Docstoc

FDC - Ausschreibungstext

Document Sample
FDC - Ausschreibungstext Powered By Docstoc
					Specification Guide - Kaba FDC drive unit for swing door

Tender Text:

a) Automatic swing door drive unit shall be Kaba FDC with low-noise and low-
   energy electro-mechanical design; comply with the requirement DIN 18650 and
   is verified by TüV, or equivalent system.
b) Automatic swing door unit shall incorporate the following features:
     i.    To be operated electro-mechanical design (no electro-hydraulic – to ensure
           quiet operation and low overall maintenance cost)
     ii. The max closing force is smaller than or equal to 150N
     iii. be capable of adjusting opening speed, closing speed, door opening angle
           (70o – 95o) and hold-open time (1 – 30sec)
     iv. The system shall be low energy consumption (< 100W)
     v. The system shall come with normal rod (or with parallel rod or with
           sliding rod), including all other necessary support frame and power
           connection
     vi. The system shall come with safety sensor Eye-tech, or equivalent on both
           side of the door panel
     vii. The system shall come with activating sensor on both side of the door
           (Please select the appropriate sensor)
            - Option 1: Eagle 6 sensor or equivalent
            - Option 2: Magic Switch or equivalent
            - Option 3: Push Plate or equivalent
     viii. Automatic swing door unit is to be approved by the Architect as being of
           equal quality

BQ Text:

Automatic swing door drive unit shall be Kaba FDC with low-noise and low-energy
consumption (< 100W power consumption) electro-mechanical design, together with
appropriate activating and safety sensor; comply with the requirement DIN 18650
and is verified by TüV, or equivalent system.




Kaba Limited                                                                 Page 1 of 5
2108 Futura Plaza, 111 – 113 Futura Plaza, Kwun Tong, Kowloon, Hong Kong
Tel : +852 2375 6110 Tel (Macau Toll Free) : Tel +800 348
Fax : +852 2406 2602
sales@klh.kaba.com, www.kaba.hk
Particular Specification:

The automatic swing door drive unit shall
a) be operated electro-mechanical design (instead of electro-hydraulic design) and
   opening by motor actuated action and closing by spring action with closing force
   smaller than or equal to 150N
b) be small in size with dimension max 530 x 100 x 104mm
c) be capable of operating doors of weight up to 222kg (max up to 367kg) and width
   0.9m (i.e. min door width for wheelchair users)
d)
                                                             Wing weight (kg)
        Wing width (mm)
                                  with normal rod            with parallel rod   with sliding rod
                0.7                     367                        286                   -
                0.8                     281                        219                   -
                0.9                     222                        173                 173
                1.0                     180                        140                 140
                1.1                     149                        116                 116
                1.2                     125                         97                  97
                1.3                     107                         83                  83
                1.4                      92                         71                  71

e) be capable of operating in low energy consumption (< 100W)
f) be capable of operating within a temperature range between -15oC to 70oC and
   maximum humidity 65%
g) be capable of adjusting opening speed, closing speed, door opening angle (70o –
   95o) and hold-open time (1 – 30sec)
h) be capable of working interlock operation
i) be capable of operating 500,000 test cycles with 2,400 per day as per DIN 18650
j) be capable of achieving IP 30 degree of protection
k) be capable and approved for installation of fire resisting doors and shall meet BS
   EN 1154 size 3 – 6 and BS 476 Part 22, in all cases, meet the requirements of
   the Building Department

Codes and Standards

The automatic swing door drive shall comply with the codes and standards, or
internationally equivalent standards:
a) German standard DIN 18650-1 and 18650-2 with verified by recognized third
    party, such as TüV Nord
b) EN 1154 size EN 3 – 6 for controlled door closing
c) BS 476 Part 22 for Fire tests on building materials and structures.

Complete System Requirement

a) Automatic swing door unit
    i) Drive unit
       To be electro-mechanical design, self-contained drive unit, low power
       consumption (< 100W), with only one moving part, ensuring superior
Kaba Limited                                                                                        Page 2 of 5
2108 Futura Plaza, 111 – 113 Futura Plaza, Kwun Tong, Kowloon, Hong Kong
Tel : +852 2375 6110 Tel (Macau Toll Free) : Tel +800 348
Fax : +852 2406 2602
sales@klh.kaba.com, www.kaba.hk
             reliability and low overall maintenance; to be non-handed to insure
             maximum versatility in adapting to varying field conditions; to be sealed in a
             housing against dust, dirt and moisture (Protection rating IP 30)
      ii)    Electronic control
             The drive unit is to be controlled by a self-contained switch and
             potentiometer. The control shall adjust the functions of drive unit, opening &
             closing speed and hold-open time (1 – 30sec)
      iii)   Connecting Hardware
             The surface mounted operator is to be connected to the door by means of a
             steel arm with normal rod (or with parallel rod or with sliding rod). The
             door arm shall be secured to the swing door as per the suppliers’
             recommendations
      iv)    Motor actuated open
             The automatic swing door unit shall power the door open by forces
             transmitted mechanically to the drive shaft and shall maintain a constant
             engagement throughout the opening cycle
      v)     Spring close
             The automatic swing door unit shall be spring closed as a normal door. The
             spring shall be non-handed and shall return the door to full close position.

b) Arm type
   For general entrance application, push or pull arm compatible with the operator
   shall be used. Special consideration shall be taken for fire-resisting doors in
   compliance with the statutory requirements and relevant British Standards or
   internationally equivalent standards (Please select the appropriate arm type
   for your own application, if needed)

                          Pushing                                            Pulling
                                              Installation against lintel
                        - Normal rod                                    - Parallel rod
                                                                         - Sliding rod
                                     Door leaf installation (if required)
                        - Normal rod                                            -

c) Program selector
   Each drive unit shall be equipped with integrated program selector switch, which
   is equipped on the drive unit cover with the following functions:
   “Automatic”      : Automatic operation. The door can be opened from both sides
   “Manual”         : The inner and outer activation units are disconnected
   “Open”           : The door is permanently opened

d) Activating device
   To comply with the following physical and performance requirement (Please
   design the combination of the activating devices). The activating device shall
   be installed at the both side of each entrance and recessed into wall

    Option 1: Motion detector (Eagle 6, or equivalent)

      Technology                                           Microwave and micro-processor
Kaba Limited                                                                               Page 3 of 5
2108 Futura Plaza, 111 – 113 Futura Plaza, Kwun Tong, Kowloon, Hong Kong
Tel : +852 2375 6110 Tel (Macau Toll Free) : Tel +800 348
Fax : +852 2406 2602
sales@klh.kaba.com, www.kaba.hk
      Detection mode                                       Motion
      Detection area                                       Adjustable
           - wide sensing field                                  - 4m (W) x 2m (D)
           - narrow sensing field                                - 2m (W) x 2.5m (D)
      Mounting height                                      maximum 3m
      Output hold time                                     0.5sec
      Immunity                                             Electromagnetic compatibility (EMC) according
                                                           to 89/336/EEC
                                                                   o
      Temperature range                                    -20 – 55 C
      Degree of protection                                 IP54
      Housing material                                     ABS
      Mounting method                                      Surface mount / Conceal

    Option 2: Contactless switch (Magic Switch, or equivalent)

      Technology                                           Microwave
      Detection mode                                       Motion
      Detection area                                       10 – 50cm adjustable
      Output hold time                                     0.5 - 10sec (adjustable)
      Immunity                                             Electromagnetic compatibility (EMC) according
                                                           to 89/336/EEC
                                                                    o
      Temperature range                                    -20 – 55 C
      Degree of protection                                 IP52
      Housing material                                     ABS
      Mounting method                                      Surface mount / Conceal

    Option 3: Mechanical switch (Push Plate, or equivalent)

      Technology                                           Mechanical
      Type of use                                          Outdoor / indoor
      Size                                                 120mm (H) x 120mm (W) x 16mm (D)
                                                           or 150mm (Dia) x 16mm (D)
                                                           or 120mm (H) x 38mm (W) x 16mm (D)
                                                                   o
      Temperature range                                    -20 – 55 C
      Degree of protection                                 IP52
      Housing material                                     Stainless steel
      Mounting method                                      Surface mount

e) Safety Device (Eye-Tech, or equivalent)
   To comply with the following physical and performance requirement, the safety
   device shall be mounted on the top and both sides of each door leaf

      Technology                                               Active infra-red
      Detection mode                                           presence and motion
      Detection range                                          0.7m to 2.5m (Adjustable)
      Diameter of infra-red spot                               0.13m at 2m height
      Detection signal duration (presence)                     Infinite
      Response time                                            < 50ms
      Output hold time                                         0.1 – 4.5sec (Adjustable)
      Immunity                                                 Electrical and radio frequency interferences
                                                                        o
      Temperature range                                        -20 – 55 C
      Degree of protection                                     IP52
      Length                                                   Minimum 900mm for each side of door leaf
      Housing material                                         Aluminum housing with ABS and Plexiglas
Kaba Limited                                                                                          Page 4 of 5
2108 Futura Plaza, 111 – 113 Futura Plaza, Kwun Tong, Kowloon, Hong Kong
Tel : +852 2375 6110 Tel (Macau Toll Free) : Tel +800 348
Fax : +852 2406 2602
sales@klh.kaba.com, www.kaba.hk
      Mounting method                                          Surface mount

f) Emergency Access
    i) The automatic door system shall be fail-safe and shall act as normal door
        closer upon power failure operation
    ii) Allow emergency access by means of manual override or other appropriate
        mechanism approved by the Architect

g) Ironmongery
   The door assembly shall be fitted with stainless steel hinges and other hardware
   and ironmongery products necessary for the satisfactory installation of the door
   system, and shall be prepared to accept other hardware and ironmongery
   products specified elsewhere in the Specification and shown in the Drawings


Inquiries: Kaba Ltd at +852 2375 6110 or sales@klh.kaba.com




Kaba Limited                                                                   Page 5 of 5
2108 Futura Plaza, 111 – 113 Futura Plaza, Kwun Tong, Kowloon, Hong Kong
Tel : +852 2375 6110 Tel (Macau Toll Free) : Tel +800 348
Fax : +852 2406 2602
sales@klh.kaba.com, www.kaba.hk

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:86
posted:1/15/2011
language:English
pages:5