Bull Bars – excellent protection for your vehicle by aihaozhe2

VIEWS: 5 PAGES: 2

									Your van or SUV is a highly polished, performance machine. Of course, adding a bit
more protection is also important, if you intend to take that van off-road. Bull bar, also
known as light bar, can be an excellent option for your needs. Bull bar is generally
tubular steel constructions that fit on the front of your van, below the grille level.
They run under the van, past the front bumper, & provide additional protection for the
bumper, as well as providing a skid plate under the van to help protect the engine
from debris & obstacles that you might encounter in your adventures.

You need not be a confirmed off-roader to make use of bull bar. You'll see a wide
range of SUVs & trucks that never leave the blacktop that have a set installed. This is
because, in addition to adding protection, they also provide tremendous style & flair
for your van. You will discover that bull bar can fit very any van or SUV. There's sets
manufactured for Toyotas, for Fords, for Chevys & more. If you own a van or SUV,
then chances are lovely that you will be able to install a set of these beauties & enjoy
the increased style & protection they afford you. There is some controversy on their
use. While they can offer protection to a vehicle, they can also pose a risk to
pedestrians. A quantity of pedestrian deaths by collisions with bull bar equipped
vehicles led to the European Union banning them on new cars made after January
2003. Later ridged bull bar were banned as an aftermarket accessory by the Union.

However, in the United States & Australia they are still a frequent accessory. Australia
has passed some laws concerning the design of this type of equipment. Some
manufactures use plastic in their products which would deform & is thought about
safer for pedestrians & the vehicle in the happening of a collision. There are three
important designs of bull bars. Four designs replace the front bumper & is the
heaviest & most durable style & the other design acts as an addition to the front finish.
Style may block out lights, so it is common to get light mounting points on
aftermarket products. In the United States plenty of these products are made from
highly polished stainless steel, & are designed to look beautiful along with objective
of additional protection. Some manufactures offer 2 inch tubing that is powder
coating in black which may enhance the look of the bars.

If you are interested in adding a bull bar to your vehicle, you now have a variety of
styles & your choices are 2 inch tubing for heavy duty use, 2 & a half for lighter use,
& other products for a cosmetic look. If you are going through heavy brush &
possible encounters with animals, the heavier systems with skid plates are the ones
you ought to be evaluating. You will discover that bull bar can fit in any van or SUV.
There are sets manufactured for Toyotas, for Fords, for Chevys & more. If you own a
van or SUV, then chances are lovely that you will be able to install a set of these
beauties & enjoy the increased style & protection they afford you.


The bull bar of a vehicle requires a special system for Cooling, a gear ration which is
calibrated, an engine for power and some extra suspension as well. We at
http://ww.citytowbars.com.au provide Safe and Strong Bull Bar, Roof Racks and other
equipment to get you out enjoying the good life faster and safer.

								
To top