38011−1
B21005−1      REPLACED BY B21005−10
B21005-10     CLEANING WAND EQPT - HEAT EXCHANGER
B22001-1      JIG EQPT - AUTO THROTTLE
B22002        TRANSFERRED TO BAE SYSTEMS
B22003        REPLACED BY G22003
B22003−1      SUPERSEDED BY B22003−20
B22003−20     SUPERSEDED BY B22003−39
B22003-39     TEST EQPT - AUTOTHROTTLE CLUTCH
B23001        TRANSFERRED TO BAE SYSTEMS
B23001−1      REPLACED BY B23001−6
B24001−101    REPLACED BY B24001−121
B24001−111    SUPERSEDED BY B24001−121
B24001−68     SUPERSEDED BY B24001−101
B24001-119    HOIST - MAIN BATTERY
B24001-120    HOIST - MAIN BATTERY
B24001-121    HOIST - MAIN BATTERY
B26002-1      TEST EQPT - DISCHARGE LINES, CARGO FIRE
B27001−27     SUPERSEDED BY B27001−49
B27018        TRANSFERRED TO BAE SYSTEMS
B27018−1      SUPERSEDED BY B27018−19
B27027−51     SUPERSEDED BY B27027−68
B27064-1      TORQUE EQUIPMENT - RUDDER PEDAL ADJUSTMENT
B27064-2      TORQUE EQUIPMENT - RUDDER PEDAL ADJUSTMENT
B27070-1      ALIGNMENT PIN - FEEL ACTUATOR PISTON
B27079        TRANSFERRED TO BAE SYSTEMS
B27079−1      SUPERSEDED BY B27079−19
B28001-11     ADAPTER - SUMP DRAIN VALVE, REM/INSTL
B28001-13     ADAPTER - SUMP DRAIN VALVE, REM/INSTL
B28001-18     ADAPTER - SUMP DRAIN VALVE, REM/INSTL
B28002-1      HOSE ADAPTER - SUMP FUEL DRAIN
B28003-1      PULLER - MAIN TANK BOOST PUMP ASSY
B28004-1      SOCKET - INSTL/REMOVAL COLLIMATOR SLEEVE
B28005-1      PRESSURE PLUG EQPT - FUEL SYSTEM
B28005-2      PRESSURE PLUG EQPT - FUEL SYSTEM
B28005-27     PRESSURE PLUG EQPT - FUEL SYSTEM
B28009-1      ALIGNMENT EQPT - FUEL SHUTOFF VALVE
B29001−1      SUPERSEDED BY B29001−27
B29001−27     SUPERSEDED BY B29001−42
B29001−42     SUPERSEDED BY B29001−46
B29001-23     SCREEN EQUIPMENT - RAM AIR TURBINE
B29001-46     SCREEN EQUIPMENT - RAM AIR TURBINE
B29002-1      LOCK SET - RESERVOIR VENT VALVE
B29002-5      LOCK SET - RESERVOIR VENT VALVE
B29005-17     SIMULATOR - YAW DAMPER MODULE
B29006-1      SIMULATOR - YAW DAMPER/STABILIZER TRIM MODULE
B30001−1      SUPERSEDED BY B30001−7
B30001-7      TEST EQUIPMENT - WINDSHIELD RAIN REPELLENT
B30002-1      CLEANING TANK ASSY - WINDSHIELD RAIN REPELLENT
B31001        CABLE - ADAPTER, BUS ANALYZER, ARINC 429
B32001        DOWNLOCK - MLG & NLG
B32002        EXTENDER - DOWNLOCK SPRING, MLG & NLG
B32003        PIN PULLER - TRUNNION, NLG
B32004        HOIST ADAPTER - DRAG STRUT, NLG
B32005        OVERHEAD INSTL/REMOVAL EQUIPMENT - NOSE LANDING
B32006        LINK - SHOCK STRUT POSITIONER, MLG
B32007        SLING EQUIPMENT - RETRACT ACTUATOR, NLG
B32008        HOIST ADAPTER - RETRACT ACTUATOR MLG
B32009        STRUT - HOLD OPEN, NLG DOOR
B32010        CHANGE EQUIPMENT - WHEEL & BRAKE, MLG
B32011        THREAD PROTECTOR SET - MLG COMPONENTS
B32012        LOCK EQUIPMENT - DOOR ACTUATOR, MLG
B32013        LOCK - DOOR ACTUATOR, NOSE LANDING GEAR
B32015        HOISTING ADAPTER SET - MLG COMPONENTS
B32016        BRAKE PULLER - MAIN LANDING GEAR
B32017        STRUT - HOLD OPEN, MLG DOOR
B32018        ALIGNMENT PIN - TRUNNION LINK TO STRUT, MLG
B32019        RESTRAINT - SHOCK STRUT, NOSE LANDING GEAR
B32020        INSTL/REM EQUIP - MAIN LANDING GEAR
B32021        AXLE PROTECTOR - NLG
B32022        BRAKE DISCONNECT - FLIGHT DISPATCH
B32022        BRAKE DISCONNECT - FLIGHT DISPATCH
B32022−1      REPLACED BY A32080−1
B32022−6      REPLACED BY A32080−1
B32023        SLING - SHOP HANDLING, NLG
B32024        PULLER EQPT - LOWER BEARING SEAL RETAINER, NLG
B32025        PULLER EQPT - LOWER BEARING SEAL RETAINER, MLG
B32026        FIXTURE - STAKING, ACTUATOR, NLG LOCK
B32027        SOCKET SET - TRUNNION BEARING RETENTION NUTS,
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
B32028        LOCK EQUIPMENT - SHOCK STRUT, MLG
B32029        SUPPORT - TRUNNION LINK, MLG
B32030        FIXTURE - LOCK ACTUATOR, OVERHAUL EQPT, NLG
B32031        TORQUING EQPT - RETRACT ACTUATOR, NLG
B32032        TEST EQUIPMENT - NOSE WHEEL STEERING DRUM
B32033        WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE
B32034        WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE
B32035        INSTALLATION TOOL SET - RETAINER NUT, ANTI-SKID
B32036        ADAPTER - ACTUATOR, LANDING GEAR TRUCK
B32037        TEST EQUIPMENT - UPLOCK ASSY, MLG
B32038        EXTENDER - UPLOCK SPRING, MLG
B32039        FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR,
B32040        BUILD-UP EQPT - ACTUATOR, NOSE GEAR STEERING
B32041        TEST FIXTURE - TRUCK POSITION ACTUATOR, MLG
B32043        HANDLING EQPT - MLG DOOR & AC DOOR
B32044        PULLER EQPT - STRUCTURAL FUSE PIN, MLG
B32045        LOCATING FIXTURE - VALVE, GEAR OPERATED
B32046        ALIGNMENT PIN - MLG AXLE AND TOW FITTING
B32048        EQPT - SHOCK STRUT BUILDUP, MLG
B32049        PIN SET - DOWNLOCK, NLG & MLG
B32050−1      REPLACED BY B32050−50
B32050-50     ASSEMBLY FIXTURE - MLG
B32051        SPRING EXTENDER - LOCK RELEASE ACTUATOR, NG &
B32052        I/R EQPT - ORIFICE, NOSE LANDING GEAR SHOCK
B32053        CONTOUR TEMPLATE - NLG DOOR
B32054        ADAPTER - UPLOCK, MAIN LANDING GEAR
B32055        INSTL EQPT - GLAND NUT, SHOCK STRUT, MLG
B32057        OVERHAUL EQPT - RETRACT ACTUATOR ASSEMBLY, MLG
B32058        ALIGNMENT EQPT - BRAKE ROTOR, MLG
B32059        PULLER EQPT - AXLE SLEEVE MLG
B32060        DRILL JIG - AXLE
B32061        SPRING COMPRESSION EQPT - NWS CONTROL
B32062        TORQUE EQUIPMENT - SEQ VALVE/BYPASS VALVE, NLG
B32063        TEST FIXTURE EQPT - AUTOBRAKE ACTUATOR
B32064        RIGGING FIXTURE - MAIN LANDING GEAR DOOR
B32065        TEST FIXTURE - MAIN LANDING GEAR DOWNLOCK
B32066        ROLLER SWAGING & REMOVAL EQPT - BEARING
B32067        WRENCH ADAPTER - NOSE WHEEL STEERING TILLER
B32068        SLING - MLG HANDLING
B32069        LOCKOUT PIN - FWD & AFT LOCK LINK, RETR TAIL
B34001        TRANSFERRED TO BAE SYSTEMS
B36001        PLATFORM - PRECOOLER, INSTALLATION & REMOVAL,
B36002        PLUG EQUIPMENT - AIR CONDITIONING SYSTEM
B36003        LEVERAGE EQPT - INSTL & REMOVAL, PNEUMATIC
B36004        PLUG EQPT - PRESSURE TEST, L.P. DUCTS
B36005−1      SUPERSEDED BY B36005−3
B36005−2      REPLACED BY B36005−4
B36005-3      PLUG EQUIPMENT - DUCT TEST
B36005-4      PLUG EQUIPMENT - DUCT TEST
B36007        RMVL/INSTL EQPT - PRECOOLER, RB211-535 ENGINES
B36008        RMVL/INSTL EQPT - PRECOOLER, PW2000 ENGINE
B49001-1      FRAME - AUX. POWER UNIT, INSTALLATION & REMOVAL
B49001-35     FRAME - AUX. POWER UNIT, INSTALLATION & REMOVAL
B49002-64     STAND - AUX. POWER UNIT, MAINTENANCE & TRANSPORTATION
B49003-10     SLING - AUX. POWER UNIT HANDLING
B49004        SUPPORT EQUIP - APU
B49006        DISPATCH KIT - APU GENERATOR (GENERATOR
B52001        SLING - PASSENGER DOOR
B52002        SLING-MAIN CARGO DOOR (SHOP USAGE)
B52003        SAFETY BARRIER - PASSENGER DOOR
B52004-1      INSTALLATION TOOL - DOOR SEAL
B52005        SAFETY BARRIER - CARGO DOOR, FORWARD OR AFT
B52006        SAFETY BARRIER - ELEC/ELEX ACCESS DOOR
B52006-1
B52006-1      SAFETY BARRIER - ELEC/ELEX ACCESS DOOR
B52007        TEST FIXTURE - PASSENGER DOOR LATCHING
B52008        ADAPTER - CLOCKING NO.1 & NO.2 CARGO DOOR
B52009        SAFTEY PIN SET - EMERGENCY POWER SYSTEM, ENTRY
B52010        FIXTURE - BACKLASH, NO.1/2 DOOR MANUAL DRIVE
B52011        SAFETY BARRIER - NO. 3 CARGO DOOR
B52012        WRENCH - GUIDE ARM INSTL/REM, PASSENGER DOOR
B52013        SUPPORT ASSY - NO. 3 EMERGENCY DOOR
B52014        REPLACEMENT EQPT - BULK CARGO DOOR
B52015        SAFETY BARRIER - NO. 3 EMERGENCY EXIT DOOR
B52016        SLING - MAIN CARGO DOOR
B52017        COMPRESSER - SPRING, PASSENGER DOOR
B52018        SLING - CREW ENTRY DOOR
B52019        SAFTEY BARRIER - CREW ENTRY DOOR
B52020        ROTATION EQPT - MAIN CARGO DOOR LATCHES
B52021        WRENCH - THRUST COLLAR
                                                                      www.sinters.ca
PART NUMBER                           DESCRIPTION
B52022        MEASUREMENT TOOL - EMERGENCY POWER RSVR, CABLE
B52023        SPANNER WRENCH, HINGE NUT, #1, 2 & 4 DOORS
B52026        SERVICE PLATFORMS - ELEVATOR/SERVICE ACCESS
B52026-2
B52026-2      SERVICE PLATFORMS - ELEVATOR/SERVICE ACCESS
B52027        RIGGIN SIMULATOR - ESCAPE SLIDE, PASSENGER DOOR
B52028        CANOPY EQPT - #2 L.H. PASSENGER ENRY DOOR
B54001−11     SUPERSEDED BY B54001−19
B54001−19     SUPERSEDED BY B54001−25
B54001-30     HYDRAULIC PUMP - ENGINE ‘C‘ DUCT
B54002        SLING EQUIPMENT - STRUT, RB211 ENGINE
B54003        PRELOAD FIXTURE - STRUT, RB211 ENG
B54004        PRELOAD FIXTURE EQPT - STRUT, PW2000 SERIES
B54005        SLING - STRUT, PW2000 ENGINES
B54006        ALIGN FIXTURE - NACELLE SIDE LINK
B54007        DRILL JIG - NACELLE SIDE LINK
B54008        ALIGN. FIXT - NACELLE DIAG BRACE
B54009        SLING - RB211-535 ENGINE
B54010        DRILL JIG - NACELLE DIAGONAL BRACE-RB211
B54011        DRILL JIG - NACELLE DIAGONAL BRACE-PW2000
B54012        JIG EQPT - SIDE LINK, STRUT
B54013        SLING EQPT - DIAGONAL BRACE UNLOAD, PW2000
B54014        GREASE REMOVER - MIDSPAR FUSE PIN
B54015        TORQUE WRENCH - MIDSPAR FUSE PIN IMMOBILIZER
B54016-1      REMOVAL TOOL - SPLIT BUSHING
B54017        SLING EQPT - FUSE PIN REM/INSTAL-RB211-535
B54018        REMOVAL/INSTL KIT - FUSE PIN
B54019        ADAPTER EQPT - STRUT UNLOAD, FWD ENGINE MOUNT
B54019-23     ADAPTER EQPT - STRUT UNLOAD, FWD ENGINE MOUNT
B54019-24
B54019-24     ADAPTER EQPT - STRUT UNLOAD, FWD ENGINE MOUNT
B55001        SLING EQUIPMENT - VERTICAL STAB.
B55002        SUPPORT EQUIPMENT - HORIZONTAL STABILIZER
B55003        TOOL SET - HORIZ. STAB. HINGE BEARING
B55003−21     SUPERSEDED BY B55003−25
B57001        INSTL/RMV EQPT - TORQUE TUBE, INBD T.E. FLAP
B57002        EXTRACTION TOOL - CLAMP-UP BUSHING, AFT FLAP
B57003        ADAPTER EQPT - TRUNNION BEARINGS AND MOUNT, MLG
B57004        SUPPORT HANDLE-WING TIP BALANCE WEIGHTS
B57005        SOCKET ASSEMBLY - RETENTION NUT, ACTUATOR
B57006        REMOVAL/INSTALLATION EQPT - FLUTTER WEIGHTS
B71001        ENGINE HANDLING EQUIPMENT - RB211-535
B71003        SLING EQUIP - NOSE COWL, RB211-535 ENGINE
B71005        TOOL SET - ENGINE CHANGE, RB211-535
B71006        HOLD OPEN EQUIP - ’C’ DUCT RB211-535 ENGINE
B71007        CRADLE - RB211-535 ENGINE
B71008        PROOF LOAD FIXTURE - ENGINE HANDLING EQUIPMENT,
B71009        LOCK - ’C’ DUCT ACTUATOR, RB211 ENGINE
B71010        PROOF LOAD FIXTURE - CRADLE RB211-535
B71011        SAFETY ROD - "C" DUCT, RB211-535
B71013        SLING - FAN COWL, RB211-535 ENGINE
B71014        HANDLING FRAME EQUIPMENT - C/DUCT RB211-535
B71015        SLING - RB211-535 ENGINE
B71016        HOIST/TRANSPORTER - THRUST REVERSER AND FAN
B71017        PROOF LOAD FIXTURE - ’C’ DUCT FRAME, RB211-535
B71018        HANDLING FIXTURE - HIGH SPEED GEARBOX, RB211-
B71019        REFERENCE INFORMATION - ENGINE HANDLING
B71020        HOLD OPEN EQUIPMENT - THRUST REVERSER/CORE
B71021        PROOF LOAD FIXTURE - ENGINE HANDLING EQUIPMENT,
B71022        ENGINE HANDLING EQUIPMENT - P&W2000 SERIES
B71023        SLING - THRUST REVERSER, PW2000 SERIES ENGINES
B71024        TOOL SET - ENGINE CHANGE, PW2000 SERIES ENGINES
B71025        SAFETY ROD - ’C’ DUCT, RB211-535E4
B71026        PROOF LOAD FIXTURE - T/R SLING, PW2000 SERIES
B71027        SLING - ENGINE HANDLING, PW2000 SERIES ENGINES
B71028        CRADLE - EXHAUST NOZZLE, PW 2000 SERIES ENGINES
B71029        HOIST EQPT - C DUCT, RB211-535
B71030        SLING - COMMON NOZZLE ASSY, RB211-535E4
B71031        SLING - SLEEVE, THRUST REVERSER, PW2000 SERIES
B71032        LOCATING JIG - E.B.U. TO STRUT, PW2000 SERIES
B71033        CRADLE - EXHAUST NOZZLE
B71034−1      SUPERSEDED BY B71034−63
B71034−13     REPLACED BY B71034−48
B71034-29     TEST EQUIPMENT - ENGINE PRESSURE MONITORING
B71034-40     TEST EQUIPMENT - ENGINE PRESSURE MONITORING
B71034-48     TEST EQUIPMENT - ENGINE PRESSURE MONITORING
B71034-63     TEST EQUIPMENT - ENGINE PRESSURE MONITORING
B71035        FUEL SYSTEM PRESERVATION SUPPLY & DRAINAGE
B71036        HOIST SLING - PW2000 SERIES ENGINE & STAND
B71039        REMOVAL EQUIPMENT - BARREL NUT, ENGINE MOUNT
                                                                www.sinters.ca
PART NUMBER                             DESCRIPTION
B71040−20        SUPERSEDED BY B71040−36
B71040−21        SUPERSEDED BY B71040−37
B71040−22        SUPERSEDED BY B71040−38
B71040−23        SUPERSEDED BY B71040−39
B71040-39        SLING EQPT - INLET COWL
B71042           HANDLING FRAME EQUIPMENT - C/DUCT, RB211- 535
B71043           TEST EQUIPMENT - FUEL PUMP PRESSURE, PW2000
B71044−1         SUPERSEDED BY B71044−10
B71044−10        REPLACED BY B71044−28
B71044-28        ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF
B71046           SLING ASSY - OVERHEAD RMVL/INSTL, PW ENGINE
B71047           GAUGE - GAP MEASUREMENT, ENGINE V-GROOVE
B72001           BALANCE EQUIPMENT - ENGINE TRIM
B73001           WRENCH - TRIM ADJUSTMENT, RB211-535 ENGINE
B76002           RIGGING EQPT - AUTOTHROTTLE RESOLVER, PW2037
B76003-1         RIGGING EQUIPMENT - ENGINE CONTROL SYSTEM
B76004-1         ADAPTER - THRUST CONTROL INNER SHAFT
B78001−1         SUPERSEDED BY B78001−14 WITH PW4000 ENGINES
B78001−20        SUPERSEDED BY B78001−24
B78001−21        SUPERSEDED BY B78001−24
B78001-1         LOCK - THRUST REVERSER ISOLATION VALVE (GROUND
B78001-14        LOCK - THRUST REVERSER ISOLATION VALVE (GROUND
B78001-2         LOCK - THRUST REVERSER ISOLATION VALVE (GROUND
B78001-24        LOCK - THRUST REVERSER ISOLATION VALVE (GROUND
B78001-5         LOCK - THRUST REVERSER ISOLATION VALVE (GROUND
B78001-8         LOCK - THRUST REVERSER ISOLATION VALVE (GROUND
B78002           TOOL SET - ’C’ DUCT INSTL/REM, RB211-535 ENGINE
B78003           PIN - T/R DEACTIVATION, PW2000 SERIES ENGINES
B78004           RIGGING FIXTURE - SPRING BUMPER, FAN DUCT COWL
B78005           BONDING FIXTURE - THRUST REVERSER SLEEVE ASSY
B78006-1         RIGGING BAR - THRUST REVERSER, POSITION
B78007           SUPPORT EQPT - FAN DUCT COWL & THRUST REVERSER.
B78008−1         SUPERSEDED BY B78008−15
B78008−15        SUPERSEDED BY B78008−19
B78008-19        WRENCH SET - THRUST REVERSER ACTUATOR
B78009−2         SUPERSEDED BY B78009−21
B78009−21        REPLACED BY B78009−26
B78009-26        LOCK EQUIPMENT - THRUST REVERSER MAINTENANCE
B78010−9         REPLACED BY B78010−28
B78010-28        STAND - FUNCTIONAL TEST EQPT, LOCKING & NON-
B78011−1         SUPERSEDED BY B78011−25
B78011-25        TORQUE FIXTURE - LOCKING AND NON-LOCKING THRUST
B78012-1         TEST EQPT - FAN DUCT REVERSER, MANUAL DRIVE
B78013-1         OVERHAUL EQPT - T/R LOCKING ACTUATOR ASSY
B78013-2         OVERHAUL EQPT - T/R LOCKING ACTUATOR ASSY
B78014−1         SUPERSEDED BY B78014−24
B78014−24        SUPERSEDED BY B78014−29
B78014-37        TEST FIXTURE - ROD END & STROKE STOP, LOCKING &
B78015−1         SUPERSEDED BY B78015−17
B78015−1         SUPERSEDED BY B78015−23
B78015-23        OVERHAUL SET - T/R LOCKING ACTUATOR ASSY
B78016-1         OVERHAUL SET - T/R LOCKING & NON-LOCKING
B78017-1         INSTALLATION EQPT - BEARING-LEAD SCREW, T/R
B78018−1         SUPERSEDED BY B78018−9
B78019           VIBRATION ISOLATOR EQUIPMENT - T/R,
B78020           RETAINING PIN SET - THRUST REVERSER RB211-535E4
BH24944-12
BH24944-7
BOFAOGTOOL747LG00BORING FIXTURE - FITTING ASSY-TRUNNION NOSE
C07001-1         SHOCK ABSORBER EQUIPMENT - NOSE LANDING GEAR
C07002-1         FITTING - WING JACKING
C07003           CANCELLED
C07003-1         STOP COLLAR EQPT- NOSE LANDING GEAR (CANCELED)
C07004-1         PAD - AIRCRAFT JACKING, AFT BODY
C07005-1         FITTING - AIRPLANE TIEDOWN
C07006-1         TETHERING FIXTURE - REAR SPAR VENT FIN, AFT
C07007-1         JACK FITTING - FWD BODY STA 294.5
C07008-1         RESTRAINT EQPT - OUTBD T.E. FLAP TRACKS
C09001-1         COUPLER ASSY - TOWBAR
C09002-*         DATA SHEET - 737 TOWBAR DESIGN
C10002−1         SUPERSEDED BY C10002−9
C10002-9         MOORING EQPT- NLG
C10003-*         EXHAUST PLUGS - AUXILIARY POWER UNIT
C12001−1         SUPERSEDED BY C12001−28
C12001−28        SUPERSEDED BY C12001−35
C12001−35        REPLACED BY C12001−38
C12001-35        GUARD - INLET, ENGINE RUN-UP
C12001-38        GUARD - INLET, ENGINE RUN-UP
C12002−1         SUPERSEDED BY C12002−7
C12002−2         REPLACED BY C12002−8
                                                                   www.sinters.ca
PART NUMBER                           DESCRIPTION
C12002-7      DRAIN HOSE - SURGE TANK SUMP
C12003-1      ADAPTER NOZZLE - RAM AIR INLET MODIFICATION
C12004-6      SPRING - BALLSCREW LUBRICATION ATTACHMENT
C12005−1      REPLACED BY C12005−5
C12005-5      OIL GUN - T.E. FLAP ACTUATOR, BALL SCREW, HAND
C20001-1      ROLLER SWAGE - BEARING INSTL, ELEVATOR TAB
C21001−1      SUPERSEDED BY C21001−12
C21001−12     REPLACED BY C21001−16
C21001−16     REPLACED BY −19
C21001-12     TEST EQUIPMENT - COOLING SYSTEM PERFORMANCE
C21001-19     TEST EQUIPMENT - COOLING SYSTEM PERFORMANCE
C21002−1      SUPERSEDED BY C21002−20
C21002−20     REPLACED BY C21002−24
C21002-24     REVERSE FLUSHER EQPT - HEAT EXCHANGER
C21003−1      REPLACED BY C21003−45 OR 53
C21003−1      SUPERSEDED BY C21003−70
C21003−45     SUPERSEDED BY C21003−71
C21003−53     SUPERSEDED BY C21003−72
C21003-71     BACKFLUSH EQPT - A/C PACK HEAT EXCHANGER
C21003-72     BACKFLUSH EQPT - A/C PACK HEAT EXCHANGER
C21004−1      CANCELLED
C21004-1      JACK ADAPTER- INSTL /REMOVAL, AIR CONDITIONING
C21005-1      HOIST ADAPTER - AIR CONDITIONING PACK
C22001        TRANSFERRED TO BAE SYSTEMS
C22001−1      REPLACED BY C22001−13
C22001−13     SUPERSEDED BY C22001−18
C22003−1      SUPERSEDED BY C22003−18
C22003−18     SUPERSEDED BY C22003−22
C22003-22     TEST BOX - MACH TRIM ACTUATOR
C22004        TRANSFERRED TO BAE SYSTEMS
C22005−1      REPLACED BY C22005−22
C22005-1      BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-22     BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-25     BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-4      BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-5      BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-6      BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-7      BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C22005-8      BREAKEOUT BOX - MULTIPURPOSE, 100/124 PIN
C23001        TRANSFERRED TO BAE SYSTEMS
C23001−1      SUPERSEDED BY C23001−13
C23001−13     REPLACED BY C23001−15
C23001-15
C23002        TRANSFERRED TO BAE SYSTEMS
C24002−31     REPLACED BY C24002−39
C24002-39     JACK ADAPTER - VSCF & IDG
C24002-40     JACK ADAPTER - VSCF & IDG
C24002-41     JACK ADAPTER - VSCF & IDG
C24002-45     JACK ADAPTER - VSCF & IDG
C24003-1      TRAY ASSY - BATTERY, RMVL & INSTL
C24004-1      POWER DISTRIBUTION PANEL - REMOVAL &
C24005        TRANSFERRED TO BAE SYSTEMS
C24006        TRANSFERRED TO BAE SYSTEMS
C24007-1      TEST BOX - ELECTRIC METERS, BATTERY & GALLEY
C24008        TRANSFERRED TO BAE SYSTEMS
C25001-1      WRENCH - ANTI-RATTLE NUT
C26001        REPLACED BY F80229
C26001−1      SUPERSEDED BY C26001−20
C26001-20     TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM
C26002−1      SUPERSEDED BY C26002−21
C26002-21     TEST EQPT - ENGINE/APU FIRE DETECTION SYS
C26003-1      NUT DRIVER - LIGHT BASE USED TO REMOVE OR
C26004−1      SUPERSEDED BY C26004−8
C26004−11     SUPERSEDED BY C26004−27
C26004−12     SUPERSEDED BY C26004−28
C26004−27     SUPERSEDED BY C26004−32
C26004−28     SUPERSEDED BY C26004−33
C26004-32     TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
C26004-33     TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
C26004-8      TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
C26005-1      TEST BOX - APU/ENGINE FIRE DETECTION SYSTEM
C26006-1      TEST BOX - CARGO FIRE EXTINGUISHING SYSTEM
C26006-29     TEST BOX - CARGO FIRE EXTINGUISHING SYSTEM
C26006-30     TEST BOX - CARGO FIRE EXTINGUISHING SYSTEM
C26006-54     TEST BOX - CARGO FIRE EXTINGUISHING SYSTEM
C27001−10     SUPERSEDED BY C27001−24
C27001−13     SUPERSEDED BY C27001−25
C27001−23     SUPERSEDED BY C27001−33
C27001−24     SUPERSEDED BY C27001−34
C27001−25     SUPERSEDED BY C27001−35
                                                               www.sinters.ca
PART NUMBER                          DESCRIPTION
C27001−7       REPLACED BY C27001−10
C27001−7       SUPERSEDED BY C27001−23
C27001-16      GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS
C27001-33      GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS
C27001-34      GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS
C27001-35      GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS
C27003−1       SUPERSEDED BY C27003−31
C27003−31      SUPERSEDED BY C27003−38
C27003-38      SLING EQUIPMENT - RUDDER REMOVAL/INSTL
C27005-1       ASSEMBLY FIXTURE - ELEVATOR FEEL AND CENTERING
C27005-19      ASSEMBLY FIXTURE - ELEVATOR FEEL AND CENTERING
C27006−1       REPLACED BY C27006−12
C27006−1       SUPERSEDED BY C27006−12
C27006−12      REPLACED BY C27006−22
C27006−12      SUPERSEDED BY C27006−42
C27006−22      REPLACED BY C27006−34
C27006−22      SUPERSEDED BY C27006−47
C27006−34      SUPERSEDED BY C27006−48
C27006−47      REPLACED BY C27006−48
C27006-42      TEST EQUIP. - CUTOUT SWITCH STAB TRIM CONTROL
C27006-47      TEST EQUIP. - CUTOUT SWITCH STAB TRIM CONTROL
C27006-48      TEST EQUIP. - CUTOUT SWITCH STAB TRIM CONTROL
C27007−26      REPLACED BY C27007−31
C27007-31      TEST BOX - CUTOUT SWITCH, STAB TRIM CONTROL
C27008−1       SUPERSEDED BY C27008−20
C27008-20      LOCK EQPT - ACTUATION CONTROL, FLAP
C27008-22      LOCK EQPT - ACTUATION CONTROL, FLAP
C27009         TRANSFERRED TO BAE SYSTEMS
C27009−1       SUPERSEDED BY C27009−13
C27009−15      SUPERSEDED BY C27009−22
C27010−1       SUPERSEDED BY C27010−19
C27010−19      SUPERSEDED BY C27010−21
C27010-21      TEST BOX - AUTOSLAT COMPUTER
C27011         TRANSFERRED TO BAE SYSTEMS
C27011−1       SUPERSEDED BY C27011−12
C27011−12      SUPERSEDED BY C27011−16
C27012−1       SUPERSEDED BY C27012−14
C27012-14      LOCKOUT SET - L.E. SLAT ACTUATOR
C27013         TRANSFERRED TO BAE SYSTEMS
C27014         TRANSFERRED TO BAE SYSTEMS
C27014−1       REPLACED BY C27014−25
C27014−11      SUPERSEDED BY C27014−21
C27014−21      REPLACED BY C27014−26
C27016         TRANSFERRED TO BAE SYSTEMS
C27017-1       ADAPTER SET - TORQUE WRENCH, T.E. FLAPS
C27019-1       TAB BENDING EQPT - LOCKING WASHER, L.E. SLAT
C27020-1       TORQUE WRENCH ADAPTER - L.E. SLAT
C27021-1       TEST BLOCK - LEADING EDGE ACTUATOR
C27022-1       CLAMP SET - TRAILING EDGE FLAP TORQUE TUBE
C27023-1       HOLDING FIXTURE - L.E. SLAT ACTUATOR
C27024-1       ADAPTER - TORQUE WRENCH
C27025-1       TORQUE WRENCH EQPT - RUDDER PCU ATTACHMENT
C27026−1       REPLACED BY C27026−14
C27026−1,−14   REPLACED BY C27026−24
C27026-24      TEST FIXTURE - BRAKE ASSY, STABILIZER TRIM
C27027-14      TEST FIXTURE - L.E. SLAT ACTUATOR
C27028−1       REPLACED BY C27028−21
C27028−1       REPLACED BY C27028−9
C27028-21      RIGGING BAR - ELEVATOR TAB
C27030−1       SUPERSEDED BY C27030−33
C27030-2       TEST EQUIPMENT - FLAP SCREW BACKLASH
C27030-33      TEST EQUIPMENT - FLAP SCREW BACKLASH
C27030-49      TEST EQUIPMENT - FLAP SCREW BACKLASH
C27032-1       MEASUREMENT EQPT - STABILIZER/ELEVATOR (SKI
C27033-1       WRENCH - RETAINING NUT, STABILIZER TRIM
C27033-5       WRENCH - RETAINING NUT, STABILIZER TRIM
C27033-6       WRENCH - RETAINING NUT, STABILIZER TRIM
C27034-1       SLING EQPT - ELEVATOR REMOVAL/INSTALLATION
C27035−1       SUPERSEDED BY C27035−20
C27035-20      SLING EQPT - RUDDER REMOVAL/INSTL
C27036-1       SUPPORT SET - FORWARD ELEVATOR CONTROL QUADRANT
C27037-1       ASSEMBLY/DISASSEMBLY EQPT - FLIGHT SPOILER PCU
C27038−1       SUPERSEDED BY C27038−6
C27038-6       LOCKOUT PIN, L.E. CRUISE DEPRESSURIZATION VALVE
C27039-1       SPANNER WRENCH - HINGE BEARING, HORIZONTAL STAB
C27040-1       HOIST ADAPTER - INSTL/REMOVAL, FLAP TRACK
C27041-1       WRENCH - COUPLING SLEEVE FLAP ACTUATION
C27042-1       TORQUE WRENCH EQPT - RUDDER PCU ATTACHMENT
C27043-16      SEAL INSTALLATION EQPT - TE FLAP DRIVE
C27044−1       SUPERSEDED BY C27044−15
                                                                 www.sinters.ca
PART NUMBER                           DESCRIPTION
C27044-15      RIGGING BEAM - ELEVATOR INDEX PLATE INSTL
C27045-1       RIGGING EQUIPMENT - SLAT
C27046−1       REPLACED BY C27046−13
C27046−21      SUPERSEDED BY C27046−13
C27046-13      LOCK SET - INBOARD GROUND SPOILER ACTUATOR
C27047−1       SUPERSEDED BY C27047−19
C27047−16      SUPERSEDED BY C27047−20
C27047−19      REPLACED BY C27047−41
C27047−20      REPLACED BY C27047−42
C27047−21      REPLACED BY C27047−43
C27047-41      LOCK SET - FLIGHT SPOILER ACTUATOR
C27047-42      LOCK SET - FLIGHT SPOILER ACTUATOR
C27047-43      LOCK SET - FLIGHT SPOILER ACTUATOR
C27048−1       CANCELLED
C27048-1       VISE ADAPTER EQPT- ACTUATOR, L.E. FLAP
C27049−1       REPLACED BY C27049−36
C27049-36      REMOVAL/INSTALL EQPT - RUDDER PCU
C27050-32      HANDLING EQUIPMENT - REM/INSTALL, STAB
C27050-36      HANDLING EQUIPMENT - REM/INSTALL, STAB
C27051−1       REPLACED BY C27051−29
C27051-29      LOCK SET - LE SLAT AND KRUEGER FLAP ACTUATORS
C27052−1/−21   SUPERSEDED BY C27052−25
C27052-25      SLING EQPT - TRAILING EDGE FLAPS
C27054-1       THREAD PROTECTOR SET - HORIZ STAB HINGE PIN
C27055-1       SLING - AILERON, INSTL/REMOVAL
C27056−1       SUPERSEDED BY C27056−19
C27056-19      SLING EQPT - LEADING EDGE SLAT, REMOVAL AND
C27057-1       LOCK - RUDDER, PCU REMOVED
C27058-1       AXIAL LOAD EQPT - FLAP ACTUATION TORQUE BRAKE
C27059-1       TEST BLOCK EQPT - LE FLAP AND SLAT ACTUATOR
C27060-1       ADAPTER EQPT - CONTROL WHEEL
C27061-1       ADAPTER - WRENCH, FLIGHT SPOILER ACTUATOR PCU
C27062-1       TEST BLOCK - CARTRIDGE, VALVE, FLIGHT SPOILER
C27063-1       SUPPORT CLAMP - FWD ELEVATOR CONTROL QUADRANT
C27064-1       TORQUE WRENCH ADAPTER - MANUAL STAB TRIM WHEEL
C27065−1       REPLACED BY C27065−20
C27065-20      CHECK EQPT - JACKSCREW BACKLASH, HORIZ. STAB
C27066-1       LOCK EQPT - AILERON/ELEVATOR PCU INPUT ROD
C27067−1       SUPERSEDED BY C27067−42
C27067−42      SUPERSEDED BY C27067−48
C27067−48      SUPERSEDED BY C27067−62
C27067−49      SUPERSEDED BY C27067−63
C27067−50      SUPERSEDED BY C27067−64
C27067−62      SUPERSEDED BY C27067−81
C27067−63      SUPERSEDED BY C27067−82
C27067−64      SUPERSEDED BY C27067−83
C27067-81      TEST EQUIPMENT - TORQUE LIMITER, TRANS, T.E.
C27067-82      TEST EQUIPMENT - TORQUE LIMITER, TRANS, T.E.
C27067-83      TEST EQUIPMENT - TORQUE LIMITER, TRANS, T.E.
C27068−1       SUPERSEDED BY C27068−65.
C27068-65      TEST EQUIPMENT - T.E. FLAP DRIVE GEARBOXES
C27069−1       SUPERSEDED BY C27069−12
C27069-12      RIGGING EQPT - INTERLOCK VALVE CABLE, GROUND
C27071-1       POSITIONER EQPT - ROD END, ACTUATOR
C27072−1       SUPERSEDED BY C27072−92
C27072−2       SUPERSEDED BY C27072−93
C27072-92      TEST EQUIPMENT - T.E. FLAP TRANSMISSION, AFT U-
C27072-93      TEST EQUIPMENT - T.E. FLAP TRANSMISSION, AFT U-
C27072-94      TEST EQUIPMENT - T.E. FLAP TRANSMISSION, AFT U-
C27073-1       TEST EQPT - QUADRANT ASSEMBLY, ELEVATOR
C27074-1       OVERHAUL EQPT - SPRING STACK, T.E. FLAP
C27075-1       SPANNER WRENCH - BRAKE NUT, STAB TRIM ACTUATOR
C27076−1       REPLACED BY C27076−9
C27076-9       ADAPTER - TORSION ROD INSTL, LE SLAT
C27077-1       TEST EQPT - QUADRANT ASSEMBLY, AILERON CONTROL
C27078-1       MEASUREMENT TOOL - STAB SYSTEM TEST
C27079-1       HOLD EQPT - T.E. INBOARD FLAP
C27080-1       DRUM WRENCH - STAB, TRIM ACTUATOR
C27081-1       EXTENDER BOX - FLAP/SLAT PROXIMITY SENSORS
C27082-1       FIXTURE EQPT - PUSHROD LENGTH ADJUSTEMENT ELEVATOR TAB & AILERON
C28001         REPLACED BY C28003
C28001-1       ADAPTER - SUMP DRAIN, CENTER WING TANK
C28002−1       SUPERSEDED BY C28002−9
C28002-9       SPANNER WRENCH - FUEL SUMP DRAIN VALVE
C28003-1       ADAPTER - SUMP PUMP, CENTER WING TANK
C28004-1       TEST EQUIPMENT - FUEL FEED LINE
C28005-1       SUMP DRAIN FIXTURE - ROGERSON AUXILIARY FUEL
C28006−1       SUPERSEDED BY C28003−11
C28006-11      LEAK TEST EQPT - ROGERSON AUXILIARY FUEL
C28007-1       PLUG EQPT - ROGERSON AUXILIARY FUEL TANK
                                                                                  www.sinters.ca
PART NUMBER                           DESCRIPTION
C28008-1      TEST EQPT - FUEL TANK AND VENT SYSTEM
C28010-1      PRIMING BOTTLE - BOOST PUMP
C28011        TRANSFERRED TO BAE SYSTEMS
C28012-1      TEST ASSY - FLOAT SWITCH CONDUIT
C28012-8      TEST ASSY - FLOAT SWITCH CONDUIT
C28013-1      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-2      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-3      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-4      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-5      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-6      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-7      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C28013-8      PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR
C29001-1      CAP - SEALING, PRESSURE TRANSMITTER MOUNT
C29002-17     TEST EQPT - RUDDER POWER CONTROL UNIT
C29003-1      SEAL INSTL EQPT - HYDRUALIC SWIVEL ASSY
C29004-1      DRAIN HOSE - HYDRAULIC RESERVOIR
C29005-1      ADAPTER - TEE, STANDBY HYDRAULIC SYSTEM TEST
C30001        TRANSFERRED TO BAE SYSTEMS
C30001−1      REPLACED BY C30001−21
C30001−1      SUPERSEDED BY C30001−26
C30001−21     SUPERSEDED BY C30001−29
C30001−26     REPLACED BY C30001−32
C30001−29     REPLACED BY C30001−32
C30001-26     TEST BOX - superceded by -32
C31001        TRANSFERRED TO BAE SYSTEMS
C31001−1      SUPERSEDED BY C31001−13
C31003-1      TEST BOX - EIS DATA RETRIEVAL
C32001        TRANSFERRED TO BAE SYSTEMS
C32002-1      RING COMPRESSOR, NOSE LANDING GEAR INNER
C32003-1      REMOVAL EQPT - TRUNNION LINK PIN, MAIN LANDING
C32003-16     REMOVAL EQPT - TRUNNION LINK PIN, MAIN LANDING
C32003-24     REMOVAL EQPT - TRUNNION LINK PIN, MAIN LANDING
C32004−1      SUPERSEDED BY C32004−35
C32004−35     SUPERSEDED BY C32004−47
C32004−47     REPLACED BY C32004−52
C32004−47     SUPERSEDED BY C32004−58
C32004−52     SUPERSEDED BY C32004−58
C32004-58     TEST EQPT - PROXIMITY SYSTEM
C32007-1      MANDREL - BEARING INSTL, MLG FORWARD TRUNNION
C32008-1      HOLDING FIXTURE - MAIN LANDING GEAR DAMPER ASSY
C32009-1      SWAGING EQPT - OVERSIZE NOSE GEAR BEARING,
C32010-1      WRENCH,SPANNER - HYDRAULIC ACTUATOR, MLG
C32011−1      SUPERSEDED BY C32011−7
C32011-7      SOCKET EQPT - BRAKE DISCONNECT VALVE
C32012−1      SUPERSEDED BY C32012−12
C32012−8      SUPERSEDED BY C32012−12
C32012-12     REVL/INSTL EQPT - WHEEL RETENTION NUT, MLG AND
C32013-1      TORQUE WRENCH ADAPTER - AFT BRG RTNR NUT, MLG
C32014-1      SPRING EXTENDER - DOWNLOCK, NOSE AND MAIN
C32015-1      PULLED EQPT - FUSE PIN, MLG FORWARD TRUNNION
C32015-18     PULLED EQPT - FUSE PIN, MLG FORWARD TRUNNION
C32016−1      SUPERSEDED BY C32016−33
C32016−33     REPLACED BY C32016−46
C32016−33     REPLACED BY C43016−45
C32016-46     RMVL/INSTL EQPT - NLG LOWER SEALS
C32017−1      REPLACED BY C32017−43
C32017-43     REPLACEMENT EQPT - LWR BEARING SEALS, MAIN
C32018-1      EQPT - PROTECTION GUIDE, MLG AND NLG LOWER
C32019-1      EXTENSION - ORIFICE TUBE, NOSE GEAR SHOCK STRUT
C32020-1      EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING
C32020-15     EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING
C32021-1      WRENCH SET - RETAINER NUT, REM/INSTL, ANTI-
C32022−1      SUPERSEDED BY C32022−15
C32022−15     REPLACED BY C32022−17
C32022−2      REPLACED BY C32022−20
C32022-17     THREAD PROCTECTOR EQPT - MLG/NLG AXLE
C32022-20     THREAD PROCTECTOR EQPT - MLG/NLG AXLE
C32023-1      WRENCH - TRUNNION SPHERICAL BEARING, MLG
C32025−1      REPLACED BY C32025−7
C32025-7      SPANNER WRENCH - GLAND NUT, NOSE LANDING GEAR
C32026-1      DOWNLOCK EQPT - NLG AND MLG
C32027-1      HLDG FIXTURE EQPT - FUNCTIONAL TEST, LDG GEAR
C32027-2      HLDG FIXTURE EQPT - FUNCTIONAL TEST, LDG GEAR
C32027-3      HLDG FIXTURE EQPT - FUNCTIONAL TEST, LDG GEAR
C32028−1      REPLACED BY C32028−58
C32028−2      SUPERSEDED BY C32028−56
C32028−3      REPLACED BY C32028−59
C32028-56     RMVL/INSTL EQPT - WALKING BEAM ASSY, MAIN
C32028-58     RMVL/INSTL EQPT - WALKING BEAM ASSY, MAIN
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
C32028-59     RMVL/INSTL EQPT - WALKING BEAM ASSY, MAIN
C32029-1      PIN INSTL/RMVL KIT - MAIN LANDING GEAR
C32030−1      SUPERSEDED BY C32030−10
C32030-10     RETENTION STRAP EQPT - INNER CYL, NOSE & MAIN
C32031-1      REMOVAL/INSTL EQPT - AFT TRUNNION PIN, MLG
C32032−1      SUPERSEDED BY C32032−57
C32032-57     PULLER EQPT - AXLE/BRAKE SLEEVE, MLG
C32033-1      RMVL/INSTL EQPT - TRUNNION PIN, NLG
C32034−1      SUPERSEDED BY C32034−204
C32034−204    SUPERSEDED BY C32034−211
C32034-211    RMVL/INSTL EQPT, MAIN LANDING GEAR
C32034-9      RMVL/INSTL EQPT, MAIN LANDING GEAR
C32035-1      METERING PIN & RTNR RING REMOVAL/INSTL EQPT -
C32036-1      FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE
C32036-45     FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE
C32036-46     FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE
C32037-1      HOLD FIXTURE - MAIN LANDING GEAR
C32038-1      ROD END BEARING RMVL/INSTL EQPT - ACTUATORS,
C32039-1      ADAPTER - FUNCTIONAL TEST, NLG STEERING
C32040−1      REPLACED BY C32040−6
C32040-6      SPANNER WRENCH - NLG STEERING COLLAR RETAINER
C32041−1      SUPERSEDED BY C32041−40
C32041-40     BUILDUP EQPT - NOSE LANDING GEAR
C32042−1      SUPERSEDED BY C32042−61
C32042-61     RMVL/INSTL EQPT - ORIFICE TUBE AND METERING
C32043-1      WRENCH - RETAINING NUT, NLG STEERING VALVE
C32044-1      FREEPLAY CHECK EQPT - NLG
C32045-1      HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING
C32046-1      HOLDING FIXTURE EQPT - SHIMMY DAMPER ASSY, MLG
C32048-1      ADAPTER ASSY - UPLOCK, MAIN LANDING GEAR
C32049-1      OUTRIGGER ASSY - RMVL AND INSTL/GROUND
C32050-1      LOCKOUT PIN ASSY - FWD & AFT LOCK LINK, TAIL
C34000        TRANSFERRED TO BAE SYSTEMS
C34001        CANCELLED
C34001        TRANSFERRED TO BAE SYSTEMS
C34003        TRANSFERRED TO BAE SYSTEMS
C34004        TRANSFERRED TO BAE SYSTEMS
C34005−1      REPLACED BY C34005−16
C34005-16     EXTENDED BOX - RADIO ALIMETER RECEIVER
C34006−1      SUPERSEDED BY C34006−53
C34006−53     REPLACED BY C34006−57
C34006-57     ADAPTER, TRAY - EFIS SYMBOL GENERATOR SOFTWARE
C34011        TRANSFERRED TO BAE SYSTEMS
C34012−1      SUPERSEDED BY C34012−21
C34012-2      TEST BOX - TOTAL AIR TEMPERATURE PROBE, AIR
C34012-21     TEST BOX - TOTAL AIR TEMPERATURE PROBE, AIR
C34013        TRANSFERRED TO BAE SYSTEMS
C34014        TRANSFERRED TO BAE SYSTEMS
C35001-1      PRESSURE LEAK TEST EQUIPMENT - CREW OXYGEN
C35002-1      PRESSURE LEAK TEST EQUIPMENT - PASSENGER OXYGEN
C35003-1      RETRACTION EQUIPMENT - FIRING PIN, OXYGEN
C36001−1      SUPERSEDED BY C36001−39
C36001−39     SUPERSEDED BY C36001−44
C36001-44     TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS
C38001−1      SUPERSEDED BY C38001−23
C38001-23     DRAIN MAST PLUG - WASTE WATER
C38002-1      PLUG EQPT - SKIN FITTING, DOOR SILL DRAIN
C49001-1      TOOL KIT - APU DELETION
C49002−1      SUPERSEDED BY C49002−36
C49002-36     TEST BOX - APU CONTROL UNIT
C49003-1      CRADLE, SUNDSTRAND APU - HOIST EQPT, CG
C49004        REPLACED BY F80188
C49004−1      REPLACED BY C49004−25
C49004−2      REPLACED BY C49004−26
C49004−25     SUPERSEDED BY C49004−36
C49004−26     SUPERSEDED BY C49004−37
C49004−27     SUPERSEDED BY C49004−38
C49004−28     SUPERSEDED BY C49004−39
C49004−3      REPLACED BY C49004−27
C49004−30     SUPERSEDED BY C49004−40
C49004−31     SUPERSEDED BY C49004−41
C49004−4      REPLACED BY C49004−28
C49004-36     SLING EQUIPMENT - APU
C49004-37     SLING EQUIPMENT - APU
C49004-38     SLING EQUIPMENT - APU
C49004-39     SLING EQUIPMENT - APU
C49004-40     SLING EQUIPMENT - APU
C49004-41     SLING EQUIPMENT - APU
C49005-1      WRENCH - I.G.V. ACTUATOR GARRETT GTCP 36-280
C49006-1      THREAD PROTECTOR EQPT - APU MOUNT BOLTS
                                                                www.sinters.ca
PART NUMBER                           DESCRIPTION
C49007-1      HOIST EQPT - AUXILIARY POWER UNIT
C49007-20     HOIST EQPT - AUXILIARY POWER UNIT
C49008−1      SUPERSEDED BY C49008−37
C49008-37     ADAPTER EQPT - APU JACKING
C49009-1      TOOL KIT - APU DELETION
C49010−1      SUPERSEDED BY C49010−40
C49010−40     SUPERSEDED BY C49010−50
C49010-50     CRADLE ASSY - AE131-9B APU
C49011-1      TEST EQPT - FUEL FEED, AUX POWER UNIT
C51001-1      JACK EQUIPMENT - ENGINE SUPPORT
C51001-2      JACK EQUIPMENT - ENGINE SUPPORT
C51002        CANCELLED
C51003−1      SUPERSEDED BY C51003−23
C51003−23     SUPERSEDED BY C51003−28
C51003-28     MEASUREMENT EQPT - SKIN SMOOTHNESS, PITOT
C52001        REPLACED BY C52004
C52001-1      HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE
C52002−1      SUPERSEDED BY C52002−32
C52002−2      REPLACED BY C52002−26
C52002−2      SUPERSEDED BY C52002−33
C52002−26     SUPERSEDED BY C52002−33
C52002-32     REPAIR FIXTURE - FWD & AFT CARGO DOOR
C52002-33     REPAIR FIXTURE - FWD & AFT CARGO DOOR
C52003-1      TEST EQPT - BACKLASH, AFT AIRSTAIRS GEARBOX
C52004−1      SUPERSEDED BY C52004−9
C52004-1      SPRING - LOADING CONTROL EQPT
C52005-1      FIXTURE EQPT - AUTOMATIC OVERWING EXIT DOOR
C52006−1      REPLACED BY C52006−34
C52006-34     RIGGING SIMLATOR - ESCAPE SLIDE, PASENGER DOOR
C52007-1      TORQUE WRENCH ADAPTER EQPT AUTOMATIC OVERWING
C52008-1      TORQUE WRENCH ASSY - GALLEY AND ENTRY DOOR
C52009-1      LIFTING FIXTURE EQPT - MAIN DECK CARGO DOOR
C52009-2      LIFTING FIXTURE EQPT - MAIN DECK CARGO DOOR
C52010-1      SUPPORT EQPT - MID-EXIT DOOR
C52011-1      SAFETY BARRIER - MID-EXIT DOOR
C52012-1      SAFETY BARRIER - ENTRY & GALLEY DOORS
C52013-1      TRANSPORTATION SLING EQPT - FORWARD AIR STAIR USED TO INSTALL, REMOVE, LIFT AND TRANSPORT THE FORWARD AIR STAIR ASSY.
C54001−1      SUPERSEDED BY C54001−27
C54001−27     SUPERSEDED BY C54001−37
C54001-37     SLING EQUIPMENT - STRUT REMOVAL/INSTL
C54002-1      ALIGNMENT EQUIPMENT - ECCENTRIC BUSHING, ENGINE
C54003−1      REPLACED BY C54005−1
C54003-1      SOCKET - FUSE PIN, MIDSPAR NACELLE STRUT
C54004−1      SUPERSEDED BY C54004−11
C54004-11     SLING EQPT - CFM56-3 ENGINE
C54005-1      REM/INSTL EQPT - FUSE PIN, NACELLE STRUT,
C54007-1      FEELER GAGE - CFM56-7 STRUT TO WING
C54008-1      AFT FAIRING - REMOVAL & INSTALLATION
C54008-28     AFT FAIRING - REMOVAL & INSTALLATION
C54009-27     RMVL/INSTL KIT - FUSE PIN
C54010−1      SUPERSEDED BY C54010−26.
C54010-26     SLING EQPT - FUSE PIN R/I, CMF56-7
C54011-1      RMVL/INSTL EQPT - ENGINE STRUT, CFM56-7
C54013-1      ALIGNMENT EQUIP - ECCDENTRIC BUSHING, ENG STRUT
C54014-1      BEARING REPLACEMENT EQPT - T/R HINGE
C54015-1      SPANNER WRENCH - THRUST REVERSER HINGE FITTING
C55001-1      SLING - ELEVATOR REMOVAL/INSTL
C55002-1      PUNCH SET, HORIZONTAL STABILIZER CENTER SECTION
C55004-1      SLING EQPT - VERTICAL FIN
C55005−1      REPLACED BY C55005−11
C55005-11     PIN REMOVAL EQPT - HORIZONTAL STABILIZER
C55007-1      SLING EQPT - HORIZONTAL STAB REMOVAL/INSTALL
C55007-29     SLING EQPT - HORIZONTAL STAB REMOVAL/INSTALL
C55008-1      ALIGNMENT EQPT - HORIZONTAL STAB INSTALLATION
C55009-1      ALIGNMENT TOOL - FIN INSTALLATION
C55010−1      REPLACED BY C55010−33
C55010-33     SLING EQPT - VERTICAL FIN
C55011−1      REPLACED BY C55011−6
C55011-6      SPANNER WRENCH - HORIZONTAL STAB CENTER PIVOT
C56001-1      WINDOW LATCH TORQUING SOCKET ASSEMBLY RIGHT AND
C57001-1      ROLLER SWAGING EQPT - HINGE BRACKET
C57002-1      SLING EQPT - REMOVAL/INSTALLATION, WINGLET
C57003-1      TEST EQUIPMENT - WING DRY BAY VAPOR SEAL
C71001-*      SPECIFICATION - WRENCH AFT CONEBOLT NUT, CFM56-
C71002−81     REPLACED BY C71002−84
C71002−81     REPLACED BY C71002−91
C71002−84     SUPERSEDED BY C71002−91
C71002-91     THRUST REVERSER & COWLING HANDLING EQUIPMENT
C71003−100    SUPERSEDED BY C71003−191
C71003−127    REPLACED BY C71003−171
                                                                                                                        www.sinters.ca
PART NUMBER                                 DESCRIPTION
C71003−171          SUPERSEDED BY C71003−191
C71003−190          REPLACED BY C71003−191
C71003−190          SUPERSEDED BY C71003−217
C71003−191          SUPERSEDED BY C71003−218
C71003−217          REPLACED BY C71003−218
C71003−217          REPLACED BY C71003−235
C71003−218          REPLACED BY C71003−235
C71003-235          BOOTSTRAP EQUIP. CFM56-3 ENGINE
C71004-1            SLING - INLET COWL, CFM56-3 ENGINE
C71005−1            SUPERSEDED BY C71005−33
C71005−33           REPLACED BY C71005−42
C71005-42           SLING ASSY - FAN COWL, CFM56-3 ENGINE
C71006−1            SUPERSEDED BY C71006−6
C71006−6            REPLACED BY C71006−9
C71006-9            THREAD PROTECTOR EQPT - CONE BOLTS CFM56-3
C71007              CANCELLED
C71007              SUPERSEDED BY C71015
C71007−27           SUPERSEDED BY C71015−1
C71007-27           OVERHEAD SHOP HANDLING SLING- CFM56-3 ENGINE
C71008-*            SPECIFICATIONS - HANDLING EQUIPMENT, CFM56-3
C71009-16           WRENCH - ELEC. CONNECTOR, DFM56-3 ENGINE
C71010-1            PROOF LOAD EQUIPMENT - CFM56-3 ENGINE CRADLE
C71011-1            LOCATING JIG - EBU TO STRUT; SYSTEMS INTERFACES
C71011-25           LOCATING JIG - EBU TO STRUT; SYSTEMS INTERFACES
C71012−1            SUPERSEDED BY C71012−21
C71012−21           SUPERSEDED BY C71021−28
C71012−28           REPLACED BY C71012−47
C71012-35           TEST EQUIPMENT - ENGINE VIBRATION ISOLATION
C71012-47           TEST EQUIPMENT - ENGINE VIBRATION ISOLATION
C71013-1            SAFETY SCREEN - PERSONNEL BARRIER, CFM56-3
C71014-1            ADAPTER WRENCH - AFT CONE BOLT NUT
C71015−1            REPLACED BY C71015−56
C71015−1            SUPERSEDED BY C71015−79
C71015−56           SUPERSEDED BY C71015−79
C71015−64           SUPERSEDED BY C71015−80
C71015−75           SUPERSEDED BY C71015−80
C71015−79           REPLACED BY C71015−83
C71015−80           SUPERSEDED BY C71015−83
C71015-83           ENGINE SLING EQPT - OVERHEAD SHOP HANDLING
C71016-1            REPAIR EQPT - INLET ASSY, CFM56-3
C71017              CANCELLED
C71018-1            ALIGNMENT GUIDE - CONE BOLT, FORWARD ENGINE
C71019−1            REPLACED BY C71019−7
C71019-7            WRENCH - AFT CONE BOLT NUT
C71020−1            SUPERSEDED BY C71020−71
C71020−71           SUPERSEDED BY C71020−76
C71020−76           SUPERSEDED BY C71020−80
C71020−80           SUPERSEDED BY C71020−91
C71020-91           BOOTSTRAP EQPT - CFM56-7 ENGINE
C71022−1            SUPERSEDED BY C71022−6
C71022−5            SUPERSEDED BY C71022−6
C71022-6            TORQUE WRENCH - ENGINE MOUNT BOLTS
C71023-1            PROOF LOAD FIXTURE - BOOTSTRAP, CFM56-7 ENGINE
C71024-1            SLING ASSY - AFT ENGINE MOUNT CFM56-7
C71025-1            SAFETY SCREEN - PERSONNEL BARRIER, CFM56-7
C71026-1            SLING ASSY - FAN COWL, CFM56-7 ENGINE
C71027-1            INSTALLATION/REMOVAL FRAME EQPT - INLET COWL
C71028-*            SPECIFICATION - INTERFACE CONTROL, CFM56-7
C72001-1            INDICATOR OVERLAY SET - AIRBORNE VIBRATION
C73002              TRANSFERRED TO BAE SYSTEMS
C75001-1            SWITCH PUSHER - SYSTEM TEST
C76001−1/−2/−5/−6   SUPERSEDED BY C76001−9/−10/−11/−12
C76001-10           RIGGING PIN
C76001-11           RIGGING PIN
C76001-12           RIGGING PIN
C76001-9            RIGGING PIN
C76002-1            HAND TOOL SET - CONTROL STAND,
C76002-14           HAND TOOL SET - CONTROL STAND,
C76002-20           HAND TOOL SET - CONTROL STAND,
C77001
C77001              TRANSFERRED TO BAE SYSTEMS
C77001−14           REPLACED BY C77001−18
C77001−14           SUPERSEDED BYC77001−31
C77001−18           REPLACED BY C77001−25
C77001−18           SUPERSEDED BY C77001−31
C77001−25           SUPERSEDED BY C77001−28
C77001−28           SUPERSEDED BY C77001−31
C77002−1            SUPERSEDED BY C77002−20
C77002-20           TEST BOX - TACHOMETER SYSTEM
C77003              TRANSFERRED TO BAE SYSTEMS
                                                                      www.sinters.ca
PART NUMBER                         DESCRIPTION
C77004−1      SUPERSEDED BY C77004−10
C77004-10     TEST BOX - GENERIC AVM INTERFACE
C77005        TRANSFERRED TO BAE SYSTEMS
C78001−1      SUPERSEDED BY C78001−13
C78001-13     HOLD OPEN ROD - THRUST REVERSER
C78002−1      REPLACED BY C78011−1
C78002-1      DOLLY - TRANSPORT, THRUST REVERSER
C78003−1      SUPERSEDED BY C78003−47
C78003−47     SUPERSEDED BY C78003−52
C78003-52     SLING - THRUST REVERSER
C78004-1      LOCKPIN EQPT - THRUST REVERSER TRANSLATING
C78005−1      SUPERSEDED BY C78005−12
C78005−12     SUPERSEDED BY C78005−14
C78005−14     SUPERSEDED BY C78005−17
C78005−17     SUPERSEDED BY C78005−21
C78005-21     HAND PUMP - OPENING SYSTEM, THRUST REVERSER
C78006-1      ACTUATOR LOCK ASSY - THRUST REVERSER ACTUATOR
C78008        CANCELLED
C78009−1      REPLACED BY C78009−33
C78009−19     REPLACED BY C78009−33
C78009−24     SUPERSEDED BY C78009−33
C78009-33     REMOVE/INSTALL TOOL - PRIMARY EXHAUST SLEEVE &
C78010-1      LATCHING TOOL, THRUST REVERSER ’C’ DUCT HALVES
C78011−1      SUPERSEDED BY C78011−60
C78011−29     REPLACED BY C78011−36
C78011−29     SUPERSEDED BY C78011−70
C78011−36     SUPERSEDED BY C78011−70
C78011−70     SUPERSEDED BY C78011−73
C78011−73     SUPERSEDED BY C78011−78
C78011-37     DOLLY & HYDRAULIC EQPT
C78011-60     DOLLY & HYDRAULIC EQPT
C78011-78     DOLLY & HYDRAULIC EQPT
C78012−1      SUPERSEDED BY C78012−14
C78012-14     HOLD OPEN EQPT - THRUST REVERSER
C78014−1      SUPERSEDED BY C78014−6
C78014-6      WRENCH SET - THRUST REVERSER HINGE, CFM56-3
C78014-9      WRENCH SET - THRUST REVERSER HINGE, CFM56-3
C78015-1      ALIGNMENT ROD - CFM-56 T/R
C78016-1      LATCHING LEVER - THRUST REVERSER COWLING
C78017-1      ALIGNMENT TOOL - LWR AUX SLIDER, T/R
C78018−1      REPLACED BY C78018−47
C78018-47     SLING EQPT - THRUST REVERSER, CFM56-7
C78019−1      SUPERSEDED BY C78019−15
C78019-15     HOLD OPEN EQPT - T/R COWL, CFM56-7 ENGINE
C78020−11     REPLACED BY C78020−14
C78020−8      SUPERSEDED BY C78020−11
C78020-14     LATCHING TOOL - THRUST REVERSER C-DUCT HALVES
C78021-1      65 DEGREE HOLD OPEN EQPT - T/R COWL, CFM56-7
C78022-1      SLING EQPT - THRUST REVERSER SLEEVE
C78023-1      LOCK ASSY - THRUST REVERSER ACTUATOR, CFM56-7
C78025−1      SUPERSEDED BY C78025−21
C78025-21     ACTUATOR INSTALLATION/REMOVAL TOOL
C78026−1      SUPERSEDED BY C78026−140
C78026−140    SUPERSEDED BY C78026−146
C78026−146    SUPERSEDED BY C78026−156
C78026-156    ACTUATOR INSTALLATION/REMOVAL TOOL
C78027-1      TORQUE FIXTURE - LOCKING & NON-LOCKING THRUST
C78028-1      ALIGNMENT EQPT - UPPER AUXILIARY SLIDER, T/R
C79001-1      TEST EQPT - ENGINE, FUEL/OIL, PRESSURE SWITCH
D71017        CANCELLED
F2867−1       REPLACED BY C27065−20
F52221        SLING ASSEMBLY-JT3(J57) ENGINE HOISTING USED
F52238        JACK ASSEMBLY - STABILIZER SUPPORT INSERTED
F52485-500    PROTRACTOR ASSEMBLY
F65834        WRENCH ASSY - FUEL DRAIN VALVE USED TO DRAIN
F70008        DOWNLOCK ASSY - NOSE LANDING GEAR USED TO
F70009        ADAPTER ASSY - AIRCRAFT JACKING USED TO ADAPT
F70013        WRENCH - HOOK SPANNER, 3 INCH DIAMETER USED TO
F70023        PLUG ASSY - CABIN AIR COMPRESSOR INLET USED TO
F70024        PROTRACTOR ASSY - THROTTLE WARNING HORN USED TO
F70025        PULLER - BOLT KIT SPLICE MAINTENANCE USED TO
F70026        COVER ASSY - JT3C SOUND SUPPRESSOR USED TO
F70027        LOCK ASSY - MAIN LANDING GEAR OLEO USED TO LOCK
F70030        A-FRAME ASSY-FIN RAISING & LOWERING USED WITH
F70033-*      REMOVER ASSY - INTERIOR TRIM USED TO REMOVE THE
F70038-*      WRENCH ASSY - MECHANISM NUT DOOR HANDLE. USED
F70041        PLUG ASSY - COOLING AIR OUTLET USED TO PREVENT
F70043-*      GAGE ASSY - AIRPLANE ATTITUDE USED TO DETERMINE
F70044-500    PROTRACTOR ASSY - REVERSE THRUST LEVER. USED TO
F70045        PLUG ASSY - OIL COOLER AND STARTER EXHT. USED
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
F70051        ADAPTER - THRUST REVERSER HOIST JT3C USED IN
F70053        WRENCH ASSY - METERING PIN USED TO HOLD THE
F70056        PLUG ASSY - JT3C,JT4A TURBOCOMPRESSOR EX USED
F70057        SUPPORT ASSY - STABILIZER JACK SCREW USED TO
F70059        SLING ASSY - RUDDER HOISTING USED TO INSTALL
F70060        CANCELLED
F70060-7      COVER ASSEMBLY- PITOT TUBE (CANCELED)
F70061        ROD ASSY - CLAMSHELL RETRACTING USED TO
F70063        KIT - PLUG SHIELD AND COVER KIT DRAWING LISTING
F70064        LOCK ASSY-L.E. WING FLAP ACTUATOR USE TO
F70065        SHIELD ASSY - ENGINE AIR INTAKE,JT4 ENG TO
F70066        PLUG ASSY - ENGINE OIL COOLING UNIT USED TO
F70067        ADAPTER - SPLINED SHAFT,INBD.FLAP DRIVE USED TO
F70068        ADAPTER - THRUST REVERSER WRENCH USED TO DRIVE
F70071-*      RETAINER - THRUST REVERSER BEARING USED TO HOLD
F70072-*      SLEEVE - THRUST REVERSER BEARING USED TO
F70073-*      SLEEVE - THRUST REVERSER BEARING USED TO
F70078        PLUG ASSY-OIL COOLER & FUEL AIR EXHAUST
F70081        PLUG ASSY - AIR COND. RAM AIR INLET PREVENTS
F70084        LOCK ASSY - THROTTLE RIGGING USED TO INDEX THE
F70085-*      WRENCH-SPANNER, BEARING RETAINER NUT. USED TO
F70086        PULLER KIT - GALLEY AND ENTRY DOOR HINGE USED
F70087        WRENCH SPANNER - BEARING RETAINING NUT USED TO
F70089        SUPPORT ASSY - T/R SOUND SUPRESSOR USED TO
F70102        GAGE ASSY - FUEL CONTROL USED TO LOCATE THE
F70103        ADAPTER - THRUST REVERSER AND SOUND SUPP USED
F70105        WRENCH - SOCKET, STAB. TRIM ACTUATOR USED WITH
F70106        WRENCH ASSY - METERING PIN USED TO TIGHTEN OR
F70107        WRENCH - HOOK SPANNER, 9 INCH DIAMETER USED TO
F70109        REPLACED BY C27080
F70109-*      WRENCH ASSY - STAB. TRIM ACTUATOR USED TO ADAPT
F70110        PROTRACTOR ASSY - NOSE GEAR RIGGING USED TO
F70111        COVER ASSY - JT4A ENGINE SOUND SUPRESSOR USED
F70112        LOCK ASSY - MLG OLEO USED TO LOCK THE MAIN
F70114        GUIDE ASSY-MLG INNER CYLINDER O-RING USED TO
F70118        LOCK - EXTERNAL RUDDER USED TO HOLD THE RUDDER
F70120        PLUG ASSY-ELECTRICAL RACK COOLING EXHAUST PORT
F70122        PLUG - ENGINE EXHAUST JT3D TO EXCLUDE FOREIGN
F70124        COVER - FAN EXHAUST, JT3D ENGINE COVER IS USED
F70126        PLUG - ENGINE INLET, JT3D ENGINE USED TO
F70130        WING TEST KIT - ATTITUDE WARNING SYSTEM USED TO
F70131        KIT - FLAP POSITION TRANSMITTER ASSY. USED FOR
F70132        SLING ASSY - TAIL CONE HOIST TO FACILITATE THE
F70137        SLING ASSY - ENGINE HOIST USED IN SHOP HANDLING
F70138        WRENCH ASSY - METERING PIN NUT USED DURING
F70140        HOIST ASSEMBLY-C.S.D. & ALTERNATOR MOUNTING
F70140        REPLACED BY F70333
F70141        CRADLE - THRUST REVERSER JT3D ENGINE. USED TO
F70142        KIT - ENGINE HANDLING, JT3D USED TO STORE OR
F70144        LOCK ASSY - WING LEADING EDGE FLAP TO LOCK THE
F70145        WRENCH - SPECIAL USED TO REMOVE UPPER AND LOWER
F70146        PLUG ASSY - AIR COND. RAM AIR INLET PREVENTS
F70147        LOCK ASSY - MLG OLEO TO LOCK THE MLG OLEO IN
F70150        PULLER ASSY - CONTROL ACTUATOR BEARING USED TO
F70151        PLUG ASSY-EXHAUST DUCT USED TO EXCLUDE FOREIGN
F70153        STRUT ASSY - CARGO LOADING BODY SUPPORT TO
F70156        SILL PROTECTOR - MAIN CARGO DOOR USED TO
F70157        LOCK ASSY - CARGO DOOR ACTUATOR USED TO LOCK
F70158        REMOVAL AND INSTALLATION KIT USED FOR THE
F70159        WRENCH ASSY- STAB. TRIM ACTUATOR SPRING USED IN
F70163        ENGINE INLET COVER FAN EXIT COVER USED TO
F70164        ENGINE INLET COVER USED TO PREVENT DAMAGED
F70165        ROD ASSY - CLAMSHELL DOOR JT3C ENG ONLY USED
F70166        TEMPLATE ASSY - CLAMSHELL DOOR (JT3C) USED TO
F70167-1      ASSY JIG - STABILIZER TRIM ACTUATOR USED TO
F70171        CLAMP ASSY - MAIN GEAR BRAKE BLEED USED TO
F70172        SLING - HORIZONTAL STABILIZER FOR REMOVAL AND
F70173        BOLT PULLER ASSY USED TO REMOVE THE FLAP TRACK
F70174        THRESHOLD ADAPTER SET - CARGO LOADING PROVIDES
F70175-1      WRENCH ADAPTER - FACE SPANNER, LUG USED TO
F70177        WEAR TEMPLATE - COVE LIP DOOR LATCH USED IN
F70178        HAND PRESS ASSY - ESCAPE SLIDE TO COMPRESS THE
F70179        DRILL JIG ASSY - FLAP TRACK & SPOILER TO LOCATE
F70180        BOLT PULLER - NACELLE STRUT MID SPAR TO REMOVE
F70183        FIXTURE ASSY - SERVO TORQUE MEASUREMENT TO TAKE
F70186        EXPANDER ASSY - MAIN GEAR AFT TRUNNION TO
F70188        PULLER ASSY - THRUST BRACE ATTACH BOLT USED TO
F70189        DRILL JIG KIT - NOSE GEAR DRAG BRACE LOCATE AND
F70190        ADAPTER 20/40 EXTERNAL SPLINE USED TO KEEP THE
F70193        HOIST & STOWAGE-APT I/R USED TO REMOVE AND
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
F70194-1      ADAPTER ASSY-TILT TABLE, VERT & DIR GYR TO
F70195        CLAMP - COUNTERSUNK NUT, FAN REVERSER TO HOLD
F70196        STRAP ASSY - RESTRAINING EMERGENCY EXIT TO
F70197        TOOL - BEARING REMOVAL FOR REMOVING 10-60545-36
F70199−1      SUPERSEDED BY A12007−1
F70199−13     REPLACED BY F70199−19
F70199−17     REPLACED BY F70199−20
F70199-1      INFLATION TOOL - TIRE
F70199-18     INFLATION TOOL - TIRE
F70199-19     INFLATION TOOL - TIRE
F70199-20     INFLATION TOOL - TIRE
F70200-1      INFLATION TOOL - STRUT
F70200-14     INFLATION TOOL - STRUT
F70206-1      ADAPTER ASSY - HOLLOW BOLT, FUEL LEAK TRACING
F70207−108    SUPERSEDED BY F70207−135
F70207−52     SUPERSEDED BY F70207−84
F70207−61     SUPERSEDED BY F70207−84
F70207−78     SUPERSEDED BY F70207−83
F70207−83     SUPERSEDED BY F70207−93
F70207−84     REPLACED BY F70207−98
F70207−84     SUPERSEDED BY F70207−108
F70207−93     REPLACED BY F70207−97
F70207−93     SUPERSEDED BY F70207−107
F70207−97     SUPERSEDED BY F70207−107
F70207−98     SUPERSEDED BY F70207−108
F70207-1      KIT - RIGGING PINS. USED TO IMMOBILIZE
F70207-107    KIT - RIGGING PINS. USED TO IMMOBILIZE
F70207-109    KIT - RIGGING PINS. USED TO IMMOBILIZE
F70207-128    KIT - RIGGING PINS. USED TO IMMOBILIZE
F70207-135    KIT - RIGGING PINS. USED TO IMMOBILIZE
F70207-2      KIT - RIGGING PINS. USED TO IMMOBILIZE
F70208        CANCELLED
F70209        COVERPLATE ASSY - FUEL VENT SYSTEM THIS ASSY IS
F70210        BREAKOUT BOX ASSY - OUTFLOW VALVE CONN. TO
F70211        BREAKOUT BOX ASSY - CONNECTOR THE ASSY IS
F70212        BREAKOUT BOX ASSY - CONNECTOR THIS IS INSTALLED
F70213        BREAKOUT BOX - CONTROL UNIT FIRE DETECT TO
F70215        TEST HARNESS - FUEL DUMP CHUTE ACTUATOR HARNESS
F70216        BREAKOUT BOX - CONTROL UNIT, WINDOW HEAT TO
F70221        TOOL KIT-CABLE INSERTION TO INSTALL RETAINING
F70227        GROOVE GAGE TO CHECK PRESSURE SEAL RETAINER
F70229        INSTL.SLING-INBD.& OUTBD. FLAPS USED TO INSTALL
F70230-1      TEMPORARY REPAIR TOOL - SELF-SEALING RIVETS,
F70240        ADJUSTING TOOL -THROTTLE CONTROL USED DURING
F70244-17     SLING ASSY - LIFTING, FUSELAGE
F70245        ADAPTER - BATTERY CHARGER TO BATTERY TO
F70246        SLING - FILLET FLAP ASSY TO REMOVE AND INSTALL
F70247        STOWAGE PALLETS - NEW INTERIOR STOWAGE PALLETS,
F70248        SPECIAL SPACER - RIGGING USED TO LOCATE ENGINE
F70249        APU ADAPTER STAND AND TRANS. CART THE F70249-1
F70250−1      REPLACED BY F70250−35
F70250−4      REPLACED BY F70250−35
F70250-2      LIFTING FIXTURE ASSY - MAIN CARGO DOOR
F70250-3      LIFTING FIXTURE ASSY - MAIN CARGO DOOR
F70250-35     LIFTING FIXTURE ASSY - MAIN CARGO DOOR
F70250-36     LIFTING FIXTURE ASSY - MAIN CARGO DOOR
F70252-1      ROLLER PALLET ADAPTER ADAPTS CONVENTIONAL
F70254        SEAL GUIDE ASSY - UMBRELLA ACTUATOR USED ON THE
F70255        WRENCH ADAPTER - HOUSING NUT, ACTUATOR THIS
F70256        WRENCH ADAPTER - LOCKNUT, ACTUATOR USED TO
F70257        SPANNER WRENCH - JAM NUT, ACTUATOR USED TO
F70258-1      PERSONNEL SAFETY BARRIER - MAIN DECK CARGO DOOR
F70258-5      PERSONNEL SAFETY BARRIER - MAIN DECK CARGO DOOR
F70259        BREAKOUT BOX ASSY USED TO TEST SPEED COMMAND
F70261        RIGGING TOOL - STABILIZER TRIM CONTROL USED TO
F70263-1      LOCK ASSY - NLG OLEO USED TO LOCK OLEO WHEN A/P
F70266-303    THREAD PROTECTOR SET-ENG MOUNT BOLT SETS USED
F70266-304    THREAD PROTECTOR SET-ENG MOUNT BOLT SETS USED
F70266-305    THREAD PROTECTOR SET-ENG MOUNT BOLT SETS USED
F70272        PIN REMOVAL TOOL - HORIZ STAB REAR SPAR USED TO
F70275        GAUGE - RIGGING,FAN THRUST REVERSER,JT3D TO
F70279        FORWARD HANGAR MOUNT - ENGINE (JT3D) TO PROVIDE
F70280        LOCATING TOOL - FAN DUCT DIAPHRAGM (JT3D TO
F70281        LOC.BLOCK SET - FAN REV COWL RING, JT3D TO HOLD
F70284-1      WEAR GAGE SET - GROUND POWER PLUG AND
F70286        TEST JIG - MLG DOOR ACTUATOR. USED TO HOLD,
F70287        TEST BOX - SPEED COMMAND MODULE USED TO TEST
F70289        COVERPLATE - AUXILIARY FUEL VENT SYSTEM TO
F70290        WRENCH - SPANNER REQUIRED TO TORQUE THE
F70291        ADAPTER SET - TORQUE WRENCH USED TO TORQUE
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
F70292        ROLLER SWAGING TOOL-SLEEVE,ROD &HEAD END
F70293        PULLER SET - FILLET FLAP HINGE PINS PROVIDE
F70296        COVER - LOUVERED SURGE BLEED PORT TO PREVENT
F70297        ROLLER SWAGING TOOL - BEARING HOUSING, DRIVE
F70298        SLING - VERTICAL FIN USED FOR VERTICAL FIN
F70300-1      FLAP DRIVE ADAPTER
F70301        SLING - INBOARD AILERON USED FOR INSTL/REMOVAL
F70303-1      TACHOMETER-ENGINE TRIM, REMOTE CONNECTS TO THE
F70303-2      TACHOMETER-ENGINE TRIM, REMOTE CONNECTS TO THE
F70303-3      TACHOMETER-ENGINE TRIM, REMOTE CONNECTS TO THE
F70304        ADAPTER - RESTRAINING LINE, VERTICAL FIN USED
F70305        HANGER - REAR MOUNT TO O/HD RAILS, JT3D TO
F70306        TORQUE ADAPTER - SKID DETECTOR NUT, MLG TO
F70307        SLING - ELEVATOR USED FOR INSTL/REMOVAL &
F70308        STANDARD TAG - SUPPORT EQUIPMENT
F70308−10     REPLACED BY F70308−18
F70308−11     REPLACED BY F70308−19
F70308−12     REPLACED BY F70308−20
F70308−13     REPLACED BY F70308−21
F70308−14     REPLACED BY F70308−22
F70308−16     REPLACED BY F70308−24
F70308−9      REPLACED BY F70308−17
F70310        PULLER KIT - WING BOTTLE PIN & BUSHING REMOVAL
F70311        ACTUATOR RESTRICTOR - FAN ENGINE COWL TO
F70312        KIT - CROWFOOT WRENCHES
F70312−24     SUPERSEDED BY ST2580−243
F70312−42     SUPERSEDED BY F70312−52
F70313-1      STANDARD BOX - SUPPORT EQUIPMENT
F70313-2      STANDARD BOX - SUPPORT EQUIPMENT
F70313-3      STANDARD BOX - SUPPORT EQUIPMENT
F70313-4      STANDARD BOX - SUPPORT EQUIPMENT
F70313-5      STANDARD BOX - SUPPORT EQUIPMENT
F70314        ALIGNMENT PIN - MLG AXLE LOCK BOLT TO ALIGN THE
F70315        TETHERING FITTING-OTBD WING AC RECOVERY
F70316−1      REPLACED BY F70316−140
F70316-140    AUXILIARY DEFUELING - EXTERNAL POWER CONTROL
F70318        TEST HARNESS - APU INLET & EXHAUST DOORS USED
F70319        CLAMP SET - TORSION BAR, OUTBD COVE LIP DOORS
F70320-1      HOLDING FIXTURE - CONTROL COLUMN
F70321        INSTALLATION MANDREL - SHRINK FIT BUSHNG
F70322        CLAMP SET - TORSION BAR, INBD COVE LIP DOOR TO
F70324-1      CANOPY - FWD ENTRY DOOR
F70326-1      TORQUE WRENCH ADAPTER-MANUAL STAB TRIM WHEEL
F70327        COMPASS SWING TRANSIT SUPT & TARGET AY PROVIDES
F70328-1      PROBE - FILM RESISTANCE MEASURING
F70329-1      RESTRAINT ASSY - OXYGEN MASK DOOR PROVIDES
F70329-11     RESTRAINT ASSY - OXYGEN MASK DOOR PROVIDES
F70329-2      RESTRAINT ASSY - OXYGEN MASK DOOR PROVIDES
F70330-1      STATIC BALANCE EQUIP - CONTROL SURFACES
F70330-104    STATIC BALANCE EQUIP - CONTROL SURFACES
F70330-2      STATIC BALANCE EQUIP - CONTROL SURFACES
F70330-3      STATIC BALANCE EQUIP - CONTROL SURFACES
F70330-4      STATIC BALANCE EQUIP - CONTROL SURFACES
F70330-87     STATIC BALANCE EQUIP - CONTROL SURFACES
F70330-99     STATIC BALANCE EQUIP - CONTROL SURFACES
F70331        REMOVAL & INSTALLATION EQUIPMENT - RUDDER PCU
F70332        RIGGING BAR - T.E. FLAPS TO FAIR IN LOWER FLAP
F70333−21     REPLACED BY F70333−24
F70333−21     REPLACED BY F70333−25
F70333-24     ADAPTER - CONSTANT SPEED DRIVE & A.C.
F70333-25     ADAPTER - CONSTANT SPEED DRIVE & A.C.
F70334        INSTL./REMOVAL SLING - NACELLE STRUT USED TO
F70335-1      LINE REAMING TOOL SET - ENTRY DOOR HINGE
F70336-1      SPANNER WRENCH - ASSIST HANDLE, MAIN ENTRY DOOR
F70337        TEST SET-"Q" SPRING RAM AIR INTAKE USED WITH AN
F70338        NON-RECOIL CAP, ENGINE FIRE EXTINGUISHER BOTTLE
F70339−1      REPLACED BY F70339−37
F70339−1      SUPERSEDED BY F70339−41
F70339−37     SUPERSEDED BY F70339−41
F70339-41     TEST EQUIPMENT - DOOR SNUBBER EXTENSION & RETRACTION
F70340        FUNCTIONAL TEST EQUIPMENT - FLAP AND SPOILER
F71125        LOCK ASSY - NOSE LANDING GEAR DOWN USED TO
F71126        LOCK ASSY - MAIN LANDING GEAR TO PREVENT
F71127        DOWN LOCK ASSY - MLG DOOR PREVENTS ACCIDENTAL
F71132        WRENCH - FACE PIN SPANNER USED TO REMOVE AND
F71133        WRENCH - FACE LUG SPANNER TO REMOVE AND INSTALL
F71135        PULLER ASSY - HORIZ. STAB. HINGE PIN TO INSTALL
F71136        BAR ASSY - AIRPLANE TOWING AND STEERING TOWING,
F71138        ADAPTER ASSY - AIRCRAFT JACKING TO PROVIDE A
F71139        ADAPTER ASSY - AIRCRAFT JACKING TO PROVIDE A
                                                                     www.sinters.ca
PART NUMBER                               DESCRIPTION
F71140              SUPPORT ASSY - VERTICAL FIN USED TO SUPPORT THE
F71141              SLING ASSY - ENGINE INSTALLATION USED TO
F71142              WRENCH ASSY - 2 1/8 INCH DBL HEX SOCKET USED TO
F71143              SLING ASSY - OUTBOARD WING PANEL TO REMOVE OR
F71160              PIN PULLER ASSY - MLG ACTUATOR BEAM USED TO
F71170              WRENCH ASSY - HOOK SPANNER USED DURING OVERHAUL
F71172              WRENCH - HOOK SPANNER USED TO TORQUE THE MLG
F71177              PIN ASSY - MLG SNUBBER FUNCTIONAL TEST PIN ASSY
F71181              PLUG ASSY - AIR COND. RAM AIR INLET USED TO
F71188              ADAPTER ASSY - HYDRAULIC PRESSURE USED DURING
F71189              WRENCH - 5.75 INCH SPANNER USED TO INSTALL AND
F71190              WRENCH ASSY - RUDDER SNUBBER USED TO HOLD
F71196              FIXTURE ASSY - ACTUATOR LOADER TEST USED;TO
F71198              PLUG ASSY - ENGINE OIL COOLING INLET TO PLUG
F71200-500          DOLLY ASSEMBLY WHEEL CHANGE
F71206              ADAPTER ASSY - AC GENERATOR/DRIVE MOUNT. USED
F71207              WRENCH - PIN SPANNER, SOCKET FOR INSTALLING AND
F71224              PLUG ASSY - ENGINE SURGE BLEED PORT TO KEEP
F71228-500          WRENCH - SPANNER SPLINED COUPLING TO HOLD THE
F71246              PLUG ASSY USED TO EXCLUDE FOREIGN MATTER FROM
F71247              PLUG ASSY - A-C GENERATOR EXHAUST TO EXCLUDE
F71252              REPLACED BY F71267
F71252-*            ADAPTER 16/32 SPLINE 3/4 MALE HEX
F71262              KIT ASSY - ELEVATOR SNUBBER ASSY TEST USED TO
F71263              FIXTURE ASSY-AILERON GEARBOX TO HOLD THE
F71264              LOCK ASSY - SPOILER ACTUATOR USED TO PREVENT
F71267-*            WRENCH ASSY - PINION GEAR TO PREVENT ROTATION
F71268              WRENCH ASSY - AIR COND. ADAPTER SEC. TO HOLD
F71272-1            SET ASSEMBLY - JIG ASSEMBLY, SLIDING WINDOW,
F71272-2            SET ASSEMBLY - JIG ASSEMBLY, SLIDING WINDOW,
F71279              JIG ASSY - MLG SNUBBER DRILL USED ON MLG
F71284              WRENCH - PISTON HEAD RETAINING NUT BAR USED TO
F71288              JIG ASSY-NOSE GEAR LOCK ACTUATOR USED DURING
F71289              WRENCH - BEARING RETAINER NUT SPANNER USED TO
F71290-1            WRENCH - BEARING RETAINER NUT SPANNER -1 IS
F71290-10           WRENCH - BEARING RETAINER NUT SPANNER -1 IS
F71290-2            WRENCH - BEARING RETAINER NUT SPANNER -1 IS
F71290-7            WRENCH - BEARING RETAINER NUT SPANNER -1 IS
F71291-500          COMPRESSOR - STAB. TRIM ACTUATOR SPRING. USED
F71292−17           CANCELLED
F71292-16           CLAMP ASSY - PROTRACTOR USED TO CLAMP A
F71292-17           CLAMP ASSY - PROTRACTOR USED TO CLAMP A
F71312              GUIDE ASSY - MLG INNER CYLINDER "O"RING USED TO
F71313-*            WRENCH - SOCKET, ROD END BEARING
F71313−1 THRU −25   REPLACED BY F71313−26 THRU F71313−50
F71327              PLATE ASSY - BOOST PUMP CAVITY LEAK TEST USED
F71329-*            LEAKAGE TRACING DEVICE - INTEGRAL TANK LEAKAGE
F71336-501          LOCK ASSY - STABILIZER TRIM USED TO HOLD THE
F71342              RING ASSY - SEAL INSTALLING MLG TOOL IS USED TO
F71349              DOOR ASSY - INTEGRAL TANK LEAKAGE TEST USED
F71355              AXLE PROTECTOR - MLG TO PROTECT THE AXLE ON THE
F71375              MACH TRIM SYSTEM ANALYZER THE MACH TRIM SYSTEM
F71399              PLUG ASSY-GEN.& HEAT EXCHANGER EXHAUST USED TO
F71401              ADAPTER KIT - JT3D ENGINE LIFT USED TO ADAPT
F71403              ADAPTER ASSY-TAIL PIPE & TR,JT3D FOR INSTL AND
F71418              WRENCH ASSY - REVERSIBLE RATCHET USED TO TORQUE
F71420              TEST SET & ADAPTER ASSY - HF COMM SYS USED AS A
F71421-501          FIXTURE - END PLAY CHECKING, STAB TRIM
F71422-*            TEST-JIG -CABLE TENSION, STABILIZER TRIM
F71422−200          SUPERSEDED BY F71422−839
F71422−501          SUPERSEDED BY F71422−200
F71422−501          SUPERSEDED BY F71422−829
F71422−829          REPLACED BY F71422−839
F71422−839          REPLACED BY F71422−844
F71422-500          TEST-JIG -CABLE TENSION, STABILIZER TRIM
F71422-844          TEST-JIG -CABLE TENSION, STABILIZER TRIM
F71430              PLUG - J57, JT3C ENGINE INLET USED TO EXCLUDE
F71435              WRENCH KIT - JT3D ENGINE CONTROL USED TO REMOVE
F71452              PLUG ASSY - AIR INLET USED TO PREVENT FOREIGN
F72701              TRACTION TOOL ASSY - TENSION TIE USED FOR
F72703              JACK ASSEMBLY - STABILIZER SUPPORT JACK ASSY
F72706              SLING ASSY - STABILIZER HOISTING USED FOR THE
F72710              PULLER KIT - FRONT AND REAR SPAR WING USED TO
F72711              JACK PAD ASSEMBLY - AFT BODY USED TO PROVIDE AN
F72712              SLING ASSY - AIRPLANE NOSE LIFTING USED TO LIFT
F72714              REPLACED BY F72988−1
F72714              REPLACED BY F72988−2
F72714              REPLACED BY F72988−3
F72714              REPLACED BY F72988−4
F72714-*            BEAM ASSY - ENGINE HANDLING.
                                                                      www.sinters.ca
PART NUMBER                             DESCRIPTION
F72717-*          PLUG-ENGINE INLET, JT8D FAN ENGINE USED TO
F72718            PLUG-CENTER ENGINE,JT8D USED TO PREVENT FOREIGN
F72719-500        TOWING EYE BOLT ASSEMBLY-MAIN GEAR
F72720            HOISTING ASSY - AUXILIARY POWER UNIT USED FOR
F72728            CLAMP ASSEMBLY - UPPER AND LOWER RUDDER USED TO
F72729            LOCK - ELEVATOR USED DURING REMOVAL AND INSTL.
F72731−1          REPLACED BY F72731−81
F72731−2          REPLACED BY F72731−82
F72731−54         REPLACED BY F72731−82
F72731−55         REPLACED BY F72731−82
F72731−56         REPLACED BY F72731−82
F72731−74         REPLACED BY F72731−82
F72731-102        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-114        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-115        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-116        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-117        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-118        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-119        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-120        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-121        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-130        ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-81         ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72731-82         ADAPTER ASSY & FUEL & OIL QTY TEST SETS USED TO
F72732            GROUND LOCK PIN ASSEMBLY MAIN GEAR USED TO
F72735-*          GROUND LOCK ASSY USED AS A SAFETY LOCK TO
F72735−12         SUPERSEDED BY F72735−13
F72735−2          REPLACED BY F72735−13
F72735-13         GROUND LOCK ASSY USED AS A SAFETY LOCK TO
F72735-4          GROUND LOCK ASSY USED AS A SAFETY LOCK TO
F72740            PLUG - AIR CONDITIONING RAM AIR INLET USED TO
F72747-*          TEMPLATE ASSY-CLAMSHELL DOOR CONTOUR USED TO
F72748            GROUND LOCK - RETRACTABLE TAIL SKID USED TO
F72751            LUG ASSEMBLY - TIE DOWN USED TO MOOR THE A/P
F72754            STAB RESTRAINING LINE ATTACHMENT FITTING TWO
F72756            WRENCH - MAIN GEAR ORIFICE TUBE USED TO REMOVE
F72757            PULLER - STAB. HINGE PIN AND BUSHING USED TO
F72759            LOCK ASSEMBLY - LEADING EDGE FLAPS USED TO
F72761            WRENCH - MAIN GEAR ORIFICE PLATE TORQUE USED TO
F72762            SPANNER WRENCH - NOSE GEAR USED TO LOOSEN AND
F72763            SPANNER WRENCH - NOSE GEAR STRUT ORIFICE USED
F72764            SPANNER WRENCH - NOSE GEAR STRUT ORIFICE USED
F72766            PULLEY PROTECTOR ASSEMBLY - FIN CRAWLWAY USED
F72767            WRENCH - SPANNER, GLAND NUT, MLG USED TO REMOVE
F72768            SPANNER WRENCH ASSEMBLY - NOSE GEAR USED TO
F72770            TEST FIXTURE - NOSE GEAR TRUNNION SWIVEL USED
F72771            LOCK ASSEMBLY - FLIGHT CONTROLS USED TO PREVENT
F72776            WRENCH - NOSE GEAR ACTUATOR ROD END. USED TO
F72777            RAIL EXTENSION ASSEMBLY - FWD AIRSTAIRS USED
F72778            PULLER - AXLE SLEEVE, LANDING GEAR USED FOR THE
F72779            FITTING - FUSELAGE,SAFETY LINE ATTACH USED TO
F72780            FITTING ASSEMBLY - NOSE MOORING USED TO MOOR
F72781            SLING ASSEMBLY - UPPER AND LOWER RUDDER USED TO
F72783-*          PLUG - FERRY FLIGHT ENGINE INLET USED TO BLOCK
F72785−101,−500   SUPERSEDED BY F72785−550
F72785−551        REPLACED BY F72785−573
F72785-106        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-107        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-108        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-11         TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-12         TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-13         TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-53         TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-54         TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-552        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-553        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-554        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-555        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72785-573        TEST EQPT - ELEVATOR/ RUDDER/ AILERON POWER
F72786            REPLACED BY F73015
F72786−101        REPLACED BY G34002
F72786−102        REPLACED BY G34002
F72786−121        REPLACED BY F72786−156
F72786−122        REPLACED BY F72786−156
F72786−181        REPLACED BY G34002
F72786-183        TEST SET - STALL WARNING COMPONENTS
F72786-3          TEST SET - STALL WARNING COMPONENTS
F72786-5          TEST SET - STALL WARNING COMPONENTS
F72789            KIT - TEFLON SEAL INSTL. TOOL TO INSTALL TEFLON
F72790-*          PROTRACTOR MOUNT ASSY-PILOTS & COPILOTS CONTROL
                                                                    www.sinters.ca
PART NUMBER                         DESCRIPTION
F72792        PULLER KIT - MLG AND TRUNNION BOLT TO PULL MLG
F72794        PLUG - FERRY FLIGHT ENGINE OUTLET USED TO BLOCK
F72796        PULLER - TENSION TIE USED TO REMOVE THE PINS IN
F72798        ROD END WRENCH - MLG ACTUATOR USED TO INSTALL
F72799        WRENCH - AILERON POWER CONTROL LINKAGE USED
F72800        WRENCH - FLAP TRANSMISSION GIMBAL NUT USED WITH
F72801        KIT - FLAP POSITION TRANSMITTER ASSY USED TO
F72802        WRENCH - FLAP TRANSMISSION TORQUE USED TO
F72803        WRENCH - FLAP TRANS. TORQUE LIMITER USED TO
F72804        HOLDING FIXTURE - FLAP TRANSMISSION USED TO
F72805        WRENCH - FLAP TRANSMISSION TORQUE LIMIT USED TO
F72806        WRENCH -FLAP TRANSMISSION TORQUE LIMITER USED
F72808-1      TEST JIG - AUTO THROTTLE CLUTCH TO BENCH TEST
F72810        CONFIDENCE GAGE -ANGLE OF AIRFLOW SENSOR USED
F72812 -1     TEST SET - FUEL QTY, OIL QTY, & VOLUMETRIC TOP
F72813        TOOL ASSEMBLY - BEARING STAKING TO STAKE BAC-
F72814        FIXTURE ASSEMBLY - MAIN GEAR ACTUATOR TO
F72815-15     CURTAIN ASSEMBLY - GALLEY DOOR USED TO PROTECT
F72817-100    COVER ASSEMBLY - GALLEY DOOR USED ON QC
F72818        COVER ASSEMBLY - CARGO DOORS USED ON 727 QC
F72819        BEARING PULLER ASSEMBLY USED TO REMOVE BEARINGS
F72820        BEARING PULLER ASSEMBLY USED TO REMOVE BEARINGS
F72821        COVER ASSEMBLY - CSD DISCONNECT TO COVER THE
F72822        MANDREL ASSEMBLY - BEARING SWAGING TO SWAGE THE
F72823-36     TEST ADAPTER ASSY - STATIC PORT
F72823-37     TEST ADAPTER ASSY - STATIC PORT
F72823-38     TEST ADAPTER ASSY - STATIC PORT
F72823-39     TEST ADAPTER ASSY - STATIC PORT
F72823-40     TEST ADAPTER ASSY - STATIC PORT
F72826        INSTALLATION KIT TO INSTALL FRONT SPAR AND REAR
F72827        LOCK FOOT ASSY - CARGO PALLET THE LOCK FOOT
F72828        ALIGNMENT FIXTURE - THRUST REVERSER TO CHECK
F72831−1      REPLACED BY F72831−21
F72831−10     REPLACED BY F72831−21
F72831−14     REPLACED BY F72831−21
F72831-21     TEST FIXTURE ASSEMBLY - FLAP POSITION. USED IN
F72842        PLUG - CENTER ENGINE INLET, JT8D USED TO
F72843        SUPPORT ASSEMBLY - STABILIZING JACK TO
F72845        PULLER ASSEMBLY - NOSE GEAR DRAG BRACE USED TO
F72846        FIXTURE ASSY - CONTROL MECHANISM TEST TO APPLY
F72847        EYEBOLT ASSEMBLY - MLG TOWING USED FOR TOWING
F72849−1      SUPERSEDED BY COMMERCIAL EQUIPMENT
F72850        FIXTURE ASSEMBLY - OUTBOARD WING FLAP TO
F72851        FIXTURE ASSEMBLY - INBOARD WING FLAP TO INSTALL
F72855        SUPERSEDED BY F73015
F72856        REPLACED BY
F72856−1      REPLACED BY F72856−132
F72856−1      REPLACED BY G34002
F72856−132    REPLACED BY G34002
F72856−2      REPLACED BY F72856−142
F72856-1      CALIBRATION EQPT - AIRFLOW SENSOR
F72856-132    CALIBRATION EQPT - AIRFLOW SENSOR
F72856-133    CALIBRATION EQPT - AIRFLOW SENSOR
F72856-142    CALIBRATION EQPT - AIRFLOW SENSOR
F72856-2      CALIBRATION EQPT - AIRFLOW SENSOR
F72857-1      FIXTURE ASSY - ANGLE OF AIRFLOW SENSOR THIS IS
F72858        REPLACED BY F73015
F728581       SYNCRO INDICATOR ASSY STALL WARNING TEST
F72859 -1     ELECTRICAL TESTER STALL WARNING
F72859 -2     ELECTRICAL TESTER STALL WARNING
F72859 -3     ELECTRICAL TESTER STALL WARNING
F72863        REPLACED BY F70333
F72865        PRESSURE STAKING TOOL USED FOR PRESSURE STAKING
F72866        COVER ASSEMBLY - APU EXHAUST TO KEEP FOREIGN
F72867−1      REPLACED BY C27065−20
F72867-1      ADAPTER ASSY-CONTROL WHEEL,TORQUE AND FORCE
F72871        WRENCH - SLEEVE, BODY FUEL TANK TO REMOVE AND
F72872        TOOL - INSTL/REMOVAL. SUMP BELLOWS TO INSTALL
F72874        PULLER - CRANK RELEASE MECHANISM,NLG USED TO
F72875        KIT - WRENCH, BODY FUEL TANK TO INSTALL AND
F72876        SLING ASSEMBLY - FORWARD INTAKE DUCT USED TO
F72877        SAFETY PIN - ELEVATOR FEEL COMPUTER TO PREVENT
F72878        FLANGE - PRESSURE TEST L.P. DUCTS USED DURING
F72879        SPECIAL SPACER - RIGGING,ENGINE START TO LOCATE
F72880-1      THREAD PROTECTOR - LANDING GEAR AXLE TO PROTECT
F72881        TEST JIG - VENTRAL STAIRS MECHANISM USED TO
F72882        SPANNER WRENCH ASSY-MLG SIDE STRUT USED TO
F72883        ADAPTER ASSY SET USED TO LUBRICATE AFT FLAP
F72884        HYDROSTATIC TESTER - FUEL FEED LINES USED TO
F72885        LOCK PIN - TAIL SKID GROUND SAFETY USED TO LOCK
                                                                www.sinters.ca
PART NUMBER                         DESCRIPTION
F72886        BOOTSTRAP EQUIP. SIDE ENGINE, JT8D USED TO
F72887        WRENCH - BOX
F72890        BOOTSTRAP EQUIP. CENTER ENGINE JT8D USED WITH
F72891-1      INDICATOR - APU RPM, TEST SET PROVIDES A MEANS
F72891-20     INDICATOR - APU RPM, TEST SET PROVIDES A MEANS
F72892        WRENCH-CABLE ADJUSTER CARGO DOOR BALANCE
F72894        PULLER ASSY - WING SPAR TERMINAL BUSHING USED
F72896        BUSHING STAKING TOOL - APU DUCT FLANGE SUPPORT.
F72897        SPANNER WRENCH - THRUST NUT- TE FLAP CARRIAGE.
F72898        TEST JIG - TRIM MECHANISM AILERON USED TO
F72899        WRENCH ADAPTER - MLG MAN EXT SHAFT BRG RETAINER
F72900        TORQUE ADAPTER- AILERON CONTROL CAPTAINS TO
F72901        TEST PLUG SET,727 FUEL SYSTEM,LEAK CHECK USED
F72902        WRENCH ASSY-QUAD ADJ BOLT,SPOILER ACT. USED TO
F72903-24     OIL BREATHER PRESSURE TEST EQUIP-JT8D PROVIDE
F72904        SLING ASSY - INBD & OUTBD FLAPS USED FOR
F72906        GAGE SET - MLG TRUNNION BEARING TO MEASURE
F72907        ADAPTER ASSY-LUBRICATION FTG,INBD AIL. TAB ROD.
F72908        HOIST MOUNT ASSY - STABILIZER JACKSCREW USED AS
F72909        SPRING COMPRESSR-CARGO DOOR SPRNG CRTRDG USED
F72911        AUTO PACK TRIP-ENGINE FAIL SIMULATR ASSY TO
F72912        LOCK-SET - GROUND SPEED BRAKE LOCK ASSY ARE
F72913-1      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-10     AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-11     AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-13     AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-2      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-3      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-4      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-5      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-6      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72913-8      AXLE & THREAD PROTECTOR - MAIN/NOSE GEAR TO
F72914        TORQUE ADAPTER ASSY - RUDDER CONTROL POWER UNIT
F72915        TORQUE WRENCH ADAPTER ASSY - CLAMSHELL JAM NUT.
F72916        ROLLER SWAGING ASSY - BEARING HOUSING, CONTROL
F72917−1      SUPERSEDED BY F72917−19
F72917-19     TEST CONSOLE - GROUND FAULT PROTECTION SYSTEM,
F72918-1      DUMMY TEST RELIEF VALVE - MODULAR SYSTEM
F72918-2      DUMMY TEST RELIEF VALVE - MODULAR SYSTEM
F72919        TEST FIXTURE - PRESSURE OPERATED SELECTOR VALVE
F72920        SPANNER SOCKET - MANUAL MAIN GEAR EXTENSION
F72922        TORQUE ADAPTER - MLG FWD TRUNNION BOLT USED TO
F72923        LUBE TOOL SET - CARRIAGE SIDE ROLLERS USED TO
F72924-1      HOLDER - STAB TRIM JACKSCREW BALL NUT AND SCREW
F72925        WRENCH-SET - BEARING NUT FIN STAB.HINGE USED TO
F72926        DRILL FIXTURE KIT - REWORK, STATIC PORT USED TO
F72928−33     REPLACED BY F72928−52
F72928−34     REPLACED BY F72928−53
F72928−36     SUPERSEDED BY F72928−52
F72928−37     SUPERSEDED BY F72928−53
F72928−43     SUPERSEDED BY F72928−54
F72928-33     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-34     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-52     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-53     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-54     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-58     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-62     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72928-63     AIR PRESSURE REGULATOR - ELEVATOR FEEL
F72930        TORQUE ADAPTER - MLG SIDE STRUT TO TORQUE FWD.
F72931        ADJUSTABLE SPREADER - RUDDER PCU INSTL -
F72932        TEST EQUIP-EXHST INSTL, RAM AIR MOD SYST TO
F72933        0-RING INSTALLATION-STAB SET TRIM TO INSTALL 0-
F72935        ADAPTER - ENG FUEL FEED LINE EVACUATION
F72936        RIGGING PROTRACTOR - NOSE GEAR STEERING USED TO
F72937        INSTALLATION GAUGE - DRIVE INSTALLATION, WING
F72938        TOOL SET - PNEUMATIC DUCT PRESS SYSTEM FOR
F72939        WRENCH SET - THRUST REVERSER TO ENGINE ATTACH
F72940        CLAMP SET - NOSE WHEEL STEERING CYLINDER USED
F72941        ADAPTER - PRESSURE LIMITING, GREASE GUN TO
F72942-1      LUBRICATION SET ENTRY,CARGO,SERVICE & GALLEY
F72943        DOLLY - INSTALLATION AND REMOVAL, JT8D, THRUST
F72945        SLING - ELEVATOR USED FOR INSTL/REMOVAL &
F72946-1      DOLLY, WORK STAND,& ADAPTER-THRUST RVRSR TO
F72946-2      DOLLY, WORK STAND,& ADAPTER-THRUST RVRSR TO
F72947        TEST FIXTURE SET - POWER CONTROL UNIT, FLIGHT
F72948        PROTECTOR - 727 MLG AFT TRUNNION TO PROTECT
F72949-1      TOOL - 727/737 FUEL DRIPSTICK OPERATING TO
F72950−127    REPLACED BY F72950−138
F72950−128    REPLACED BY F72950−139
                                                                www.sinters.ca
PART NUMBER                         DESCRIPTION
F72950−2      SUPERSEDED BY F72950−127
F72950−5      SUPERSEDED BY F72950−128
F72950-1      A.P.U TRANSPORTATION EQUIPMENT THE
F72950-138    A.P.U TRANSPORTATION EQUIPMENT THE
F72950-139    A.P.U TRANSPORTATION EQUIPMENT THE
F72950-158    A.P.U TRANSPORTATION EQUIPMENT THE
F72950-3      A.P.U TRANSPORTATION EQUIPMENT THE
F72950-4      A.P.U TRANSPORTATION EQUIPMENT THE
F72951-1      WATER MANOMETER - TEST EQUIPMENT
F72952−1,−2   SUPERSEDED BY F72952−14,−15
F72952-14     ADAPTER SET - PROTRACTOR, FWD THRUST LEVER USED
F72952-15     ADAPTER SET - PROTRACTOR, FWD THRUST LEVER USED
F72952-3      ADAPTER SET - PROTRACTOR, FWD THRUST LEVER USED
F72953        INSTL. FIXTURE - VENTRAL STAIRS TO POSITION FWD
F72954        HOIST ADAPTER - AUXILIARY POWER UNIT TO HANDLE
F72955        ADAPTER - TORQUE WRENCH, LG TRUNNION NUT TO
F72956        ROD GUIDE - THRUST REVERSER ACTUATOR TO AID IN
F72957        REPLACED BY C0902
F72957-1      TOWBAR - AIRPLANE TOWING AND STEERING USED FOR
F72957-48     TOWBAR - AIRPLANE TOWING AND STEERING USED FOR
F72957-51     TOWBAR - AIRPLANE TOWING AND STEERING USED FOR
F72957-58     TOWBAR - AIRPLANE TOWING AND STEERING USED FOR
F72958        TOOL SET - LANDING LIGHT ADJUSTMENT TO ADJUST
F72959-*      SPANNER WRENCH AN STANDARD TYPE
F72960        DOWN LOCK - MAIN GEAR DOORS TO PREVENT
F72961        SUPPORT EQUIP - CENTR ENG AFT DUCT INSTL TO
F72962        TORQUE TOOLS - SIDE STRUT SPINDLE BOLT, NUT AND
F72965        TETHERING FITTINGS-727 AFT BODY A/P RECOVERY.
F72966        HOLDING TOOL - DOOR CABLE, NG WHEEL WELL
F72967        RIGGING BEAM - AILERONS, ZERO POSITION CONSISTS
F72968        RIGGING BEAM-FLAPS, ZERO POSITION THE HAND HELD
F72969        RIGGING TOOL-RUDDER & RUDDER TAB. USED TO
F72970        BREAKOUT BOX-SP-50 & SP-150 SINGLE PITCH
F72971        BREAKOUT BOX SP-150 AUTO PILOT TEST, ROLL AND
F72972        BREAKOUT BOX SP-150 AUTO PILOT TEST, ROLL AND
F72973-10     GAGE-PT7 PRESSURE,ENGINE TRIM USED TO CHECK THE
F72974        LOCATING JIG-AUX POWER UNIT MOUNT INSTL TO BE
F72975        BEARING INSTL TOOL-TORQ LIMITER-FLAP
F72976        PULLER-TORQUE TUBE, WHEEL WELL DOOR, NOSE GEAR
F72977−19     REPLACED BY F72977−33
F72977−19     SUPERSEDED BY F72977−45
F72977−23     DELETED BY F72977−33
F72977−33     SUPERSEDED BY F72977−39
F72977−39     SUPERSEDED BY F72977−46
F72977−44     REPLACED BY F72977−47
F72977−45     REPLACED BY F72977−47
F72977−46     REPLACED BY F72977−47
F72977−47     REPLACED BY F72977−62
F72977-62     GAGE EQPT - HYDRAULIC BRAKE SYSTEM PRESSURE
F72978        RIGGING BEAM - ELEVATORS, ZERO POSITION A HAND
F72979        PROTRACTOR - SPOILER LOCKOUT INSTL. MAIN GEAR.
F72980        SLING - NOSE COWL, NO. 1 & 3 ENGINES USED TO
F72982        RUDDER LOCK - UPPER OR LOWER USED WHEN POWER
F72984        SET- SUPPORT EQUIP, DISPATCH, APU REMOVAL.
F72985        ACTUATOR - LOCK OUT FITTING, L.E. SLAT NO. 4&5
F72986        ADAPTER-TORQUE WRENCH, MLG UP-LOCK, TEST WRENCH
F72987-1      TEST EQUIPMENT-BODY TANK CAVITY VENT USED TO
F72987-2      TEST EQUIPMENT-BODY TANK CAVITY VENT USED TO
F72988−1      REPLACED BY F72988−71
F72988-2      ATTACH BEAMS ENGINE HANDLING EQUIP USED WITH
F72988-3      ATTACH BEAMS ENGINE HANDLING EQUIP USED WITH
F72988-4      ATTACH BEAMS ENGINE HANDLING EQUIP USED WITH
F72988-71     ATTACH BEAMS ENGINE HANDLING EQUIP USED WITH
F72989-1      CABLE-DIRECTIONAL GYRO EXTENSION USED TO
F72991        ALIGNMENT PIN M/G BEAM USED TO ALIGN BUSHINGS
F72992        STAKING KIT-ENGINE CRANK NO 1&3 CONTROL BUSHING
F72993        RIGGING BEAM-FLAP TRACK K-HOLE POSITION USED TO
F72995-1      DRAIN ASSEMBLY - SAMPLING, BODY FUEL TANK USED
F72996        VACUUM TESTER-FLEX FUEL FEED LINE SHROUD TO
F72998-1      ADAPTER CABLE-N1 SIMULATOR USED TO CONNECT
F72999-1      WRENCH SET-PNEUMATIC SYS, BALL JOINT WRENCHES
F73000        UNIT-TEST DRIVE, TE FLAP TRANSMISSION USED TO
F73001        TAIL JACK ASSY-CARGO LOADING USED WITH THE TAIL
F73001−1      REPLACED BY F73001−101
F73002        STRUT ASSY-TAIL JACK, 727-200F USED WITH TAIL
F73003        FIXTURE-NOSE LANDING GEAR BUILD-UP USED TO
F73004        TEST FIXTURE-CARGO LOADING TAIL JACK
F73005        TEST EQUIPMENT-INBOARD AND OUTBOARD FLAP
F73006        SPRING EXTENDER-COUNTER BALANCE, VENTRAL
F73007        ELECTRONIC TEST EQUIPMENT-ELEVATOR FEEL AND
                                                                www.sinters.ca
PART NUMBER                           DESCRIPTION
F73008         TEST FIXTURE-ELEVATOR FEEL & CENTERING UNIT
F73009         SLING-NOSE COWL ASSY CENTER ENGINE USED TO LIFT
F73010−1       REPLACED BY F73010−18
F73010−18      SUPERSEDED BY F73010−27
F73010-27      LEAKAGE TEST CHAMBER-FWD LAVATORY DRAIN USED
F73011         WRENCH-WHEEL RETAINING NUT, MLG USED TO LOOSEN
F73012         SWAGING EQPT - ROLLER USED TO SWAGE BEARINGS
F73013         TEST SET - REDUCTION GEARBOX USED TO SUPPORT
F73014         SPANNER WRENCH-SIDE STRUT LOWER LINK, MAIN
F73015−1       SUPERSEDED BY F73015−20
F73015-20      TEST BOX - STALL WARNING MODULE
F73017         GAGE EQUIPMENT-MAIN LANDING GEAR TRUNNION
F80000−1       SUPERSEDED BY F80000−7
F80000-7       ADAPTER - AIRCRAFT JACKING, STA. 294.5
F80001-1       PAD - AIRCRAFT JACKING
F80002         REPLACED BY F80114
F80002-24      CRADLE & HOISTING ASSY - APU
F80003         CANCELLED
F80003−11      SUPERSEDED BY F80219−45,−46,−46,68,−69
F80003−3,−4    REPLACED BY F80003−11
F80003−4,−11   REPLACED BY F80219
F80003-11      RING - HOIST (CANCELED)
F80004         SOCKET - DRAG STRUT BOLT, M.L.G. USED TO HOLD
F80005         REPLACED BY F72957
F80005-10      TOWBAR ASSEMBLY
F80005-13      TOWBAR ASSEMBLY
F80006−1       REPLACED BY F80006−38
F80006−30      SUPERSEDED BY F80006−34
F80006−32      SUPERSEDED BY F8006−37
F80006−34      SUPERSEDED BY F80006−51,−54
F80006−37      SUPERSEDED BY F80006−52
F80006−38      SUPERSEDED BY F80006−53
F80006−53      SUPERSEDED BY F80008−67
F80006-2       SLING ASSY - HORIZONTAL STABILIZER
F80006-51      SLING ASSY - HORIZONTAL STABILIZER
F80006-52      SLING ASSY - HORIZONTAL STABILIZER
F80006-54      SLING ASSY - HORIZONTAL STABILIZER
F80006-67      SLING ASSY - HORIZONTAL STABILIZER
F80007         CANCELED, USE F72913
F80011         REPLACED BY F70333
F80011-1       CRADLE ADAPTER ASSY - A.C. GENERATOR & CSD
F80011-16      CRADLE ADAPTER ASSY - A.C. GENERATOR & CSD
F80012-1       ADAPTER ASSY - PIN SPANNER
F80013-1       ADAPTER ASSY - PIN SPANNER
F80014−1       SUPERSEDED BY F80014−16
F80014-16      HANDLING EQUIPMENT - STABILIZER JACKSCREW
F80014-2       HANDLING EQUIPMENT - STABILIZER JACKSCREW
F80016−19      REPLACED BY F80234−1
F80016-19      LOCK ASSY - OLEO, MAIN GEAR
F80017−1       REPLACED BY C27001−1
F80017−1       REPLACED BY C27001−16
F80017−1       REPLACED BY F80017−19
F80017−19      REPLACED BY C27001−16
F80017−2       REPLACED BY F80017−23
F80017−23      REPLACED BY F80017−33
F80017-33      LOCK ASSY - GROUND/FLIGHT SPOILERS
F80018-1       SPANNER WRENCH
F80018-2       SPANNER WRENCH
F80020-5       ADAPTER WRENCH
F80021-1       SPANNER WRENCH
F80023         REPLACED BY C09002
F80023-1       WHEEL MOUNT - TOWBAR
F80024         REPLACED BY C09002
F80024−7       REPLACED BY F80199−12
F80024-56      TOWBAR GROUP
F80025−1       SUPERSEDED BY F80025−30
F80025-30      SLING ASSEMBLY - RUDDER
F80026-1       ADAPTER - ELEVATOR HOISTING
F80027−1       SUPERSEDED BY F80027−13
F80027−13      SUPERSEDED BY F80027−18
F80027-18      LOCK ASSEMBLY - HORIZONTAL STABILIZER
F80032-1       WRENCH ADAPTER - FACE SPANNER, LUG
F80033-1       ADAPTER ASSY - WRENCH, HOOK SPANNER
F80033-8       ADAPTER ASSY - WRENCH, HOOK SPANNER
F80035−1       REPLACED BY F80035−18
F80035-18      SLING ASSEMBLY - VERTICAL TAIL
F80036 -1      ADAPTER - SLOTTED 45 SPANNER
F80038         REPLACED BY F80213
F80038-1       SLING ASSY - TRAILING EDGE FLAPS
F80039-1       HOIST ASSEMBLY - AUXILIARY POWER UNIT
                                                                 www.sinters.ca
PART NUMBER                          DESCRIPTION
F80040-15     LOCK ASSY - GROUND SPOILER ACTUATOR
F80040-2      LOCK ASSY - GROUND SPOILER ACTUATOR
F80047-1      TOOL ASSY - REMOVAL, HORIZONTAL STABILIZER
F80048−61     REPLACED BY F80048−87
F80048−61     REPLACED BY F80048−88
F80048−62     REPLACED BY F80048−88
F80048−84     REPLACED BY F80048−89
F80048−84     REPLACED BY F80048−90
F80048−87     REPLACED BY F80048−89
F80048−88     REPLACED BY F80048−90
F80048-57     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-58     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-59     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-60     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-78     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-79     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-87     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-88     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-89     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-90     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80048-95     LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT
F80049−1      REPLACED BY F80049−12
F80049−12     REPLACED BY F80049−18
F80049−2      SUPERSEDED BY F80049−17
F80049-12     LOCK ASSEMBLY - FLIGHT CONTROLS
F80049-17     LOCK ASSEMBLY - FLIGHT CONTROLS
F80049-18     LOCK ASSEMBLY - FLIGHT CONTROLS
F80051-1      WRENCH ADAPTER - FACE SPANNER, LUG
F80053-1      WRENCH ASSY - FACE SPANNER, LUG
F80055-1      TRAMMEL BAR ASSY - STABILIZER TRIM ACTUATOR
F80056-1      PLUG SET - NOSE WHEEL STEERING CYLINDER
F80057-1      SUPPORT ASSY - FLAP DRIVE SCREW
F80060-6      ADAPTER - AIRCRAFT JACKING
F80062-55     DOLLY ASSY - JT8D TRANSPORTATION & INSTL
F80063−500    SUPERSEDED BY F80063−501
F80063-501    FIXTURE - ELEVATOR RIGGING & RESTRAINING
F80065-1      SPRING COMPRESSOR
F80068-1      SUPPORT ASSY - AFT FUSELAGE JACKING POINT
F80075−1      SUPERSEDED BY F72867−1
F80076-1      EXHAUST PLUG - AUXILIARY POWER UNIT
F80080−122    SUPERSEDED BY F80080−130
F80080−129    SUPERSEDED BY F80080−129
F80080−36     SUPERSEDED BY F80080−128
F80080-1      FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-128    FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-129    FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-130    FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-2      FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-3      FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-37     FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-38     FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-4      FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-51     FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-52     FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-53     FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80080-54     FUEL TANKS AND VENT SYSTEMS TESTING KITS. USED
F80085-1      TEST FIXTURE - CYLINDER ASSY, FEEL ACTUATOR
F80085-12     TEST FIXTURE - CYLINDER ASSY, FEEL ACTUATOR
F80088−1      REPLACED BY F80088−3
F80088-3      HOLDING FIXTURE - UPPER ORIFICE SUPPORT TUBE,
F80091-1      THRESHOLD ADAPTER SET - CARGO LOADING
F80091-3      THRESHOLD ADAPTER SET - CARGO LOADING
F80093-1      PLUG - ENGINE EXHAUST TO PREVENT FOREIGN MATTER
F80096−1      REPLACED BY F80096−4
F80096-4      HOLDING FIXTURE - FWD TRUNNION BEARING HOUSING,
F80096-7      HOLDING FIXTURE - FWD TRUNNION BEARING HOUSING,
F80101-1      CART ASSY - THRUST REVERSER TRANSPORTATION
F80106-1      WRENCH - LUG SPANNER
F80106-2      WRENCH - LUG SPANNER
F80109−3      REPLACED BY F80109−9
F80109-9      LOCK ASSY - THRUST REVERSER ISOLATION VALVE
F80110-1      SLING ASSY - THRUST REVERSER INSTL. & HANDLING
F80111        REPLACED BY C09002
F80111-16     COUPLER ASSY - TOWBAR
F80111-18     COUPLER ASSY - TOWBAR
F80111-22     COUPLER ASSY - TOWBAR
F80113−34     SUPERSEDED BY F80113−50
F80113−44     SUPERSEDED BY F80113−61
F80113−50     REPLACED BY F80113−105
F80113−64     REPLACED BY F80113−105
F80113−70     REPLACED BY F80113−88                             www.sinters.ca
PART NUMBER                               DESCRIPTION
F80113-105         KIT - ROLLER SWAGE
F80113-37          KIT - ROLLER SWAGE
F80113-61          KIT - ROLLER SWAGE
F80113-88          KIT - ROLLER SWAGE
F80113-95          KIT - ROLLER SWAGE
F80114−1           REPLACED BY F80114−12
F80114−1           REPLACED BY F80114−25
F80114−12          SUPERSEDED BY F80114−25
F80114-25          CRADLE, GARRETT APU’S - HOIST EQPT
F80115−1 thru −9   REPLACED BY F80115−10 thru −18
F80115-10          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-10          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-11          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-12          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-13          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-14          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-15          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-16          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80115-17          THREAD PROTECTOR AND ALIGNMENT TOOLS- MAIN GEAR
F80117-1           ROLLER SWAGE ASSY - (BEARING 10-60545-205S)
F80117-10          ROLLER SWAGE ASSY - (BEARING 10-60545-205S)
F80118-1           KIT - BEARING RETENTION/REMOVAL
F80118-15          KIT - BEARING RETENTION/REMOVAL
F80118-27          KIT - BEARING RETENTION/REMOVAL
F80118-31          KIT - BEARING RETENTION/REMOVAL
F80118-38          KIT - BEARING RETENTION/REMOVAL
F80120-1           TEST FIXTURE - ELEVATOR & RUDDER CENTERING UNIT
F80122−1           SUPERSEDED BY F80122−11
F80122−4           SUPERSEDED BY F80122−12
F80122−7           SUPERSEDED BY F80122−13
F80122−8           SUPERSEDED BY F80122−14
F80122−9           SUPERSEDED BY F80122−15
F80122-11          ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE
F80122-12          ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE
F80122-13          ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE
F80122-14          ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE
F80122-15          ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE
F80122-16          ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE
F80126−1           SUPERSEDED BY F80126−9
F80126-9           PULLER EQPT - SLEEVE AXLE ASSEMBLY, MAIN
F80129-100         ANTISKID - AUTO BRAKE-AUTO SPEED BRAKE TESTER
F80134−16          REPLACED BY F80134−51
F80134−5           SUPERSEDED BY F80134−49
F80134-1           RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET
F80134-2           RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET
F80134-3           RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET
F80134-4           RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET
F80134-46          RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET
F80134-49          RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET
F80135−1           REPLACED BY F80135−13
F80135−10          REPLACED BY F80135−13
F80135-10          CABLE ASSEMBLY - HYDRAULIC LEAKAGE CHECK TO
F80135-13          CABLE ASSEMBLY - HYDRAULIC LEAKAGE CHECK TO
F80136             REPLACED BY C49001
F80136−1           SUPERSEDED BY F80136−32
F80136−26          SUPERSEDED BY F80136−33
F80136-32          TOOL KIT - APU DELETION
F80136-33          TOOL KIT - APU DELETION
F80137             CANCELLED
F80137-1           POSITIONER TOOL- ACTUATOR ROD END (CANCELED)
F80138-1           EXTENSION CABLE - VERTICAL GYRO CONNECTS THE
F80139-1           EXTENSION CABLE - VERTICAL GYRO
F80140-1           TOOL-REMOVAL,SUMP DRAIN VALVE,BODY TANK TO
F80141-1           THREAD PROTECTOR & ALIGNMENT PIN - 737 MAIN
F80142-31          INST. TOOL-FUEL TANK, BODY, AUXILIARY USED TO
F80143-1           SPECIAL WRENCH KIT-BODY FUEL TANK TO PROVIDE AN
F80143-2           SPECIAL WRENCH KIT-BODY FUEL TANK TO PROVIDE AN
F80144-1           DOOR ASSY-PURGING, BODY FUEL TANK TO CLOSE THE
F80145-1           DOOR ASSY - PURGING, CENTER INTEGRAL WING FUEL
F80145-4           DOOR ASSY - PURGING, CENTER INTEGRAL WING FUEL
F80147             CANCELLED
F80147             SUPERSEDED BY F80212
F80147-1           TOOL FORCE CHECKING, RUDDER PEDAL (CANCELED)
F80148             REPLACED BY F80172
F80150-1           LOCK - RUDDER, PCU REMOVED
F80151-1           TEMPLATE - CONTOUR CHECK T/R DEFLECTOR DOOR
F80153-1           SAFETY PIN - ELEV. FEEL COMPUTER
F80154-3           SPACER - ENGINE FUEL SHUTOFF VALVE SWITCH
F80155-1           PLUG SET - RAM AIR EXHAUST LEAK TEST
F80157-1           WRENCH - AFT AIRSTAIRS HANDRAIL HINGE PIN
                                                                     www.sinters.ca
PART NUMBER                          DESCRIPTION
F80158−1      SUPERSEDED BY F80158−17
F80158-17     TRUNNION PIN & BEARING PULLER SET - NOSE GEAR
F80160−1      REPLACED BY C32019−1
F80160-1      EXTENSION - ORIFICE TUBE, NOSE GEAR SHOCK STRUT
F80161-10     CLAMP - NOSE STEERING & PISTON POSITON CABLES
F80162-1      CLAMP - NOSE GEAR STEERING ACTUATOR ROD
F80163-1      EXPANDER ASSY - TENSION SPRING, NOSE GEAR
F80164−11     REPLACED BY F80164−35
F80164-28     APU AIR INLET SCREEN
F80164-35     APU AIR INLET SCREEN
F80165−1      REPLACED BY F80165−42
F80165-42     TEST SET - DOOR PROXIMITY SENSOR/ACTUATOR GAP
F80166-1      TEST FIXTURE - PRESSURE RELIEF VALVE, FLAME
F80167−1      REPLACED BY F80167−13
F80167-13     LUBRICATION TOOL SET - T.E. FLAP CARRIAGE
F80168-1      SOCKET - AXLE NUT
F80168-2      SOCKET - AXLE NUT
F80168-3      SOCKET - AXLE NUT
F80169-1      SPRING EXPANDER SET - 737 MAIN LANDING GEAR
F80170-1      TEST MANIFOLD - BYPASS VALVE, AILERON/ELEVATOR
F80171-1      WRENCH - TORQUE, GALLEY & ENTRY DOOR. USED FOR
F80172−1      REPLACED BY F80172−7
F80172-7      PRESSURE TEST DOOR - CENTER INTEGRAL WING TANK
F80173−1      SUPERSEDED BY F80173−10
F80173-10     PRESSURE TEST DOOR ASSY - AUX FUEL TANK TO SEAL
F80174−100    REPLACED BY F80235
F80174-100    FIXTURE - MAIN LANDING GEAR SHOCK STRUT TEST
F80175-1      PRESSURE TEST DOOR ASSY - CENTER BLADDER WING
F80176−1      REPLACED BY F80176−8
F80176-8      TORQUE WRENCH ADAPTER - MAIN LANDING GEAR
F80177-14     BOLT REMOVAL EQPT - HORIZONTAL STABILIZER
F80178-1      SETTING TOOL-FWD ENTRY DOOR LATCH ROLLER
F80179-1      LIGHT ADJUSTMENT TOOL - RETRACTABLE LANDING
F80180-1      FIXTURE SET - COMPASS SWINGING
F80181-1      DRILL JIG - AILERON TRIM INPUT SHAFT
F80183-1      THREAD PROTECTOR - CENTER SECTION, HORIZ. STAB
F80184-1      RIGGING PROTRACTOR - NOSE GEER STEERING
F80185-4      FITTING - AIRPLANE TIEDOWN
F80186-10     ALIGNMENT FIXTURE - T.E. FLAP DRIVE, RIGHT
F80187−1      SUPERSEDED BY F80187−6
F80187-6      LOCATING TOOL - OVERCENTER MEASUREMENT, MAIN
F80188        REPLACED BY C49004
F80188-17     SLING - HANDLING AUXILIARY POWER UNIT
F80189-1      HOLDING FIXTURE - BRAKE VALVE ASSY
F80190-1      SCREWDRIVER, OFFSET - RUDDER BALANCE WEIGHT
F80191-1      LOCATING TOOL - SENSOR ACTUATOR, N0SE GEAR
F80192-1      ADAPTER - TORSION TEST L.E. SLATS DETENT ARM
F80193-1      TEST PLUG - MAIN GEAR DAMPER ASSY
F80195-1      DOWEL SET - THRUST LEVER, CONTROL STAND
F80196-1      CHECKING BAR - ELEVATOR MACH TRIM ACTUATOR
F80197-5      WRENCH SET - LIMIT SWITCH, FLAP CONTROL UNIT
F80198−1      SUPERSEDED BY F80198−12
F80198−10     SUPERSEDED BY F80198−15
F80198−4      SUPERSEDED BY F80198−13
F80198−6      SUPERSEDED BY F80198−8
F80198−8      SUPERSEDED BY F80198−14
F80198-12     PLUG GAGE - LANDING GEAR NUT
F80198-13     PLUG GAGE - LANDING GEAR NUT
F80198-14     PLUG GAGE - LANDING GEAR NUT
F80198-15     PLUG GAGE - LANDING GEAR NUT
F80199        REPLACED BY C09002
F80199−1      REPLACED BY F80199−12
F80199-12     TOWBAR HEAD - NOSE GEAR
F80201-1      DRAIN TOOL-FUEL SUMP USED FOR COLLECTING FUEL
F80202-1      ALLEN ADAPTER - NOSE WHEEL STEERING CYLINDER
F80203−1      REPLACED BY C28010
F80203-1      BOTTLE - BOOST PUMP PRIMING
F80204-1      WRENCH SET - TRANSFER VALVE, YAW DAMPER, RUDDER
F80205-1      BEARING SWAGING EQUIPMENT
F80206-1      BREAKOUT BOX - CABIN PRESSURE CONTROL UNIT
F80207-1      INSTL / REMOVAL EQUIPMENT - APU HEAT SHIELD
F80208−1      REPLACED BY F80208−15
F80208-15     TESTER - ANTI-SKID/AUTO SPEED BRAKE
F80209-1      RIGGING BEAM - FLAPS
F80211−1      SUPERSEDED BY F80211−18
F80211−121    SUPERSEDED BY F80211−153
F80211−145    SUPERSEDED BY F80211−154
F80211−153    REPLACED BY F80211−164
F80211−153    SUPERSEDED BY F80211−164
F80211−18     SUPERSEDED BY F80211−43
                                                                www.sinters.ca
PART NUMBER                             DESCRIPTION
F80211−26       SUPERSEDED BY F80211−44
F80211−43       SUPERSEDED BY F80211−116
F80211−44       SUPERSEDED BY F80211−55
F80211−60       SUPERSEDED BY F80211−72
F80211−63       SUPERSEDED BY F80211−73
F80211−71       SUPERSEDED BY F80211−117
F80211−72       SUPERSEDED BY F80211−118
F80211−73,−64   SUPERSEDED BY F80211−76
F80211-164      PLUG SET - PNEUMATIC DUCT PRESSURIZATION
F80212−1        SUPERSEDED BY F80212−19
F80212−19       SUPERSEDED BY F80212−30
F80212-30       ADAPTER - RUDDER PEDAL FORCE CHECK
F80213          REPLACED BY F80038
F80213−1        SUPERSEDED BY F80213−73
F80213−27       SUPERSEDED BY F80213−45
F80213−45       SUPERSEDED BY F80213−78
F80213-73       SLING EQUIPMENT - TRAILING EDGE FLAPS
F80213-78       SLING EQUIPMENT - TRAILING EDGE FLAPS
F80215-1        SPACER GAGE - T/R DEFLECTOR DOOR FAIRING INSTL.
F80216-1        MISC. TOOL - SUPPORT ASSY XMTR, FLAP POSITION
F80216-2        MISC. TOOL - SUPPORT ASSY XMTR, FLAP POSITION
F80217−1        SUPERSEDED BY F80217−101
F80217−101      SUPERSEDED BY F80217−103
F80217−103      SUPERSEDED BY F80217−122
F80217−122      SUPERSEDED BY F80217−125
F80217−125      SUPERSEDED BY F80217−139
F80217-139      TEST SET - SP177/SP300 AUTOPILOT,
F80218−1        SUPERSEDED BY F80218−40
F80218−31       SUPERSEDED BY F80218−41
F80218−38       SUPERSEDED BY F80218−42
F80218-40       TEST SET - FORCE TRANSDUCER, CONTROL WHEEL
F80218-41       TEST SET - FORCE TRANSDUCER, CONTROL WHEEL
F80218-42       TEST SET - FORCE TRANSDUCER, CONTROL WHEEL
F80219−1        SUPERSEDED BY F80219−21
F80219−2        SUPERSEDED BY F80219−22
F80219−21       REPLACED BY F80219−32
F80219−21       SUPERSEDED BY F80219−45
F80219−22       SUPERSEDED BY F80219−33
F80219−22       SUPERSEDED BY F80219−46
F80219−32       SUPERSEDED BY F80219−45
F80219−32       SUPERSEDED BY F80219−46
F80219−32       SUPERSEDED BY F80219−47
F80219−33       SUPERSEDED BY F80219−47
F80219−33       SUPERSEDED BY F80219−48
F80219−45       REPLACED BY F80219−68
F80219−47       REPLACED BY F80219−69
F80219-46       LOAD INDICATING SYSTEM ENGINE INSTL. EQUIPMENT
F80219-48       LOAD INDICATING SYSTEM ENGINE INSTL. EQUIPMENT
F80219-68       LOAD INDICATING SYSTEM ENGINE INSTL. EQUIPMENT
F80219-69       LOAD INDICATING SYSTEM ENGINE INSTL. EQUIPMENT
F80220-1        FUNCTIONAL TEST - TRANSFER MECHANISM AILERON
F80221-1        TEST SET - PROXIMITY SENSORS THRUST REVERSER
F80222−1        REPLACED BY F80222−11
F80222-1        PROTRACTOR - AILERON TAB ALIGNMENT
F80222-11       PROTRACTOR - AILERON TAB ALIGNMENT
F80223-1        RADIO ALTITUDE SIGNAL SIMULATOR
F80223-2        RADIO ALTITUDE SIGNAL SIMULATOR
F80223-3        RADIO ALTITUDE SIGNAL SIMULATOR
F80224−1        REPLACED BY F80224−58
F80224−58       SUPERSEDED BY F80224−60
F80224−60       REPLACED BY F80224−79 (−100 THRU −500)
F80224−60       SUPERSEDED BY F80224−79 (−600 THRU −900)
F80224-79       TEST EQPT - FLIGHT SPOILER POWER CONTROL UNIT
F80225-19       SP177 DUAL CHANNEL FCC TEST EQUIPMENT
F80226-1        FITTING ASSY-NOSE MOORING USED WITH A SUITABLE
F80226-2        FITTING ASSY-NOSE MOORING USED WITH A SUITABLE
F80226-3        FITTING ASSY-NOSE MOORING USED WITH A SUITABLE
F80227-1        TEST CABLE - N1 SIMULATION
F80228−1        REPLACED BY F80228−15
F80228-15       ADAPTER CABLE - N1 SIMULATOR
F80229−17       SUPERSEDED BY F80229−57
F80229−18       SUPERSEDED BY F80229−58
F80229−19       SUPERSEDED BY F80229−59
F80229−21       SUPERSEDED BY F80229−60
F80229−49       SUPERSEDED BY F80229−61
F80229-20       TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-48       TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-52       TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-55       TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-56       TEST EQPT- FIRE EXTINGUISHING SYSTEM
                                                                  www.sinters.ca
PART NUMBER                          DESCRIPTION
F80229-57     TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-58     TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-59     TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-60     TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-61     TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80229-69     TEST EQPT- FIRE EXTINGUISHING SYSTEM
F80230-1      RIGGING BEAM - ELEVATOR INDEX PLATE INSTL
F80231−1      REPLACED BY F80231−629
F80231−2      REPLACED BY F80231−630
F80231−3      REPLACED BY F80231−631
F80231-629    KIT TOOL - HORIZONTAL STABILIZER & FIN, BUSHING
F80231-630    KIT TOOL - HORIZONTAL STABILIZER & FIN, BUSHING
F80231-631    KIT TOOL - HORIZONTAL STABILIZER & FIN, BUSHING
F80232-1      TEST FIXTURE - CONTROL VALVE ASSY, T.E. FLAP
F80233-1      TEST EQUIPMENT PLUG - RAM AIR DUCT INSTL
F80234-1      LOCK ASSY - MLG, SHOCK STRUT
F80235-1      TEST SET - SHOCK STRUT, MLG
F80236-1      TEMPLATE SET-STRIKER ADJUSTMENT, STOWAGE BIN
F80237        REPLACED BY C21001
F80237−1      SUPERSEDED BY F80237−13
F80237-13     TEST SET - EQUIPMENT COOLING SYSTEM PERFORMANCE
F80238-1      SLING ASSY - SLAMMR RADAR ANTENNA,
F80239−1      SUPERSEDED BY F80239−7
F80239−12     SUPERSEDED BY F80239−18
F80239−18     SUPERSEDED BY F80239−21, −22 & −25
F80239−7      SUPERSEDED BY F80239−12
F80239-21     SAFETY LANYARD - PERSONNEL, ENGINE MAINTENANCE
F80239-22     SAFETY LANYARD - PERSONNEL, ENGINE MAINTENANCE
F80239-25     SAFETY LANYARD - PERSONNEL, ENGINE MAINTENANCE
F80240-1      RESTRAINT EQUIPMENT - PASSENGER WINDOW
F80241−1      REPLACED BY F80241−9
F80241-9      RESTRAINT - TETHERING, STA322.5, FWD ENTRY DOOR
F80243-1      FIXTURE - TETHERING, REAR SPAR VERT. FIN, AFT
F80244-1      RESTRAINT EQPT - MLG, AIRPLANE RECOVERY
F80245-1      RESTRAINT EQPT - OUTBD T.E. FLAP TRACKS, WBL
F80246-1      CHECKING EQUIPMENT - AXIAL PLAY, CARRIAGE
F80247        CANCELLED
F80247−60     SUPERSEDED BY C55004−1
F80248−1      REPLACED BY F80248−8
F80248−8      REPLACED BY C27028
F80248-8      RIGGING FIXTURE - ELEVATOR TAB
F80249−1      SUPERSEDED BY F80249−4
F80249−2      SUPERSEDED BY F80249−7
F80249-7      TORQUE SOCKET - BALL NUT/SCREW ASSY STABILIZER
F80250-1      INSTALLATION TOOL - O-RING, FEEL COMPUTER
F80251-1      BEARING INSTL & REMOVAL EQPT - ACTUATOR
F80252-1      SEAL INSTL SET - COMPUTER ASSY
F80253-1      SPANNER WRENCH - HINGE BEARING, HORIZONTAL
F80254        SPECIFICATION - WRENCH, BOX-END, RATCHET-AFT
F80254        REPLACED BY F80257
F80255−1      REPLACED BY F80255−10
F80255-10     ALIGNMENT & GUIDE EQUIP - HORIZ STABILIZER
F80255-11     ALIGNMENT & GUIDE EQUIP - HORIZ STABILIZER
F80255-12     ALIGNMENT & GUIDE EQUIP - HORIZ STABILIZER
F80256−1      SUPERSEDED BY F80256−10
F80256-10     RIGGING GAUGE - VALVE INSTL, LANDING GEAR
F80257-1      WRENCH, BOX END, RATCHET - AFT CONE BOLT
F80258-1      TEST EQUIPMENT - WING DRY BAY PRESSURIZATION
F80259-1      ADAPTER - TORQUE WRENCH
F80259-2      ADAPTER - TORQUE WRENCH
F80259-3      ADAPTER - TORQUE WRENCH
F80259-4      ADAPTER - TORQUE WRENCH
F80260−1      REPLACED BY F80260−7
F80260-7      WRENCH - PILOTED SPANNER
F80261-1      GAGE - LEADING EDGE FLAP ACTUATOR
F80262-1      VISE JAW EQPT - L.E. ACTUATOR,
F80263-1      HOLDING FIXTURE - PISTON, L.E. SLAT ACTUATOR
F80264-1      JAW SET - VISE
F80265-1      MANIFOLD - TEST, ACTUATOR, LEADING EDGE FLAP
F80266−1      SUPERSEDED BY F80266−30
F80266−30     SUPERSEDED BY F80266−40
F80266-40     TEST EQPT - LE FLAP ACTUATOR
F80267-1      TEST FIXTURE - L.E. SLAT ACTUATOR
FME65−73761   HOLDING FIXTURE − MAIN LANDING GEAR
G07001        FITTING EQPT - CABLE SUPPORT AIRPLANE LIFT
G07002        JACKING BAR EQPT - MLG AXLE
G07003        TETHER FITTING EQUIPMENT- TAIL SECTION
G09001        DATA SHEET - 747 TOWBAR DESIGN
G12001        KIT - RIGGING PIN
G20001        SWAGING EQUIPMENT - FORE FLAP LEVER BEARING
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
G20002        RETAINER - KEYING POST, SPRING LATCH REMOVAL,
G20003        STAKING EQPT - MLG, ACTUATOR
G20004        STAKING EQPT - BLG AND WLG RETRACT ACTUATOR,
G21001        LOCKOUT - TEST SWITCH, N2 ENGINE SPEED DISCRETE
G21002        TEST EQPT - PRSRZ OUTFLOW VALVE ALT SIMULATION
G21003        PROBE - STATIC PRESSURE
G21004        VACUUM HARNESS - CABIN PRESSURE CONTROLLER
G21005        MUFFLER - EXHAUST, COOLING FAN, ELEC/ELEX BAY
G21006        ADJUSTMENT TOOL - TENSION, CARD LOCK
G21007-1      AIR FLOW CUP - LO/HI BLOW TEST
G22001        TEST EQUIP - LOW RANGE RADIO ALTIMETER SYSTEM
G22002        SPLINE ALIGNMENT GUIDE - AUTOTHROTTLE
G22003−1      SUPERSEDED BY G22003−50
G22003−107    SUPERSEDED BY G22003−132
G22003−108    SUPERSEDED BY G22003−133
G22003−132    REPLACED BY G22003−134
G22003−133    REPLACED BY G22003−135
G22003−2      SUPERSEDED BY G22003−51
G22003−50     SUPERSEDED BY G22003−83
G22003−51     SUPERSEDED BY G22003−84
G22003−83     SUPERSEDED BY G22003−92
G22003−84     SUPERSEDED BY G22003−93
G22003−92     SUPERSEDED BY G22003−107
G22003−93     SUPERSEDED BY G22003−108
G22003-134    TEST EQUIPMENT - AUTOTHROTTLE CLUTCH
G22003-135    TEST EQUIPMENT - AUTOTHROTTLE CLUTCH
G22004        ACCESS PAD - ELECTRONIC CIRCUIT CONNECTOR
G23001        TRANSFERRED TO BAE SYSTEMS
G23001−1      SUPERSEDED BY G23001−23
G23001−23     SUPERSEDED BY G23001−32
G23001−32     SUPERSEDED BY G23001−37
G23003        COVER - ANTENNA, LOWER FUSELAGE
G24002        HOIST EQPT - INSTALLATION/REMOVAL, BATTERY, APU
G24003        TEST BOX - LIGHTNING PROTECTOR
G24004        HOIST EQPT - MAIN BATTERY AND E57 BATTERY
G24005−1      SUPERSEDED BY G24005−24
G24005-24     DISPATCH EQUIPMENT - IDG, CF-80C2 ENGINE
G24006-1      SUPPORT HOOK - ENGINE POWER FEED CABLE, PW4000
G24007        DISPATCH EQPT - INTEGRATED DRIVE GENERATOR,
G24008        REPLACED BY G24009
G24008        DISPATCH EQPT - INTEGRATED DRIVE GENERATOR, RB-
G24009-1      IDG DISPATCH KIT - RB211-524 ENGINE
G24011        REPLACED BY A71015
G24011−1      SUPERSEDED BY G24011−47
G24011-47     HOIST SYSTEM - RB211, CF6-50 & JT9D ENGINE
G24013        REPLACED BY A71013
G24013-1      ACCESSORY ADAPTER - HOIST SYSTEM RB211 AND CF6-
G24015        DISPATCH EQPT - APU GENERATOR, BLANKING PLATE
G25001        LIFTING FIXTURE - BIG BIN
G25002        SUPPORT - UPPER DECK LIFT CAR
G25003        TEST FIXTURE - MAIN DECK CARGO ENTRY DOOR GUIDE
G25004        GAGE - DADO PANEL & DECOMPRESSION VENT
G25005        SWITCH ACTUATOR - DOOR INTRLK SWITCH, GALLEY
G25007        TEST EQPT - CARGO PDU LIMIT SWITCH ASSY
G25008        EQUIPMENT - FALL PROTECTION, 747 S.U.D. DOOR
G25009        HANDLING EQUIPMENT - UPPER DECK SLIDE LOADING &
G25010-1      GANTRY EQUIPMENT - PASSENGER SEAT
G25010-98     GANTRY EQUIPMENT - PASSENGER SEAT
G25012-1      ANTI-RATTLE NUT WRENCH KIT
G26001        TEST EQUIPMENT - FIRE EXTINGUISHER SYSTEM
G26002        INSTL/REMOVAL EQPT - FIRE EXTINGUISHER BOTTLE
G26003        BREAKOUT BOX - DA-15P CONNECTOR
G26004−1      REPLACED BY G26004−10
G26004−1      SUPERSEDED BY G26004−39
G26004−10     SUPERSEDED BY G26004−39
G26004−23     SUPERSEDED BY G26004−40
G26004−26     SUPERSEDED BY G26004−49
G26004−49     SUPERSEDED BY G26004−55
G26004-39     EXTENDER CARD - ELECTRONIC CARD FILE
G26004-40     EXTENDER CARD - ELECTRONIC CARD FILE
G26004-55     EXTENDER CARD - ELECTRONIC CARD FILE
G26005−1      SUPERSEDED BY G26005−9
G26005−13     REPLACED BY G26005−17
G26005−13     REPLACED BY G26005−24
G26005−17     REPLACED BY G26005−24
G26005−9      REPLACED BY G26005−24
G26005-24     ADAPTER - HOT WIRE ANEMOMETER
G26006        CLEANING EQPT - SMOKE DETECTION SYSTEM
G26007        INSTL/REMOVAL EQPT - FIRE EXTINGUISHER BOTTLE
G26008        TEST EQPT- NON-METERED DISCHARGE TUBING, CARGO
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
G26009        TEST EQPT-ENGINE FIRE EXTINGUISHING SYSTEM
G26010        INSTALLATION/REMOVAL EQPT - EXTINGUISHER BOTTLE
G27001        LOCK OPEN EQPT - INBD SPOILER ACTUATOR NO. 5 &
G27002        LOCK OPEN EQPT - INBD SPOILER ACTUATOR NO. 6 &
G27003        TEST EQPT - XMSN & TORQUE LIMITER, TE FLAP
G27004        SLING - FLAP TRACK
G27005        SWAGING EQPT - SEAL RING, OUTBD XMSN, OUTBD TE
G27006        SAWGING EQPT - SEAL RING, INBD XMSN, OUTBD TE
G27007        SWAGING EQPT - SEAL RING, INBD XMSN, INBD TE
G27008        LOCK EQPT - RUDDER ACTUATOR
G27009        TEST BOX - ALTERNATE DRIVE MOTOR L/E FLAP
G27010        SLING ASSY, LOWER RUDDER INSTL. & REMOVAL
G27011        SPLINE ADAPTER - TORQUE SENSOR, INBD & OUTBD TE
G27012        SLING EQUIPMENT - UPPER RUDDER
G27013        RIGGING SET - INBD KRUEGER FLAP, NO. 11 THRU
G27014        LOAD TEST FIXTURE - LOWER RUDDER SLING ASSY
G27015        PROOF LOAD FIXTURE - SLING, UPPER RUDDER
G27016        HOIST FRAME EQPT - UPPER & LOWER RUDDER, P.C.P.
G27017        BAR - RIGGING, FLAP TRACK FAIRING, (NO. 1 & 8
G27018        RIGGING EQUIPMENT - SPEED BRAKE CONTROL
G27019        SLING - FLAP TRACK
G27020        SPLINE ADAPTER - OUTBD XMSN, INBD T.E. FLAP
G27022        TEST EQUIPMENT - BACKLASH, L.E. FLAP ROTARY
G27023        TEST FIXTURE - FLUTTER, UPPER RUDDER
G27024        LOCK - FLAP LEVER
G27025        TEST EQPT - T.E. FLAP ALTERNATE DRIVE MOTOR
G27026        TEST FIXTURE - INBD/OUTBD TE FLAP DRIVE POWER
G27027        CONTROL BOX EQPT - POWER PACK,T.E. FLAP DRIVE
G27028        MEASURING EQUIPMENT - VARIABLE CAMBER FLAP
G27029        SPANNER SOCKET - POWER UNIT, INBOARD T.E. FLAP
G27030        TORQUE ADAPTER - HORIZONTAL STABILIZER ACTUATOR
G27032        ACTUATOR LOCK - OUTBOARD SPOLER
G27033-1      ADAPTER CABLE - OUTBOARD AILERON LOCKOUT
G27033-2      ADAPTER CABLE - OUTBOARD AILERON LOCKOUT
G27034        SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBD TE
G27035        SLING EQPT - INBD/OUTBD ELEVATOR
G27036        MEASURING EQPT - HORIZ STAB HINGE BEARING
G27037        LOCK EQUIPMENT - T.E. FLAP SYSTEM
G27038        RIGGING BAR - T.E. FLAP
G27039        TEST JIG EQPT - LOCKOUT MECHANISM, OUTBOARD
G27040        PERSONNEL LANYARD EQPT - WING
G27042        SLING - FLAP TRACK
G27043        HANDLING EQUIPMENT - HORIZONTAL STABILIZER
G27047        INSTL & REMOVAL SLING EQPT - MAIN CARRIAGE
G27062        TEST ASSY - INBD & OUTBD FORE FLAP OF OUTBD TE
G28001        AIR MOVING EQUIPMENT - AUXILIARY FUEL TANK
G28002        TEST EQPT - VOLUMETRIC TOP-OFF CALIBRATION
G28003        TEST EQPT - FUEL FEED AND EPR SYSTEM PRESSURE
G28004        HOLD-OPEN DEVICE - SHUTOFF VALVE, HORIZONTAL
G28005−10     SUPERSEDED BY G28005−14
G28005−14     REPLACED BY G28005−42
G28005−14     REPLACED BY G28005−23
G28005−18     REPLACED BY G28005−42
G28005−18     REPLACED BY G28005−23
G28005−23     REPLACED BY G28005−42
G28005−29     SUPERSEDED BY G28005−35
G28005−29     REPLACED BY G28005−42
G28005−35     REPLACED BY G28005−42
G28005−42     REPLACED BY G28005−48
G28005-48     CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE
G28006        ADAPTER EQUIPMENT - CALIBRATION, FUEL QUANTITY
G28006-1      ADAPTER EQUIPMENT - CALIBRATION, FUEL QUANTITY
G28008        TEST ADAPTER EQPT - FUEL LINE PRESSURE
G28009        PLUG EQUIPMENT - HORIZONTAL STABILIZER/APU FUEL
G28010        SUMP DRAIN - HORIZONTAL STABILIZER
G28011        PLUG - FUEL VENT SCOOP, WING TIP
G28012        TEST EQPT - PRESSURE/LEAKAGE, FUEL LINES &
G28013        TEST EQPT - OVERRIDE/JETTISON FUEL PUMP, FAULT
G28014-1      ADAPTER EQPT - FUEL SUMP DRAIN VALVE
G28014-15     ADAPTER EQPT - FUEL SUMP DRAIN VALVE
G28015        DRAIN FITTING - SURGE TANK
G28016        HOSE PULL - FUEL XFR LINE, HORIZ STAB
G28017        TEST EQPT - HORIZ STAB FUEL TANK AND VENT
G28018−1      SUPERSEDED BY G28018−26
G28018−26     REPLACED BY G28018−28
G28018−3      REPLACED BY G28018−29
G28018−3      REPLACED BY G28018−29
G28018−7      REPLACED BY G28018−31
G28018-02     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-04     TEST EQPT - ENGINE FUEL FEED MANIFOLD
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
G28018-05     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-06     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-26     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-28     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-29     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-31     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28018-32     TEST EQPT - ENGINE FUEL FEED MANIFOLD
G28019        TEST EQUIPMENT - FUEL TANK LEAK
G28020        WRENCH - SHOUD. APU FUEL DRAIN
G28021        GAGE ASSY - PRESSURE TEST, FUEL TANK MANIFOLD
G28022        BLANKING PLATES & PLUG EQPT - AUXILIARY TANK,
G28023-1      TEST/RECOVERY DEFUEL EQPT - AUXILIARY TANK,
G28023-30     TEST/RECOVERY DEFUEL EQPT - AUXILIARY TANK,
G28024        PALLET - AUXILIARY FUEL TANK INSTL
G28025        SLING - AUXILIARY FUEL TANK
G28026        GAGE - GO-NO-GO, AUX. FUEL TANK
G28031        CHECK FIXTURE- REFUEL, VENT/TRANSFER, AUX FUEL
G29001        TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP
G29003        DISPATCH EQUIPMENT - ENGINE DRIVEN HYDRAULIC
G29004        DISPATCH EQUIPMENT - EDP SYSTEM, CF6-50 ENGINE
G29005        DISPATCH EQPT - ENGINE DRIVEN HYDRAULIC PUMP,
G29006        BLANKING PLATE - INBD HYDRAULIC RESERVOIR
G30001        BLOCK - HEIGHT GAGE, WIPER ARM
G32002        TEST SLUG EQPT - POSITION PROXIMITY SWITCH
G32003        TEST SET - NOSE GEAR INTERLOCK ACTUATOR
G32004        GAGE EQPT - TRUNNION & DRAG LINK FITTING INSTL,
G32005        GAGE EQPT - VERT SPRT FITTING, INBD TRUNNION
G32007        PROTECTOR - AXLE, WING & BODY LANDING GEAR
G32008        THREAD PROTECTOR - AXLE, MAIN & NOSE LANDING
G32009        TEST EQUIPMENT - RETRACT ACTUATOR, WING MLG
G32010        PULLER EQUIPMENT - AXLE SLEEVE, M.L.G. AND
G32011        WRENCH ADAPTER - OVERSIZE GLAND NUT, WING, AND
G32012        BRAKE PULLER EQPT - MAIN LANDING GEAR
G32013        TEST FIXTURE - MLG BRAKE ROD.
G32014        TEST EQPT - TORQUE SENSOR, BRAKE CONTROL
G32015        SUPPORT STAND - BODY GEAR STEERING ACTUATOR
G32017        TORQUE EQPT - TRUCK POSITIONER ACTUATOR, WING
G32018        TEST EQPT - HARD GROUND JUMPER
G32019        ROLLER SWAGING EQPT - OUTBD TRUNNION BEARING
G32021−1      SUPERSEDED BY G32021−18
G32021-18     FORCE GAGE EQPT - LANDING GEAR LEVER
G32022        TEST EQUIPMENT - TORSION LINE FREE PLAY CHECK,
G32023        TEST JIG - ACTUATOR, TRUCK POSITIONING, MAIN
G32025        BRAKE PULLER EQPT - MAIN LANDING GEAR
G32027        ALIGN GUIDE - BOLT STEERING MECHANISM, BODY
G32028        JACK - WING/BODY MAIN LANDING GEAR
G32030        TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR
G32031        SLING ASSY - WING LANDING GEAR, SIDE AND JURY
G32032        HOLDING EQPT - INNER CYLINDER AND METERING ROD,
G32033        SLING EQPT - LOWER SEAL REM/INSTL, NLG
G32035        TEST FIXTURE - DOWNLOCK ACTUATOR, WLG & BLG
G32036        PIN ASSY EQPT - GROUND LOCK, NOSE LANDING GEAR
G32037        TORQUE ADAPTER - RETRACT ACTUATOR, WLG
G34001        CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR
G34001        REPLACED BY G34002
G34002-1      CALIBRATION EQPT - ANGLE OF ATTACH SENSOR
G34002-2      CALIBRATION EQPT - ANGLE OF ATTACH SENSOR
G34002-3      CALIBRATION EQPT - ANGLE OF ATTACH SENSOR
G34002-4      CALIBRATION EQPT - ANGLE OF ATTACH SENSOR
G34002-5      CALIBRATION EQPT - ANGLE OF ATTACH SENSOR
G34004−1      SUPERSEDED BY G34004−11
G34004−11     SUPERSEDED BY G34004−17
G34004-17     ADJUSTMENT EQPT - WEATHER RADAR ANTENNA MOUNT
G34012−1      SUPERSEDED BY G34012−21
G35001        HOSE - LEAK TEST, OXYGEN SUPPLY SYSTEM
G35002        RESTRAINING EQPT - PSU OXYGEN DOORS
G35003-1      RESTRAINING EQPT - PSU OXYGEN DOORS
G35003-4      RESTRAINING EQPT - PSU OXYGEN DOORS
G36001        PLUG - DUCT PRESSURE TEST
G36002        PLUG - DUCT PRESSURE TEST
G36003        PLUG - DUCT PRESSURE TEST
G36004        PLUG - DUCT PRESSURE TEST
G36005        PLUG - DUCT PRESSURE TEST
G36006        PLUG EQUIPMENT - DUCT TEST
G36007        PLUG EQUIPMENT - DUCT TEST PUROFLEX FLANGES
G36008        PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES
G36009        PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST
G36010        PLUG EQUIPMENT - DUCT PRESSURE TEST (65B90147
G36011        PLUG EQUIPMENT - PRESSURE TEST, 69B89711
G36012        PLUG EQUIPMENT - DUCT TEST, 14A466 & 14A469
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
G36013        PLUG EQUIPMENT - DUCT TEST, JANITROL 12JOB
G36014        PLUG EQUIPMENT - DUCT TEST
G36015        PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A
G36016        PLUG EQUIPMENT - DUCT TEST, 14A312 FLANGED DUCT
G36017        PLUG EQPT - PRESSURE TEST
G36018        WRENCH SET - FAN AIR TEMPERATURE SENSOR
G36019        PLUG - DUCT PRESSURE TEST (DUCTS WITH 65B94822
G36020        PLUG EQUIPMENT - DUCT TEST (20 MACHINED
G36021        PLUG EQUIPMENT - DUCT TEST (65B90154 FLANGE)
G36022        PLUG EQUIPMENT - DUCT PRESSURE TEST (65B94541
G36023        PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST
G36024        PLUG EQPT - PNEUMATIC DUCT TEST
G36025        PLUG EQPT - PNEUMATIC DUCT TEST
G36026        PLUG EQPT - PNEUMATIC DUCT, HYDROSTATIC TEST
G36027        PLUG EQUIPMENT - BOSS, SENSOR MOUNTING
G36028        PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST
G36029        PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST
G36030        PLUG - PNEUMATIC DUCT, HYDROSTATIC TEST
G36031        PRESSURE TEST EQPT - DUCT ASSY
G36032        PRESSURE TEST EQPT - DUCT ASSY
G36033-1      PRESSURE TEST EQPT - DUCT ASSY
G36034        PRESSURE TEST EQPT - DUCT ASSY
G36035−2      SUPERSEDED BY G36035−36
G36035-1      TEST EQPT - PNEUMATIC SYSTEM HEALTH CHECK
G36035-36     TEST EQPT - PNEUMATIC SYSTEM HEALTH CHECK
G36037        PLUG EQPT - DUCT, PROOF PRESSURE TEST
G36038        PLUG EQPT - DUCT, PROOF PRESSURE TEST
G36040        PLUG EQPT - DUCT, PROOF PRESSURE TEST
G36041        PLUG - DUCT, PROOF PRESSURE TEST
G36042        PLUG EQPT - DUCT, PROOF PRESSURE TEST
G38001        TEST BOX- POTABLE WATER MODULE/PC ASSY
G38002        PLUG EQUIPMENT - DUAL PORTED WASTE WATER DRAIN
G38003        COVER - PROTECTIVE, DRAIN MAST
G38004−1      SUPERSEDED BY G38004−6
G38004−10     REPLACED BY G38004−13
G38004−6      SUPERSEDED BY G38004−10
G38004-13     BLOCKAGE REMOVAL TOOL - VACUUM LAV SYSTEM
G38005−1      REPLACED BY G38005−111
G38005−4      SUPERSEDED BY G38005−137
G38005-111    TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-114    TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-115    TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-137    TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-2      TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-3      TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-60     TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-61     TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38005-87     TEST CHAMBER EQPT - LAVATORY SERVICE PANEL
G38006-1      BLOCKAGE REMOVAL EQPT - VACUUM WASTE SYSTEM
G38007        REM/INSTL EQPT - POTABLE WATER TANK
G47001        TEST EQUIPMENT - LEAK AND PRESSURE, NGS
G49002        CRADLE/DOLLY - UNIVERSAL APU
G49004        DOLLY EQUIPMENT - AUXILIARY POWER UNIT
G49005        SLING EQPT. - A.P.U.
G49006        DISPATCH EQUIPMENT - APU REMOVED
G49007−1      REPLACED BY G49007−5
G49007-5      THREAD PROTECTOR EQPT - APU RETENTION BOLTS
G51001        MEASUREMENT EQPT - CHECK, SKIN SMOOTHNESS
G51002        REPLACED BY G51003
G51002−1      REPLACED BY G51003
G51002-1      FALL PROTECTION - OVERHEAD PERSONNEL SUPPORT
G51003-1      FALL PROTECTION - OVERHEAD PERSONNEL SUPPORT
G52001        SPLINE WRENCH - UPPER DECK DOOR, TYPE "A"
G52003        SAFETY STRUT - SIDE CARGO DOOR
G52004        FUNCTIONAL TEST EQUIPMENT - MANUAL DRIVE
G52005        WRENCH - AIRSTAIR HINGE ASSY NUT
G52006        ASSY/DISASSY EQPT - AIRSTAIR BRAKE
G52007        WRENCH - SPANNER, AIRSTAIR DAMPER NUT
G52008        TEST FIXTURE - SIDE CARGO DOOR SAFETY STRUT
G52009        TEST ADAPTER-ACTUATOR ACCESS DOOR LATCH
G52010        SLING EQPT - AIRSTAIR HANDLING
G52011        GUIDE EQPT - CARRIER BEARING ASSY
G52012        SLING - INSTL/REMOVAL, AIRSTAIR DOOR
G52013        WRENCH, HANDRAIL PIN
G52014        ADJUSTMENT TOOL - RADIUS ROD, AIRSTAIR
G52015        TEST EQPT - ACTUATOR, ACCESS DOOR LATCH
G52016        SLING - TYPE "A" DOOR REMOVAL/INST
G52017        ESCAPE SLIDE SIMULATION
G52018        DRILL JIG EQPT - DOOR LATCH TORQUE TUBES
G52019        OVERCENTER GAUGE - ESCAPE SLIDE ARM DISARM
                                                                www.sinters.ca
PART NUMBER                         DESCRIPTION
G52020        ALIGNMENT GAUGE - ARM/DISARM MECH, ESCAPE SLIDE
G52021        GAGE - MAIN DOOR LATCH
G52022        GAGE EQPT - MAIN DOOR LATCH
G52023        SAFETY BARRIER ASSY - TYPE "A" DOOR
G52024        TEST EQUIPMENT- NOSE CARGO DOOR LATCHING SYSTEM
G52025        ALIGNMENT EQUIPMENT - LATCH FITTINGS
G52026        RIGGING EQPT - OVER ROTATE INDICATION SWITCHES,
G52027        ALIGNMENT EQUIPMENT - PULL IN HOOKS
G52028        RIGGING EQPT - POSITION RESOLVER, SWINGZONE
G52029        PERSONNEL SAFETY BARRIER - SWING ZONE DOOR
G52030        PIN - MAINTENANCE, SWING ZONE DOOR, MAIN HINGE
G53001        SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS
G54002        SLING - ENGINE STRUT
G54003        GAGE - DIAGONAL BRACE, NACELLE STRUT
G54004        SLING - STRUT REMOVAL/INSTL
G54006        KIT - FUSE PIN REMOVAL, GE ENGINE
G54006−35     SUPERSEDED BY A54001−102
G54007−1      SUPERSEDED BY G54007−76
G54007−2      REPLACED BY G54007−80
G54007−2      REPLACED BY G54007−81
G54007−3      SUPERSEDED BY G54007−77
G54007−4      SUPERSEDED BY G54007−78
G54007−5      SUPERSEDED BY G54007−79
G54007−76     REPLACED BY G54007−80
G54007−76     REPLACED BY G54007−88
G54007−78     REPLACED BY G54007−80
G54007−78     REPLACED BY G54007−93
G54007−78     REPLACED BY G65007−90
G54007−79     REPLACED BY G54007−80
G54007−79     REPLACED BY G54007−89
G54007-165    STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-81     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-82     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-88     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-89     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-90     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-91     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-92     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54007-93     STRUT SLING - PRELOAD/UNLOAD, DIAGONAL BRACE
G54008        REMOVAL/INSTL KIT - FUSE PIN
G54009−1      SUPERSEDED BY G54009−27
G54014        ADAPTER - PIVOT BOLT, SPRING BEAM
G57001        SAFETY LANYARD EQUIP - HORIZ STAB UPPER SURFACE
G57002        SLING EQUIPMENT - WINGLET
G57003        TURNBUCKLE - WING TE RIB INSTL
G57004        INSTL/REMOVAL TOOL - WINGLET AFT MOUNT BOLTS
G57005        BORING EQPT- GIMBAL SPRT, INBD CARRIAGE, INBD
G57006        RIGGING BEAM - FIXED TRILING EDGE, UPPER PANEL
G71001        BOOTSTRAP EQPT - CF6-80C2B ENGINE
G71002−1      SUPERSEDED BY G71002−31
G71002−45     SUPERSEDED BY G71002−48
G71002-48     CRADLE - CF6-80C2B ENGINE
G71003        BOOTSTRAP EQUIPMENT - PW4000 ENGINES
G71006        SLING - ENGINE SUPPORT EQPT. CF6-50
G71007−1      SUPERSEDED BY G71007−16
G71007−16     SUPERSEDED BY G71007−28
G71007-28     SLING EQPT - INLET COWL, CF6-80C2B ENGINE
G71008−148    REPLACED BY G71009−164
G71008−57     REPLACED BY G71008−163
G71008-1      PROOF LOAD EQPT - CRADLE, CF6-80C2B ENGINE
G71009−1      REPLACED BY G71009−22
G71009−148    SUPERSEDED BY G71009−164
G71009−163    SUPERSEDED BY G71009−169
G71009−167    REPLACED BY G71009−207
G71009−22     REPLACED BY G71009−167 & G71009−56
G71009−52     SUPERSEDED BY G71009−167
G71009−57     SUPERSEDED BY G71009−169
G71009−59     SUPERSEDED BY G71009−168
G71009-056    FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT
G71009-058    FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT
G71009-164    FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT
G71009-168    FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT
G71009-169    FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT
G71009-207    FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT
G71010−1      SUPERSEDED BY G71010−60
G71010−2      SUPERSEDED BY G71010−61
G71010−3      SUPERSEDED BY G71010−62
G71010−60     SUPERSEDED BY G71010−67
G71010−61     SUPERSEDED BY G71010−68
G71010−62     SUPERSEDED BY G71010−69
                                                                www.sinters.ca
PART NUMBER                          DESCRIPTION
G71010-80     SLING ENGINE HANDLING - G.E. ENGINES
G71010-81     SLING ENGINE HANDLING - G.E. ENGINES
G71010-82     SLING ENGINE HANDLING - G.E. ENGINES
G71012−1      SUPERSEDED BY G71012−116
G71012−2      SUPERSEDED BY G71012−117
G71012−3      SUPERSEDED BY G71012−118
G71012−4      SUPERSEDED BY G71012−119
G71012-107    LOCATING JIG - EBU TO STRUT, CF6-80C2B ENGINE
G71012-116    LOCATING JIG - EBU TO STRUT, CF6-80C2B ENGINE
G71012-117    LOCATING JIG - EBU TO STRUT, CF6-80C2B ENGINE
G71012-118    LOCATING JIG - EBU TO STRUT, CF6-80C2B ENGINE
G71012-119    LOCATING JIG - EBU TO STRUT, CF6-80C2B ENGINE
G71013-1      SLING - FAN COWL, CF6-80C2B ENGINE
G71014-1      BEAM - ENGINE HANDLING, RB211-524
G71015−1      SUPERSEDED BY G71015−75
G71015-75     CRADLE - RB211-524 (G & H) ENGINE
G71016        CANCELLED
G71017-1      PROOFLOAD FIXTURE - RB211-524 ENGINE
G71018-1      SUPPORT EQPT - RB211-524 ENGINE, H2 HANDLING
G71019        HOIST EQUIPMENT - BOOTSTRAP, RB211-524 ENGINE
G71020-1      WRENCH - FLEX NUT, 15TH STAGE, MANIFOLD AND
G71021−1      SUPERSEDED BY G71021−16
G71021−11     SUPERSEDED BY G71021−16
G71021−6      SUPERSEDED BY G71021−16
G71021-16     DRIVE EXTENSION - STARTER VALVE AND PRSOV
G71022−1      SUPERSEDED BY G71022−44
G71022-44     HOLD OPEN EQPT - ENGINE FAN/CORE COWL, CF-80C2B
G71023−1      SUPERSEDED BY G71023−52
G71023-52     HOLD OPEN EQPT - 20 KNOTS PW4000 FAN & CORE
G71024        ADAPTER EQUIPMENT - FAN THRUST REVERSER
G71025        SLING EQPT - RB211-524 ENGINE
G71027        SLING EQPT - JT9D, PW4000 AND CF6-50 ENGINES
G71028        BOOSTSTRAP EQPT - CF6-50 ENGINE
G71029        BOOTSTRAP EQUIPMENT - RB211 ENGINE
G71030-1      SLING EQPT - NOSE COWL, RB211-524 & CF6-50
G71031        BOOTSTRAP EQPT - JT9D-3 & -7 ENGINES
G71032        REPLACED BY G71030
G71032−1      SUPERSEDES 20HME65B94200−1
G71032-1      SLING EQPT - INLET COWL, CF6-50 & RB211-524
G71033        SLING EQPT - RB211
G71035        KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT
G71036        RIGGING EQPT - LINEAR POSITION TRANSDUCER
G71041        ENGINE INSTALLATION TOOL KIT (JT9D)
G76001        PIN SET - RIGGING, ENGINE CONTROLS, CF6-80C2
G76002−7      SUPERSEDED BY G76002−15
G76002-15     PROTRACTOR - THRUST REVERSER LEVERS, FWD & REV
G76003        TEST FIXTURE - CONTROL STAND MICRO SWITCH PACK
G76004        JIG ASSEMBLY - MICROSWITCH, CONTROL STAND
G76005        ASSEMBLY JIG - MICROSWITCH ASSY, THROTTLE
G76006        MICROSWITCH ASSEMBLY JIG, THROTTLE CONTROL
G77001        TEST BOX - LOW N1 TEST
G77002        ADAPTER - PT2 PROBE, EPR SYSTEM LEAK TEST
G78002-1      HOLD OPEN SET - THRUST REVERSER COWL, CF6-80C2
G78003−1      SUPERSEDED BY G78003−53
G78003-53     SLING EQPT - FAN REVERSER, CF6-80C2B ENGINE
G78004        INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE
G78005−1      SUPERSEDED BY G78005−10
G78005-10     ADAPTER - THRUST REVERSER HOLD OPEN ROD
G78006−1      SUPERSEDED BY G78006−74
G78006−2      SUPERSEDED BY G78006−75
G78006-74     DOLLY - THRUST REVERSER, CF6-80C2 ENGINE
G78006-75     DOLLY - THRUST REVERSER, CF6-80C2 ENGINE
J07001−1      SUPERSEDED BY J07001−9
J07001−13     SUPERSEDED BY J07001−23
J07001−23     REPLACED BY J07001−25
J07001−9      SUPERSEDED BY J07001−13
J07001-25     JACK FITTING - FORWARD BODY
J07002-1      JACK FITTING - INNER WING
J07003-1      JACK FITTING - OUTER WING
J07004−1      SUPERSEDED BY J07004−13
J07004−13     SUPERSEDED BY J07004−15
J07004−15     SUPERSEDED BY J07004−23
J07004−23     REPLACED BY J07004−25
J07004−23     REPLACED BY J07004−59
J07004−25     SUPERSEDED BY J07004−59
J07004-59     EMERGENCY JACKING EQPT - NOSE LANDING GEAR
J07005        REPLACED BY J07009
J07005−1      SUPERSEDED BY J07005−33
J07005−33     SUPERSEDED BY J07005−52
J07005-52     JACKING EQPT-MLG (EMERGENCY CONDITION)
                                                                www.sinters.ca
PART NUMBER                           DESCRIPTION
J07008−1       REPLACED BY J07008−22
J07008-30      SLING EQPT - TETHERING/LIFTING AIRPLANE
J07009         SUPERSEDED BY J07013
J07010-1       HOIST EQPT - AIRPLANE RECOVERY, WITH MLG
J07012−1       SUPERSEDED BY J07012−26
J07012-26      PROOF LOAD EQPT - HOIST EQPT, AIRPLANE RECOVERY
J07013-1       JACKING EQPT- MLG AXLE (EMERGENCY CONDITION)
J07014-1       PROOF LOAD EQPT - AXLE JACKING EQPT
J09001-*       DATA SHEET - TOWBAR DESIGN SPECIFICATIONS
J10001-01      PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST
J10001-02      PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST
J10001-13      PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST
J10001-14      PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST
J10001-25      PLUG SET - VENT, THERMAL ANTI-ICING EXHAUST
J10003-8       TETHERING EQPT - ENGINE PYLON, AIRPLANE
J10005-1       PLUG - VENT, DUCT
J10006         PROTECTIVE EQUIPMENT, GE90-115B ENGINE
J12001−1       SUPERSEDED BY J12001−20
J12001−2       SUPERSEDED BY J12001−21
J12001−21      REPLACED BY TYPE 1A/MODEL 22 LADDER
J12001-20      LADDERS - ACCESS DOORS 112AL AND 117AL
J12001-21      LADDERS - ACCESS DOORS 112AL AND 117AL
J12003-*       SPECIFICATION - PLATFORM ACCESS-MLG WHEEL WELL
J12005−1       REPLACED BY 1107WSCHSK
J12005-1       ACCESS STAND - CABIN CROWN
J12007-1       ADAPTER - NLG STRUT SERVICING
J20001-1       HOIST EQUIPMENT - LRU’S MAIN EE BAY
J20002−1       REPLACED BY J20002−36
J20002-36      LOAD POSITIONER - ENGINE ACCESSORIES, 250 LB
J20003−1       SUPERSEDED BY J20003−34
J20003-34      PIN SET - RIGGING
J20004-1       PERSONNEL EQUIP - SHOCK ABSORBING LNYD, HORIZ.
J20005-1       PERSONNEL EQPT - SHOCK ABSORBING LNYD, UPPER WING
J20006-1       PERSONNEL EQPT - SHOCK ABSORBING LNYD, ENG/STRUT
J20006-2       PERSONNEL EQPT - SHOCK ABSORBING LNYD, ENG/STRUT
J20006-3       PERSONNEL EQPT - SHOCK ABSORBING LNYD, ENG/STRUT
J20007-*       SPECIFICATION - MULTI-PURPOSE AIR POWERED HOIST
J20009         REPLACED BY J49005
J20009−1       SUPERSEDED BY J20009−38
J20009−2       SUPERSEDED BY J20009−64
J20009−38      REPLACED BY J20009−78
J20009−64      REPLACED BY J20009−68
J20009−78      REPLACED BY J20009−38
J20009-38(?)   JACKING EQPT - HYDRAULIC TELESCOPING
J20009-50      JACKING EQPT - HYDRAULIC TELESCOPING
J20009-68      JACKING EQPT - HYDRAULIC TELESCOPING
J20009-70      JACKING EQPT - HYDRAULIC TELESCOPING
J20009-78      JACKING EQPT - HYDRAULIC TELESCOPING
J20009-88      JACKING EQPT - HYDRAULIC TELESCOPING
J21001−1       SUPERSEDED BY J21001−72
J21001−2       SUPERSEDED BY J21001−73
J21001−3       REPLACED BY J21001−81
J21001−72      REPLACED BY J21001−79
J21001−73      REPLACED BY J21001−80
J21001-79      HOIST ADAPTER EQPT - AIR CONDITIONER PACK
J21001-80      HOIST ADAPTER EQPT - AIR CONDITIONER PACK
J21001-81      HOIST ADAPTER EQPT - AIR CONDITIONER PACK
J21002-1       PROOF LOAD EQPT - HOIST ADAPTER EQPT, A/C PACK
J21003-1       MAINTENANCE PLATFORM EQPT
J21003-2       MAINTENANCE PLATFORM EQPT
J21006-1       LOCK - HOLD OPEN, OUTFLOW VALVE
J21007-1       ADAPTER EQPT - ADJUSTABLE ANGLE, BOOM HOIST
J21008−1       SUPERSEDED BY J21008−7
J21008-7       DISPATCH EQPT - COVER PLATE, RAM AIR INLET
J22001-1       TOOL SET - AUTOTHROTTLE SERVO ASSY
J22001-8       TOOL SET - AUTOTHROTTLE SERVO ASSY
J22002-1       SPLINE WRENCH - GRBX AUTOTHROTTLE CONTROL STAND
J22003-1       RIGGING EQPT - AUTOTHROTTLE AND RUDDER BRAKE
J22004−1       REPLACED BY J22004−54
J22004−1       SUPERSEDED BY J22004−67
J22004−2       REPLACED BY J22004−55
J22004−2       SUPERSEDED BY J22004−68
J22004−54      SUPERSEDED BY J22004−67
J22004−55      SUPERSEDED BY J22004−68
J22004-67      TEST EQPT - AUTOTHROTTLE, GEARBOX, BRAKE
J22004-68      TEST EQPT - AUTOTHROTTLE, GEARBOX, BRAKE
J23001−1       REPLACED BY J23001−12
J23001-12      HOIST ADAPTER - SATCOM TOP-MOUNTED HIGH GAIN
J23002−1       REPLACED BY J23002−16
J23002-16      ADAPTER EQPT - HOIST, CROWN ZONE
                                                                   www.sinters.ca
PART NUMBER                           DESCRIPTION
J24001−1      SUPERSEDED BY J24001−43
J24001−43     REPLACED BY J24001−50
J24001-50     HOIST ADAPTER - VSCF (PW/GE/RR ENGINES)
J24002−1      SUPERSEDED BY J24002−45
J24002−45     SUPERSEDED BY J24002−56
J24002−73     REPLACED BY A24011−1
J24002-73     HOIST ADAPTER - IDG (PW/GE/RR ENGINES)
J24004−56     SUPERSEDED BY J24004−73
J24005-1      HOIST EQPT - APU BATTERY
J24011-11     DISPATCH KIT - VSCF GENERATOR
J24012-1      DISPATCH KIT - VSCF GENERATOR, PW ENGINE
J24014−1      REPLACED BY J24014−24
J24014-24     GFCI TESTER - HYDRAULIC, JETTISON AND OVERRRIDE
J24015-1      PRESSURE TEST EQPT - ENGINE GENERATORS
J24015-2      PRESSURE TEST EQPT - ENGINE GENERATORS
J24015-3      PRESSURE TEST EQPT - ENGINE GENERATORS
J25001−1      SUPERSEDED BY J25001−5
J25001-5      LEVER - STOWAGE BIN RELEASE
J25002        CANCELLED
J25003        CANCELLED
J25004        CANCELLED
J25004−1      SUPERSEDED BY J25004−23
J25005-1      INSTALL/REMOVAL EQPT - INFLATION BOTTLE,
J25006-1      INSTL/REMOVAL EQPT - OFF WING ESCAPE SLIDE
J25007-1      HOIST ASSY - PASSENGER SEAT
J25007-2      HOIST ASSY - PASSENGER SEAT
J25008-1      CART, PASSENGER SEAT
J25009-1      AIR FLOW REGULATOR - PNEUMATIC PRESSURE TEST,
J25010-1      DOLLY EQPT- OFAR/OFCR MODULE RMVL/INSTL
J25011-1      ADAPTER EQPT EQPT - OFAR/OFCR MODULE,
J25013−1      REPLACED BY J25013−46
J25013-46     HOISTING EQPT - UPPER VESTIBULE MODULE
J25013-47     HOISTING EQPT - UPPER VESTIBULE MODULE
J25014-1      BLANKING PLATE - FCT PDU, MAIN DECK
J26001        CANCELLED
J26002-1      EXTENDER CARD - E/E EQUIPMENT
J26002-2      EXTENDER CARD - E/E EQUIPMENT
J26002-3      EXTENDER CARD - E/E EQUIPMENT
J26003−1      SUPERSEDED BY J26003−12
J26003-12     TEST BOX - TIME DELAY, CARGO FIRE EXTINGUISHING
J26004−2      SUPERSEDED BY J26004−24
J26004−3      SUPERSEDED BY J26004−25
J26004−4      SUPERSEDED BY J26004−26
J26004−43     SUPERSEDED BY J26004−49
J26004−5      SUPERSEDED BY J26004−27
J26004-24     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-25     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-26     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-27     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-28     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-49     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-53     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26004-54     TEST EQPT - SQUIB FIRE EXTINGUISHING SYSTEM
J26005        REPLACED BY J26009
J26005−1      REPLACED BY J26005−19
J26005−19     REPLACED BY J26005−24
J26005−24     REPLACED BY J26005−32
J26005-32     TEST EQUIPMENT - FIRE EXT TUBING, CARGO
J26006-1      CONTROLLER - POWER SUPPLY, E/E COOLING FANS
J26007-1      TEST BOX, - CARGO SMOKE HEATER, TEST PLUG
J26008−2      REPLACED BY J26008−35
J26008-01     TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
J26008-03     TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
J26008-35     TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
J26009-1      TEST EQUIPMENT - FIRE EXTINGUISHING TUBING,
J27001-1      CLAMP ASSY - RUDDER TAB
J27002-1      LOCK, - HORIZONTAL STABILIZER ACTUATOR BALL NUT
J27003-1      DRIVE ADAPTER - TORQUE TUBE COUPLING, L.E. SLAT
J27004-1      REMOVAL/INSTL EQUIPMENT - SLAT POWER DRIVE UNIT
J27005−1      SUPERSEDED BY J27005−22
J27005−22     SUPERSEDED BY J27005−28
J27005−28     SUPERSEDED BY J27005−33
J27005−33     REPLACED BY J27005−48
J27005-48     LOCK EQPT - INBD/OUTBD, SPOILER ACTUATOR
J27006−1      SUPERSEDED BY J27006−14
J27006−14     SUPERSEDED BY J27006−18
J27006−18     SUPERSEDED BY J27006−20
J27006-20     SLING EQPT - OUTBOARD T.E. FLAP
J27007−1      SUPERSEDED BY J27007−7
J27007-7      HOIST EQPT - HORIZ STABILIAER, TRIM ACTUATOR
                                                                www.sinters.ca
PART NUMBER                           DESCRIPTION
J27008-1      SLING - REMOVAL/INSTL, AILERON
J27009-1      DOLLY - HORIZ. STABILIZER TRIM ACTUATOR
J27010−1      SUPERSEDED BY J27010−11
J27010−11     SUPERSEDED BY J27010−16
J27010−16     SUPERSEDED BY J27010−21
J27010−21     SUPERSEDED BY J27010−34
J27010−34     REPLACED BY J27010−44
J27010-44     ADAPTER - CONTROL WHEEL
J27011−1      SUPERSEDED BY J27011−20
J27011-20     SLING EQPT - INBD T.E. FLAP
J27012-1      SLING - REMOVAL/INSTALLATION, FLAPERON
J27013−1      SUPERSEDED BY J27013−18
J27013−18     SUPERSEDED BY J27013−20
J27013-20     SLING EQPT - ELEVATOR REMOVAL/ INSTALLATION
J27014−1      SUPERSEDED BY J27014−19
J27014-19     SLING EQPT - SLAT, INBD & OUTBD, REM/INSTL
J27015-1      SPLINE ADAPTER - LE/TE POWER DRIVE UNIT, MANUAL DRIVE
J27016−1      SUPERSEDED BY J27016−46
J27016-46     REM/INSTL EQPT - ELEVATOR POWER CONTROL UNIT (PCU)
J27017−1      REPLACED BY J27017−19
J27017-19     RIGGING EQPT - FLAPERON
J27019-1      PIN SET - BYPASS, ELEVATOR PCU
J27020-1      RIGGING EQPT - OUTBD TRAILING EDGE FLAPS
J27021-1      DRIVE ADAPTER - TORQUE TUBE COUPLING, T.E. FLAP
J27022-1      ADAPTER - TORQUE SLAT PINION
J27023−1      REPLACED BY J27023−26
J27023−1      SUPERSEDED BY J27023−33
J27023−26     SUPERSEDED BY J27023−33
J27023-33     REM/INSTL EQPT - TRANSMISSION, T.E. FLAP
J27024−1      SUPERSEDED BY J27024−47
J27024−2      SUPERSEDED BY J27024−48
J27024−38     SUPERSEDED BY J27024−47
J27024−39     SUPERSEDED BY J27024−48
J27024-47     SLING EQPT - RUDDER, REMOVAL/INSTL
J27024-48     SLING EQPT - RUDDER, REMOVAL/INSTL
J27025-1      SLING - REM/INSTL, RUDDER TAB
J27026−1      SUPERSEDED BY J27026−32
J27026−32     SUPERSEDED BY J27026−40
J27026−40     SUPERSEDED BY J27026−49
J27026−41     SUPERSEDED BY J27026−50
J27026-49     RESTRAINT EQPT - INBD FLAP, AFT TO MAIN SEGMENT
J27026-50     RESTRAINT EQPT - INBD FLAP, AFT TO MAIN SEGMENT
J27027-1      HOIST EQPT - REM/INSTL, RUDDER PCU
J27027-52     HOIST EQPT - REM/INSTL, RUDDER PCU
J27028−1      SUPERSEDED BY J27028−14
J27028-14     LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT
J27028-20     LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT
J27028-21     LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT
J27028-31     LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT
J27030−1      REPLACED BY J27030−29
J27030-29     RIGGING EQPT - L.E. SLAT INSTALLATION
J27033-1      LOCK - OUTBOARD AILERON POWER CONTROL UNIT
J27034−1      SUPERSEDED BY J27034−13
J27034-13     GAP GAGE - SPOILER TO FLAP CLEARANCE
J27035−1      REPLACED BY J27035−57
J27035−40     REPLACED BY J27035−58
J27035−55     REPLACED BY J27035−59
J27035-41     LOCK EQPT - FLAP WITH TRANSMISSIONS REMOVED
J27035-52     LOCK EQPT - FLAP WITH TRANSMISSIONS REMOVED
J27035-57     LOCK EQPT - FLAP WITH TRANSMISSIONS REMOVED
J27035-58     LOCK EQPT - FLAP WITH TRANSMISSIONS REMOVED
J27035-59     LOCK EQPT - FLAP WITH TRANSMISSIONS REMOVED
J27037-1      ELECTRICAL COVERS - LE SLATS, TE FLAPS,
J27038−1      SUPERSEDED BY J27038−11
J27038−11     REPLACED BY J27038−16
J27038-16     GAUGE ASSY - FLAP SKEW SENSOR
J27043−1      SUPERSEDED BY J27043−14
J27043-18     CLAMP EQPT - DRIVE SHAFT, T.E. FLAP
J27045-1      SUPPORT EQUIPMENT - FLAPERON
J27046-1      CLAMP EQPT - L.E. SLAT DRIVE SHAFT
J27047-1      DRIVE BOLT - FLAP ATTACH BOLT INSTL
J27048−1      SUPERSEDED BY J27048−14
J27048-14     REM/INSTL EQPT - NO.3 & NO.6 FLAP FAIRING
J27049-1      WRENCH - COUPLING SLEEVE, LEADING EDGE
J27050-1      WRENCH - COUPLING SLEEVE, FLAP ACTUATION
J27051-1      WRENCH - WING TE FLAP SUPPORT NUT
J27052-1      ADAPTER - SIDE GUST SUPPRESSION LEAK TEST
J27053−1      REPLACED BY J27053−30
J27053-30     TEST EQPT - L.E. ROTARY ACTUATORS
J27054-1      TEST EQUIPMENT - LEAKAGE TEST
                                                                      www.sinters.ca
PART NUMBER                            DESCRIPTION
J27055−1       REPLACED BY J27055−17
J27055-17      AXIAL LOAD EQPT - FLAP ACTUATION TORQUE BRAKE
J27056−1       REPLACED BY J27056−38
J27056−1       SUPERSEDED BY J27056−43
J27056−2       REPLACED BY J27056−39
J27056−2       SUPERSEDED BY J27056−44
J27056−38      SUPERSEDED BY J27056−43
J27056−39      SUPERSEDED BY J27056−44
J27056−43      REPLACED BY J27056−45
J27056−44      REPLACED BY J27056−46
J27056-45      TEST EQPT - RUN-IN, VARIABLE DRIVE
J27056-46      TEST EQPT - RUN-IN, VARIABLE DRIVE
J27057−1       REPLACED BY J27057−10,−11,−12
J27057−10      SUPERSEDED BY J27057−22
J27057−12      SUPERSEDED BY J27057−22
J27057−13      SUPERSEDED BY J27057−22
J27057−14      SUPERSEDED BY J27057−22
J27057-21      MEASUREMENT EQPT - BEARING WIDTH
J27057-22      MEASUREMENT EQPT - BEARING WIDTH
J27058-1       TOOL SET - SEAL INSTALLATION
J27059−1       SUPERSEDED BY J27059−38
J27059-38      CHECK FIXTURE EQPT - BACKLASH, LE AND TE ANGLE GEARBOX
J27060-1       TEST EQPT - SLAT & OFFSET GEARBOX
J27061-1       OVERHAUL EQPT - STAB TRIM ACTUATOR
J27062-1       OVERHAUL EQPT - SPRING STACK, FLAP ACTUATION
J27063−1       REPLACED BY J27063−38
J27063−1       SUPERSEDED BY J27063−44
J27063−38      SUPERSEDED BY J27063−44
J27063-44      TEST EQPT - TORQUE BRAKE
J27064-1       TEST EQPT - FWD QUADRANT ASSY, PITCH TRIM
J27065-1       TEST EQPT - POWER DRIVE UNIT, FLAP
J27066         CANCELLED, USE A27072.
J27066-1       ADAPTER EQPT - TEST FIXTURE, STAB TRIM ACTUATOR
J27067−1       SUPERSEDED BY J27067−108
J27067-108     ASSY/DISASSY EQPT - FLAP ACTUATION
J27068−1       SUPERSEDED BY J27068−83
J27068-83      TEST EQPT - T.E. FLAP ACTUATION TRANSMISSIONS
J27069-1       BACKLASH CHK EQT - OFFSET GEARBOX, LE SLAT ACTUATION
J27070-1       FIXTURE EQUIPMENT - ASSEMBLY, STAB TRIM ACTUATOR
J27071-1       OVERHAUL EQPT - FREE PLAY CHECK, STABILIZER
J27072-1       ADAPTER - TEST, SARD SYSTEM
J27073-1       TEST EQPT - ELEVATOR FEEL UNIT, LATERAL &
J27074-1       SPANNER WRENCH - TORQUE TUBE, INBOARD MAIN FLAP
J27075−1       SUPERSEDED BY J27075−32
J27075-32      ASSEMBLY/DISASSEMBLY EQPT- SLAT SKEW/LOSS
J27076−1       REPLACED BY J27076−10
J27076−5       REPLACED BY J27076−11
J27076-10      TEST ASSY - PRESSURE SWITCH, NOSE GEAR
J27076-11      TEST ASSY - PRESSURE SWITCH, NOSE GEAR
J27078-1       DRIVE ADAPTER EQPT - ACTUATOR, HORIZONTAL STAB
J27079−1       SUPERSEDED BY J27079−31
J27079−31      REPLACED BY J27079−32
J27079-31      INSPECTION EQUIPMENT - ELEVATOR FREEPLAY
J27079-32(?)   INSPECTION EQUIPMENT - ELEVATOR FREEPLAY
J27080-1       HOLDING FIXTURE- TE FLAP, ANGLE GEARBOX
J27081-1       RIGGING EQPT - OUTBD TRAILING EDGE FLAPS
J28001         SUPERSEDED BY A28002 FOR 767 USAGE
J28001         SUPERSEDED BY J28013
J28001-1       DRAIN FITTING - FUEL SYSTEM
J28002-1       DEFUELING FITTING - MAIN AND OVERRIDE PUMP
J28005         REPLACED BY G28018
J28005−3       SUPERSEDED BY J28005−30
J28005-1       TEST EQPT - ENGINE FUEL FEED MANIFOLD
J28005-2       TEST EQPT - ENGINE FUEL FEED MANIFOLD
J28005-30      TEST EQPT - ENGINE FUEL FEED MANIFOLD
J28006-1       SEALING TOOL - RIVET, FUEL TANK
J28007−1       REPLACED BY J28007−9 & −10
J28007-09      PRESSURIZATION EQPT - WING DRY BAY, FUEL LEAK DETECTION
J28007-10      PRESSURIZATION EQPT - WING DRY BAY, FUEL LEAK DETECTION
J28007-11      PRESSURIZATION EQPT - WING DRY BAY, FUEL LEAK DETECTION
J28008-1       BLANKING EQUIPMENT - INHIBIT, FUEL SYSTEM
J28010−1       SUPERSEDED BY J28010−26
J28010-26      CONSOLE - SHOP AIR SUPPLY
J28011-1       AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-10      AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-11      AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-4       AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-5       AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-6       AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-7       AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
                                                                         www.sinters.ca
PART NUMBER                          DESCRIPTION
J28011-8      AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28011-9      AUXILIARY DEFUELING EQPT - EXTERNAL PWR CTL UNIT
J28012-1      DRAIN HOSE - SUMP VALVE, CENTER AUXILIARY FUEL
J28013-1      FITTING EQPT - FUEL DRAIN SUMP
J28014-1      PALLET EQPT - AUXILIARY FUEL TANK INSTL
J28015-1      TEST EQPT - LEAK & PRES, AUX-FUEL-TANK FUEL LINE SHROUD
J29001        CANCELLED
J29001−1      SUPERSEDED BY J29001−23
J29002-1      REM/INSTL EQPT - RAM AIR TURBINE
J29003−1      SUPERSEDED BY J29003−66
J29003−66     SUPERSEDED BY J29003−72
J29003-72     HOIST ADAPTER - ADU REMOVAL/INSTL
J29004-1      EXTENSION EQPT - GND SERVICE DISCONNECT, L/R
J29005-1      PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR
J29005-30     PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR
J32001−1      SUPERSEDED BY J32001−31
J32001−31     SUPERSEDED BY J32001−39
J32001−39     SUPERSEDED BY J32001−43
J32001−43     REPLACED BY J32001−46
J32001−43     SUPERSEDED BY J32001−63
J32001−46     SUPERSEDED BY J32001−64
J32001−63     REPLACED BY J32001−64
J32001-64     MEASURING EQPT - BRAKE PEDAL
J32002−1      SUPERSEDED BY J32002−40
J32002−40     SUPERSEDED BY J32002−60
J32002-60     SLING EQPT - DRAG AND SIDE STRUT REM/INSTL, MLG
J32002-61     SLING EQPT - DRAG AND SIDE STRUT REM/INSTL, MLG
J32002-73     SLING EQPT - DRAG AND SIDE STRUT REM/INSTL, MLG
J32004−1      REPLACED BY J32004−21
J32004-21     PULLER EQPT - TRUNNION PIN, NLG
J32004-22     PULLER EQPT - TRUNNION PIN, NLG
J32004-23     PULLER EQPT - TRUNNION PIN, NLG
J32005−1      REPLACED BY J32005−19
J32005-19     PULLER EQPT - TRUNNION PIN, NLG UPPER DRAG STRUT
J32006        CANCELLED
J32006-1      GAUGE - ADJUSTMENT, NLG DOWNLOCK LINK
J32007-1      PROTECTOR EQPT - AXLE & THREAD, NLG
J32008−1      SUPERSEDED BY J32008−31
J32008-31     PULLER EQPT - BRAKE SYSTEM PINS, MAIN LANDING
J32008-54     PULLER EQPT - BRAKE SYSTEM PINS, MAIN LANDING
J32009−29     REPLACED BY J32009−45
J32009-45     REPLACEMENT EQPT - NLG LOWER SEALS
J32010−1      SUPERSEDED BY J32010−48
J32010−58     REPLACED BY J32010−62
J32010-62     PULLER EQPT - WHEEL & BRAKE SLEEVES, MLG AXLES
J32011−1      SUPERSEDED BY J32011−3
J32011−2      SUPERSEDED BY J32011−4
J32011−4      REPLACED BY J32011−7
J32011-3      DOWNLOCK EQPT - NLG & MLG
J32011-7      DOWNLOCK EQPT - NLG & MLG
J32012−1      SUPERSEDED BY J32012−18
J32012-18     PULLER EQPT - BRAKE, MAIN LANDING GEAR
J32013-1      SIDE STRUT ADJUSTMENT EQPT - DRAG STRUT LOCK
J32014−1      SUPERSEDED BY J32014−19
J32014−19     SUPERSEDED BY J32014−26
J32014−26     SUPERSEDED BY J32014−29
J32014−29     SUPERSEDED BY J32014−89
J32014−89     REPLACED BY J32014−116
J32014-116    REPLACEMENT EQPT - LOWER BEARING SEALS, MLG
J32015-1      RIGGING EQPT - NLG "NOT COMPRESSED" SENSORS
J32016−1      REPLACED BY J32016−9
J32016-9      PULLER, PIN - RETRACT ACTUATOR, MLG
J32017−1      SUPERSEDED BY J32017−10
J32017-10     SLING ASSY - ACTUATOR, MLG DOOR
J32018−1      SUPERSEDED BY J32018−14
J32018-14     ADJUSTMENT EQPT - DOWNLOCK STOP, MLG SIDE & DRAG STRUTS
J32018-19     ADJUSTMENT EQPT - DOWNLOCK STOP, MLG SIDE & DRAG STRUTS
J32019−1      SUPERSEDED BY J32019−50
J32019−50     REPLACED BY J32019−59
J32019-59     SLING EQPT - RETRACT ACTUATOR R & I, MLG
J32020-1      SLING - STEERING & TRUCK POSITIONER ACTUATORS, MLG
J32021−1      SUPERSEDED BY J32021−20
J32021-20     REMOVAL/INSTL EQPT - RETRACT ACTUATOR, NLG
J32025-1      HOIST ADAPTER EQPT - NLG DRAG STRUT, RMVL/ INSTL
J32026-1      SLING EQPT - HANDLING, NLG
J32027−1      SUPERSEDED BY J32027−47
J32027−47     REPLACED BY J32027−63
J32027-63     HOIST EQPT - RMVL/INSTL, NLG
J32028-1      LOCK PIN EQPT - MLG AND NLG DOORS
J32030−1      SUPERSEDED BY J32020−44
                                                                        www.sinters.ca
PART NUMBER                                DESCRIPTION
J32030-44          DOLLY - TRANSPORTATION NOSE LANDING GEAR
J32031−1           SUPERSEDED BY J32031−12
J32031-12          PROTECTOR EQPT - AXLE, MAIN LANDING GEAR
J32032−19          SUPERSEDED BY J32032−22
J32032−19          SUPERSEDED BY J32032−22
J32032-22          WRENCH EQPT - WHEEL RETENTION NUT, MLG
J32033             CANCELLED
J32033−1           SUPERSEDED BY J32033−10
J32034-1           TURNBUCKLE - TRUCK POSITION ACTUATOR, MLG
J32036−1           SUPERSEDED BY J32036−19
J32036−19          SUPERSEDED BY J32036−27
J32036−40          SUPERSEDED BY J32036−55
J32036−53          SUPERSEDED BY J32036−56
J32036−55          REPLACED BY J32036−57
J32036-27          RMVL/INSTL EQPT - AFT TRUNNION PIN, MLG
J32036-56          RMVL/INSTL EQPT - AFT TRUNNION PIN, MLG
J32036-57          RMVL/INSTL EQPT - AFT TRUNNION PIN, MLG
J32037−1           SUPERSEDED BY J32037−31
J32037−102         REPLACED BY J32037−105
J32037−102         SUPERSEDED BY J32037−121
J32037−105         SUPERSEDED BY J32037−122
J32037−116         SUPERSEDED BY J32037−123
J32037−120         REPLACED BY J32037−122
J32037−121         REPLACED BY J32037−122
J32037−31          SUPERSEDED BY J32037−45
J32037−45          SUPERSEDED BY J32037−85
J32037−59          SUPERSEDED BY J32037−82
J32037−82          REPLACED BY J32037−105
J32037−82          SUPERSEDED BY J32037−120
J32037−85          SUPERSEDED BY J32037−119
J32037-106         SPRING RMVL/INSTL EQPT - MLG & NLG
J32037-119         SPRING RMVL/INSTL EQPT - MLG & NLG
J32037-122         SPRING RMVL/INSTL EQPT - MLG & NLG
J32037-123         SPRING RMVL/INSTL EQPT - MLG & NLG
J32038−1           SUPERSEDED BY J32038−19
J32038−1           SUPERSEDED BY J32038−20
J32038−19          SUPERSEDED BY J32038−40
J32038−20          SUPERSEDED BY J32038−42
J32038−31          SUPERSEDED BY J32038−41
J32038-42          RMVL/INSTL EQPT - FUSE PIN, MLG FWD TRUNNION SUPPORT
J32038-52          RMVL/INSTL EQPT - FUSE PIN, MLG FWD TRUNNION SUPPORT
J32038-53          RMVL/INSTL EQPT - FUSE PIN, MLG FWD TRUNNION SUPPORT
J32042−1           SUPERSEDED BY J32042−89
J32042-89          WRENCH KIT - LANDING GEAR
J32043−1           SUPERSEDED BY J32043−114
J32043−114         SUPERSEDED BY J32043−151
J32043−6           SUPERSEDED BY J32043−150
J32043-119         EQPT - MLG, RMVL & INSTL
J32043-123         EQPT - MLG, RMVL & INSTL
J32043-124         EQPT - MLG, RMVL & INSTL
J32043-125         EQPT - MLG, RMVL & INSTL
J32043-150         EQPT - MLG, RMVL & INSTL
J32043-151         EQPT - MLG, RMVL & INSTL
J32045             CANCELLED
J32048−1           SUPERSEDED BY J32048−25
J32048−25          REPLACED BY J32048−27
J32048-27          HANDLING EQPT - MLG TORSION LINKS
J32052-1           EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING
J32053−1           REPLACED BY J32053−92
J32053-92          FIXTURE EQPT - FUNCTIONAL TEST, LDG GR ACTR
J32054−1           SUPERSEDED BY J32054−50
J32054−1/−34/−35   REPLACED BY J32054−37/−38/−39
J32054−34          SUPERSEDED BY J32054−51
J32054−35          SUPERSEDED BY J32054−52
J32054−37          SUPERSEDED BY J32054−50
J32054−38          SUPERSEDED BY J32054−51
J32054−39          SUPERSEDED BY J32054−52
J32054−52          SUPERSEDED BY J32054−91
J32054−53          SUPERSEDED BY J32054−92
J32054-50          RETAINER EQPT - MLG/NLG TORSION LINK
J32054-51          RETAINER EQPT - MLG/NLG TORSION LINK
J32054-91          RETAINER EQPT - MLG/NLG TORSION LINK
J32054-92          RETAINER EQPT - MLG/NLG TORSION LINK
J32055−48          SUPERSEDED BY J32055−50
J32055-01          TORQUE ADAPTER SET - LANDING GEAR COMPONENTS
J32055-03          TORQUE ADAPTER SET - LANDING GEAR COMPONENTS
J32055-50          TORQUE ADAPTER SET - LANDING GEAR COMPONENTS
J32055-61          TORQUE ADAPTER SET - LANDING GEAR COMPONENTS
J32055-81          TORQUE ADAPTER SET - LANDING GEAR COMPONENTS
J32055-82          TORQUE ADAPTER SET - LANDING GEAR COMPONENTS
                                                                          www.sinters.ca
PART NUMBER                           DESCRIPTION
J32056-1      FIXTURE ASSY - FUNCTIONAL TEST, NLG STEERING ACTR
J32057−1      REPLACED BY J32057−108
J32057−94     REPLACED BY J32057−108
J32057-108    FIXTURE EQPT - LANDING GEAR, ACTUATOR ASSYS
J32058-1      CHECK EQUIP - BACKLASH, NLG STEERING GEARBOX
J32059−1      REPLACED BY J32059−7
J32059-7      SPANNER WRENCH & SOCKET - ROD GLAND NUT & BOLT,
J32060-1      DRAIN EQPT - OLEO STRUT, MLG/NLG
J32061−1      SUPERSEDED BY J32061−35
J32061-35     SHOCK STRUT EQPT - COMPONENT MAINTENANCE, NLG
J32062-1      EQUIPMENT - TRANSPORTER, TOWER JACK, MLG
J32063-1      LOCATING EQPT - UPLOAD ROLLER, MLG DOOR
J32064-1      OVERHAUL EQPT - UPLOCK ASSY, MAIN LANDING GEAR
J32065-1      ALIGNMENT PIN, MAIN LANDING GEAR TOW FITTING
J32065-7      ALIGNMENT PIN, MAIN LANDING GEAR TOW FITTING
J32066−1      REPLACED BY J32066−157
J32066-157    BUILD-UP EQPT - TRUCK BEAM, MAIN LANDING GEAR
J32067−1      SUPERSEDED BY J32067−46
J32067-46     FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS
J32068-1      SHOCK STRUT EQPT - COMPONENT MAINTENANCE, MLG
J32069−1      SUPERSEDED BY J32069−179
J32069−2      SUPERSEDED BY J32069−180
J32069−3      SUPERSEDED BY J32069−3
J32069-129    BUILD-UP FIXTURE EQPT - OLEO STRUT, MLG
J32069-176    BUILD-UP FIXTURE EQPT - OLEO STRUT, MLG
J32069-179    BUILD-UP FIXTURE EQPT - OLEO STRUT, MLG
J32069-180    BUILD-UP FIXTURE EQPT - OLEO STRUT, MLG
J32069-181    BUILD-UP FIXTURE EQPT - OLEO STRUT, MLG
J32070−59     REPLACED BY J32070−64
J32070−59     SUPERSEDES J32070−1
J32070-64     BUILD-UP FIXTURE EQPT - SHOCK STRUT, NLG
J32071−1      SUPERSEDED BY J32071−8
J32071−8      SUPERSEDED BY J32071−10
J32071-10     LOCKOUT PIN - FWD & AFT LOCK LINK, RETR TAIL SKID
J32072−1      REPLACED BY J32072−22
J32072−1      SUPERSEDED BY J32072−34
J32072−22     SUPERSEDED BY J32072−35
J32072−27     SUPERSEDED BY J32072−36
J32072−28     SUPERSEDED BY J32072−37
J32072−34     REPLACED BY J32072−35
J32072-35     REMOVAL EQPT - DYNAMIC SEAL, NLG & MLG
J32072-36     REMOVAL EQPT - DYNAMIC SEAL, NLG & MLG
J32072-37     REMOVAL EQPT - DYNAMIC SEAL, NLG & MLG
J32073−1      SUPERSEDED BY J32073−21
J32073-21     HOIST EQPT - RMVL/INSTL, INNER CYLINDER, NLG
J32074−1      SUPERSEDED BY J32074−30
J32074-30     SLING EQUIPMENT - MLG DOOR HANDLING
J32075-1      SPRING EQPT - MLG SIDE STRUT
J32076-1      SLING EQPT - INNER CYLINDER, MLG
J32076-13     SLING EQPT - INNER CYLINDER, MLG
J32077−1      REPLACED BY J32077−55
J32077−1      REPLACED BY J32077−67
J32077−55     REPLACED BY J32077−67
J32077-67     TRANSPORTATION DOLLY EQPT - STRUT ASSY/INNER CYL MLG
J32080-1      FIXTURE EQUIPMENT - FUNCTIONAL TEST, DOOR, MLG ACTR
J32081-1      SOCKET EQPT - RETAINING NUT ASSY, LWR DRAG STRUT, NLG
J32082−1      SUPERSEDED BY J32082−69
J32082-69     REPLACEMENT EQPT - LOWER BEARING SEALS, MLG
J32083-1      SHOCK STRUT EQPT - COMPONENT MAINTENANCE, MLG
J32084-1      SHOCK STRUT EQPT - COMPONENT MAINTENANCE, NLG
J32085−1      SUPERSEDED BY J32085−76
J32085−72     SUPERSEDED BY J32085−77
J32085-76     WRENCH KIT - MLG & NLG
J32085-77     WRENCH KIT - MLG & NLG
J32086-1      SPANNER SOCKET KIT - NLG
J32087-1      TURNBUCKLE EQPT - SHOCK STRUT, MLG
J32089-1      FIXTURE EQPT - HYDRAULIC STRUT, ACTUATOR ASSY,
J34001        REPLACED BY A34016.
J34001−17     REPLACED BY J34001−58
J34001−18     REPLACED BY J34001−59
J34001−19     REPLACED BY J34001−50
J34001−20     REPLACED BY J34001−51
J34001−23     REPLACED BY J34001−52
J34001−24     REPLACED BY J34001−53
J34001−25     REPLACED BY J34001−54
J34001−26     REPLACED BY J34001−55
J34001−27     REPLACED BY J34001−56
J34001−28     REPLACED BY J34001−57
J34001-50     BREAKOUT BOX - LINE MAINTENANCE
J34001-51     BREAKOUT BOX - LINE MAINTENANCE
                                                                      www.sinters.ca
PART NUMBER                           DESCRIPTION
J34001-52     BREAKOUT BOX - LINE MAINTENANCE
J34001-53     BREAKOUT BOX - LINE MAINTENANCE
J34001-54     BREAKOUT BOX - LINE MAINTENANCE
J34001-55     BREAKOUT BOX - LINE MAINTENANCE
J34001-56     BREAKOUT BOX - LINE MAINTENANCE
J34001-57     BREAKOUT BOX - LINE MAINTENANCE
J34001-58     BREAKOUT BOX - LINE MAINTENANCE
J34001-59     BREAKOUT BOX - LINE MAINTENANCE
J34002−1      SUPERSEDED BY J34002−18
J34002−18     REPLACED BY J34002−19
J34002-19     TEST FIXTURE - ANGLE OF ATTACK
J34003-01     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J34003-02     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J34003-03     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J34003-04     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J34003-05     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J34003-06     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J34003-55     BREAKOUT BOX EQUIPMENT - MISC. CONNECTOR LINE MAINT.
J35001-1      WINE BOTTLE OXYGEN RACK RMVL/INSTL TOOL
J36001−1      SUPERSEDED BY J36001−102
J36001-102    PRECOOLER EQPT - REMOVAL/INSTALLATION, RR TRENT 800
J36002−1      SUPERSEDED BY J36002−263
J36002−263    SUPERSEDED BY J36002−338
J36002-338    PRECOOLER R/I EQPT - PW ENGINES
J36004-1      EQUIP - PRECOOLER, RMVL/INSTL PW ENGINES
J36006-1      RMVL/INSTL EQPT - PRECOOLER, GE90 ENGINE
J36008-1      PRESSURE TEST EQPT - DUCT ASSY
J36009-1      PRESSURE TEST EQPT - DUCT ASSY
J36010-1      PRESSURE TEST - EQPT DUCT ASSY
J36011-1      PRESSURE TEST EQPT - DUCT ASSY
J36012-1      PRESSURE TEST EQPT - DUCT ASSY
J36013-1      PRESSURE TEST EQPT - DUCT ASSY
J36014-1      PRESSURE TEST EQPT - DUCT ASSY
J36015-1      PRESSURE TEST EQPT - DUCT ASSY
J36016-1      PRESSURE TEST EQPT - DUCT ASSY
J36018-1      PRESSURE TEST EQPT - DUCT ASSY
J36019-1      PRESSURE TEST EQPT - DUCT ASSY
J36020-1      REMOVAL/INSTALLATION EQPT - PRECOOLER, GE90 ENGINES
J38001−1      SUPERSEDED BY J38001−16
J38001-16     PRESSURIZATION EQPT - WASTE DRAIN SYSTEM
J45001-1      GSE KIT - LAPTOP
J45001-10     GSE KIT - LAPTOP
J45001-12     GSE KIT - LAPTOP
J45001-13     GSE KIT - LAPTOP
J45002-1      ADAPTER CABLE - PMAT TO RJ-45
J46001-1      ALIGNMENT FIXTURE - EFB DISPLAY UNIT
J49001−1      SUPERSEDED BY J49001−9
J49001-9      BALLAST - FISHPOLE INSTL, APU GENERATOR REMOVED
J49002−1      SUPERSEDED BY J49002−21
J49002−21     SUPERSEDED BY J49002−25
J49002−25     SUPERSEDED BY J49002−29
J49002-29     SLING - APU
J49003−1      SUPERSEDED BY J49003−43
J49003-43     HOIST EQPT - APU, INSTALLATION/REMOVAL
J49003-47     HOIST EQPT - APU, INSTALLATION/REMOVAL
J49004        CANCELLED
J49005-1      JACKING ADAPTER - APU CRADLE
J49006−1      SUPERSEDED BY J49006−48
J49006−48     SUPERSEDED BY J49006−55
J49006−55     SUPERSEDED BY J49006−67
J49006-67     CRADLE - APU
J49007−1      SUPERSEDED BY J49007−29
J49007-29     DOLLY TRANSPORTATION - APU
J51001-1      BARRIER - 48 SECT, SERVICE ACCEDSS DOOR
J51002−1      SUPERSEDED BY J51002−7
J51002-7      PLATFORM - SERVICE, FWD APU FIREWALL
J51003−2      SUPERSEDED BY J51003−59
J51003-1      STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACE
J51003-59     STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACE
J51005-1      INSTL/REMOVAL ADAPTER, - FUSELAGE DRAIN VALVE
J52001−1      SUPERSEDED BY J52001−34
J52001-34     HOLD OPEN EQPT - PASSENGER ENTRY DOOR
J52002-1      SLING EQPT - BULK CARGO DOOR
J52003-1      BARRIER - SAFETY, ACCESS DOOR
J52003-2      BARRIER - SAFETY, ACCESS DOOR
J52005        CANCELLED
J52009−1      SUPERSEDED BY J52009−49
J52009−2      SUPERSEDED BY J52009−50
J52009−3      SUPERSEDED BY J52009−51
J52009−4      SUPERSEDED BY J52009−52
                                                                     www.sinters.ca
PART NUMBER                          DESCRIPTION
J52009−5      SUPERSEDED BY J52009−53
J52009−6      SUPERSEDED BY J52009−54
J52009-49     BARRIER - PASSENGER ENTRY DOORS
J52009-50     BARRIER - PASSENGER ENTRY DOORS
J52009-51     BARRIER - PASSENGER ENTRY DOORS
J52009-52     BARRIER - PASSENGER ENTRY DOORS
J52009-53     BARRIER - PASSENGER ENTRY DOORS
J52009-54     BARRIER - PASSENGER ENTRY DOORS
J52011-1      SAFETY BARRIER - CARGO DOORS
J52011-2      SAFETY BARRIER - CARGO DOORS
J52013-1      TOOL KIT, - CARGO DOOR RIGGING ADJUST
J52014-1      RIGGING SIMULATOR - ESCAPE SLIDE, PASSENGER DOOR
J52017-*      DATA SHEET-POWER TOOL, - LARGE CARGO DOOR
J52020-1      BARRIER - BULK CARGO DOOR
J52021-1      SCREW EQPT - SAFETY, PASS. DOOR COUNTER-BALANCE SPRING
J52023-1      BACKLASH FIXTURE - LARGE CARGO DOOR, MAN. DRIVE GEARBOX
J52024-1      TEST EQPT - LATCH ASSY, BLOW OUT DOORS
J52024-2      TEST EQPT - LATCH ASSY, BLOW OUT DOORS
J52024-3      TEST EQPT - LATCH ASSY, BLOW OUT DOORS
J52025-1      EQPT - INSTALLATION, SMALL CARGO DOOR VENT DOOR
J52026-1      COMPRESSION EQPT - BULK CARGO DOOR
J52027-1      TEST BOX - CONNECTOR, SQUIB
J52028-1      BLACKLASH FIXTURE EQPT - MANUAL DRIVE GEARBOX,
J52029−1      SUPERSEDED BY J52029−57
J52029-57     TEST EQPT - SQUIB, OVERWING EXIT
J52030-1      REMOVAL/INSTL EQPT - MLG DOOR
J52031-1      TOOL - SPRING COMPRESSION, PASSENGER ENTRY
J52032-1      SLING - MAIN DECK CARGO DOOR
J52037-1      SWITCH ACTUATOR - MAIN DECK CARGO DOOR SWITCH
J53001-1      LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN
J53002-1      ACCESS LADDER - HORIZONTAL STABILIZER
J53003−1      REPLACED BY J53003−174
J53003-174    MAINT PLATFORM EQPT - PRESSURE BULKHEAD ACCESS
J53004-1      WRENCH SET - TORQUE ADJUSTMENT, RADOME LATCH
J54001−1      SUPERSEDED BY J54001−68
J54001−2      SUPERSEDED BY J54001−93
J54001−60     SUPERSEDED BY J54001−94
J54001−68     SUPERSEDED BY J54001−92
J54001-73     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54001-74     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54001-75     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54001-76     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54001-92     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54001-93     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54001-94     STRUT UNLOAD SLING - DIAGONAL BRACE ALIGNMENT
J54002−1      SUPERSEDED BY J54002−63
J54002−63     SUPERSEDED BY J54002−85
J54002-85     SLING EQPT - STRUT REMOVAL/INSTL, PW ENGINE
J54003-1      SLING EQPT - REMOVAL/INSTALLATION, ENGINE STRUT
J54003-2      SLING EQPT - REMOVAL/INSTALLATION, ENGINE STRUT
J54004−1      SUPERSEDED BY J54004−62
J54004-62     REMOVAL/INSTL EQPT - AFT STRUT FAIRING
J54005−1      REPLACED BY J54005−32
J54005-32     HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL
J54007−1      SUPERSEDED BY J54007−41
J54007−26     SUPERSEDED BY J54007−42
J54007−27     SUPERSEDED BY J54007−43
J54007−41     REPLACED BY J54007−53
J54007−42     REPLACED BY J54007−54
J54007−43     REPLACED BY J54007−55
J54007−44     REPLACED BY J54007−56
J54007-52     REMOVAL/INST KIT - FUSE PIN
J54007-53     REMOVAL/INST KIT - FUSE PIN
J54007-54     REMOVAL/INST KIT - FUSE PIN
J54007-55     REMOVAL/INST KIT - FUSE PIN
J54007-56     REMOVAL/INST KIT - FUSE PIN
J54009-1      SLING EQPT - STRUT AFT FAIRING
J54013        REPLACED BY J54014
J54013−1      REPLACED BY J54014−1
J54013-1      SLING EQUIPMENT - DIAGONAL BRACE UNLOAD, PW ENGINE
J54014-1      SLING EQPT - STRUT FUSE PIN UNLOAD (GE, PW & RR ENG)
J54014-2      SLING EQPT - STRUT FUSE PIN UNLOAD (GE, PW & RR ENG)
J54014-3      SLING EQPT - STRUT FUSE PIN UNLOAD (GE, PW & RR ENG)
J54015-1      JIG - LOCATING, SIDE LINK HOLE CENTERS
J55001−1      SUPERSEDED BY J55001−13
J55001-13     BEARING EQPT - HORIZ STAB, REMOVAL/INSTL
J55002−1      REPLACED BY J55002−21
J55002−21     SUPERSEDED BY J55002−36
J55002−29     SUPERSEDED BY J55002−37
J55002-36     LOCK ASSY - HORIZONTAL STABILIZER
                                                                        www.sinters.ca
PART NUMBER                          DESCRIPTION
J55002-37     LOCK ASSY - HORIZONTAL STABILIZER
J55003-1      REMOVAL/INSTL EQPT - HINGE PIN, HORIZ STABILIZER
J55004-1      JACKING EQUIPMENT - HORIZONTAL STABILIZER
J55005-1      SLING EQPT - REM/INSTL, VERTICAL FIN
J55005-32     SLING EQPT - REM/INSTL, VERTICAL FIN
J56001-1      PROTECTIVE COVER - MAINTENANCE ACCESS TERMINAL
J57002-1      LOCATING EQPT - WEDGE REPLACEMENT, INBD/OUTBD LE SLAT
J57002-34     LOCATING EQPT - WEDGE REPLACEMENT, INBD/OUTBD LE SLAT
J57003-1      SLING EQPT - RAKED WING TIP INSTALLATION AND REMOVAL
J71001−1      SUPERSEDED BY J71001−35
J71001−35     SUPERDEDED BY J71001−44
J71001−44     SUPERSEDED BY J71001−59
J71001−59     SUPERSEDED BY J71001−63
J71001−63     REPLACED BY J71001−66
J71001-66     SLING EQUIPMENT - INLET COWL
J71002−1      SUPERSEDED BY J71002−30
J71002−30     SUPERSEDED BY J71002−47
J71002−47     SUPERSEDED BY J71002−52
J71002−52     REPLACED BY J71002−57
J71002-57     TORQUE EQPT - ENGINE MOUNT BOLT GE90
J71003−1      SUPERSEDED BY J71003−81
J71003−136    SUPERSEDED BY J71003−145
J71003−145    SUPERSEDED BY J71003−148
J71003−148    REPLACED BY J71043−1
J71003−81     SUPERSEDED BY J71003−86
J71003−86     SUPERSEDED BY J71003−123
J71003-143    BOOTSTRAP EQPT - GE90 ENGINE
J71004−1      SUPERSEDED BY J71004−9
J71004-9      SLING - FAN COWL
J71005−1      SUPERSEDED BY J71005−62
J71005−1      SUPERSEDED BY J71005−63
J71005−62     SUPERSEDED BY J71005−73
J71005−63     SUPERSEDED BY J71005−74
J71005−73     REPLACED BY J71005−84
J71005−74     REPLACED BY J71005−85
J71005-84     BOOTSTRAP EQPT - PW ENGINES
J71005-85     BOOTSTRAP EQPT - PW ENGINES
J71006-*      SPECIFICATION - POWERED HOIST SYS, GSE OPERATION
J71007−1      SUPERSEDED BY J71007−23
J71007−23     SUPERSEDED BY J71007−26
J71007−26     SUPERSEDED BY J71007−29
J71007−29     SUPERSEDED BY J71007−50
J71007−50     REPLACED BY J71007−70
J71007-70     TORQUE EQPT - MOUNT BOLTS, PW ENGINES
J71008−1      REPLACED BY J71008−8
J71008-8      TORQUE EQPT - ROLLS-ROYCE, TRENT, ENGINE MOUNT
J71009−1      SUPERSEDED BY J71009−39
J71009−2      SUPERSEDED BY J71009−40
J71009−39     SUPERSEDED BY J71009−56
J71009−40     SUPERSEDED BY J71009−57
J71009−56     SUPERSEDED BY J71009−39
J71009−56     SUPERSEDED BY J71009−62
J71009−57     SUPERSEDED BY J71009−40
J71009−57     SUPERSEDED BY J71009−63
J71009−62     SUPERSEDED BY J71009−68
J71009−63     SUPERSEDED BY J71009−69
J71009-68     BOOTSTRAP EQPT - TRENT 800 ENGINE
J71009-69     BOOTSTRAP EQPT - TRENT 800 ENGINE
J71010−1      SUPERSEDED BY J71010−8
J71010-8      LIFT FIXTURE - FWD & AFT MOUNT, PW ENGINES
J71011-1      GUARD - INLET ENGINE RUNUP SAFETY
J71013−1      REPLACED BY J71013−25
J71013−22     SUPERSEDED BY J71013−44
J71013-25     ADAPTER EQPT - STABILIZATION, PW ENGINE MOUNTS
J71013-44     ADAPTER EQPT - STABILIZATION, PW ENGINE MOUNTS
J71015−1      SUPERSEDED BY J71015−9
J71015−14     REPLACED BY J71015−18
J71015−9      SUPERSEDED BY J71015−14
J71015-18     SLING EQPT - FAN COWL SUPPORT BEAM, PW & GE90 ENGINES
J71017−1      SUPERSEDED BY J71017−15
J71017-15     SLING - ENGINE MOUNT, FWD AND AFT, RR TRENT 800
J71019-1      STABILIZATION EQPT - ENGINE MOUNTS, RR TRENT 800
J71019-2      STABILIZATION EQPT - ENGINE MOUNTS, RR TRENT 800
J71025−1      SUPERSEDED BY J71025−63
J71025−2      SUPERSEDED BY J71025−64
J71025-63     BRACE - FWD/AFT ENG MOUNTS, PW ENGINE TRANSPORTATION
J71025-64     BRACE - FWD/AFT ENG MOUNTS, PW ENGINE TRANSPORTATION
J71026-1      WRENCH EQPT - IMMED CASE TO FWD MOUNT, PW ENGINES
J71030-1      UNLOCK POLE - FAN COWL HOLD OPEN RODS
J71031−1      SUPERSEDED BY J71031−18
                                                                      www.sinters.ca
PART NUMBER                          DESCRIPTION
J71031−5      SUPERSEDED BY J71031−19
J71031-18     ALIGNMENT/THREAD PROTECTOR EQPT - THRUST LINK, RR ENGINES
J71031-19     ALIGNMENT/THREAD PROTECTOR EQPT - THRUST LINK, RR ENGINES
J71032−1      REPLACED BY J71032−11
J71032−2      REPLACED BY J71032−11
J71032-11     MAT - PROTECTIVE, ENGINE INLET GE, PW & RR
J71032-15     MAT - PROTECTIVE, ENGINE INLET GE, PW & RR
J71032-19     MAT - PROTECTIVE, ENGINE INLET GE, PW & RR
J71033−1      SUPERSEDED BY J71033−109
J71033-109    HOLD OPEN EQPT - FAN COWL, TRENT 800
J71034-1      PROOF LOAD FIXTURE - HOLD OPEN EQPT, FAN COWL, TRENT 800
J71035-1      LOCATING JIG EQPT - EBU TO STRUT, PW ENGINES
J71036-1      LOCATING JIG EQPT - EBU TO STRUT, GE ENGINES
J71037-1      ADAPTER SSEMBLY - STABILIZATION, RR AFT ENGINE MOUNT
J71038-1      STAND ASSY - STORAGE, INLET ASSEMBLY
J71038-2      STAND ASSY - STORAGE, INLET ASSEMBLY
J71038-3      STAND ASSY - STORAGE, INLET ASSEMBLY
J71038-63     STAND ASSY - STORAGE, INLET ASSEMBLY
J71039-1      GUARD - INLET, ENGINE RUNUP SAFETY
J71040-1      LOCATING JIG EQPT - EBU TO STRUT, ROLLS ROYCE ENGINE
J71042-1      LOCATING JIG EQPT - EBU TO STRUT, GE90-115B ENGINES
J71043−1      SUPERSEDED BY J71043−36
J71043−36     SUPERSEDED BY J71043−46
J71043−46     SUPERSEDED BY J71043−53
J71043−53     SUPERSEDED BY J71043−89
J71043-89     BOOTSTRAP EQPT - GE90 ENGINES
J71045        INTERFACE CONTROL, GE90 BOOTSTRAP/GROUND HANDLING
J71046-       SPECIFICATION - LOAD CELL EQUIPMENT
J76001-1      TEST FIXTURE - THRUST LEVER CONTROL STAND
J76002-1      WRENCH - SPANNER, THRUST LEVER CNTL STAND SHAFT ASSY
J78001        CANCELLED
J78001        SUPERSEDED BY J78022
J78002−1      SUPERSEDED BY J78002−32
J78002−32     SUPERSEDED BY J78002−56
J78002−56     SUPERSEDED BY J78002−61
J78002−61     SUPERSEDED BY J78002−64
J78002-64     SLING EQPT - PW FAN THRUST REVERSER
J78003−1      SUPERSEDED BY J78003−12
J78003−12     SUPERSEDED BY J78003−18
J78003−18     SUPERSEDED BY J78003−27
J78003-27     HOLD OPEN EQPT - GE90 FAN REVERSER
J78004−1      SUPERSEDED BY J78004−42
J78004−1      SUPERSEDED BY J78004−43
J78004−1      SUPERSEDED BY J78004−72
J78004−42     SUPERSEDED BY J78804−74
J78004−43     SUPERSEDED BY J78004−75
J78004−72     SUPERSEDED BY J78004−76
J78004−89     REPLACED BY J78004−123
J78004-123    SLING EQPT - GE90 FAN THRUST REVERSER
J78004-90     SLING EQPT - GE90 FAN THRUST REVERSER
J78005-1      THREAD PROTECTOR EQUIPMENT - GE90, P/W & RR
J78005-10     THREAD PROTECTOR EQUIPMENT - GE90, P/W & RR
J78005-2      THREAD PROTECTOR EQUIPMENT - GE90, P/W & RR
J78005-3      THREAD PROTECTOR EQUIPMENT - GE90, P/W & RR
J78006-1      HOLD OPEN EQPT - THRUST REVERSER, RR TRENT 800
J78007−1      SUPERSEDED BY J78007−52
J78007−52     SUPERSEDED BY J78007−58
J78007-58     RMVL/INSTL EQPT - EXH SLEEVE & PLUG, PW/RR
J78012-1      SLING EQPT - SLEEVE, THRUST REVERSER, 777 PW ENGINES
J78015-1      SLING EQPT - REM/INSTL, GE90 FAN REVERSER SLEEVE
J78015-77     SLING EQPT - REM/INSTL, GE90 FAN REVERSER SLEEVE
J78015-96     SLING EQPT - REM/INSTL, GE90 FAN REVERSER SLEEVE
J78015-97     SLING EQPT - REM/INSTL, GE90 FAN REVERSER SLEEVE
J78017−1      SUPERSEDED BY J78017−59
J78017-59     SLING EQPT - RR FAN THRUST REVERSER
J78019−1      SUPERSEDED BY J78019−72
J78019-72     STAND - TRANSPORTATION/WORK, RR TRENT 800 THRUST REVERSER
J78022−1      SUPERSEDED BY J78022−35
J78022−35     SUPERSEDED BY J78022−45
J78022−45     SUPERSEDED BY J78022−53
J78022−53     SUPERSEDED BY J78022−60
J78022-60     HOLD OPEN EQPT - THRUST REVERSER P/W ENGINES
J78023−1      SUPERSEDED BY J78023−102
J78023-102    STAND - TRANSPORTATION, PW FAN THRUST REVERSER
J78026−1      SUPERSEDED BY J78026−75
J78026-75     SLING EQPT - REM/INSTL, RR FAN REVERSER SLEEVE
J78029        CANCELLED
J78031−1      SUPERSEDED BY J78031−81
J78031−81     SUPERSEDED BY J78031−85
J78031-85     STAND - TRANSPORTATION/WORK GE90 THRUST REVERSER
                                                                          www.sinters.ca
PART NUMBER                          DESCRIPTION
J78032-1      CLAMP EQPT - BONDING, P&W THRUST REVERSER SLIDER TEFLON TAPE
J78033-1      CLAMP EQPT - BONDING, RR THRUST REVERSER SLIDER TEFLON TAPE
J78034-1      CLAMP EQPT - BONDING, GE THRUST REVERSER SLIDER TEFLON TAPE
JLA321C
JLA321C
K07001        EMERGENCY JACKING EQUIPMENT - MLG
K07002        EMERGENCY JACKING EQUIPMENT - NLG
K07003        JACK FITTING - FWD BODY
K07004        JACK FITTING EQPT - INNER WING
K07005        JACK FITTING EQPT - OUTER WING
K09001        DATA SHEET - TOW BAR DESIGN SPECIFICATION
K10001        PROTECTIVE COVER - WHEEL/TIRE/BRAKE, MLG & NLG
K10002        PLUG - INLET VENT, RR TRENT 1000
K10003        TETHERING EQPT - ENGINE PYLON, AIRPLANE
K10004        PLUG SET - EXHAUST VENT, THERMAL ANTI-ICING
K10010        TETHERING EQPT - INBD & OUTBD FLAP SUPPORT
K10011        PROTECTIVE COVER - ENGINE INLET, RR
K12001        SPECIFICATION - ACCESS PLATFORM, MLG WHEEL WELL
K20002        PERSONNEL EQPT - SHOCK ABSORBING LANYARD,
K20004        PERSONNEL EQPT - SHOCK ABSORBING LANYARD,
K20005        WORK TABLE - PILOTS AISLE STAND
K24001        HOIST ADAPTER ASSY - VFSG (GE AND RR) AND ASG
K24002        DISPATCH EQPT- MOTOR CONTROLLERS
K24003        BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS,
K24004        BREAKOUT EQUIPMENT - POWER CONVERSION PANEL
K24006        BREAKOUT BOX-AUTO TRANSFORMER RECTIFIER UNIT
K24007        BREAKOUT BOX EQPT - MOTOR CONTROLLERS
K24008        BREAKOUT BOX - REMOTE POWER DISTRIBUTION UNITS
K24011        BREAKOUT BOX - START POWER UNIT (SPU, INLINE)
K25001        LEVER - STOWAGE BIN RELEASE
K25007        CART - PASSENGER SEAT
K26001        TEST EQUIPMENT - FIRE EXT TUBING, CARGO
K26003        TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM
K27002        ADAPTER EQPT - TE GEARED ROTARY ACTUATOR,
K27003        ADAPTER EQPT - AILERON PCU REMOVAL/
K27005        REMOVAL/INSTALLATION EQPT - ELEVATOR PCU
K27006        REMOVAL/INSTALLATION EQUIPMENT - SPOILER
K27007        DRIVE ADAPTER - ACTUATOR, HORIZONTAL STABILIZER
K27008        SLING EQUIPMENT - REMOVAL/INSTALLATION, AILERON
K27012        DRIVE ADAPTER - TORQUE TUBE COUPLING, L.E. SLAT
K27013        ELECTRICAL COVERS - LE SLATS, TE FLAPS,
K27015        LOCK - AILERON POWER CONTROL UNIT
K27016        LOCK - HORIZONTAL STABILIZER ACTUATOR BALL NUT
K27017        LOCK EQUIPMENT- SPOILER HYDRAULIC ACTUATORS
K27021        REMOVAL/INSTALLATION EQPT - HORIZONTAL
K27023        SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION
K27024        SLING EQUIPMENT - INBOARD TE FLAP, REMOVAL AND
K27025        SLING EQUIPMENT- OUTBOARD TE FLAP, REMOVAL AND
K27027        SLING EQUIPMENT - REMOVAL/INSTALLATION, INBOARD
K27028        SPLINE ADAPTER - LE/TE POWER DRIVE UNIT, MANUAL
K27029        EXTENDER BREAKOUT BOX EQPT - FLIGHT CONTROL
K27032        PIN PULLER EQPT - DRIVE LINK, OUTBOARD TE FLAP
K27033        WRENCH SET - WING TE FLAP SUPPORT NUT
K27035        SUPPORT ROD - FLAPERON
K27038        LOCK - RUDDER PCU
K27040        CLAMP EQPT - DRIVE SHAFTS, LE SLATS & TE FLAPS
K27041        DOLLY - HORIZONTAL STABILIZER TRIM ACTUATOR
K27044        SUPPORT EQPT - AILERON
K27045        RIGGING CLAMP - LE KRUEGER FLAP
K28001        SPANNER WRENCH - FUEL SUMP DRAIN VALVE
K28002        DRAIN FITTING - FUEL SYSTEM
K29001        ADAPTER EQPT - EMP REMOVAL/INSTALLATION
K29002        REMOVAL/INSTALLATION EQPT, RAM AIR TURBINE
K30001        BREAKOUT EQPT - WING, TRANSLATING WIRE BUNDLE
K32001        SLING EQUIPMENT - RETRACT ACTUATOR, MLG
K32002        PROTECTOR EQPT - AXLE & THREAD, NLG
K32004        RMVL/INSTL EQPT - FUSE PIN, MLG FWD TRUNNION
K32006        HOIST ADAPTER EQPT - NLG DRAG BRACE RMVL/INSTL
K32007        SPRING RMVL/INSTL EQPT - DRAG BRACE, MLG
K32008-1      SPRING RMVL/INSTL EQPT - DRAG BRACE, MLG
K32009        PULLER EQPT - TRUNNION PIN, NLG ASSY & NLG
K32010        DOLLY - TRANSPORTATION, NLG
K32011        REPLACEMENT EQPT - LOWER BEARING SEALS, MLG
K32012        HOIST EQUIPMENT-RMVL/INSTL, NLG
K32013        RMVL/INSTL EQPT - RETRACT ACTUATOR, NLG
K32015        REPLACEMENT EQPT - LOWER SEALS, NLG
K32016        TURNBUCKLE - TRUCK POSITION ACTUATOR, MLG
K32018        SIDE STRUT ADJUSTING EQPT- DRAG STRUT LOCK LINK
K32020        RETAINER EQUIPMENT - MLG/NLG TORSION LINK
K32021        DISPATCH EQPT - BRAKE / EBA CONNECTOR COVERS
                                                                             www.sinters.ca
PART NUMBER                              DESCRIPTION
K32022             WRENCH - NLG WHEEL RETENTION NUT
K32026             LOCATING EQUIPMENT-UPLOCK ROLLER, MLG DOOR
K32028             SPANNER WRENCH - GLAND NUT, MLG AND NLG
K32030             SLING EQPT - HANDLING, NLG
K32032             SPANNER WRENCH - STEERING NUT, NLG
K32035             REMOVAL & INSTALLATION EQPT - MLG BOGIE PIVOT
K38001             REMOVAL/INSTALLATION EQPT - VACUUM WASTE TANKS
K42001             BREAKOUT BOX EQUIPMENT - RDC CONNECTORS, LINE
K42002             BREAKOUT BOX EQUIPMENT - NETWORK SWITCH, REMOTE
K42003             BREAKOUT EQPT- CCR CABINET (AFDX/POWER,IN-LINE)
K46001             BREAKOUT EQUIPMENT - CORE NETWORK CABINET (IN-
K49001             THREAD PROTECTOR EQPT- APU RETENTION BOLTS
K49002             HOIST EQPT - APU STARTER GENERATOR (ASG)
K51001             STATIC BALANCE EQPT - FLIGHT CONTROL SURFACES
K51002             PLATFORM - SERVICE, FORWARD APU FIREWALL
K51003             ADHESIVE SPREADER
K52001             RIGGING SIMULATOR - ESCAPE SLIDE, PASSENGER
K52002             BARRIER - PASSENGER ENTRY DOORS
K52005             HOLD OPEN EQUIPMENT - PASSENGER ENTRY DOOR
K52007             BARRIER - SAFETY, ACCESS DOORS
K52009             BARRIER - BULK CARGO DOOR
K52010             COMPRESSION SET - SPRING, PASSENGER ENTRY
K52011             INSTALLATION TOOL - DOOR SEAL
K52015             SLING EQUIPMENT - LARGE CARGO DOOR
K52016             SAFETY BARRIER - CARGO DOORS
K52018             DATA SHEET - POWER TOOL, LARGE CARGO DOOR
K52030             ADAPTER - MANUAL DRIVE, LCD
K53002             REM/INSTL EQPT - RADOME
K53005             WRENCH ASSY - TORQUE ADJUSTMENT, RADOME LATCH
K54001             REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT
K54004             SLING EQPT - REMOVAL/INSTALLATION, ENGINE PYLON
K54005             REMOVAL/INSTALLATION KIT - FUSE PIN
K55001             JACKING EQUIPMENT - HORIZONTAL STABILIZER
K55002             LOCK ASSY - HORIZONTAL STABILIZER
K55003             REMOVAL/INSTALLATION EQPT - HINGE PIN,
K56001             SLING SET - #1 & #2 CONTROL CAB WINDOWS
K71002             ENGINE CHANGE KIT - RR
K71003             PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP
K71004             TRANSPORTATION EQPT - ENGINE MOUNT
K71005             TRANSPORTATION EQPT - ENGINE MOUNT
K71006             HOIST EQPT - ENGINE MOUNTS FWD & AFT, RR & GE
K71007             THREAD PROTECTOR EQPT - ENGINE MOUNT & THRUST
K71008             SLING EQPT - FAN COWL SUPPORT BEAM, GE GENX
K71009             SLING - FAN COWL
K78003             THRUST REVERSER CHANGE KIT - RR TRENT 1000
K78005             HOLD OPEN EQPT - HANGAR MAINTENANCE, RR THRUST
K78009             HOLD OPEN EQPT - HANGAR MAINTENANCE, GE THRUST
ME65−73761−1       REPLACED BY COMMERCIAL EQUIPMENT
ME65B83635         TORQUE WRENCH ADAPTER - BRAKE, SIDE GARGO DOOR
MIT65−45116        MISC. TOOL − CONTROL INSTL. SPEED BRAKE
MIT65−51515−1      MECHANISM INSTALLATION − LANDING GEAR CONTROL
MIT65−73715        REPLACED BY F80255−1
MIT65−73715−1,−2   REPLACED BY F80230−1
MIT65−73716        ALIGNMENT & GUIDE PINS, − FIN INSTALLATION
MIT65B00772        REPLACED BY A12001−14
MIT65B01202−1      REPLACED BY J32032
MIT65B01202-1      ADAPTER ASSY, WRENCH - L.G. WHEEL RETAINING NUT
MIT65B90315        SUPERSEDED BY B71044
MIT65B92408-1      ADAPTER - SHAFT ALIGNMENT FIXTURE
MIT69B62284        BYPASS JUMPER PLUG, RETRACTABLE PDU CARGO HANDLING
MITSC4646          MISCELLANEOUS TOOL - STAND, BUILD-UP VARIOUS
OHME65−45888       TRANSPORATION SLING − FWD AIR STAIR
OHME65−45888       CANCELLED
OHME65B94003       SUPERSEDED BY G71006−1
PME65B89603        REPLACED BY A71015
PRE6500780-1       THREAD PROTECTOR - CONE BOLT, A.P.U.
PRE65B00780−1      REPLACED BY G49007−1
PRE65B40136−1      SUPERSEDED BY COMMERCIAL EQUIPMENT
SC-4409-25         WRENCH; AILERON POWER CONTROL LINKAGE USED WITH
SC-4409-26         WRENCH - AILERON POWER CONTROL LINKAGE USED
SE12−5201          SUPERSEDED BY F72942
SE20−0004          REPLACED BY B20004
SE27-0001          CONTROL WHEEL STRAIGHTEDGE STRAIGHTEDGE IS USED
SE27-1001          HOLDER ASSY - STABILIZER TRIM JACKSCREW USED TO
SE27-1011          HOLDER ASSY - STABILIZER TRIM JACKSCREW USED TO
SE27-2004          EXTRACTOR - PISTON USED TO REMOVE PISTON FROM
SE27-2011          TORQUE ADAPTER - RUDDER TRIM KNOB
SE27-4502          GAGE - STAB. TRIM ACTUATOR SEC. BRAKE USED AS A
SE27-6002          ADAPTER - SPOILER ACTUATOR CYLINDER TO REMOVE
SE28−1103          REPLACED BY B28001
                                                                        www.sinters.ca
PART NUMBER                            DESCRIPTION
SE29-1102      WRENCH - HYDRAULIC PUMP TO ENGINE ATTACH TOOL
SE32-1001      ADJUSTING TOOL - MLG DOOR LOCK SWITCH TO TEST
SE52−1002      REPLACED BY B52004−1
SE72-6001      ADJUSTING TOOL ASSY-RELIEF VALVE OIL PRS USED
SE76-1001      HOOK - ENGINE CONTROL FLEXIBLE LINKAGE
SE78-3003      RESTRAINING FIXT - THRUST REVERSER VALVE TO
SE78-3004      END CAP SPANNER PLATE-TR ACTUATOR TO INSTALL OR
SE78-3005      ASSY TOOL - THRUST REVERSER ACTUATOR TOOL
SE78-3010      COMPRESSOR - TR LOCK ACTUATOR RING TO COMPRESS
ST1065C        STANDARD TOOL - INSTALLATION TOOL GROMMET
ST1813A        REPLACED BY ST1813B
ST1813B        BIT - SCREW DRIVER USED TO INSTALL ROLLER
ST1864P        STANDARD TOOL - REAMER-CARBIDE STRAIGHT FLUTE-
ST2207B        CABLE CLAMP - CONTROL CABLE CLAMP APPLIES
ST2580-103     WRENCH - ROD END BEARING TOOL IS USED TO HOLD
ST2580-145B    WRENCH MODIFIED - INB’D LEADING EDGE FLAPS
ST2580-163-1   WRENCH-SPANNER USED TO HOLD 69-17969 RETAINER
ST2580-163A    WRENCH, SPANNER TYPE
ST2580-202     WRENCH - SOCKET MAIN GEAR TRUNNION LINK
ST2580-242     TORQUE WRENCH ADAPTER - BOX-TYPE 4-120 (NOML)
ST2580-243     TORQUE WRENCH ADAPTER - BOX-TYPE 3.37 NOM
ST2580-251     TORQUE WRENCH ADAPTER - 375 SLOT-5 O.DIA
ST2580-263     TORQUE WRENCH ADAPTER - WALKING BEAM ASSY NUT-
ST2580-267     STANDARD TOOL - SPANNER WRENCH ADAPTER FOR
ST2580-269     SOCKET WRENCH - CROSS SLOT NUT 1/2 SQUARE DRIVE
ST2580-270     SOCKET WRENCH - CROSS SLOT NUT 1/2 SQUARE DRIVE
ST2580-271     SOCKET WRENCH - CROSS SLOT NUT 1/2 SQUARE DRIVE
ST2580-292     SPANNER WRENCHES - OFFSET & STRAIGHT
ST2580-302     TORQUE SPANNER
ST2580-315     TORQUE WRENCH ADAPTER
ST2580-325     WRENCH - FOR BACN10GW-NUTS
ST2580-334C    STANDARD TOOL - SPANNER NOSE PLIERS
ST2580-381     WRENCH, - SPANNER FACE TYPE
ST2580-422     SPANNER WRENCH
ST2580-67      WRENCH - SPANNER COAXIAL CONNECTOR
ST2603         WRENCH - INTERNAL HEX BACN10JC
ST30−8783      REPLACED BY ST8783F
ST30-8783      ROAD MAP, TEST TOOL, BEARING PROOF LOAD TEST
ST6396         737 T.E. TRANSMISSION TESTER
ST6760A-1      NOT AVAILABLE
ST6760A-1      NOT AVAILABLE
ST732          CUTTER - SCOTCHAL MARKING MATERIAL
ST848          INSTALLATION TOOL - O-RINGS
ST848R         REMOVAL TOOL - O-RING
ST863-PB       PLUG - MS33660 BEAD PRESSURE TEST DUCT ASSY
ST8709         COUPLING GAGE
ST8709         COUPLING GAGE
ST8783F        STANDARD TOOL - BEARING RETENTION PROOF TEST
ST878D         SLEEVE SET TOOL - FOR PRESETTING BACS13AP
ST879A         HAND PRESETTING TOOL - FOR FLARELESS TUBE FITTING MS21922
ST879AF        HOLDING FIXTURE - FOR HAND SETTING TOOLS ST879A
ST895A-3       PROBE - SURFACE RESISTIVITY MEASUREMENT
ST902-R        REFORM TOOL -FLANGE COUPLING BAC F22AA & BAC
ST918A         MANDRELS - BEARING-PRESSING BACB10A
ST918B         MANDRELS - BEARING-PRESSING BACB10B
ST918C         MANDRELS - BEARING-PRESSING BACB10C
ST918D         MANDRELS - BEARING-PRESSING BACB10D
ST919          SUPPORT - BEARING INSTALLATION
ST919MP        MOUNTING PLATE - BEARING INST.
ST922-C6       STAKING TOOL 3/8 BUSHING BAC B28B-6
ST925          POINT STACKING TOOL - BEARING RETENTION
ST926A         ROLLER STAKING TOOL - FOR SPHERICAL BEARINGS
ST926E         ROLLER SWAGING TOOL - BEARING
ST927          BEARING REMOVAL TOOL
ST927C         BEARING REMOVAL TOOL
ST928C         ROLLER SWAGING TOOL -BEARING SLEEVE
ST929-1A       ROLLER SWAGING TOOL -BEARING SLEEVE
ST929-2C       STAKING TOOL BEARING SLEEVE 6 POINT
ST929-4        LINE STAKING TOOL -BEARING
ST930-LT       LOAD TEST − BEARING BAC 5435
ST931          BALL POINT MULTIPLE - BEARING STAKING TOOL
ST931A         BEARING STAKING TOOL -ADJUSTABLE BALL POINT
ST931D         BEARING STAKING TOOL -ADJUSTABLE BALL POINT
ST932          ROLLER SWAGE TOOL HOOSING - BEARING RETENTION
ST932A-R       ROLLER SWAGE TOOL HOOSING - BEARING RETENTION
ST932B         ROLLER SWAGE TOOL HOOSING - BEARING RETENTION
ST932-P        PILOT ROLLER SWAGE TOOL HOOSING - BEARING RETENTION
ST932-R        ROLLER SWAGE TOOL HOOSING - BEARING RETENTION
ST932-S        ROLLER SWAGE TOOL HOOSING - BEARING RETENTION
ST933-100      SWAGING TOOL-SHAFT - BEARING RING LOCK
                                                                           www.sinters.ca
PART NUMBER                              DESCRIPTION
ST982            SEALANT TOOL
ST991A-2         STANDARD TOOL - REMOVAL TOOL SCRIVET FASTENER
ST992B           BEARING STAKING TOOL -ADJUSTABLE BALL POINT
ST9999CL-201     STANDARD TOOL - COWL LATCHING ASSY, ENGINE FAN COWL
TE65−20804       REPLACED BY F70326−1
TE65−51515−1     REPLACED BY F80256
TE65−51575−1     TEST EQUIPMENT − PLUG−RAM AIR DUCT INSTL STA
TE65−73720−1     REPLACED BY F80209−1
TE65−73720−2     REPLACED BY F80209−1
TE65−73762       REPLACED BY F80184−1
TE65−73791       CANCELLED
TE65−75357       REPLACED BY F80165−1
TE65−82667       SUPERSEDED BY F80173−10
TE65B00776-101
TE65B00776-101
TE65B00776-51
TE65B00776-51
TE65B40719       BREAKOUT BOX - GROUND SAFETY RELAY
TE65B40861-1     TEST EQUIP - WARNING SWITCHES MAIN LANDING GEAR
TE65B40861-1     TEST EQUIP - WARNING SWITCHES MAIN LANDING GEAR
TE65B50041       TEST EQUIPMENT − DRAIN MAST INSTALLATION WASTE
TE69B4825
TE69B4825
TE69B48251       TEST SET − LIGHTNING PROTECTOR
TE69B48251
TE69B48251
TSJ10−60414      TEST JIG − ACTUATOR LOAD FIXTURE
TSJ50−3309−2     LEVER ASSY − HOLDING FIXTURE
TSJ65−44521−1    SUPERSEDED BY F80189−1
TSJ90−10072−1    SUPERSEDED BY F70339−41




                                                                       www.sinters.ca

				
DOCUMENT INFO
Description: Emergency Evacuation and Fire Saftey Template document sample