drilling_rigs_gyp_11_3_dh_f_320

Document Sample
drilling_rigs_gyp_11_3_dh_f_320 Powered By Docstoc
					                                                         GYP RIG No: 11
        GYP RIG No.11                                      3 DH F 320
         3 DH F 320




1.1 DRAWWORKS

Make and Model                            Upetrom type TF-38 Drawworks


Rated Input Horsepower                    2000 HP max. input power

Auxiliary brake                           Upetrom type FH-60” dia. hydraulic brake complete.

Crown Protection                          yes with Crown- o- matic devices
Power Source                              3 ea CAT 3512 diesel engines
Drill line                                1 3/8” 6*19 IWRC 5000 ft
                                          Upetrom sand reel assembly, drum capacity 20000 ft with 14 mm dia.
Sand Line
                                          wireline, W/all standard equipment.

1.2 RIG DRIVE AND/OR POWER UNITS
                                          (3) Three caterpillar model D-3512 DITA turbo charged after cooled
Make and Model engines                    diesel engine, 1460 HP at 1500 RPM with exhaust lines, shields and
                                          oilfield skid complete
                                          (2) Two caterpillar C-18 generator engines. 700 KVA at 1500 RPM with
Make and Model generators
                                          oilfield skid mounted. 50 Hz., 230-400 Volts
Make and specification of SCR unit        Shields W/ Alternator Cat LC7024J
Power available to Drawworks              2000 hp
Power available to rotary                 YES
Power available to pump                   2920 HP
1.3 MAST AND SUBSTUCTURE
 Make, height and base                    Upetrom type MA-320 drilling mast, 144 ft height,
 Floor height                             22 ft

Free height under rotary beams            18 ft

Casing capacity and simultaneous set back 440000 lbs pipe set back, W/ 320 stands with 5” OD DP racking
capacity/ Pipe Racking capacity           capacity
                                          gross nominal capacity= 1.190.000 Lbs.,
 Rated static and hook load capacity
                                          maximum hook load capacity 705.000Lbs
                                          Upetrom type 6-35-GF-400 crown block max. hook load 400 tons W/6
  Crown block make and a sheaves
                                          sheaves, sheaves outer diameter 1400 mm. Grooved for 1 3/8” dia.
available
                                          wireline W/ frame assy
                                          Stabbing board travelling height 17 ft up to 56 ft with electric hoist
 Stabbing board
                                          motor.

1.4 MUD PUMP NO:1 & 2 & 3

                                          2 ea. Upetrom 2 PN 1258 dublex pump complete/ 1ea. OILWELL
Number, make and Model
                                          1100 PT triplex pump
                                          2 ea 2 PN 1258 pump dependent drive, 1 ea OILWELL 1100 PT
Powered by
                                          pump independent drive by CAT 399 Diesel engine


                                          Upetrom type AP-350 pulsation dampener,350 Atm. max. working
Pulsation Dampeners
                                          pressure.


                                                        1
                                            16” stroke length, liner size 8”, 6 3/4",6" (12,49 Gal/st-2263 psi , 8,56
     liner   sizes/     discharge    volume gal/st-3292 psi, 6,5 Gal/str- 4351 psi)
(gallon/stroke)- rated working pressure     10" stroke length, liner sizes 5 1/2",6", 6 1/2" (3,1 Gal/st-3700 psi, 3,7
                                            gal/st-3110 psi, 4,3 Gal/stk-2650 psi)

Working pressure                             %80 of rated working pressure shall be applicable.
1.5 ROTARY TABLE
Make and Model                               1 Upetrom MRL-275 rotary table 27 ½” opening dia.
Capacity                                     500 tons max static. Load /
Powered by                                   W/ shaft assy. 250 RPM max. rotating speed

Bushing inserts                              Varco bushing inserts

1.6 SWIVEL
                                             2 ea.Upetrom CH-400 swivel 400 tons rated capacity 3” fluid passage
Make and Model
                                             W/ 6 5/8” Reg. LH connection.
1.7 KELLY SPINNER
Make and Model                               International model A6C-2 kelly spinner

1.8 ROTARY HOSES

                                             Dual stand pipe 4”x5000 psi WP. 2 ea.Rotary hose 3 1/2'' ID x 5000 psi
Number size and rating
                                             working pressure 60 ft length
1.9 GEOLOGRAPH
     Number, make and type                   M/D Drill- O-Graph (6) pens penetration recorder


2.0 DRILL PIPE

                                             4500 meters 5'' DP Tool joint size 6 5/8” OD x 2 3/4'' ID S-Grade
DP
                                             premium (19,5 ppf , 4 1/2“ IF),
HWDP                                         12 ea. 5” OD , 49.3 ppf, 4 ½” IF
2.1 DRILL COLLARS
DC                                           21 ea. 6 1/2'' OD x 2 1/4'' ID spiral / Slick DC with 4" IF connections

DC                                           12 ea. 8” OD x 3'' ID spiral / slick DC with 6 5/8'' REG connections.
DC                                           3 ea 9 1/2'' OD x3'' ID slick type DC with 7 5/8'' REG connection
2.2 KELLY

Number, size and length                       2 ea. 5 1/4” OD, 40’ square kelly W/scabboard

2.3 SUBS
                                             8 ea 6 1/4'' lifting sub
                                             5 ea 8'' lifting sub
                                             2 ea 9 1/2'' lifting sub
                                             2 ea. 7 5/8” Reg-7 5/8” REG double box
                                             2 ea. 6 5/8” Reg-7 5/8” REG double box
Bit Subs
                                             2 ea. 6 5/8” Reg-6 5/8” Reg double box
                                             2 ea. 4 ½” Reg- 4" IF double box
                                             1 ea. Swivel sub: 6 5/8” Reg LH double pin connection.
                                             2 ea.7 5/8” REG pin-6 5/8” Reg box
Crossover Subs
                                             2 ea. 6 5/8” Reg pin-4 ½”IF box
                                             2 ea. 4 IF pin-4 ½”IF box
 Kelly Saver Subs                            2 ea. Kelly saver sub: 4 ½”IF box-4 ½”IF pin connection
3. BLOWOUT PREVENTERS
                                             13 5/8” x 5M Annular BOP
                                             13 5/8”x 5 M Double ram BOP
                                             2 ea. set 5” pipe rams, and (1) set blind /shear rams for above BOP’s,
Blowout Preventer stack:                     (1) set each pipe rams for the casing sizes 9 5/8”, 7


                                             1 ea.13 5/8"x5M Drilling spool


                                             KOOMEY MODEL T-20160-35 AC AC-35 Accumulator, 160 gallons
                                             capacity
Blowout Preventer Control Panel
                                             Triplex pump model TX-588 W/20 HP DC Motor.
                                             2 ea.KOOMEY 2 Stage model 2T-10, 000 psig air pump.



                                                            2
                                               3 1/16 10M psi WP choke manifold with one remote hydraulic choke
Choke Manifold
                                               complete with Kick master, one adjustable choke
HCR valve                                       2 ea 3 1/8" x 5m hydraulicly actuated valve
Cup Type Tester                                For 13 3/8''(68#/ft), 9 5/8''(47#/ft) and 7''(29 #/ft) casing
4. CONTROL VALVES
                                               2 ea   Inside BOP for 5” DP
Inside Blowout Preventers

                                               1 ea. Hydril upper valve 6 5/8”LH pin-box 10000 psi WP
Kelly cock
                                               2 ea. Hydril lower valve 4 ½”IF pin-box 10000 psi WP
5.0 FISHING EQUIPMENT
                                               1 ea.Bowen-150, 11 ¾” OD P/N C-12822 full strength overshot with
                                               grapples, extention and oversize guides.
                                               1.ea Bowen-150, 9 5/8” OD P/N 264 full strength overshot with
5.1 Overshots
                                               grapples, extention and oversize guides.
                                               1 ea. Bowen-150, 8 1/8” OD P/N C-5342 full strength overshot with
                                               grapples, extention and oversize guides.
                                               1 ea. Junk basket for 17 1/2-26" hole size
5.2 Junk Basket                                1 ea junk basket for 12 1/4" hole size
                                               1 ea junk basket for 8 1/2" hole size
5.3 Subs for Fishing Tools with Contractor’s
                                             Available
drill String
6.0 WIRELINE ASSEMBLY
a) Wire line Measuring assembly              Wireline unit W/0,092” wireline complete
7.0 HANDLING TOOLS
                                             2 ea. Slip for 5” OD DP
                                             2 ea. Baash-Ross DC slip size 4 ½”-7”
7.2 Drill Collar Slips                       2 ea. Baash-Ross DC slip size 6 5/8”-8 1/4”
                                             2 ea. Baash-Ross DC slip size 8 ½”-10”
                                             2 ea BJ or Varco type RGG 150 tons rated capacity for 3 1/2" DP
7.3 Drill pipe Elevators
                                             2 ea BJ or Varco type RG 350 tons rated capacity F/5” DP

7.4 Tongs for Drill pipe, casing and Tubing 2 ea. WOOLEY tongs W/4”-17” latch lug jaw assy.
                                            (1) Varco DC safety clamp size: 4 ½” – 7”
7.5 Drill Collar Safety Clamps              (1) Varco DC safety clamp size: 7 ½” – 8 5/8”
                                            (1) Varco DC safety clamp size: 9 ½” – 10 5/8”
                                            1 set. BJ type weldless elevator links 2 3/4” dia. X 120” long, 350 tons
7.6 Elevator Links                          capacity.

                                               (1) Bit breaker adaptor plate F/26” bit.
                                               (1) Bit breaker adaptor plate F/17 1/2” bit.
7.7 Bit Breakers
                                               (1) Bit breaker adaptor plate F/12 ¼” bit.
                                               (1) Bit breaker adaptor plate F/8 ½” bit.
8.0 MUD EQUIPMENT
                                               Shale shaker tank capacity 120 bbls. Settling tank capacity 420 bbls.2
                                               ea Suction tanks each capacity 420 bbls.2 ea storage tank each
8.1   Steel Mud Tanks                          capacity 320 bbls. Mixing tank capacity 420 bbls. Every tanks have
                                               bottom mud gun and mud agitators. One of the suction tanks has slug
                                               pit.
                                               Trip tank 50 bbl capacity. having 1-10” discharge and 10” flowline
8.2   Trip Tank
                                               connection.
                                               2 ea.BRANDT KING KOBRA shale shaker complete W/(3) Marathon 3
8.3   Shale Shakers
                                               HP electric motor. Capacity 1000 gpm.


                                               DERRICK model 3 IN 1, 2-10” cones skid mounted desander , 4" x 16
8.4    Desander+      mud   cleaner+   shale
                                               cones mud cleaner and shale shaker W/ 5”x6” mission type centrifugal
shaker
                                               pump and marathon electric motor complete. Capacity 1000 GPM.


                                               Swaco type degasser, oilfield skid mounted, with connections and 8”
                                               suction-discharge system complete W/Ingersol Rand model 225 type
8.5 Degasser ( Horizontal vacuum)
                                               30 vacuum pump, Mission type 6”x8” centrifugal pump and Celma
                                               electric motor. Capacity 1000 gpm.
8.6 Poor Boy De-gasser                         30'' OD
8.7 Hopper                                     2 ea 75 KW 6'' x8'' centrifuge
8.8 Mud Agitators                              2 ea 7,5 KW mud agitator for each tank.
8.9 Flow Nipple and Flow Line for BOP
                                      Available
Stack
8.9 Mud bucket                        OTECO model with end seal for 5'' DP

                                                              3
9.0 ELECTRIC GENERATING                  AND
LIGHTING SYSTEM
Diesel-electric generators                     2 ea CAT C-18 model , each power is 230-430 Volts, 50 Hz,700 KVA
  Vapour proof rig lighting system and
sufficient lighting for all work and camp yes
areas
                                           Hobart model M-300 arc welder W/all standard equipment and
Welding and Cutting Equipment
                                           electrical welding machine
10.0 CAMP EQUIPMENT
                                           Drilling Cotractor’s caravan as required
Sleeping      units   for   Company    and Office for Contractor(1 unit)
Contractor’s personnel

                                               one kitchen and service room for worker and service room for staff (2
Kitchen and restaurant
                                               units)
11.0 MISCELLANEOUS
11.1 Pipe Racks and Bins                       Available
11.2 Water Supply and Storage                  total capacity 600 bbl
11.3 Fuel Storage Tanks                        Available ( 76000 liters)
11.4 Transportation and Rig up Equipment Available
11.5 Cellar pumps                              Air driven or electrical driven pump
11.6 TOTCO                                     8º
11.7 Air winch                                 1 ea.UPETROM made 2,5 tons capacity,
11.8 Pipe spinner                              Pipe spinner for 2 7/8"-7" pipe size
11.9 high pressure        steam    cleaning
                                               1 ea cold and hot high pressure cleaning machine
machine
                                               2 ea. 2 C 10 mechanical drive compressor. Capacity 6 m3/hr, working
11.10 Air compressor
                                               pressure 150 psi
11.11 Inter communication system               yes
11.12 wind walls for rig and mud tanks         It will be provided
11.13 HSE materials                            HSE materials will be provided for Contractor's personnel


12.0 SAFETY SYSTEM


12.1 Dry Chemical Fire Extinguishers and 2 ea. 50 Kg Fire extinguisher
Other Safety Equipment as required by 5 ea. 12 Kg Fire extinguisher
Contractor’s Insurance Underwriter, Local 10 ea. 8 Kg Fire extinguisher
Custom and Regulations




                                                              4

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:191
posted:12/20/2010
language:English
pages:4