Engine Service Equipment _ Tools by dfsiopmhy6

VIEWS: 947 PAGES: 55

									                     Engine Service Equipment & Tools




Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                  Fax:
Suite 6, St Georges House, Brighton,              +44 (0)1273 686870          +44 (0)2075 043787
East Sussex,BN2 1ED,                              +44 (0) 7745790024          +44 (0)1273 675740
United Kingdom.                                   E-Mail: sales@hemsltd.com   www.hemsltd.com
                      Engine Service Equipment & Tools                                                                                                                      A1
       DIAGNOSTIC EQUIPMENT & TOOLS
                                  ___________________________________________________________




                                                                                                                                                                                 ENGINE SERVICE
    BLOW-BY CHECKER
                                                                    Measuring the blow-by pressure in engines.

                                                                                    Code No.                                            AA-1551
                                                                      Measuring range                             0~5KPa 0 - 500 mm H2O
                                                                      Gradua ion                                  0.05KPa 10 mm H2O
                                                                      Accuracy                                    ±2%
                                                                      Hose




                                                                                                                                                                                 A
                                                                      Mass                                        4.5 kg




                                                   ________________________________________________
    BATTERY AND COOLANT TESTER
                                                                    This tester is designed specifically for rapid and accurate check-
                                                                    ing of anti-freeze protection and battery charge. Only a few drops
                                                                    of coolant or battery acid are required to take an accurate read-
                                                                    ing. This tester automatically corrects for temperature so there is
                                                                    no waiting until the engine is warmed up because it works when
                                                                    the coolant is hot or cold.
                                                                    The scales are easily read and the heavy duty die cast body is
                                                                    covered with a protective vinyl housing thus providing for rugged
                                                                    use. You can even drop it without fear of damage since there are
                                                                    no floats or glass tubes to break.

                                                                                  Code No.                                             AA-5301
                                                                     Reading                 Specific                           Range: 1.10 ~ 1.30
                                                                     Range                   gravity                            Graduation:0.01
                                                                                             Freezing                           Range: 0 ~ –50˚C
                                                                                             temp.                              Graduation:5˚C
                                                                                             Coolant                            Range: 0 ~ 60%
                                                                                             dencity                            Graduation: 5%
                                                                     Overall length                                             145mm
                                                                     Mass                                                       85g


                                            Scale view



                                                                       ______________________________________
    RADIATOR CAP & COOLING SYSTEM TESTER
                                                                    The radiator cap and cooling system tester facilitates easy judge-
                                                                    ment about proper conditions of a radiator and its cap.
                                                                    This kind of tester is widely used throughout the world and is in-
                                                                    cluded in the standard facility list for the automobile and construc-
                                                                    tion equipment maintenance shop.

                                                                              Code No.                           AA-5101                          AA-5104
                                                                      Pressure range                0~0.2MPa                                    0~0.6MPa
                             AA-5101
                                                                                                  0 ~ 2 kgf/cm2                                0 ~ 6 kgf/cm2
                                                                      Graduations            0.01MPa 0.1 kgf/cm2
                                                                      Application                 Passenger car                          Construction equipment
                                                                      Hose length                     20 cm                                     100 cm
                                                                      Carton case dimensions    260 x 150 x 95 mm
                                                                      Mass                           1,360 g                                        6.5 kg
                                                                      Power source                    Manual                                       DC 12V
                                                                    Option: (1) Code No. AA-5102, Adaptor for large vehicle.
                                                                            (2) Adaptors for Fiat, BMW, Romeo and Santana are available.




            AA-5102                        AA-5104



                                                            Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd      Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,                 +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                                 +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                      E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A2
                          Engine Service Equipment & Tools
                             ________________________________________________________________
        VACUUM PUMP
                                                                     Vacuum Pump is used in checking, measuring and adjusting vari-
                                                                     ous vacuum operated components. This creates and holds a
                                                                     metered vacuum for pumping, testing and servicing a wide vari-
                                                                     ety of automotive, marine, aircraft and agricultural equipment.
                                                                     Crafted of durable high impact PVC, a self-lubricating, mainte-
                                                                     nance-free, sealed, noncorrosive unit.
                                                                     Some of the already proven uses include checking: air intake con-
                                                                     trol valve, distributor vacuum advance, EGR valve, power brakes,
                                                                     transmission modulator and motorcycle carburetors.

                                                                              Code No.                                           AA-1503
                                                                              Model No.                                           7559
                                                                       Pumping rate                                     16.4 cm3/stroke
                                                                       Attain vacuum                           635 mm of mercury in a few seconds
                                                                       Nozzle size                                         6 mm I.D.
                                                                       Mass                                                  1.7 kg




                                                                           _____________________________________
        DIESEL SMOKE METER, BOSCH (FILTER) TYPE
                                                                     The exhaust smoke of diesel engine is not only uncomfortable
                                                                     but disturbs the field of view and is a safety obstacle of transpor-
                                                                     tation. Also the smoke creates benzyl and is the origin of environ-
                                                                     mental pollution. This meter measures the contamination of the
                                                                     exhaust smoke of diesel engine vehicles.
                                                                     You can find the trouble of diesel engine by measuring the con-
                                                                     tamination of the smoke. Trouble are, for example, the wear of
                                                                     injection nozzle, improper adjustment of valve timing, improper
                                                                     timing of fuel injection, the wear of piston ring, the clogging of air
                                                                     filter, improper setting of fuel injection, etc.
                                                                     Remarks;
                                                                     AK-0903MP : With data processor and printer type.



                                  AK-0903


                                    Code No.               AK-0903/AK-0903MP                                                    Accessories
                             Display                      LED Indication 0 ~ 100.0%                       Probe                                                1
                             Accuracy                       ±3% of the full scale                         Smoke lead hose (5m)                                 1
                             Absorbtion time                    1.4 ±0.2 sec.                             Foot switch with 10m cable                           1
                             Absorbtion capacity                330 ±15 sec.                              Filter paper                                         100pcs
                             Warm up time                         5 minute                                Standard calibration paper                           2
                             Electric supply                    AC 1 ph 230V                              Spare lamp (12V 500mA)                               1
                             Dimension (LxWxH)              370 x 290 x 390 mm                            Spare fuse (3A)                                      1
                             Mass                                   19 kg


                                               _______________________________________________________
        HANDY SMOKE CHECKER
                                                                     Features
                                                                     The exhaust gas is drawn through the filter paper by the handy
                                                                     pump, leaving a stain on the filter paper.
                                                                     The color of the stain is then compared with the standard color
                                                                     samples, indicating the smoke density.

                                                                                 Code No.                                         AK-0904
                                                                       Range of measurement               0 to 70% (Degree of contamination)
                                                                       Dimensions                         410 x 300 x 65 mm
                                                                       Mass                               3 kg




                                                             Illustrations and technical data are non-binding and subject to change as a result of technological progress.


     Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
     Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
     East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
     United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                           A3
                                                                 __________________________________________
    DIESEL SMOKE METER (OPTICAL TYPE)
                                                                        For more than 30 years, the Hartridge Smokemeter has set the




                                                                                                                                                                                     ENGINE SERVICE
                                                                        international standard for diesel exhaust smoke measurement,
                                                                        whether for law enforcement at the roadside, type approval work
                                                                        in engine test cells or in the service workshop. Now with the
                                                                        introduction of the new Smokemeter 4, significant operational fea-
                                                                        tures have been added. These include one man in-cab opera-
                                                                        tion, reduced size and weight, and an optional results printer.
                                                                        Correlation with the previous Hartridge Smokemeter is maintained




                                                                                                                                                                                     A
                                                                        by using the previous Hartridge Smokemeter is maintained by
                                                                        using the same principle of smoke measurement. New design
                                                                        features however, improve and simplify operation and ensure that
                                                                        the Smokemeter 4 meets all existing and anticipated international
                                                                        exhaust smoke regulation standards.

                                                                        Main Features
                                                                        O Designed to meet existing and anticipated international legisla-
                                                                          tion.
                                                                        O Correlates accurately with the Hartridge Smokemeter.
                                                                        O Free acceleration or steady state testing.
                                                                        O Easy one man operation using remote control handset.
                                                                        O Light and compact - truly portable.
                                                                        O Operates from 10 to 16V D.C., or the optional A.C. power unit.
                             AK-0911-01,-02                             O Digital output in ‘K’ or H.S.U’s - with peak hold.
                                                                        O Printer/Data entry organiser available.
                                                                        O Engine speed sensor facility.

                                          Ordering Guide;
                                                                                                                                             Complete Set No.
                                               Code No.                               Description
                                                                                                                                           AK-0911     AK-0912
                                              AK-0911-01   Basic Smoke Meter
                                              AK-0911-02   Trolley (Cabinet)
                                              AK-0911-03   Printer, Console Ass y
                                              AK-0912-03   Printer / Data Entry, Console Ass y
                                              AK-0911-04   A.C. Power Unit                                                                   option             option
                                              AK-0911-05   24V D.C. to 12V D.C. Converter Kit                                                option             option
                                              AK-0911-06   Speed Sensor Kit                                                                  option             option
                                              AK-0911-07   Heavy Duty Probe Kit                                                              option             option
                                          Marks “O” contained in set.




                                     _________________________________________________________
    DIESEL TACHO TESTER
                                                                        The diesel tacho tester is especially designed for measuring en-
                                                                        gine rotation speed by fixing a small sensor on the injection pipe.


                                                                                  Code No.                           AB-1502                          AB-1509
                                                                          Diaplay                                    Analog                            Digital
                                                                          Measuring range min-1 (rpm)        0 ~ 1,500, 0 ~ 6,000                  300 ~ 6,000
                                                                          Power source                       Battery, UM3 (1.5V)                      Battery
                                                                                                                       x6                         UM3 (1.5V) x 6
                                                                          Pick up                                Clip type (ø6)                    Clip type (ø6)
                                                                          Dimensions                mm          159 x 92 x 273                    159 x 92 x 273
                                                                          (L x W x H)
                                                                          Mass                        kg                1.3                               1.3
                                                                        Options : Pick-up 4.5, 5, 6.4, 8mm
              AB-1502




                                                AB-1509



                                                                Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd       Telephone:                                                                        Fax:
Suite 6, St Georges House, Brighton,                  +44 (0)1273 686870                                                                +44 (0)2075 043787
East Sussex,BN2 1ED,                                  +44 (0) 7745790024                                                                +44 (0)1273 675740
United Kingdom.                                       E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
A4
                                Engine Service Equipment & Tools
                                                                          _____________________________________________
        DIESEL TIMING AND TACHO TESTER
                                                                                       Large LED digital display for RPM and timing angle in separate
                                                                                       window segment.
                                                                                       Easily hooked up to test engine for carrying out both “static” and
                                                                                       “dynamic” injection timing tests.
                                                                                       Incorporates built-in safety features to prevent damage through
                                                                                       wrong external wiring connections.

                                                                                                           Code No.                                         AB-1507
                                                                                                                            -1
                                                                                         Measuring range               mim (rpm)              Engine revolution 120 ~ 9,990
                                                                                                                                                   (10 rpm increment)
                                                                                         Timing                                  deg            0 ~ 90 (Advance/retard)
                                                                                                                                                     (0.5˚ increment)
                                                                                         Power source                                                   DC 12/24V
                                                                                         Pick up                                                   Clamping type (ø6)
                                                                                         Test of injection timing                                      Timing light
                                                                                         Dimensions                              mm                  300 x 191 x 212
                                                                                         (L x W x H)
                                                                                         Mass                                     kg                        Approx. 4
                                                                                       Option : Pick-up 4.5, 5, 6.4, 8mm


                                                                        ______________________________________________
        DIESEL COMPRESSION GAUGE SET
                                                                                       The engine compression gauge is used for reading compression
                                                                                       pressure of engine cylinders. The gauge makes it possible to
                                                                                       judge whether the pistons, piston rings, gaskets and valves are in
                                                                                       normal condition or not.




                   AB-1203                                     AB-1204                                                                 AB-1206




                Code No.                     AB-1203                          AB-1204                                   AB-1206                                  AB-1207
         Gauge   MPa(kgf/cm2)                7.0(70)                          7.0(70)                                  7.0(70)                                  7.0(70)
         Case dimensions mm               335 x 220 x 50                   365 x 270 x 50                          410 x 300 x 127                           335 x 200 x 50
         Mass             kg                   3.8                              6.2                                     14.5                                      3.4
                                         Hose           1                  Hose          1                          Hose                1                  Hose          1
                                         Packing      10                   Packing      10                          Packing             3                  Packing      10
                                         Adapter        6                  Adapter       7                          Adapter            16                  Adapter       4
                                         L type joint 1                    L type joint 1                                                                  L type joint 1
                                 for Middle size engine            for Large size engine                  for Construction equipment               for Agriculture equipment
         Standard accessories    ELF        C221, C240, TLD24      HINO        EF100, KF, ED              KOMATSU 92-1, 94-1                       YAMMER
                                 ISUZU      6BB-1, 6BA-1, 6BD-1,               EG100, EH100                           3D78, 105-1, 2, 3            ISEKI
                                            4BA-1                  ISUZU       8PA-1, 10PA-1                          3D72, 75, 120-11             KUBOTA A
                                 FUSO       6DS, 6DB, 6DC,                     10PB-1, 12PA-1                         125, 84-1, 130-1             MITSUBISHI K
                                            4D-31, 8DB             FUSO        8DC-8, 6D                              170, 95-1, 155-4
                                 TOYOTA J, 2J, HBQ, 920B           NISSAN PD8t, PE-10t,                               140-1
                                                                               ND6, RD                    CUMMINS 743, 855, 1150
        There are a lot of adapters available, please see next page or contact us for detail.
        Diesel compression gauge sets consist of a gauge and several adapters.




                                                                               Illustrations and technical data are non-binding and subject to change as a result of technological progress.


     Heavy Equipment Maintenance Solutions(Hems) Ltd                   Telephone:                                                                        Fax:
     Suite 6, St Georges House, Brighton,                              +44 (0)1273 686870                                                                +44 (0)2075 043787
     East Sussex,BN2 1ED,                                              +44 (0) 7745790024                                                                +44 (0)1273 675740
     United Kingdom.                                                   E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
                                  Engine Service Equipment & Tools                                                                                                                                   A5
                                                                                                          ___________________________________
    ADAPTERS FOR DIESEL COMPRESSION GAUGE




                                                                                                                                                                                                          ENGINE SERVICE
          1                2             3               4       5               6




                                                                                                                                                                                                          A
    For Passenger Car, Truck & Bus                                                                 For Passenger Car, Truck & Bus
    (Code No. AB-1210)                                                                             (Code No. AB-1210)
     No.                       Applicable engine model           Adapter installing place           No.                   Applicable engine model                      Adapter installing place
              Toyota             2D                                                                 24                       C220, C221
      1       Hino               DA59                                                               39
      2                          *KE31, KE35, KE36, KE41, KE63                                      48    Isuzu              DA120 220 DA640
      3                          T-620, 6DB-1                                                       62                       JEMINI
      4                          6DS, 6DB, 6DC, 8DB, 8DC                                            63                       4BC-2
      5                          4DQ, 4DR                                                           25                                                                  Heat Plug
      6                          6DC, 8DC                                                           26                       2J, B
     32       Mitsubishi         8DC-4, 8DC-6                                                       38                       L, 2D
     35                          8DC-8                                                                    Toyota
                                                                                                    53                       IC
     37                          6D                                                                 65                       Dyna
     41                          4D55                                                               66                       INT
     56                          6DE                                                                34                       PD
     57                          4D-31                                                              68                       SD20, 23, 33
      7                          DM100                                                              69                       LD20, 28, 20T
      8                          EC100, EH, DQ100                                                   70                       CD17
      9                          EA100                                                                    Nissan
                                                                                                    71                       TD27
     28                          ED                                                                 75                       ED6
     29       Hino               EF100, KF, EG100, EH100                                            76                       CD
     36                          EK100                                                              78                       CD
     42                          EH-700                                                             64    Daihatsu           CL10, 50
     43                          EB100, EB300, DK10, 20          Injector                           79    Mazuda             S2, R2, RF
     52                          50, 60, 70, 80, 120
     58                          EL-100
                                 DA640, DA120, 220,
     11                          DH100, DH100H, DH100EA,                                           For Construction Equipment
                                 2D, E110, E110H
     12                          D400, D500, 6AB-1, C330                                           (Code No. AB-1210)
     13                          C221, C240, TLD-24                                                    No.                                Applicable engine model
     10                          E120
                                                                                                       K1      CUMMINS                                  855
     30       Isuzu              6BB-1, 4BA-1, 6BA-1,6BD-1
                                                                                                       K2      KOMATSU                                  94-1
     31                          6B-1, D920
                                                                                                       K3      CUMMINS                                  743
     44                          8PA-1, 10PA-1, 10PB-1, 12PA-1
                                                                                                       K4                                               105-1 2 3
     55
                                                                                                       K5                                               120-11 130-1
     51                          4F-B1                                                                         KOMATSU
                                                                                                       K6                                               92-1
     80                          4BE1
                                                                                                       K7                                               155-4
     14                          JK171
                                                                                                       K8      ENGLISH NTERNATIONAL
     15                          J, 2J, HBQ
                                                                                                       K9      KOMATSU                                  2D92, 4D92
     59       Toyota             Dyna
                                                                                                      K10      GERMAN NTERNATIONAL
     60                          Dyna
                                                                                                      K11      PARKINS
     73                          IC
                                                                                                      K12      KOMATSU                                  110
     18                          *SD22, SD33, C220, C170, C190
                                                                                                      K13      CUMMINS                                  1150
     16                          UD
                                                                                                      K14                                               170
     17                          PD8t, PE10t, ND6, RD
                                                                                                      K15                                               125
     33       Nissan             ED-6, ED-30
                                                                                                      K16                                               95-1 (Direct injection)
     45                          LD, SD20
                                                                                                      K17      KOMATSU                                  95-1 (Squish chambein)
     54                          FD-6, FDT
                                                                                                      K18                                               140-1
     61                          Audi santana
                                                                                                      K19                                               3D78
     74                          TD-D
                                                                                                      K20                                               3D72, 75, 84-1
     19       Daihatsu           DE, DV22, DV24, DO
                                                                                                      GM-1                                              MM-6-21G
     77                          CL10, 50
                                                                                                      GM-2                                              KE140, K44, KE150, K-13A, K-13B
     20       Mazuda             XA                                                                            CATERPILLAR MITSUBISHI
                                                                                                      GM-3                                              CAT A
     50
                                                                                                      GM-4                                              CAT B
     49       VW, Benz, Golf
                                                                                                      KU-1                                              ER, 80, 100
     72       Volvo
                                                                                                      KU-2     KUBOTA                                   E50, E55, E60, E70
     27                                                          L type joint
                                                                                                      KU-3                                              D1900
     21                          4DQ, 6DB-1
                                                                                                      KU-4     FIAT                                     D3000, V4000
     22                          6DB, 6DS, 6DC
                                                                                                      KU-5     MITSUI DEUTZ
     23                          8DB, 8DC
                                                                                                      KU-6                                              E750, E900, E1000
     40       Mitsubishi         4DR, 50A                        Heat Plug
                                                                                                      KU-7                                              E1100 E1250
     46                          DG 6DS-70C
                                                                                                      KU-9                                              Z430, D600
     47                          6D-11
                                                                                                       S-1                                              SD460, 3T, SD4003
     67                          4D30
                                                                                                       S-2                                              SD30000, AT, SD3203
    *:need No.27 L type joint                                                                          S-3                                              SF1000T, SE8300, SE7300
                                                                                                      YH-1                                              SS
                                                                                                      YH-2     YANMAR
                                                                                                      YH-3
                                                                                                   *Order Guide : (Code No. ) - (No. )
                                                                                                   Example : AB-1210-K1 Adapter, Cummins 855




                                                                                     Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd                             Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                                        +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                                        +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                                             E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A6
                              Engine Service Equipment & Tools
                                                           ___________________________________________________
        GASOLINE ENGINE ANALYZER
        It makes engine tuning possible while reviewing engine revolutions, dwell angles, resistance, vacuum, etc. displayed on various
        meters.
        Engine analyzers are playing important rolles in tuning over complicating engines and fuel injection systems developed for
        emission control. AC-0109 is a programmed analyzer.




                                            AC-0107                                                                AC-0109



                                 Code No.                                      AC-0107                                                      AC-0109

         Applicable engine
           Type                                                     4 cycle, with DC 12V battery                                4 cycle, with DC 12V battery
           No. of cylinder                                                  2, 3, 4, 5, 6, 8                                         2, 3, 4, 5, 6, 8, 12
           Ignition method                                                  Breaker point                                                     ––
                                                                    Transistorized breaker point
                                                                     Transistorized breakerless
         Test item and range
            DC voltage (Battery)                                                0 ~ 20V                                            0 ~ 1,999V/0 ~ 199.9V
            DC ampere                                                              ––                                            0 ~ 199.9mA (Shunt type)
                                                                                                                                   0 ~ 500A (Clamp type)
            Resistance                                                            ––                                              0 ~ 199.9Ω/0 ~ 199.9kΩ
                                                                        2 cylinder (0 ~ 180˚)
            Cam angle                                                                                                 2 cylinder (0 ~ 180˚) ~ 12 cylinder (0 ~ 30˚)
                                                                         8 cylinder (0 ~ 45˚)
            Timing advance                                                        ––                                                    0 ~ 90˚
            Engine revolution                                      0 ~ 1,600 /0 ~ 8,000min -1(rpm)                           0~2,000 /0~12,000min -1 (rpm)
            Breaker point resistance                                      Good/Bad indicate                                               ––
            Ignition timing                                                  Timing light                                                 ––
            Vacuum manifold pressure                                       –0.1~0~0.1MPa                                           –0.1~0~0.1MPa
                                                                    ( 760 mmHg ~ 0 ~ 1 kgf/cm2 )                           (760 mmHg ~ 0 ~ 1 kgf/cm2 & psi.)
            Fuel pressure (for electronically controlled              0~0.5MPa(0 ~ 5 kgf/cm2 )                               0~0.6MPa(0 ~ 6 kgf/cm2 & psi.)
                           fuel injection)
            Engine scope                                                            ––                                   9" rectangular CRT
                                                                                                                         Primary “series” wave pattern
                                                                                                                         Secondary “series” wave pattern
                                                                                                                         Secondary superimposed wave pattern
                                                                                                                         Secondary parallel wave pattern
                                                                                                                         Alternator output wave pattern
                                                                                                                         Injection wave pattern
                                                                                                                         Signal wave pattern
         Power source                                                         DC 12V                                                     DC12V
         Stand dimensions (L x W x H)                                 535 x 455 x 1,020 mm                                       1,000 x 600 x 1,850 mm
         Analyzer dimensions (L x W x H)                               484 x 266 x 289 mm
         Mass                                                       Approx. 9 kg (without stand)                                         Approx. 34 kg
         Remarks                                                      Stand or pendant type


                                                                     Illustrations and technical data are non-binding and subject to change as a result of technological progress.


     Heavy Equipment Maintenance Solutions(Hems) Ltd           Telephone:                                                                      Fax:
     Suite 6, St Georges House, Brighton,                      +44 (0)1273 686870                                                              +44 (0)2075 043787
     East Sussex,BN2 1ED,                                      +44 (0) 7745790024                                                              +44 (0)1273 675740
     United Kingdom.                                           E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                         Engine Service Equipment & Tools                                                                                                                    A7
                                                     ______________________________________________
    COMPUTERIZED ENGINE ANALYZER
    These are computerized engine diagnostic analyzer.




                                                                                                                                                                                  ENGINE SERVICE
      Test items                                         Code No.               Measuring range
     Battery terminal voltage                        AC-0154-01                 0 ~ 34V
     Voltage (potencial free)                        AC-0154-01                 +40.00 ~ –9.99, –10.0 ~ –40.0V
     Engine speed, gasoline engine                   AC-0154-01                 120 ~ 12,000min -1 (rpm)
     Engine speed, diesel engine                     AC-0154-04                 120 ~ 6,000min -1 (rpm)
     Starter motor, Battery charging &
                                                     AC-0154-01                 –600 ~ +600A
     discharging current




                                                                                                                                                                                  A
     Dwell angle                                     AC-0154-01                 0.0 ~ 100%, 0.0 ~ 360˚
     Dwell time                                      AC-0154-01                 1.0 ~ 99.9ms, 100 ~ 999ms
     Ignition timing (by TDC pick-up)                AC-0154-01                 –99.9 ~ 180˚
     Ignition timing (by iming light)                AC-0154-01                 0.0 ~ 60˚
     Injection timing (by TDC pick-up)               AC-0154-04                 –90 ~ 180˚
     Injection timing (by timing light)              AC-0154-04                 0 ~ 60˚
     Electrical resistance                           AC-0154-01                 0.0 ~ 9.99, 10.0 ~ 99.9, 100 ~ 999, 1.00 ~ 9.99k, 10.0 ~ 99.9k,
                                                                                100 ~ 999k, 1.00 ~ 1.99M Ω
     Temperature                                     AC-0154-01                 –20.0 ~ +150.0˚C
     Vacuum                                          AC-0154-03                 0 ~ –130, 0 ~ –800mbar
     Pressure                                        AC-0154-03                 0 ~ 0.6bar
     CO concentration                                AC-0154-02                 0.000 ~ 0.999, 1 00 ~ 10.00%
     HC concentration                                AC-0154-02                 2 ~ 2,000, 2,000 ~ 9,900ppm
     CO2 concentration                               AC-0154-02                 0.0 ~ 18.0%
     Diesel smoke dencity (K-value)                  AC-0154-06                 0.0 ~ 13.86m
     Diesel smoke dencity                            AC-0154-06                 0 ~ 100%, 10 ~ 1,966mg/m3




                                                                     Ordering Guide;
                                                                                                                                               Complete set No.
                                                                          Code No.            Description
                                                                                                                                            AC-0154         AC-0155

                                                                        AC-0154-01            Computerized engine analyzer
                                                                        AC-0154-02            CO/HC/CO2 analyzer
                                                                        AC-0154-03            Pressure vacuum tester
                                                                        AC-0154-04            Diesel engine tester                            option
                                                                        AC-0154-05            Test report printer                             option          option
                                                                        AC-0154-06            Diesel smoke meter
                                                                        AC-0154-07            System trolley, SYS01
                                                                        AC-0154-08            System trolley, SYS045

                                                                     Marks “O” contained in set
                                                                     Various test items are available upon request




                         AC-0154 with AC-0154-04




                                                             Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                        Fax:
Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                                +44 (0)2075 043787
East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                                +44 (0)1273 675740
United Kingdom.                                    E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
A8
                          Engine Service Equipment & Tools
                                                              __________________________________________
        CO-HC EXHAUST EMISSION ANALYZERS
                                                                     - Warm up in 5 minutes with count-down timer.
                                                                     - With “M” -key, ZERO and sensitivity calibration start automati-
                                                                       cally.
                                                                     - Simple icons appear on screen to provide informations and er-
                                                                       rors or abnormal readings.
                                                                     - Easy to operate thru step-by-step Instructions on screen.

                                                                                    Code No.                            AK-1010                       AK-1009

                                                                                                                  CO, HC                        CO, HC, CO2,
                                                                       Measuring component                                                      AFR, LAMDA,
                                                                                                                                                O2 (Optional)
                                AK-1008                                                                           CO:                           CO:
                                                                                                                   0 00~10.00% vol.              0.00~10.00% vol.
                                                                                                                  HC:                           HC:
                                                                                                                   0~10,000ppm vol.              0~10,000ppm vol.
                                                                       Measuring range                                                          AFR:
                                                                                                                                                 10.0~30.0
                                                                                                                                                LAMDA:
                                                                                                                                                 0.50~2.50
                                                                                                                                                O2:
                                                                                                                                                  0.00~25.00%
                                                                       Warm-up time                     min.                                5
                                                                       Power                                         1Ph. 100~240V, 60VA, AC 50/60Hz
                                                                       Dimensions (L x W x H) mm                                  271 x 366 x 143
                                                                       Mass                                kg                         Approx. 4
                                                                                                                  - Analog output               - Analog output
                                                                                                                    DC 0~1V                      DC 0~1V
                                                                       Option
                                                                                                                                                - Printer kit
                                  AK-1009                                                                                                       - O2 sensor




                                                           ____________________________________________
        TIMING LIGHT FOR GASOLINE ENGINE
                                                                     To test the ignition timing for all types of gasoline engines.

                                                                                         Code No.                                         AC-0507

                                                                                         Mass                                             0.52 kg
                                                                                        Remarks                                          SUM-1 dry
                                                                                                                                         battery x 2




                                                             Illustrations and technical data are non-binding and subject to change as a result of technological progress.


     Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
     Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
     East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
     United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                     A9
                                                      _____________________________________________
    VOLT-AMPERE REGULATOR TESTER
                                                                  This tester is designed for testing the ignition primary circuit, starter




                                                                                                                                                                               ENGINE SERVICE
                                                                  circuit, battery charging circuit including generator or alternator,
                                                                  and regulator.
                                                                             Code No.                                           AC-0854

                                                                        Applicable engine               6, 12 and 24V battery ignition system engines
                                                                        Measuring range
                                                                          DC voltage                                0 ~ ±25, 50, 100, 250, 500V
                                                                          DC current                                0 ~ ±25, 50, 100, 250, 500A




                                                                                                                                                                               A
                                                                        Dimensions                                      154 x 92 x 273 mm
                                                                          (L x W x H)
                                                                        Weight                                                 1.7 kg
                                                                        Power source                                       DC6V: SUM 3 x 4




                                                  _________________________________________________
    COIL CONDENSER OHM TESTER
                                                                  This tester is designed to quickly and accurately test the perfor-
                                                                  mance of ignition system, coil and condenser without removing
                                                                  them from the vehicle. It can also measure various resistances
                                                                  from 1 to 100k .
                                                                             Code No.                                            AC-1003

                                                                     Applicable engine                   6, 12 and 24V battery ignition system engines
                                                                     Measuring range
                                                                       Coil                                          Good/Bad Zone indication
                                                                       Condenser                                            0 ~ 0.5 µF
                                                                       Resistance                                      0 ~ 1,000Ω, 100kΩ
                                                                     Power source                                       DC 6V, SUM 3 x 4
                                                                     Dimensions (L x W x H)                             159 x 92 x 273mm
                                                                     Mass                                                     1.3 Kg




                                     _________________________________________________________
    DWELL TACHO TESTER
                                                                  To test the dwell and engine speed, point resistance of the con-
                                                                  tact breaker and voltage of primary circuit.

                                                                                      Code No.                                         AC-1204

                                                                      Engine (12V battery ignition type)                4 cycle, (2, 3, 4, 5, 6, 8 cylinders)
                                                                                                                        2 cycle, rotary
                                                                      Cam angle measuring range                         0˚ ~ 180˚ 2 cyl.
                                                                                                                        0˚ ~ 120˚ 3 cyl.
                                                                                                                        0˚ ~ 90˚ 4 cyl.
                                                                                                                        0˚ ~ 72˚ 5 cyl.
                                                                                                                        0˚ ~ 60˚ 6 cyl.
                                                                                                                        0˚ ~ 45˚ 8 cyl.
                                                                      Tachometer                            rpm         Lo 0 ~ 1500
                                                                                                                        Hi 0 ~ 7500
                                                                      Point resistance                                  Good/Bad Zone indication
                                                                      (Voltage drop measuring type)
                                                                      Power source                                               DC 6V, SUM 3 x 4
                                                                      Dimensions (L x W x H)      mm                              159 x 92 x 273
                                                                      Mass                          kg                                  1.5




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                    E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A10
                         Engine Service Equipment & Tools
                                                                               ___________________________________
      COMPRESSION GAUGE FOR GASOLINE ENGINE
                                                                    The engine compression gauge is used for reading compression
                                                                    of engine cylinders.
                                                                    The gauge makes is possible to judge whether the pistons, piston
                                                                    rings, gasket and valves are in normal condition or not.




                            AC-1501                                    AC-1503                                                      AC-1504



                          Code No.                          AC-1501                                 AC-1503                                   AC-1504

       Graduation (max)               MPa(kgf/cm2)           2 5(25)                                2.5(25)                                  2.5(25)
       Gauge dia.                            ømm               60                                      60                                       75
       Case dimensions L x W x H               mm         235 x 75 x 45                          290 x 150 x 65                           290 x 150 x 65
       Mass                                     kg             0.8                                    2.0                                      1.65




                                                                _________________________________________
      VACUUM GAUGE FOR GASOLINE ENGINE
                                                                    Vacuum gauge is used for detecting various faulty conditions such
                                                                    as leaky valves, delay of ignition timing, leaky head gaskets and
                                                                    manifold gaskets, deteriorated valve springs, etc.
                                                                     Code No.                                                          AC-1601
                                                                     Vacuum gauge                                                     ø75mm
                                                                                                                               –0.1MPa(760 mm/Hg)
                                                                     Hose                                                          1,000 mm x 1
                                                                     Case dimensions                                            230 x 120 x 50 mm
                                                                     Mass                                                              1.2 kg




                                                 ____________________________________________________
      VACUUM FUEL PUMP GAUGE
                                                                    This gauge is used for test of fuel line, vacuum leaks and check of
                                                                    leaky valves, timing, fuel pump vacuum and gasoline leakage.

                                                                                     Code No.                                           AC-1901
                                                                     Gauge                                dia                       ø60 mm
                                                                                                   Max. scale                 –0.1MPa(76 cm/Hg)
                                                                     Graduations                                             0.05MPa(0.5 kgf/cm2)
                                                                     Hose length                                                   1,500 mm
                                                                     Case dimensions                                          265 x 120 x 70 mm
                                                                     Mass                                                            1.5 kg
                                                                     Standard accessories                                 Double-end rubber connector
                                                                                                                          Single-end rubber connector
                                                                                                                              Rubber hose 1.5 m
                                                                                                                                Hose connector
                                                                                                                                   4 adaptors




                                                            Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd     Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,                +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                                +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                     E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                     A11
                                        _______________________________________________________
    FUEL PRESSURE GAUGE
                                                                  This gauge is useful for maintenance of electro control fuel injec-




                                                                                                                                                                                ENGINE SERVICE
                                                                  tion system gasoline engine.

                                                                          Code No.                         AC-1913                             AC-1914
                                                                   Gauge dia.                            75 mm                              100 mm
                                                                         max. scale                1.0MPa(10 kgf/cm2)                  1.0MPa(10 kgf/cm2)
                                                                         graduations              0.01MPa(0.1 kgf/cm2)                0.01MPa(0.1 kgf/cm2)
                                                                   Hose                               ID 6 & 7 mm                         ID 3 & 5 mm
                                                                   Mass                                  1.8 kg                              2.0 kg




                                                                                                                                                                                A
                AC-1913                      AC-1914




                                                                   _______________________________________
    COMPOUND GAUGE FOR TURBO CHARGER
                                                                  This gauge is useful for maintenance of turbo-charger.

                                                                                   Code No.                                           AC-1952
                                                                   Gauge dia.                                                    75 mm
                                                                         scale                                               0.1~0~–0.1MPa
                                                                                                                       (+1 kgf/cm2 ~ –760 mm/Hg)
                                                                          graduations                              0.005MPa(0.05 kgf/cm2 & 20 mm/Hg)
                                                                   Hose length                                                  2,000 mm
                                                                   Adapters                                                         4
                                                                   Case dimensions (L x W x H)                             290 x 150 x 68 mm
                                                                   Mass                                                           1.5 kg




                                         ______________________________________________________
    SPARK PLUG GAP GAUGE
                                                                  This gauge measure the spark plug electrode gaps, includes elec-
                                                                  trode adjusting tool.

                                                                          Code No.                         AC-3103                             AC-3104
                                                                   Gauge size           mm      0.5, 0.6, 0.7, 0.8, 0.9, 1.0        0.6, 0.7, 0.8, 1.1, 1.3, 1.5
                                                                   Overall length       mm                  ø50                                 ø50
                                                                   Mass                  g                  20                                   20




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                    E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A12
                       Engine Service Equipment & Tools
                                                      _____________________________________________
      SPARK PLUG CLEANER AND TESTER
                                                                                   .eps
                                                                  To clean the spark plug. To test the gap and the insulation of the
                                                                  spark plug.
                                                                         Code No.                          AC-3202                             AC-3204
                                                                   Power source                         AC 100V                            AC 100V
                                                                   Discharge voltage                    10,000V                            10,000V
                                                                   Air pressure                    0.9MPa(9 kgf/cm2)               0~1.5MPa(0 ~ 15 kgf/cm2)
                                                                   Plug fitting                      14 mm, 12 mm                       14 mm, 12 mm
                                                                   Rubber adapter                 14mm, 12mm, 10mm
                                                                   Dimensions                     350 x 475 x 255 mm                   400 x 350 x 300 mm
                                                                   (L x W x H)
                                                                   Shipping mass                            7.5 kg                                8 kg

                                                                  Various voltages are available upon request
                                                                  Option : Code No. AC-3301
                                                                           Spark plug cleaning compound. 2 kg/can




                                                         ___________________________________________
      ELECTRONIC IGNITION SPARK TESTER
                                                                  For pre-testing electronic ignitions. Saves time because you’ll
                                                                  know if the ignition is causing problems in a non-starting car.

                                                                                   Code No.                                            AC-3404
                                                                                   Model No.                                            7230

                                                                                       Mass                                              85 g




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                      A13
       TEST & INSPECTION EQUIPMENT & TOOLS
                                                                                                          ________________________




                                                                                                                                                                                 ENGINE SERVICE
    CYLINDER HEAD AND CYLINDER BLOCK PRESSURE TESTER
                                                                   This device is used for air-tight test of cylinder heads, and cylin-
                                                                   der block coolant circuit.

                                                                                 Code No.                                         AA-0502
                                                                    Maximum head capacity
                                                                                      Length                                   1,000mm




                                                                                                                                                                                 A
                                                                                        Width                                   400mm
                                                                                       Height                                   300mm
                                                                    Tank capacity                                                 420
                                                                    Heating elements                                           2 x 4 5kW
                                                                    Hydraulic hoist                                             0.37kW
                                                                    Gear-motor                                                  0.25kW
                                                                    Rotation speed                                              4Tr/min.
                                                                    Up and down time                                       600 mm at 10 sec.
                                                                    Thermostat                                                  0 - 70˚C
                                                                    Electric power                                         AC.3-Phase 16KVA
                                                                    Dimensions
                                                                                      Length                                      1,700mm
                                                                                        Width                                     1,000mm
                                                                                       Height                                     1,700mm
                                                                    Mass                                                            380kg

                                                                   Various voltage are available upon request




    Standard Accessories
    009472 : 2 cylinder head holding flat parallels                  010053 :          20 rectangular closures, 2-3/8" x 1-1/4"
    010361 : 8 clamping blocks with threaded rods and nuts                                 (60 x 30 mm)
    010367 : 4 long clamping bars                                    010054 :          10 rectangular closures, 3-1/8" x 1-1/2"
    010522 : 4 short clamping bars                                                         (80 x 40 mm)
    009962 : clear Plexiglass plate                                  010055 :          10 rectangular closures, 3-7/8" x 1-7/8"
              11-3/4" x 9-1/2" x 1-1/4" (300 x 240 x 30 mm)                                (100 x 50 mm)
    010517 : clear Plexiglass plate                                  010360 :          1 rectangular closure, 7-3/4" x 11-1/2"
              19-3/4" x 7-3/4" x 1-1/4" (500 x 200 x 30 mm)                                (200 x 290 mm)
    009964 : clear Plexiglass plate                                  009879 :          1 plate holder
              33-3/4" x 10-1/2" x 1-1/4" (860 x 270 x 30 mm)         010033 :          16 mm service wrench
    010056 : 1 set of assorted shapes rubber closures                010212 :          1 instruction and spare parts manual
    010050 : 25 round closures, dia. 1-1/4" (30mm)                   010061 :          recessed fluorescent light
    010051 : 15 round closures, dia 1-1/2" (40mm)                    010059 :          2 adjustable parallels for wedge shape cylinder
    010052 : 10 round closures, dia 2-3/8" (60mm)                                      heads custom made closures


                                     _________________________________________________________
    VALVE SPRING TESTER
                                                                   This tester measures the compression pressure of coil springs,
                                                                   such as valve spring and clutch springs.

                                                                              Code No.                          AA-2201                          AA-2202
                                                                    Capacity                 N(kg)            1,180(120)                       2,250(240)
                                                                                                          (Graduations 1 kg)               (Graduations 2 kg)
                                                                    Spring ( ø x L)    mm                      80 x 210                         80 x 210
                                                                    Dimensions (LxWxH) mm                  200 x 335 x 550                  200 x 335 x 500
                                                                    Mass                 kg                      23.5                             23.5
                                                                    Standard accessories                  Hex wrench      1                Hex wrench      1
                                                                                                          Handle          1                Handle          2
                                                                                                          Vinyl cover     1                Vinyl cover     1




                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                      Fax:
Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                              +44 (0)2075 043787
East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                              +44 (0)1273 675740
United Kingdom.                                    E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
A14
                       Engine Service Equipment & Tools
                                                         ______________________________________________
      CYLINDER GAUGE (Carl-Mahr Type)
                                                                         This gauge measures the bore of cylinder and checks the cylin-
                                                                         der taper and out of round.

                                                                                                         Range                 Graduations               Max. Dep h
                                                                              Code No.
                                                                                                          mm                      mm                        mm

                                                                               AA-3405                  10 ~ 18                     1/100                     130
                                                                               AA-3406                  18 ~ 35                     1/100                     130
                                                                               AA-3407                  35 ~ 60                     1/100                     200
                                                                               AA-3408                  35 ~ 80                     1/100                     200
                                                                               AA-3409                  50 ~ 100                    1/100                     250
                                                                               AA-3410                  50 ~ 150                    1/100                     250
                                                                               AA-3411                 100 ~ 160                    1/100                     300
                                                                               AA-3412                 160 ~ 250                    1/100                     400
                                                                               AA-3413                 250 ~ 450                    1/100                     500

                                                                         Remarks : Necessary tools : Micrometer, Micrometer stand

                                                                                                        ___________________________
      CYLINDER LINER HEIGHT GAUGE WITH HOLD DOWN BAR
                                                                         Code No. AA-3415 (Model No. 7106)
                                                                         This set lets you meet those exacting manufacturing specs, nec-
                                                                         essary for proper diesel engine performance. It accurately mea-
                                                                         sures cylinder bore flatness and depth. The hold down bar cor-
                                                                         rectly seats the liner for accurate measurement of liner protru-
                                                                         sion. This easy to read dial is in 0.001" graduations, 1.000" range.
                                                                         Mass 3 kg.



                                       ________________________________________________________
      PISTON FEELER GAUGE
                                                                         This gauge measures the clearance of piston to cylinder.

                                                                                                    Leaf length             Leaf width               Leaf thickness
                                                                              Code No.
                                                                                                       mm                      mm                         mm

                                                                                                                                                .03, .04, .05, .06, .07
                                                                              AA-3502                    200                      12.7          .08, .10, .15, .20, .30
                                                                                                                                                      (10 leaves)


                                              ____________________________________________________
      CONNECTING ROD ALIGNER
                                                                         This device facilitates accurate inspection of connecting rods (twist
                                                                         and bend of a connecting rod, parallelism between the piston con-
                                                                         nected to a connecting rod and the rod, and tilting of piston hole).
                                                      Code No.                            AA-4201                        AA-4202                        AA-4203
                                                                                      Passenger car,                                                  Construction
                                        Application                                                                     Truck, Bus
                                                                                        Light truck                                                    equipment
                                        Connecting rod bearing dia.   mm                 30 ~ 75                          50 ~ 105                      80 ~ 120
                                        Connecting rod length         mm                 65 ~ 300                        150 ~ 420                     max. 520
                                                (Center distance)
                                        Dimensions (L x W x H)        mm              145 x 120 x 460                230 x 170 x 650                500 x 260 x 800
                                        Mass                    Approx. kg                   16                             27                             55

                                        Standard accessories
                                                Expansion arbor                                1                              2
                                                Expansion blade                                6                              6                              6
                                                Sea lion                                       1                              2                              1


                          ________________________________________________________________
      PLASTI GAUGE
                                                                         This gauge measures bearing clearance.

                                                                                 Code No.                    Clearance range                          Quantity
                                                                                 AA-4601                    0.025 ~ 0.076 mm                    Green               12
                                                                                 AA-4602                    0.051 ~ 0.152 mm                    Red                 12
                                                                                 AA-4603                    0.102 ~ 0.229 mm                    Blue                12


                                                                 Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd       Telephone:                                                                          Fax:
  Suite 6, St Georges House, Brighton,                  +44 (0)1273 686870                                                                  +44 (0)2075 043787
  East Sussex,BN2 1ED,                                  +44 (0) 7745790024                                                                  +44 (0)1273 675740
  United Kingdom.                                       E-Mail: sales@hemsltd.com                                                           www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                    A15
                                                         ___________________________________________
    FUEL CONSUMPTION METER (Portable)
                                                                 The measuring system is periodic pulse accounting/computing




                                                                                                                                                                               ENGINE SERVICE
                                                                 system.
                                                                 Operation is done by pushing key board. (Dialogical Software)


                                                                             Code No.                                           AA-5607
                                                                  Measuring Fluid                       Gasoline, Light oil, Kerosene and A Heavy Oil
                                                                  Measuring Range
                                                                    Fuel, Consumption                      0.001 ~ 999.999




                                                                                                                                                                               A
                                                                    Testing Period                      max.99h 59min. 59sec.
                                                                    Fuel consumption Rate               0.1 ~ 99.9km/
                                                                                  (A sensor)               (0.1 ~ 500 /h)
                                                                                  (B sensor)               (0.1 ~ 50 /h)
                                                                    Average Speed                          0.1 ~ 999.9 km/h
                                                                    Accuracy                            Less than ±1%
                                                                  Construction
                                                                    (1) Main Unit
                                                                        Power source           Car Battery (12V, 24V)
                                                                                               Rechargeable Built-in Battery
                                                                         Operation Temperature 0˚~50˚C
                                                                         Size (LxWxH), Mass 190 x 138 x 45 mm 0.7 kg
                                                                     (2) Printer Unit
                                                                         Printing Method       Mechanical Dot Matrix
                                                                         Printing Speed        Approx. 0.8 line/sec.
                                                                         Letters               27 letters/line 58mm (W) x 7m/roll
                                                                     (3) Accessories           Various necessary cobles
                                                                                               Flow Sensors (A & B)
                                                                                               Carrying Case
                                                                                               Instruction Manual




                                                         Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                   E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A16
                       Engine Service Equipment & Tools
        ENGINE DYNAMOMETER
                                                                        _____________________________________
      SAMPLE LAYOUT OF ENGINE DYNAMOMETER
                                                                  We can supply the engine dynamometer as a package that in-
                                                                  cludes all necessaries accessories as shown in the picture.




                                                                                             (1)   Fuel Tank                        A23
                                                                                             (2)   Fuel Consumption Meter           A21
                                                                                             (3)   Engine Cooling Water Tank        A22
                                                                                             (4)   Engine Dynamometer        A17, 18, 19
                                                                                             (5)   Cooling Water Supply Pump        A23
                                                                                             (6)   Cooling Water Pond
                                                                                             (7)   Engine Stand                     A20
                                                                                             (8)   Engine Bed                       A20




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                           Engine Service Equipment & Tools                                                                                                                                  A17
                                                        _____________________________________________________
    ENGINE DYNAMOMETER (1)
    1) Water Brake (fluid) type (Non reversible type)




                                                                                                                                                                                                   ENGINE SERVICE
       The adjustment of the brake load is effected by rotary valve which is driven by hand wheel or motor driven shaft.
       An exclusive structure and actuation mechanism to prevent errosion from cavitation are used for the internal parts.
       There are no unnecessary protruding parts, and the equipment is compact and light weight.




                                                                                                                                                                                                   A
    Brake
    power
    [PS]




                                      Engine speed [RPM]




                                                                                                                                                       Option : Measuring unit for
                                                                                                                                                                engine condi-
                                                                                                                                                                tions.
                 Brake power       Brake torque      Engine speed Constant torque        Dimensions            Mass
     Code No.                                                                                                               Model
                   Kw (PS)         N m (kgf.m)        min-1(rpm)  range,min-1 (rpm)      (W x D) mm             kg
      AA-5701     88.3 (   120)    281.0 (     28.6) 3,000 ~ 8,000    1,200 ~ 3,000        505 x 396             150         P-1 5
      AA-5702   147.2 (    200)    421.8 (     43.0) 3,330 ~ 6,000    1,210 ~ 3,330        535 x 440             250         P-1 8
      AA-5703    184 0(    250)    702.4 (     71.6) 2,500 ~ 5,500      900 ~ 2,500        640 x 600             340         P-2
      AA-5704   257.6 (    350)   1,402.8 (   143.0) 1,753 ~ 5,000      675 ~ 1,753        740 x 630             420         P-2 5
      AA-5705   368.0 (    500)   2,810.0 (   286.5) 1,250 ~ 4,000      600 ~ 1,250        870 x 700             750         P-3
      AA-5706   515.0 (    700)   4,214.0 (   429.6) 1,167 ~ 3,500      470 ~ 1,167      1,010 x 860           1,350         P-3 5
      AA-5707   735.0 ( 1,000)    6,337.0 (   646.0) 1,110 ~ 3,000      410 ~ 1,110     1,120 x 1,000          1,800         P-4
      AA-5708 1,104.0 ( 1,500) 10,546.0( 1,075.0) 1,000 ~ 2,750         400 ~ 1,000     1,190 x 1,140          2,200         P-4 5
      AA-5709 1,472 0 ( 2,000) 17,560.0( 1,790.0)      800 ~ 2,500      400 ~ 800       1,250 x 1,340          3,300         P-5
      AA-5712 3,680.0 ( 5,000) 32,314.0( 3,294.0) 1,087 ~ 1,600         425 ~ 1,087     1,510 x 1,500          3,800         P-7
     Remarks;
     Type A : Direct manual operation type
     Type C : Remote electric opera ion type
     Type D : Automatic operation type
     Type M : with Measuring unit for engine

     Ordering guide; Code No. -Type
     example AA-5705-CM (Remote electric operation type with engine measuring unit)




                                                                             Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd                      Telephone:                                                                      Fax:
Suite 6, St Georges House, Brighton,                                 +44 (0)1273 686870                                                              +44 (0)2075 043787
East Sussex,BN2 1ED,                                                 +44 (0) 7745790024                                                              +44 (0)1273 675740
United Kingdom.                                                      E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
A18
                             Engine Service Equipment & Tools
                                                           _____________________________________________________
      ENGINE DYNAMOMETER (2)
      2) Water Brake (fluid) type (Reversible type)




      Brake
      power
      [PS]




                                                Engine speed [RPM]




                  Brake power        Brake torque       Engine speed Constant torque       Dimensions            Mass
       Code No.                                                                                                               Model
                    Kw (PS)          N.m (kgf.m)         min-1(rpm)  range,min-1 (rpm)     (W x D) mm             kg
       AA-5781     73.6 (   100)    210.7 (     21 5)   3,330 ~ 8,000   1,500 ~ 3,300       505 x 396              150       PRS-1.5
       AA-5782    110.4 (   150)    421.8 (     43 0)   2,500 ~ 5,000   1,210 ~ 2,500       640 x 600              340       PRS-2
       AA-5783    184.0 (   250)    876.0 (     89 3)   2,000 ~ 5,000    850 ~ 2,000        740 x 630              420       PRS-2.5
       AA-5784    294.4 (   400)   1,403.0 (   140 3)   2,000 ~ 4,000    575 ~ 2,000        870 x 700              750       PRS-3
       AA-5785    368.0 (   500)   2,810.0 (   286 5)   1,250 ~ 3,500    545 ~ 1,250      1,010 x 860            1,350       PRS-3.5
       AA-5786    515.0 (   700)   4,216.0 (   429 6)   1,167 ~ 3,000    460 ~ 1,167      1,120 x 1,000          1,800       PRS-4
       AA-5787    736.0 ( 1,000)   7,024.0 (   716 0)   1,000 ~ 2,750    450 ~ 1,000      1,190 x 1,140          2,200       PRS-4.5
       AA-5788 1,178 0( 1,600) 12,647 0( 1,289 0)        889 ~ 2,500     500 ~ 889        1,250 x 1,340          3,300       PRS-5
       AA-5789 1,840 0( 2,500) 1,7560 0( 1,790 0)       1,000 ~ 2,000    480 ~ 1,000      1,250 x 1,340          3,500       PRS-5.5
       AA-5790 2,944 0( 4,000) 24,590 0( 2,507 0)       1,140 ~ 1,600    435 ~ 1,140      1,510 x 1,500          3,800       PRS-6
      Remarks;
      Type A : Direct manual operation type
      Type C : Remote electric operation type
      Type D : Automatic operation type
      Type M : with Measuring unit for engine

      Ordering guide; Code No. - Type
      example AA-5724-CM (Remote electric operation type with engine measuring unit)



                                                                               Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                       Telephone:                                                                       Fax:
  Suite 6, St Georges House, Brighton,                                  +44 (0)1273 686870                                                               +44 (0)2075 043787
  East Sussex,BN2 1ED,                                                  +44 (0) 7745790024                                                               +44 (0)1273 675740
  United Kingdom.                                                       E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
                           Engine Service Equipment & Tools                                                                                                                             A19
                                                       _____________________________________________________
    ENGINE DYNAMOMETER (3)
    3) Water Brake (fluid) portable type




                                                                                                                                                                                              ENGINE SERVICE
       The adjustment of the brake load is effected by rotary valve which driven by hand wheel or motor driven.
       An exclusive structure and actuation mechanism to prevent errosion from cavitation are used for the internal parts.
       There are no unnecessary protruding parts, and the equipment is compact and light weight.
       Features;
       (1) Light weight and compact.
       (2) It can be connected directly to the flywheel of engine.




                                                                                                                                                                                              A
       (3) The open-air test is also possible.
       (4) Simple construction, easy operation, excellent stability and extraordinary durability.



     A:Direct Manual Operation                                                     C:Remote Electric Operation




        1.   Main body of PTB-direct manual operation         1                       1. Main body of PTB remote operation                    1
        2.   Loal cell and attaching table                1 pair                      2. Load control actuator with control wire (1.5m) and
        3.   Rotary detector with signal cord (5m)            1                          power source cord (5m) 1
        4.   Removable load control handle                    1                       3. Handy type control box* with operation cord (10m) 1
        5.   Hose for water supply (1.5m)                     1                       4. Load cell and attaching table with signal cord (10m)
        6.   Portable type indicator model FLA-102RV with                                                                                 1 pair
             power source cord (5m)                           1                       5. Rotary detector with signal cord (10m)               1
                                                                                      6. Hose for water supply (1.5m)                         1
                                                                                      7. Portable type indicator model FLA-102RV with
                                                                                         power source cord (5m)                               1
                                                                                      * Note 2: It is attachable to the optional engine measuring unit
                                                                                               (model TPS-II)


                                                                         Dimensions
                Brake power        Brake torque        Engine speed                                                   Mass
     Code No.                                                          (W x D x H) mm           Remarks
                  Kw (PS)          N.m (kgf.m)         Max.min-1 (rpm)                                                 kg
                                                                          (Type:T)
     AA-5767      22.1 (   30)    70.26 (      7.16)       8,000      453 x 160 x 275         T or Y type                  7
     AA-5768      44.2 (   60)   140.50 (     14.30)       8,000      467 x 170 x 303                                    10
     AA-5769      73.6 ( 100)    245.90 (     25.10)       6,500      483 x 175 x 345                                    12
     AA-5770     110.4 ( 150)    351.30 (     35.81)       6,500      608 x 205 x 390                                    17
     AA-5771     147.2 ( 200)    456.70 (     46.60)       5,000      668 x 225 x 452                                    23
     AA-5772     220.8 ( 300)    843.10 (     85.90)       3,500      708 x 265 x 542                                    38
     AA-5773     368.0 ( 500) 1,757.00 ( 179.10)           3,000      788 x 305 x 632                                    70
     AA-5774     588.8 ( 800) 3,509.40 ( 358.10)           2,000      810 x 500 x 730          Y type only              100
     AA-5775     736.0 (1,000) 4,211.10 ( 429.70)          2,400      845 x 679 x 820          Y type only              120
    Remarks;
    Type A : Direct manual operation type                                   T) Flywheel mounting type                          Y) Flywheel housing mounting type
    Type B : Remote manual operation type
    Type C : Remote electric operation type
    Type D : Automatic operation type
    Type T : Flywheel mounting type
    Type Y : Flywheel housing mounting type
    Type M : with Measuring unit for engine

    Ordering guide; Code No. - Type
    example AA-5772-BM (Remote manual opera ion type with Measuring unit for engine)

                                                                        Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd                Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                           +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                           +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                                E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A20
                       Engine Service Equipment & Tools
                                                                                               ____________________________
      SPECIAL ACCESSORY SET FOR ENGINE DYNAMOMETER
                                                                  Contents
                                                                  1. Engine stand and bed                                                              1 set
                                                                  2. Fuel tank with stand                                                              1 set
                                                                  3. Cooling water tank with stand                                                     1 set
                                                                  4. Water supply pump for dynamometer                                                 1 unit
                                                                  5. Fuel consumption gauge (burette)                                                  1 set
                                                                  6. Coupling ass’y for dynamometer                                                    1 pc.
                                                                  7. Universal joint                                                                   1 set
                                                                  8. Safety cover                                                                      1 set
                                                                  9. Water supply pump for engine                                                      1 unit

                                                                              Code No.                              Applicable dynamometer
                                                                            AA-5701-01                              up to 75kw (100PS) class
                                                                            AA-5702-01                              up to 110kw (150PS) class
                                                                            AA-5703-01                              up to 150kw (200PS) class
                                                                            AA-5704-01                              up to 220kw (300PS) class
                                                                            AA-5705-01                              up to 300kw (400PS) class
                                                                            AA-5706-01                              up to 450kw (600PS) class
                                                                            AA-5707-01                              up to 600kw (800PS) class
                                                                            AA-5708-01                              up to 750kw (1,000PS) class
                                                                            AA-5709-01                              up to 1,100kw (1,500PS) class
                                                                            AA-5710-01                              up to 1,875kw (2,500PS) class




                                                                                            _____________________________
      ENGINE STAND AND BED FOR ENGINE DYNAMOMETER




                                                                                                         AA-5705-12
                           AA-5705-02




                                                                         Code No.                  Applicable dynamometer                            Type
                                                                       AA-5701-02              up to 110kw(150PS) class                      Stand and bed
                                                                       AA-5705-02              up to 450kw (600PS) class                     Stand and bed
                                                                       AA-5708-02              up to 1,100kw (1,500PS) class                 Stand and bed
                                                                       AA-5705-12              up to 450kw (600PS) class                     Stand with casters




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                       Engine Service Equipment & Tools                                                                                                                              A21
                                                                                 ______________________________________
    GRAVITY TYPE FUEL CONSUMPTION METER
                                                                             This meter measures the weight of fuel consumed directly in or-




                                                                                                                                                                                           ENGINE SERVICE
                                                                             der of “gram”, using load cell and displays the time that the amount
                                                                             of fuel pre-set is consumed.

                                                                                             Code No.                             AA-5605                     AA-5606
                                                                               Read out device
                                                                                  Weight (Pre-set)          g                    1 ~ 999                      1 ~ 999
                                                                                  accuracy                                   ±0.5% FS ±1g                 ±0.5% FS ±1g
                                                                               Time (Digital)             sec                 0.01 ~ 99.99                 0.01 ~ 99.99




                                                                                                                                                                                           A
                                                                                  accuracy                                  ±0.01%, ±0.05sec             ±0.01%, ±0.05sec
                                                                               Weight sensing device
                                                                                  Capacity of measuring vessel                      2,800                       7,400
                                                                                                      m (cc)
                                                                                  Measuring range           g                 100 ~ 1,000                   400 ~ 2,000
                                                                               Hose                      mm                      ø 14.5                         ø 20
                                                                               Electric supply                              AC 100V 50/60Hz              AC 100V 50/60Hz
                                                                               Usable temperature          ˚C                   0 ~ 70˚C                      0 ~ 70˚C
                                                                               Mass                        kg                      30                            35
                                                                               Applicable engine                              Up to approx.                 Up to approx.
                                                                                                                             370kw(500 ps.)              1,180kw(1,600 ps.)

                                                                             other voltage are available upon request.
                                                                              _______________________________________
    VOLUME TYPE FUEL CONSUMPTION METER
                                                                             Used in combination with a burette stand (Code No. AA-5613 ~
                                                                             5616) to measure fuel consumption in an engine performance
                                                                             test.




                                                                       AA-5611
                       Code No.                            (Bo h revolutions and consuming                                           AA-5612
                                                         time are measured simultaneously.)                        (Only the fuel consuming ime is measured.)

                     Number of digits indicated     Red luminescent diode indicator digits                       Red luminescent diode indicator five digits
     Time
                     Measuring time                 999.99 sec.                                                  999.99 sec.
     measuring
                     Measuring accuracy             0.01 sec.                                                    0.01 sec.
     section
                     Indication time                Any duration of time in manual operation                     Any duration of time in manual operation
     Revolution      Number of digits indicator     Red luminescent diode indicator four digits                                               ––
     measuring
     section         Measuring accuracy             ±1 count                                                                                  ––
                     Electric power source          AC100V 22VC                                                  AC 100V 22VA
     General
                     Applicable temperature range   –10˚C to +50˚C                                               –10˚C to 50˚C
     specification
                     Dimensions                     360 x 320 x 99 mm                                            360 x 320 x 99 mm
                        Mass                                              6 kg                                                              5 kg
     Other necessary accessories                    Electromagnetic type revolution detector
                                                    and cord                                                                                 ––

    other voltage are available upon request.

                                       ____________________________________________________________
    BURETTE STAND (1)
                                                                             Used in combination with a fuel consumption meter (Code No.
                                                                             AA-5611 or AA-5612) to measure fuel consumption in an engine
                                                                             performance test.

                                                                                   Code No.             AA-5613            AA-5614            AA-5615             AA-5616
                                                                              Measurable
                                                                               capacity (m )               100                200                  400               800

                                                                              Measurable
                                                                               flow ( /h)                   40                 40                  80                150

                                                                              Dimensions
                                                                               LxWxH (mm)            300x330x1,230 300x330x1,230 300x330x1,230 300x330x1,450

                                                                              Mass (kg)                     26                 26                  26                 28




                                                                     Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd            Telephone:                                                                        Fax:
Suite 6, St Georges House, Brighton,                       +44 (0)1273 686870                                                                +44 (0)2075 043787
East Sussex,BN2 1ED,                                       +44 (0) 7745790024                                                                +44 (0)1273 675740
United Kingdom.                                            E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
A22
                       Engine Service Equipment & Tools
                                                                               ___________________________________
      BURETTE TYPE FUEL CONSUMPTION METER (2)
                                                                           Code No.                  Applicable dynamometer                          Capacity
                                                                           AA-5617               up to 110kw (150PS) class                     25 - 50 - 75 m (cc)
                                                                           AA-5618               up to 220kw (300PS) class                     100 - 200 m (cc)
                                                                           AA-5619               up to 450kw (600PS) class                     200 - 400 m (cc)
                                                                           AA-5620               up to 750kw (1,000PS) class                200 - 300 - 500m (cc)
                                                                           AA-5621               up to 1,875kw (2,500PS) class 300 - 500 -1,000m (cc)




                                                    _________________________________________________
      ENGINE COOLING WATER TANK
                                                                           Code No.                 Applicable dynamometer                          Capacity
                                                                         AA-5704-03              up to 220kw (300PS) class                            100
                                                                         AA-5708-03              up to 1,100kw (1,500PS) class                        200




                      ___________________________________________________________________
      FUEL TANK
                                                                          Code No.                  Applicable dynamometer                          Capacity
                                                                         AA-5701-04              up to 110kw (150PS) class                              25
                                                                         AA-5704-04              up to 220kw (300PS) class                            100
                                                                         AA-5708-04              up to 1,100kw (1,500PS) class                        200




                                                            Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd     Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,                +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                                +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                     E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                        Engine Service Equipment & Tools                                                                                                                  A23
                                                                             ___________________________________
    UNIVERSAL JOINT FOR ENGINE DYNAMOMETER




                                                                                                                                                                                ENGINE SERVICE
                                                                         Code No.                 Applicable dynamometer                             Type
                                                                       AA-5701-05               up to 110kw (150PS) class                        Standard
                                                                       AA-5704-05               up to 220kw (300PS) class                        Standard
                                                                       AA-5706-05               up to 450kw (600PS) class                        Heavy duty
                                                                       AA-5707-05               up to 750kw (1,000PS) class                      Heavy duty
                                                                       AA-5708-05               up to 1,500kw (2,000PS) class                    Heavy duty




                                                                                                                                                                                A
                                                         ___________________________________________
    SAFETY COVER FOR UNIVERSAL JOINT
                                                                              Code No.                                 Applicable dynamometer
                                                                            AA-5701-06                           up to 110kw (150PS) class
                                                                            AA-5706-06                           up to 450kw (600PS) class
                                                                            AA-5707-06                           up to 600kw (800PS) class
                                                                            AA-5708-06                           up to 1,100kw (1,500PS) class




                                                                   _______________________________________
    WATER PUMP FOR ENGINE DYNAMOMETER




            Code No.               Motor             Inlet port                      Outlet port                       Applicable dynamometer
           AA-5703-07              0.4kw               50A                                40A                          up to 150kw (200PS) class
           AA-5704-07             0.75kw               50A                                40A                          up to 220kw (300PS) class
           AA-5705-07              1.5kw               65A                                50A                          up to 370kw (500PS) class
           AA-5706-07              2.2kw               65A                                50A                          up to 600kw (800PS) class
           AA-5708-07              3.7kw               80A                                65A                          up to 750kw (1,000PS) class
           AA-5709-07              5.5kw               80A                                65A                          up to 1,500kw (2,000PS) class




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
A24
                       Engine Service Equipment & Tools
                                                                       ______________________________________
      MEASURING UNIT FOR ENGINE CONDITIONS
                                                                    Measuring items
                                                                    1. Digital tachometer, 0 ~ 9,999min-1(rpm)
                                                                    2. Digital load meter, 0 ~ 1,999kg
                                                                    3. Digital thermometer, 0 ~ 999ûC
                                                                    4. Serect switch for digital thermometer, 10 - ch.
                                                                    5. Ararm adjuster for engine cooling water temp.
                                                                    6. Oil pressure gauge for engine, 0~1MPa(0 ~ 10kg/cm2)
                                                                    7. Fuel pressure gauge,0~2.5MPa(0 ~ 25kg/cm2)
                                                                    8. Boost pressure gauge, 0~0.3MPa(0 ~ 3kg/cm2)
                                                                    9. Engine suction pressure gauge, 0~-0.1MPa(0 ~ -760mmHg)
                                                                    10. Ammeter, -150 ~ 0 ~ +150A
                                                                    11. Volt meter, 0 ~ 24V
                                                                    12. Warning lamp of engine oil pressure
                                                                    13. Warning lamp of engine cooling water temp.
                                                                    14. Starter switch
                                                                    15. Pre-heat indicator
                     Code No. AA-5701-08
                                                                    18. Ararm
                                                                    19. Circuit breaker




                                                                                                       __________________________
      DATA PROCESSING SYSTEM FOR ENGINE DYNAMOMETER

                                                                                                                                  Engine Performance Test

                                                                                            Date 91/05/28, 16 30-16 37 56
                                                                                       Max.torque TQmax 24.5kgm/2829, RPM-D
                                                                                       Max.output PSmax 111.62PS/3778,RPM-D




                  Code No. AA-5701-09                                                                               Speed(RPM)

                                                                                    Engine model
                                                                                                                          Wet Bulb temperature     21 C
                                                                                            User
                                                                                                                          Dry bulb temperature     20 C
                                                                                           Serial
                                                                                                                                   Atmosphere      755mmHg
                                                                                        Remarks
                                                                                                                          Correction coefficient   1,000(JIS-8013)




      Personal computer(option)           Instrumentation(example)
        (NINIMUM SPECIFICATION)
        IBM PC or equivalent                  Load                              kg                        Temperature(Engine, cylinder)      °C
          Intel Pentium P133                  Revolution(Dynamometer) min-1(rpm)                          Temperature(Engine, oil)           °C
          PAM 32MB                        3   Revolution(Engine)        min-1(rpm)                        Pressure(Engine, oil)      MPa(kg/cm2)
          HDD 1.6GB                       3   Weight(Fuel)                       g                        Pressure(atmosphere) MPa(mmHg)
          FDD 3.5"1.44MB                  3   Temperature(Dry)                  °C                        Pressure(Engine, inlet air)MPa(mmHg)
          2-serial ports                  3   Temperature(Wet)                  °C                        Pressure(Engine, exhaust)MPa(mmHg)
          1-parallel port                 3   Temperature(Engine, inlet water) °C                         Pressure(Engine, boost) MPa(mmHg)
        Operating system : Windoes 95     3   Temperature(Engine, outlet water) °C                        Engine output                  kW(PS)
                                              Temperature(Engine, inlet air)    °C                      4 Torque                       N.m(kgm)
      AD board                                Temperature(Engine, exhaust)      °C                      4 Fuel comsumption       g/kWh ( g/PSh)
        Input voltage range: 0~10V
        No. of channel     : 32



                                                            Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd     Telephone:                                                                              Fax:
  Suite 6, St Georges House, Brighton,                +44 (0)1273 686870                                                                      +44 (0)2075 043787
  East Sussex,BN2 1ED,                                +44 (0) 7745790024                                                                      +44 (0)1273 675740
  United Kingdom.                                     E-Mail: sales@hemsltd.com                                                               www.hemsltd.com
                         Engine Service Equipment & Tools                                                                                                                              A25
                                                                        __________________________________________
    DIESEL FUEL INJECTION PUMP TESTER
    The performance of a diesel engine depends to a great degree upon the correct accurate adjustment of its injection pump.




                                                                                                                                                                                             ENGINE SERVICE
    However accurate, rapid testing and calibration pumps is only possible with a modern fuel injection pump stand.
    Test Items
       Test and adjustment of injected fuel volume
       Test of centrifugal governor
       Test of vacuum governor and leak check of vacuum chamber
       Adjustment of injection timing
       Pressure test of feed pump




                                                                                                                                                                                             A
       Quality and lift test on fuel feed pump




                         AB-0128                                            AB-0122                                                              AB-0125



                Code No.                        AB-0128-10/20                                         AB-0122                                         AB-0125
     Pump applicatins
                                                       12                                                 18                                               8
      (Q'tv of plunger)
     Drive motor
      Power & speed change         DC 7.5/15kW. thyristor controlled                   DC 22/30 kW, thyristor                         DC 5.5kW, expanding pulley
     me hod                                                                            controlled                                     hand wheel controlled
      Speed range                               30~4,000 min-1(rpm)                           0~2,500 min-1(rpm)                             80~3,500 min-1(rpm)
     Calibration system            Advanced an personal computor based                    Bottom dumping test tubes                   8 test tube 0~10 cm3
                                   fuel injection pump tester.                             30 and 135cm3 capactiy                     8 test tube 8~26 cm3
                                   Advanced video metering (AVM) display                                                              Leak off
                                   using LCD screen.                                                                                  0~21, 21~40, 39~60cm3
                                   5~500mm3/stroke capactiy
                                   Back leakage flowmenter
                                   display on LCD screen
                                   50~1500cm3/min or 3~90 liter
     Instrument
       Tachometer                  Numerical display on screen                          Digital type 0~3,000 min-1(rpm)                 Digital type 0~9,999 min-1(rpm)
       Full supply pressure        Numerical & analog display on screen,                           –1~ +4 bar                                       1~ +4 bar
                                                                 1~4 bar
      Full supply temperature      Numerical display on screen, 0~80 C                               Digital type                                   Digital type
      Auxiliary 1                  Numerical & analog display on screen,
                                                                 0~4 bar
      Auxiliary 2                  Numerical & analog display on screen,
                                                                0~16 bar
      Pressure phasing             Numerical display on screen, 80 bar                                 0~7 bar                                             –
      Lube oil                     Numerical display on screen, 7 bar(Op)
      Back leakage                 Numerical display on screen,
                                   Temperature & flow figure
                                   * Unit selectable between
                                   bar, MPa, psi, mmHg, mbar, hPa & kPa

     Phasing standard                               Pressure                                Low & high pressure                                   High pressure
             option                                 Dynamic                                       Electronic                                             –
     Shot count                    Preset 50, 100, 125, 200, 250, 300, 500,            Preset 50, 100, 200, 300 shots                            Preset 100 shots
                                   shots
     Dimension (L x W x H)                   1,845 x 850 x 1,860mm                           1,980 x 850 x 1,800mm                          1,288 x 660 x 1,674mm
     Mass(net)                                        970kg                                          1,300kg                                         488kg



                                                                       Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd             Telephone:                                                                         Fax:
Suite 6, St Georges House, Brighton,                        +44 (0)1273 686870                                                                 +44 (0)2075 043787
East Sussex,BN2 1ED,                                        +44 (0) 7745790024                                                                 +44 (0)1273 675740
United Kingdom.                                             E-Mail: sales@hemsltd.com                                                          www.hemsltd.com
A26
                             Engine Service Equipment & Tools
                                                                                  ________________________________________
      DIESEL FUEL INJECTION PUMP TESTER (2)
                                                                                                     Code No.                                     AB-0153-8/12
                                                                                     Pump applica ions
                                                                                                                                                        8/12
                                                                                     (Q’ty of plungers)
                                                                                     Drive motor                                              AC 3-Phase, 7.5kw
                                                                                       Power & speed change                       Double train variable ratio pulley system
                                                                                       mothod                                     Electrically operated push button control
                                                                                       Speed range                                            80 ~ 4,200 min-1(rpm)
                                                                                                                                  6, 8 or 12 test tube : 0 ~ 21m (cc)
                                                                                                                                                       : 0 ~ 100m (cc)
                                                                                     Calibration system
                                                                                                                                  One : 0 ~ 100m (cc) D. P. A. back plate
                                                                                                                                  All mounted on an illuminated back plate
                                                                                                                                  Electronic, 100 to 1,000 shots in
                                                                                     Shot counting mechanism                      increments of 100
                                                                                                                                  Spill phasing and high pressure phasing
                                                                                     Phasing                                      facilities
                                                                                     Instrument
                                                                                        Tachometer                                0 ~ 5,000 min-1(rpm) (Digital)
                                                                                        Pressure gauge for phasing                0 ~ 600 lbs. in2 (40 bar)
                                                                                        Vacuum for feed pressure
                                                                                                                                  0 ~ 60 lbs. in2 (4 bar)
                                                                                         and vacuum recording
                                                                                        Transfer pressure indication
                                                                                                                                  0 ~ 30 in•Hg (–1 bar)
                                                                                         of rotary pump
                                                                                        Back leak flow                            0 ~ 200 lbs. in2 (14 bar)
                                                                                        Temperature gauge                         0 ~ 60˚C (32 ~ 140˚F)
                                                                                     Dimensions (L x W x H)                                  1,370 x 790 x 1,700 mm
                                                                                     Weight                                                         671 / 673kg




                                                                                                                        _________________________
      DIESEL FUEL INJECTION PUMP TESTER ATTACHMENT KITS
      All test stands are supplied complete with a basic accessory kit. This kit includes mounting brackets for flange mounted pumps
      and base mounted pumps, low pressure pipes and high pressure pipes.
      Drive kits for other types of pumps are available on request.
      Note; Additional pump tool kits will also be needed for pump servicing.


      BASIC KIT-DISTRIBUTOR PUMPS                          DIESEL KIKI                                                    AMERICAN BOSCH
      Kit No.                                              Kit No.                                                        Kit No.
      HF126 Basic kit for Lucas, CAV, DPA,                 13320 N P PES K.                                               HF460 PSB, PSJ, only.
              DPC, DPS, Bosch, Diesel Kiki,                                                                               12001 APE V8 BB (long housing).
              Nippon Denso VE/VA.                          CATERPILLAR                                                    12900 APE V8 BB (short housing).
              Other rotary pump kits available             HF410 Forged body pumps.                                       13100 100 Series IHC (use with HF460).
              on request, e.g. Stanadyne.                  HF560 1100, 3100, (D. I. Engines).                             13370 APE 6B, BB, G.
                                                           HF561                                                          13200 PSB, PSJ & 100 Series (IHC).
      IN-LINE PUMP KITS (Lucas CAV, Bosch)                 HF562 1673, 1674, 1693, D343
      HF125 Basic in line pump kit for CAV and             HF563 3406.
             Bosch pumps including ‘P’ types.              HF564 3208, 3304, 3306.
      HF408 Ford ‘D’ Series flange mount                   HF566 Governor control linkage 1100,
             (Lucas CAV/Bosch).                                  1600.
      HF414 Bosch PES A & M (68mm, 85mm,                   13350 3408, 3412.
             95mm, 107mm Spigots).                         13910 3306B
      HF589 Bosch PES 4m and 5m (76mm                      13920 3406B (plus optional drive cou-
             Spigot, 58T spline drive).                          pling).
      13070 Flange mount IHC, PES, V8P      ,.             AI41 Caterpiller injection adapter
      13110 Flange mount John Deere/Mack/                        (AVM & PGM only).
             IHC/AC.                                             (9U5024 adaptor kits are avail-
      13170 Flange mount Deutz/J. Deere/                         able for older test benches).
             IHC/J. I. Case/Mercedes.




                                                                            Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                   Telephone:                                                                        Fax:
  Suite 6, St Georges House, Brighton,                              +44 (0)1273 686870                                                                +44 (0)2075 043787
  East Sussex,BN2 1ED,                                              +44 (0) 7745790024                                                                +44 (0)1273 675740
  United Kingdom.                                                   E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                     A27
                                                                   _______________________________________
    MOBILE TEST UNIT FOR CUMMINS PT PUMP
                                                                  The unit is simply pushed to the side of a standard test stand




                                                                                                                                                                                ENGINE SERVICE
                                                                  (which is only used for driving the pump). The fuel supply and
                                                                  return connections are then made between the pump and the AB-
                                                                  0304. Test plan data is readily available and the AB-0304 pro-
                                                                  vides all the required instrumentation for these tests. This equip-
                                                                  ment can be used in conjunction with any make of test stand
                                                                  which embodies sufficient power and speed range.




                                                                                                                                                                                A
                                                                                      Code No.                                           AB-0304
                                                                   Instrumentation
                                                                      Pump manifold pressure gauge                                  0 ~ 400 lbf/in2
                                                                      Gear pump pressure gauge                                      0 ~ 800 lbf/in2
                                                                      Vacuum gauge (gear pump suc ion)                               0 ~ 30 in•Hg.
                                                                      Main flowmeter                                          Duel scale 75 ~ 620 lb/hr &
                                                                                                                                   600 ~ 2,400 lb/hr
                                                                       Leakage flowmeter                                          10 ~ 760 cm3/min
                                                                       Fuel temperature gauge                                         10 ~ 65˚C
                                                                       Fuel tank                                                      20.5 litres
                                                                       Fuel temperature control                               Water cooler & 1kW heater
                                                                                                                              Automatic 90˚F ±2˚F
                                                                   Air supply
                                                                                                                                     4 ~ –160 lbf/in2
                                                                   (for optional AFC Test Unit)
                                                                   Dimension (L x W x H) approx.                                 560 x 485 x 1,830 mm
                                                                   Mass approx.                                                          67 kg




                                                  _________________________________________________
    CUMMINS PT PUMP TEST STAND
                                                                  This test stand was developed, in conjunction with the Cummins
                                                                  Engine Company’s design staff, to test the full range of Cummins
                                                                  PT fuel pumps. An air supply is needed for testing the A. F. C.

                                                                                      Code No.                                           AB-0306
                                                                   Speed range                                                 450 ~ 4,200 rev/min
                                                                   Speed control                                         Mechanical - Stepless thro range
                                                                   Fuel tank                                                         22.5 litres
                                                                   Fuel temperature control                              Water & 1kW heater
                                                                                                                         accurate to ±2˚F
                                                                   Instrumentation
                                                                      Tachometer                                         Digital accurate to ±1 rev/min
                                                                      Pump manifold pressure gauge                               0.400 lbf/in2 ±0.5%
                                                                                                                                   (0 ~ 40 kgf/cm2)
                                                                      Aneroid air pressure gauge                                   0.30 lbf/in2 ±2%
                                                                      Vacuum gauge                                                    0.30 in Hg
                                                                      Temperature gauge                                       50 ~ 150˚F (10 ~ 65˚C)
                                                                      Main flowmeter                                                  Dual Scale
                                                                                                                                 150 ~ 920 lb/hr and
                                                                                                                                  900 ~ 2,000 lb/hr
                                                                     Leakage flowmeter                                            20 ~ 500 cm3/min
                                                                   Motor                                                                 4kW
                                                                   Dimensions (L x W x H)                                      914 x 609 x 1,727 mm
                                                                   Mass approx.                                                         336 kg




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                    E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A28
                       Engine Service Equipment & Tools
                                 _____________________________________________________________
      INJECTOR TESTER
                                                                                Cummins PT Injector Test Stand -- AB-0405
                                                                                The test stand has been designed in close co-operation with the
                                                                                Cummins engine company to test Cummins PT injectors more
                                                                                accurately and quickly than any previous test stand, without the
                                                                                need for a master injector.

                                                                                                  Code No.                                           AB-0405
                                                                                 Motor                                                        1kW Sychronous
                                                                                 Fuel Tank                                                         36 litres
                                                                                 Fuel temperature control                                   Water & 750W heater
                                                                                 Stroke count                                              Electronic - 50 injections
                                                                                 Cam selection                                                    Cummins
                                                                                 Instrumentation
                                                                                    Test oil temperature                                    Red and Green Zones
                                                                                    Injector output                                          0 ~ 500m (cc) dial
                                                                                    Air pressure                                                     ––
                                                                                    Fuel pressure                                                    ––
                                                                                 Water supply                                               0.28MPa(2.8 kgf/cm2)
                                                                                 Air supply                                                          ––
                                                                                 Dimensions (L x W x H)                                     720 x 986 x 1,370mm
                                                                                 Mass approx.                                                      376 kg




                                   AB-0405




                                                        ___________________________________________________
      CUMMINS MASTER INJECTOR




          Code No.                    AB-0451                                            AB-0452                                                  AB-0453
      Flow                      132 cc / 1,000 stroke                       178 cc / 80% counter stroke                               185 cc / 80% counter stroke
      Size (L x D)                   6" x ø1.5"                                      6" x ø1.5"                                                6" x ø1.5"
      Mass                             1.5 lbs                                         1.5 lbs                                                   1.5 lbs
      Remarks          This is used to set up the injector flow       This is required when checking the                      This is “K” type injector
                       comparator                                     accuracy of the injector flow comparator




                                                                        Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                 Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,                            +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                                            +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                                 E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                       Engine Service Equipment & Tools                                                                                                                             A29
                                _______________________________________________________________
    NOZZLE TESTER
                                                                            They are used for testing injection pressure, injection angle, spray




                                                                                                                                                                                          ENGINE SERVICE
                                                                            pattern, fuel leakage, etc., of the diesel injection nozzle by oper-
                                                                            ating a hand lever.
                                                                            A delivery valve is self-contained for the perfect leakage test.




                                                                                                                                                                                          A
              AB-0501                                           AB-0502                                                            AB-0504




            Code No.                          AB-0501                                          AB-0502                                             AB-0504
      Type                       Mounting on the bench, manually operated        This tester has injection
      Pressure gauge                  0~50MPa(0 ~ 500 kgf/cm2 )                  pressure fine adjusting valve                         0~41MPa(0 ~ 410 kg/cm2)
      Fuel tank                      700m (cc) approx. with filter               and specifications are all the                                 7 liter
      Carton case dimensions             210 x 165 x 460 mm                      same as AB-0501.                                        660 x 830 x 610 mm
      (L x W x H)
      Mass           approx.                      7.3 kg                                                                                             34 kg
      Accessories                Standard fuel injection line
                                              x
                                 Standard (14ø 1.5) 155mm long 1 pc.
                                              x
                                 Standard (12ø 1.5) 155mm long 1 pc.
                                              x
                                 Option (16ø 1.5) 148mm long 1 pc.
                                              x
                                 Option (12ø 1.5) bent type 120mm long




                               ________________________________________________________________
    NOZZLESCOPE
                                                                            For inspection of injector nozzle and needle seats. The special
                                                                            light probe and magnification lens provide perfect viewing of the
                                                                            seat and sac area.

                                                                                      Code No.                           AB-1002                          AB-1003
                                                                              Magnification                              20
                                                                              Peeping scope                       Depth within 95mm
                                                                                                                    Nozzle inside
                                                                                                                      diameter
                                                                                                                     about 6mm
                                                                              Dimensions
                                                                              (L x W x H)              mm             90 x 40 x 160
                                                                              Mass                      g            450 (w/Battery)                  480 (w/Battery)
            AB-1002                            AB-1003                        Wooden case              mm            150 x 80 x 300                   260 x 144 x 76




                                                                    Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd            Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                       +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                       +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                            E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A30
                           Engine Service Equipment & Tools
                                                                                          ___________________________________
      GENERAL PURPOSE MEASURING INSTRUMENT,
      TEST & INSPECTION EQUIPMENT & TOOLS
            Code No.                         Description                                 Code No.                                         Description

      MK     0101 ~ 0103   Sound scope                                            MR        1501 ~ 1505          Screw pitch gauge
             0201          Inspection flash light                                           1601 ~ 1608          Thermometer
             0251 ~ 0253   Flexible fiberscope                                              1702 ~ 1703          Thermometer
             0301 ~ 0305   Dye penetrant metal crack detector                               3801                 Stop watch
             0407 ~ 0424   Magnetic flaw detector                                           1902 ~ 2004          Tachometer
             0501 ~ 0503   Black light                                                      2101 ~ 2104          Hand spring balance
             0702 ~ 0703   Ultrasonic flaw detector                                         2201 ~ 2204          Scale spring balance
             0802          Ultrasonic detector                                              2301 ~ 2303          Hook spring balance
             1201          Sound level meter                                                2401                 Platform scale
             1501          Atomic absorption analyzer                                       2451 ~ 2455          Push-pull scale
             1602          Machine (vibration) analyzer                                     2502 ~ 2505          Rockwell hardness tester
             1603          Portable vibrometer                                              2551                 Vickers hardness tester
       MR    0101 ~ 0116   Vernier caliper (include dial type)                              2601                 Shore hardness tester
             0121 ~ 0122   Digimatic caliper                                                2602                 Hard scope
             0151 ~ 0153   Depth gauge                                                      2652                 Brinell hardness tester
             0207 ~ 0225   Outside micrometer                                               2701 ~ 2703          Standard piece for spark test
             0251 ~ 0256   Digimatic outside micrometer                                     2802 ~ 2804          Standard file for scratch hardness test
             0302 ~ 0303   Tubular inside micrometer                                        2901 ~ 2925          Surface plate
             0406 ~ 0408   Caliper gauge                                                    3001 ~ 3003          Straight edge
             0501 ~ 0506   Dial indicator                                                   3101 ~ 3106          Iron bench level
             0517          Dial test indicator                                              3201 ~ 3210          Square
             0602 ~ 0604   Magnetic base                                                    3301 ~ 3318          V Block
             0801 ~ 0811   Measuring tape                                                   3401 ~ 3406          Surface gauge
             0904 ~ 0907   Straight rules                                                   3601 ~ 3603          Steel compass
             1008 ~ 1010   Thickness gauge                                                  3701 ~ 3706          Firm-joint caliper
             1301 ~ 1304   Involute gear tooth gauge




                                                                       Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,                           +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                                           +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                                E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                    A31
       REPAIR & REBUILDING EQUIPMENT & TOOLS
                             ______________________________________________________________




                                                                                                                                                                               ENGINE SERVICE
    ENGINE HANGER
                                                                 When used with the NT-0763 or NT-0746 floor crane or overhead
                                                                 hoist, this hanger cuts job time and effort. It makes positioning of
                                                                 engines during removal or installation an easy job. Features in-
                                                                 clude a self-locking positioning screw.
                                                                               Code No.                                           AA-0103
                                                                               Model No.                                           1812




                                                                                                                                                                               A
                                                                  Capacity                                                   3,000 kg
                                                                  Angle adjustment                                           max. 30˚
                                                                  Working length                                   762 ~ 1,168 mm (3 positions)
                                                                  Chain (2)                                       ø8 mm 60 cm long with eye hook
          AA-0103                                                 Mass                                                         31 kg




                                  ___________________________________________________________
    MOBILE ENGINE LIFT
                                                                                    Code No.                                          AA-0202
                                                                  Capacity                                                          1,200 kg
                                                                  Clawtable height                                               830 ~ 1,330 mm
                                                                    (Closed-extended)
                                                                  Table inclination degree                                            each 15˚
                                                                    (forward, backward, right and left)
                                                                  Mass                                                                  200 kg




                                                         Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                   E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A32
                             Engine Service Equipment & Tools
                                                                        ____________________________________________
      ENGINE STAND (ENGINE POSITIONER)




                                       AA-0313                                                          AA-0307/0308/0310




                                       AA-0309                                                                     AA-0311




                 Code No.                   AA-0313             AA-0307                AA-0308                   AA-0309                   AA-0310                   AA-0311
                 Model No.                   1726                MEP-1                  MEP-2                    MEP-3H                     MEP-5                    MEP-6E
       Service capacity           kg          500                1,000            2,000               3,000                  5,000            5,400
       Service torque capacity N•m                           5.6(570kg•cm)  10.6(1,079kg•cm)                            49(5,000kg•cm)
       Turning angle          degree          360                 360              360                 360                    360              90
       Drive method                          manual             manual           manual              manual                 manual         motor 2.2kW
       Dimensions (LxWxH)        mm      1,168x901x711      1,180x720x1,020 1,255x1,030x1,090 min. 1,766 x1,210x1,075 1,710x1,566x1,534 4,380x1,570x1,320
                                                                                              max. 2,075
       Mass              approx. kg           45.4                130              240                 375                    500             1,650
      AA-0309 stand raises or lowers engine with a self-contained hydraulic jack. Service torque capacity is measured from the mount plate of the engine stand.
      Option: Various mounting brackets are available upon request.




                                                                                    _______________________________________
      TRANSMISSION ADAPTER KIT FOR AA-0313
                                                                                   Code No. AA-0392 (Model No. 7118)
                                                                                   Transmission adapter kit will convert your engine stand into a
                                                                                   transmission service stand in a matter of minutes. The kit re-
                                                                                   places the adjustable arms of the stand to hold and position the
                                                                                   transmission for repair or overhaul. The transmission is held at
                                                                                   workbench height with three sides fully exposed for working con-
                                                                                   venience. And of course it can be rotated a full 360° for complete
                                                                                   access to all parts. Mass 4.65 kg.




                                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                  Telephone:                                                                        Fax:
  Suite 6, St Georges House, Brighton,                             +44 (0)1273 686870                                                                +44 (0)2075 043787
  East Sussex,BN2 1ED,                                             +44 (0) 7745790024                                                                +44 (0)1273 675740
  United Kingdom.                                                  E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                      A33
                                  ___________________________________________________________
    VALVE SPRING TOOL
                                                                   This tool facilitates disassembly and reassembly of engine valve




                                                                                                                                                                                 ENGINE SERVICE
                                                                   springs. The tool is applicable to all engines only by relocating
                                                                   the adjust pin as necessary.

                                                                                      Code No.                                          AA-0601
                                                                    Overall length                                                      390 mm
                                                                    Mass                                                                 1.1 kg




                                                                                                                                                                                 A
                                                  __________________________________________________
    VALVE LIFTER & COMPRESSOR
                                                                             Code No.                           AA-0703                          AA-0702
                                                                    Opening range       mm                    15 ~ 180                         50 ~ 225
                                                                    Mechanism                                Pinion rack                      Pinion rack
                                                                    Applicable valve type                  Over-head valve                  Over-head valve
                                                                    Dimensions (L x W x H)                                                  365 x 310 x 22
                                                                                        mm
                                                                    Mass                 kg                                                          3.4




                                        _______________________________________________________
    VALVE SEAT CUTTER SET
                                                                        Code No.                                        Description
                                                                                          Complete Assortment for Milling Valve Seat 18~65 mm
                                                                                          dia. (in box).
                                                                                          It comprises: 46 cutters, roughing and finishing, at 30˚ 35˚
                                                                                          and 45˚, outside correcting at 15˚, inside correcting at 75˚;
                                                                                          9 pilots PB 600 to PB 1190, each with expanding bush and
                                                                                          stop ring; 2 cutter holders FSV 20 and FSV21 ; 1
                                                                       AA-1011
                                                                                          extension FSV 25; 2 extractors FSV 30 and FSV 31.
                                                                                          With this assortment one can execute all kind of
                                                                                          operations already shown of roughing, finishing and
                                                                                          reducing on valve seats of all internal combustion and
                                                                                          Diesel engines of normal type and auto-vehicles and
                                                                                          tractors up to a maximum dia. of 65 mm (2-9/16").




                           AA-1011




                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd     Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,                +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                                +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                     E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A34
                       Engine Service Equipment & Tools
                                                                   _______________________________________
      VALVE SEAT AND GUIDE BORING MACHINE
                                                                  Purposes;
                                                                  1. Multi angle valve seat finishing
                                                                  2. Valve seat counterboring
                                                                  3. Valve guide reaming
                                                                  4. Cam bearing line boring (option, AA-1064 only)

                                                                                  Code No.                              AA-1063                    AA-1064
                                                                   Applicable Dimensions of
                                                                                                         mm      1,016 x 500 x 450           1,500 x 600 x 500
                                                                   Cylinder Head (L x W x H)
                                                                   Capacity
                                                                   -Valve Seat                           mm           ø14.5 ~ 50                 ø14.5 ~ 120
                                                                   -Valve Stem                           mm           ø4.5 ~ 10                   ø4.5 ~ 15
                                                                   Chuck Head Traverse
                                                                                                         mm           1,016 x 50                  1,016 x 50
                                                                   (W x D)
                                                                   Stroke of Spindle
                                                                                                         mm                200                        200
                                                                   (up & down)

                                                                   Spindle Motor                          kW               1.2                         1.1

                                                                                                                        0~1,200                    0~1,000
                                                                   Spindle                       min-1(rpm)
                                                                                                                        variable                   variable

                                                                   Air Pressure                   MPa(bar)               0.6(6)                      0.6(6)

                                                                                                                        220V,                       220V,
                                                                   Power Source                                     Single Phase,               Single Phase,
                                                                                                                       50/60Hz                     50/60Hz
                                                                                                                    1,500 x 1,100               2,000 x 1,150
                                                                   Dimensions                            mm
                                                                                                                       x 2,150                     x 2,100

                         AA-1063                                   Mass                                    kg              950                       1,450

                                                                  Various voltage are available upon request.




                                                                  Multi angle seat finishing                          Valve seat counter boring




                          AA-1064

                                                                 Valve guide reaming                                  Cam Bearing Line Boring Fixture




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                    A35
                                                         ___________________________________________
    VIBRO-CENTRIC VALVE SEAT GRINDER
                                                                 The use of this machine in addition to a valve seat reamer is




                                                                                                                                                                               ENGINE SERVICE
                                                                 necessary to completely finish cast iron block hard valve seats
                                                                 and stellite valve seats. This machine is not only applicable to
                                                                 common vehicles, but also applicable to various special vehicles
                                                                 only by providing a pilot stem.

                                                                                    Code No.                                           AA-1101
                                                                                                                               Passenger car, small
                                                                                   Application




                                                                                                                                                                               A
                                                                                                                                & middle size truck
                                                                  Capacity-valve seat                                            ø28 ~ 60 mm
                                                                  Capacity-valve stem                                            ø6 ~ 10 mm
                                                                  Driving motor                                       AC, 1ph 120W 12,000 min-1(rpm)
                                                                  Pilot stem ( ) shows quantity                      ø 7(1), 8(3), 8.73(1), 9(1), 10(1) mm
                                                                  Grinding wheel, each one of                                 ø38, 41, 45, 54 mm
                                                                  roughing & finishing                                     C#60N, GC#80M each 1
                                                                  Carrying case dimensions                                   400 x 400 x 280 mm
                                                                    (L x W x H)
                                                                  Mass                                                           Approx. 17.5 kg
                                                                 Various voltages are available upon request.
                                                                 Option: Diamond dresser, Code No. AA-1201
                                                                        Grinding wheels: Available upon request.




                                                  _______________________________________________
    ECCENTRIC VALVE SEAT GRINDER
                                                                              Code No.                            AA-1103                        AA-1104
                                                                                                         Passenger car, small                  Large size
                                                                             Application
                                                                                                          & middle size truck                  truck, bus
                                                                  Capacity-valve seat ømm                       28 ~ 65                        38 ~ 160
                                                                  Capacity-valve stem ømm                        7 ~ 10                         10 ~ 25
                                                                  Driving motor       AC, W                    1 ph 250                        1 ph 400
                                                                                   min-1(rpm)                    8,000                           3,800
                                                                  Eccentric shaft min-1(rpm)                       21                              15
                                                                  Eccentricity             mm                       1                               1
                                                                  Dressing stand                             0, 15, 20, 30                   0, 15, 20, 30
                                                                    angles                deg.                 45, 60, 75                     45, 60, 75
                                                                  Diamond dresser        carat                     1/3                            1/3
                                                                  Standard pilot steam ømm                  7, 8, 8.6, 9, 10                 10, 11, 12, 13
                                                                  Guide                 ømm                       11.1                            14.2
                                                                  Grinding wheel 45˚ ømm                     30, 32, 35, 38                   45, 53, 63
                                                                                                             42, 45, 53, 55                     each 2
                                                                                                               58 each 1
                                                                  Grinding wheel 30˚           ømm       32, 35, 42, 45 each 1               53, 63 each 2
                                                                  Carrying case
                                                                                                             410 x 470 x 430                450 x 360 x 800
                                                                   (L x W x H)                  mm
                                                                  Mass approx.                   kg                 28 5                             45
                                                                 Various voltages are available upon request.
                                                                 Option: Diamond dresser, Code No. AA-1202
                                                                        Grinding wheels: Available upon request.




                                                         Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                   E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A36
                       Engine Service Equipment & Tools
                                              _____________________________________________________
      VALVE SEAT REMOVER SET
                                                                  This quickly, cleanly and safely removes valve seat inserts that
                                                                  are sticked, cracked or broken, without damage to head or need
                                                                  to rebore or reseat.

                                                                                 Code No.                                           AA-1303
                                                                   Construction                              Basic grinder & puller kit
                                                                                                             Puller collet kit
                                                                                                             (ø30 ~ 57mm)
                                                                   Remarks                                   You can order any puller collet separately.




                            _______________________________________________________________
      VALVE REFACER
                                                                  This is the valve grinder which can also be used for correcting
                                                                  tips of valve stem end, valve lifter, tappet and rocker arm. The
                                                                  double-end collet chuck adopted by this machine permits allover
                                                                  grinding of even the diesel engine valves with large-size stems.

                                                                            Code No.                     AA-1705               AA-1706                AA-1707
                                                                    Chuck capacity
                                                                                           mm           4.0 ~ 14 3            6.0 ~ 16 0             4.0 ~ 14.3
                                                                      (stem dia.)
                                                                    Chuck revolution min (rpm)
                                                                                        -1
                                                                                                        100 ~ 300                  50                160 ~ 830
                                                                    Grinding capacity
                                                                                           mm              101.6                  100                    112
                                                                      (head dia.)
                                                                    Angle grinding
                                                                                            deg.          0 ~ 75˚               0 ~ 75˚                0 ~ 47˚
                                                                    range
                                                                    Grinding wheel
                                                                                    min-1(rpm)   3,450           4,100           3,000
                                                                    revolution
                                                                    Valve length         mm                                    70 ~ 255
                                AA-1705
                                                                    Motor for chuck         w  AC 62 5          AC 80           DC 180
                                                                    Motor for wheel         w   AC 375          AC 750          AC 550
                                                                    Motor for coolant
                                                                                            w    equip          AC 80            equip
                                                                    pump
                                                                    Air supply    MPa(bar)         ––              ––            0.6(6)
                                                                    Dimensions
                                                                                         mm 940 x 599 x 406 500 x 550 x 500 600 x 670 x 710
                                                                      (L x W x H)
                                                                    Mass                   kg    132.7            70              150

                                                                  Various voltages are available upon reruest.



                                                                  Option;
                                                                  O Valve refacing wheel
                                                                   Code No. AA-1711             AA-1712 AA-1713 AA-1714 AA-1715 AA-1716
                                                                   Used for                     Valve head Valve stem Rocker arm Valve head Valve stem
                                                                   Applied for AA-1706                         AA-1705                            AA-1706
                                          AA-1706
                                                                  O Diamond dresser
                                                                   Code No.               AA-1721                     AA-1722                     AA-1723
                                                                   Carat                     1/2
                                                                   Applied for            AA-1705                     AA-1706                     AA-1707




                      AA-1707

                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                      A37
                                ____________________________________________________________
    AIR VALVE LAPPER




                                                                                                                                                                                 ENGINE SERVICE
                                                                                      Code No.                                          AA-1901
                                                                    Air pressure                 MPa(kgf/cm2)                        0.6~0.8(6 ~ 8)
                                                                    Overall length                        mm                              225
                                                                    Mass                                   kg                             1.2
                                                                    Standard accessory                                           ø20, 30, 35, 45, mm
                                                                    (Rubber suction cap)                                               each 1


                                                                   Rubber suction cap (option)




                                                                                                                                                                                 A
                                                                       Code No.            AA-2011             AA-2012              AA-2013             AA-2014

                                                                    Rubber head             ø20mm               ø30mm               ø35mm               ø45mm




                                   __________________________________________________________
    HAND VALVE LAPPER
                                                                      Code No.             AA-1907             AA-1903              AA-1904             AA-1906

                                                                    Rubber head             ø45mm               ø35mm               ø30mm               ø20mm



                                                                   Rubber suction cap (option)
                                                                      Code No.             AA-2006              AA-2002             AA-2003             AA-2005

                                                                    Rubber head             ø45mm               ø35mm               ø30mm                ø20mm




                                            ____________________________________________________
    VALVE LAPPING COMPOUND
                                                                             Code No.                          AA-2101                           AA-2102
                                                                              Volume                              200g                              200g
                                                                               Grain                             Coarse                             Fine




                                                    _______________________________________________
    NOZZLE AND INJECTOR PULLERS
                                                                     Code No.          Model No.                       Description                      Mass (kg)

                                                                      AA-2151             7117          For removing pencil type nozzles                    0.79
                                                                                                        on caterpillar 1100/3208 engine.
                                                                      AA-2153             7107          For pulling injectors on Cummins                    1.08
                                                                                                        N, NH and NTC in-line 6 cyl. And
                                                                                                        903 V8 diesel engines.
                                                                      AA-2157             7451          For removing injection nozzles on                   0.77
              AA-2151                                                                                   Caterpillar 32082 A and 320851 A
                                                                                                        engine.


                                          AA-2157




                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd     Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,                +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                                +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                     E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A38
                       Engine Service Equipment & Tools
                                                                                                ____________________________
      CAM SHAFT BEARING REMOVING AND INSTALLING SET
                                                                    Code No.         Model No.                  Handle bearing I.D.                       Mass

                                                                     AA-2406              817                       28.6 ~ 70 mm                          8.2 kg




                                                    _______________________________________________
      CUMMINS ENGINE TURNING TOOL
                                                                              Code No.                           Model No.                          Mass

                                                                               AA-2407                              7161                          1.96 kg




                                                                                                                                                  ________
      COMPRESSOR DRIVE GEAR COUPLING PULLER FOR CUMMINS 855 IN3 ENGINE
                                                                              Code No.                          Model No.                           Mass

                                                                               AA-2408                              7119                          1.05 kg




                                                                                                                                                            ____
      DRIVE PULLEY PULLER/INSTALLER SET FOR CUMMINS NH AND NTC 855 IN3 ENGINE
                                                                               Code No.                          Model No.                          Mass

                                                                               AA-2409                              7120                          2.44 kg




                              ______________________________________________________________
      TAPPET WRENCH
                                                                            Code No.                           Contents                             Mass

                                                                             AA-2601                 10 x 12, 12 x 14, 17 x 19                      544 g
                                                                                                          each 2 pieces


                                                                          Code No.                     Opening                       Overall length mm

                                                                          AA-2603                       10 x 12                               212
                                                                          AA-2604                       12 x 14                               216
                                                                          AA-2605                       17 x 19                               237




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                            A39
                                                                 ___________________________________________
    TORQUE WRENCH WITH ANGLE SCALE
                                                                         This angle wrench is most suitable for small lot production, disas-




                                                                                                                                                                                       ENGINE SERVICE
                                                                         sembling and assembling, maintenance, and after service where
                                                                         tightening operations by the angle method of head bolts of en-
                                                                         gines and connecting rod assembling bolts are controlled.
                                                                         This angle wrench can be used to back up equipment in produc-
                                                                         tion lines. Also, it can be used as a normal torque wrench.




                                                                                                                                                                                       A
                                                     Angle scale                  Graduation                    Graduation              Wrench                Overall
                                 Code No.         Range(Graduation)               min. - max.                      unit                  size                 length
                                                        deg                     N.m (Snug point)                   N.m                   inch                   mm
                                 AA-2501               360 (2)                    (10) 20 ~ 90                         1                   1/2                  345
                                 AA-2502               360 (2)                    (30) 40 ~ 180                        2                   1/2                  486
                                 AA-2503               360 (2)                    (30) 40 ~ 280                        2                   3/4                  684
                                 AA-2504               360 (2)                    (40) 60 ~ 420                        3                   3/4                  984




                                                        _______________________________________________
    SOCKET FOR ENGINE HEAD BOLT
                                                                         This is used for tightening or removing 12 point bolts mainly used
                                                                         on engines.
                                                                         Compared with hexagonal bolts, the head of 12 point bolts is
                                                                         smaller, and the load is larger.
                                                                         The structure of this sockets give increased wear resistance and
                                                                         strength.
                                                                         This kit can cover a range of bolts with width across flats of 10
                                                                         mm ~ 24 mm (bolt diameter 10 ~ 22 mm).
                                                                                                                                           Wrench          Permissible
                                                                             Code No.            Description               Size
                                                                                                                                            size         torque,N•m(kgm)
                                                                            AA-2551-01            Socket                 10mm                 1/2"          106(10.8)
                                                                            AA-2551-02            Socket                 12mm                 1/2"          182(18.6)
                                                                            AA-2551-03            Socket                 14mm                 1/2"          290(29.6)
                                                                            AA-2551-04            Socket                 17mm                 1/2"          424(43.2)
                                                                            AA-2551-05            Socket                 19mm                 3/4"          604(61.6)
                                                                            AA-2551-06            Socket                 22mm                 3/4"          879(89.6)
                                                                            AA-2551-07            Socket                 24mm                 3/4"         1,127(114.9)
                                                                            AA-2551-08            Adaptor              3/4" x 1/2"             ––               ––
                                                                            AA-2551-09          Hexagon bar              17mm                  ––               ––
                                                                              AA-2551           Set of above 9 tools in metal case




                                                                 Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd        Telephone:                                                                        Fax:
Suite 6, St Georges House, Brighton,                   +44 (0)1273 686870                                                                +44 (0)2075 043787
East Sussex,BN2 1ED,                                   +44 (0) 7745790024                                                                +44 (0)1273 675740
United Kingdom.                                        E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
A40
                             Engine Service Equipment & Tools
                                                                                      ______________________________________
      UNIVERSAL PULLER FOR WET TYPE SLEEVE
                                                                                   Put this universal puller in your shop and sleeve removal head-
                                                                                   aches are over; and risk of damage to engine blocks caused by
                                                                                   makeshift method is ended. This tool does the job faster than
                                                                                   ordinary sleeve pullers because set-up time is slashed. Cone
                                                                                   adjustment positions the puller jaws quickly, locking bar is tight-
                                                                                   ened. To aid in breaking “frozen” sleeves loose, adjustable bridge
                                                                                   is positioned on the cylinder block and the bearing-mounted forc-
                                                                                   ing nut is tightened. Next, bridge is removed and slide hammer
                                                                                   assembly is attached. With a few sharp blows of the hammer,
                                                                                   sleeve is pulled. In most cases, job-time will average less than
                                                                                   two minutes per cylinder... special adapters are not needed!

                                                                                                                       Removable sleeve
                                                                                     Cord No.        Model No.                                        Mass             Remarks
                                                                                                                        size (inside dia)
                                                                                                                                                                      With slide
                                                                                     AA-2713            1205            ø76.2 ~ 165 mm               9.07 kg
                                                                                                                                                                      hammer




                                                                                                                                                 _______________
      HYDRAULIC & MANUALLY OPERATED SLEEVE PULLER/INSTALLER SET
                                                                                   For tractors, trucks, buses, and other power units. Handles both
                  17-1/2 ton
                  Hydraulic ram                                                    wet and dry sleeves without removing head studs!
                                                                                   Saves time, money and labor in re-sleeving engines... time re-
                                                                                   quired is cut up to 75%, effort up to 50%. Choice of two sets:
                                                                                   manually-operated, screw-powered and 17-1/2 ton hydraulically-
                                                                                   powered. A wide range of adapter plates is available to fit most
                                                                                   engine models. Select the set which best meets your needs and
                                                                                   the proper adapter plates to fit your equipment. Conversion sets
                                                                                   and accessories are available.




                                                                   AA-2714




                            AA-2715




                                                                                                                                 AA-2716


       Code No.        Model No.                                        Content                                                      Mass                       Remarks
                                         24824   Thrust washer               10088        Cap screws, hex hd. (3)
                                         37592   Three-way head              10586        Flat washers (3)
                         1200
        AA-2714                          27908   13" risers (3 req’d)        11446        Thrust bearing                           9.52 kg                  Removing only
                      (manual type)
                                         22205   Forcing nut                 32976        Pulling screw
                                        208675   Swivel assembly
        AA-2715                         33769    Screw extension             302340       Yoke assembly                                                  Installing conversion
                          1201                                                                                                      8.4 kg
                                        41291    Installing bar                                                                                               kit for 1200
                                         37592   Three-way head              208675       Swivel assembly
                                         27908   13" risers (3 req’d)        10088        Cap screws, hex hd. (3)
                                         33769   Screw extension             10586        Flat washers (3)
                          1202
        AA-2716                          41291   Installing bar              32976        Pulling screw                           37.19 kg                    Removing &
                     (Hydraulic type)
                                        302482   Speed nut                   21714        Insert                                                               installing
                                         10221   Hex safety nut               4180        Hydraulic ram and pump
                                        302340   Yoke assembly                            assembly
      Note: Adapter plates are not included. Refer to next page.


                                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                   Telephone:                                                                       Fax:
  Suite 6, St Georges House, Brighton,                              +44 (0)1273 686870                                                               +44 (0)2075 043787
  East Sussex,BN2 1ED,                                              +44 (0) 7745790024                                                               +44 (0)1273 675740
  United Kingdom.                                                   E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
                         Engine Service Equipment & Tools                                                                                                                                  A41
                                                                                                                       _________________________
    SLEEVE REMOVER PLATE FOR AA-2714 AND AA-2716 SETS
    Determine engine bore size (“A” dimension) and O.D. of sleeve to be pulled                                                                                    Bore         Model




                                                                                                                                                                                                 ENGINE SERVICE
                                                                                                                                                                  Dia.         No.
    (“B” dimension). Select the plate which has proper dimensions by consult-
                                                                                                             ALLIS-CHALMERS
    ing the chart below.                                                                                     2.000 Series - 2.000, 2.300, 2.350    3-7/8"                        1224
                                                                                                             2.800, 2.900, 2.950
                                                                                                             12 Liter, 15.000, 16.000, 19.000
                                                                                                             21.000, 25 000                        5-1/4"                        1247
                                                                                                             J.I. CASE
                                                                                                             207 Diesel                                4"                        1227
                                                                                                             267 & 401 Diesel                     4-1/8"                         1229




                                                                                                                                                                                                 A
                                                                                                             336 & 504 Diesel                     4-5/8"                         1238
      Code   Model    Bore          “A”      “B”      Code   Model    Bore          “A”      “B”
                                                                                                             CATERPILLER
       No.    No.                  (I.D.)  (O.D.)      No.    No.                  (I.D.)  (O.D.)            1673C, 1674, 3304, 3306, D330C        4-3/4"                        1240
                     inches       +0.010 +0.015                      inches       +0.010 +0.015              D333C, D334
                      (mm)        –0.000 –0.015                       (mm)        –0.000 –0 015              D326, D337                           5-1/8"                         1246
                                 (inches) (inches)                               (inches) (inches)
                                                                                                             CUMMINS
                     3-1/2"                                          4-5/16"
     AA-2718 1217    (88.900)     3.484    3.640     AA-2733 1233    (109.538)    4 308      4.455           J                                    4-1/8"                         1229
                     3.6"                                            4-5/8"                                  H & NH                               4-7/8"                         1242
     AA-2719 1219    (91.440)     3.585    3.657     AA-2738 1238    (117.475)    4.608      4.729
                                                                                                             V Series 903 NT855                   5-1/2"                         1250
                     3-9/16"                                         4-3/4"                                  GENERAL MOTORS
     AA-2721 1221    (90.488)     3.547    3.663     AA-2739 1240    (120.650)    4.734      5.171
                                                                                                             53 Series                            3-7/8"                         1225
                     3-11/16"                                        4-7/8"
     AA-2722 1222    (93.663)     3.671    3.792     AA-2741 1243    (123.825)    4 860      5.044           71 Series                            4-1/4"                         1232
                     3-7/8"                                          4-7/8"                                  INTERNATIONAL HARVESTER
     AA-2723 1223    (98.425)     3.864    4.052     AA-2742 1242    (123.825)    4 860      4.980
                                                                                                             C-164                                3-1/2"                         1217
                     3-7/8"                                          5-1/8"
     AA-2724 1224    (98.425)     3.843    4.187     AA-2745 1246    (130.175)    5 093      5.593           C-221, C-263                        3-9/16"                         1221
                     3-7/8"                                          5-1/4"                                  D-166, D-188, D-236, D-282         3-11/16"                         1222
     AA-2725 1225    (98.425)     3.859    4.093     AA-2746 1247    (133.350)    5 218      5.718
                                                                                                             C-248, D-236, D-310, D-358, D-155
                     4.0"                                            5-1/2"                                  D-179, D-206, D-239                   3-7/8"                        1225
     AA-2727 1227    (101 600)    3.984    4.218     AA-2749 1250    (139.700)    5.484      5.718
                                                                                                             C-281, D-281, D-361                   4-1/8"                        1230
                     4-1/8"                                          4-1/2"
     AA-2728 1229    (104.775)    4.093    4.531     AA-2751 1239    (114.3)      4.485      4.560           D-691, D-461                         4-3/4"                         1240
                     4-1/8"                                                                                  D-407                               4-5/16"                         1233
     AA-2729 1230    (104.775)    4.109    4.229
                                                      Sleeve Puller Plate                                    JOHN DEERE
                     4-1/4"                                                                                  3-152, 4-202, 6-303 3.86 1224
     AA-2731 1236                 4.235    4.440
                     (107 960)                        Application Chart
                                                                                                             4-270, 6-404                          4-1/4"                        1232
                     4-1/4"
     AA-2732 1232    (107 960)    4.235    4.470      The puller plates listed here are for                  6-531                                4-3/4"                         1240
     AA-2764 1216
                     3-3/8"
                                  3.359    3.546
                                                      use with a 17 - 1/2 ton sleeve puller.                 8-955                                5-512"                         1250
                     (85.725)
                                                      It is advisable to check the sleeve’s                  MACK
                     3-7/16"
     AA-2765 1218    (87.31)      3.421    3.531                                                             END(T) 673, 675, 676                  4-7/8"                        1243
                                                      I.D. and refer to the plate dimension
                     4.40"                                                                                   PERKINS
     AA-2766 1228    (111.76)     4.390    4.609      sizes.                                                 AD3.152 & AG3.152, AD4.203              3.6"                        1219
                                                      If your engines is not shown in this                   AG4.212, A4.236, AG4.236              3-7/8"                        1223
                                                      application chart, please refer to                     A4.300, A4.318                       3-7/8"                         1239
                                                                                                             A6.354, A6.3541, ATC6.354, AT6.3541 3-7/8"                          1223
                                                      blank sleeve plates.


                                                                                                                                                 _______________
    DRY TYPE SLEEVE INSTALLER PLATE FOR AA-2714 AND AA-2716 SETS
    Each dry installing plate covers a wide range of bore sizes                                      Model            Fits sleeves                “A”      “B”       “C”
                                                                                    Code No.
    and reversible designs make both sides usable. Installer plates                                   No.              inch (mm)              inch (mm) inch (mm) inch (mm)
    are designed for use with manual and 17-1/2 ton hydraulic                                                    3-9/16" ~ 3-7/8"               4-1/4"        3.546"        3.859"
                                                                                    AA-2752          1253
                                                                                                                 (90.488 ~ 98.425)             (107.95)       (90.07)       (98.02)
    puller-installers. To insure correct sleeve installation check
                                                                                                                 4-1/8" ~ 4-3/8"                4-3/4"        4.109"        4.359"
    the chart.                                                                      AA-2753          1254
                                                                                                                 (104.775 ~ 111.125)           (120.65)      (104.37)      (110.72)
                                                                                                                 4-3/8" ~ 4-3/4"                5-1/4"        4.390"        4.734"
                                                                                    AA-2754          1255
                                                                                                                 (111.125 ~ 120.650)           (133.35)      (111.51)      (120.24)
                                                                                                                 4-13/16" ~ 5-3/4"              6-3/8"        4.797"        5.734"
                                                                                    AA-2755          1256
                                                                                                                 (122.238 ~ 146.050)           (161.93)      (121.84)      (145.64)

                                                                     ______________________________________________
    BLANK SLEEVE REMOVER PLATES
                                                                                                                                 Machined                    Will Machine to
                                                                                                           Model
                                                                                      Code No.                                  Bore Dim. “A”               Bore size Dim. “A”
                                                                                                          Number
                                                                                                                                 inch (mm)                     inch (mm)
                                                                                      AA-2756              38719               9 375    (238.13)              8.500     (215.90)
                                                                                      AA-2757              38721               70       (177.80)              5.750     (146.05)
    Sleeve puller blanks are a supplement to the sleeve puller                        AA-2758              38720               5.750    (146.05)              5.250     (133.35)
                                                                                      AA-2759              39058               5 250    (133.35)              4.750     (120.65)
    plates. Should a standard plate not be available, these blanks
                                                                                      AA-2760              39057               4.750    (120.65)              4.400     (111.76)
    can be machined by the customer to the bore size required.                        AA-2761              38722               4.400    (111.76)              3.812     (96 82)
    Instructions are included.                                                        AA-2762              38724               3 812    (96.82)               3.437     (87 30)
                                                                                      AA-2763              38723               3.437    (87.30)               3.0       (76 20)

                                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd                Telephone:                                                                          Fax:
Suite 6, St Georges House, Brighton,                           +44 (0)1273 686870                                                                  +44 (0)2075 043787
East Sussex,BN2 1ED,                                           +44 (0) 7745790024                                                                  +44 (0)1273 675740
United Kingdom.                                                E-Mail: sales@hemsltd.com                                                           www.hemsltd.com
A42
                       Engine Service Equipment & Tools
                                                                                  ___________________________________
      CYLINDER BORING MACHINE (PORTABLE TYPE)
                                                                                  Code No.                                                            AA-3015

                                            Min. boring dia.                                                                        mm                  66
                                            Max. boring dia.                                                                        mm                 150
                                            Max. boring depth                                                                       mm                 400
                                            Rotation speeds                                                                min-1(r.p.m.)        68, 136, 167, 334
                                            Spindle feed speeds                                                                mm/rev.            0.14 and 0.06
                                            Reduced feed (only for the two highest rotation speeds)                            mm/rev.                 0.06
                                            Three-phase motor (50Hz)                                                                 kW             0.55/0.37
                                            Approx. mass of machine, unpacked                                                         kg               100
                                            Approx. mass of machine, ocean packed                                                     kg               130
                                            Shipping dimensions                                                                       m         1.27 x 0.46 x 0.43

                                           Various voltage are available upon request.




                                                                                                              ________________________
      CYLINDER BORING & MILLING MACHINE (STATIONARY TYPE)
                                                                       These machines feature a well-dimensioned base and a boring
                                                                       head that ensures the correct position of the center line of the
                                                                       bore, and thus they are ideal for resizing cylinders. By using at-
                                                                       tachments, M type machines can also be used as milling ma-
                                                                       chines.

                                                                                         Code No.                                    AA-3011/AA-3011M
                                                                        Boring range                                      ø32 ~ 350 mm
                                                                        Max. boring head travel                              780 mm
                                                                        Distance spindle center to column                    410 mm
                                                                        Max. distance spindle head to table                 1,460mm
                                                                        9 spindle speeds (same for all types) 50-70-95-125-175-240-340-465-600 rpm
                                                                        8 spindle feeds (same for all types)  0.03, 0.05, 0.08, 0.1, 0.15, 0.2, 0.34,
                                                                                                                     0.45, mm per revolution
                                                                        Quick return of boring slide                   840 mm per minute
                                                                        Table surface                                    1,525 x 450 mm
                                                                        Table traverse lengthwise                           1,350mm
                                                                        Table movement crosswise                             140 mm
                                                                        Max. milling length (M)                             1,050 mm
                                                                        Table speed stepless (M)                        0 ~ 1,800 mm/min
                                                                        Milling width (M)                                   ø300 mm
                                                                        Spindle motor                                         1.5 kW
                                                                        Work space required                             1,625 x 3,445 mm
                                                                        Work height required                                3,010 mm
                                                                        Height of column                                    2,715 mm
                                                                        Net mass                                       3,230 kg / 3,290 kg
                                                                        Gross mass                                     3,740 kg / 3,800 kg
                                                                        Shipping volume                                       9.2 m3




                                                               Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd      Telephone:                                                                        Fax:
  Suite 6, St Georges House, Brighton,                 +44 (0)1273 686870                                                                +44 (0)2075 043787
  East Sussex,BN2 1ED,                                 +44 (0) 7745790024                                                                +44 (0)1273 675740
  United Kingdom.                                      E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
                        Engine Service Equipment & Tools                                                                                                                                 A43
                                                                                                                ___________________________
    CYLINDER BORING (AND SURFACE-GRINDING) MACHINE




                                                                                                                                                                                               ENGINE SERVICE
                                                                                                                                                                                               A
                                 AA-3044                                                                                    AA-3046S


    Stype model can also be used as surface milling machines.

                            Code No.                            AA-3043/AA-3043S           AA-3044/AA-3044S               AA-3045/AA-3045S                     AA-3046S

     Boring diameters with standard spindles             mm           31 ~ 150              31 ~ 180               31 ~ 320              31 ~ 320
     Max. boring depth                                   mm              380                   460                    700                   800
     Max. vertical head travel                           mm              580                   830                    930                  1,230
     Distance table to head                              mm         1,090 ~ 510           1,260 ~ 430            1,530 ~ 600           1,830 ~ 600
     Max. distance spindle center to column guides       mm              280                   340                    370                   410
     Useful dimensions of table                          mm          900 x 379            1,200 x 400            1,550 x 500           1,800 x 600
     Table traverse                                      mm              880                   980                   1,530                 1,780
     Table cross traverse                                mm               65                    80                    130                   130
     Surface milling width (S type)                      mm              250                   320                    380                   420
     Spindle speeds                             min-1(r.p.m.)        240 ~ 480               0 ~ 500          80, 160, 230, 460     80, 160, 230, 460
     Automatic head feeds                           mm/rev.              0.13              0.09 ~ 0.18         0.06, 0.09, 0.18      0.06, 0.09, 0.18
     Automatic table feeds (S type)                mm/min              40 ~ 80               40 ~ 80                40 ~ 80               40 ~ 80
     Main spindle rotation motor                    kW(HP)             0.75(1)              1.88(2.5)              1.65(2.2)             1.65(2.2)
     Head fast feed motor                           kW(HP)           0.56(0.75)            0.56(0.75)             0.56(0.75)            0.56(0.75)
     Table fast automatic feed motor (S type)       kW(HP)            0.23(0.3)             0.23(0.3)              0.23(0.3)             0.23(0 3)
     Tool grinding motor                            kW(HP)            0.38(0.5)             0.38(0.5)              0.38(0.5)             0.38(0.5)
     Dimensions (L x W x H)                              mm     1,700 x 1,080 x 2,000 1,800 x 1,200 x 2,170 215 x 1,350 x 2,400 3,200 x 1,550 x 2,700
     Required workspace                                  mm     2,580 x 1,145 x 2,230 2,780 x 1,250 x 2,570 3,680 x 1,480 x 2,700 4,980 x 1,680 x 3,000
     Net mass                                 approx.     kg            1,350                 1,600                  2,400                 3,200

    Standard accessories
    Centering system
    Surface milling attachment incl. 1 spindle, 1 tool-holder plate and cutting tools (S type only)
    2 setting up support mm. 100 high with bolts. (all types)
    2 setting up support mm. 300 high with bolts. (AA-3045/AA-3045S/AA-3046S), 200 high with bolts (AA-3043/AA-3043S), 220
    high with bolts (AA-3044/AA-3044S)
    4 locking clamps with bolts.
    Head feed control system.
    Micrometer spindle infeed control system.
    Set of spanners.
    Operating manual with spare parts list.




                                                                         Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd                 Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                            +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                            +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                                 E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A44
                        Engine Service Equipment & Tools
                                              _________________________________________________________
      LINE BORING MACHINE




                                                                                                                                  AA-3053~55




                                                     Code No.                                AA-3053                          AA-3054                           AA-3055
                                     Max. length of block                   mm                 1,800                             2,200                            2,500
                                     Distance from parallels to boring
                                                                                                                              400 ~ 800
                                     bar(min-max)                           mm
                                     Boring capacity                       ømm                                        22 ~ 200
                                     Spindle speed                 min-1(r.p.m.)                              95-150-220-320-360-540
                                     Feed manual rapid                 mm/rev.                                           100
                                     Feed, roughing                    mm/rev.                                            0.1
                                     Feed, finishing                   mm/rev.                                        0.05 - 0.1
                                     Max. travel of boring bar              mm                                           430
                                     Motor                             kW(HP)                                         1.08(1 5)
                                     Dimension (L x W x H)                  mm       3,300 x 670 x 1,400         3,700 x 670 x 1,400     4,000 x 670 x 1,400
                                     Mass                                    kg              1,500                      1,600                   1,700
                                     Shipping volume                         m3               4.66                       5.19                    5.59
                                     Gross mass                              kg              1,800                      1,900                   2,050
                                     Standard accessories                           3 pairs of setting up supports with 4 locking clamps
                                                                                    1 complete bridge central support
                                                                                    1 dial gauge holder
                                                                                    2 universal centering device
                                                                                    1 bearing adjusting device
                                                                                    1 set of spanners
                                                                                    1 operating manual and spare parts list
                                                                                    1 precision tool setting micrometers
                                                                                    Lighting system
                                   Various voltages are available upon request.

                         __________________________________________________________________
      BORING BAR
      Boring bars in hard chrome-nickel-molybdenum steel, they
      are chromium-plated and treated with our special process to
      assure more precision and straightness for a long time.




      1   Bushes                5      Cutter heads
      2   Bearings              6      Rest for central support
      3   Centering cones       7      Tool setting micrometer holder              Complete equipment (BA160) for boring up to 160mm with 45 mm bar (BA45)
      4   Tool pushers
                            Bars                  Cutter heads (standard)          Complete equipment (on request)                     Cutter heads and acc. (on requ )
       Type         Measure        Capacity       Ref.    ø       Cap              Type         Cutter heads
                     (D x L)                                                                    Ref.    ø         Cap                       Ref.        ø        Cap
       BA 22       ø22 x 1200       24 ~ 50       ––      ––      ––               ––           ––      ––        ––                                    40       45 ~ 65
       BA 26       ø26 x 1300       28 ~ 50       ––      ––      ––               ––           ––      ––        ––                        300A        45       50 ~ 70
       BA 30       ø30 x 1600       32 ~ 60       301A    50      55 ~ 70          ––           ––      ––        ––                        302A        70       75 ~ 100
       BA 37       ø37 x 1800      40 ~ 100       303A    70      75 ~ 100         ––           ––      ––        ––                        304A        85       90 ~ 120
       BA 45/21    ø45 x 2100
                                                  305A    65      70 ~ 100         BA 160       307A      100     105 ~ 130
       BA 45/25    ø45 x 2500      47 ~ 110                                                                                                 309A        140      145 ~ 190
                                                  306A    75      80 ~ 110                      308A      120     125 ~ 160
       BA 45/28    ø45 x 2800
       BA 50/25    ø50 x 2500
                                                  310A    70      75 ~ 100
       BA 50/28    ø50 x 2800      52 ~ 120                                        BA 200       313A      150     155 ~ 200                 312A        120      125 ~ 170
                                                  311A    90      95 ~ 130
       BA 50/32    ø50 x 3200
       BA 60/32    ø60 x 3200                     314A    120     125 ~ 150
                                   120 ~ 200                                       BA 250       316A      200     205 ~ 250
       BA 60/35    ø60 x 3500                     315A    150     155 ~ 200

                                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                Telephone:                                                                         Fax:
  Suite 6, St Georges House, Brighton,                           +44 (0)1273 686870                                                                 +44 (0)2075 043787
  East Sussex,BN2 1ED,                                           +44 (0) 7745790024                                                                 +44 (0)1273 675740
  United Kingdom.                                                E-Mail: sales@hemsltd.com                                                          www.hemsltd.com
                         Engine Service Equipment & Tools                                                                                                                               A45
                           __________________________________________________________________
    MICRO HONE
                                                                                This is the special brush suitable to use for honing of cylindrical




                                                                                                                                                                                              ENGINE SERVICE
                                                                                parts in every size, including the automobile engine cylinder, brake
                                                                                cylinders, chain saw engine cylinders, motorcycle engine cylin-
                                                                                ders, bulldozer hydraulic cylinders, hydraulic jack cylinder and
                                                                                other various kinds of hydraulic cylinders. The brush, utterly dif-
                                                                                ferent from conventional wire brushes, is made of “Crystoron”
                                                                                coated with silicon carbide and good for honing of iron, titanium
                                                                                and chrome stainless product. Elastic silicon carbide balls as-




                                                                                                                                                                                              A
                                                                                sure highly precise honing work without possibility of damage to
                                                                                product.

    1) Standard duty                                                            2) Heavy duty
       Small engine                                                                Cylinder block, cylinder liner, oil cylinder
        a. Grits No.180, No.240               b. Grits No.120, No.180               a. Grits No.120, No.180             b. Grits No.120, No.180
              Code No.        ID. (mm)           Code No.        ID. (mm)                     Code No.             ID. (mm)                     Code No.             ID. (mm)

              AA-3101             9.5            AA-3112             89.0                     AA-3129                  89                       AA-3139                  216
              AA-3102            12.7            AA-3113             95.0                     AA-3130                 101                       AA-3140                  228
              AA-3103            15.9            AA-3114            105.0                     AA-3131                 114                       AA-3141                  241
              AA-3104            19.0            AA-3115            118.0                     AA-3132                 127                       AA-3142                  254
              AA-3105            25.4                                                         AA-3133                 140                       AA-3143                  267
              AA-3106            38.0                                                         AA-3134                 152                       AA-3144                  280
              AA-3107            45.0                                                         AA-3135                 165                       AA-3145                  292
              AA-3108            51.0                                                         AA-3136                 178                       AA-3146                  305
              AA-3109            64.0                                                         AA-3137                 190                       AA-3147                  344
              AA-3110            70.0                                                         AA-3138                 203                       AA-3148                  355
              AA-3111            76.0




                                                     ____________________________________________________
    CYLINDER HONING MACHINE
                                                                 Code No.                                AA-3235                     AA-3236                    AA-3237

                                                Honing diameters                       ømm        31~170                31~300                 31~300
                                                Max. honing leng h                       mm          380                   450                   800
                                                Max. spindle stroke                      mm          300                   370                   250
                                                Max. head stroke                         mm          470                   520                    60
                                                Spindle rotation speeds           min-1(rpm)     70 ~ 140               40 ~ 150          50, 75, 100, 150
                                                Distance spindle center to column guide mm           350                   350                   430
                                                Max. distance table to honer             mm          800                   800                   900
                                                Table surface (L x W)                    mm     1,400 x 500           1,400 x 500           1,350 x 550
                                                Table traverse                           mm         1,340                 1,340                 1,300
                                                Table cross traverse                     mm           ––                    80                    80
                                                Main spindle rota ion motor          kW(Hp) 1.6-1.1(2.2 - 1.5)            2.2(3)              2.57(3 5)
                                                Spindle speed stroke                  m/min           18                 6 + 18                   18
                                                Head hoisting motor                  kW(Hp)           ––                    ––                 0.74(1)
                                                Hydraulic pump                       kW(Hp)        1.47(2)               1.47(2)                2.2(3)
                                                Cooling pump                         kW(Hp)      0.09(0.12)            0.09(0.12)            0.18(0.25)
                                                Dimensions : (L x W x H)                 mm 2,380 x 1,370 x 2,300 2,380 x 1,370 x 2,450 2,200 x 1,500 x 2,700
    Standard Accessories                        Required workspace                       mm 3,720 x 1,370 x 2,800 3,720 x 1,370 x 3,000 3,500 x 2,000 x 2,800
    1 pair of supports with locking clamps.     Net mass                        approx. kg          1,200                 1,500                 2,000
    Splash-guards Set of spanners,
    Operating manual




                                                Honing tools                L/31      L/40       L/50       L/60      L/70       L/80      L/100      L/120     *L/15     *L/200

                                                Honing diameters ømm 31~51            40~55     51~74      59~85 70~104 83~110 102~154 120~180 150~210 200~265

                                                Stone-holders with
                                                                             12         16        20         20         24        18         30         30         30        30
                                                abrasive stones       n˚

                                                *Only for AA-3237
    Honing tools, mechanic expansion, with
    infinitesimal control.

                                                                        Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd                Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                           +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                           +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                                E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A46
                       Engine Service Equipment & Tools
                                 ____________________________________________________________
      PISTON RING TOOL
                                                                   This piston ring tool is exclusively used for removal and installa-
                                                                   tion of piston ring.

                                                                       Code No.                 Capacity                  Overall length                 Mass

                                                                        AA-3705               83 ~ 135 mm                    230 mm                     250 gr
                                                                        AA-3706               51 ~ 85 mm                     150 mm                     110 gr
                                                                        AA-3707               70 ~ 105 mm
                                           AA-3706                      AA-3708              100 ~ 175 mm




                        AA-3707, 3708




                                             ____________________________________________________
      PISTON RING COMPRESSOR
                                                                             Code No.                       Capacity ømm                          Mass kg

                                                                              AA-4001                           50 ~ 125                             0.25
                                                                              AA-4002                           75 ~ 175                              0.3




                                                       _____________________________________________
      PISTON HEATER (BEARING HEATER)
                                                                           Code No.                   AA-4101                 AA-4102                AA-4103
                                                                    Power input                        AC 1ph                  AC 3ph                 AC 1ph
                                                                                                      500W x 2                  3 kW                   3 kW
                                                                    Regulated
                                                                    temperature               ––                             50 ~ 300˚C              0 ~ 300˚C
                                                                    Cord length       m        3                                   3                       3
                                                                    Inside dimension
                                                                    (B x D x H)     mm 250 x 335 x 190                   320 x 500 x 240 440 x 440 x 390
                                                                    Overall dimension
                                                                    (L x W x H)     mm 290 x 440 x 275                   470 x 560 x 350 500 x 635 x 820
                                                                    Mass              kg      14                                 30                     60
                                                                    Remarks              Oil ba h type                      Oil ba h type             Dry type
                                                                  Various voltages are available request.




          AA-4101                        AA-4103
          AA-4102




                                                           Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                        Fax:
  Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                                +44 (0)2075 043787
  East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                                +44 (0)1273 675740
  United Kingdom.                                    E-Mail: sales@hemsltd.com                                                         www.hemsltd.com
                        Engine Service Equipment & Tools                                                                                                                               A47
                                        ____________________________________________________________
    SURFACE GRINDER




                                                                                                                                                                                             ENGINE SERVICE
                                                                                                                                                                                             A
                                                                                                                      AA-2811/2812
                        AA-2804S/2809S


                           Code No.                                AA-2804S                    AA-2809S                        AA-2811                        AA-2812

     Grinding length x width (max.)                     mm         840 x 310                  1,120 x 350          1,600 x 470         2,100 x 470
     Table surface                                      mm        1,000 x 250                 1,300 x 300          1,400 x 400         1,900 x 400
     Max. long table travel                             mm           1,000                       1,300                1,800               2,300
     Automatic table feed per minute                    mm        200 ~ 4,000                 200 ~ 4,000           0 ~ 2,000           0 ~ 2,000
     Distance center of spindle to column guides        mm                                                             480                 480
     Min. height table to grinding wheel                mm             150                     150                     330                 330
     Max. height table to grinding wheel                mm             550                     700                    1,200               1,200
     Vertical automatic wheel head feed                 mm              ––                     800                     870                 870
     Grinding wheel dia.                                mm             360                     360                     450                 450
     Diameter of tool-holder plate                      mm                                                             315                 315
     Speed of rota ion of grinding wheel         min-1(rpm)         1,400/700               1,400/700                  900                 900
     Main spindle rotation motor 50Hz              kW(HP)        3.68+0.37+0 07      3 68+0.55+0.25+0.37+0.07 9.19+0.55+1.10+0.26 9.19+0.55+1.10+0.26
                                                                   (5+0.5+0.1)      (5+0.75+0.34+0.5+0.1) (12.5+0.75+1.5+0.35) (12.5+0.75+1.5+0.35)
     Dimensions (L x W x H)                            mm     2,650 x 1,030 x 1,560 3,250 x 1,030 x 1,770 3,450 x 1,750 x 2,470 4,450 x 1,750 x 2,470
     Workspace required lengthxwidth                   mm         3,650 x 1,030           4,550 x 1,030           5,300 x 1,750       6,300 x 1,750
     Machine height wi h max. clevated head            mm             1,960                   2,470                   2,730               2,730
     Weight approx.                                     kg            1,000                   1,250                   3,000               3,500

                                                                                       ____________________________________
    TURNING DEVICE FOR SLEEVE COUNTERBORE
     After surface grinding of an engine block, the counterbores of the liners have to be re-adapted. Also in case of a leaking liner, the
     counterbore must be turned, preferably without removing the engine from the chassis. This turning device does both, in an
     amazingly simple, rapid and perfect manner. It even allows to turn sealing faces and sealing grooves on cylinder heads and
     cylinder blocks.
     Main features:
     Immediate locking of the device by electromagnet. Power supply 110 volt (resp.220 volt) single phase. Surprisingly simple and
     quickly centered. Fast setting of the turning tool. Micrometer is graduated for vertical feed. Cross feed 0.13 mm per revolution.
     To use on both, built in or removed engines. Important time savings. Lightweight 5 kg and simple to use. Also perfectly suitable
     for sealing faces and sealing grooves.

                                                                                    Code No.                                          AA-2901
                                                                                                      for ø 73 ~ 88 mm
                                                                                                      for ø 85 ~ 105 mm
                                                                                                      for ø 97 ~ 126 mm
                                                                                                      for ø 122 ~ 162 mm
                                                                                                      for ø 130 ~ 170 mm
                                                                                 Tools (option)
                                                                                                      for ø 158 ~ 198 mm*
                                                                                                      for ø 194 ~ 225 mm*
                                                                                                      for sealing faces on cyl. heads (Deuts trucks)
                                                                                                      for sealing faces on cyl. heads (Deuts small trucks, DAF)
                                                                                                      for sealing faces on cyl. heads (VW, Porsche)
                                                                                                      for sealing grooves on cyl. heads and blocks

                                                                               * Can be used only in combination with a reduction steel plate.




                                                                       Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd               Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                          +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                          +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                               E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A48
                          Engine Service Equipment & Tools
                                                                ____________________________________________
      CONNECTING-ROD BORING MACHINE
                                                                                               Code No.                               AA-4253                 AA-4254
                                                                            Min. & max. boring capacity with
                                                                              standard equipment                ømm      15~90             18~160
                                                                            Min. & max. boring capacity with
                                                                              extra equipment                   ømm     15~130                ––
                                                                            Max. boring length                   mm       120                120
                                                                            Min. length of con-rod               mm        90                180
                                                                            Max. length of con-rod               mm       550                930
                                                                            Max. clamping width                  mm       250                400
                                                                            Max. traverse of saddle              mm       280                380
                                                                            Max. traverse of vertical slide      mm       350                600
                                                                            Spindle speeds              min-1(r.p.m.)   250~500           250~500
                                                                            Automatic feed                  mm/rev.       0.06              0.06
                                                                            Hand feed                       mm/rev.         4                  4
                                                                            Height: guides to spindle center mm           135                175
                                                                            Electric 2-speed motor          kW(HP) 0.44~0.29(0 6~0.4) 0 55~0.74(0.75~1)
                                                                            Dimensions (L x W x H)               mm 1,680x1,120x500 2,000x1,200x560
                                                                            Net mass                     approx. kg       200                400




      Standard Equipment                                                      Accessories supplied as standard equipment with AA-4254 only:
      1 vertical fixture for setting up.                                      1 tool setting micrometer form mm. 80 to 160 with holder
      1 universal boring spindle                                              1 boring head 90 mm.
      1 set of cutting tools (12 pcs.) for boring, facing and chamfering      1 expanding arbor 122 mm.
      1 centering device with dial indicator                                  1 set (3 pcs.) of cutting tools
      2 supports for measuring with dial indicator
      1 tool setting micrometer from 13 to 90 mm with holder                  Extra equipment of request for AA-4253 for boring up to 130 mm
      1 set of expanding arbors incl. 8 pcs. 15, 18, 22, 32, 40, 48,          1 tool setting micrometer from 67 to 130 mm with holder
        54, 80 mm with expanding pins.                                        1 boring head 67 mm.
      2 set of clamping supports                                              1 set cutting tools. (4 pcs.)
      1 set of spanners

                                                                ____________________________________________
      CRANKSHAFT REBUILDING MACHINE
                                                                           This machine is specially built to weld main journals and big end
                                                                           journals of crankshaft.

                                                                                               Code No.                               AA-4302                 AA-4303
                                                                            Crankshaft length                            mm             2,438                   4,876
                                                                            Crankshaft mass                               kg             544                    1,818
                                                                            Chuck size                                   mm              178                     254
                                                                            Stroke                                       mm              203                     305
                                                                            Swing                                        mm              559                     609
                                                                            Carriage travel                              mm             1,220                   2,438
                                                                            Electric power output                                 30V DC 300A             30V DC 500A
                                                                                                                                     100% duty               100% duty
                                                                                           input                                      3 ph, AC                3 ph, AC
                                                                            Air requirement                                        0.057 m3/min            0.057m3/min
                                                                                                                                 at 0.7MPa(7 kgf/cm2)    at 0.7MPa(7 kgf/cm2)
                                                                            Shipping size                                 m3        approx. 5.66             approx. 14
                                                                            Mass                                          kg            1,090                   1,510

                                                                           Various voltages are available upon request.

                                                                    Consumable kit of CRANKSHAFT REBUILDING MACHINE
                                                                     Code No.                           Description                                     Contents
                                                                      AA-4311 Universal build up kit (for Gasoline engine)                    Wire           :     30 Lbs.
                                                                               (Modular cast iron & forged steel)                             Flux           :     90 Lbs.
                                                                      AA-4312 High performance kit (for Gasoline engine)                      Wire           :     30 Lbs.
                                                                               (High alloy billets & forgines)                                Flux           :     63 Lbs.
                                                                      AA-4313 Diesel kit                                                      Wire (Journal):      20 Lbs.
                                                                              (Work dia. 3" or less)                                          Wire (Rudius) :      10 Lbs.
                                                                                                                                              Flux           :     63 Lbs.
                                                                      AA-4314 Diesel kit                                                      Wire (Journal):      20 Lbs.
                                                                              (Work dia. 3" or more)                                          Wire (Rudius) :      10 Lbs.
                                                                                                                                              Flux           :     63 Lbs.

                                                                   Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd           Telephone:                                                                       Fax:
  Suite 6, St Georges House, Brighton,                      +44 (0)1273 686870                                                               +44 (0)2075 043787
  East Sussex,BN2 1ED,                                      +44 (0) 7745790024                                                               +44 (0)1273 675740
  United Kingdom.                                           E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                          A49
                                                              ___________________________________________
    CRANKSHAFT STRAIGHTENING PRESS
                                                                       This press is used for straightening crankshaft, spindle... etc.




                                                                                                                                                                                     ENGINE SERVICE
                                                                                         Code No.                                           AA-4502
                                                                        Max. length of workpiece     mm                                     2,743
                                                                        Max. diameter of workpiece   mm                                      304
                                                                        Max. swing of workpiece      mm                                      609
                                                                        Max. ram pressure          kN(kg)                               490(50,000)
                                                                        Type of hydraulic pump                                             Electric
                                                                        Dimensions (L x W x H)       mm                             3,327 x 1,555 x 1,880




                                                                                                                                                                                     A
                                                                                          ________________________________
    DYNAMIC BALANCING MACHINE FOR CRANKSHAFT
    This machine is used for checking the balance of crankshaft.                    Code No.                            AA-4551                       AA-4552
    Automatic and simultaneous digital indication of unbalance          Applied of
                                                                                                          kg             3~300                          3~500
    weight and angular position on two support.                         workpiece mass
                                                                        Max. swing of
                                                                                                        mm                 980                          1,400
                                                                        workpieace
                                                                        Max. length of
                                                                                                        mm                3,100                         3,100
                                                                        workpiece
                                                                        Diameter of
                                                                                                        mm               3~130                         15~140
                                                                        workpiece
                                                                        Rotation speed           min-1(rpm)         450-900-1,400                 350-700-1,400
                                                                        No. of reading screen                                3                             3
                                                                        Head motor                       kw                1.0                            2.2
                                                                        Dimensions (L x W x H) mm 4,200 x 1,000 x 1,500 4,200 x 1,000 x 1,500
                                                                        Mass                              kg              1,400                         1,450




                                                                                          ________________________________
    MAGNETIC CRACK DETECTORS FOR CRANKSHAFT
    This detector is used for checking of crack of crankshaft.                      Code No.                            AK-0431                       AK-0432
    This detector is an apparatus intended for the detection of
                                                                        Max. length of
    surface and/or subsurface cracks on ferrous material suck as                                       mm                 1,250                          1,850
                                                                        workpiece
    iron, cast iron, steel by magnetic and electric testing proce-      Coil ring
                                                                                                       mm                  350                            350
    dures in which magnetic fluorescent black light detectors are       diameter (Max.)

    used.                                                               Power input                                        AC Single-ph.220V, 5.5kW
                                                                        Dimensions                     mm        1,520 x 620 x 1,070            2,120 x 620 x 1,070
                                                                        Mass                             kg                230                            270
                                                                       Options;
                                                                       1. Darkening curtain & framework :AK-0431-01/AK-0432-01
                                                                       2. Pair of additional cables with  :AK-0431-02/AK-0432-02
                                                                          copper point (Cylinder head & other parts)
                                                                       3. Electric pump for detecting     :AK-0431-03/AK-0432-03
                                                                          medium sprinkling




                                                               Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd       Telephone:                                                                       Fax:
Suite 6, St Georges House, Brighton,                  +44 (0)1273 686870                                                               +44 (0)2075 043787
East Sussex,BN2 1ED,                                  +44 (0) 7745790024                                                               +44 (0)1273 675740
United Kingdom.                                       E-Mail: sales@hemsltd.com                                                        www.hemsltd.com
A50
                                       Engine Service Equipment & Tools
                                                                       ________________________________________________________
      CRANKSHAFT GRINDER




                AA-4405AM AA-4406AU AA-4407AU AA-4408AU




                                                                      AA-4421/        AA-4422/                                                    AA-4407AU/           AA-4408AU/            AA-4428M/
                           Code No.                                                                      AA-4423              AA-4425L
                                                                     AA-4405AM       AA-4406AU                                                    AA-4426RM            AA-4427RM            AA-4428RM
       Distance between centers                 mm                    1,320/1,230   1,550/1,600            1,800                2,300             2,190/2,300   2,750/2,800     3,200
       Distance between chucks                  mm                    1,300/1,200   1,540/1,625            1,750                2,220             2,250/2,200   2,750/2,700     3,100
       Height of centers over table             mm                      220/200       250/345               300                  300                345/350       345/350      400/350
       Swing over table                         mm                      440/460       500/690               600                  600                690/700       690/700      800/700
       Max. offset of centers                   mm                       80/80        100/140               125                  130                140/150       140/150      200/150
       Max. grinding diameter                 ømm                       180/155       180/200               180                  180                200/200       200/200      230/200
       Hand micrometric worktable traverse mm/rev.                        11/5          11/5                 8                    8                   5/8           5/8           8
       Fast hydraulic work table traverse m/mm                             3/-         3/0~5                 3                    3                  0~5/3         0~5/3          3
       Grinding wheel speeds             min-1(rpm)                1,000~1,150/940 900~1,000/760         850~940              850~940            760/770~900   760/770~900 680~800/770~900
       Max. grinding wheel diameter           ømm                       610/660       710/813               760                  760                813/815       813/815      915/815
       Min. max. wid h of grinding wheel mm                          19~40/19~50       19~50              19~50                19~50             19~50/19~60  19~63.5/19~60  25~70/19~60
       Chuck holding diameter                 ømm                       200/155       220/190               250                  250                190/290       190/290      310/290
       Rest capacity                          ømm                  30~100/20~100 30~100/25~180            30~120               30~120           25~180/30~160 25~180/30~160 30~200/30~160
       Workhead spindle speeds min-1(rpm)                           35~70/20~100 20~30~40-60/15~90         0~60                 0~60              15~90/0~60   15~90/0~60       0~60
       POWER
         Wheel-head motor                  kW(HP)             2.94/2.94(4/4)        4.04(5.5)          5.51(7.5)                5.51(7.5)     4 04/7 35(5 5/10) 5 51/7 35(7.5/10) 9.19/7.35(12 5/10)
         Workhead spindle motor            kW(HP)              0.37/–(0.5/–)     0 55/–(0.75/–)         0.74(1)                  0.74(1)         –/0.74(–/1)         –/0.74(–/1)       1.47/0.74(2/1)
         Hydraulic power motor             kW(HP)           0 37/1 62(0.5/2 2) 0.55/1.62(0.75/2.2)    0.92(1 25)               0.92(1 25)    1.62/0.92(2.2/1.25) 1.62/0.92(2 2/1 25) 1.10/0.92(1 5/1 25)
         Cooling pump                      kW(HP)               0.09(0.12)          0.09(0.12)        0.09(0.12)               0.18(0 25)    0.09/0.18(0.12/0.25)     0 09(0.12)     0.18/0.09(0.25/0.12)
       Dimensions (LxWxH)                       mm          3,300x1,350x1,550/ 3,900x1,500x1,700/ 4,500x1,650x1,700        5,000x1,750x1,750 4,795x2,028x1,550/ 6,024x2,028x1,550/ 6,500x2,100x2,000/
                                                            3,080x1,750x1,505 3,700x2,028x1,550                                               5,000x1,750x1,800 5,500x1,850x1,800 6,000x1,850x1,800
       Required workspace                               mm    4,600x1,500/       5,500x1,650/       6,300x1,800              7,300x1,900       7,045x2,030/        8,850x2,030/        9,700x2,200/
                                                              4,340x1,850         5,405x2,030                                                   7,300x1,800         8,300x1,800         9,200x1,800
       Net mass                           approx.        kg   2,800/3,300         3,300/4,800           4,600                    5,000              5,400               6,400           8,400/7,200

       Standard accessories
         3+3 jaws self-centering chucks                                  2               2                  2                     2                    2                    2                     2
         Universal steady rests                                          1               2                  2                     2                    2                    2                     2
         Centers                                                         2               2                  2                     2                    2                    2                     2
         Wheel dresser with diamond                                     1set            1set               1set                  1set                 1set                 1set                  1set
         V44U are for measuring the crank pin centering distance        1set            1set               1set                  1set                 1set                 1set                  1set
         Grinding wheel stripper                                        1set            1set               1set                  1set                 1set                 1set                  1set
         Grinding wheels with pair of wheel flanges                    see list        see list           see list              see list             see list             see list              see list
         Wheel balancing mandrel                                         1               1                  1                     1                    1                    1                     1
         Set of splash guards                                           1set            1set               1set                  1set                 1set                 1set                  1set
         Set of spanners                                                1set            1set               1set                  1set                 1set                 1set                  1set
         Operating manual                                               1set            1set               1set                  1set                 1set                 1set                  1set

      Various voltages are available upon request.
      Optional accessories: To obtain higher efficiency, optional accessories are available.


      TYPE: AM                                                                                            Grinding Wheel
         Basic machine complete for regrinding of crankshafts, with                                        Diameter ømm Hole ømm                         Thickness mm                            for
         manual, 2-speed table traverse and hydraulically oper-                                                   610               127         19, 25, 32, 40                           AA-4421
         ated wheelhead traverse.                                                                                 660               203         19, 22, 25, 28, 32, 38, 45, 50           AA-4405AM
      TYPE: AU                                                                                                    710               203         19, 25, 32, 40, 50                       AA-4422
                                                                                                                  760               203         19, 25, 32, 40, 50                       AA-4423/M
         Same machine as type AM, but with a further developed
                                                                                                                  813               203         19, 22, 25, 28, 32, 38, 45, 50           AA-4406AU
         hydraulic system comprising an infinitely variable table                                                                                                                        AA-4407AU
         traverse-essential for cylindrical grinding-and hydraulically                                                                                                                   AA-4408AU
         operated face locking pins and tailstock center.                                                         815               305         19, 25, 32, 40, 50, 60                   AA-4425/L
                                                                                                                  915               305         25, 32, 40, 50, 60, 70                   AA-4426M/RM
                                                                                                                                                                                         AA-4427M/RM
                                                                                                                                                                                         AA-4428M/RM




                                                                                                  Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd                                        Telephone:                                                                         Fax:
  Suite 6, St Georges House, Brighton,                                                   +44 (0)1273 686870                                                                 +44 (0)2075 043787
  East Sussex,BN2 1ED,                                                                   +44 (0) 7745790024                                                                 +44 (0)1273 675740
  United Kingdom.                                                                        E-Mail: sales@hemsltd.com                                                          www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                    A51
                                         ______________________________________________________
    RADIATOR REPAIR STAND
                                                                 Procedures




                                                                                                                                                                               ENGINE SERVICE
                                                                 Cleaning [hot cleaning]
                                                                 Locating hidden leaks
                                                                 Repairing leaks

                                                                                Code No.                            AA-5408                      AA-5409
                                                                  Service radiator size     mm   1,744 x 1,670        1,727 x 1,219
                                                                  Tank capacity                      1,700                1,000




                                                                                                                                                                               A
                                                                  Heater               kW x qty.    10 x 4                10 x 2
                                                                  Dimensions (L x W x H) mm 2,600 x 2,850 x 1,880 2,520 x 2,330 x 1,625
                                                                  Mass                       kg      1,320                 860




                                                               ________________________________________
    RADIATOR SERVICE TOOLS & MATERIALS
                                                                 (1)   Gas saver                  Code No. AA-5432
                                                                 (2)   Radiator cleaner           Code No. AA-5441
                                                                 (3)   Brazing alloy (Bronze) Code No. AA-5442
                                                                 (4)   Brazing flux               Code No. AA-5443
                                                                 (5)   Other service tools in this catalogue are the followings

                                                                                 Nomenclature                                         Code No.
                                                                  Radiator cap & cooling system tester               AA-5101, 4
                                                                  Battery and coolant tester                         AA-5301
                                                                  Air blow gun                                       OL-0110 ~ 0114
                                                                  Engine cleaning gun                                OL-0201
                                                                  Water hose ree                                     OL-0301 ~ 5
                                                                  Lever spray                                        OL-0501
                             AA-5432                              Power spray gun                                    QN-0801 ~ 3
                                                                  Brush                                              KQ-9001 ~ 8, KQ-9101 ~ 5
                                                                  Clamp                                              RJ-2702 ~ 7, RJ-2751 ~ 61,
                                                                                                                     RJ-2804 ~ 14
                                                                  Adjustable hacksaw frame                           RJ-4201
                                                                  Tinner scissors                                    RJ-4424, 4425, 4426
                                                                  Soldering iron                                     RJ-5601 ~ 7
                                                                  Electric soldering iron                            RJ-5701 ~ 7
                                                                  Compact gas torch                                  RJ-4301




                                                         Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                   E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A52
                       Engine Service Equipment & Tools
                                                                               __________________________________
      INJECTOR (NOZZLE) RECONDITIONING MACHINE
                                                                  This machine is mainly aimed to lap and grind the fuel injection
                                                                  nozzle which gives important influence to the combustion condi-
                                                                  tion in the engine.
                                                                  The reconditioning of fuel injection nozzle can be easily done by
                                                                  anybody, the conditions of fuel supplying and atomization are ex-
                                                                  cellent and thus, the fuel consumption can be decreased.

                                                                                    Code No.                                           AB-0603
                                                                   Motor                                                            1 ph 373W
                                                                   Dimensions (L x W x H)                                       410 x 710 x 380 mm
                                                                   Mass    Approx.                                                     82 kg
                                                                  Various voltages are available upon request.

                                AB-0603




                                                                   _______________________________________
      FUEL INJECTION PUMP SERVICE TOOL KITS
                                                                  For the dismantling and assembly of diesel fuel injection pumps
                                                                  and associated equipment, we offers a range of special Service
                                                                  Tool Kits.
                                                                  Kits are supplied in robust carrying cases which are fitted with
                                                                  trays which locate individual tools.

                                                                       Code No.                                         Description
                                                                    AB-0718-01           99-890             DPA Workbench Kit
                                                                    AB-0718-02           99-895             DPA Test Machine Kit
                                                                    AB-0718-03           99-1000            In Line Tool Kit
                                                                    AB-0718-04           1804-400D          Supplementary Kit DPC
                                                                    AB-0718-05           1804-470D          Micrometric Timing Kit DPC
                              99-705                                AB-0718-06           1804-773E          Micrometric Timing Kit DPA
                                                                    AB-0718-07           7244-600           DPS Tool Kit
                                                                    AB-0718-08           99-315             Bosch ‘VA’ and ‘VE’ Kits
                                                                    AB-0718-09           99-305             Bosch ‘P’ In Line Pump Kit
                                                                    AB-0718-10           99-705             CAV DPA Comprehensive Kit
                                                                    AB-0718-11           7144-158R          DPA Tool Kit
                                                                    AB-0718-12           1804-002B          Roto Diesel DPA Kit
                                                                    AB-0718-13           HM910              Hydraulic Multi-Position Pump Clamp
                                                                  Options;
                                                                  Mount plate of Hydraulic Multi-Position Pump Clamp.
                                                                  Mount plates are available upon request.




                              HM910




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com
                     Engine Service Equipment & Tools                                                                                                                     A53
                                                  _________________________________________________
    CUMMINS PT SYSTEM TOOL KIT
                                                                  Code No. AB-0801




                                                                                                                                                                                ENGINE SERVICE
                                                                  Combined in this one set are essential tools required for servicing
                                                                  both PT pumps and PT injections.
                                                                  The tools are housed in a wooden box, as illustrated, and any
                                                                  item may be purchased separately if preferred.




                                                                                                                                                                                A
                                     _________________________________________________________
    NOZZLE CLEANING KIT
                                                                  Code No. AB-0902
                                                                  This Kit contains all the essential tools required for cleaning fuel
                                                                  injection nozzles, and includes scrapers, holders, brasswire brush
                                                                  and pricker wires.




                                                   ________________________________________________
    PRESSURIZED NOZZLE CLEANER
                                                                  Designed for efficient removal of abrasives, loose carbon and for-
                                                                  eign particles from R, S, T and U size nozzles and similar types.
                                                                  This has a sedimentation trap and filtered recirculating cleaning
                                                                  fluid system with Hand Pump operation.
                                                                  A spray guard window permits visual inspection of spray holes.
                                                                  The quick release nozzle holder eliminates the need for tools and
                                                                  special adapters. An illuminated magnifying glass is available as
                                                                  an optional extra, for close examination of the spray holes.

                                                                                    Code No.                                           AB-0952
                                                                   Dimensions (L x W x H)                                       500 x 500 x 460 mm
                                                                   Mass                                                                12 kg




                                                                                                      _________________________
    COMBINATION WRENCH FOR DIESEL HIGH PRESSURE PIPE
                                                                           Code No.                               Size                           Length
                                                                            AB-1102                               17                            236 mm
                                                                            AB-1103                               19                            240 mm




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


Heavy Equipment Maintenance Solutions(Hems) Ltd    Telephone:                                                                     Fax:
Suite 6, St Georges House, Brighton,               +44 (0)1273 686870                                                             +44 (0)2075 043787
East Sussex,BN2 1ED,                               +44 (0) 7745790024                                                             +44 (0)1273 675740
United Kingdom.                                    E-Mail: sales@hemsltd.com                                                      www.hemsltd.com
A54
                       Engine Service Equipment & Tools
                                          ______________________________________________________
      SPARK PLUG CORD PLIER
                                                                  This is very convenient for removing and installing the plug cord
                                                                  in deep spark plug installation hole.

                                                                            Code No.                            Length                            Mass
                                                                            AC-3113                            300 mm                             230 g




                                                      _____________________________________________
      PLUG WRENCH SET (MAGNET TYPE)
                                                                                    Code No.                                            AC-2801
                                                                   Contents                                           Plug wrench 16, 18, 20.8 mm
                                                                                                                      Ratchet handle
                                                                                                                      Extension bar 75, 250 mm
                                                                                                                      High voltage testing driver
                                                                   Metal case dimensions (L x W x H)                  262 x 122 x 40 mm
                                                                   Mass                                               1.8 kg




                                                          Illustrations and technical data are non-binding and subject to change as a result of technological progress.


  Heavy Equipment Maintenance Solutions(Hems) Ltd   Telephone:                                                                      Fax:
  Suite 6, St Georges House, Brighton,              +44 (0)1273 686870                                                              +44 (0)2075 043787
  East Sussex,BN2 1ED,                              +44 (0) 7745790024                                                              +44 (0)1273 675740
  United Kingdom.                                   E-Mail: sales@hemsltd.com                                                       www.hemsltd.com

								
To top