; elvisguide
Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

elvisguide

VIEWS: 5 PAGES: 9

  • pg 1
									   THIS IS THE FAMOUS ELVIS LOADER GUIDE YOU HAVE HEARD ABOUT


                                      DISCLAIMER:

THIS GUIDE IS FOR EDUCATIONAL PERPOSES ONLY. THIS GUIDE IS
NOT INTENDED TO BE USED TO RECEIVE ANY SATILIGHT SIGNAL
ILLEGALY. CHECK WITH YOUR LOCAL LAWS IF YOU ARE NOT
FAMILIAR WITH THEM. BY HAVING THIS GUIDE IN YOUR POSSION
YOU AGREE TO BE AN ADULT OF LEGAL AGE, AND NOT TO USE IT FOR
ILLEGAL PERPOSES. YOU TAKE FULL RESPONSIBILITY FOR ALL
YOUR ACTIONS. I WILL NOT BE HELD RESPONSIBLE FOR WHAT YOU
DO WITH THIS GUIDE. YOU HAVE BEEN WARNED. THIS GUIDE IS IN
NO WAY AFFILIATED WITH DSSCANUCK.COM OR BARON
TECHNOLOGIES INC.

I’m TYCOON. I have written this Guide to help Everyone get Started with this Great
Hobby. My Guide is by far the best written and most user Friendly Guide on the Net. I
have Updated the Guide 4 times and will continue to do so as long as files and scripts
continue to be written for the cards. I am a MOD for DSSCANUCK. I do NOT get
paid from him. I started in this Hobby 1 year ago and was helping DSSCANUCK
Customers in the Old Forums. DSSCANUCK saw fit to offer me a MOD Position. I
accepted and continued to offer the same level of Support I did in the past.
When I write these Guides I try the NEWEST SOFTWARE available. By doing so I
LOOP my share of cards. But before I post a guide, I write it, and then I test it by using
the Step-by-Step directions I put in the guide to assure that when you use it, YOU
WILL HAVE SUCCESS. I cannot offer help desk service to you. Everyone asks for
Step-by-Step directions and I have created them here for you. I do Spend a lot of time
helping others in the Forums and Writing these Guides for you.

For everyone who is using this Guide or one of the past guides Please consider making
a Donation to this Cause. I spend A LOT of Time Researching and and Testing the
Software so when you get this Guide, it will work for you. Think of this guide as a
well-written book. You would pay for a good book wouldn’t you?

I am PAYPAL Verified and will accept any Donation you see fit to send. Any
donation would be greatly appreciated.

You can send Pay pal Donations to: elvisguide@hotmail.com

You can sign up for PAYPAL at www.paypal.com


PLEASE HELP SUPORT THIS CAUSE AND ENJOY THIS GUIDE!!!!!!!!!!!!!!!!!!!!!
                              ELVIS LOADER GUIDE

I will try to explain What the Elvis Loader can do and How to do it. I will also explain
some of the Common Terms and what they mean.

Elvis can Program HU-Cards (HU-LOADER MODE),
Unloop H-Cards (UNLOOPER MODE)
Program Black Sunday H-cards (PHOENIX PROGRAMMER MODE),

On the next pages I will explain how to do all of these.

Here Is a List Of Some Of The Software you Will Use and What It Does. You can
download the software by clicking on the title.

Winzip 8.0      Is an UNZIPING file used to open satellite files. Download and
               INSTALL THIS FILE NOW.

WINEXP 4.6 Is a great smart card reading and writing program; it can be used to
           write SCRIPTS to H-CARDS. Unloop H-cards(when used with
           TURBOUNLOOP) and READ HU-cards. Some HU-scripts use
           WINEXP as well. Not to be confused with Windows Explorer.

TurboUnloop 1.1 Is a Great UNLOOPING software for H-cards or Black Sunday H-
                cards.

Summit Stealth 1.2 Is a Great 3M Program for B.S H-CARDS.

Merlin 2.0       IS A GREAT NEW PROGRAM FOR PROGRAMING HU-CARDS
                I think Merlin is the user-friendliest software for New Testers.

Arrowpointe 4.5 Is a Great CLEANING File for HU-CARDS

FLASHING PROGRAMS :
                            Atmel.exe will flash the loader so it can program
                            HU-Cards

                            SU2BS01 will flash the loader so it can be used with Black
                            Sunday H-cards.

                            WTXLOADER will flash the loader so it can unloop H-
                            cards or B.S. H-cards.
                                FLASHING THE LOADER.


   THIS SECTION IS FOR PEOPLE WHO ONLY WANT TO FLASH THE
   LOADER, AND DON’T WISH TO CONTINUE WITH THE REST
   OF THIS GUIDE. IF YOU WANT TO FOLLOW THIS GUIDE, SKIP THIS
   SECTION AND FOLLOW THE DIRECTIONS FOR WHAT YOU WANT TO
   PROGRAM.

   You will need to flash your loader for it to perform different Programming
   Functions. Your loader will NOT work unless you flash with the correct code.



   ATMEL.EXE- Allows the Loader to Clean and Program HU-cards.

   WTXLOADER- Allows the Loader to Unloop H-cards and B.S H-cards.

    SU2BS01- Allows the Loader to clean and Program B.S H-cards.

   I RECOMMEND YOU DOWNLOAD ALL THESE FLASH FILES TO THE
   A FLOPPY DISK.

To apply a Flash to the Loader

   1.   Turn on dip switches 1 and 5
   2.   Plug in the Loader
   3.   Insert Floppy with Flashing Files
   4.   Click on my computer
   5.   Double Click A drive
   6.   DOUBLE CLICK on the flash File you want to load. The screen will say
        programming verifying and done.
  .
Now your Loader is flashed to perform a specific function.
             PROGRAMING AVIRGIN HU-CARD WITH FREEWARE

You will need your Elvis Loader and ISO Programer

Files you need download them to a separate floppy Disk.
  Merlin 2.0
  ATMEL.EXE
  WINEXP 4.6

Put your VIRGIN HU-CARD in the receiver for 30 mins.

   1. Hook up the ISO PROGRAMER to COM-1
   2. After 30 mins has past remove card from the receiver and put it in the
       programmer.
   3. Open WINEXP 4.6
   4. Click on configure at the top and select P-3 mode (HU-mode)
   5. Click on the Camera Icon (this reads the card info)
   6. Look for USW it should be at 1. If not DO NOT CONTINUE.
   7. Unhook ISO Programmer and Hook up the ELVIS LOADER to COM-1
   8. Flip on dip switches 1 and 5 (turn the rest off)
   9. Plug in the POWER for the ELVIS LOADER
   10. BOOT Computer to DOS
   11. TYPE A: (ENTER)
   12. TYPE ATMEL.EXE (ENTER), Let the program run it will say Erasing,
       flashing, verifying and done (This will flash the loader with the code to program
       HU-cards)
   13. If the screen said done it worked, If you got an error try again
   14. Now that the code is on the chip flip on DIP SWITCH 2 AND 5(Turn the rest
       off)
   15. Open ARROWPOINT 4.5, Select READ CARD and INSERT the HU-card
   16. A box will open and ask to save as Bin or Hex. Save as HEX and name it good
       Hex (this will save the cards Hex in case you need it in the Future)
   17. Remove card and close Arrowpoint 4.5
   18. OPEN the file MERLIN 2.0
   19. Put in your Time Zone and ZIP Code, Select Area Identifier for your locals,
       (Select ADULT CHANALS if you DON’T want them)
   20. CLICK M3MV2 (this is the latest hash fix program)
   21. Now INSERT the HU-card (this will program the card now) IF YOU GET AN
       ERROR REMOVE CARD AND REINSERT.
   22. If the card Programming was successful go unplug Your Receiver for 5 minutes
       then PLUG it BACK in. Insert your card and turn on your receiver (IT WILL
       TAKE A FEW MINS FOR THE CHANALS TO RESET) If NOT CLEAN your
       card With ARROWPOINT 4.5 AND TRY TO PROGRAM AGAIN WITH
       MERLIN 2.0 IF YOU GET A MESSAGE ON THE SCREEN TO CALL
       CUSTOMER SERVICE AT EXT 711, 721, OR 745,REMOVE YOUR CARD
       AND UNPLUG YOUR RECIVER FOR 5 MINITES AND PLUG BACK IN
       AND REINSERET THE CARD. IF YOU STILL GET THE MSG YOU WILL
       NEED TO CLONE A GOOD CARDS BIN TO THE PROBLEM CARD.
       READ AND FOLLOW THE EASY STEP-BY-STEP CLONING
       INSTRUCTIONS ON THE NEXT PAGES.
      PROGRAMING AN ALLREADY PROGRAMED HU-CARD WITH
                        FREEWARE

You will need your Elvis FLASHED With ATMEL.EXE

FILES YOU WILL NEED download them to a Separate Floppy.

ARROWPOINT 4.5
MERLIN 2.0
After Flashing Elvis with ATMEL.EXE turn ON SWITCHES 2 and 5.

   1. Open ARROWPOINT 4.5 and SELECT CLEAN CARD
   2. INSERT THE ALLREADY PROGRAMED HU-CARD (THIS WILL CLEAN
      THE CARD)
   3. When it’s done remove card (now your card is cleaned and ready to be
      programmed)
   4. OPEN MERLIN 2.0
   5. Select your TIMEZONE, And ZIP CODE, Select AREA Identifier and select
      your local channels, Click ADULT Channels if you DON’T want them
   6. Click M3MV2 Icon (this is the latest hash fix)
   7. INSERT the HU-CARD into Elvis Loader (card will program now) IF YOU
      GET A ERROR REMOVE CARD AND REINSERT IT.
   8. If Successful go UNPLUG your RECIVER for 5 MINS. Then insert the card
      and turn on T.V. IT WILL TAKE A FEW MINS FOR ALL CHANALS TO
      APPEAR, JUST KEEP CHANGING CHANALS UNTILL ALL CHANALS
      APPEAR.

IF YOU GET CALL CUSTOMER SERVICE AT EXT 711, 721, OR 745 YOU WILL
NEED TO CLONE A GOOD CARDS BIN TO THIS PROBLEM CARD. JUST
FOLLOW THE EASY STEP-BY-STEP INSTRUCTIONS ON THE NEXT PAGES.
       CLONING A GOOD HU-CARDS HEX TO A PROBLEM CARD
ONLY DO THIS IF YOU CANNOT GET RID OF THE 711,721, OR 745 MSG BY
UNPLUGING THE RECIVER FOR 5 MINUTES WITHOUT THE HU-CARD
INSERTED. IF YOU HAVE A SUBED CARD I DO NOT RECOMMEND USING
IT FOR THE CLONING PROCESS, I RECOMMEND YOU CLONE A CARD THAT
HAS BEEN PROGRAMED ALLREADY AND WAS WORKING FINE. IF YOU
ARE GOING TO USE A SUBED CARD DO NOT CLEAN IT FIRST. SKIP STEPS
2-4. YOU DON’T WANT TO CLEAN A SUBED CARD, YOU WILL LOSE THE
CHANALS YOU PAY FOR.


You will need your ELVIS FLASHED with ATMEL.EXE, one WORKING
PROGRAMED HU-card and the Problem HU-card.

Files you will need. DOWNLOAD to a Floppy:

ARROWPOINT 4.5
After Elvis is Flashed with ATMEL.EXE TURN ON SWITCHES 2 AND 5

      1.  Open ARROWPOINT 4.5
      2.  CLICK CLEAN CARD BOX
      3.  A warning box will appear, this is NORMAL Click OK
      4.  INSERT THE WORKING PROGRAMED HU-CARD (this will clean the
          card)
      5. REMOVE The WORKING PROGRAMED HU-card
      6. Click READ CARD
      7. INSERT the WORKING PROGRAMED HU-card
      8. Once it reads the card it will ask you to save as a Bin or Hex. SAVE AS A
          HEX. Name it good hex. (Now you have a GOOD cards HEX saved.)
      9. REMOVE the HU-CARD
      10. Click on the Clean card Box
      11. INSERT THE PROBLEM CARD (This will clean the card)
      12. REMOVE the problem card
      13. CLICK on the INSTALL HEX BOX
      14. Next to the install hex box you will see a pull down arrow. Click it and
          select the GOOD HEX.
      15. INSRT THE PROBLEM CARD (Now you have a CLEANED and GOOD
          HEX on the Problem card)


IF ALL WENT OK WITHOUT AN ERROR YOU CAN PROCEDE TO PROGAM
THE CARD WITH THE: PROGRAMING A VIRGIN HU-CARD INSTRUCTIONS.
You will need to reprogram both cards since we Cleaned the Programming off them.
                    UNLOOPING With The ELVIS LOADER

ELVIS can be used to UNLOOP H-CARDS or Black Sunday H-CARDS.
ELVIS CANNOT UNLOOP HU-CARDS.


You Will Need your ELVIS LOADER in UNLOOPER MODE.


Files you need, Download them to a separate Floppy Disk.
 WINEXP 4.6
 TURBOUNLOOP 1.1
 WTXLOADER

Hook up ELVIS to COM-1 and turn on dipswitches 1 and 5 (turn the rest off) Then
Power up ELVIS.
   1. BOOT computer to DOS
   2. Type A (enter)
   3. WTXLOADER (enter) Let The Program Run, It will say Erasing,
       Programming, Verifying, and Done. (This Will FLASH the Loader with the
       code to unloop H-CARDS, and B.S H-CARDS)
   4. REBOOT CPU TO WINDOWS
   5. Open TURBOUNLOOP (Win4.6 should open by its self)
   6. Make Sure at the top of the screen SAYS WIN 4.6 (only 4.6 will work)
   7. Then you need to click on the CONFIG. TAB at the top of screen.
   8. Then you need to click on PROGRAM PERAMETERS.
   9. LOOK at the Quick SETTINGS, Click the ARROW so it says UNLOOPER
       then click OK.
   10. To UNLOOP card Click on RUN SCRIPT (It’s the ICON with a hand holding a paper)
   11. Now Click FIX CARD Icon ( This will run the script)
   12. NOW INSERT YOUR CARD, and let it run it will say when it’s done. It will also tell you
       the Status of your card.


Now you’re Card is UNLOOPED. And ready to be CLEANED using the PHOENIX
PROGRAMER mode to use with a BOOTLOADER or EMU SETUP.
             PHOENIX PROGRAMING with the ELVIS LOADER

ELVIS can Program a BLACK SUNDAY H-CARD For use with a BOOTLOADER or
EMULATOR.

You will need you ELVIS loader in PHOENIX (programmer) MODE. To PROGRAM
a B.S. H- CARD.

Files you will need DOWNLOAD them to a separate floppy.
WINEXP 4.6
SU2BS01.EXE
BASIC-H 3.2

Hook up ELVIS to com-1 and TURN ON dipswitches 1 and 5 (turn the rest off) Then
POWER UP ELVIS.

      1. FIRST USE MY UNLOOPER INSTRUCTIONS AND UNLOOP YOU
          B.S. CARD. WHEN YOUR DONE UNLOOPING CONTINUE ON.
      2. BOOT computer to DOS
      3. Type A: (ENTER)
      4. TYPE: SU2BS01 (ENTER). Let the program run it will say ERASING,
          PROGRAMING, VERIFING, and DONE. (This will flash Elvis so it can
          read and program B.S. cards)
      5. REBOOT Cpu to Windows
      6. UNPLUG ELVIS and turn On DIP SWITCH 5(the rest off)
      7. INSERT The B.S. H-CARD and POWER UP Elvis (Now you are in
          PHOENIX PROGRAMER Mode)
      8. OPEN BASIC-H 3.2
      9. Click on the normal button on the BOTOM of the page(It should say
          EXPERT now)
      10. Click on the YELLOW DOOR icon (this opens the E-3 hole)
      11. Click on the MAGNIFING GLASS icon (this reads the E-PROM)
      12. Click on the ARROW icon (next to the AMBULANCE) and SELECT
          CLEAN TO 26 UPDATES (this cleans the bin image)
      13. Clean to 26 updates again
      14. Put a floppy in A: drive
      15. Select FILE then SAVE (name it my bin) now you have a clean bin file on
          disk in case you need it later.
      16. Click on the LIGHTNING BOLT icon (this writes the clean bin to the card)
      17. Click on the BROWN DOOR icon (this CLOSES the E-3 hole)

Now your card is CLEANED. And ready to be programmed with a SCRIPT to use in a
BOOTLOADER SETUP, or ready to be EDITED and AUXED for an EMU SETUP.
        PROGRAMING A BS H-CARD FOR USE IN A BOOTLOADER.


If you have UNLOOPED and CLEANED the B.S H-card you can follow these
instructions to program the card to work with a BOOTLOADER.

Files you will need download them to a Floppy:
SUMMIT STEALTH 1.2

YOU WILL NEED YOU ELVIS FLASHED WITH SU2BS01

       1. UNPLUG ELVIS
       2. TURN ON SWITCH 5
       3. INSERT THE B.S H-CARD
       4. PLUG IN ELVIS (Both LEDS should be ON)
       5. Open SUMMIT STEALTH 1.2 (WIN4.6 should open)
       6. Click the CONFIGURE TAB at the TOP
       7. Click the PROGRAM PERAMITORS TAB
       8. Select dss P-2 H-settings
       9. Click OK
       10. Click the RUN SCRIPT ICON (it’s a hand holding a paper icon)
       11. Click install Script
       12. It will ask you for Time zone, Zip code, password (use a simple one) and
           Guide Byte (use 49)
       13. It will ask you if you are sure you want to INSTALL this script, Click OK
           (This will INSTALL SUMMIT STEALTH)

If Summit Stealth loaded ok REMOVE card INSERT it in to a BOOTLOADER and
INSERT the BOOTLOADER into the Receiver. Turn on T.V



Once again I’m TYCOON. Let me know how this Guide worked for you. If you notice
something needs to be changed let me know and I will look in to it. If you enjoyed this
Guide and it worked for you, please consider making a donation towards this cause
with PAY PAL at: elvisguide@hotmail.com

THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

								
To top