; Propeller Cup
Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

Propeller Cup

VIEWS: 530 PAGES: 53

  • pg 1
									           “THRU-HUB EXHAUST” PROPELLERS                                        NON THRU-HUB EXHAUST PROPELLERS
                        The thru-hub exhaust propeller design                            Typical applications for this design would
                        utilizes a round barrel to which the blades                      be for:
                        are attached. The exhaust gases pass
                        through the lower unit torpedo and exit                               A) Inboard boats using shaft driven
                        through this round barrel hub. Advantages                                propellers
                        of this type of propeller include good planing
  performance (“hole shot” in propeller language), especially on
  boats where exhaust induced ventilation needs to be controlled         B) Inboard-outdrives using thru-transom exhaust.
  or eliminated. Additionally, all props with this or similar types of
  underwater exhaust create an effective exhaust noise reduction.        C.) Some outboards using above propeller exhaust. (Shown)


             OVER-HUB EXHAUST PROPELLERS                                        OVER/THRU-HUB EXHAUST PROPELLERS
                      Over-hub propellers eliminate the larger                                This type of design is normally used when
                      outer barrel, instead attaching the blades                              the desired degree of exhaust flooding at
                      directly to the small inner cavity surrounding                          takeoff is more than is readily obtainable
                      the propeller shaft. This results in massive                            with thru-hub exhaust, but less than that
                      exhaust flooding the prop during takeoff,                               inherent in the true over-hub design.
                      with characteristically high rpm’s for the                              Additionally, the superior strength of the
  first few seconds of planing. Typically used on applications           thru-hub design (shorter blade length means less leverage force
  designed for maximum speed.                                            on impacts) is retained.

                                                 TYPICAL PITCH LINES



                                                                                                          CUPPING
                                                                                                          HERE
                                                                                                          CHANGES
                                                                                                          RAKE




                                    CUPPING
                                    HERE
                                    CHANGES
                                    PITCH                                   TYPICAL RAKE LINES




                                              Propeller Cup
Cup assists in increasing the water gripping capability of the propeller, particularly on boats with elevated motor heights
and high trim angles. Cup can also provide additional bow lift when utilized on the rake line of the prop. Applying cup
to the trailing edge of the prop along the pitch line will increase the effective pitch of the propeller. A standard cup will
typically result in a decrease of 200 to 400 rpm’s. This usually means a decrease in pitch of 1 to 2 inches is required
to run a cupped propeller in place of an uncupped wheel.


 2
                            PITCH                                          CONSTANT PITCH VS. PROGRESSIVE PITCH
 PITCH is the inches of theoretical advance one revolution of
 the screw would produce.
                                                                                                                                 24”
 SLIP is the difference between actual and theoretical travel.                                                             21”
                                                                                                                     21”
                                                                                                               21”
                                                                                                         21”
                                                                                                   21”

                                                    E                                          E
                                                 LAD
                                                                                            LIN
                                                                                         CH
                                              FB


                                               L                                      PIT                CONSTANT PITCH
                                            AVE
                                           HO




                                                                                  N
                                                                                TO
                                         TR


                                                                              CU
                                        PAT




                                                                                                   (21” PITCH WITH 3” CUP SHOWN)
                                      AL
                                    UAL


                                   TIC
                                ACT


                                 RE
                               EO




                                                                                                                            24”
                             TH




                                                                                                                      21”
                                                                                                               20”
                                                                                                         19”
                                                                   Slip                            18”
                 1 Revolution = Inches of Actual Travel
                 1 Revolution = Inches of Theoretical Advance (Pitch)


                                                                                                          PROGRESSIVE PITCH
                                                                          (21” PITCH WITH 3” PROGRESSION AND 3” CUP SHOWN)




                                     Constant Pitch vs.
                                     Progressive Pitch
Constant pitch propellers have a constant pitch across the entire propeller high pressure face. Progressive
pitch propellers have a lower pitch at the leading edge which increases progressively across the blade
face. This type of propeller typically provides superior planing performance.



Blade Rake
Blade Rake represents the angle of attachment of the blade to the
hub of the propeller. This is not to be confused with the pitch, which
is a measure of the twist or screw progression. Higher rake normally
improves performance in ventilating or vavitating situations (high
engine elevations and high trim angles). Additionally, higher rake
can provide higher bow lift, which will frequently improve speed.
Low rake blades are typically used on lmotors with propellers
running fully submerged, typically carrying moderate to heavy
loads. The rake angle can either be straight or the average angle
of a parabolic curve.

                                                                                                                                       3
                                                   EXAMPLE:
                                       OFX4R17P-CLY200
              OFX ..................Blade style, i.e., this is a High Performance Offshore
                                  Lifter Series blade style for E Class motors (150-300HP)

              4 ........................Number of blades, i.e., this is a 4-blade propeller

              R........................Direction of blade rotation, i.e., this is a right-hand rotation
                                  propeller

              17 .....................Pitch of the propeller

              P ........................Finish (P for polished finish, S for satin finish)
              CLY200 ..........Hub style and motor fitment, i.e., this is a CushionLok
                                  hub system for a Yamaha V6 motor (See Hub Fitment Chart)

    Step 1:       Go to our photo gallery and find the available blade styles for your motor size,
                  i.e., A Class (9.9-15HP), E Class (150-300HP), etc.

    Step 2:       Choose the blade style that is your appropriate for your application from our photo
                  gallery by reading the descriptions and viewing the photographs, i.e., SWA, OFX,
                  etc.

    Step 3:       Choose the number of blades appropriate for your application, i.e., 3, 4, 5.

    Step 4:       Choose the rotation of the propeller, R for right-hand rotation, or L for left-hand
                  rotation (most single-engine applications are right-hand rotation motors).

    Step 5:       Choose the pitch that keeps the motor within the manufacturer’s recommended
                  operating range.

    Step 6:       Choose the finish you prefer on your stainless steel propeller, i.e., P for polished
                  finish, S for satin finish. The polished finish is shiny like chrome, while the satin
                  finish looks like a brushed metal finish. The polished finish is more corrosion resistant
                  than the satin finish.

    Step 7:       Choose the hub style appropriate for your motor application, i.e., YM90 (rubber
                  hub for Yamaha D Class – 60-140HP), CLM200 (CushionLok hub system for Mercury
                  E Class Motor – 150-300HP). (See Hub Fitment Guide on following page).

    If you have ANY questions, whatsoever, please do not hesitate to call our technical service line
    for assistance in choosing the correct propeller for your application.



6
                                  HUB FITMENT GUIDE
    Motor         Class   HP Range         Years          Hub System        Series   Kit Required
 Bombardier        A       9.9 - 15                       Rubber OEM        OM15        None
(also Evinrude)    B       20 - 30                        Rubber OEM        OM35        None
(also Johnson)     C      BF25 - 70       2 Stroke        Rubber OEM        OM50        None
                   D      BF50 - 130      2 Stroke        Rubber OEM        OM140       None
                                          2 Stroke       Square Universal   VT145        Yes
                                          4 Stroke        Rubber OEM        OM140       None
                                          4 Stroke       Square Universal   VT145        Yes
                   E      135 - 300     OT Gearcase      Square Universal   MS175        Yes
                                                         HD CushionLok      CL150      KT-CLJ
                          135 - 300    Sealed Gearcase    Rubber OEM        OM250       None
                                                         Rubber Universal   UN200    KT-UN200-0
                                                         Square Universal   MS275        Yes
                                                         HD CushionLok      CL200      KT-CLJ
   Honda           A       9.9 - 20                       Rubber OEM        YM15        None
                   B       25 - 30                        Rubber OEM         H25        None
                   C       35 - 50                        Rubber OEM        YS50        None
                   D       75 - 130                       Rubber OEM        H115        None
                                                         Square Universal   MS175        Yes
                   E      135 & Up      OT Gearcase      Square Universal   MS175        Yes
                                                         HD CushionLok      CL150      KT-CLH
                                       Sealed Gearcase   Square Universal   MS275        Yes
                                                         HD CushionLok      CL200        Yes
   Mercury         A       9.9 - 15                       Rubber OEM         M10        None
                   B         25                           Rubber OEM         M25        None
                   C      BF25 - 70                       Rubber OEM         M70        None
                   D      BF50 - 125                      Rubber OEM        M135        None
                                                         Square Universal   VT145        Yes
                   E      135 - 250     OT Gearcase       Rubber OEM        UN150    KT-UN150-MY
                                                         Square Universal   MS175        Yes
                                        OT Gearcase      HD CushionLok      CL150      KT-CLM
                          135 - 250    Sealed Gearcase    Rubber OEM        UN200    KT-UN200-MY
                                                         Square Universal   MS275        Yes
                                                         HD CushionLok      CL200      KT-CLM
                   F       Bravo 2                        Rubber OEM        M400        None
                                                         HD CushionLok      CL400     KT-CL400
   Suzuki          A       9.9 - 15                       Rubber OEM        SZ15        None
                   B       20 - 30                        Rubber OEM        SZ30        None
                   C       35 - 50                        Rubber OEM        YS50        None
                   D       70 - 140       2 Stroke        Rubber OEM        SZ140       None
                                                         Square Universal   VT145        Yes
                           70-140         4 Stroke        Rubber OEM        SF115       None
                                                         Square Universal   VT145        Yes
                   E       150-250      OT Gearcase      Square Universal   MS175        Yes
                                                         HD CushionLok      CL150      KT-CLS




                                                                                                7
                                         HUB FITMENT GUIDE
                                   150-250              Sealed Gearcase             Rubber OEM                 SZ200      None
                                                                                  Square Universal             MS275       Yes
                                                                                   HD CushionLok               CL200     KT-CLS
                                   150-250              Sealed Gearcase             Rubber OEM                 SZ200      None
                                                                                  Square Universal             MS275       Yes
                                                                                   HD CushionLok               CL200     KT-CLS
Tohatsu/Nissan            A         9.9-18                                          Rubber OEM                 TN15       None
                          B         20-30                                           Rubber OEM                 TN30       None
                          C         35-50                                                Rubber                TN40       None
                                                                                  Rubber Universal             YS50     UN50T kit
                          D         70-140                                          Rubber OEM                 TN90       None
                                                                                  Square Universal             VT145       Yes
    Volvo                 E        SX Class                                         Rubber OEM                 VO250      None
                                                                                  Square Universal             MS275       Yes
                                                                                   HD CushionLok               CL200     KT-CLV
    Yamaha                A         9.9-15                                          Rubber OEM                 YM15       None
                          B         20-30                                           Rubber OEM                 YM30       None
                          C        BF25-70                                          Rubber OEM                 YS50       None
                          D        BF50-130                                         Rubber OEM                 YM90       None
                                                                                  Square Universal             VT145       Yes
                          E        135 - 300                OT Gearcase             Rubber OEM                 UN150   KT-UN150-MY
                                                                                  Square Universal             MS175       Yes
                                                                                   HD CushionLok               CL150     KT-CLY
                                   135 - 300            Sealed Gearcase             Rubber OEM                 YM200      None
                                                                                  Rubber Universal             UN200   KT-UN200-MY
                                                                                  Square Universal             MS275       Yes
                                                                                   HD CushionLok               CL200     KT-CLY




             1   CL-Y                                                                                4   CL-M
             2   CL-H                                                                                5   CL-V *19-SPLINE
             3   CL-S          1               2        3           4         5      6
                                                                                                     6   CL-J *15-SPLINE




                      1              2                  3                 4              5                 6
                 Yamaha       Honda                Suzuki         Mercury         Volvo           Johnson


8
A CLASS MOTORS — 9.9-15HP
SRT3 – 9.5” DIAMETER, AVAILABLE IN 9”-13” PITCH,
3 BLADES, RIGHT HAND ROTATION, MODERATE RAKE,
MORE BLADE SURFACE AREA THAN SWA BLADESTYLE,
BETTER FOR HIGHER HORSEPOWER APPLICATIONS
SRT4 AVAILABLE CALL FOR DETAILS


SWA3 – 9.25” DIAMETER, AVAILABLE IN 9”-11” PITCH,                SRT3
3 BLADES, RIGHT HAND ROTATION, ALL PURPOSE, SEMI-
WEEDLESS, EASIEST TO TURN, DOES NOT LOAD MOTOR
AS READILY AS SRT BLADESTYLE

                                                          SWA3
SWA4 – 9.25” DIAMETER, AVAILABLE IN 9”-11” PITCH,
4 BLADES, RIGHT HAND ROTATION, ALL PURPOSE, SEMI-
WEEDLESS, OFFERS BETTER STERNLIFT THAN 3 BLADE
VERSION, BETTER CORNERING


B CLASS MOTORS — 20-35HP                                         SWA4

ILB3 – 10” DIAMETER, AVAILABLE IN 11” AND 13” PITCH,
3 BLADE, RIGHT HAND ROTATION, NO CUP, GOOD FOR
SUBMERGED APPLICATIONS, WILL NOT WORK PROPERLY
IN VENTILATING CONDITIONS, XTREME VALUE SERIES


REB3 – 10.25” DIAMETER, AVAILABLE IN 12”-17” PITCH,
3 BLADES, RIGHT HAND ROTATION, FACTORY EQUIVALET          ILB3
TO MERCURY BLACK MAX, 15 DEGREES RAKE, CUPPED,
EXCELLENT ALL PURPOSE PROP FOR SUZUKI 20-35HP
FAMILY

                                                                 REB3
SLC3 – 10.25” DIAMETER, AVAILABLE IN 11” AND 13” PITCH,
3 BLADE, RIGHT HAND ROTATION, NO CUP, GOOD FOR
SUBMERGED APPLICATIONS, WILL NOT WORK PROPERLY
IN VENTILATING CONDITIONS, XTREME VALUE SERIES


SLR3 – 10.25” DIAMETER, AVAILABLE IN 12”-14” PITCH,       SLC3
3 BLADES, RIGHT HAND ROTATION, LOW RAKE OEM
EQUIVALENT, A REPLACEMENT PROP FOR THE SUZUKI
20-30HP, LOW RAKE STYLE SO NO TRIM TAB ADJUSTMENT
IS REQUIRED (CUPPED).
                                                                 SLR3


                                                                        9
B CLASS MOTORS (cont.)
SRA3 – 10” DIAMETER, AVAILABLE IN 11”-15” PITCH, 3
BLADES, RIGHT HAND ROTATION, ALL PURPOSE, 20
DEGREES AFT RAKE, CUPPED, GOOD CAVITATION
CONTROL, AN EXCELLENT ALL AROUND PERFORMER


SRA4 - 10” DIAMETER, AVAILABLE IN 11”-13” PITCH, 4
BLADES, RIGHT HAND ROTATION, ALL PURPOSE, SAME                      SRA3
AS ABOVE, WILL MAINTAIN BITE AT HIGHER TRANSOM
ELEVATIONS, SUPERIOR CORNERING, BETTER
ACCELERATION AND STERNLIFT

                                                             SRA4
SRN3 – 10” DIAMETER, AVAILABLE IN 10”-11” PITCH,
3 BLADES, RIGHT HAND ROTATION, BEST ALL PURPOSE,
NO CUP, BEST FOR FULLY SUBMERGED APPLICATIONS
WHERE CAVITATION IS NOT AN ISSUE


SRS3 – 9.25” DIAMETER, AVAILABLE IN 12”-13” PITCH,
                                                                    SRN3
3 BLADES, RIGHT HAND ROTATION, BEST ALL PURPOSE,
SMALL DIAMETER, NO CUP, GOOD FOR YAMAHA AND
HONDA 25HP FAMILY WHEN RUNNING SUBMERGED


TLR3 - 10” DIAMETER, AVAILABLE IN 10”-14” PITCH, 3 BLADES,
RIGHT HAND ROTATION, LOW RAKE FACTORY EQUIVALENT, A          SRS3
REPLACEMENT PROP FOR THE TOHATSU/NISSAN FACTORY
ALUMINUM OR STAINLESS, TAKES ALL FACTORY HARDWARE,
LOW RAKE, SO NO TRIM TAB ADJUSTMENT IS REQUIRED,
CUPPED (IF REPLACING ALUMINUM PROP, DROP PITCH 1”-2”
TO MAINTAIN RPM PARITY)
                                                                    TLR3
C CLASS MOTORS — 40-70HP
ILC3 – 11.25” DIAMETER, AVAILABLE IN 11”-14” PITCH,
3 BLADE, RIGHT HAND ROTATION, NO CUP, GOOD FOR
SUBMERGED APPLICATIONS, WILL NOT WORK PROPERLY
IN VENTILATING CONDITIONS, XTREME VALUE SERIES
                                                             ILC3

NREB3 – DIAMETER VARIES WITH PITCH FROM 10.375”-
10.5”, AVAILABLE IN 11”-15” PITCH, RIGHT HAND ROTATION,
A LARGER DIAMETER VERSION OF REB TO HANDLE
HIGHER HORSEPOWER OR HEAVIER LOADS                                  NREB3


    10
C CLASS MOTORS (cont.)
OLC3 – 11.75”-12.25” DIAMETER, AVAILABLE IN 13”, 15”,
17” PITCH, 3 BLADE, RIGHT HAND ROTATION, NO CUP,
GOOD FOR SUBMERGED APPLICATIONS, WILL NOT WORK
PROPERLY IN VENTILATING CONDITIONS, EXTREME
VALUE SERIES


REB3 – 10.25” DIAMETER, AVAILABLE IN 10”-17” PITCH,            OLC3
3 BLADES, RIGHT HAND ROTATION, FACTORY EQUIVALENT
TO MERCURY BLACK MAX, 15 DEGREES RAKE, CUPPED,
EXCELLENT ALL PURPOSE PROP


REB4 – 10.25” DIAMETER, AVAILABLE IN 12”-14” PITCH,     REB3
4 BLADES, RIGHT HAND ROTATION, 15 DEGREES RAKE,
CUPPED, EXCELLENT FOR VENTILATING APPLICATIONS


SCA3 - 11.00” DIAMETER, AVAILABLE IN 13”-15” PITCH,
3 BLADES, RIGHT HAND ROTATION, A LARGER DIAMETER
VERSION OF SCB TO HANDLE HIGHER HORSEPOWER
OR HEAVIER LOADS


SCB3 - 10.375” DIAMETER, AVAILABLE IN 12”-17” PITCH,
3 BLADES, RIGHT HAND ROTATION, SPEED PROPELLER,         SCA3
EXCELLENT STERNLIFT, GREAT PERFORMANCE, GOOD
ON INFLATABLES AND FLAT BOTTOM HULLS


SCB4 – 10.375” DIAMETER, AVAILABLE IN 12”-17” PITCH,
                                                               SCB3
4 BLADES, RIGHT HAND ROTATION, EXCELLENT CORNERING
AND HOLE SHOT, TERRIFIC MID RANGE, A PREFERRED
CHOICE ON INFLATABLES AND FLAT BOTTOMS


SCH3 – 11.25” DIAMETER, AVAILABLE IN 12”-14” PITCHES,
3 BLADES, RIGHT HAND ROTATION, A LOW RAKE,              SCB4
UNCUPPED, SWEPT SEMICLEAVER, GOOD STERNLIFT,
EXCEPTIONALLY EASY TO TURN, AN EXCELLENT PROP
IF RUN SUBMERGED AND HIGH TRIM ANGLE IS NOT
NEEDED. A FACTORY REPLACEMENT FOR THE HONDA
35-50 HP ALUMINUM


                                                               SCH3


                                                                      11
C CLASS MOTORS (cont.)
SRC3 - 10.75” DIAMETER, AVAILABLE IN 11”-12” PITCH,
3 BLADES, RIGHT HAND ROTATION, AN ALL AROUND LOW
PITCH 3 BLADE


SRD3 - 11.25” DIAMETER, AVAILABLE IN 11”-17” PITCH,
3 BLADES, RIGHT HAND ROTATION, BEST ALL-PURPOSE
PROP, 20 DEGREES RAKE, EXCELLENT ALL AROUND PROP              SRC3


SRD4 – 11.25” DIAMETER – AVAILABLE IN 12”-17” PITCH,   SRD3
4 BLADES, RIGHT HAND ROTATION, AN ALL AROUND 4
BLADE FOR 50-60HP MOTORS


SRG3 – DIAMETER VARIES WITH PITCH FROM 11.75” TO
12.50”, AVAILABLE IN 11”-17” PITCH, 3 BLADES, RIGHT
HAND ROTATION, SST EQUIVALENT, 20 DEGREES RAKE,
EXCELLENT ALL AROUND PROP                                     SRD4


SWC3 – 10.75” DIAMETER, AVAILABLE IN 12”-14,” PITCH,
3 BLADES, RIGHT HAND ROTATION, REALLY EXCEPTIONAL      SRG3
GRIP, WILL CONTROL SLIPPAGE WITH TIGHT RADIUS,
CUP, GOOD ON PONTOONS AND SINGLE ENGINE
CATAMARANS


SWC4 – 10.75” DIAMETER, AVAILABLE IN 12”-14” PITCH,
4 BLADES, RIGHT HAND ROTATION, SAME AS 3 BLADE
                                                              SWC3
BUT EVEN MORE RESISTANCE TO SLIPPAGE, EXCELLENT
FOR TUNNEL, OR CAVITATING APPLICATIONS

                                                       SWC4
WBA3 – 12.00” DIAMETER, AVAILABLE IN 9”-13” PITCH,
3 BLADES, RIGHT HAND ROTATION, THRUSTER SERIES,
LOAD PUSHING, WIDE BLADE, GREAT FOR WORKBOATS
AND PONTOON BOATS


WBG3 – 11.62” DIAMETER, AVAILABLE IN 9”-11” PITCH,
3 BLADES, RIGHT HAND ROTATION, THRUSTER SERIES                WBA3
LOAD PUSHING PROPS, WIDE BLADE, FOR WORKBOAT
AND PONTOON BOATS

                                                       WBG3


  12
D CLASS MOTORS — V-4
CFF4 – 14” DIAMETER, AVAILABLE IN 17”-21” PITCH,
COASTAL FLATS PROPELLER, HIGH ASPECT RATIO BLADE
GEOMETRY, EXCELLENT GRIP, HOLESHOT AND MOTOR
ELEVATION CAPABILITY FOR COASTAL SHALLOWS AND
FLATS WORK


ELD3 – DIAMETER CHANGES WITH PITCH, AVAILABLE IN                  CFF4
15”, 17”, 19”, 21” PITCH, 3 BLADES, RIGHT HAND ROTATION,
CUPPED, EXCELLENT PERFORMANCE PROP WITH GOOD
LIFT, XTREME VALUE SERIES
                                                           ELD3

NRS3 – 13.25” DIAMETER, AVAILABLE IN 14”-21” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, 25 DEGREE
RAKE, GOOD LIFT, EXTENSIVE CUP, A LITTLE MORE
DIFFICULT TO TURN THAN MANY INLINE PROPS,
TYPICALLY DROP 1” OF PITCH, SIMILAR TO TURBO
                                                                  NRS3

NRS4 - NEW 13.25” DIAMETER, AVAILABLE IN 14”-21” PITCH,
4 BLADES, RIGHT AND LEFT HAND ROTATION, FLATS ‘N
BAY PROP, SIMILAR TO TURBO 4                               NRS4


MQF3 – DIAMETER VARIES WITH PITCH FROM 13.00” TO
13.75”, AVAILABLE IN 13” & 15” PITCH, 3 BLADES, RIGHT
HAND ROTATION, OEM EQUIVALENT STERN LIFTING PROP,
EQUIVALENT TO BLACK MAX, AN EXCELLENT EASY TO
TURN WHEEL                                                        MQF3


OSN3 – 14.00” DIAMETER, AVAILABLE IN 15”-21” PITCH,
3 BLADES, RIGHT HAND ROTATION, “NEW” STYLE, SWEPT
BLADE, WITH NARROW TIP, EXCELLENT FOR OFFSHORE             OSN3
USE, FACTORY EQUIVALENT FOR OMC SST OR
ALUMINUM

OSN4 – 14.00” DIAMETER, AVAILABLE IN 15”-21” PITCH,
4 BLADES, RIGHT HAND ROTATION, MORE GRIP AND LIFT
THAN OSN3                                                         OSN4
OST3 – DIAMETER VARIES WITH PITCH, AVAILABLE IN
15”-21” PITCH, 3 BLADES, RIGHT HAND ROTATION,
MODERATE RAKE FACTORY EQUIVALENT FOR OMC SST
OR ALUMINUM SERIES,                                        OST3


                                                                         13
D CLASS MOTORS (cont.)
PFO4 – 14.00” DIAMETER, AVAILABLE IN 16”-20” PITCH,
4 BLADES, RIGHT HAND ROTATION, LARGE DIAMETER
VERSION OF PFS4


PFS4 – 13.00” DIAMETER, AVAILABLE IN 12”-17” PITCH,
4 BLADES, RIGHT HAND ROTATION, FLATS SUPERCUP
FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4                PFO4
INCHES), TRIPLE CUP


PTR3 – 13.50” DIAMETER, AVAILABLE IN 15”-23” PITCH,   PFS4
3 BLADES, RIGHT AND LEFT HAND ROTATION, HIGH RAKE,
EXCELLENT LIFT


PTR4 – 13.50” DIAMETER, AVAILABLE IN 15”-23” PITCH,
4 BLADES, RIGHT AND LEFT ROTATION, HEAVY CUPPED,
EXCELLENT FOR VENTILATING APPLICATIONS
                                                             PTR3
RAF3 – 13.25” DIAMETER, AVAILABLE IN 14”-21” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, 25 DEGREE
RAKE, GOOD LIFT, EXTENSIVE CUP, A LITTLE MORE
                                                      PTR4
DIFFICULT TO TURN THAN MANY INLINE PROPS,
TYPICALLY DROP 1” OF PITCH, TERMED THE R-SERIES,
SIMILAR TO RAPTURE


RED3 – 13.25” DIAMETER, AVAILABLE IN 14”-21” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, BEST ALL
PURPOSE PROPS, MODERATE RAKE AND CUP, SIMILAR                RAF3
TO RAPTURE, BALLISTIC, STILETTO,

RXB4 – 13.25” DIAMETER, AVAILABLE IN 12”-21” PITCH,
4 BLADES, RIGHT AND LEFT HAND ROTATION,               RED3
ACCELERATOR SERIES, HOLE SHOT HANDLING PROPS,
OUR BEST ALL AROUND 4 BLADE, MODERATE RAKE &
CUP, HANDLES WELL, TYPICALLY BEST IF PORTED 5/16”
(NO CHARGE)


SBP3 – 12.75” DIAMETER, AVAILABLE IN 14”-19” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, SMALL                RXB4
BLADE SURFACE AREA FOR LOW CUBIC INCH “BIG FOOT”
APPLICATIONS WHERE FULL SURFACE AREA PROPS
RESULT IN LOW RPM’S
                                                      SBP3


  14
D CLASS MOTORS (cont.)
SCD3 – 13.00” DIAMETER, AVAILABLE IN 15”-19” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION,
STERNLIFTING SEMICLEAVER, EASY TO RUN, SIMILAR
TO FACTORY YAMAHA SEMICLEAVER


SCD4 – 13.00” DIAMETER, AVAILABLE IN 15”-19” PITCH,
4 BLADES, RIGHT AND LEFT HAND ROTATION, OPTIMUM              SCD3
GRIP AND STERN LIFT, YET EASY TO TURN


SWW3 – 13.50” DIAMETER, AVAILABLE IN 14”-16” PITCH,
3 BLADES, RIGHT HAND ROTATION, HARDWALL “L” CUP       SCD4
FOR SUPERIOR GRIP ON WATER, LOW RAKE


SWW4 – 13.50” DIAMETER, AVAILABLE IN 14”-16” PITCH,
4 BLADES, RIGHT HAND ROTATION, 4 BLADE VERSION
OF SWW3, OFFERS MORE SURFACE AREA, TRACTION                  SWW3
AND STERNLIFT


TSO3 - NEW 13.375” DIAMETER, A VERY FAST MIDSIZE
PROPELLER IN NON VENTILATING APPLICATIONS. EASY
                                                      SWW4
TO TURN COMPARED TO MOST HIGH PERFORMANCE
WHEEL, EXCELLENT FOR ALUMINUM BOATS


WBH3 – 14.00” DIAMETER, AVAILABLE IN 8”-14” PITCH,
3 BLADES, RIGHT HAND ROTATION, THRUSTER SERIES               TSO3
LOAD PUSHING PROPS, WIDE BLADE, FOR PONTOON
AND WORKBOATS


XSB4 - 12.75” DIAMETER, AVAILABLE IN 13”-21” PITCH,
                                                      WBH3
RIGHT AND LEFT HAND ROTATION, FOR 4 STROKES AND
OTHER APPLICATIONS HAVING DIFFICULTY ACHIEVING
TARGET RPMS



                                                             XSB4




                                                                    15
E CLASS MOTORS — V-6
CFS4 – 15” DIAMETER, AVAILABLE IN 17”-23”
PITCHCOASTAL FLATS PROP, HIGH ASPECT RATIO BLADE
GEOMETRY, EXCELLENT GRIP, HOLESHOT AND MOTOR
ELEVATION CAPABILITY FOR COASTAL SHALLOWS AND
FLATS WORK

ELE3 – DIAMETER VARIES WITH PITCH, AVAILABLE IN 15”,
17”, 19”, 21” PITCH, 3 BLADES, RIGHT HAND ROTATION,            CFS4
EXCELLENT ALL AROUND PROP, DIAMETER VARIES PER
PITCH

ELE4 – DIAMETER VARIES PER PITCH, 4 BLADES, RIGHT-
                                                        ELE3
HAND ROTATION, GREATER GRIP, LIFT AND PULLING
POWER THAN ELE3 - XTREME VALUE SERIES

LFS3 - 16” DIAMETER, CALL FOR PITCH AVAILABILITY, 3
BLADES, RIGHT AND LEFT - HAND ROTATION, MODERATE
RAKE AND FULL TIP CUP, EXCELLENT LIFT AND GRIP,
FACTORY EQUIVALENT FOR SUZUKI 16” DIAMETER,
PROPELLER WITH BETTER CAVITATION RESISTANCE                    LFS3

LFS4- 16” DIAMETER, CALL FOR PITCH AVAILABILITY, 4
BLADES, RIGHT AND LEFT- HAND ROTATION, BETTER
GRIP AND LIFT THAN LFS3, 4-BLADE EQUIVALENT FOR         LFS4
SUZUKI 16” DIAMETER PROPELLER

MQS3 – DIAMETER VARIES WITH PITCH, AVAILABLE IN
15”-21” PITCH, 3 BLADES, RIGHT AND LEFT HAND
ROTATION, LOW RAKE, EASY TO TURN, STERNLIFTING,
FACTORY EQUIVALENT FOR MERCURY BLACK MAX

MQS4 - DIAMETER VARIES WITH PITCH, AVAILABLE IN                MQS4
15”-21” PITCH, 4 BLADES, RIGHT AND LEFT HAND
ROTATION, LOW RAKE, EXCELLENT STERNLIFT, GREAT
FOR SKI BOATS AS WELL AS HEAVY STERN-DRIVE              MQS3
CRUISER

OFS3 – 15.25” DIAMETER, AVAILABLE IN 14”-28” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, MODERATE
HIGH RAKE WITH FULL TIP CUP, EXCELLENT LIFT, MOST
COMPARABLE TO MERCURY MIRAGE

OFS4 – 15.25” DIAMETER, AVAILABLE IN 15”-27” PITCH, 4
BLADES, RIGHT AND LEFT HAND ROTATION, MODERATE                 OFS4
HIGH RAKE WITH FULL TIP, GOOD FOR SINGLE ENGINE
AND TWIN ENGINE OFFSHORE APPLICATIONS AND
STERNDRIVES                                             OFS3



  16
E CLASS MOTORS (cont.)
OFS5 - 15.25” DIAMETER, 5 BLADE OFFSHORE SERIES,
CUSTOM PROP FOR HIGHER BLADE SURFACE AREA AND
GRIP, SPECIAL ORDER-ALLOW 3-4 WEEKS FOR DELIVERY

OFX3 – 15.25” DIAMETER, AVAILABLE IN 14”-28” PITCH,
3 BLADES, RIGHT AND LEFT HAND, ROTATION,
MODERATELY HIGH RAKE, HIGH ASPECT RATIO X-CUT
GEOMETRY, AGGRESSIVE CUPPING FOREXCELLENT                    OFS5
LIFT AND GRIP CHARACTERISTICS, USED ON MANY HIGH
PERFORMANCE FLATS, BAYS, AND MUSCLE BOATS             OFX3

OFX4 – 15.25” DIAMETER, AVAILABLE IN 14”-28” PITCH4
BLADES, RIGHT AND LEFT HAND ROTATION, MODERATELY
HIGH RAKE, HIGH ASPECT RATIO X-CUT GEOMETRY,
AGGRESSIVE CUPPING, BETTER GRIP AND MOTOR
ELEVATION CAPABILITY THAN OFX3, USED ON MANY
HIGH PERFORMANCE FLATS, BAYS, AND MUSCLE BOATS,
ESPECIALY WHERE GRIP IS AT A PREMIUM

OFX5 – 15.25” DIAMETER, AVAILABLE IN 15”-28” PITCH,          OFX4
5 BLADES, RIGHT HAND ROTATION, MODERATELY HIGH
RAKE, HIGH ASPECT RATIO X-CUT GEOMETRY,
AGGRESSIVE CUPPING FOR EXCELLENT LIFT AND GRIP        OFX5
CHARACTERISTICS, SPECIAL ORDER-ALLOW 3-4 WEEKS
FOR DELIVERY

OSS3 – DIAMETER VARIES WITH PITCH, AVAILABLE IN
15”-21” PITCH, 3 BLADES, RIGHT HAND ROTATION,
FACTORY REPLACEMENT

PFL4 - 17” PITCH, 4 BLADE, RIGHT HAND ROTATION,
MODERATE RAKE, TRIPLE CUP FOR FLATS BOATS WITH               OSS3
EXTREME MOTOR HEIGHTS
                                                      PFL4
PTC3 – 14.25” DIAMETER, AVAILABLE IN 14”-23” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, HIGH RAKE
WITH HARDWALL “L” CUP, EXCELLENT AT MAINTAINING
GRIP ON WATER

PTC4 – 14.25” DIAMETER, AVAILABLE IN
14”-23” PITCH, 4 BLADES, RIGHT AND LEFT ROTATION,
HIGH RAKE WITHHARDWALL “L” CUP, EXCELLENT GRIP,
GOOD FOR TWIN ENGINES IN OFFSHORE APPLICATIONS
                                                             PTC3

                                                      PTC4


                                                                    17
E CLASS MOTORS (cont.)
RAS3 – 14.25” DIAMETER, AVAILABLE IN 15”, 17”, 19”, 21”,
23”, 3 BLADES, RIGHT AND LEFT-HAND ROTATION, HIGH
PERFORMANCE GEOMETRY, TERMED THE R-SERIES,
SIMILAR TO RAPTURE

SCE3 – 14” DIAMETER, AVAILABLE IN 15”-19” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, STER-                     RAS3
LIFTING, EASY TO TURN SEMI-CLEAVER GEOMETRY,
SIMILAR TO YAMAHA SEMI-CLEAVER

SCE4 – 14” DIAMETER, AVAILABLE IN 15”-19” PITCH,
                                                           SCE3
4 BLADES, RIGHT AND LEFT HAND ROTATION, STERN-
LIFTING, IMPROVED STERNLIFT AND IMPROVED GRIP
OVER SCE3 , SIMILAR TO YAMAHA SEMI-CLEAVER

SFS3 - 14.25” DIAMETER, AVAILABLE IN 17”-23” PITCH,
3 BLADES, RIGHT HAND ROTATION, MODERATE RAKE
AND FULL TIP CUP, EXCELLENT ALL-AROUND PROP                       SCE4
FOR SKI BOATS AND SMALLER OFFSHORES

SFS4 - 14.25” DIAMETER, AVAILABLE IN 17”-23” PITCH,
4 BLADES, RIGHT HAND ROTATION, MORE GRIP AND LIFT          SFS3
THAN SFS3

TRO4 – 13.75” DIAMETER, AVAILABLE IN 17”-28” PITCH,
4 BLADES, RIGHT HAND ROTATION, HIGH RAKE WITH
SHARP RADIUS CUP, EXCELLENT LIFT, AN EXCELLENT
BASS BOAT PRO, MOST SIMILAR TO MERCURY TROPHY,
SMALL HUB, MAY BE RUN OVER AND THRU EXHAUST OR                    SFS4
SEALED EXHAUST WITH EXHAUST RING

VMS3 – 14.625” DIAMETER, AVAILABLE IN 23”, 25”, & 27”      TRO4
PITCH, 3 BLADES, RIGHT HAND ROTATION, HIGH RAKE
WITH MODERATE CUP, EXCELLENT BOW LIFT, A
EXCELLENT BASS BOAT PROP ON MANY APPLICATIONS,
TYPICALLY RUNS BEST AT HIGHER MOTOR ELEVATION,

VX3 – 15.25” DIAMETER, AVAILABLE IN 23”, 25”, & 27”
PITCH, 3 BLADES, RIGHT HAND ROTATION, HIGH RAKE                   VMS3
WITH MODERATE CUP, EXCELLENT BOW LIFT, AN
EXCELLENT BASS & BAY BOAT PROP ON MANY
APPLICATIONS, TYPICALLY RUNS BEST AT HIGHER MOTOR
ELEVATION, MOST SIMILAR TO YAMAHA VX-MAX
                                                           VMX3


  18
E CLASS MOTORS (cont.)
WBB3 – 15.5” DIAMETER, AVAILABLE IN 11”-14” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, FOR
PUSHING APPLICATIONS, PONTOON AND WORKBOATS

WBV3 – 16.00” DIAMETER, AVAILABLE IN 14”-16” PITCH,
3 BLADES, RIGHT HAND ROTATION, PONTOON AND
WORKBOATS
                                                                            WBB3


F CLASS MOTORS — BRAVO II                               WBV3

/ KONRAD DIESELS
BRA3 – 18.5” DIAMETER, AVAILABLE IN 15”-24” PITCH,
3 BLADES, RIGHT AND LEFT HAND ROTATION, CUPPED
WITH HARDWALL “L” CUP, A VERY EFFICIENT, HIGH
TRACTION WHEEL
                                                                            BRA3
BRA4 – 18.5” DIAMETER, AVAILABLE IN 15”-24” PITCH,
4 BLADES, RIGHT AND LEFT HAND ROTATION, SAME AS
ABOVE, BUT WITH 4 BLADES, REALLY SHINES ON HEAVIER
                                                        BRA4
CRAFT WITH SUPERIOR ACCELERATION AND MIDRANGE

BRA5 – 18.5” DIAMETER, AVAILABLE IN 15”-24” PITCH,
5 BLADES, RIGHT AND LEFT HAND ROTATION, SAME AS
ABOVE, BUT WITH 5 BLADES, USED ON HEAVIEST CRAFT
IN NEED OF BLADE SURFACE AREA

BRS3 - 17.25” DIAMETER AVAILABLE IN 15”-24” PITCH,                          BRA5
3 BLADES, RIGHT HAND ROTATION, SMALL DIAMETER
BRAVO II PROP

BRS4 - 17.25” DIAMETER AVAILABLE IN 15”-24” PITCH,      BRS3
4 BLADES, RIGHT AND LEFT HAND ROTATION, SAME AS
ABOVE, BUT WITH 4 BLADES FOR IMPROVED GRIP




                                                                            BRS4

                           CUSHIONLOK® HUB SYSTEM AVAILABLE
 FOR EXTREME DUTY APPLICATIONS, WHERE HUB FAILURE IS A CONCERN, ALL BRAVO II PROPELLERS
 ARE AVAILABLE IN THE PATENTED CUSHIONLOK® HUB SYSTEM FOR AN ADDITIONAL FEE. (SEE PAGE
 4 FOR DETAILS)


                                                                                    19
                                                             HONDA*
STANDARD FINISH IS POLISH                                        RIGHT HAND               LEFT HAND
Motor & Model       Year                Blds/Dia/Pitch/Cup        PART NO.       UPC#      PART NO.      UPC#
“A CLASS” SMALL PORTABLES 9.9-20HP 2.75” GEARCASE
                                 YM15   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
9.9-20              86 Thru             3BL 9.25 x 9P No        SWA3R9-YM15     291739
Flow thru Exhaust                       3BL 9.25 x 10P No       SWA3R10-YM15    291740
                                        B4-ST
                                        B6-PL
                                                                                                                SWA3
“B CLASS” LARGE PORTABLES 25-30HP 3” GEARCASE
                                  H25   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
25HP                94 Thru             3BL 10.00 x 10P No      SRN3R10-H25     052040
30HP                96 Thru             3BL 10.00 x 11P No      SRN3R11-H25     052041
                                        B5A-ST
                                        B9-PL
                                                                                                                SRN3

                                        3BL 9.25 x 12P No        SRS3R12-H25    051242
                                        3BL 9.25 x 13P No        SRS3R13-H25    051243
                                        B5A-ST
                                        B9-PL

                                                                                                                SRS3
“C CLASS” MID SIZE 35-50HP 3.5” GEARCASE
35-45-50HP                       YS50   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
                                        3BL 12.25 x 9P No      WBA3R9-YS50      311339
                                        B11-ST
                                        B14-PL

                                                                                                                WBA3
                                        MULTI-USE SERIES BEST ALL PURPOSE PROPS




                                   {
                                        3BL 11.25 x 11P C       SRD3R11-YS50    311041
                Best Value For          3BL 11.25 x 12P C       SRD3R12-YS50    311042
                  Standard              3BL 11.25 x 13P C       SRD3R13-YS50    311043
                 Applications           3BL 11.25 x 14P C       SRD3R14-YS50    311044
                                        3BL 11.25 x 15P C       SRD3R15-YS50    311045
                                        B8-ST                                                                   SRD3
                                        B10-PL

                                        LIGHT APPLICATIONS
                                        3BL 10.37 x 13P C       REB3R13-YS50    310543
                                        3BL 10.25 x 15P C       REB3R15-YS50    310545
                                        B8-ST
                                        B9-PL
                                                                                                                REB3
                                        SPEED PROPELLERS
                                        3BL 10.375 x 13P        SCB3R13-YS50    311843
                                        3BL 10.375 x 14P        SCB3R14-YS50    311844
                                        3BL 10.375 x 15P        SCB3R15-YS50    311845
                                        3BL 10.375 x 16P        SCB3R16-YS50    311846
                                        B11-ST
                                        B14-PL                                                                  SCB3




   20
                                            HONDA* (Continued)
STANDARD FINISH IS POLISH                                      RIGHT HAND                   LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup        PART NO.        UPC#         PART NO.       UPC#
“C CLASS” MID SIZE 35-50HP 3.5” GEARCASE - CONT.
35-45-50HP                     YS50   OEM EQUIVALENT - UNCUPPED SEMI-CLEAVER
                                      3BL 11.25 x 12P        SCH3R12-YS50    314042
                                      3BL 11.25 x 13P        SCH3R13-YS50    314043
                                      3BL 11.25 x 14P        SCH3R14-YS50    314044
                                      B11-ST
                                      B14-PL                                                                        SCH3

                                      FOUR BLADE ACCELERATOR
                              FOUR    4BL 10.00 x 13P      SCB4R13-YS50        311943
                             BLADE    4BL 10.00 x 15P      SCB4R15-YS50        311945
                                      B17-ST
                                      B19-PL
                                                                                                                    SCB4
“D CLASS” INTERMEDIATE 75-130HP 4.25” GEARCASE
75HP             1995 Thru     H115   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
90HP             1995 Thru            3BL 14.00 x 11P C     WBH3R11-H115      492241
130HP            1999 Thru            3BL 14.00 x 13P C     WBH3R13-H115      492243
                                      B17-ST
                                      B19-PL
                                                                                                                    WBH3
                                      VALUE LINE ALL-PURPOSE PROPS - SIMILAR TO RAPTURE,BALLISTIC, STILETTO




                                 {
                                      3BL 13.25 x 15P C      RED3R15-H115      490745    RED3L15-H115      490445
              Best Value For          3BL 13.25 x 17P C      RED3R17-H115      490747    RED3L17-H115      490447
                Standard              3BL 13.25 x 19P C      RED3R19-H115      490749    RED3L19-H115      490449
               Applications           3BL 13.25 x 21P C      RED3R21-H115      490751
                                      H11-ST
                                      H12-PL                                                                        RED3

                                      OEM EQUIVALENT STERNLIFTER - SIMILAR TO BLACK MAX
                                      3BL 13.75 x 13P C     MQF3R13-H115       492643
                                      3BL 13.75 x 15P C     MQF3R15-H115       492645
                                      B14-ST
                                      B16-PL
                                                                                                                    MQF3
                                      LIFTER SERIES BOWLIFTING PROPS - EQUIVALENT TO BALLISTIC XL, LASER
                                      3BL 13.50 x 18P C       PTR3R18-H115     492748
                                      3BL 13.50 x 20P C       PTR3R20-H115     492750
                                      3BL 13.50 x 22P C       PTR3R22-H115     492752
                                      3BL 13.50 x 24P C       PTR3R24-H115     492754
                                      B14-ST
                                      B16-PL                                                                        PTR3

                                      ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”) - 4 BLADE
                              FOUR    4BL 13.25 x 15P C     RXB4R15-H115    493645
                             BLADE    4BL 13.25 x 17P C     RXB4R17-H115    493647
                                      4BL 13.25 x 19P C     RXB4R19-H115    493649
                                      4BL 13.25 x 21P C     RXB4R21-H115    493651
                                      B19-ST
                                      B21-PL                                                                        RXB4




                                                                                                                       21
                                           HONDA* (Continued)
STANDARD FINISH IS POLISH                                    RIGHT HAND                  LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup       PART NO.        UPC#        PART NO.       UPC#
“D CLASS” INTERMEDIATE 75-130HP 4.25” GEARCASE - CONT.
75HP             1995 Thru H115      FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
90HP             1995 Thru FOUR      4BL 13.00 x 14P C     PFS4R14-H115    493244
130HP            1999 Thru BLADE     4BL 13.00 x 15P C     PFS4R15-H115    493245
                                     4BL 13.00 x 16P C     PFS4R16-H115    493246
                                     B19-ST
                                     B21-PL                                                                      PFS4

“E CLASS” 135HP & UP V6 4.75” GEARCASE
135HP              2002     CLH200   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
150HP              2002              3BL 15.50 x 11P C     WBB3R11-CLH200    111441    WBB3L11-CLH200  111841
200HP                                3BL 15.50 x 13P C     WBB3R13-CLH200    111443    WBB3L13-CLH200  111843
225HP                                B18-ST
                                     B20-PL
                                                                                                                 WBB3
                                     STANDARD USE AND OFFSHORE SERIES - 3 BLADE
                                     3BL 15.25 x 15P C    OFS3R15-CLH200     115145   OFS3L15-CLH200    115245
                                     3BL 15.25 x 17P C    OFS3R17-CLH200     115147   OFS3L17-CLH200    115247
                                     3BL 15.25 x 19P C    OFS3R19-CLH200     115149   OFS3L19-CLH200    115249
                                     3BL 15.25 x 21P C    OFS3R21-CLH200     115151   OFS3L21-CLH200    115251
                                     3BL 15.25 x 23P C    OFS3R23-CLH200     115153   OFS3L23-CLH200    115253
                                     3BL 15.25 x 25P C    OFS3R25-CLH200     115155   OFS3L25-CLH200    115255   OFS3
                                     3BL 15.25 x 27P C    OFS3R27-CLH200     115157   OFS3L27-CLH200    115257
                                     B21-ST
                                     B24-PL

                             FOUR    STANDARD USE AND OFFSHORE SERIES - 4 BLADE
                            BLADE    4BL 15.25 x 15P C    OFS4R15-CLH200     115345   OFS4L15-CLH200    115445
                                     4BL 15.25 x 17P C    OFS4R17-CLH200     115347   OFS4L17-CLH200    115447
                                     4BL 15.25 x 19P C    OFS4R19-CLH200     115349   OFS4L19-CLH200    115449
                                     4BL 15.25 x 21P C    OFS4R21-CLH200     115351   OFS4L21-CLH200    115451
                                     4BL 15.25 x 23P C    OFS4R23-CLH200     115353   OFS4L23-CLH200    115453   OFS4
                                     4BL 15.25 x 25P C    OFS4R25-CLH200     115355   OFS4L25-CLH200    115455
                                     4BL 15.25 x 27P C    OFS4R27-CLH200     115357   OFS4L27-CLH200    115457
                                     B27-ST
                                     B31-PL

                                     “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 3 BLADE
                                     3BL 14.25 x 17P C      SFS3R17-CLH200
                                     3BL 14.25 x 19P C      SFS3R19-CLH200
                                     3BL 14.25 x 21P C      SFS3R21-CLH200
                                     3BL 14.25 x 23P C      SFS3R23-CLH200
                                     B16-ST                                                                      SFS3
                                     B18-PL

                             FOUR    “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 4 BLADE
                            BLADE    4BL 14.25 x 17P C      SFS4R17-CLH200
                                     4BL 14.25 x 19P C      SFS4R19-CLH200
                                     4BL 14.25 x 21P C      SFS4R21-CLH200
                                     4BL 14.25 x 23P C      SFS4R23-CLH200
                                     B21-ST                                                                      SFS4
                                     B24-PL


   22
                                           HONDA* (Continued)
STANDARD FINISH IS POLISH                                        RIGHT HAND                      LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup           PART NO.          UPC#          PART NO.          UPC#
“E CLASS” 135HP & UP V6 4.75” GEARCASE
135HP              2002     CLH200   LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, STILETTO, BALLISTIC
150HP              2002              3BL 14.25 x 15P C      PTC3R15-CLH200     385645  PTC3L15-CLH200      384945
200HP                                3BL 14.25 x 17P C      PTC3R17-CLH200     385647  PTC3L17-CLH200      384947
225HP                                3BL 14.25 x 19P C      PTC3R19-CLH200     385649  PTC3L19-CLH200      384949
                                     3BL 14.25 x 21P C      PTC3R21-CLH200     385651  PTC3L21-CLH200      384951
                                     3BL 14.25 x 23P C      PTC3R23-CLH200     385653  PTC3L23-CLH200      384953
                                     B14-ST                                                                                PTC3
                                     B15-PL

                                     SEMI-CLEAVER STERNLIFTING PROPS - 3 BLADE
                                     3BL 14.00 x 15P C     SCE3R15-CLH200                     SCE3L15-CLH200
                                     3BL 14.00 x 17P C     SCE3R17-CLH200                     SCE3L17-CLH200
                                     3BL 14.00 x 19P C     SCE3R19-CLH200                     SCE3L19-CLH200
                                     B17-ST
                                     B19-PL
                                                                                                                           SCE3
                             FOUR    FOUR BLADE SEMI-CLEAVER STERNLIFTING PROPS - 4 BLADE
                            BLADE    4BL 14.00 x 15P C    SCE4R15-CLH200              SCE4L15-CLH200
                                     4BL 14.00 x 17P C    SCE4R17-CLH200              SCE4L17-CLH200
                                     4BL 14.00 x 19P C    SCE4R19-CLH200              SCE4L19-CLH200
                                     B36-ST
                                     B37-PL
                                                                                                                           SCE4
                                     HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 3 BLADE
                                     3BL 15.25 x 15P C   OFX3R15-CLH200               OFX3L15-CLH200
                                     3BL 15.25 x 17P C   OFX3R17-CLH200               OFX3L17-CLH200
                                     3BL 15.25 x 19P C   OFX3R19-CLH200               OFX3L19-CLH200
                                     3BL 15.25 x 21P C   OFX3R21-CLH200               OFX3L21-CLH200
                                     3BL 15.25 x 23P C   OFX3R23-CLH200               OFX3L23-CLH200
                                     3BL 15.25 x 25P C   OFX3R25-CLH200               OFX3L25-CLH200                       OFX3
                                     3BL 15.25 x 27P C   OFX3R27-CLH200               OFX3L27-CLH200
                                     B21-ST
                                     B24-PL

                             FOUR    ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”)
                            BLADE    - SIMILAR TO TROPHY - SMALL HUB
                                     4BL 13.75 x 17P C         TRO4R17-CLH150
                                     4BL 13.75 x 19P C         TRO4R19-CLH150
                                     4BL 13.75 x 21P C         TRO4R21-CLH150
                                     4BL 13.75 x 23P C         TRO4R23-CLH150 456153
                                     4BL 13.75 x 25P C         TRO4R25-CLH150 456155
                                     4BL 13.75 x 27P C         TRO4R27-CLH150 456157                                       TRO4
                                     B21-ST
                                     B24-PL

                                     HIGH PERFORMANCE BASS/BAY SERIES BOWLIFTING PROPS - SIMILAR TO YAMAHA VX-MAX
                                     3BL 15.25 x 23P C       VMX3R23-CLH200
                                     3BL 15.25 x 25P C       VMX3R25-CLH200
                                     3BL 15.25 x 27P C       VMX3R27-CLH200
                                     B21-ST
                                     B24-PL                                                                                VMX3


                                                                                                                              23
                                               HONDA* (Continued)
STANDARD FINISH IS POLISH                                        RIGHT HAND                 LEFT HAND
Motor & Model       Year                 Blds/Dia/Pitch/Cup       PART NO.        UPC#       PART NO.      UPC#
“E CLASS” V6 4.75” GEARCASE - CONT.
135HP                 2002      CLH200   HIGH PERFORMANCE OFFSHORE LIFTER SERIES
150HP                 2002       FOUR    4BL 15.25 x 15P C   OFX4R15-CLH200    557645     OFX4L15-CLH200   557745
200HP                           BLADE    4BL 15.25 x 17P C   OFX4R17-CLH200    557647     OFX4L17-CLH200   557747
225HP                                    4BL 15.25 x 19P C   OFX4R19-CLH200    557649     OFX4L19-CLH200   557749
                                         4BL 15.25 x 21P C   OFX4R21-CLH200    557651     OFX4L21-CLH200   557751
                                         4BL 15.25 x 23P C   OFX4R23-CLH200    557653     OFX4L23-CLH200   557753
                                         4BL 15.25 x 25P C   OFX4R25-CLH200    557655     OFX4L25-CLH200   557755   OFX4
                                         4BL 15.25 x 27P C   OFX4R27-CLH200    557657     OFX4L27-CLH200   557757
                                         B27-ST
                                         B31-PL


                                            MERCURY / MARINER*
STANDARD FINISH IS POLISH                                        RIGHT HAND                 LEFT HAND
Motor & Model       Year                 Blds/Dia/Pitch/Cup       PART NO.        UPC#       PART NO.      UPC#
“A CLASS” SMALL PORTABLES 9.9-15HP 2.75” GEARCASE
Merc.6-8-9.9-10-15 86Thru M10            MULTI-USE SERIES BEST ALL-PURPOSE PROPS - SEMI WEEDLESS
Mariner6-8-9.9-15 88Thru                 3BL 9.25 x 9P No         SWA3R9-M10     061739
INCLUDING 4 STROKE MOTORS                3BL 9.25 x 10P No       SWA3R10-M10     061740
                                         3BL 9.25 x 11P No       SWA3R11-M10     061741
Uses special heavy duty PowerTech!       B4A-ST
hub and thrust washer (included)         B5A-PL                                                                     SWA3

9.9-15 HP Mariner    84-87       YM15    MULTI-USE SERIES BEST ALL-PURPOSE PROPS - SEMI WEEDLESS
                                         3BL 9.25 x 9P No        SWA3R9-YM15     291739
                                         3BL 9.25 x 10P No       SWA3R10-YM15    291740
                                         3BL 9.25 x 11P No       SWA3R11-YM15    291741
                                         B4-ST
                                         B6-PL                                                                      SWA3


“B CLASS” LARGE PORTABLES 25-30HP 3” GEARCASE
18 HP Mercury         80-85       M25    MULTI-USE SERIES BEST ALL-PURPOSE PROPS
20 HP Mercury        86 Thru             3BL 10.00 x 10P C       SRA3R10-M25     080840
25 HP Mercury        80 Thru             3BL 10.00 x 11P C       SRA3R11-M25     080841
Thru-Hub Exhaust                         3BL 10.00 x 12P C       SRA3R12-M25     080842
(Hex-Head-Hub)                           3BL 10.00 x 13P C       SRA3R13-M25     080843
(Also 9.9-15 Big Foot Series)            3BL 10.00 x 14P C       SRA3R14-M25     080844
                                         3BL 10.00 x 15P C       SRA3R15-M25     080845                             SRA3
  25HP 4 Stroke                          B4A-ST
  Uses TN30 Series                       B5A-PL
  See Tohatsu/Nissan
  25-30HP                        FOUR    FOUR BLADE ACCELERATOR
                                BLADE    4BL 10.00 x 13P      SRA4R13-M25        083043
                                         B13-ST
                                         B15-PL


                                                                                                                    SRA4




   24
                             MERCURY / MARINER* (Continued)
STANDARD FINISH IS POLISH                                    RIGHT HAND                 LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup       PART NO.        UPC#       PART NO.     UPC#
“B CLASS” LARGE PORTABLES 25-30HP 3” GEARCASE - CONT.
25 HP Mariner       80-84     YM30   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
28 HP Mariner       76-78            3BL 10.00 x 10P C       SRA3R10-YM30    300840
30 HP Mariner     79 Thru 93         3BL 10.00 x 11P C       SRA3R11-YM30    300841
Flow-Thru Exhaust                    3BL 10.00 x 12P C       SRA3R12-YM30    300842
94 and 95 30 HP Mariner uses M70     3BL 10.00 x 13P C       SRA3R13-YM30    300843
                                     3BL 10.00 x 14P C       SRA3R14-YM30    300844
 25HP 4 Stroke                       B6-ST                                                                   SRA3
 Uses TN30 Series                    B7-PL
 See Tohatsu/Nissan
 25-30HP                     FOUR    FOUR BLADE ACCELERATOR
                            BLADE    4BL 10.00 x 11P      SRA4R11-YM30       303041
                                     B13-ST
                                     B15-PL
                                                                                                             SRA4

“C CLASS” MID SIZE 30-70HP 3.5” GEARCASE W/2 PIN HEAD HUB
30 HP             94 Thru     M70    THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
35 HP             84 Thru            3BL 12.25 x 9P No      WBA3R9-M70       091339
40 HP          79-83, 87 Thru        3BL 12.25 x 11P No     WBA3R11-M70      091341
45 HP             97 Thru            B11-ST
50 HP             70 Thru            B14-PL
60 HP             79 Thru                                                                                    WBA3
70 HP             Thru 84
Thru-Hub Exhaust                     MULTI-USE SERIES BEST ALL-PURPOSE PROPS - OEM EQUIVALENT
                                     3BL 10.75 x 11P C       SRC3R11-M70     090941
                                     3BL 10.75 x 12P C       SRC3R12-M70     090942
 40-50HP Mariner Pre ’93             B10-ST
 Uses YS50 Series                    B11-PL
 See Yamaha 40-60HP
                                                                                                             SRC3

                                     3BL 10.37 x 13P C      REB3R13-M70      090543
                                     3BL 10.25 x 14P C      REB3R14-M70      090544
                                     3BL 10.25 x 15P C      REB3R15-M70      090545
                                     3BL 10.25 x 16P C      REB3R16-M70      090546
                                     B8-ST
                                     B9-PL                                                                   REB3

                                     NEW WIDE BLADE STYLE
                                     3BL 10.50 x 13P C      NREB3R13-M70     097343
                                     3BL 10.375 x 14P C     NREB3R14-M70     097344
                                     B8-ST
                                     B9-PL
                                                                                                             NREB3
                                     SPEED PROPELLERS
                                     3BL 10.375 x 13P       SCB3R13-M70      091843
                                     3BL 10.375 x 14P       SCB3R14-M70      091844
                                     3BL 10.375 x 15P       SCB3R15-M70      091845
                                     3BL 10.375 x 16P       SCB3R16-M70      091846
                                     B11-ST
                                     B14-PL                                                                  SCB3



                                                                                                                25
                               MERCURY / MARINER* (Continued)
STANDARD FINISH IS POLISH                                     RIGHT HAND                   LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup        PART NO.        UPC#         PART NO.      UPC#
“C CLASS” LARGE MID SIZE 40-50HP 3.5” GEARCASE - CONT.
                               M70   FOUR BLADE ACCELERATOR
                                     4BL 10.00 x 13P C    SCB4R13-M70         091943
                                     4BL 10.00 x 15P C    SCB4R15-M70         091945
                                     B17-ST
                                     B19-PL

“D CLASS” INTERMEDIATE 3/4/6-CYL INLINE & V4 60-125HP 4.25” GEARCASE W/CASTLE HEAD HUB                             SCB4
60 - 125 HP              M135        THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
ALL YEARS FROM 1961 THRU             3BL 14.00 x 11P C     WBH3R11-M135      102241
                                     3BL 14.00 x 13P C     WBH3R13-M135      102243
                                     B17-ST
                                     B19-PL

                                     VALUE LINE ALL-PURPOSE PROPS - EQUIVALENT TO RAPTURE, BALLISTIC, STILLETTO    WBH3




                                {
                                     3BL 13.25 x 15P C      RED3R15-M135     100745    RED3L15-M135       100445
              Best Value For         3BL 13.25 x 17P C      RED3R17-M135     100747    RED3L17-M135       100447
                Standard             3BL 13.25 x 19P C      RED3R19-M135     100749    RED3L19-M135       100449
               Applications          3BL 13.25 x 21P C      RED3R21-M135     100751
                                     M11-ST
                                     M12-PL
                                                                                                                   RED3
                                     OEM EQUIVALENT STERNLIFTER - EQUIVALENT TO BLACK MAX
                                     3BL 13.75 x 13P C     MQF3R13-M135      102643
                                     3BL 13.75 x 15P C     MQF3R15-M135      102645
                                     B14-ST
                                     B16-PL

                                     LIFTER SERIES BOWLIFTING PROPS - EQUIVALENT TO LASER, BALLISTIC XL            MQF3
                                     3BL 13.50 x 18P C       PTR3R18-M135     102748
                                     3BL 13.50 x 20P C       PTR3R20-M135     102750
                                     3BL 13.50 x 22P C       PTR3R22-M135     102752
                                     3BL 13.50 x 24P C       PTR3R24-M135     102754
                                     B14-ST
                                     B16-PL
                                                                                                                   PTR3
                             FOUR    ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”)
                            BLADE    4BL 13.25 x 15P C     RXB4R15-M135    103645
                                     4BL 13.25 x 17P C     RXB4R17-M135    103647
                                     4BL 13.25 x 19P C     RXB4R19-M135    103649
                                     4BL 13.25 x 21P C     RXB4R21-M135    103651
                                     B19-ST
                                     B21-PL                                                                        RXB4

                             FOUR    FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”)
                            BLADE    4BL 13.00 x 14P C     PFS4R14-M135    103244
                                     4BL 13.00 x 15P C     PFS4R15-M135    103245
                                     4BL 13.00 x 16P C     PFS4R16-M135    103246
                                     B19-ST
                                     B21-PL
                                                                                                                   PFS4



   26
                               MERCURY / MARINER* (Continued)
STANDARD FINISH IS POLISH                                     RIGHT HAND                   LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup        PART NO.        UPC#         PART NO.       UPC#
“E CLASS” V-6 135HP & UP 4.75” GEARCASE W/FORE INSERT HUB AND CASTLE SPACER
ALL YEARS FROM              CLM200   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
1978 THRU CURRENT                    3BL 15.50 x 11P C    WBB3R11-CLM200 381441       WBB3L11-CLM200
                                     3BL 15.50 x 13P C    WBB3R13-CLM200 381443       WBB3L13-CLM200
UN SERIES PROPS FOR                  B18-ST
MERCURY/MARINER REQUIRE              B20-PL
UNMY KIT (NO CHARGE)                                                                                                WBB3

                                     3BL 16.00 x 14P C     WBV3R14-CLM200     402544
                                     3BL 16.00 x 16P C     WBV3R16-CLM200     402546
                                     B22-ST
                                     B24-PL




                                {
                                     OEM EQUIVALENT STERNLIFTING PROPS - BLACK MAX EQUIVALENT                       WBV3
                                     3BL 14.50 x 15P C      MQS3R15-CLM200     403445  MQS3L15-CLM200      403545
              Best Value For         3BL 14.50 x 17P C      MQS3R17-CLM200     403447  MQS3L17-CLM200      403547
                Standard             3BL 14.00 x 19P C      MQS3R19-CLM200     403449  MQS3L19-CLM200      403549
               Applications          3BL 13.75 x 21P C      MQS3R21-CLM200     403451  MQS3L21-CLM200      403551
                                     3BL 13.50 x 23P C      MQS3R23-CLM200     403453
                                     B14-ST                                                                         MQS3
                                     B15-PL
                                     LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, STILETTO, BALLISTIC
                                     3BL 14.25 x 15P C      PTC3R15-CLM200     385645  PTC3L15-CLM200      384945
                                     3BL 14.25 x 17P C      PTC3R17-CLM200     385647  PTC3L17-CLM200      384947
                                     3BL 14.25 x 19P C      PTC3R19-CLM200     385649  PTC3L19-CLM200      384949
                                     3BL 14.25 x 21P C      PTC3R21-CLM200     385651  PTC3L21-CLM200      384951
                                     3BL 14.25 x 23P C      PTC3R23-CLM200     385653  PTC3L23-CLM200      384953
                                     B14-ST                                                                         PTC3
                                     B15-PL

                                     FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”)
                              FOUR   4BL 14.50 x 15P C    PFL4R15-CLM200   386345
                             BLADE   4BL 14.50 x 16P C    PFL4R16-CLM200   386346
                                     4BL 14.50 x 17P C    PFL4R17-CLM200   386347
                                     B21-ST
                                     B24-PL                                                                         PFL4

                                     SKI MAX FOUR/FLATS MODERATE CUP/OFFSHORE FOUR BLADE
                              FOUR   4BL 14.25 x 15P C     PTC4R15-CLM200  382445   PTC4L15-CLM200         382845
                             BLADE   4BL 14.25 x 17P C     PTC4R17-CLM200  382447   PTC4L17-CLM200         382847
                                     4BL 14.25 x 19P C     PTC4R19-CLM200  382449   PTC4L19-CLM200         382849
                                     4BL 14.25 x 21P C     PTC4R21-CLM200  382451   PTC4L21-CLM200         382851
                                     4BL 14.25 x 23P C     PTC4R23-CLM200  382453   PTC4L23-CLM200         382853
                                     B21-ST                                                                         PTC4
                                     B24-PL




                                                                                                                       27
                              MERCURY / MARINER* (Continued)
STANDARD FINISH IS POLISH                                     RIGHT HAND                  LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup        PART NO.       UPC#         PART NO.      UPC#
“E CLASS” V-6 135HP & UP 4.75” GEARCASE W/FORE INSERT HUB AND CASTLE SPACER - CONT.
                            CLM200   OFFSHORE SERIES PROPS - 3 BLADE - SIMILAR TO MIRAGE
                                     3BL 15.25 x 15P C    OFS3R15-CLM200       385145   OFS3L15-CLM200   385245
                                     3BL 15.25 x 17P C    OFS3R17-CLM200       385147   OFS3L17-CLM200   385247
                                     3BL 15.25 x 19P C    OFS3R19-CLM200       385149   OFS3L19-CLM200   385249
                                     3BL 15.25 x 21P C    OFS3R21-CLM200       385151   OFS3L21-CLM200   385251
                                     3BL 15.25 x 23P C    OFS3R23-CLM200       385153   OFS3L23-CLM200   385253
                                     B21-ST                                                                       OFS3
                                     B24-PL

                             FOUR    OFFSHORE SERIES PROPS - 4 BLADE - SIMILAR TO MIRAGE
                            BLADE    4BL 15.25 x 15P C    OFS4R15-CLM200       385345   OFS4L15-CLM200   385445
                                     4BL 15.25 x 17P C    OFS4R17-CLM200       385347   OFS4L17-CLM200   385447
                                     4BL 15.25 x 19P C    OFS4R19-CLM200       385349   OFS4L19-CLM200   385449
                                     4BL 15.25 x 21P C    OFS4R21-CLM200       385351   OFS4L21-CLM200   385451
                                     4BL 15.25 x 23P C    OFS4R23-CLM200       385353   OFS4L23-CLM200   385453
                                     B27-ST                                                                       OFS4
                                     B31-PL

                             FOUR    HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 4 BLADE
                            BLADE    4BL 15.25 x 15P C   OFX4R15-CLM200    557645    OFX4L15-CLM200      557745
                                     4BL 15.25 x 17P C   OFX4R17-CLM200    557647    OFX4L17-CLM200      557747
                                     4BL 15.25 x 19P C   OFX4R19-CLM200    557649    OFX4L19-CLM200      557749
                                     4BL 15.25 x 21P C   OFX4R21-CLM200    557651    OFX4L21-CLM200      557751
                                     4BL 15.25 x 23P C   OFX4R23-CLM200    557653    OFX4L23-CLM200      557753
                                     4BL 15.25 x 25P C   OFX4R25-CLM200    557655    OFX4L25-CLM200      557755   OFX4
                                     4BL 15.25 x 27P C   OFX4R27-CLM200    557657    OFX4L27-CLM200      557757
                                     B27-ST
                                     B31-PL

                                     HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 3 BLADE
                                     3BL 15.25 x 15P C     OFX3R15-CLM200             OFX3L15-CLM200
                                     3BL 15.25 x 17P C     OFX3R17-CLM200             OFX3L17-CLM200
                                     3BL 15.25 x 19P C     OFX3R19-CLM200             OFX3L19-CLM200
                                     3BL 15.25 x 21P C     OFX3R21-CLM200             OFX3L21-CLM200
                                     3BL 15.25 x 23P C     OFX3R23-CLM200             OFX3L23-CLM200
                                                                                                                  OFX3
                                     3BL 15.25 x 25P C     OFX3R25-CLM200             OFX3L25-CLM200
                                     3BL 15.25 x 27P C     OFX3R27-CLM200             OFX3L27-CLM200
                                     B21-ST
                                     B24-PL
                                     SEMI-CLEAVER STERNLIFTING PROPS - 3 BLADE
                                     3BL 14.00 x 15P C     SCE3R15-CLM200             SCE3L15-CLM200
                                     3BL 14.00 x 17P C     SCE3R17-CLM200             SCE3L17-CLM200
                                     3BL 14.00 x 19P C     SCE3R19-CLM200             SCE3L19-CLM200
                                     B17-ST                                                                       SCE3
                                     B19-PL
                             FOUR    FOUR BLADE SEMI-CLEAVER STERNLIFTING PROPS - 4 BLADE
                            BLADE    4BL 14.00 x 15P C     SCE4R15-CLM200             SCE4L15-CLM200
                                     4BL 14.00 x 17P C     SCE4R17-CLM200             SCE4L17-CLM200
                                     4BL 14.00 x 19P C     SCE4R19-CLM200             SCE4L19-CLM200
                                     B36-ST
                                     B37-PL                                                                       SCE4


   28
                                 MERCURY / MARINER* (Continued)
STANDARD FINISH IS POLISH                                         RIGHT HAND                      LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup           PART NO.          UPC#          PART NO.          UPC#
“E CLASS” V-6 135HP & UP 4.75” GEARCASE W/FORE INSERT HUB AND CASTLE SPACER C - CONT.
                            CLM200    ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”)
                              FOUR    - SIMILAR TO TROPHY - SMALL HUB
                             BLADE    4BL 13.75 x 17P C         TRO4R17-CLM150
                                      4BL 13.75 x 19P C         TRO4R19-CLM150
                                      4BL 13.75 x 21P C         TRO4R21-CLM150
                                      4BL 13.75 x 23P C         TRO4R23-CLM150 456153
                                      4BL 13.75 x 25P C         TRO4R25-CLM150 456155
                                      4BL 13.75 x 27P C         TRO4R27-CLM150 456157                                         TRO4
                                      B21-ST
                                      B24-PL

                                      HIGH PERFORMANCE BASS/BAY SERIES BOWLIFTING PROPS - SIMILAR TO YAMAHA VX-MAX
                                      3BL 15.25 x 23P C       VMX3R23-CLM200
                                      3BL 15.25 x 25P C       VMX3R25-CLM200
                                      3BL 15.25 x 27P C       VMX3R27-CLM200
                                      B21-ST
                                      B24-PL                                                                                  VMX3

“E CLASS” V-6 BIG SHAFT 4.75” GEARCASE
200SX OPTIMAX       2001 Thru         ALL STANDARD PROPELLER
225 PROMAX                            BLADE STYLE / HOUSINGS ARE AVAILABLE
280 2.5 LITRE                         USE 19 SPLINE DRIVER (STEEL SOLID)
300X                                  MS175 FOR O/T GEARCASE
                                      MS275 FOR THRU HUB EXHAUST

                                                  MERCRUISER*
STANDARD FINISH IS POLISH                                         RIGHT HAND                      LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup           PART NO.          UPC#          PART NO.          UPC#
“E CLASS” ALL 120-330HP 1982 & NEWER 4.75” GEARCASE W/FORE INSERT HUB & CASTLE SPACER
                            CLM200    THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE
CLM200 SERIES FOR                     3BL 15.50 x 11P C    WBB3R11-CLM200 381441      WBB3L11-CLM200
MERCRUISER REQUIRES                   3BL 15.50 x 13P C    WBB3R13-CLM200 381443      WBB3L13-CLM200
UNMY KIT (NO CHARGE)                  B18-ST
                                      B20-PL                                                                                  WBB3

                                      3BL 16.00 x 14P C        WBV3R14-CLM200       402544
                                      3BL 16.00 x 16P C        WBV3R16-CLM200       402546
                                      B22-ST
                                      B24-PL


                                                                                                                              WBV3




                                  {
                                      OEM EQUIVALENT STERNLIFTING PROPS - BLACK MAX EQUIVALENT
                                      3BL 14.50 x 15P C    MQS3R15-CLM200     403445  MQS3L15-CLM200                 403545
                Best Value For        3BL 14.50 x 17P C    MQS3R17-CLM200     403447  MQS3L17-CLM200                 403547
                  Standard            3BL 14.00 x 19P C    MQS3R19-CLM200     403449  MQS3L19-CLM200                 403549
                 Applications         3BL 13.75 x 21P C    MQS3R21-CLM200     403451  MQS3L21-CLM200                 403551
                                      3BL 13.50 x 23P C    MQS3R23-CLM200     403453
                                      B14-ST
                                      B15-PL                                                                                  MQS3



                                                                                                                                 29
                                                        MERCRUISER*
STANDARD FINISH IS POLISH                                                     RIGHT HAND                           LEFT HAND
Motor & Model       Year                    Blds/Dia/Pitch/Cup                 PART NO.             UPC#            PART NO.             UPC#
“E CLASS” ALL 120-330HP 1982 & NEWER 4.75” GEARCASE W/FORE INSERT HUB & CASTLE SPACER
                               CLM200       “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 3 BLADE
CLM200 SERIES FOR                           3BL 14.25 x 17P C      SFS3R17-CLM200
MERCRUISER REQUIRES                         3BL 14.25 x 19P C      SFS3R19-CLM200
UNMY KIT (NO CHARGE)                        3BL 14.25 x 21P C      SFS3R21-CLM200
                                            3BL 14.25 x 23P C      SFS3R23-CLM200
                                            B16-ST
                                            B18-PL                                                                                                    SFS3

                                            “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 4 BLADE
                                 FOUR       4BL 14.25 x 17P C      SFS4R17-CLM200
                                BLADE       4BL 14.25 x 19P C      SFS4R19-CLM200
                                            4BL 14.25 x 21P C      SFS4R21-CLM200
                                            4BL 14.25 x 23P C      SFS4R23-CLM200
                                            B21-ST
                                            B24-PL                                                                                                    SFS4

                                            LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, BALLISTIC, STILETTO
                                            3BL 14.25 x 15P C      PTC3R15-CLM200     385645  PTC3L15-CLM200       384945
                                            3BL 14.25 x 17P C      PTC3R17-CLM200     385647  PTC3L17-CLM200       384947
                                            3BL 14.25 x 19P C      PTC3R19-CLM200     385649  PTC3L19-CLM200       384949
                                            3BL 14.25 x 21P C      PTC3R21-CLM200     385651  PTC3L21-CLM200       384951
                                            3BL 14.25 x 23P C      PTC3R23-CLM200     385653  PTC3L23-CLM200       384953
                                            B14-ST                                                                                                    PTC3
                                            B15-PL

                                            SKI MAX FOUR - 4 BLADE SIMILAR TO BLACK MAX
                                 FOUR       4BL 14.50 x 15P C      MQS4R15-CLM200     386445                   MQS4L15-CLM200           386545
                                BLADE       4BL 14.50 x 17P C      MQS4R17-CLM200     386447                   MQS4L17-CLM200           386547
                                            4BL 14.00 x 19P C      MQS4R19-CLM200     386449                   MQS4L19-CLM200           386549
                                            4BL 13.75 x 21P C      MQS4R21-CLM200     386451                   MQS4L21-CLM200           386551
                                            B21-ST
                                            B24-PL                                                                                                    MQS4

                                            OFFSHORE SERIES PROPS - SIMILAR TO MIRAGE
                                            3BL 15.25 x 15P C    OFS3R15-CLM200     115145                     OFS3L15-CLM200           115245
                                            3BL 15.25 x 17P C    OFS3R17-CLM200     115147                     OFS3L17-CLM200           115247
Trim Tab
                                            3BL 15.25 x 19P C    OFS3R19-CLM200     115149                     OFS3L19-CLM200           115249
Minimum Trim                                3BL 15.25 x 21P C    OFS3R21-CLM200     115151                     OFS3L21-CLM200           115251
Tab To                                      3BL 15.25 x 23P C    OFS3R23-CLM200     115153                     OFS3L23-CLM200           115253
Propeller Blade                             3BL 15.25 x 25P C    OFS3R25-CLM200     115155                     OFS3L25-CLM200           115255
Clearance 3/16”
                                                                                                                                                      OFS3
                                            3BL 15.25 x 27P C    OFS3R27-CLM200     115157                     OFS3L27-CLM200           115257
                                            B21-ST
                                            B24-PL

NOTE: When using a higher performance/hi rake propeller, these installations will require trim tab to be narrowed or replaced with high performance
trim tab Merc #4639941.




    30
                                          MERCRUISER* (Continued)
STANDARD FINISH IS POLISH                                               RIGHT HAND                       LEFT HAND
Motor & Model       Year                  Blds/Dia/Pitch/Cup             PART NO.           UPC#          PART NO.         UPC#
“E CLASS” ALL 120-330HP 1982 & NEWER 4.75” GEARCASE W/FORE INSERT HUB AND CASTLE SPACER
                               CLM200     BRAVO 1 FOUR BLADE - RUBBER HUB (SOLID HUB AVAILABLE-CALL) - SIMILAR TO MIRAGE
CLM200 SERIES FOR                FOUR     4BL 15.25 x 15P C          OFS4R15-CLM200         115345       OFS4L15-CLM200    115445
MERCRUISER REQUIRES             BLADE     4BL 15.25 x 17P C          OFS4R17-CLM200         115347       OFS4L17-CLM200    115447
UNMY KIT (NO CHARGE)                      4BL 15.25 x 19P C          OFS4R19-CLM200         115349       OFS4L19-CLM200    115449
                                          4BL 15.25 x 21P C          OFS4R21-CLM200         115351       OFS4L21-CLM200    115451
                                          4BL 15.25 x 23P C          OFS4R23-CLM200         115353       OFS4L23-CLM200    115453
                                          4BL 15.25 x 25P C          OFS4R25-CLM200         115355       OFS4L25-CLM200    115455   OFS4
                                          4BL 15.25 x 27P C          OFS4R27-CLM200         115357       OFS4L27-CLM200    115457
                                          B27-ST
                                          B31-PL
                                          HIGH PERFORMANCE OFFSHORE LIFTER SERIES
                                  FOUR    4BL 15.25 x 15P C          OFX4R15-CLM200         557645       OFX4L15-CLM200    557745
                                 BLADE    4BL 15.25 x 17P C          OFX4R17-CLM200         557647       OFX4L17-CLM200    557747
                                          4BL 15.25 x 19P C          OFX4R19-CLM200         557649       OFX4L19-CLM200    557749
NOTE: When using a higher                 4BL 15.25 x 21P C          OFX4R21-CLM200         557651       OFX4L21-CLM200    557751
performance/hi rake propeller,            4BL 15.25 x 23P C          OFX4R23-CLM200         557653       OFX4L23-CLM200    557753
these installations will require
                                          4BL 15.25 x 25P C          OFX4R25-CLM200         557655       OFX4L25-CLM200    557755   OFX4
trim tab to be narrowed or
                                          4BL 15.25 x 27P C          OFX4R27-CLM200         557657       OFX4L27-CLM200    557757
replaced with high performance
trim tab Merc #4639941                    B27-ST
                                          B31-PL

“E CLASS” ALL 120-330HP 1981 & OLDER 4.75” GEARCASE W/FORE INSERT HUB AND CASTLE SPACER
Mercruiser         Prior to 82            SELECTED MODELS AVAILABLE IN UNIVERSAL CONFIGURATION
140-360 HP                                CALL TECH SUPPORT FOR APPLICATION ASSISTANCE
Wide Blades & Large Diameter
For Heavier Cruisers

“F CLASS” BRAVO 2 LARGE DIAMETER 5.75” GEARCASE
Mercruiser                         M400   OEM EQUIVALENT ALL-PURPOSE PROPS
Bravo 2            All Years              3BL 18.50 x 17P C     BRA3R17-M400               394547      BRA3L17-M400        394647
NOTE: Standard      Large                 3BL 18.50 x 19P C     BRA3R19-M400               394549      BRA3L19-M400        394649
Finish is Satin    Diameter               3BL 18.50 x 21P C     BRA3R21-M400               394551      BRA3L21-M400        394651
                                          3BL 18.50 x 23P C     BRA3R23-M400               394553      BRA3L23-M400        394653
                                                                                                                                    BRA3
                                          3BL 17.25 x 17P C           BRS3R17-M400         394747      BRS3L17-M400        394847
                   Smaller                3BL 17.25 x 19P C           BRS3R19-M400         304749      BRS3L19-M400        394849
                   Diameter               3BL 17.25 x 21P C           BRS3R21-M400         394751      BRS3L21-M400        394851
                                          3BL 17.25 x 23P C           BRS3R23-M400         394753      BRS3L23-M400        304853
                                          F1-ST
                                                                                                                                    BRS3
                                 OEM EQUIVALENT ALL-PURPOSE PROPS - 4 BLADE - SUPER EFFICIENCY/QUICK PLANING
                         FOUR    4BL 18.50 x 17P C       BRA4R17-M400      394947  BRA4L17-M400     395047
                       BLADE     4BL 18.50 x 19P C       BRA4R19-M400      394949  BRA4L19-M400     395049
                                 4BL 18.50 x 21P C       BRA4R21-M400      394951  BRA4L21-M400     395051
                                 4BL 18.50 x 23P C       BRA4R23-M400      394953  BRA4L23-M400     395053
                                 F3-ST
                                                          BRS 4-BLADE AVAILABLE
BRAVO 2 - ALUMINUM PROP SERIES AVAILABLE NOW IN LIMITED PITCH RANGE                                                                 BRA4


                               CUSHIONLOK® HUB SYSTEM AVAILABLE
 FOR EXTREME DUTY APPLICATIONS, WHERE HUB FAILURE IS A CONCERN, ALL BRAVO II PROPELLERS ARE
 AVAILABLE IN THE PATENTED CUSHIONLOK® HUB SYSTEM FOR AN ADDITIONAL FEE. (SEE PAGE 4 FOR DETAILS)



                                                                                                                                       31
                                        EVINRUDE - JOHNSON*
STANDARD FINISH IS POLISH                                       RIGHT HAND                  LEFT HAND
Motor & Model       Year               Blds/Dia/Pitch/Cup        PART NO.        UPC#        PART NO.        UPC#
“A CLASS” SMALL PORTABLES 9.9-15HP 2.75” GEARCASE
9.9-15             74Thru       OM15   MULTI-USE SERIES BEST ALL-PURPOSE PROPS - SEMI WEEDLESS FACTORY EQUIVALENT
Thru Hub Exhaust                       3BL 9.25 x 9P No        SWA3R9-OM15     121739
                                       3BL 9.25 x 10P No      SWA3R10-OM15     121740
   15HP 4 STROKE                       3BL 9.25 x 11P No      SWA3R11-OM15     121741
  USES SZ15 SERIES                     B4-ST
                                       B6-PL
                                                                                                                     SWA3
“B CLASS” COMPACTS/TILLER MODELS THRU-HUB EXHAUST 20-35HP 3” GEARCASE
20 HP 2-Stroke     84-05        OM35   MULTI-USE SERIES BEST ALL-PURPOSE PROPS - SST EQUIVALENT
25 HP 2-Stroke     84-05               3BL 10.00 x 10P C       SRA3R10-OM35    140840
30 HP 2-Stroke     84-05               3BL 10.00 x 11P C       SRA3R11-OM35    140841
35 HP 2-Stroke     76-83               3BL 10.00 x 12P C       SRA3R12-OM35    140842
Thru-Hub                               3BL 10.00 x 13P C       SRA3R13-OM35    140843
                                       3BL 10.00 x 14P C       SRA3R14-OM35    140844
 20-30HP 4 STROKE                      3BL 10.00 x 15P C       SRA3R15-OM35    140845                                SRA3
 USES SZ30 SERIES                      B4-ST
 See Suzuki 20-30HP                    B6-PL

                                FOUR   FOUR BLADE ACCELERATOR - 4 BLADE
                               BLADE   4BL 10.00 x 13P      SRA4R13-OM35        143043
                                       B13-ST
                                       B15-PL
                                                                                                                     SRA4
“C CLASS” MID SIZE 40-75HP 3.5” GEARCASE W/THRU HUB EXHAUST
                                OM50   OEM EQUIVALENT PROPS - SST EQUIVALENT
40 HP 2 Stroke       84 Thru           3BL 12.50 x 11P C      SRG3R11-OM50      151141
48 HP 2 Cyl-2 Stroke 87 Thru           3BL 12.50 x 13P C      SRG3R13-OM50      151143
50 HP 2 Cyl-2 Stroke 75 Thru           3BL 12.25 x 15P C      SRG3R15-OM50      151145
55 HP 2 Cyl-2 Stroke 76-79             3BL 11.75 x 17P C      SRG3R17-OM50      151147
60 HP 2 Cyl-2 Stroke 80-85             B5A-ST                                                                        SRG3
75 HP 2 Cyl-2 Stroke 75-85             B9-PL
                                       FOUR BLADE ACCELERATOR SERIES
                                FOUR   4BL 11.25 x 15P C      SRD4R15-OM50      156645
                               BLADE   4BL 11.25 x 17P C      SRD4R17-OM50      156647
                                       B16-ST
                                       B17A-PL
                                                                                                                     SRD4
“D CLASS” INTERMEDIATE 3/4CYL 45-140HP 4.25” GEARCASE (INCLUDING 13 SPLINE STERN DRIVES)
45-140HP                      OM140    THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
Medium Gearcase 2 Stroke               3BL 14.00 x 11P C     WBH3R11-OM140     162241
60-70HP 4 Stroke 2002 & Newer          3BL 14.00 x 13P C     WBH3R13-OM140     162243
40-50-60HP E-TEC                       B16-ST
90HP E-TEC (20” SHAFT)                 B18-PL
                                                                                                                     WBH3




                                  {
NOTE: 115HP Offshore                   VALUE LINE ALL-PURPOSE PROPS - EQUIVALENT TO RAPTURE, BALLISTIC, STILETTO
 is V6 Gearcase                        3BL 13.25 x 15P C     RED3R15-OM140     160745    RED3L15-OM140      160445
                Best Value For         3BL 13.25 x 17P C     RED3R17-OM140     160747    RED3L17-OM140      160447
                  Standard             3BL 13.25 x 19P C     RED3R19-OM140     160749    RED3L19-OM140      160449
                 Applications          3BL 13.25 x 21P C     RED3R21-OM140     160751    RED3L21-OM140      160451
                                       O11-ST
                                       O12-PL                                                                        RED3



   32
                             EVINRUDE - JOHNSON* (Continued)
STANDARD FINISH IS POLISH                                      RIGHT HAND                    LEFT HAND
Motor & Model       Year            Blds/Dia/Pitch/Cup          PART NO.         UPC#         PART NO.         UPC#
“D CLASS” INTERMEDIATE 3/4CYL 45-140HP 4.25” GEARCASE - (INCLUDING 13 SPLINE STERN DRIVES) CONT.
                            OM140   OEM EQUIVALENT STERNLIFTER - FACTORY EQUIVALENT TO SST
                                    3BL 13.75 x 15P C     OST3R15-OM140    166745
                                    3BL 13.38 x 17P C     OST3R17-OM140    166747
                                    3BL 13.25 x 19P C     OST3R19-OM140    166749
                                    3BL 13.25 x 21P C     OST3R21-OM140    166751
                                    B11-ST                                                                            OST3
                                    B14-PL

                                    OEM EQUIVALENT NEW STYLE - NARROW TIP
                     NEW STYLE      3BL 14.00 x 15P C    OSN3R15-OM140          166845
                   SWEPT BLADE      3BL 14.00 x 17P C    OSN3R17-OM140          166847
                                    3BL 14.00 x 19P C    OSN3R19-OM140          166849
                                    3BL 14.00 x 21P C    OSN3R21-OM140          166841
                                    B14-ST                                                                            OSN3
                                    B16-PL

                                    LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAKER, BALLISTIC, RAPTURE
                                    3BL 13.50 x 18P C      PTR3R18-OM140      162748
                                    3BL 13.50 x 20P C      PTR3R20-OM140      162750
                                    3BL 13.50 x 22P C      PTR3R22-OM140      162752
                                    3BL 13.50 x 24P C      PTR3R24-OM140      162754                                  PTR3
                                    B14-ST
                                    B16-PL

                                    SMALL BLADE AREA, SMALL DIAMETER PROPS, FOR RPM GAIN - 3 BLADE
  WHERE RPM’S ARE LOW,
                                    3BL 12.75 x 13P C     SBP3R13-OM140             SBP3L13-OM140
  SBP3 AND XSB4 BLADE               3BL 12.75 x 15P C     SBP3R15-OM140             SBP3L15-OM140
 STYLES OFFER SMALLER               3BL 12.75 x 17P C     SBP3R17-OM140             SBP3L17-OM140
 DIAMETER & BLADE AREA              3BL 12.75 x 19P C     SBP3R19-OM140             SBP3L19-OM140                     SBP3
                                    B11-ST
                                    B12-PL

                                    SMALL BLADE AREA, SMALL DIAMETER PROPS, FOR RPM GAIN - 4 BLADE
                             FOUR   4BL 12.75 x 13P C     XSB4R13-OM140             XSB4L13-OM140
                            BLADE   4BL 12.75 x 15P C     XSB4R15-OM140             XSB4L15-OM140
                                    4BL 12.75 x 17P C     XSB4R17-OM140             XSB4L17-OM140
                                    4BL 12.75 x 19P C     XSB4R19-OM140             XSB4L19-OM140
                                    B19-ST
                                    B21-PL                                                                            XSB4

                             FOUR   ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”) - 4 BLADE
                            BLADE   4BL 13.25 x 15P C      RXB4R15-OM140      163645
                                    4BL 13.25 x 17P C      RXB4R17-OM140      163647
                                    4BL 13.25 x 19P C      RXB4R19-OM140      163649
                                    4BL 13.25 x 21P C      RXB4R21-OM140      163651
                                    B19-ST
                                    B21-PL                                                                            RXB4

                  NOTE: 90-115-140 HP 2002 & NEWER 4 STROKES – USE SUZUKI PROPELLERS.
        SEE EQUIVALENT HORSEPOWER AND GEARCASE SIZE LISTINGS IN SUZUKI SECTION – SF 115 SERIES.


                                                                                                                         33
                               EVINRUDE - JOHNSON* (Continued)
STANDARD FINISH IS POLISH                                        RIGHT HAND                     LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup          PART NO.         UPC#          PART NO.        UPC#
“D CLASS” INTERMEDIATE 3/4CYL 45-140HP 4.25” GEARCASE - (INCLUDING 13 SPLINE STERN DRIVES) CONT.
                             OM140    FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
                              FOUR    4BL 13.00 x 14P C       PFS4R14-OM140     163244
                             BLADE    4BL 13.00 x 15P C       PFS4R15-OM140     163245
                                      4BL 13.00 x 16P C       PFS4R16-OM140     163246
                                      B19-ST
                                      B21-PL                                                                            PFS4




“E CLASS” V6/V8 100HP & UP 4.75” GEARCASE (INCLUDING 15 SPLINE STERN DRIVES)
All V6 and 115/120HP         CLJ200   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
LOOPER & OFFSHORE           & OM250   3BL 15.50 x 11P C    WBB3R11-CLJ200    381441    WBB3L11-CLJ200
                                      3BL 15.50 x 13P C    WBB3R13-CLJ200    381443    WBB3L13-CLJ200
                                      B18-ST
                                      B20-PL
                                                                                                                        WBB3
                                      OEM EQUIVALENT STERNLIFTING PROPS - FACTORY EQUIVALENT TO SST




                                 {
                                      3BL 15.00 x 15P C    OSS3R15-OM250      423945
              Best Value For          3BL 15.00 x 17P C    OSS3R17-OM250      423947
                Standard              3BL 14.50 x 19P C    OSS3R19-OM250      423949
               Applications           3BL 14.25 x 21P C    OSS3R21-OM250      423931
                                      B13-ST
                                      B15-PL                                                                            OSS3

                                      LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, STILETTO, BALLISTIC
                                      3BL 14.25 x 15P C      PTC3R15-CLJ200     385645   PTC3L15-CLJ200     384945
                                      3BL 14.25 x 17P C      PTC3R17-CLJ200     385647   PTC3L17-CLJ200     384947
                                      3BL 14.25 x 19P C      PTC3R19-CLJ200     385649   PTC3L19-CLJ200     384949
                                      3BL 14.25 x 21P C      PTC3R21-CLJ200     385651   PTC3L21-CLJ200     384951
                                      3BL 14.25 x 23P C      PTC3R23-CLJ200     385653   PTC3L23-CLJ200     384953
                                      B14-ST                                                                            PTC3
                                      B15-PL

                                      ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”)
                                      SIMILAR TO RENEGADE
                              FOUR    4BL 13.75 x 17P C    TRO4R17-CLJ150
                             BLADE    4BL 13.75 x 19P C    TRO4R19-CLJ150
                                      4BL 13.75 x 21P C    TRO4R21-CLJ150
                                      4BL 13.75 x 23P C    TRO4R23-CLJ150   456153
                                      4BL 13.75 x 25P C    TRO4R25-CLJ150   456155
                                      4BL 13.75 x 27P C    TRO4R27-CLJ150   456157                                      TRO4
                                      B21-ST
                                      B24-PL

                              FOUR    FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
                             BLADE    4BL 14.50 x 15P C     PFL4R15-OM250   426345
                                      4BL 14.50 x 16P C     PFL4R16-OM250   426346
                                      4BL 14.50 x 17P C     PFL4R17-OM250   426347
                                      B21-ST
                                      B24-PL                                                                            PFL4




   34
                             EVINRUDE - JOHNSON* (Continued)
STANDARD FINISH IS POLISH                                   RIGHT HAND                LEFT HAND
Motor & Model       Year            Blds/Dia/Pitch/Cup       PART NO.      UPC#        PART NO.      UPC#
“E CLASS” V6/V8 100HP & UP 4.75” GEARCASE (INCLUDING 15 SPLINE STERN DRIVES)
                  CLJ200 & OM250    SKI MAX FOUR/FLATS MODERATE CUP/OFFSHORE FOUR
                            FOUR    4BL 14.25 x 15P C     PTC4R15-CLJ200  382445    PTC4L15-CLJ200   382845
                          BLADE     4BL 14.25 x 17P C     PTC4R17-CLJ200  382447    PTC4L17-CLJ200   382847
                                    4BL 14.25 x 19P C     PTC4R19-CLJ200  382449    PTC4L19-CLJ200   382849
                                    4BL 14.25 x 21P C     PTC4R21-CLJ200  382451    PTC4L21-CLJ200   382851
                                    B21-ST
                                    B24-PL                                                                    PTC4

                                    OFFSHORE SERIES PROPS - 3 BLADE
                                    3BL 15.25 x 15P C    OFS3R15-CLJ200    385145   OFS3L15-CLJ200   385245
                                    3BL 15.25 x 17P C    OFS3R17-CLJ200    385147   OFS3L17-CLJ200   385247
                                    3BL 15.25 x 19P C    OFS3R19-CLJ200    385149   OFS3L19-CLJ200   385249
                                    3BL 15.25 x 21P C    OFS3R21-CLJ200    385151   OFS3L21-CLJ200   385251
                                    3BL 15.25 x 23P C    OFS3R23-CLJ200    385153   OFS3L23-CLJ200   385253
                                    3BL 15.25 x 25P C    OFS3R25-CLJ200    385155   OFS3L25-CLJ200   385255   OFS3
                                    3BL 15.25 x 27P C    OFS3R27-CLJ200    385157   OFS3L27-CLJ200   385257
                                    B21-ST
                                    B24-PL

                                    OFFSHORE SERIES PROPS - 4 BLADE
                             FOUR   4BL 15.25 x 15P C    OFS4R15-CLJ200             OFS4L15-CLJ200
                            BLADE   4BL 15.25 x 17P C    OFS4R17-CLJ200             OFS4L17-CLJ200
                                    4BL 15.25 x 19P C    OFS4R19-CLJ200             OFS4L19-CLJ200
                                    4BL 15.25 x 21P C    OFS4R21-CLJ200             OFS4L21-CLJ200
                                    4BL 15.25 x 23P C    OFS4R23-CLJ200             OFS4L23-CLJ200
                                    4BL 15.25 x 25P C    OFS4R25-CLJ200             OFS4L25-CLJ200            OFS4
                                    4BL 15.25 x 27P C    OFS4R27-CLJ200             OFS4L27-CLJ200
                                    B27-ST
                                    B31-PL

                                    “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 3 BLADE
                                    3BL 14.25 x 17P C      SFS3R17-CLJ200
                                    3BL 14.25 x 19P C      SFS3R19-CLJ200
                                    3BL 14.25 x 21P C      SFS3R21-CLJ200
                                    3BL 14.25 x 23P C      SFS3R23-CLJ200
                                    B16-ST
                                    B18-PL                                                                    SFS3

                                    “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 4 BLADE
                                    4BL 14.25 x 17P C      SFS4R17-CLJ200
                                    4BL 14.25 x 19P C      SFS4R19-CLJ200
                                    4BL 14.25 x 21P C      SFS4R21-CLJ200
                                    4BL 14.25 x 23P C      SFS4R23-CLJ200
                                    B21-ST
                                    B24-PL                                                                    SFS4




                                                                                                                 35
                             EVINRUDE - JOHNSON* (Continued)
STANDARD FINISH IS POLISH                                    RIGHT HAND                 LEFT HAND
Motor & Model       Year            Blds/Dia/Pitch/Cup        PART NO.       UPC#        PART NO.       UPC#
“E CLASS” V6/V8 100HP & UP 4.75” GEARCASE (INCLUDING 15 SPLINE STERN DRIVES) - CONT.
                  CLJ200 & OM250    HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 3 BLADE
                                    3BL 15.25 x 15P C   OFX3R15-CLJ200               OFX3L15-CLJ200
                                    3BL 15.25 x 17P C   OFX3R17-CLJ200               OFX3L17-CLJ200
                                    3BL 15.25 x 19P C   OFX3R19-CLJ200               OFX3L19-CLJ200
                                    3BL 15.25 x 21P C   OFX3R21-CLJ200               OFX3L21-CLJ200
                                    3BL 15.25 x 23P C   OFX3R23-CLJ200               OFX3L23-CLJ200
                                    3BL 15.25 x 25P C   OFX3R25-CLJ200               OFX3L25-CLJ200                OFX3
                                    3BL 15.25 x 27P C   OFX3R27-CLJ200               OFX3L27-CLJ200
                                    B21-ST
                                    B24-PL

                                    HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 4 BLADE
                             FOUR   4BL 15.25 x 15P C   OFX4R15-CLJ200               OFX4L15-CLJ200
                            BLADE   4BL 15.25 x 17P C   OFX4R17-CLJ200               OFX4L17-CLJ200
                                    4BL 15.25 x 19P C   OFX4R19-CLJ200               OFX4L19-CLJ200
                                    4BL 15.25 x 21P C   OFX4R21-CLJ200               OFX4L21-CLJ200
                                    4BL 15.25 x 23P C   OFX4R23-CLJ200               OFX4L23-CLJ200
                                    4BL 15.25 x 25P C   OFX4R25-CLJ200               OFX4L25-CLJ200                OFX4
                                    4BL 15.25 x 27P C   OFX4R27-CLJ200               OFX4L27-CLJ200
                                    B27-ST
                                    B31-PL

                                    HIGH PERFORMANCE BASS/BAY SERIES BOWLIFTING PROPS - SIMILAR TO YAMAHA VX-MAX
                                    3BL 15.25 x 23P C    VMX3R23-CLJ200
                                    3BL 15.25 x 25P C    VMX3R25-CLJ200
                                    3BL 15.25 x 27P C    VMX3R27-CLJ200
                                    B21-ST
                                    B24-PL                                                                         VMX3


 OMC COBRA DRIVES AFTER 1994 WITH 19 SPLINE SHAFT - PLEASE REFER TO VOLVO SX DRIVE LISTINGS.




   36
XTREME Value Small Horsepower Props
(20-35 HP and 35-60 HP Small Gearcase Only)
3 Burnished Satin Finish
3 No cupping (Use on submerged applications only)
3 Low Rake geometry-easy to turn but not recommended for ventilating applications
3 Use classic rubber hub system and original factory hardware (20-60 HP only)
“B CLASS” 3” Gearcase (Typical 20-35 HP)                                                 ILB3
Bombardier/Evinrude/Johnson      ILB3R-OM35         11” and 13” pitch available
Honda                             ILB3R-H25         11” pitch available
Mercury                           ILB3R-M25         11” and 13” pitch available
Suzuki 20-30 HP                  SLC3R-SZ30         12” and 13” pitch available
Tohatsu-Nissan                   ILB3R-TN30         11” and 13” pitch available
Yamaha                           ILB3R-YM30         11” and 13” pitch available
B1-ST                                                                                    SLC3




“C CLASS” 3.5” Gearcase
(Typical 30-60 HP Small Foot Applications)                                               OLC3
Bombardier/Evinrude/Johnson     OLC3R-OM50          15” and 17” pitch available
Honda                            ILC3R-YS50         11”, 12”, 13”, 14” pitch available
Mercury                           ILC3R-M70         12”, 13”, 14”, 15” pitch available
Suzuki 40-65 HP                  ILC3R-YS50         11”, 12”, 13”, 14” pitch available
Tohatsu-Nissan 40-50 HP          ILC3R-TN40         11”, 12”, 13”, 14” pitch available
Yamaha                           ILC3R-YS50         11”, 12”, 13”, 14” pitch available
C1-ST
                                                                                         ILC3



                                                                                                37
XTREME Value Universal Hub Props
(V4 & V6 Gearcase - 60-250 HP)
3 Mirror polish finish
3 Moderate Rake geometry - with cupping suitable for most applications
3 Use QuadraHub exchangeable universal hub system / Classic Rubber Hub Available

“D CLASS” V-4 Gearcase
(Typical 60-140 HP Applications) 3-Blade Basic
Bombardier/Evinrude/Johnson,       ELD3R-VT145       15”, 17”, 19”, 21” pitch available
Honda, Mercury, Suzuki, Tohatsu,
Nissan, Yamaha
                                   D1-PL (plastic hub not included)                       ELD3
Rubber Hub ELD Models              D2-PL
Suzuki 14” Dia. Rubber Hub         D3-PL



“E CLASS” V-6 Gearcase
(Typical 135-250 HP Applications) 3-Blade & 4-Blade Basic
Bombardier/Evinrude/Johnson,       ELE3R-MS275      15”, 17”, 19”, 21” pitch available
Honda, Mercury, Suzuki, Yamaha                    E1-PL (plastic hub not included)
Rubber Hub ELE3 Models                                                      E2-PL
Bombardier/Evinrude/Johnson,       ELE4R-MS275   15”, 17”, 19”, 21” pitch available       ELE3
Honda, Mercury, Suzuki, Yamaha                 E3-PL (plastic hub not included)


QH Series plastic hub and adapter kits available for most applications
                                                                                 KT-1




  38
The R-Series propellers offer excellent all-around performance in a highly polished finish
with the convenience of the square, drop-in hub cavity. These props are equivalent to the
Rapture® line of performance propellers.

3       PERFORMANCE BLADE GEOMETRY
3       DROP-IN HUB CAVITY
3       HIGH POLISH FINISH
3       RIGHT AND LEFT HAND ROTATION

                                                           R-SERIES*
STANDARD FINISH IS POLISH                                               RIGHT HAND             LEFT HAND
Motor & Model       Year                  Blds/Dia/Pitch/Cup             PART NO.     UPC#      PART NO.     UPC#

“D CLASS” INTERMEDIATE
                               VT145      3BL 13.25 x 13P C           RAF3R13-VT145          RAF3L13-VT145
                                          3BL 13.25 x 15P C           RAF3R15-VT145          RAF3L15-VT145
                                          3BL 13.25 x 17P C           RAF3R17-VT145          RAF3L17-VT145
                                          3BL 13.25 x 19P C           RAF3R19-VT145          RAF3L19-VT145
                                          3BL 13.25 x 21P C           RAF3R21-VT145          RAF3L21-VT145
                                                                                                                    RAF3
                                          R1-PL

STANDARD FINISH IS POLISH                                               RIGHT HAND             LEFT HAND
Motor & Model       Year                  Blds/Dia/Pitch/Cup             PART NO.     UPC#      PART NO.     UPC#

“E CLASS” LARGE
                              MS275       3BL 14.25 x 15P C           RAS3R15-MS275          RAS3L15-MS275
                                          3BL 14.25 x 17P C           RAS3R17-MS275          RAS3L17-MS275
                                          3BL 14.25 x 19P C           RAS3R19-MS275          RAS3L19-MS275
                                          3BL 14.25 x 21P C           RAS3R21-MS275          RAS3L21-MS275
                                          3BL 14.25 x 23P C           RAS3R23-MS275          RAS3L23-MS275
                                                                                                                    RAS3
                                          R2-PL
*RAPTURE® is a registered trademaerk of Michigan Wheel Corporation.



                                   4 BLADE R-SERIES AVAILABLE!

                                                                                                                           39
                                                               SUZUKI*
STANDARD FINISH IS POLISH                                            RIGHT HAND                    LEFT HAND
Motor & Model       Year                  Blds/Dia/Pitch/Cup          PART NO.         UPC#         PART NO.         UPC#
“A CLASS” SMALL PORTABLES 9.9-18HP 2.75” GEARCASE
                                   SZ15   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
DT 9.9-18               86 Thru           3BL 9.25 x 9P No        SRT3R9-SZ15     192939
Thru-Hub                                  3BL 9.25 x 10P No       SRT3R10-SZ15    192940
Will not Fit 9.9 Oil Injected             3BL 9.25 x 11P No       SRT3R11-SZ15    192941
                                          B4A-ST
                                          B5A-PL
                                                                                                                            SRT3
“B CLASS” COMPACTS/TILLER MODELS THRU-HUB EXHAUST 20-30HP 3” GEARCASE
DT 20-25-30 HP        83 Thru      SZ30   MULTI-USE SERIES BEST ALL-PURPOSE PROPS - MAY REQUIRE TRIM TAB CLEARANCE
                                          3BL 10.38 x 12P C          REB3R12-SZ30      200542
                                          3BL 10.38 x 13P C          REB3R13-SZ30      200543
                                          3BL 10.25 x 14P C          REB3R14-SZ30      200544
NOTE: REQUIRES 57632-96400                3BL 10.25 x 15P C          REB3R15-SZ30      200545
THRUST HUB WHICH WAS                      3BL 10.25 x 16P C          REB3R16-SZ30      200546
FURNISHED WITH MOTOR                      B7-ST                                                                             REB3
ON 1986 AND NEWER MOTORS                  B9-PL

                                          LOW RAKE OEM EQUIVALENT
                                          3BL 10.25 x 12P C     SLR3R12-SZ30          200242
                                          3BL 10.25 x 13P C     SLR3R13-SZ30          200243
                                          3BL 10.25 x 14P C     SLR3R14-SZ30          200244
                                          S5A-ST
                                          S7A-PL
                                                                                                                            SLR3
                                          SPEED PROPS - MAY REQUIRE TRIM TAB CLEARANCE
                                          3BL 10.375 x 13P C     SCB3R13-SZ30     201843
                                          3BL 10.375 x 14P C     SCB3R14-SZ30     201844
                                          3BL 10.375 x 15P C     SCB3R15-SZ30     201845
                                          3BL 10.375 x 16P C     SCB3R16-SZ30     201846
                                          B11-ST
                                          B14-PL                                                                            SCB3

“C CLASS” MID SIZE 35-65HP 3.5” GEARCASE W/THRU HUB EXHAUST
DT35-65 WITH                       YS50   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
3.5” GEARCASE                             3BL 12.00 x 9P No      WBA3R9-YS50      311339
                                          3BL 12.00 x 11P No    WBA3R11-YS50      311341
                                          3BL 12.00 x 13P No    WBA3R13-YS50      311343
                                          B11-ST
                                          B14-PL


                  }
                                                                                                                            WBA3
Larger Motors &                           MULTI-USE SERIES BEST ALL PURPOSE PROPS
Heavier Loads                             3BL 11.25 x 11P C       SRD3R11-YS50    311041




                                     {
                                          3BL 11.25 x 12P C       SRD3R12-YS50    311042
                  Best Value For          3BL 11.25 x 13P C       SRD3R13-YS50    311043
                    Standard              3BL 11.25 x 14P C       SRD3R14-YS50    311044
                   Applications           3BL 11.25 x 15P C       SRD3R15-YS50    311045
                                          3BL 11.25 x 16P C       SRD3R16-YS50    311046                                    SRD3
                                          3BL 11.25 x 17P C       SRD3R17-YS50    311047
                                          B8-ST
                                          B10-PL



    40
                                                 SUZUKI* (Continued)
STANDARD FINISH IS POLISH                                            RIGHT HAND                   LEFT HAND
Motor & Model       Year                   Blds/Dia/Pitch/Cup         PART NO.        UPC#         PART NO.        UPC#
“C CLASS” MID SIZE 35-65HP 3.5” GEARCASE W/THRU HUB EXHAUST - CONT.
                                   YS50    MULTI-USE SERIES BEST ALL PURPOSE PROPS
                                  CONT.    3BL 10.75 x 12P C       SRC3R12-YS50    310942
                                           B10-ST
                                           B11-PL
                                                                                                                            SRC3

Smaller Motors
& Lighter Loads   }                        3BL 10.38 x 13P C
                                           3BL 10.25 x 14P C
                                           3BL 10.25 x 15P C
                                                                    REB3R13-YS50
                                                                    REB3R14-YS50
                                                                    REB3R15-YS50
                                                                                      310543
                                                                                      310544
                                                                                      310545
                                           3BL 10.25 x 16P C        REB3R16-YS50      310546
                                           B8-ST
                                           B9-PL                                                                            REB3

                                           SPEED PROPS - SEMICLEAVER
                                           3BL 10.375 x 13P      SCB3R13-YS50         311843
                                           3BL 10.375 x 14P      SCB3R14-YS50         311844
                                           3BL 10.375 x 15P      SCB3R15-YS50         311845
                                           3BL 10.375 x 16P      SCB3R16-YS50         311846
                                           B11-ST
                                           B14-PL                                                                           SCB3

                                           FOUR BLADE ACCELERATOR
                                   FOUR    4BL 10.375 x 13P C   SCB4R13-YS50          311943
                                  BLADE    4BL 10.375 x 15P C   SCB4R15-YS50          311945
                                           B17-ST
                                           B19-PL


                                                                                                                            SCB4
“D CLASS” INTERMEDIATE 3/4 CYL INLINE & V4 DT60-140HP 4.25” GEARCASE
60-140HP              All Years    SZ140   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT

2 Stroke motors only                       3BL 14.00 x 11P C       WBH3R11-SZ140      212241
                                           3BL 14.00 x 13P C       WBH3R13-SZ140      212243
                                           B17-ST
                                           B19-PL                                                                           WBH3




                                      {
                                           VALUE LINE ALL-PURPOSE PROPS - EQUIVALENT TO RAPTURE, BALLISTIC, STILETTO
                                           3BL 13.25 x 15P C       RED3R15-SZ140      210745   RED3L15-SZ140
                  Best Value For           3BL 13.25 x 17P C       RED3R17-SZ140      210747   RED3L17-SZ140       210447
                    Standard               3BL 13.25 x 19P C       RED3R19-SZ140      210749   RED3L19-SZ140       210449
                   Applications            3BL 13.25 x 21P C       RED3R21-SZ140      210751   RED3L21-SZ140
                                           S11-ST                                                                           RED3
 60-70 HP 2-STROKE                         S12-PL

  & 4-STROKE USE                           LIFTER SERIES BOWLIFTING PROPS - MORE LIFT THAN OEM STAINLESS
   SZ140 FITMENT                           3BL 13.50 x 18P C      PTR3R18-SZ140     212748
                                           3BL 13.50 x 20P C      PTR3R20-SZ140     212750
                                           3BL 13.50 x 22P C      PTR3R22-SZ140     212752
                                           3BL 13.50 x 24P C      PTR3R24-SZ140     212754
                                           B14-ST                                                                           PTR3
                                           B16-PL


                                                                                                                               41
                                               SUZUKI* (Continued)
STANDARD FINISH IS POLISH                                           RIGHT HAND                     LEFT HAND
Motor & Model       Year                 Blds/Dia/Pitch/Cup          PART NO.         UPC#          PART NO.        UPC#
“D CLASS” INTERMEDIATE 3/4 CYL INLINE & V4 DT60-140HP 4.25” GEARCASE - CONT.
60-140HP            All Years    SZ140   ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”) - 4 BLADE
2 Stroke motors only             FOUR    4BL 13.25 x 15P C       RXB4R15-SZ140     213645     RXB4L15-SZ140
                                BLADE    4BL 13.25 x 17P C       RXB4R17-SZ140     213647     RXB4L17-SZ140
                                         4BL 13.25 x 19P C       RXB4R19-SZ140     213649     RXB4L19-SZ140
                                         4BL 13.25 x 21P C       RXB4R21-SZ140     213651     RXB4L21-SZ140
                                         B19-ST
                                         B21-PL                                                                            RXB4

                                 FOUR    FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
                                BLADE    4BL 13.00 x 14P C       PFS4R14-SZ140     213244
                                         4BL 13.00 x 15P C       PFS4R15-SZ140     213245
                                         4BL 13.00 x 16P C       PFS4R16-SZ140     213246
                                         B19-ST
                                         B21-PL                                                                            PFS4

“D CLASS” INTERMEDIATE 4 STROKE LARGE DIAMETER PROPS 4.25” GEARCASE
90,115,140HP                    SF115    THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
4 Stroke Only       01 Thru              3BL 14.00 x 11P C     WBH3R11-SF115     532241
                                         3BL 14.00 x 13P C     WBH3R13-SF115     532243
                                         B17-ST
                                         B19-PL
                                                                                                                           WBH3

                                         LIFTER SERIES
                                         3BL 13.75 x 15P C        MQF3R15-SF115      532745




                                         3BL 13.50 x 17P C        PTR3R17-SF115      532747                                MQF3
                                         3BL 13.50 x 19P C        PTR3R19-SF115      532749
                                         3BL 13.50 x 21P C        PTR3R21-SF115      532751
                                         3BL 13.50 x 23P C        PTR3R23-SF115      532753
                                         B13-ST
                                         B14-PL

                                 FOUR    LIFTER FOUR SERIES                                                                PTR3
                                BLADE    4BL 13.50 x 15P C        PTR4R15-SF115      537545
                                         4BL 13.50 x 17P C        PTR4R17-SF115      537547
                                         4BL 13.50 x 19P C        PTR4R19-SF115      537549
                                         4BL 13.50 x 21P C        PTR4R21-SF115      537551
                                         4BL 13.50 x 23P C        PTR4R23-SF115      537553
                                         B19-ST
                                         B21-PL                                                                            PTR4

                                         SST STYLE SWEPT BLADE - 3 BLADE
                                         3BL 14.00 x 15P C      OSN3R15-SF115
                                         3BL 14.00 x 17P C      OSN3R17-SF115
                                         3BL 14.00 x 19P C      OSN3R19-SF115
                                         3BL 14.00 x 21P C      OSN3R21-SF115
                                         S13-ST
                                         S14-PL                                                                            OSN3


   42
                                           SUZUKI* (Continued)
STANDARD FINISH IS POLISH                                       RIGHT HAND                    LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup          PART NO.        UPC#          PART NO.         UPC#
“D CLASS” INTERMEDIATE 4 STROKE LARGE DIAMETER PROPS 4.25” GEARCASE - CONT.
90,115,140HP                 SF115   SST STYLE SWEPT BLADE - 4 BLADE
4 Stroke Only     01 Thru    FOUR    4BL 14.00 x 15P C      OSN4R15-SF115
                            BLADE    4BL 14.00 x 17P C      OSN4R17-SF115
                                     4BL 14.00 x 19P C      OSN4R19-SF115
     NEW!                            4BL 14.00 x 21P C      OSN4R21-SF115
 14” Diameter                        S23-ST
   4-BLADE                           S24-PL                                                                            OSN4

                             FOUR    FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION
                            BLADE    4BL 14.00 x 16P C     PFO4R16-SF115
                                     4BL 14.00 x 18P C     PFO4R18-SF115
                                     4BL 14.00 x 20P C     PFO4R20-SF115
                                     B19 ST
                                     B21 PL
                                                                                                                       PFO4

“E CLASS” V-6 DT150-225HP 4.75” GEARCASE 150-225HP
DT 2 Stroke Motors          CLS200   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
150-225HP         All Years          3BL 15.50 x 11P C    WBB3R11-CLS200     381441 WBB3L11-CLS200
                                     3BL 15.50 x 13P C    WBB3R13-CLS200     381443 WBB3L13-CLS200
                                     B18-ST
                                     B20-PL
                                                                                                                       WBB3
                                     LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, BALLISTIC, STILETTO
                                     3BL 14.25 x 15P C      PTC3R15-CLS200      385645    PTC3L15-CLS200      384945
                                     3BL 14.25 x 17P C      PTC3R17-CLS200      385647    PTC3L17-CLS200      384947
                                     3BL 14.25 x 19P C      PTC3R19-CLS200      385649    PTC3L19-CLS200      384949
                                     3BL 14.25 x 21P C      PTC3R21-CLS200      385651    PTC3L21-CLS200      384951
                                     3BL 14.25 x 23P C      PTC3R23-CLS200      385653    PTC3L23-CLS200      384953
                                     B14-ST                                                                            PTC3
                                     B15-PL

                                     FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
                             FOUR    4BL 14.50 x 15P C      PFL4R15-CLS200    386345
                            BLADE    4BL 14.50 x 16P C      PFL4R16-CLS200    386346
                                     4BL 14.50 x 17P C      PFL4R17-CLS200    386347
                                     B21-ST
                                     B24-PL                                                                            PFL4

                             FOUR    SKI MAX FOUR/FLATS MODERATE CUP/OFFSHORE FOUR (REDUCE PITCH 1-2”)
                            BLADE    4BL 14.25 x 17P C     PTC4R17-CLS200  382447    PTC4L17-CLS200    382847
                                     4BL 14.25 x 19P C     PTC4R19-CLS200  382449    PTC4L19-CLS200    382849
                                     4BL 14.25 x 21P C     PTC4R21-CLS200  382451    PTC4L21-CLS200    382851
                                     B21-ST
                                     B24-PL                                                                            PTC4




                                                                                                                          43
                                           SUZUKI* (Continued)
STANDARD FINISH IS POLISH                                      RIGHT HAND                    LEFT HAND
Motor & Model       Year             Blds/Dia/Pitch/Cup         PART NO.         UPC#         PART NO.        UPC#
“E CLASS” V-6 DT150-225HP 4.75” GEARCASE 150-225HP - CONT.
DT 2 Stroke Motors          CLS200   OFFSHORE SERIES PROPS - 3 BLADE OFFSHORE
150-225HP         All Years          3BL 15.25 x 15P C    OFS3R15-CLS200    385145        OFS3L15-CLS200     385245
                                     3BL 15.25 x 17P C    OFS3R17-CLS200    385147        OFS3L17-CLS200     385247
                                     3BL 15.25 x 19P C    OFS3R19-CLS200    385149        OFS3L19-CLS200     385249
                                     3BL 15.25 x 21P C    OFS3R21-CLS200    385151        OFS3L21-CLS200     385251
                                     3BL 15.25 x 23P C    OFS3R23-CLS200    385153        OFS3L23-CLS200     385253
                                     3BL 15.25 x 25P C    OFS3R25-CLS200    385155        OFS3L25-CLS200     385255    OFS3
                                     3BL 15.25 x 27P C    OFS3R27-CLS200    385157        OFS3L27-CLS200     385257
                                     B21-ST
                                     B24-PL

                                     OFFSHORE SERIES PROPS - 4 BLADE OFFSHORE
NOTE: ALL SUZUKI V6          FOUR    4BL 15.25 x 15P C    OFS4R15-CLS200    385345        OFS4L15-CLS200     385445
USING “UN” SERIES           BLADE    4BL 15.25 x 17P C    OFS4R17-CLS200    385347        OFS4L17-CLS200     385447
PROPS MUST ORDER                     4BL 15.25 x 19P C    OFS4R19-CLS200    385349        OFS4L19-CLS200     385449
UNSZ KIT (NO CHARGE)                 4BL 15.25 x 21P C    OFS4R21-CLS200    385351        OFS4L21-CLS200     385451
                                     4BL 15.25 x 23P C    OFS4R23-CLS200    385353        OFS4L23-CLS200     385453
                                     4BL 15.25 x 25P C    OFS4R25-CLS200    385355        OFS4L25-CLS200     385455    OFS4
                                     4BL 15.25 x 27P C    OFS4R27-CLS200    385357        OFS4L27-CLS200     385457
                                     B27-ST
                                     B31-PL

                                     HIGH PERFORMANCE OFFSHORE LIFTER SERIES
                             FOUR    4BL 15.25 x 15P C   OFX4R15-CLS200    557645         OFX4L15-CLS200     557745
                            BLADE    4BL 15.25 x 17P C   OFX4R17-CLS200    557647         OFX4L17-CLS200     557747
                                     4BL 15.25 x 19P C   OFX4R19-CLS200    557649         OFX4L19-CLS200     557749
                                     4BL 15.25 x 21P C   OFX4R21-CLS200    557651         OFX4L21-CLS200     557751
                                     4BL 15.25 x 23P C   OFX4R23-CLS200    557653         OFX4L23-CLS200     557753
                                     4BL 15.25 x 25P C   OFX4R25-CLS200    557655         OFX4L25-CLS200     557755    OFX4
                                     4BL 15.25 x 27P C   OFX4R27-CLS200    557657         OFX4L27-CLS200     557757
                                     B27-ST
                                     B31-PL

“E CLASS” V-6 DF150-300HP 4.75” GEARCASE 150-300HP
DF 4 Stroke Motors          CLS200   LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, BALLISTIC, STILETTO
150-300HP         All Years          3BL 14.25 x 15P C      PTC3R15-CLS200      385645    PTC3L15-CLS200      384945
                                     3BL 14.25 x 17P C      PTC3R17-CLS200      385647    PTC3L17-CLS200      384947
    150-175HP                        3BL 14.25 x 19P C      PTC3R19-CLS200      385649    PTC3L19-CLS200      384949
 GENERALLY USE                       3BL 14.25 x 21P C      PTC3R21-CLS200      385651    PTC3L21-CLS200      384951
  14.00”-15.25”                      3BL 14.25 x 23P C      PTC3R23-CLS200      385653    PTC3L23-CLS200      384953
    DIAMETER                         B14-ST
   PROPELLER                                                                                                           PTC3
                                     B15-PL

                             FOUR    SKI MAX FOUR/FLATS MODERATE CUP/OFFSHORE FOUR (REDUCE PITCH 1-2”)
                            BLADE    4BL 14.25 x 17P C     PTC4R17-CLS200  382447    PTC4L17-CLS200          382847
    200-250HP                        4BL 14.25 x 19P C     PTC4R19-CLS200  382449    PTC4L19-CLS200          382849
 GENERALLY USE                       4BL 14.25 x 21P C     PTC4R21-CLS200  382451    PTC4L21-CLS200          382851
   15.25” - 16”                      4BL 14.25 x 23P C     PTC4R23-CLS200  382453    PTC4L23-CLS200          382853
    DIAMETER                         4BL 14.25 x 25P C     PTC4R25-CLS200  382455    PTC4L25-CLS200          382855
   PROPELLER
                                     B21-ST                                                                            PTC4
                                     B24-PL


   44
                                            SUZUKI* (Continued)
 STANDARD FINISH IS POLISH                                    RIGHT HAND                 LEFT HAND
 Motor & Model       Year             Blds/Dia/Pitch/Cup       PART NO.       UPC#        PART NO.      UPC#
 “E CLASS” V-6 DF150-300HP 4.75” GEARCASE 150-300HP - CONT.
 DF 4 Stroke Motors          CLS200   OFFSHORE SERIES PROPS - 3 BLADE
 150-300HP         All Years          3BL 15.25 x 15P C    OFS3R15-CLS200     385145   OFS3L15-CLS200   385245
                                      3BL 15.25 x 17P C    OFS3R17-CLS200     385147   OFS3L17-CLS200   385247
                                      3BL 15.25 x 19P C    OFS3R19-CLS200     385149   OFS3L19-CLS200   385249
   WHEN COMPARING 16”
                                      3BL 15.25 x 21P C    OFS3R21-CLS200     385151   OFS3L21-CLS200   385251
  DIAMETER OEM FITMENTS
                                      3BL 15.25 x 23P C    OFS3R23-CLS200     385153   OFS3L23-CLS200   385253
  TO OFS3, ADD 2” OF PITCH            3BL 15.25 x 25P C    OFS3R25-CLS200     385155   OFS3L25-CLS200   385255
 TO EQUALIZE ENGINE REVS,                                                                                        OFS3
                                      3BL 15.25 x 27P C    OFS3R27-CLS200     385157   OFS3L27-CLS200   385257
  FOR THE OFS4, ADD ONLY              B21-ST
        1” OF PITCH                   B24-PL

                                      OFFSHORE SERIES PROPS - 4 BLADE
                              FOUR    4BL 15.25 x 15P C    OFS4R15-CLS200     385345   OFS4L15-CLS200   385445
                             BLADE    4BL 15.25 x 17P C    OFS4R17-CLS200     385347   OFS4L17-CLS200   385447
                                      4BL 15.25 x 19P C    OFS4R19-CLS200     385349   OFS4L19-CLS200   385449
                                      4BL 15.25 x 21P C    OFS4R21-CLS200     385351   OFS4L21-CLS200   385451
                                      4BL 15.25 x 23P C    OFS4R23-CLS200     385353   OFS4L23-CLS200   385453
                                      4BL 15.25 x 25P C    OFS4R25-CLS200     385355   OFS4L25-CLS200   385455   OFS4
                                      4BL 15.25 x 27P C    OFS4R27-CLS200     385357   OFS4L27-CLS200   385457




                        {
                                      B27-ST
                                      B31-PL

                                      16” DIAMETER PERFORMANCE OFFSHORE - 3 BLADE
                                      3BL 16 x 17P C       LFS3R17-CLS200              LFS3L17-CLS200
                                      3BL 16 x 19P C       LFS3R19-CLS200              LFS3L19-CLS200
                                      3BL 16 x 21P C       LFS3R21-CLS200              LFS3L21-CLS200
      16”                             3BL 16 x 23P C       LFS3R23-CLS200              LFS3L23-CLS200
                                      B17B-PL

DIAMETER                                                                                                         LFS3

                                      16” DIAMETER PERFORMANCE OFFSHORE - 4 BLADE
                              FOUR    4BL 16 x 17P C       LFS4R17-CLS200              LFS4L17-CLS200
     OEM                     BLADE    4BL 16 x 19P C       LFS4R19-CLS200              LFS4L19-CLS200
                                      4BL 16 x 21P C       LFS4R21-CLS200              LFS4L21-CLS200
                                      4BL 16 x 23P C       LFS4R23-CLS200
EQUIVALENT                            B31-PL
                                                                                       LFS4L23-CLS200


                                                                                                                 LFS4

                                      HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 3 BLADE
                                      3BL 15.25 x 15P C   OFX3R15-CLS200               OFX3L15-CLS200
                                      3BL 15.25 x 17P C   OFX3R17-CLS200               OFX3L17-CLS200
                                      3BL 15.25 x 19P C   OFX3R19-CLS200               OFX3L19-CLS200
                                      3BL 15.25 x 21P C   OFX3R21-CLS200               OFX3L21-CLS200
                                      3BL 15.25 x 23P C   OFX3R23-CLS200               OFX3L23-CLS200
                                      3BL 15.25 x 25P C   OFX3R25-CLS200               OFX3L25-CLS200            OFX3
                                      3BL 15.25 x 27P C   OFX3R27-CLS200               OFX3L27-CLS200
                                      B21-ST
                                      B24-PL




                                                                                                                    45
                                            SUZUKI* (Continued)
STANDARD FINISH IS POLISH                                      RIGHT HAND                  LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup        PART NO.        UPC#        PART NO.    UPC#
“E CLASS” V-6 DF150-300HP 4.75” GEARCASE 150-300HP - CONT.
DF 4 Stroke Motors          CLS200    HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 4 BLADE
150-300HP         All Years FOUR      4BL 15.25 x 15P C   OFX4R15-CLS200    557645     OFX4L15-CLS200   557745
                            BLADE     4BL 15.25 x 17P C   OFX4R17-CLS200    557647     OFX4L17-CLS200   557747
                                      4BL 15.25 x 19P C   OFX4R19-CLS200    557649     OFX4L19-CLS200   557749
                                      4BL 15.25 x 21P C   OFX4R21-CLS200    557651     OFX4L21-CLS200   557751
                                      4BL 15.25 x 23P C   OFX4R23-CLS200    557653     OFX4L23-CLS200   557753
                                      4BL 15.25 x 25P C   OFX4R25-CLS200    557655     OFX4L25-CLS200   557755     OFX4
                                      4BL 15.25 x 27P C   OFX4R27-CLS200    557657     OFX4L27-CLS200   557757
                                      B27-ST
                                      B31-PL

                                      HIGH PERFORMANCE BASS/BAY SERIES BOWLIFTING PROPS–SIMILAR TO YAMAHA VX-MAX
                                      3BL 15.25 x 23P C    VMX3R23-CLS200
                                      3BL 15.25 x 25P C    VMX3R25-CLS200
                                      3BL 15.25 x 27P C    VMX3R27-CLS200
                                      B21-ST
                                      B24-PL
                                                                                                                   VMX3

                                           TOHATSU / NISSAN*
STANDARD FINISH IS POLISH                                      RIGHT HAND                  LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup        PART NO.        UPC#        PART NO.    UPC#
“A CLASS” SMALL PORTABLES 9.9-18HP 2.75” GEARCASE
9.9HP                87 Thru   TN15   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
Thru-Hub                              3BL 9.25 x 9P No        SWA3R9-TN15     231739
(Will not fit 1999 &                  3BL 9.25 x 10P No       SWA3R10-TN15    231740
Newer Model 9.8HP!)                   3BL 9.25 x 11P No       SWA3R11-TN15    231741
                                      B4-ST
                                      B6-PL                                                                        SWA3

15-18               87 Thru    TN15   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
Thru-Hub                              3BL 9.50 x 9P No        SRT3R9-TN15     232339
                                      3BL 9.50 x 10P No       SRT3R10-TN15    232340
                                      3BL 9.50 x 11P No       SRT3R11-TN15    232341
                                      B4-ST
                                      B6-PL
                                                                                                                   SRT3

“B CLASS” COMPACTS/TILLER MODELS THRU-HUB EXHAUST 25-30HP 3” GEARCASE
25-30 HP            84 Thru    TN30   HIGH RAKE SERIES - TRIM TAB MODIFICATION MAY BE REQUIRED
High Rake-Trim                        3BL 10.00 x 10P C        SRA3R10-TN30     470840
Tab Modification                      3BL 10.00 x 11P C        SRA3R11-TN30     470841
May Be Required.                      3BL 10.00 x 12P C        SRA3R12-TN30     470842
                                      3BL 10.00 x 13P C        SRA3R13-TN30     470843
                                      3BL 10.00 x 14P C        SRA3R14-TN30     470844
                                      3BL 10.00 x 15P C        SRA3R15-TN30     470845                             SRA3
                                      B6-ST
                                      B7-PL




   46
                                  TOHATSU / NISSAN* (Continued)
STANDARD FINISH IS POLISH                                      RIGHT HAND                LEFT HAND
Motor & Model       Year               Blds/Dia/Pitch/Cup       PART NO.        UPC#      PART NO.      UPC#
“B CLASS” COMPACTS/TILLER MODELS THRU-HUB EXHAUST 25-30HP 3” GEARCASE
25-30 HP             84 Thru    TN30   LOW RAKE ECONOMY SERIES
Uses Factory Hub                       3BL 10.00 x 10P C     TLR3R10-TN30      472340
and Hardware.                          3BL 10.00 x 11P C     TLR3R11-TN30      472341
No Trim Tab Alteration                 3BL 10.00 x 12P C     TLR3R12-TN30      472342
Required.                              3BL 10.00 x 13P C     TLR3R13-TN30      472343
                                       3BL 10.00 x 14P C     TLR3R14-TN30      472344                          TLR3
                                       B4A-ST
                                       B5B-PL
    SPECIAL LOW
    PITCH PROPS   FOUR                 FOUR BLADE ACCELERATOR
   AVAILABLE FOR BLADE                 4BL 10.00 x 13P      SRA4R13-TN30       243043
 4 STROKE MOTORS                       B13-ST
                                       B14-PL                                                                  SRA4

“C CLASS” MID SIZE 40-70HP 3.5” GEARCASE W/THRU HUB EXHAUST
40 HP 2 & 3 Cyl     84 Thru     TN40   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
                                       3BL 11.62 x 9P No      WBG3R9-TN40      251539
                                       3BL 11.62 x10P No     WBG3R10-TN40      251540
                                       B10-ST
                                       B14-PL
                                                                                                               WBG3

                                       MULTI-USE SERIES BEST ALL-PURPOSE PROPS
                                       3BL 10.75 x 11P C       SRC3R11-TN40    250941
                                       3BL 10.75 x 12P C       SRC3R12-TN40    250942
                                       B10-ST
                                       B11-PL
                                                                                                               SRC3

                                       3BL 10.25 x 13P C      REB3R13-TN40     250543
                                       3BL 10.25 x 14P C      REB3R14-TN40     250544
                                       3BL 10.25 x 15P C      REB3R15-TN40     250545
                                       3BL 10.25 x 16P C      REB3R16-TN40     250546
                                       B5A-ST
                                       B7-PL                                                                   REB3

                                       SPEED PROPELLERS
                                       3BL 10.375 x 13P C     SCB3R13-TN40     251843
                                       3BL 10.375 x 14P C     SCB3R14-TN40     251844
                                       3BL 10.375 x 15P C     SCB3R15-TN40     251845
                                       3BL 10.375 x 16P C     SCB3R16-TN40     250546
                                       B11-ST
                                       B14-PL                                                                  SCB3

                                       FOUR BLADE ACCELERATOR SERIES
                                FOUR   4BL 10.375 x 13P C   SCB4R13-TN40       251943
                               BLADE   4BL 10.375 x 15P C   SCB4R15-TN40       251945
                                       B17-ST
                                       B19-PL
                                                                                                               SCB4



                                                                                                                  47
                                    TOHATSU / NISSAN* (Continued)
STANDARD FINISH IS POLISH                                        RIGHT HAND                LEFT HAND
Motor & Model       Year                 Blds/Dia/Pitch/Cup       PART NO.        UPC#      PART NO.      UPC#
“C CLASS” MID SIZE 40-70HP 3.5” GEARCASE W/THRU HUB EXHAUST - CONT.
50 HP 3 Cyl          91 Thru      TN40   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
                                         3BL 11.62 x 9P No      WBG3R9-TN40      251539
                                         3BL 11.62 x 11P No    WBG3R11-TN40      251541
                                         B10-ST
                                         B14-PL


                                                                                                                 WBG3
                                         MULTI-USE SERIES BEST ALL-PURPOSE PROPS
                                         3BL 11.25 x 12P C       SRD3R12-TN40    251042
                                         3BL 11.25 x 13P C       SRD3R13-TN40    251043
                                         3BL 11.25 x 14P C       SRD3R14-TN40    251044
                                         3BL 11.25 x 15P C       SRD3R15-TN40    251045
                                         B10-ST
                                         B11-PL                                                                  SRD3

                                         MULTI-USE SERIES BEST ALL-PURPOSE PROPS
                     For Light           3BL 10.25 x 15P C       REB3R15-TN40    250545
                    Loads Only           3BL 10.25 x 16P C       REB3R16-TN40    250546
                                         B5A-ST
                                         B7-PL
                                                                                                                 REB3
                                         SPEED PROPELLERS - SEMICLEAVER
                                         3BL 10.375 x 13P C     SCB3R13-TN40     251843
                                         3BL 10.375 x 14P C     SCB3R14-TN40     251844
                                         3BL 10.375 x 15P C     SCB3R15-TN40     251845
                                         3BL 10.375 x 16P C     SCB3R16-TN40     251846
                                         B11-ST
                                         B14-PL                                                                  SCB3

                                         FOUR BLADE ACCELERATOR SERIES
                                  FOUR   4BL 10.375 x 13P C   SCB4R13-TN40       251943
                                 BLADE   4BL 10.375 x 15P C   SCB4R15-TN40       251945
                                         B17-ST
                                         B19-PL
                                                                                                                 SCB4
50-55-70 HP 2 Cyl                 TN60   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
60 HP 3 Cyl                              3BL 11.25 x 11P C       SRD3R11-TN60    271041
                                         3BL 11.25 x 13P C       SRD3R13-TN60    271043
                                         3BL 11.25 x 15P C       SRD3R15-TN60    271045
                                         3BL 11.25 x 17P C       SRD3R17-TN60    271047
                                         B5A-ST
                                         B7-PL                                                                   SRD3

70 HP 3 Cyl         93 Thru 98    OM50   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
                                         3BL 12.50 x 13P C       SRG3R13-OM50    151143
                                         3BL 12.25 x 15P C       SRG3R15-OM50    151145
                                         3BL 11.75 x 17P C       SRG3R17-OM50    151147
                                         B5A-ST
                                         B9-PL                                                                   SRG3




   48
                                 TOHATSU / NISSAN* (Continued)
STANDARD FINISH IS POLISH                                         RIGHT HAND                     LEFT HAND
Motor & Model       Year              Blds/Dia/Pitch/Cup           PART NO.         UPC#          PART NO.          UPC#
“D CLASS” INTERMEDIATE 3/4 CYL 70-140HP 4.25” GEARCASE
85-140 HP       2000 thru      TN90   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON + WORKBOAT
70HP            1999-2000             3BL 14.00 x 11P C     WBH3R11-TN90      282241
                                      3BL 14.00 x 13P C     WBH3R13-TN90      282243
                                      B17-ST
                                      B19-PL
                                                                                                                             WBH3




                                 {
                                      MULTI USE-SERIES BEST ALL-PURPOSE PROPS - SIMILAR TO OEM, RAPTURE, STILETTO
                                      3BL 13.25 x 15P C          RED3R15-TN90      280745      RED3L15-TN90         280445
              Best Value For          3BL 13.25 x 17P C          RED3R17-TN90      280747      RED3L17-TN90         280447
                Standard              3BL 13.25 x 19P C          RED3R19-TN90      280749      RED3L19-TN90         280449
               Applications           3BL 13.25 x 21P C          RED3R21-TN90      280751      RED3L21-TN90         280451
                                      T11-ST
                                      T12-PL                                                                                 RED3

                                      OEM EQUIVALENT STERNLIFTER - LOW RAKE - NEAREST OEM ALUMINUM EQUIVALENT
                                      3BL 13.75 x 13P C     MQF3R13-TN90       282643
                                      3BL 13.75 x 15P C     MQF3R15-TN90       282645
 NOTE: FOR 2001 AND
                                      B14-ST
 NEWER MODELS
                                      B15-PL
 WITH MERCURY
 WASHER, USE M135
                                                                                                                             MQF3
 PREFIX PROPS, WE                     LIFTER SERIES BOWLIFTING PROPS - MORE LIFT THAN OEM STAINLESS
 ALSO OFFER A                         3BL 13.50 x 18P C       PTR3R18-TN90     282748
                                      3BL 13.50 x 20P C       PTR3R20-TN90     282750
 VALUEPRICED
                                      3BL 13.50 x 22P C       PTR3R22-TN90     282752
 THRUSTWASHER &
                                      3BL 13.50 x 24P C       PTR3R24-TN90     282754
 PROPNUT KIT                          B14-ST
                                      B16-PL                                                                                 PTR3

                                      ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”) - 4 BLADE
                                      GENERAL PURPOSE
                             FOUR     4BL 13.25 x 15P C      RXB4R15-TN90     283645
                            BLADE     4BL 13.25 x 17P C      RXB4R17-TN90     283647
                                      4BL 13.25 x 19P C      RXB4R19-TN90     283649
                                      4BL 13.25 x 21P C      RXB4R21-TN90     283651
                                      B19-ST                                                                                 RXB4
                                      B21-PL

                                      FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
                             FOUR     4BL 13.00 x 14P C      PFS4R14-TN90     283244
                            BLADE     4BL 13.00 x 15P C      PFS4R15-TN90     283245
                                      4BL 13.00 x 16P C      PFS4R16-TN90     283246
                                      B19-ST
                                      B21-PL                                                                                 PFS4




                                                                                                                                49
                                  VOLVO - PENTA STERN DRIVES*
STANDARD FINISH IS POLISH                                        RIGHT HAND                  LEFT HAND
Motor & Model       Year               Blds/Dia/Pitch/Cup         PART NO.       UPC#         PART NO.   UPC#
“E CLASS” V6/V8 SX DRIVES 4.75” GEARCASE WITH 19 SPLINE SHAFT



                                 {
All Volvo SX Drives            VO250   OEM EQUIVALENT STERNLIFTING PROPS - SIMILAR TO SST SERIES
OMC COBRA 19 Splines                   3BL 15.00 x 15P C     OSS3R15-VO250      493945
                 Best Value For        3BL 15.00 x 17P C     OSS3R17-VO250      483947
                    Standard           3BL 14.50 x 19P C     OSS3R19-VO250      483949
                  Applications         3BL 14.25 x 21P C     OSS3R21-VO250      483951
                                       B13-ST                                                                   OSS3
                                       B15-PL

                             CLV200    LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, BALLISTIC
                                       3BL 14.25 x 15P C      PTC3R15-CLV200     415645
                                       3BL 14.25 x 17P C      PTC3R17-CLV200     415647
                                       3BL 14.25 x 19P C      PTC3R19-CLV200     415649
                                       3BL 14.25 x 21P C      PTC3R21-CLV200     415651
                                       B14-ST                                                                   PTC3
                                       B15-PL

                                       SKI MAX FOUR
                              FOUR     4BL 14.25 x 17P C       MQS4R17-CLV200   413447
                             BLADE     4BL 14.25 x 19P C       MQS4R19-CLV200   413449
                                       4BL 14.25 x 21P C       MQS4R21-CLV200   413451
VOLVO DUO (TM*)-                       B21-ST
  OEM MATCH                            B24-PL                                                                   MQS4

 PROPELLERS                            “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 3 BLADE
                                       3BL 14.25 x 17P C      SFS3R17-CLV200
  AVAILABLE                            3BL 14.25 x 19P C      SFS3R19-CLV200
A3, A4, A5, A6, A7                     3BL 14.25 x 21P C      SFS3R21-CLV200
                                       3BL 14.25 x 23P C      SFS3R23-CLV200
 B3, B4, B5, B6                        B16-ST
                                       B18-PL                                                                   SFS3

                                       “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 4 BLADE
                              FOUR     4BL 14.25 x 17P C      SFS4R17-CLV200
                             BLADE     4BL 14.25 x 19P C      SFS4R19-CLV200
                                       4BL 14.25 x 21P C      SFS4R21-CLV200
                                       4BL 14.25 x 23P C      SFS4R23-CLV200
                                       B21-ST
                                       B24-PL                                                                   SFS4



                                                            YAMAHA*
STANDARD FINISH IS POLISH                                        RIGHT HAND                  LEFT HAND
Motor & Model       Year               Blds/Dia/Pitch/Cup         PART NO.       UPC#         PART NO.   UPC#
“A CLASS” SMALL PORTABLES 9.9-15HP 2.75” GEARCASE
                              YM15     MULTI-USE SERIES BEST ALL-PURPOSE PROPS - SEMI WEEDLESS
9.9-20 HP          84 Thru             3BL 9.25 x 9P No        SWA3R9-YM15    291739
Thru-Hub                               3BL 9.25 x 10P No       SWA3R10-YM15    291740
                                       3BL 9.25 x 11P No       SWA3R11-YM15    291741
                                       B4-ST
                                       B6-PL                                                                    SWA3



   50
                                               YAMAHA* (Continued)
STANDARD FINISH IS POLISH                                        RIGHT HAND                LEFT HAND
Motor & Model       Year                 Blds/Dia/Pitch/Cup       PART NO.        UPC#      PART NO.      UPC#
“B CLASS” COMPACTS/TILLER MODELS THRU-HUB EXHAUST 25-30HP 3” GEARCASE
                                  YM30   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
25 HP             80 Thru                3BL 10.00 x 10P C       SRA3R10-YM30    300840
28 HP              76-78                 3BL 10.00 x 11P C       SRA3R11-YM30    300841
30 HP             79 Thru                3BL 10.00 x 12P C       SRA3R12-YM30    300842
Flow-Thru Exhaust                        3BL 10.00 x 13P C       SRA3R13-YM30    300843
                                         3BL 10.00 x 14P C       SRA3R14-YM30    300844
                                         3BL 10.00 x 15P C       SRA3R15-YM30    300845                          SRA3
                                         B6-ST
                                         B7-PL

                                 FOUR    FOUR BLADE ACCELERATOR
                                BLADE    4BL 10.00 x 11P      SRA4R11-YM30       303041
                                         B13-ST
                                         B14-PL
                                                                                                                 SRA4

“C CLASS” MID SIZE 40-70HP 3.5” GEARCASE W/THRU HUB EXHAUST 2 PIN HEAD MERCURY STYLE HUB
40 HP                79-83         M70   MULTI-USE SERIES BEST ALL-PURPOSE PROPS
W48 HP              All Years            3BL 10.75 x 12P C       SRC3R12-M70     090942
60 HP                77-83               B10-ST
70 HP                78-83               B11-PL


                                                                                                                 SRC3
                                         3BL 10.38 x 13P C      REB3R13-M70      090543
                                         3BL 10.25 x 14P C      REB3R14-M70      090544
                                         3BL 10.25 x 15P C      REB3R15-M70      090545
                                         B8-ST
                                         B9-PL


                                                                                                                 REB3
“C CLASS” MID SIZE 40-60HP 3.5” GEARCASE W/THRU HUB EXHAUST
40-50-55-60 HP 84 & Newer YS50           THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
Thru-Hub Exhaust “Small Foot”            3BL 12.00 x 9P No       WBA3R9-YS50     311339
F60 4-STROKE “Small Foot”                3BL 12.00 x 11P No      WBA3R11-YS50    311341
For                                      3BL 12.00 x 13P No      WBA3R13-YS50    311343
Heavy                                    B11-ST
Loads                                    B14-PL                                                                  WBA3
                                         MULTI-USE SERIES BEST ALL PURPOSE PROPS
                                         3BL 11.25 x 11P C       SRD3R11-YS50    311041




                                    {
                                         3BL 11.25 x 12P C       SRD3R12-YS50    311042
                 Best Value For          3BL 11.25 x 13P C       SRD3R13-YS50    311043


             }
For Larger         Standard              3BL 11.25 x 14P C       SRD3R14-YS50    311044
Motors &          Applications           3BL 11.25 x 15P C       SRD3R15-YS50    311045
Moderate                                 3BL 11.25 x 16P C       SRD3R16-YS50    311046
Loads                                    3BL 11.25 x 17P C       SRD3R17-YS50    311047                          SRD3
                                         B8-ST
                                         B10-PL




                                                                                                                    51
                                              YAMAHA* (Continued)
STANDARD FINISH IS POLISH                                        RIGHT HAND                  LEFT HAND
Motor & Model       Year                Blds/Dia/Pitch/Cup        PART NO.        UPC#        PART NO.        UPC#
“C CLASS” MID SIZE 40-60HP 3.5” GEARCASE W/THRU HUB EXHAUST - CONT.
40-50-55-60 HP 84 & Newer YS50          SPEED PROPS - SEMICLEAVER
Thru-Hub Exhaust “Small Foot”           3BL 10.375 x 13P       SCB3R13-YS50      311843
F60 4-STROKE “Small Foot”               3BL 10.375 x 14P       SCB3R14-YS50      311844
                                        3BL 10.375 x 15P       SCB3R15-YS50      311845
                                        3BL 10.375 x 16P       SCB3R16-YS50      311846
                                        B11-ST
                                        B14-PL                                                                        SCB3


                                        MULTI-USE SERIES BEST ALL PURPOSE PROPS
                                        3BL 10.75 x 12P C       SRC3R12-YS50    310942
                                        B10-ST
                                        B11-PL
                                                                                                                      SRC3




                }
For Smaller                             3BL 10.38 x 13P C       REB3R13-YS50     310543
Motors                                  3BL 10.25 x 14P C       REB3R14-YS50     310544
And/Or                                  3BL 10.25 x 15P C       REB3R15-YS50     310545
Lighter Loads                           3BL 10.25 x 16P C       REB3R16-YS50     310546
                                        B8-ST
                                        B9-PL                                                                         REB3

                                        FOUR BLADE ACCELERATOR SERIES
                                 FOUR   4BL 10.375 x 13P C   SCB4R13-YS50        311943
                                BLADE   4BL 10.375 x 15P C   SCB4R15-YS50        311945
                                        B17-ST
                                        B19-PL
                                                                                                                      SCB4
“D CLASS” INTERMEDIATE 3/4 CYL 50-130HP 4.25” GEARCASE
60-130 HP           All Years  YM90     THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
T60 4 Stroke High Thrust                3BL 14.00 x 11P C     WBH3R11-YM90      322241     WBH3L11-YM90
50 HP 4 Stroke “Big Foot”1996 Forward   3BL 14.00 x 13P C     WBH3R13-YM90      322243     WBH3L13-YM90
                                        B17-ST
                                        B19-PL
                                                                                                                      WBH3
                                        VALUE LINE ALL-PURPOSE PROPS - EQUIVALENT TO RAPTURE, BALLISTIC, STILETTO
                                        3BL 13.25 x 15P C      RED3R15-YM90     320745    RED3L15-YM90       320445
                                        3BL 13.25 x 17P C      RED3R17-YM90     320747    RED3L17-YM90       320447
NOTE: Special small diameter            3BL 13.25 x 19P C      RED3R19-YM90     320749    RED3L19-YM90       320449
props available for low cubic inch      3BL 13.25 x 21P C      RED3R21-YM90     320751    RED3L21-YM90       320451
“Bigfoots” and 4 stroke motors          Y11-ST
Call Tech Support                       Y12-PL                                                                        RED3

                                        OEM EQUIVALENT STERNLIFTER - PERFORMS LIKE FACTORY BLACK SEMI-CLEAVER
                                        3BL 13.75 x 15P C     MQF3R15-YM90     322645    MQF3L15-YM90
                                        B14-ST
                                        B15-PL

                                                                                                                      MQF3




   52
                                              YAMAHA* (Continued)
STANDARD FINISH IS POLISH                                         RIGHT HAND                  LEFT HAND
Motor & Model       Year                Blds/Dia/Pitch/Cup         PART NO.        UPC#        PART NO.        UPC#
“D CLASS” INTERMEDIATE 3/4 CYL 50-130HP 4.25” GEARCASE - CONT.
60-130 HP           All Years  YM90     OEM EQUIVALENT STERNLIFTER - PERFORMS LIKE FACTORY BLACK SEMI-CLEAVER
T60 4 Stroke High Thrust                3BL 13.00 x 15P C     SCD3R15-YM90     323345
50 HP 4 Stroke “Big Foot”1996 Forward   3BL 13.00 x 17P C     SCD3R17-YM90     323347    SCD3L17-YM90
                                        3BL 13.00 x 19P C     SCD3R19-YM90     323349    SCD3L19-YM90
                                        3BL 13.00 x 21P C     SCD3R21-YM90     323321    SCD3L21-YM90
                                        B14-ST
                                        B16-PL                                                                        SCD3

                              FOUR      FOUR BLADE SEMI-CLEAVER STERNLIFTING PROPS
                             BLADE      4BL 13.00 x 15P C     SCD4R15-YM90     323345
                                        4BL 13.00 x 17P C     SCD4R17-YM90     323347
                                        4BL 13.00 x 19P C     SCD4R19-YM90     323349
                                        4BL 13.00 x 21P C     SCD4R21-YM90     323321
                                        B19-ST
                                        B21-PL                                                                        SCD4

 WHERE RPM’S ARE                        SMALL BLADE AREA, SMALL DIAMETER PROPS, FOR RPM GAIN - 3 BLADE
 LOW, SBP3 AND                          3BL 12.75 x 13P C     SBP3R13-YM90               SBP3L13-YM90
 XSB4 BLADE STYLES                      3BL 12.75 x 15P C     SBP3R15-YM90               SBP3L15-YM90
 OFFER SMALLER                          3BL 12.75 x 17P C     SBP3R17-YM90               SBP3L17-YM90
 DIAMETER AND                           3BL 12.75 x 19P C     SBP3R19-YM90               SBP3L19-YM90
 BLADE AREA                             B11-ST
                                        B12-PL                                                                        SBP3

                                        SMALL BLADE AREA, SMALL DIAMETER PROPS, FOR RPM GAIN - 4 BLADE
                              FOUR      4BL 12.75 x 13P C     XSB4R13-YM90               XSB4L13-YM90
                             BLADE      4BL 12.75 x 15P C     XSB4R15-YM90               XSB4L15-YM90
                                        4BL 12.75 x 17P C     XSB4R17-YM90               XSB4L17-YM90
                                        4BL 12.75 x 19P C     XSB4R19-YM90               XSB4L19-YM90
                                        B19-ST
                                        B21-PL                                                                        XSB4

                                        LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO PRO SERIES, BALLISTIC XL
                                        3BL 13.50 x 18P C       PTR3R18-YM90      322748
                                        3BL 13.50 x 20P C       PTR3R20-YM90      322750
                                        3BL 13.50 x 22P C       PTR3R22-YM90      322752
                                        3BL 13.50 x 24P C       PTR3R24-YM90      322754
                                        B14-ST
                                        B16-PL                                                                        PTR3

                                        ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”) - 4 BLADE
                              FOUR      4BL 13.25 x 15P C      RXB4R15-YM90    323645    RXB4L15-YM90
                             BLADE      4BL 13.25 x 17P C      RXB4R17-YM90    323647    RXB4L17-YM90
                                        4BL 13.25 x 19P C      RXB4R19-YM90    323649    RXB4L19-YM90
                                        4BL 13.25 x 21P C      RXB4R21-YM90    323651    RXB4L21-YM90
                                        B19-ST
                                        B21-PL                                                                        RXB4




                                                                                                                         53
                                          YAMAHA* (Continued)
STANDARD FINISH IS POLISH                                       RIGHT HAND                     LEFT HAND
Motor & Model       Year            Blds/Dia/Pitch/Cup           PART NO.         UPC#          PART NO.        UPC#
“D CLASS” INTERMEDIATE 3/4 CYL 50-130HP 4.25” GEARCASE - CONT.
                             YM90   FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4) - 4 BLADE
New Bay & Flats              FOUR   4BL 13.00 x 14P C      PFS4R14-YM90     323244
NRS4 available now!         BLADE   4BL 13.00 x 15P C      PFS4R15-YM90     323245
                                    4BL 13.00 x 16P C      PFS4R16-YM90     323246
                                    B19-ST
                                    B21-PL                                                                                  PFS4


“E CLASS” V-6 150-300HP 4.75” GEARCASE (ALSO RUBBER HUB STERNDRIVE MODELS)
150-300 HP       All Years CLY200   THRUSTER SERIES LOAD PUSHING PROPS - WIDE BLADE - PONTOON & WORKBOAT
                                    3BL 15.50 x 11P C    WBB3R11-CLY200     381441   WBB3L11-CLY200
                                    3BL 15.50 x 13P C    WBB3R13-CLY200     381443   WBB3L13-CLY200
                                    B18-ST
                                    B20-PL
                                                                                                                            WBB3




                               {
                                    MULTI-USE SERIES BEST ALL-PURPOSE PROPS - NEAREST EQUIVALENT TO BLACK - OEM STAINLESS
              Best Value For        3BL 14.50 x 15P C         MQS3R15-CLY200     383445     MQS3L15-CLY200      383545
                Standard            3BL 14.50 x 17P C         MQS3R17-CLY200     383447     MQS3L17-CLY200      383547
               Applications         3BL 14.00 x 19P C         MQS3R19-CLY200     383449     MQS3L19-CLY200      383549
                                    3BL 13.75 x 21P C         MQS3R21-CLY200     383451     MQS3L21-CLY200      383551
                                    B14-ST
                                    B15-PL                                                                                  MQS3

                                    LIFTER SERIES BOWLIFTING PROPS - SIMILAR TO RAPTURE, STILETTO, BALLISTIC
                                    3BL 14.25 x 15P C      PTC3R15-CLY200     385645   PTC3L15-CLY200     384945
     F350 PROP                      3BL 14.25 x 17P C      PTC3R17-CLY200     385647   PTC3L17-CLY200     384947
                                    3BL 14.25 x 19P C      PTC3R19-CLY200     385649   PTC3L19-CLY200     384949
 AVAILABLE IN 3- AND
                                    3BL 14.25 x 21P C      PTC3R21-CLY200     385651   PTC3L21-CLY200     384951
      4-BLADE                       3BL 14.25 x 23P C      PTC3R23-CLY200     385653   PTC3L23-CLY200     384953
  CONFIGURATIONS                    B14-ST                                                                                  PTC3
                                    B15-PL

                                    “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 3 BLADE
                                    3BL 14.25 x 17P C      SFS3R17-CLY200
                                    3BL 14.25 x 19P C      SFS3R19-CLY200
                                    3BL 14.25 x 21P C      SFS3R21-CLY200
                                    3BL 14.25 x 23P C      SFS3R23-CLY200
                                    B16-ST
                                    B18-PL                                                                                  SFS3

                                    “BABY OFS” - SMALL DIAMETER PERFORMANCE OFFSHORE - 4 BLADE
                             FOUR   4BL 14.25 x 17P C      SFS4R17-CLY200
                            BLADE   4BL 14.25 x 19P C      SFS4R19-CLY200
                                    4BL 14.25 x 21P C      SFS4R21-CLY200
                                    4BL 14.25 x 23P C      SFS4R23-CLY200
                                    B21-ST
                                    B24-PL                                                                                  SFS4




   54
                                          YAMAHA* (Continued)
STANDARD FINISH IS POLISH                                   RIGHT HAND                  LEFT HAND
Motor & Model       Year            Blds/Dia/Pitch/Cup       PART NO.        UPC#        PART NO.       UPC#
“E CLASS” V-6 150-300HP 4.75” GEARCASE (ALSO RUBBER HUB STERNDRIVE MODELS) - CONT.
150-300 HP       All Years CLY200   FLATS SUPERCUP FOR EXTREME MOTOR ELEVATION (REDUCE PITCH 3-4”) - 4 BLADE
                            FOUR    4BL 14.50 x 15P C     PFL4R15-CLY200  386345
                           BLADE    4BL 14.50 x 16P C     PFL4R16-CLY200  386346
                                    4BL 14.50 x 17P C     PFL4R17-CLY200  386347
                                    B21-ST
                                    B24-PL
                                                                                                                PFL4
                                    SKI MAX FOUR/FLATS MODERATE CUP/OFFSHORE - 4 BLADE
                             FOUR   4BL 14.25 x 15P C     PTC4R15-CLY200  382445     PTC4L15-CLY200    382845
                            BLADE   4BL 14.25 x 17P C     PTC4R17-CLY200  382447     PTC4L17-CLY200    382847
                                    4BL 14.25 x 19P C     PTC4R19-CLY200  382449     PTC4L19-CLY200    382849
                                    4BL 14.25 x 21P C     PTC4R21-CLY200  382451     PTC4L21-CLY200    382851
                                    4BL 14.25 x 23P C     PTC4R23-CLY200  382453     PTC4L23-CLY200    382853
                                    B21-ST                                                                      PTC4
                                    B24-PL

                                    OFFSHORE SERIES PROPS - SIMILAR TO 3 BLADE SALTWATER SERIES
                                    3BL 15.25 x 15P C    OFS3R15-CLY200      385145   OFS3L15-CLY200   385245
                                    3BL 15.25 x 17P C    OFS3R17-CLY200      385147   OFS3L17-CLY200   385247
                                    3BL 15.25 x 19P C    OFS3R19-CLY200      385149   OFS3L19-CLY200   385249
     F350 PROP
                                    3BL 15.25 x 21P C    OFS3R21-CLY200      385151   OFS3L21-CLY200   385251
 AVAILABLE IN 3- AND                3BL 15.25 x 23P C    OFS3R23-CLY200      385153   OFS3L23-CLY200   385253
      4-BLADE                       3BL 15.25 x 25P C    OFS3R25-CLY200      385155   OFS3L25-CLY200   385255   OFS3
  CONFIGURATIONS                    3BL 15.25 x 27P C    OFS3R27-CLY200      385157   OFS3L27-CLY200   385257
                                    B21-ST
                                    B24-PL

                                    OFFSHORE SERIES PROPS - SIMILAR TO 4 BLADE SALTWATER SERIES
                             FOUR   4BL 15.25 x 15P C    OFS4R15-CLY200      385345   OFS4L15-CLY200   385445
                            BLADE   4BL 15.25 x 17P C    OFS4R17-CLY200      385347   OFS4L17-CLY200   385447
                                    4BL 15.25 x 19P C    OFS4R19-CLY200      385349   OFS4L19-CLY200   385449
                                    4BL 15.25 x 21P C    OFS4R21-CLY200      385351   OFS4L21-CLY200   385451
                                    4BL 15.25 x 23P C    OFS4R23-CLY200      385353   OFS4L23-CLY200   385453
                                    4BL 15.25 x 25P C    OFS4R25-CLY200      385355   OFS4L25-CLY200   385455   OFS4
                                    4BL 15.25 x 27P C    OFS4R27-CLY200      385357   OFS4L27-CLY200   385457
                                    B27-ST
                                    B31-PL

                                    HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 3 BLADE
                                    3BL 15.25 x 15P C   OFX3R15-CLY200               OFX3L15-CLY200
                                    3BL 15.25 x 17P C   OFX3R17-CLY200               OFX3L17-CLY200
                                    3BL 15.25 x 19P C   OFX3R19-CLY200               OFX3L19-CLY200
                                    3BL 15.25 x 21P C   OFX3R21-CLY200               OFX3L21-CLY200
                                    3BL 15.25 x 23P C   OFX3R23-CLY200               OFX3L23-CLY200
                                    3BL 15.25 x 25P C   OFX3R25-CLY200               OFX3L25-CLY200             OFX3
                                    3BL 15.25 x 27P C   OFX3R27-CLY200               OFX3L27-CLY200
                                    B21-ST
                                    B24-PL




                                                                                                                   55
                                          YAMAHA* (Continued)
STANDARD FINISH IS POLISH                                    RIGHT HAND                 LEFT HAND
Motor & Model       Year            Blds/Dia/Pitch/Cup        PART NO.       UPC#        PART NO.       UPC#
“E CLASS” V-6 150-300HP 4.75” GEARCASE (ALSO RUBBER HUB STERNDRIVE MODELS) - CONT.
150-300 HP       All Years CLY200   HIGH PERFORMANCE OFFSHORE LIFTER SERIES - 4 BLADE
                            FOUR    4BL 15.25 x 15P C   OFX4R15-CLY200    557645     OFX4L15-CLY200    557745
                           BLADE    4BL 15.25 x 17P C   OFX4R17-CLY200    557647     OFX4L17-CLY200    557747
                                    4BL 15.25 x 19P C   OFX4R19-CLY200    557649     OFX4L19-CLY200    557749
                                    4BL 15.25 x 21P C   OFX4R21-CLY200    557651     OFX4L21-CLY200    557751
                                    4BL 15.25 x 23P C   OFX4R23-CLY200    557653     OFX4L23-CLY200    557753
                                    4BL 15.25 x 25P C   OFX4R25-CLY200    557655     OFX4L25-CLY200    557755      OFX4
                                    4BL 15.25 x 27P C   OFX4R27-CLY200    557657     OFX4L27-CLY200    557757
                                    B27-ST
                                    B31-PL

                                    OEM EQUIVALENT SEMI-CLEAVER STERNLIFTING PROPS - 3 BLADE
                                    3BL 14.00 x 15P C     SCE3R15-CLY200              SCE3L15-CLY200
                                    3BL 14.00 x 17P C     SCE3R17-CLY200              SCE3L17-CLY200
                                    3BL 14.00 x 19P C     SCE3R19-CLY200              SCE3L19-CLY200
                                    B17-ST
                                    B19-PL                                                                         SCE3

                                    FOUR BLADE SEMI-CLEAVER STERNLIFTING PROPS - 4 BLADE
                             FOUR   4BL 14.00 x 15P C       SCE4R15-CLY200            SCE4L15-CLY200
                            BLADE   4BL 14.00 x 17P C       SCE4R17-CLY200            SCE4R17-CLY200
                                    4BL 14.00 x 19P C       SCE4R19-CLY200            SCE4R19-CLY200
                                    B36-ST
                                    B37-PL                                                                         SCE4
                                    ACCELERATOR SERIES HOLESHOT/HANDLING PROPS (REDUCE PITCH 1-2”)
                                    SIMILAR TO TROPHY - 4 BLADE - SMALL HUB
                             FOUR   4BL 13.75 x 17P C       TRO4R17-CLY150  456153
                            BLADE   4BL 13.75 x 19P C       TRO4R19-CLY150  456155
                                    4BL 13.75 x 21P C       TRO4R21-CLY150  456157
                                    4BL 13.75 x 23P C       TRO4R23-CLY150  456153
                                    4BL 13.75 x 25P C       TRO4R25-CLY150  456155
                                    4BL 13.75 x 27P C       TRO4R27-CLY150  456157                                 TRO4
                                    B21-ST
                                    B24-PL
                                    HIGH PERFORMANCE BASS/BAY SERIES BOWLIFTING PROPS - SIMILAR TO YAMAHA VX-MAX
                                    3BL 15.25 x 23P C       VMX3R23-CLY200
                                    3BL 15.25 x 25P C       VMX3R25-CLY200
                                    3BL 15.25 x 27P C       VMX3R27-CLY200
                                    B21-ST
                                    B24-PL                                                                         VMX3




   56

								
To top