hse2421_en by msds

VIEWS: 2 PAGES: 4

									® Hilti (Canada) Corporation MATERIAL SAFETY DATA SHEET Product identifier: Description / use: Supplier: Originator Emergency number: HSE 2421 High Strength Epoxy Part A / High strength epoxy for concrete and doweling applications

MSDS No.: Revision No.: Prep. Date: Page:

840C 004 01-18 -2006 1 of 2

Hilti (Canada) Corporation, 6790 Century Avenue, Suite #300, Mississauga, Ontario L5N 2V8 Hilti, Inc., P. O. Box 21148, Tulsa, Oklahoma, USA 74121 Chem-Trec: 1 800 424 9300 INGREDIENTS INFORMATION

Ingredients (Part A; i.e. large tube) Epoxy resin Processed silica Polyglycol glycidyl ether copolymer ** Titanium dioxide Phyllosilicate ** Ethylene glycol Fumed silica

CAS Number 25065-99-8 14808-60-7 Proprietary ** 13463-67-7 Proprietary ** 00107-21-1 07631-86-9

% (wt.) 50 - 70 20 - 40 05 - 10 01 - 05 <2 <1 <1

LC50, (rat) N/Av N/Av N/Av N/Av N/Av N/Av N/Av

LD50 (rat) N/Av N/Av N/Av N/Av N/Av 4,700 mg/kg 5,000 mg/kg

TLV (mg/m3) N/E N/Ap / 0.05 N/E N/Ap / 10 N/E N/E N/Av

STEL (mg/m3) N/Av N/Av N/Av N/Av N/Av N/Ap/C:100 (A) N/Av

** HMIRC registration number 4653: 10 December, 1999 PHYSICAL PROPERTIES Appearance / Physical state: Specific gravity (at 20ºC): Vapour pressure (at 20ºC): Evaporation rate: Freezing point: Coefficient of H20 / oil distrib: White paste 1.6 Not applicable. Not determined. Not determined. Not determined. Odour: Odour threshold: Vapour density: Boiling point: pH: Solubility in water: Slight odour. Not determined. Not applicable. Not determined. Not determined. Insoluble.

FIRE AND EXPLOSION DATA Flash point / Method: Conditions of flammability: Means of extinction: Special fire fighting procedures: Hazardous combustion products: Sensitivity to mechanical impact / static discharge: > 100º C Nonflammable. Flammable limits: Auto-ignition temperature: Not applicable. Not applicable.

As appropriate for surrounding fire (e.g. Water, CO2, Dry Chemical, Foam). None known. A NIOSH-approved self-contained breathing apparatus (SCBA) should be worn when fighting fires involving chemicals. None known. Normal products of combustion are expected including CO and CO2. Not susceptible to mechanical impact or to a static discharge. REACTIVITY DATA

Stability: Incompatible materials: Hazardous decomposition products:

Stable.

Conditions of reactivity:

None known.

Strong acids, peroxides and other oxidizing agents. Thermal decomposition products can be formed; e.g. CO and CO2. TOXICOLOGICAL PROPERTIES

Likely routes of exposure: Exposure limits: Acute effects of exposure:

None known

Skin contact

Skin absorption

Eye contact

Inhalation

See “Ingredients” section above. Eyes: Can cause irritation but injury is unlikely. Skin: Irritation. Sensitization is possible with some individuals; e.g. itching redness, swelling, etc.. Inhalation: No effects expected. Ingestion: Not considered a route of exposure. Effects of ingestion have not been determined. Considered to have a low acute oral toxicity.

HILTI ® is a registered trademark of Hilti Corp.

Chronic effects of exposure:

None known. Contains crystalline silica (sand) which is classified by IARC as Group 1 based upon chronic exposure to silica dust. This product does not pose a dust hazard; therefore this classification is not relevant. In vitro studies of quartz sand have shown mutagenic effects in mammalian and human cells. The nature and intended use of this product does not pose an increased risk to cancer or biological mutations. None known. FIRST AID MEASURES

Synergistic materials:

Eyes: Skin: Inhalation: Ingestion:

Flush with plenty of water. Call a physician if symptoms occur. Wash with soap and water. Seek medical attention if any effects persist. No ill effects expected. Should discomfort occur, move to fresh air. Do not induce vomiting unless large amounts are ingested. If conscious, give plenty of water to drink. Never give anything by mouth to an unconscious person. Contact a physician immediately. Referral to a physician is recommended if there is any question about the seriousness of the injury/exposure CONTROL MEASURES AND PERSONAL PROTECTIVE EQUIPMENT

Other:

Engineering controls: Eye protection: Skin protection: Respiratory protection: Other:

General (natural or mechanically induced fresh air movements). Refer to protective measures for Part B (page 4). Refer to protective measures for Part B (page 4). None normally required. No additional measures are normally required. PRECAUTIONS FOR SAFE HANDLING AND USE

Handling procedures and equipment: Storage requirements: Spill, leak or release: Waste disposal:

For industrial use only. Use with adequate ventilation. Do not get into the eyes. Avoid prolonged or repeated contact with the skin. Practice good hygiene; i.e., wash after using and before eating or smoking. Keep out of reach of children. Store in a cool dry area. Keep from freezing. Store between 5º and 35º C. Immediately wipe away spilled material before it hardens. Place in a container for proper disposal. No known restrictions. Consult with regulatory agencies or your corporate personnel for disposal methods that comply with local, provincial, and federal safety, health and environmental regulations. Avoid temperature extremes. Keep from freezing. REGULATORY INFORMATION

Special shipping instructions:

WHMIS classification: HMIS codes: TDG shipping name:

D2A, D2B Health 2, Flammability 1, Reactivity 0, PPE B Not regulated. (Part B is regulated; see page 4)

MSDS 840C, Page 2 of 4

HSE 2421 High Strength Epoxy DESCRIPTION: Part B / Amine hardener for high strength epoxy resin (Part B is the small tube) INGREDIENTS INFORMATION Ingredient n-aminoethylpiperazine Nonyl phenol Processed silica Fumed silica Iron oxide Phyllosilicate ** Ethylene glycol CAS Number 00140-31-8 25154-52-3 14808-60-7 07631-86-9 01317-61-9 Proprietary ** 00107-21-1 % (wt.) 30 - 50 30 - 50 20 - 40 0.1 - 10 0.1 - 10 0.1 - 10 0.1 - 02 LC50, (rat) N/Av N/Av N/Av N/Av N/Av N/Av N/Av LD50 (rat) 2.14 ml/kg 580 mg/kg N/Av 5,000 mg/kg N/Av N/Av 4,700 mg/kg TLV (mg/m3) N/Av N/Av N/Ap / 0.05 N/Av N/Ap / 5 N/Av N/Av STEL (mg/m3) N/Av N/Av N/Av N/Av N/Av N/Av N/Ap/C:100 (A)

** HMIRC registration number 4654: 10 December, 1999 PHYSICAL PROPERTIES Appearance / Physical state: Specific gravity (at 20ºC): Vapour pressure (at 20ºC): Evaporation rate: Freezing point: Coefficient of H20 / oil distrib: Black paste. 1.4 Not applicable. Not determined. Not determined. Not determined. Odour: Odour threshold: Vapour density: Boiling point: pH: Solubility in water: Amine odour. Not determined. Not applicable. > 100º C Not determined. Negligible.

FIRE AND EXPLOSION DATA Flash point / Method: Conditions of flammability: Means of extinction: Special fire fighting procedures: Hazardous combustion products: Sensitivity to mechanical impact / static discharge: Nonflammable. Not determined. Flammable limits: Auto-ignition temperature: Not applicable. Not applicable.

As appropriate for surrounding fire (e.g. Water, CO2, Dry Chemical, Foam). None known. A NIOSH-approved self-contained breathing apparatus (SCBA) should be worn when fighting fires involving chemicals. None known. Normal products of combustion are expected including CO, CO2 and NOX. Not susceptible to mechanical impact or to a static discharge.

REACTIVITY DATA Stability: Incompatible materials: Hazardous decomposition products: Stable. Conditions of reactivity: None known.

Strong acids, peroxides and other oxidizing agents. Thermal decomposition products can be formed; e.g. CO and CO2.

TOXICOLOGICAL PROPERTIES Likely routes of exposure: Exposure limits: Acute effects of exposure: None known Skin contact Skin absorption Eye contact Inhalation

See “Ingredients” section above. Eyes: Severe irritation and possible burns. Skin: Can cause severe irritation and/or skin burns. Inhalation: No effects expected; irritation is possible. Ingestion: Not considered a route of exposure. If ingested, corrosive effects are likely. None known. Contains crystalline silica (sand) which is classified by IARC as Group 1 based upon chronic exposure to silica dust. This product does not pose a dust hazard; therefore this classification is not relevant. In vitro studies of quartz sand have shown mutagenic effects in mammalian and human cells. The nature and intended use of this product does not pose an increased risk to cancer or biological mutations. None known.

Chronic effects of exposure:

Synergistic materials:

MSDS 840C, Page 3 of 4

FIRST AID MEASURES Eyes: Skin: Inhalation: Ingestion: Flush immediately with clean water for at least 15 minutes. Contact a physician. Wash immediately with soap and water. Seek medical attention if any effects persist. Launder contaminated clothing before reuse. No ill effects expected. Should discomfort occur, move to fresh air. If conscious, give 1 or 2 glasses of water to dilute. Never give anything by mouth to an unconscious person. Do not induce vomiting unless directed by a physician. Contact a physician immediately. Referral to a physician is recommended if there is any question about the seriousness of the injury/exposure CONTROL MEASURES AND PERSONAL PROTECTIVE EQUIPMENT Engineering controls: Eye protection: Skin protection: Respiratory protection: Other: General (natural or mechanically induced fresh air movements). Chemical goggles recommended; safety glasses with side-shields as a minimum. Cloth gloves are suitable; impermeable (neoprene or rubber) gloves recommended. None normally required. No additional measures are normally required. PRECAUTIONS FOR SAFE HANDLING AND USE Handling procedures and equipment: Storage requirements: Spill, leak or release: Waste disposal: For industrial use only. Use with adequate ventilation. Do not get into the eyes. Avoid contact with the skin. Practice good hygiene; i.e., wash after using and before eating or smoking. Keep out of reach of children. Store in a cool dry area. Keep from freezing. Store between 5º and 35º C. Immediately wipe away spilled material before it hardens. Place in a container for proper disposal. No known restrictions. Consult with regulatory agencies or your corporate personnel for disposal methods that comply with local, provincial, and federal safety, health and environmental regulations. Avoid temperature extremes. Keep from freezing. REGULATORY INFORMATION WHMIS classification: HMIS codes: TDG shipping name: D2A, D2B, E Health 3, Flammability 1, Reactivity 0, PPE B (Goggles, Gloves) For containers > 1 gallon : Corrosive liquids, n.o.s. (contains n-aminoethyl piperazine, nonyl phenol), Class 8 (9.2), UN1760, PG III. For containers < 1 gallon : consumer commodity PREPARATION INFORMATION / CONTACTS Prepared by: Customer Service: Health / Safety contacts: Abbreviations used: Hilti, Inc., Tulsa, OK USA Emergency phone number: 1 800 424 9300

Other:

Special shipping instructions:

Hilti (Canada) Corporation, Mississauga, Ontario; 1 800 363 4458 Hilti, Inc., Tulsa, OK USA; 1 800 879 6000, Jerry Metcalf (x6704) N/E = None Established. N/A = Not Applicable. N/Av = Not Available. A = “as an aerosol”. HMIS: Hazardous Materials Identification System

The information and recommendations contained herein are based upon data believed to be correct; however, no guarantee or warranty of any kind expressed or implied is made with respect to the information provided.

MSDS 840C, Page 4 of 4


								
To top