ALLAHABAD BANK - DOC 13

Document Sample
ALLAHABAD BANK - DOC 13 Powered By Docstoc
					                                                ALLAHABAD BANK
                         SCHEDULE OF ITEMS SPECIFICATION AND QUANTITIES
                           FOR THE INTERIOR RENOVATION WORKS FOR THE
                               BRANCH OFFICE - BALIGORI
                                                FURNISHING WORK

     S/N            Description of Items                          Qty.    Unit   Rate (Rs.)     Amount(Rs.)


1. Supplying and erecting full height opaque partitions (up
   to 3000 mm. high) as per drawing and conforming to
   the following specifications:
   Basic frame work:
   Well seasoned Malaysian sal wood sections, 50x50 mm.
   treated with two coats of wood preservatives at max.600
   mm. horizontal and vertical spacing as per site conditions.
   Vertical members shall be suitably anchored at ceiling
   level to ensure rigidity.
   Skin membrane:
   1x6 mm. thick BWR grade plywood on each face. With
   4x4 mm. grooves formed at the top layer as per drawing/
   instructions.
   Finishing & Skirting :
   1 mm.thick laminate sheet of same or combination shades
   on the visible both faces and 100 mm. laminated skirting
   as per the drawing and instructions,
   Quoted rates shall include all necessary materials, access
   -ories and labour and also allow provisions for electrical/
   telephone / computer wiring conduits and switch boxes,
   etc. (Materials for wiring conduits and switch boxes shall
   be separately paid for.)                                       150    Sft

      For front side of strong room passage.
a)    -do- with both ply with two coats of paint with a coat of
      synthetic primer and others as per item no 1                 51 Sft.


   Manager room partition.
2. Supplying and erecting full height partly glazed partitions
   (up to 3000 mm. high) as per drawing and conforming to
   the following specifications:
   Basic frame work:
   Well seasoned Malaysian sal wood sections, 50x50 mm.
   treated with two coats of wood preservatives at max.600
   mm. horizontal and vertical spacing as per site conditions.
   Vertical members shall be suitably anchored at ceiling
   level to ensure rigidity.
   Exposed frame members in the glazed portions shall have
   wider spacing (approx 1200 mm. clear)as per instructions.
   Exposed members shall be finished with 1 mm. thick
   laminate sheet of same or combination shades, over 1x6
   mm. BWR grade plywood facing on each face including
   4 mm. grooves at location as per instruction /drawing.

                                                                                          F/1
                                                    ALLAHABAD BANK

 S/N             Description of Items                         Qty. Unit    Rate (Rs.)   Amount(Rs.)
   Contd. 2
   Skin membrane:
   Opaque portion up to 900 mm.from floor level and from
   1980 mm. to 3000 mm. from floor level with 1x6 mm.
   thick BWR grade plywood on each face with 4x4 mm
   grooves formed at the top as per drawing / instructions.
   Finishing & Skirting :
   1 mm thick laminate sheet of same or combination shades
   on the visible both faces on outside and inside upto false
   ceiling level and 100 mm. laminated skirting as per the
   drawing and instructions.
   Glazing:
    6 mm. thick clear float glass fixed with continuous with
    white or steam beech wood glazing beads of approved
    shape(finished 35 x 25 mm.) all round polished and coated
    with NC lacquer finish..
    Quoted rates shall include all necessary materials, access
    -ories and labour and also allow provisions for electrical/
    telephone / computer wiring conduits and switch boxes,
    etc. (Materials for wiring conduits and switch boxes shall
    be separately paid for.)                                     25 Sft.

   Cash covering partitions.
3. Supplying and erecting full height partly glazed partitions
   (up to 2210 mm. high) for cash counters inside & back
   portions as per drawing and conforming to the following
   specifications:
   Basic frame work:
   Well seasoned Malaysian sal wood sections approx 50 mm
   wide and 40 mm. depth with two coats of preservatives at
   max. 600 mm. horizontal and vertical spacing as per site
   conditions. Vertical members shall be suitably anchored
   at ceiling level to ensure rigidity.
   Exposed frame members in the glazed portions shall have
   wider spacing (approx 900 mm. clear) as per instructions.
   Exposed members shall be finished with 1 mm. thick
   laminate sheet of same or combination shades, over (1x6)
   mm. BWR grade plywood facing on each face including
   4x4 mm. grooves at location as per instruction /drawing.
   Skin membrane:
   Opaque portion up to 1143 mm. from floor level and from
   1980 mm. to 2120 mm. height with 1x6 mm. thick BWR
   grade plywood on each face .With 4x4 mm.grooves formed
   at the top layer as per drawing/instructions.
   Finishing :
   As per item No. 2 above.
   Skirting :
   As per item No. 2 above.
   Glazing:
   As per item No. 2 above.


    F/2
                                                    ALLAHABAD BANK

     S/N             Description of Items                               Qty. Unit   Rate(Rs.)   Amount(Rs.)
           Contd. 3
           Quoted rates shall include all necessary materials, access
           -ories and labour and also allow provisions for electrical /
           telephone / computer wiring conduits and switch boxes,
           etc. (Materials for wiring conduits and switch boxes shall
           be separately paid for.)                                     255 Sft.

        Low ht. partition near counter and UPS.
4.     Supplying and erecting low height opaque partitions
       (up to max 1200 mm. high) as per drawing and confor
       -ming to the following specifications for swing door.
       Basic frame work:
       As per item No. 1 above.
       Skin membrane:
        As per item No. 1 above.
        Finishing & Skirting :
        1 mm. thick laminate sheet of same or combination shades
        as per instructions with one swing door 900 mm. width
        fitted with Steel hinges & Aluminium socket bolts etc.
        Edge moulds:
        All free top/end surfaces shall have polished white or steam
        beech wood moulds of approved shape from 65 x 25 mm.
        with NC lacquer in mat finish.
        Quoted rates shall include all necessary materials, access
        -ories and labour and also allow provisions for electrical /
        telephone / computer wiring conduits and switch boxes,
        etc. (Materials for wiring conduits and switch boxes shall
        be separately paid for.)                                     48    Sft.

           Cash Counters.
5.         Providing and erecting in position Cash Work Station com
           -prising of clerical workstation of approx. size 1143 x 760x
           750 mm. inclusive of a 1143 mm. high, 350 mm. wide cust
           -omer writing top finished with 1mm .thick laminate sheet
           of approved shade including polished moulding wooden
           piece.
           The workstation shall be supported from the partition
           system and made of 19mm. thick BWR grade block board
           finished with 1 mm. thick laminate sheet including inner
           faces. Free edges shall have white or steam beach wood
           mouldings of half-round profile as per drawings and
           instructions.
           Each cash work station shall comprise of the following:
           Readymade keyboard drawer of engineering plastic(KD 575,
           P.M.T./ INNOFITT SYSTEMS or similar) and all necessary
           accessories, suitably suspended below table top :
           Drawer unit having readymade stationary drawer of engineer
           -ing plastic (SD 3036/ INNOFITT SYSTEMS or similar):
           Tea tray at top and wire-manager :
           Cash drawers with approved telescopic channels for drawer-
           slides,automatic locks (keys in duplicate)and other necessary
           hardware and accessories including satin finish S.S. handles

                                                                                       F/3
                                                    ALLAHABAD BANK

     S/N             Description of Items                                 Qty.     Unit   Rate(Rs.)         Amount(Rs.)

           Contd. 5
           of approved quality, readymade CPU holder with swivel
           facility (CPU HL SW / INNOFITT SYSTEMS or similar).
           The front side of the cash counters shall have 10 mm. thick
           clear float glass in two pieces at sides& 230 mm. width front
           Laminates at top inside and outside with polished white or
           steam beech wood glazing beads as per instructions and
           drawings all complete. Rate to include cost of preparing
           a dummy sample for final acceptance by the users.             9.5 Rft.

        Low ht. cabinet.
6.     Providing and erecting in position low height Storage
       cabinet made of 19 mm. thick BWR grade block board as
       per drawing including intermediate shelves lockable
       shutters etc. conforming to the following specifications :
       Shutter faces shall be finish with 1 mm. thick laminate
       sheet of same or combination shades as per instructions
        with polished white or stream beech wood (6 mm. thick)
        edge lippings. Inside faces will be painted with 2 or more
        coats of enamel paint over a coat of primer.
        Shutter will be hung by auto-closing hinges of “Ebco”
        or equivalent, Locks, Magnetic door catcher and satin
        finished S S. handles etc.(Payment shall be on the area of
        cabinet face).
        a) Maximum 400 mm. deep x upto 900 mm. height.             15            Sft.

           Entrance Door.
7.         Providing and fixing twin-stile entrance door made of 40
           mm. thick well seasoned white or steam beech wood of
           special design for top and bottom and Lock rails and side
           vertical stiles etc. 130 mm.& 100 mm width and open able
           portion with 8 mm. thick clear float glass, fitted on 100 x
           50 mm. polished Malaysian Sal wood frame, necessary
           hardware fixture of approved make and design, viz. appro
           -ved ISI heavy floor spring two nos.,brass flush bolt, locks
           with keys, Satin finish stainless steel decorative handle
           (Dorset or equivalent approx 300 mm. long) on both faces
           complete as per drawing and instructions. Wooden
           surface shall be polished in approved shade N.C. Lacquer
            in mat satin finish.                                            28 Sft.

       Paneling in wall for Customer space and Manager room.
8.     Wall paneling upto 1050mm high and wall paneling in
       manager room upto 2590 mm. high works as per drawing
       and conforming to the following specifications:
       Basic frame work:
       Well seasoned Malaysian sal wood sections, treated with
       coats of wood preservatives minimum 50 mm. x 25 mm.
       at suitable horizontal and vertical spacing not exceeding
       600 mm. c/c.

                                                                                                      F/4
                                                         ALLAHABAD BANK

  S/N             Description of Items                               Qty.   Unit    Rate(Rs.)     Amount(Rs.)

        Contd. 8
        Skin membrane:
        1x6 mm. thick BWR grade plywood with 4x4 mm. groov
        -es formed at the top layer as per drawing / instructions.
        Finishing & Skirting :
        1 mm. thick laminate sheet of same or combination shades
        as per instructions with 40 x 40 mm. molded polished
        bead at top. Quoted rates shall include all necessary mater-
        ials, accessories and labor and allow provisions for electrical
        / telephone / computer wiring conduits and switch boxes,
        etc. complete with necessary jacking/ thickening of panels
        to accommodate conduits / switch boxes. (Materials for
        wiring conduits and switch boxes shall be separately paid
        for.)                                                          355 Sft.

 9.      Providing and fixing polished wooden molding ( out of
        65 x 65 mm. sections ) at junctions of false ceiling and
        walls and at other locations including NC lacquer finish. 150 Rft.

        Cash cabin doors
10.     Supplying and fixing in position overall 37 mm.thick solid
        core hot pressed phenol formaldehyde bonded flush door
        shutter (ISI)with Malaysian Salwood scanting to doorframe
        size (65 x 50)mm. for cash, finished with 1 mm. thick lami-
        nate sheet of approved shade and quality on both sides of
        the door shutter and visible faces of door frame with 4 mm.
        grooves including cost of hardware fitting e.g. night locks,
        steel hinges, door handles etc. of approved make quality
        all complete as per drawing / direction.                     43     Sft.

        Manager room and others.
11.     Supplying and fixing in position 37 mm. thick solid core
        hot pressed phenol formaldehyde bonded flush door shutter
        of (ISI) make with Malaysian Salwood scanting to door
        frame size (65 x 50) mm. finished up to 900 mm.from floor
        level with 1mm.thick laminate sheet of approved shade and
        quality on both sides of the door shutter and visible faces of
        door frame with 4 mm. grooves.
        The upper portion of the shutter is to be provided with 6
        mm. thick clear float glass fixed with white or steam beech
        wood glazing beads of approved design , complete as per
        drawing.Rate to include cost of hardware fitting e.g. mortice
        locks,brass hinges, approved ISI door closer,door handles etc.
        of approved make and quality.The exposed timber surface
        are to be polished in approved colour and finished the
        same with N.C. lacquer in mat satin finish.                    78    Sft.



                                                                                            F/5
                                                   ALLAHABAD BANK

      S/N             Description of Items                            Qty.   Unit   Rate(Rs.)   Amount(Rs.)


        Manager Table.
12.     Providing and erecting in position, freestanding table as
        per drawing and conforming to the following specifications:
        basic structure of 19mm. thick BWR grade block board for
        sides, top and modesty panel, finished with 1 mm. thick
        laminate sheet of approved shade and make including
        inner faces
        Drawer- cum- cabinet unit of approximate overall size of
        400 x 500 x 600 mm.(w x d x h) of 19 mm. thick BWR grade
        block and 12/6 mm. thick BWR grade plywood. The drawer
        unit shall comprise of one tea-tray, one readymade stationary
        drawer of engineering plastic (SD 3036/ INNOFITT SYSTE
        MS or similar) and one cabinet with inner faces polished
        in approved shade. The drawer unit shall be finished with 1
        mm. thick laminate sheet of approved shade including
        inner faces of cabinet shutters.
        Readymade keyboard drawer of engineering plastic
        (KD 575 P.M.T./ INNOFITT SYSTEMS or similar) and
        all necessary accessories, suitably suspended below table top;
        Readymade CPU holder with swivel facility (CPUHL SW
        / INNOFITT SYSTEMS or similar).
        Quoted rates shall also include cost of polished white or
        steam beech wood moulding(finished 40 x 20 mm. section)
        to edges of table top, polished white or steam beech wood
        lipping (6 mm. thick) to free edges of block board / ply-
        wood surfaces, approved drawer-slides,concealed type auto-
        closing shutter hinges and locks with keys in duplicate; other
        necessary hardware and accessories including satin finish
        S. S. handles, knobs and wire-managers etc. of approved
        quality.
        a) Approx. size of 1500 x 750 x 750 mm.                        1     Each

            Server room table.
13.         Supplying & erecting running server table 600 mm. deep
            and 750 mm. high including drawer-cum-cabinet unit for
            files, space for CPU or computer modesty panel, tea tray
            etc. made with 19 mm. thick phenol formaldehyde bonded
            block board on top and supporting sides with finished on
            top and sides with 1 mm. thick laminate of approved shade
            and quality fixing 450 mm. long powder coated steel key
            board tray (with mouse tray) of approved shade. Work shall
            include 3 sets of drawer units readymade Keyboard drawer
            and CPU holders similar to that of other workstations of
            previous items including finishing, hardware and accessor-
            ies at each of the work station. The key board is to be
            suspended from the table top, all complete as per direction




            F/6
                                                    ALLAHABAD BANK

 S/N                   Description of Items                           Qty. Unit   Rate(Rs.)   Amount(Rs.)

       Contd. 13
       All exposed edges of block board are to be provided with
       half round teak wood moldings, duly polished. Inner faces of
       wooden / block board surfaces are to be finished with mini-
       mum two coats of synthetic enamel paint of approved
       shade and quality over a coat of approved primer and
       all complete as per design / instruction.
       Rate to include charges for brass hardware fillings as well
       as fixtures like sliding gear for drawers of “Earl Behari”
       of similar approved make and Cable Manager.                  6 Rft.

       Low ht. Computer counter.
14.    Supplying & erecting low height computer running coun-
       ter semi-curve type approx. size 1200x750x740 mm.with
       writing top made with 19mm. thick BWR grade block
       board finished with1mm thick laminate of approved shade
       including polished wooden moulding piece with groove.
       Basic frame work:
       Well seasoned Malaysian sal wood sections, 40 x 40 mm.
       treated with coats of wood preservatives at max.400 mm.
       horizontal and vertical spacing as per site condition.
       Skin membrane:
       2 x 4mm thick BWR grade plywood on each face with
       4 x 4 mm. grooves formed at the top layer as per
       drawing / instructions.
       Finishing & skirting:
       1mm thick laminate sheet of same or combination shades
       as per instructions on visible both faces. Readymade key
       board drawer (KD575 P.M.T./ Innofitt systems or similar)
       and all necessary accessories, suitably suspended below
       table top.Drawer unit having readymade stationary drawer
       of engineering plastic (SD 3036 / Innofitt systems or
       similar) and tea tray at top with wire-manager. Drawers
       units with approved telescopic channels for drawer slides,
       automatic locks (keys in duplicate) and necessary hardw-
       are and accessories including satin finish S.S. handles of
       approved quality, readymade CPU holder with swivel faci-
       lity(CPU HL SW/ INNOFITT System or similar) all comp-
       lete as per design and instructions.                       13      Rft.

       For top of low ht. running counter table
15.    Providing & erecting 10 mm. thick Bronze glass 30 cm.
       height with machine polished & round edges at top
       fitted with stainless steel clips on 60x60 mm. size teak or
       white steam beech wood round or square polished posts
       upto 1200 mm. c/c or smaller division required as per
       site condition fitted on low height Computer Counter top
       and all complete as per design and instruction.               13   Rft



       F/7
                                                      ALLAHABAD BANK

 S/N                  Description of Items                        Qty. Unit    Rate(Rs.)   Amount(Rs.)

       False Ceiling.
16.    Providing and fixing in position dropped ceiling in two
       levels if necessary including vertical surface in between
       two level of ceiling surface with 12.5 mm. thick tapered
       edge Gypsum board conforming to IS : 2095 including
       providing and fixing of frame work made of special
       sections power pressed from M. S. sheet and galvanized
       in accordance with zinc coating 600 as per IS 277 and
       consisting of angle cleats of size 25 mm. wide x 16 mm.
       thick with flanges of 22 mm. and 37 mm. at 1200 mm.
       centre to centre one flange fixed to the ceiling with dash
       fasteners 12.5 mm. dia x 40 mm. long with 6 mm dia bolts
       to the angle hangers of 25 x 25 x 5 mm. of required
       length, and other end of angle hanger being fixed with
       nut and bolts to G.I. channels 45 mm. x 15 mm. x 0.9mm
       running at the rate of 1200 mm. centre to which the ceil
       -ing section 0.5 mm thick bottom wedge of 80 mm. with
        tapered flanges of 26 mm. each having clips of 10.5 mm
        at 450 mm. centre to centre shall be fixed in a direction
        perpendicular to G.I.channel with connecting clips made
        out of 2.64 mm. dia x 30 mm. long G.I.wire at every
        section and perimeter channel all to be done in any floor.
        The perimeter of ceiling fixed to wall / partition with the
        help of rawl plugs at 450 mm. centre to centre with 25
        mm. long drive all screws @ 230 mm. interval including
        joining and fixing to a flush finish of tapered and square
        edges of the M.R. gypsum board with recommended
        jointing compound, joint paper tape, finisher and two
       coats of drywall top coat suitable for gypboard including
       the cost of making openings for light fittings, grills, diffu-
       sers, cut outs made with frames suitably fixed all comp-
       lete as per drawing and specification and direction but ex-
       cluding the cost of painting. (Manufactures specifications
       are to be followed). Rates to include cost of making
       openings and extra framing for ceiling mounted electri-
       cal / air conditioning accessories etc. as per instruction. 550 Sft.

       Aluminium grill for cash front and top.
 17.   Providing & fixing anodized aluminum grill of appro
       -ved design of APEX or similar approved make to
       the front & top of cash counters fitted with 35 x 25 mm.
       polished white or steam beech wood beads of approved
       shape and all complete as per design and direction.        110   Sft.

 18. Providing & fixing display notice board of size 750 x 600
     mm. approx. made of 12 mm. thick perforated / soft
     board cladded with fabric of approved shade and quality
     backed with 6 mm. ply and all side fitted with 40 x 25
     mm. size white or steam beech wood polished frame
     all complete as per direction ( Fabric shall be approx.
     Rs. 150/- per meter).                                     5 Sft.
                                                                                           F/8
                                                      ALLAHABAD BANK

      S/N                 Description of Items                              Qty.    Unit         Rate(Rs.)         Amount(Rs.)

            Side cabinet for tables.
 19.        Supplying and erecting in position side / back cabinet
            units with sliding shutters of approx. size 400 mm. deep
            x 750 mm. high made of 19 mm thick BWR grade block
            boards including intermediate shelves as per design and
            instructions. Exposed block board surfaces shall be finish-
            ed with 1mmlaminate sheet of approved shade and make.
            Inner faces of sliding shutters shall be polished with1mm
            laminate sheet of approved shade and in approved color.
            Free edges of block board shall polished white or steam
            beech wood half round moulds (out of 20 x 20 mm sect-
            ions.Inner faces of cabinet shall be polished in approved
            shade. Quoted rates shall include cost of necessary hard-
            ware, viz. handles locks keys in duplicate etc.             3   Rft.

20.         Providing & fixing Customers‟ writing top of size 450
            x 300 mm. made of 12 mm. thick BWR ply finished
            with 1 mm. thick laminated sheet to be fitted on Low
            height partition or Column / wall with decorative
            wrought iron brackets of suitable size and quality.        1 Each

            Wall / column surface textures.
21.         Providing and fixing best Heritage surface textures on
            the wall column and other surfaces of any height with
            approved mixed colors „Natural‟ spray coat (B) or simi-
            lar approved of Bakelite Hylam over coat of cement
            primer and all complete as directed.                       515 Sft.

            Customer seating.
22.         Supplying and placing black powder coated with perfo-
            rated tandem combined multi three seater of approved
            type and brand with seat, back, and arm rest complete.      1   Set.

23.         Covering the electric panel box by providing and fixing
            19mm. thick BWR block board upto 350 mm. depth and
            door at front with compartments as necessary finished
            with 1mm. thick laminate with brass hinges, S.S. door
            handles, locks and all complete as per direction.          16 Sft.

            For false ceiling.
 24.        Painting the false ceiling with plastic emulsion paint in
            two or more coats of approved brand and colors over coat
            of cement primer using roller brush for smooth finish
            including sand papering in intermediate coats using putty,
            p-o-p. etc. and all complete as directed.                  550       Sft.




                                                                                                             F/9
                                                 ALLAHABAD BANK

 S/N                Description of Items                          Qty.   Unit        Rate(Rs.)     Amount(Rs.)

    Re-laminating the existing table.
25. Re-laminating the existing laminated surface for table
    top cupboard etc. with laminates of approved brand and
    colors over 4 mm ply of approved brand and covering
    the back and sides with 12mm. ply finished with lami-
    nates and providing one laminated key operating tray
    of 12mm ply finished with laminate fitted with approved
    brand telescopic sliding channel and CPU holder with
    swivel/ castors of “Ebco” make fitted and finished with
    polishing and painting and all complete as per design
    and direction.
    a)     Table size 1370 x750 x 750 mm.                   1 Each.


26.   Credit value: (-) For dismantling and removing the exis-
      ting and not usable the old counters, partitions, damaged
      ply, glass etc. and taking out from the premises as per
      the direction of the Manager.                             1 Lot.   L.S. (-)



                                                                                          ___________________
                                                                                    Total Rs.




       Dated :
                                                     __________________________
       Place :                                       Signature of Agency with Seal.




                                                                                            F/10
                                        ALLAHABAD BANK


           APPROVED MATRERIALS FOR INTERIOR AND FURNITURE WORKS.




                       MATERIALS                          BRAND / MANUFACTURER
SL

NO.
               BWR grade block board, ply                  Century, Green, Kit Gold.
1.            Board, and flush door shutter
                        (ISI)
                     Laminates (ISI)                        1MM. thick Formica make
2.                                                       (sample no. E- 225 / 1225 and
                                                      CG-305 / 1305) or equivalent approved.
                Vitrified Ceramic floor Tiles          Naveen, Diamontile, Marbonite, or
3.                                                            equivalent approved
                Ceramic floor and wall tiles               Kajaria Plus, Bell Ceramics,
4.                                                           Somany, Johnson, Nitco
                         Glazing                       Modifloat, St. Gobain, Asahi India
5.
                   Synthetic enamel paint                  „Luxol Higloss,‟(Berger),
6.                                                     „Dulux Velvet Touch Enamel‟ (ICI)

                  Acrylic Emulsion Paint                  „Dulux Velvet Touch „ (ICI)
7.                                                     „Royale Luxary Acrylic Emulsion
                                                                (Asian Paints)
               Gypsum Board false Ceiling.                      India Gypsum Ltd.
8.
                 Cabinet / Drawer Locks,              Godrej or approved Efficient Gadgets.
9.             Drawer slides, auto hinges, etc.                     Ebco.
                   Key board trays etc.                      INNOFITT Systems.
                 Door locks, handles etc.                    Dorset, Acme, Godrej.
10.



Dated. :

Place. :




                                                  _____________________________
                                                   Signature of Agency with Seal.
                                                    ALLAHABAD BANK
                                SCHEDULE OF ITEMS SPECIFICATIONS AND QUANTITIES
                                   FOR THE INTERIOR RENOVATION WORKS IN THE
                                            BRANCH OFFICE - BALIGORI
                                               ELECTRICAL WORK

     S/N            Description of items                        Qty. Unit           Rate (Rs.)   Amount(Rs.)

1.         Supply installation & commissioning of 63 Amp
           TPN SFU in a steel enclosure having HRC fuse
           link on suitable flat iron frame.             1             No.

2.         Supply installation and commissioning of 415 volts
           63 Amp. 4 pole Isolator & 6nos.32 Amp. SP MCB
           along with necessary neutral link and all interconne-
           ctions with wire etc. complete.                       1         No.

           For L & F Distribution.
3.         Supply installation and commissioning of 8 way
           SPN DB having 1 no. 40 Amp. DP MCB Isolator
           & 6 nos. 6/10 Amp. SP MCB along with necessary
           neutral link and all interconnections etc. complete. 1     No.

           For computer Distribution.
4.         Supply installation and commissioning of 8 way
           SPN DB having 1 no. 40 Amp. DP MCB isolator
           and 6 nos. 2 to 5 Amps. SP MCB along with
           necessary neutral link and all connections etc.
           complete for computer distribution board.       1          No.

           For UPS Line.
5.         Supplying and installation and commissioning of foll-
           owing wall mounted DB with socket and matching plug,
           for UPS incoming and outgoing ,with controlling MCB
           in steel enclosures (company manufactured) 32 Amps 5
           pin industrial socket and matching plug and 32 Amps
           SPN controlling MCB.                                  2 Each.

           For UPS position Line and L & F Line.
6.         Supplying and laying wiring by 1.1 KV grade 2 x 4 Sq.
           mm. and 1 x 2.5 Sq. mm. PVC insulated copper cable in
           PVC rigid pipe /casing of suitable size to be laid on wall
           surface / false ceiling including drop conceal for UPS
           incoming and outgoing and all complete as directed.        40     Mtr.

       For new A.C. Line.
7.     A.C. power point wiring from DB with 1100 volt grade 2
       nos. single core 4 sq. mm.+ 1 no. 2.5 sq. mm.(green color
       for earthing ) PVC insulated flexible FRLS copper condu-
       ctor cable through suitable size rigid pvc conduit (ISI mar-
       ked) complete with junction box, circular box, elbows, etc
       and other accessories on surface above false ceiling or
       concealed by chase cutting on wall complete with North-

                                                                                       E/l-1
                                           ALLAHABAD BANK

 S/N                  Description of items                             Qty. Unit   Rate(Rs.)   Amount(Rs.)

      Contd. 7
      west make 25 A socket, 25 A starter, m.s. box, bakelite
      cover all complete with interconnection, mending good
      all damages to original finish, painting etc. as required.
      All connections of wires to be done by means of „Wago‟
      type connectors.                                           3 Each.

 8. Supply and installation of point wiring for light / fan
    by 3 x 1.5 sq. mm. of 1100 volts grade PVC insulated
    copper cable including circuit wiring by 2 x 2.5 sq. mm.
    and 1 x 1.5 sq. mm. of 1100 volts grade PVC insulated
    copper cable in PVC rigid pipe / casing of suitable size
    to be laid on wall surface / false ceiling including drop
    conceal ( depending on the position of work site ) with
    necessary items such as switch, JB, circular box, switch,
    board etc and all complete.
    a) Two points controlled by one switch..                  11 Nos.
    b) One point controlled by one switch.                    15 Nos.

9.     –Do- -do- as per item 8 above with earthing attach-
       ment in 3 x 1.5 sq. mm.copper wire along with 6A plug
       socket & control switch all complete.                 4       Nos.

       For Raw Power Line in Counters.
10.    –Do - -do- as per item 8 above for 3 x 6 A socket
       outlet with each individual switch on work stations
       with m.s. box, bakelite cover etc. all complete as per
       direction.                                             4 Each.

     For Computer Line in work stations.
11 . Computer socket outlet cluster point wiring with 1100 V
     grade 2 x 2.5 sq. mm. and 1x1.5 sq. mm. PVC insulated
     flexible FRLS copper cable through suitable size rigid pvc
     pipe / casing of suitable size to be laid on wall surface
     through concealed in wall /embedded in floor, partly on
     surface above false ceiling etc. from DB to computer
     socket outlet and upto two nos. socket clusters on one
     circuit connecting by looping method, complete with
     supply and installation as follows.

       a) For 3 nos.16 A 6 pin plug sockets and 3 nos.16 A
       switches, bakelite top cover and M. S . box / PVC
       board with cover and all complete.                     1     Nos.

       b) For 3 nos. 6 A 5 pin plug sockets and 3 nos. 6 A
       switches, bakelite top cover and M. S. box / PVC
       board with cover and all complete.                         7 Nos.




                                                                                     E/l-2
                                                      ALLAHABAD BANK

 S/N                  Description of items                          Qty.    Unit   Rate(Rs.)           Amount(Rs.)

        Computer Earthing.
 12.    Computer earthing installation as per I.E. rules confor-
        ming to IS: 3043-1987 or its latest amendment by mak-
        ing earth station with 600mm. x 600mm. x 6mm.(mini-
        mum) thick copper plate electrode to be installed such
        that its top edge shall be at a minimum depth of 3.0
        metre below ground level after preparation of ground
        with charcoal and salt and connecting the earth lead-in-
        wire by bolting and then brazing to the copper plate
        complete with copper bolts of suitable length double
        nuts and washers, copper lugs including supply and
        fixing of 50mm.dia. partly perforated G.I. pipe with fun-
        nel for watering arrangement The wire of 2 x 16 Sq.
        mm. PVC insulated copper wire through suitable size
        PVC conduit to be fixed on wall surface with bar / sad-
        dles at an interval of 300 mm. etc. as required to be
        completed in all respect. The under ground portion of
        earth lead-in-wire to be laid at an average depth of 500
        mm. below ground level.The earthing station should be
        provided with 300mm. x 300 mm. and 300 mm. depth
        inside dimension masonry inspection pit with C. I.
        hinged cover having locking arrangement and restoring
        the surfaces duly rammed.                                 1        Each.

       Call bell for Manager room.
13.     Supplying and fixing on wall call bell buzzer (approved)
       suitable for 230 volt single phase A.C. supply including
       Interconnection, etc. as required.                        1         Each.

       Telephone Socket.
14.    Supply and fixing on wall / furniture / partition recessed
       type telephone socket outlet ( RJ-11) with mounting box
       and front plate including cutting chase mending good
       damages all complete as required.                              2    Each.

     For Telephone Cable.
 15. Supplying and laying of 2-pair 0.61 mm. dia. PVC insula-
     ted telephone cables through concealed / on surface rigid
     PVC conduit / casing from telephone junction box to
     Telephone socket outlet including interconnection and
     mending good damages to be completed in all respect.      15 Mtr.


16.     Fixing box / round type single / double CFL / fluorescent
        light fittings etc. and others as necessary all complete with
        wires and all accessories.                                    28 Each.


 17.   Fixing ceiling / bracket / exhaust fan on wall, ceiling etc.
       complete with wires and all accessories.                           5 Nos.

                                                                                               E/l-3
                                             ALLAHABAD BANK

S/N                   Description of items                          Qty    Unit          Rate(Rs.)           Amount(Rs.)

18.    Dismantling and making temporary electrical connections
       for counters, tables and others as necessary time to time
       with wire for making the branch running and all complete. 1         L.S.

19.     Credit value :- ( - )
       Dismantling the existing old wiring, main switch, M.C.B.
       etc. which are not usable / and not in working condition
       may be taken out from the premises as per the direction of
       the Manager.                                                  1     Lot.           L.S. (-)




                                                                                                ___________________
                                                                                  Total Rs.



      Dated. :

      Place. :

                                                                          _____________________________
                                                                          Signature of Agency with Seal.
                                                                              E/l-4




                                   ALLAHABAD BANK


                                   APPROVED MATERIALS



1.         MCB                                        :         MDS, Standard, Havells.

2.         SPN MCB DB                                 :         MDS, Standard, Havells.

3.         TPN MCB DB                                 :         MDS, Standard, Havells.

4.         SWITCH FUSE UNIT.                          :         Siemens, Havells, L&T

5.         ALLUMINIUM CABLES (ISI).                   :         Nicco, Crystal, Havells

6.         PVC WIRE (ISI)                             :         Finolex FRLS, Havells.

7.         SWITCH, SOCKET, INDICATOR, FUSE ETC. (ISI) :         Anchor.

8.         MODULAR SWITCH (ISI)                       :         Roma, Crabtree, M.K.

9.         STARTER                                    :         North West.

10.        RIGID CONDUIT PVC PIPE (ISI)               :         Harsh (India), Prestolite.

11.        RJ – 45                                    :         HCL




Dated. :

Place. :

                                                      _____________________________
                                                          Signature of Agency with Seal.
                                       ALLAHABAD BANK

                      SCHEDULE OF ITEMS SPECIFICATION AND QUANTITIES
                        FOR THE INTERIOR RENOVATION WORKS FOR THE
                                 BRANCH OFFICE - BALIGORI
                              CIVIL WITH SANITARY AND PLUMBING WORK

S/N                Description of Items                         Qty. Unit     Rate (Rs.)       Amount(Rs.)

1.    75 mm thick brick work with 1st class bricks in cement
       mortar (4:1) in any floor using H.B. netting in every
      alternate layer with necessary chipping the existing
      floor / bonding with existing, curing with sand cement
      plaster (6:1) on both faces and all complete as directed. 45     Sft.

2.    -do- -do- 125 mm thick brick work and others as above
       item no.1 complete.                                  70 Sft.

      For existing walls.
3.    Stripping of worn out or damaged plaster and raking
      out joints in wall ceiling etc. in any height and any
      floor including removing rubbish from the compound
      in conformity with local municipal regulations.         150    Sft.

4.     Plaster to wall floor ceiling with 19mm. thick plaster
      with (6:1) sand cement mortar matching with the exist-
      ing surface, in any floor, and all complete as directed. 100   Sft                   .

5.    -do- -do- plaster 12mm thick plaster with (6:1) sand
      cement mortar and others as above.                       50    Sft.

6.    Rendering the surface of wall, ceiling etc. with plaster-
      of-paris (Thickness not less than 1.5 mm.)with smooth
      finish in old or new wall and all complete as directed. 150 Sft.

7.    Painting with cement primer of approved brand on tim-
      bers / plastered / steel etc. surfaces including smoothen-
      ing surfaces by sand papering and using putty and all
      complete as directed.                                      3100 Sft.

      For existing walls.
8.    Painting the wall, ceiling etc. with acrylic washable
      distemper of approved brand and colors in any surface
      in two or more coats using roller brush for smooth finish
      including sand papering in intermediate coats using
      putty, pop, etc. and all complete as directed.            2600 Sft.

      For doors and windows.
9.    Painting the wooden and other metal/wall surfaces with
      hi-gloss synthetic or lusture finish enamel paint of app-
      roved brand and colors in two or more coats including
      sand papering and smoothening surfaces and cleaning
      the glass panes and all complete as directed.             500 Sft.

                                               C/1
                                               ALLAHABAD BANK

S/N              Description of Items                                   Qty. Unit       Rate(Rs).   Amount(Rs.)

10.   Providing and fixing glazed/ceramic tiles (200x 300) mm.
      size Johnson / similar approved brand of standard quality
      any design and color in wall, dado etc. in any floor and
      height set in cement mortar (4:1) using white cement
      & pigment including fixing key stone with approved adh-
      esive and all complete as per direction.                     25 Sft.

      For Banking space.
11.   Providing fitting and fixing floor ceramic tiles of standard
      quality, matt finished, joint free of 400 x 400 mm size, of
      approved design and color(s) to floor and dado fixed to the
      existing floor with the chemical adhesive “fevimate” of pidi-
      lite or similar approved adhesive of adequate thickness to
      suit the required level including chipping and preparing
      the existing surface, as necessary, with supply of requisite
      materials, including taking out old vinyl flooring, if any, all
      complete as per design and direction.                           730        Sft.

12.    Providing, fitting and fixing polished black granite slab
       for kitchen top and front face with rounding the edges,
       to be fitted on newly supplied 40 mm. thick black stone
       to be placed on brick wall with sand cement mortar (4:1)
      partition 2.5ft height., and all complete as per design and
       direction                                                  10     Sft.

13.   Providing and fixing stainless steel kitchen sink best appro-
      ved quality approx size 450 x 400 mm and 1 mm. thick
      with necessary C.P. cock, waste, waste pipe etc. and all
      complete with necessary brackets.                             1           Each.

14.   Supplying fitting and fixing open able steel windows with
      side hung shutters conforming to IS 1038-1975 and manu-
      factured from rolled steel sections conforming to IS 7452-
      1974 with non friction projecting type, box type hinges,
      glazing clips, lugs locking bracket steel handles, with
      plate etc. including hoisting in position, fixing lugs in c.c.
      (1:2:4) with stone chips and cutting holes and mending good
      damages to match with the existing surface including best
      Indian approved sheet 3 mm thick glass panes fitted with
      glazing clips, putty complete in all respect.                  24 Sft.

15.   Painting the external wall surface with decorative cement
      based paint of approved brand two coats of combination sha-
      des after preparing surface including scraping the surface
      thoroughly on plastered or concrete surface and all complete. 450 Sft.

      Sanitary and Plumbing work in Toilet.
16.   Dismantling the existing cement concrete APS/ mosaic
      floor & wall tiles etc after opening the porcelain goods
      with fitting, G.I. pipes etc. carefully & removing the rub-
      bish outside the compound in conformity with local Muni-
      cipal regulations.                                          350     Sft.
                                                                                  C/2
                                            ALLAHABAD BANK

S/N              Description of Items                                   Qty. Unit     Rate(Rs).   Amount(Rs.)

17.   Providing and fixing glazed/ceramic tiles (200 x 300) mm.
      size Johnson or similar approved brand of standard qual-
      ity any design and color in wall, dado etc. in any floor and
      height set in cement mortar (4:1) using white cement &
      pigment including fixing key stone with approved adhe-
      sive and all complete as per direction.                           245 Sft.

18.   Providing and fixing floor tiles of standard quality in floor,
      wall (matt finish/Antiskid) of size 300x300 mm of appd.
      brand and color Johnson or similar approved brand set in
      cement mortar (2:1) including leveling course in same mor-
      tar using white cement and pigment etc. including chipping
      the floor and all complete as per direction.                          80 Sft.

19.   Providing and fixing G.I. pipe “TATA” medium quality
      with all G.I. specials, L/screw, fitting etc. (ISI) in wall
      floor etc .in concealed way including cutting grooves
      in wall, floor, etc. and mending damages including a
      protective coat of paint all complete as per direction
      20 mm dia. pipe.                                                 12    Rft.

20.   Do   Do    with 15 mm. dia pipe.                                 45    Rft.

21.   Do Do with 40 mm. dia PVC pipe of approved quantity. 10                Rft.

22.   Providing and fixing 20mm. dia peets valve full way
      Gun metal of appvd. brand with ISI mark and complete.             1 Each.

23.   Providing and fixing 15 mm. dia CP concealed angular
      stop cock, bibcock, pillar cock etc. of ESSCO Deluxe
      model or similar approved brand and design all complete. 4 Each

24.   Providing and fixing E.P.W.C. „P‟ or „S‟ trap in white
      glazed ware of Hindware / Parryware fitted with C.P.
      nut \ bolts \ screws with closet seat white with lid
      and CP hinges C.P. cock etc. and Reliance white PVC
      cistern with PVC connecting pipe & complete in all
      respect.                                                              2 Each

25.   Providing and fixing squatting plate with integral flushing
      in white vitreous ware with approved CP „ESSCO‟ cock
      fitted with cc, Size 600 x 350 mm. and all complete.        1 Each.

26.   Flat back Urinal small size Hindware / Parryware fitted
      with brass screws etc. and all completed with CP angu-
      lar cock, pvc waste with pipe, brackets all complete. Urinal
      size 470 x 300 x 265 mm.                                              1 Each

27.   Providing and fixing white wash Basin Hindware / Parry-
      ware 550 x 400 mm. size with CI. Bracket CP waste fitti-
      ngs, CP ESSCO pillar cock approved type CP stop cock,
      PVC waste pipe etc. all complete as directed.                         1 Each
                                                                               C/3
                                        ALLAHABAD BANK

S/N             Description of Items                            Qty. Unit         Rate(Rs).         Amount(Rs.)


28.   Providing and fixing mirror beveled edges 5.5 mm. thick
      & size 450 x 300 and all complete                          1 Each

29.   Providing and fixing CP liquid soap holder of approved
      design.                                                    1 Each
                                                                              ___________________
                                                                             Total Rs.




      Dated :



      Place :




                                     _________________________
                                     Signature of Agency with Seal.




                                                                            C/4
                                                       ALLAHABAD BANK



                                     APPROVED MATERIALS TO BE USED


1.        Matt / Anti Skid tiles. (Vitrified, joint free, etc.) :   Johnson (Marbonite), Spartek, Kajaria.

2.        Wall tiles.                                           :   Johnson, Spartek, Kajaria.

3.        Painting (Primer, Hi-gloss, Lusture finish).          :   Asian, Berger, ICI.

4.        Painting (External).                                  :   Asian(Apex), Berger(weather Coat Optima).

5.        Glass.                                                :   Modi Float, Saint Gobin.

6.        Adhesive (Floor).                                     :   Sika Tilofix /F, Fevimate, Bal-endura.

7.        Soilpipe and Fittings (ISI).                          :   ISI-1729/1964 (ISI) approved brand.

8.        Porcelain Goods.                                      :   Hindware, Parryware.

9.        G. I. Pipes.                                          :   Tata Medium(ISI).

10.       C. P. Cocks.                                          :   CP Essco (Deluxe).

11.       Peets Valve.                                          :   Approved ISI Brand (Heavy).

12.       Adhesive Wall.                                        :   Sika Tilofix, Fevimate. or similar approved brand.




Dated :
                                                                    ___________________________
Place :                                                             Signature of Agency with Seal.

				
DOCUMENT INFO