Docstoc

Wet Mopping Instructions

Document Sample
Wet Mopping Instructions Powered By Docstoc
					Wet Mopping Instructions

  1. Dust mop the floor using the dry cleaning
     procedures.
  2. Position wet floor signs.
  3. Always wear protective goggles and
     gloves when handling cleaning chemicals.
  4. Fill mop bucket with FLOOR CLEANER
     solution following directions on the product
     label.
  5. Start with a clean mop. Place mop into
     cleaning solution. Wring the mop lightly, it
     should be wet, but not dripping.
  6. Apply the FLOOR CLEANER solution to
     the area to be cleaned using a figure 8
     motion.
  7. Allow the solution to dwell for 3 to 5
     minutes.
  8. Using a clean wet mop and a bucket of
     clean water, apply a rinse to the floor and
     pick up with the mop head or wet vacuum.
     Change the rinse water when it becomes
     soiled.
  9. Clean all equipment and return to storage
     area.

Professional Maintenance Tips:

     Always wear Personal Protection
      Equipment (PPE).
     Use cool water when diluting products.
     Always add cleaner to water. Never water
      to cleaner.
     Use caution signs as floor surface may
      become extremely slippery.
     Use both sides of the mop. Turn the mop
      over, keep mop on the floor and gently fold
      over to avoid splashing walls, baseboards,
      carpet, etc.
     Change solution frequently. Dirty solution
      cannot clean the floor.
Damp Mop Instructions

   1. Dust mop the floor using the dry cleaning
      procedures.
   2. Position wet floor signs.
   3. Always wear protective goggles and
      gloves when handling cleaning chemicals.
   4. Fill mop bucket with FLOOR CLEANER
      solution following directions on the product
      label.
   5. Start with a clean mop. Place mop into
      cleaning solution. Wring the mop
      thoroughly, it should only be damp, not
      dripping.
   6. Damp mop an area approximately 10" x
      10", using a figure 8 motion. Leave the
      floor as dry as possible. This will speed the
      drying process and allow the floor open to
      traffic sooner.
   7. To prevent dirt from being re-deposited,
      change FLOOR CLEANER solution
      frequently.
   8. Clean all equipment and return to storage
      area.

Professional Maintenance Tips:
        Always wear Personal Protection Equipment (PPE).
        Use cool water when diluting products.
        Always add cleaner to water. Never water to cleaner.
        Use caution signs as floor surface may become extremely slippery.
        Use both sides of the mop. Turn the mop over, keep mop on the
          floor and gently fold over to avoid splashing walls, baseboards,
          carpet, etc.
        Change solution frequently. Dirty solution cannot clean the floor.

				
DOCUMENT INFO