Docstoc

PLASTIC WELDING SAFETY

Document Sample
PLASTIC WELDING SAFETY Powered By Docstoc
					PLASTIC WELDING SAFETY
? Work area should well ventilated
? Remember the plastic welder- is very hot it can burn you or start a fire.
1. So don't touch the barrel or the tip of the welder with your hand. When welder is
hot.
2. don't have any combustibles laying around your work area
 as they may catch on fire.
? Keep your work area clean.
? When using the plastic welder make sue that the plastic welder rest is set up and
you are able to use it. This will be usefull if you have to move the part that your
working on around.
? Have all your tools that you will be using set up and ready for you when needed.
1. Plastic welder with stand
2. welding rods that you will be using to weld with.
3. wire mesh if needed
4. plastic parts cleaned and ready to weld.
? Now when your finished welding
1. Put the welder on stand and turn it off. Then let the welder cool down.
2. let the plastic item that was just welded cool down.
3. Put all your welding rods back up and if the welder is cool. Put the welder and
stand back up also.

THANKS
KANDJWAREHOUSE.COM

				
DOCUMENT INFO