Learning Center
Plans & pricing Sign in
Sign Out



									                 SYSTEXX ComforT V22
                 Technical DaTa SheeT

              →	 ProPerties:
                 Systexx Comfort V22 non-woven glass fiber is an improvement over conventional cellulose fleece for a number of
                 reasons: whether dry or wet it can be easily cut, even freehand, without ripping or flossing. It prevents unwanted        IN TEXTILES
                 imperfections as it cannot be compressed. It neither shrinks nor stretches, and is therefore an ideal substrate      Tested for harmful substances
                                                                                                                                      according to Oeko-Tex Standard 100
                                                                                                                                      No 10.0.75907        Fl Hohenstein
                 for decorative coatings and filling techniques.
                 All the Systexx wall coverings have brand certification in accordance with DIN EN 350-:2007, and meet Class                  Class 3
                 b-s, d0. Systexx Comfort V22 meets Öko-Tex Class 3.
                                                                                                                                              ty m     m
              →	 tyPical	aPPlication:


                 Due to the water activatable adhesive coating on the back, Systexx Comfort V22 is an economical wall covering for
                 the interiors of commercial and private buildings. Individual designs can be achieved through the use of suitable
                 creative techniques.

              →	 technical	Parameters/roll	style:

                  Product                              aPProx.	weight	         aPProx.	width	           lengths	 	
                                                           in	g/m²                 in	cm               in	meters	

                  systexx	comfort	V22                          215                    100                   30
/4 _200

                 Systexx by Vitrulan is a brand name of the Vitrulan Textilglas GmbH and is produced in Northern Bavaria.
                 SYSTEXX ComforT V22
                 Technical DaTa SheeT

              →	 aPPlication:
                 important	for	all	products:
                 Do not apply when the temperature of the room or wall is less than +8 °C. only use products with the same serial number on adjacent surfaces
                 (printed on the outside of the box). Sheet length = wall/ceiling measurement plus 5–0 cm. Cut off the excess cleanly.

                 1_	application	with	the	aqua	quick	machine
                 Pull the material through the Aqua Quick machine and fold together in loops. The integrated adhesive becomes active within approximately
                  minute while 2–3 minutes of activation time are necessary for ceiling application. See the Aqua Quick instructions for further information.
                 At normal room temperature (8 °C) the drying time is 7–2 hours.

                 2_	avoid	differences	in	texture
                 Never paste the product upside down or inside out. The marking on the back provides orientation. When glued, the distance between the
                 marking on the back is  m from one sheet to the next.

                 3_	Butt-join	the	fleece/use	double	edge	cut
                 Butt-join the trimmed Systexx Comfort V22 or apply with the double-edge cut method.
                 The sheets must have very good contact near the seams.
                 Any adhesive left on the front of the fabric should be removed immediately with a damp clean cloth.

                 4_	Press	on	and	cut	off
                 Apply enough pressure with a wallpapering squeegee over the whole area to remove bubbles.
                 Push the excess carefully into the corners and trim it off along the edge of the wallpapering squeegee
                 or cutting ruler using a sharp-bladed cutter.
                 Applying to outer corners: use a fine grade of wet abrasive paper (≥ P 240) to lightly sand off the product
                 at the edges (without sanding through), press around the edge and press out the bubbles.

                 5_	coating
                 st coat: apply the paint evenly after the product has fully dried. observe the paint manufacturer’s instructions for application.
                 2nd coat: only do this after the st coat of paint has fully dried.
                 Paint consumption: 80–220 g/m2 for the st coat, 90–50 g/m2 for the 2nd coat

                 A single coat is usually enough for white and lightly colored matt or silk luster finishes.
                 The quantity required depends on the fabric structure and on the substrate. You will need to determine accurate values to allocate
                 applications to the building. Similarly, please also observe the technical data sheets for those products that will also be used.

                  coating	according	to	degree	of	gloss

                  desired	sealing	coat:                                      required	Priming	coat:

                  mATT                                                       mATT

                  SATIN mATT                                                 mATT, SATIN mATT

                  SIlk luSTEr                                                SATIN mATT, SIlk luSTEr

                  HIGH GloSS                                                 SIlk luSTEr, HIGH GloSS
2/4 _200

                 Systexx by Vitrulan is a brand name of the Vitrulan Textilglas GmbH and is produced in Northern Bavaria.
              SYSTEXX ComforT V22
              Technical DaTa SheeT

              6_	substrate	preparation
              The substrate must be dry, clean, smooth and stable. remove old wall coverings and unstable coatings. Smooth any stable substrates that
              are rough or uneven; fill any holes with filler. Ideally the substrate is to be prepared in such a way that any imperfections such as extra
              graininess or small uneven locations can largely be avoided. marks left by preparation work should be ≤  mm. Achieve this by treating the
              surface with a smoothing plaster or smoothing pass over a large area. Porous substrates should first be treated with a suitable primer.
              remove any mould or fungus, and treat according to the relevant guidelines.

               suBstrate                                             PreParation	

               exPosed	concrete                                      1.	remoVe	coarse	roughness.	
                                                                     2.	aPPly	seVeral	coats	of	leVeling	finisher.	
                                                                     3.	sand	and	Prime.	
               Porous	concrete,	filigran	concrete                    1.	clean	(scraPe,	sand).	
                                                                     2.	fill	larger	holes.
                                                                     3.	sand	and	Prime.
               Very	sandy	Plaster                                    1.	sand	down	(remoVe	loose	Parts).	
                                                                     2.	fix/Prime	the	surface
                                                                     3.	for	fine	texture	and	fleece:	smooth	fill	and	Prime.
               Very	coarse	structured	Plaster                        1.	remoVe	coarse	roughness	
                                                                     2.	aPPly	seVeral	coats	of	leVeling	finisher
                                                                     3.	sand	and	Prime.
               Very	Porous	Plaster	(e.g.	gyPsum	Plaster)                P
                                                                     1.		 rime	(rough	suBstrates	should	first	Be	sanded).	 	
                                                                        smooth	fill	if	necessary.	
               normally	Porous	Plaster	                                 s
                                                                     1.		 and	off	any	sintered	skin	that	may	Be	Present	and	eVen	out	 	
                                                                        with	filler.	
                                                                     2.	treat	with	Primer.	
               striPPaBle	wallPaPer                                  1.	loosen	By	moistening.	
                                                                     2.	scraPe	off.	
                                                                     3.	sand,	fill	again	if	necessary,	and	Prime.
               cleaVaBle	or	dry	remoVaBle	wallPaPers                 1.	comPletely	remoVe	the	wallPaPer.	
                                                                     2.	if	necessary:	smooth	fill,	sand	and	Prime.
               wallPaPer	residues	(e.g.	woodchiP	)                   1.	remoVe	any	remaining	wallPaPer,	and	correct	damaged	surfaces.	
                                                                     2.	sand	off	any	wallPaPer	residues	and	filled	areas.	
                                                                     3.	Prime	the	surface	and/or	any	filled	areas.	
               flaky	old	coating	                                    1.	remoVe	any	loose,	Poorly	adhering	coatings	(manually	or	By	machine).	
                                                                     2.	sand	and	Prime	the	surfaces.
               distemPer	coatings                                    1.	remoVe	comPletely	By	scraPing/washing.	
                                                                     2.	Prime.	
               glossy	Paint	coatings                                 1.	treat	with	lye	or	roughen.	
                                                                     2.	if	necessary,	first	aPPly	keying	Primer.
               glass	faBric                                             a
                                                                     1.		 PPly	filler	to	textures	(seVeral	times	if	necessary	 	
                                                                        for	coarse	textures*).	
                                                                     2.	sand	and	Prime.
               PlasterBoard	Panels	                                  1.	initial	filler.		intermediate	sanding.		smooth	fill.
                                                                     2.	sand	and	Prime.
               osB	Panels,	wood,	hardBoard                           1.	insulate/Block	off	the	suBstrate,	first	sand	if	necessary.	
                                                                     2.	smooth	fill.
                                                                     3.	sand	and	Prime.
               ceramic	tiles                                         1.	clean	and	degrease	the	tiles.	
                                                                     2.	aPPly	keying	Primer	(etching	Primer/Primer	for	ceramic	and	glass).	
                                                                     3.	comPletely	fill	any	joints	or	surfaces.	
                                                                     4.	sand	and	Prime.
               rusty	steel	surfaces                                  1.	remoVe	rust	from	the	surfaces
                                                                     2.	aPPly	an	anti-corrosiVe	Primer.	
               Bleeding	surfaces	(e.g.	water	stains)                 1.	insulate.	
                                                                     2.	fill	rough	surfaces.	
                                                                     3.	Prime.
               nicotine	and	soot	dePosits                            1.	treat	with	an	insulating	Protection	layer.

               *	 	 therwise	you	will	get	an	irregular,	striPed	Pattern	texture	which	will	look	extremely	unattractiVe	after	Painting!
3/4 _200

              Systexx by Vitrulan is a brand name of the Vitrulan Textilglas GmbH and is produced in Northern Bavaria.
                 SYSTEXX ComforT V22
                 Technical DaTa SheeT

              →	 exPosure	classes/Paint	systems:

                   areas	of	aPPlication                                       material	qualities                                            stress	leVel               suitaBle	coatings
                                                                                                                                                                       (SuITABlE BY STrESS lEVEl)
                                                                              systexx	            systexx	 systexx	 systexx	
                                                                              Premium*/	          ComforT ComforT ACTIVE
                                                                              actiVe	l65/	                 V22      m39
                                                                              actiVe	s38*

                   commercial	          e.g.	comPany	Buildings	                                                                             normal	to	                 high-quality	disPersion	Paint	
                   Premises             (offICE, AIrPorT,                                                                                   high                       (NormAl)
                                        STADIum, BANk)                                                                                                                 latex	Paint,	
                                        PuBlic	Buildings	                                                                                                              Pure	acrylate	Paint
                                        (ADmINISTrATIoN,                                                                                                               (HIGH)
                                        SoCIAl ArEAS,                               +++               +++           +++           +++
                                        EXHIBITIoN ArEAS)
                                        (HoTEl, rESTAurANT,
                                        BAr, ETC.)
                                        sales	areas
                   Playrooms	           e.g.	nursery	and	                                                                                   high	to	 	                 latex	Paint,	Pure	acrylate	
                   and	class-           Pre-school/                                                                                         extreme                    Paint (HIGH),
                   rooms                institutions	                               +++               ++             +            +++                                  water-dilutaBle	2-comPonent	
                                        schools/	                                                                                                                      Paint	e.g.	Polyurethane	or	
                                        uniVersities                                                                                                                   ePoxy	resin	(EXTrEmE)
                   residential	 e.g.	PriVate	aPartments/                                                                                    normal	to	                 high-quality	disPersion	Paint	
                   areas        rented	aPartments                                                                                           high                       (NormAl)
                                (lIVING roomS, HAllS)                               +++               +++            ++           +++                                  latex	Paint,	Pure	 	
                                social	housing                                                                                                                         acrylate	Paint	 	
                                (STAIrWEllS, ETC.)                                                                                                                     (HIGH)
                   wet	rooms            e.g.	indoor	                                                                                        high	to	 	                 latex	Paint,	Pure	acrylate	
                                        swimming	Pools/                                                                                     extreme                    Paint	(HIGH), water-dilutaBle	 	
                                        wellness	centres/                           +++               ++             +             +                                   2-comPonent	Paint	e.g.	 	
                                        PriVate	Bathrooms                                                                                                              Polyurethane	or	ePoxy	resin	
                   hygiene	             e.g.	doctors’	                        oPErATING           oPEr­   oPEr­               oPEr­         normal (oPErAT­            high-quality	disPersion	Paint
                   rooms                oPerating	rooms/                      roomS,              ATING   ATING               ATING         ING roomS)                 (NormAl)
                                        hosPitals/                            rETIrEmENT          roomS   roomS               roomS         high (rETIrE­              latex	Paint,	Pure	acrylate	
                                        laBoratories/                         HomES,              rETIrE­                     rETIrE­       mENT HomES)                Paint	(HIGH), water-dilutaBle	
                                        retirement	homes                      lABorA­             mENT                        mENT          extreme	(lABo­             2-comPonent	Paint	
                                                                              TorIES,             HomES                       HomES         rATorIES, oPEr­            (Polyurethane	or	ePoxy	resin)	
                                                                              HoSPITAlS                                                     ATING roomS,               (EXTrEmE)
                                                                                  +++                 ++             +             ++       INTENSIVE CArE)
                   Production	 e.g.	Bakeries/                                                                                               high	to	                   latex	Paint,	Pure	acrylate	
                   rooms       slaughter	houses/                                                                                            extreme                    Paint (HIGH), water-dilutaBle	
                               industrial	kitchens                                  +++               ++             +             ++                                  2-comPonent	Paint	 	
                                                                                                                                                                       (Polyurethane	or	ePoxy	resin)	

                  *		 itrulan’s	lifetime	warranty	aPPlies	to	these	Products.
                  +++	=	Particularly	suitaBle	   ++	=	quite	suitaBle	   +	=	suitaBle

              →	 imPortant:
                 In spite of strict quality controls, the nature of production means that small faults can occur. These are marked at the edge of the material,
                 and compensated for by an additional 0.5 metre length. Complaints made after more than 0 sheets have been laid cannot be accepted.

              →	 storage:
                 Store the rolls in a dry, clean place.

                 general	note:
4/4 _200

                 Since this data sheet cannot deal with every possible problem that can occur in actual practice, liability cannot be derived from it. In every case, the user is obliged to assess the application
                 professionally in the light of the suitability of the product and of the substrate. Please observe applicable regional building codes. In case of doubt, the technical application consultation service
                 of Vitrulan Textilglas GmbH should be contacted.

                 Systexx by Vitrulan is a brand name of the Vitrulan Textilglas GmbH and is produced in Northern Bavaria.

To top