PR E- G ROU T I N G PR OT ECT ION
UNTREATED TREATED UNTREATED TREATED
UNPOLISHED STONE AND
Anti-stain testing carried out on Vicenza Stone and terracotta.
The untreated section absorbed the cement deep down, which made washing after laying difficult.
The treated part did not absorb the cement, which was easy to remove with a specific detergent.
WHAT IT’S FOR ADVANTAGES HOW IT’S USED
Water-repellent protector against It protects from dirt caused by grou- No dilution: ready to use
laying dirt, that makes grouting and cle- ting.
aning easier without altering the mate- It does not affect adhesion between
Shake the can before opening. Make sure
rial’s appearance. grout and material. the surface to be treated is completely
Ideal for absorbent materials such as It makes cleaning after laying simple. free of dust. Apply an even coat of FILA
terracotta, quarry tiles, natural and It reduces drying times, making subse- PRW200 using an airless spray pump, avoi-
reconstructed stone and agglomerates. quent treatment faster. ding surface pooling. A paintbrush or fleece
It does not alter the material’s appea- applicator pad may also be used. Ensure
rance. the product also covers the edges of the
VOC free: it does not release toxic laid material.
emissions. Grouting can be applied the day after
Non sacrificial. laying, taking care to sponge off the excess
Easy to apply. before it dries completely.
Once matured, wash using the most suita-
After the application it is possible to
ble detergent for the kind of material used.
apply any kind of protection treatment.
COVERAGE diluted solution of FilaCleaner.
With one litre:
Terracotta 7/10 m2
Packaging Stone 10/20 m2
1 litre flasks in box of 12. “Coverage rates are approximate and refer to a
single coat of the product”
PRECAUTIONS LABELING TECHNICAL INFORMATION
• The product is not frost-proof in its can. No risk or safety labels or warningsare required since Appearance: liquid
• Keep out of the reach of children. the product is not classified as hazardous under cur- Colour: milky white
rent regulations. Odour: distinctive, resiny
Storage temperature: between 5° C and 30° C. Density: 0.999 kg/litre
Must be applied to material at temperatures between pH: 5.5
10° and 30° C. VOC: 0 g/l
The information above reflects our latest technical know-
how and is the outcome of ongoing laboratory research and
Mix of water-dispersed emulsified resins.
testing. However, some factors are beyond our control. It is
essential to integrate our suggestions with your own on-site
preliminary tests and check. Fila accepts no liability for
improper use of its products.
DO/LB 13 REV. 00 02/12/09