Cable Management Cable Tray Systems and Cable Ladder Systems

Document Sample
Cable Management Cable Tray Systems and Cable Ladder Systems Powered By Docstoc
					                                                                                                                                                                           Anexa 4.1



            Standarde europene CEN şi CENELEC ratificate si disponibile în perioada ( ianuarie-martie) 2007
            şi care au data limită de adoptare ca SR EN în perioada ( iulie-septembrie) 2007




Nr crt                   Document EN                                                             Titlul in limba engleza                                                      CT ASRO
                                               Rotating electrical machines -- Part 26: Effects of unbalanced voltages on the performance of three-phase cage
          1 EN 60034-26:2006                   induction motors                                                                                                                         1
                                               Rotating electrical machines -- Part 5: Degrees of protection provided by the integral design of rotating electrical
          2 EN 60034-5:2001/A1:2007            machines (IP code) - Classification                                                                                                      1
                                               Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical
                                               symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their
          3 EN 81714-2:2007                    interchange                                                                                                                              2
                                               Power transformer and reactor fittings -- Part 3: Protective relay for hermetically sealed liquid-immersed transformers
          4 EN 50216-3:2002/A2:2006            and reactors without gaseous cushion                                                                                                     3
                                               Power transformer and reactor fittings -- Part 5: Liquid level, pressure and flow indicators, pressure relief devices and
          5 EN 50216-5:2002/A3:2006            dehydrating breathers                                                                                                                    3
          6 EN 50216-8:2005/A1:2006            Power transformer and reactor fittings -- Part 8: Butterfly valves for insulating liquid circuits                                        3
          7 EN 50121-1:2006                    Railway applications - Electromagnetic compatibility -- Part 1: General                                                                  4
                                               Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside
          8 EN 50121-2:2006                    world                                                                                                                                    4
          9 EN 50121-3-1:2006                  Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle                             4
         10 EN 50121-3-2:2006                  Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus                                              4
                                               Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and
         11 EN 50121-4:2006                    telecommunications apparatus                                                                                                             4
                                               Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of fixed power supply
         12 EN 50121-5:2006                    installations and apparatus                                                                                                              4

         13 EN 61287-1:2006                    Railway applications - Power convertors installed on board rolling stock -- Part 1: Characteristics and test methods                     4
                                               Railway applications - Urban guided transport management and command/control systems -- Part 1: System
         14 EN 62290-1:2006                    principles and fundamental concepts                                                                                                      4




                                                                                       Page 1 of 16
                               Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 4:
15 EN 60371-3-4:1995/A1:2006   Polyester film-backed mica paper with a B-stage epoxy resin binder                                                            5
                               Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 6: Glass-
16 EN 60371-3-6:1995/A1:2006   backed mica paper with a B-stage epoxy resin binder                                                                           5
                               Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 7:
17 EN 60371-3-7:1995/A1:2006   Polyester film mica paper with an epoxy resin binder for single conductor taping                                              5
                               Non-impregnated densified laminated wood for electrical purposes -- Part 1: Definitions, designation and general
18 EN 61061-1:2006             requirements                                                                                                                  5
                               Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical
19 EN 61212-2:2006             purposes -- Part 2: Methods of test                                                                                           5
20 EN 62329-2:2006             Heat shrinkable moulded shapes -- Part 2: Methods of test                                                                     5
21 EN 62271-100:2001/A2:2006   High-voltage switchgear and controlgear -- Part 100: High-voltage alternating-current circuit-breakers                        8

22 EN 62271-109:2006           High-voltage switchgear and controlgear -- Part 109: Alternating-current series capacitor by-pass switches                    8
                               High-voltage switchgear and controlgear -- Part 201: AC insulation-enclosed switchgear and controlgear for rated
23 EN 62271-201:2006           voltages above 1 kV and up to and including 52 kV                                                                             8
24 EN 62271-202:2007           High-voltage switchgear and controlgear -- Part 202: High voltage/low voltage prefabricated substation                        8
                               Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers
25 EN 60947-4-3:2000/A1:2006   and contactors for non-motor loads                                                                                            9
                               Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements - Three-position
26 EN 60947-5-8:2006           enabling switches                                                                                                             9
                               Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating
27 EN 60947-8:2003/A1:2006     electrical machines                                                                                                           9
                               Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - AC semiconductor motor
28 EN 60947-4-2:2000/A2:2006   controllers and starters                                                                                                      9
                               Boxes and enclosures for electrical accessories for household and similar fixed electrical installations -- Part 22:
29 EN 60670-22:2006            Particular requirements for connecting boxes and enclosures                                                                  11
30 EN 61537:2007               Cable management - Cable tray systems and cable ladder systems                                                               11
                               Cable trunking systems and cable ducting systems for electrical installations -- Part 2-1: Cable trunking systems and
31 EN 50085-2-1:2006           cable ducting systems intended for mounting on walls and ceilings                                                            11
32 EN 60691:2003/A1:2007       Thermal-links - Requirements and application guide                                                                           12
                               Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions,
33 EN 62231:2006               test methods and acceptance criteria                                                                                         15
                               Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma,
34 EN 61526:2007               neutron and beta radiations - Direct reading personal dose equivalent meters and monitors                                    16
35 EN 61747-3-1:2006           Liquid crystal display devices -- Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification                  17
36 EN 62317-8:2006             Ferrite cores - Dimensions -- Part 8: E-cores                                                                                20
                               Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or
37 EN 60317-0-6:2001/A1:2006   varnish impregnated, bare or enamelled round copper wire                                                                     21
                               Specifications for particular types of winding wires -- Part 0-5: General requirements - Glass-fibre braided resin or
38 EN 60317-0-5:2007           varnish impregnated, bare or enamelled rectangular copper wire                                                               21
39 EN 60601-1:2006             Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance                      22




                                                                      Page 2 of 16
40 EN 60601-2-2:2007           Medical electrical equipment -- Part 2-2: Particular requirements for the safety of high frequency surgical equipment   22
                               Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular
                               requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices
41 EN 61326-2-4:2006           according to IEC 61557-8 and                                                                                            23
42 EN 50446:2006               Straight thermocouple assembly with metal or ceramic protection tube and accessories                                    23

43 EN 60118-4:2006             Electroacoustics - Hearing aids -- Part 4: Induction loop systems for hearing aid purposes - Magnetic field strength    26
                               Ultrasonics - Pulse-echo scanners -- Part 1: Techniques for calibrating spatial measurement systems and
44 EN 61391-1:2006             measurement of system point-spread function response                                                                    26
45 EN 61672-3:2006             Electroacoustics - Sound level meters -- Part 3: Periodic tests                                                         26
46 EN 60565:2007               Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz                                26
                               Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-2: Radio disturbance
47 EN 55016-1-2:2004/A2:2006   and immunity measuring apparatus - Ancillary equipment - Conducted disturbances                                         30
                               Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-3: Radio disturbance
48 EN 55016-1-3:2006           and immunity measuring apparatus - Ancillary equipment - Disturbance power                                              30
                               Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-3: Methods of
49 EN 55016-2-3:2006           measurement of disturbances and immunity - Radiated disturbance measurements                                            30

50 EN 61000-4-12:2006          Electromagnetic compatibility (EMC) -- Part 4-12: Testing and measurement techniques - Ring wave immunity test          30

51 EN 61000-4-5:2006           Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement techniques - Surge immunity test               30
                               Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial
52 EN 61000-6-3:2007           and light-industrial environments                                                                                       30

53 EN 61000-6-4:2007           Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments      30
                               Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods
54 EN 55020:2007               of measurement                                                                                                          30
55 EN 62076:2006               Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces            31
56 EN 60695-4:2006             Fire hazard testing -- Part 4: Terminology concerning fire tests for electrotechnical products                          33
                               Superconductivity -- Part 7: Electronic characteristic measurements - Surface resistance of superconductors at
57 EN 61788-7:2006             microwave frequencies                                                                                                   34

58 EN 61788-1:2007             Superconductivity -- Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors      34

59 EN 61788-2:2007             Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors      34
60 EN 60904-1:2006             Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics                             35
61 EN 61204-7:2006             Low voltage power supplies, d.c. output -- Part 7: Safety requirements                                                  36
62 EN 62310-2:2007             Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements                               36
63 EN 60825-4:2006             Safety of laser products -- Part 4: Laser guards                                                                        38
                               Welding consumables - Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat
64 EN ISO 14343:2007           resisting steels - Classification (ISO 14343:2002 and ISO 14343:2002/Amd1:2006)                                         39




                                                                     Page 3 of 16
                                Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels
65 EN ISO 16834:2007            - Classification (ISO 16834:2006)                                                                                       39
                                Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys -
66 EN ISO 18274:2004/AC:2007    Classification (ISO 18274:2004/Cor.1:2005 and Cor.2:2006)                                                               39
                                Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and
67 EN ISO 18594:2007            steel material (ISO 18594:2007)                                                                                         39
                                Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring
68 EN 15317:2007                equipment                                                                                                               40
                                Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General
69 EN 10163-1:2004/AC:2007      requirements                                                                                                            42
                                Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and
70 EN 10210-2:2006/AC:2007      sectional properties                                                                                                    42
                                Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a
71 EN 10280:2001+A1:2007        single sheet tester                                                                                                     42
72 EN 10079:2007                Definition of steel products                                                                                            42
                                Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery
73 EN 10292:2007                conditions                                                                                                              42
                                Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert
74 EN ISO 10720:2007            gas (ISO 10720:1997)                                                                                                    45
                                Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO
75 EN ISO 4498:2007             4498:2005)                                                                                                              46
                                Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a
76 EN ISO 4507:2007             micro-hardness test (ISO 4507:2000)                                                                                     46
77 EN ISO 2740:2007             Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007)                                    46

                                Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas
78 EN ISO 23631:2006/AC:2007    chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)       52
                                Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium
79 EN ISO 8192:2007             oxidation (ISO 8192:2007)                                                                                               52
                                Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO
80 EN ISO 5667-1:2006/AC:2007   5667-1:2006)                                                                                                            52
81 EN 901:2007                  Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite                              52
82 EN ISO 16000-5:2007          Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) (ISO 16000-5:2007)                         53

83 EN 1005-5:2007               Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency    54
                                Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices (ISO
84 EN ISO 9241-400:2007         9241-400:2007)                                                                                                          54
                                Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions
85 EN ISO 15536-2:2007          for computer manikin systems (ISO 15536-2:2007)                                                                         54
86 EN 1337-4:2004/AC:2007       Structural bearings - Part 4: Roller bearings                                                                           59
87 EN 14219:2003/AC:2007        Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)                       59
88 EN 1662:1997/AC:2007         Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)                                                 59
89 EN 1665:1997/AC:2007         Hexagon bolts with flange - Heavy series                                                                                59




                                                                      Page 4 of 16
 90 EN 12277:2007                 Mountaineering equipment - Harnesses - Safety requirements and test methods                                               66
 91 EN 15312:2007                 Free access multi-sports equipment - Requirements, including safety, and test methods                                     66
 92 EN 569:2007                   Mountaineering equipment - Pitons - Safety requirements and test methods                                                  66
                                  Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing
 93 EN 1870-17:2007               machines with one saw unit (manual radial arm saws)                                                                       73
                                  Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical
 94 EN 848-1:2007                 moulding machines                                                                                                         73
                                  Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand
 95 EN 848-2:2007                 fed/integrated fed routing machines                                                                                       73
                                  Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled
 96 EN 848-3:2007                 (NC) boring and routing machines                                                                                          73
 97 EN 14268:2005/AC:2007         Irrigation techniques - Meters for irrigation water                                                                       77

 98 EN 12012-1:2007               Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators                79
 99 EN 14973:2006/AC:2007         Conveyor belts for use in underground installations - Electrical and flammability safety requirements                     84
100 EN 13586:2004/AC:2007         Cranes - Access                                                                                                           85
101 EN 13852-1:2004/AC:2007       Cranes - Offshore cranes - Part 1: General - purpose offshore cranes                                                      85
102 EN 12516-1:2005/AC:2007       Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells                              89
103 EN 14800:2007                 Corrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels                         89
                                  Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass
104 EN 15111:2007                 spectrometry)                                                                                                             95
105 EN 14704-2:2007               Determination of the elasticity of fabrics - Part 2: Multiaxial tests                                                    103
106 EN ISO 105-E05:2006/AC:2007   Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2006)                    103
107 EN ISO 105-E06:2006/AC:2007   Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO 105-E06:2006)                  103
                                  Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method
108 EN ISO 13936-3:2007           (ISO 13936-3:2005)                                                                                                       103
109 EN ISO 9073-13:2007           Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006)                  103
110 EN ISO 9073-14:2007           Textiles - Test methods for nonwovens - Part 14: Coverstock wetback (ISO 9073-14:2006)                                   103
                                  Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-
111 EN ISO 105-C10:2007           C10:2006)                                                                                                                103
                                  Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a
112 EN ISO 105-J05:2007           specimen with change in illuminant (CMCCONO2) (ISO 105-J05:2007)                                                         103
113 EN 1482-1:2007                Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling                                    105
114 EN 1482-2:2007                Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation                          105

115 EN ISO 1265:2007              Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007)     108
                                  Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and
116 EN ISO 1872-2:2007            determination of properties (ISO 1872-2:2007)                                                                            108
117 EN 14236:2007                 Ultrasonic domestic gas meters                                                                                           109
118 EN 1434-1:2007                Heat meters - Part 1: General requirements                                                                               109
119 EN 1434-2:2007                Heat meters - Part 2: Constructional requirements                                                                        109




                                                                          Page 5 of 16
120 EN 1434-4:2007             Heat meters - Part 4: Pattern approval tests                                                                                109
121 EN 1434-5:2007             Heat meters - Part 5: Initial verification tests                                                                            109
122 EN 1434-6:2007             Heat meters - Part 6: Installation, commissioning, operational monitoring and maintenance                                   109
                               Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products -
123 EN 14316-2:2007            Part 2: Specification for the installed products                                                                            113
                               Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products -
124 EN 14317-2:2007            Part 2: Specification for the installed products                                                                            113
125 EN 494:2004+A3:2007        Fibre-cement profiled sheets and fittings - Product specification and test methods                                          113
126 EN 15334:2007              Sanitary appliances - Methacrylic dispersions of high filler content                                                        114
127 EN 12407:2007              Natural stone test methods - Petrographic examination                                                                       115
128 EN 15197:2007              Wood-based panels - Flaxboards - Specifications                                                                             118
129 EN 15338:2007              Hardware for furniture - Strength and durability of extension elements and their components                                 118
                               Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry,
130 EN 634-2:2007              humid and external conditions                                                                                               118
131 EN 942:2007                Timber in joinery - General requirements                                                                                    118
                               Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of
132 EN 725-3:2007              non-oxides by thermal extraction with a carrier gas                                                                         120

133 EN 725-5:2007              Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution     120
134 EN 71-9:2005/AC:2007       Safety of toys - Part 9: Organic chemical compounds - Requirements                                                          125
135 EN 71-2:2006+A1:2007       Safety of toys - Part 2: Flammability                                                                                       125
136 EN 60974-4:2007            Arc welding equipment -- Part 4: In-service inspection and testing                                                          129
137 EN 60730-1:2000/A15:2007   Automatic electrical controls for household and similar use -- Part 1: General requirements                                 130

138 EN 61347-2-7:2006          Lamp controlgear -- Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting          131
139 EN 62034:2006              Automatic test systems for battery powered emergency escape lighting                                                        131
140 EN 60598-1:2004/A1:2006    Luminaires -- Part 1: General requirements and tests                                                                        131
141 EN 60155:1995/A2:2007      Glow-starters for fluorescent lamps                                                                                         131
                               Fixed capacitors for use in electronic equipment -- Part 3: Sectional specification: Surface mount fixed tantalum
142 EN 60384-3:2006            electrolytic capacitors with manganese dioxide solid electrolyte                                                            135
                               Fixed capacitors for use in electronic equipment -- Part 3-1: Blank detail specification: Surface mount fixed tantalum
143 EN 60384-3-1:2006          electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ                                      135
144 HD 60364-4-41:2007         Low-voltage electrical installations -- Part 4-41: Protection for safety - Protection against electric shock                136
                               Low-voltage electrical installations -- Part 7-704: Requirements for special installations or locations - Construction
145 HD 60364-7-704:2007        and demolition site installations                                                                                           136
                               Low-voltage electrical installations -- Part 7-706: Requirements for special installations or locations - Conducting
146 HD 60364-7-706:2007        locations with restricted movement                                                                                          136
147 HD 60364-6:2007            Low voltage electrical installations -- Part 6: Verification                                                                136
                               Low-voltage electrical installations -- Part 5-54: Selection and erection of electrical equipment - Earthing
148 HD 60364-5-54:2007         arrangements, protective conductors and protective bonding conductors                                                       136




                                                                        Page 6 of 16
                          Low-voltage electrical installations -- Part 7-701: Requirements for special installations or locations - Locations
149 HD 60364-7-701:2007   containing a bath or shower                                                                                                  136
                          Low-voltage electrical installations -- Part 7-705: Requirements for special installations or locations - Agricultural and
150 HD 60364-7-705:2007   horticultural premises                                                                                                       136
151 EN 60079-11:2007      Explosive atmospheres -- Part 11: Equipment protection by intrinsic safety "i"                                               137
152 EN 60079-7:2007       Explosive atmospheres -- Part 7: Equipment protection by increased safety "e"                                                137
153 EN 61241-0:2006       Electrical apparatus for use in the presence of combustible dust -- Part 0: General requirements                             137

154 EN 61241-11:2006      Electrical apparatus for use in the presence of combustible dust -- Part 11: Protection by intrinsic safety "iD"             137
155 EN 61241-4:2006       Electrical apparatus for use in the presence of combustible dust -- Part 4: Type of protection "pD"                          137

156 EN 60079-28:2007      Explosive atmospheres -- Part 28: Protection of equipment and transmission systems using optical radiation                   137
157 EN 60079-26:2007      Explosive atmospheres -- Part 26: Equipment with equipment protection level (EPL) Ga                                         137
158 EN 60874-1-1:2007     Connectors for optical fibres and cables -- Part 1-1: Blank detail specification                                             138
159 EN 61274-1-1:2006     Adaptors for fibre optic connectors -- Part 1-1: Blank detail specification                                                  138
                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-16:
160 EN 61300-2-16:2006    Tests - Mould growth                                                                                                         138
                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-37:
161 EN 61300-2-37:2007    Tests - Cable bending for fibre optic closures                                                                               138
                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-38:
162 EN 61300-2-38:2006    Tests - Sealing for pressurized fibre optic closures                                                                         138

                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-14:
163 EN 61300-3-14:2007    Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator              138
                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15:
164 EN 61300-3-15:2007    Examinations and measurements - Dome eccentricity of a convex polished ferrule endface                                       138

                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-24:
165 EN 61300-3-24:2007    Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre                     138
166 EN 61314-1-1:2006     Fibre optic fan-outs -- Part 1-1: Blank detail specification                                                                 138
                          Fibre optic interconnecting devices and passive components performance standard -- Part 101-2: Fibre management
167 EN 61753-101-2:2006   systems for category C - Controlled environment                                                                              138
                          Fibre optic connector optical interfaces -- Part 2-2: Optical interface standard single mode angled physically
168 EN 61755-2-2:2006     contacting fibres                                                                                                            138
                          Dynamic modules -- Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled
169 EN 62343-1-3:2006     environments (Category C)                                                                                                    138
                          Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2-2:
170 EN 50411-2-2:2007     Sealed pan fibre splice closures Type 1, for category S & A                                                                  138
171 EN 60874-1:2007       Connectors for optical fibres and cables -- Part 1: Generic specification                                                    138
                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-33:
172 EN 61300-2-33:2007    Tests - Assembly and disassembly of fibre optic closures                                                                     138
                          Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-47:
173 EN 61300-2-47:2007    Tests - Thermal shocks                                                                                                       138




                                                                 Page 7 of 16
                              Fibre optic connector optical interfaces -- Part 3-5: Optical Interface - 2,5 mm and 1,25 mm diameter cylindrical PC
174 EN 61755-3-5:2006         composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre                                   138

                              Fibre optic connector optical interfaces -- Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8
175 EN 61755-3-6:2006         degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre                 138
176 EN 61163-1:2006           Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots                                     144
177 EN 62308:2006             Equipment reliability - Reliability assessment methods                                                                 144
178 EN 15341:2007             Maintenance - Maintenance Key Performance Indicators                                                                   144
                              Connectors for electronic equipment - Product requirements -- Part 3-104: Detail specification for 8-way, shielded
179 EN 61076-3-104:2006       free and fixed connectors for data transmissions with frequencies up to 1 000 MHz                                      145
                              Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangular connectors - Detail
                              specification for protective housings for use with 8-way shielded and unshielded connectors for industrial
180 EN 61076-3-106:2006       environments incorporating the IEC 60603-7                                                                             145
                              Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 3: Electromagnetic
181 EN 61587-3:2006           shielding performance tests for cabinets, racks and subracks                                                           145
182 EN 175301-801:2006        Detail Specification: High density rectangular connectors, round removable crimp contacts                              145
183 EN 15016-2:2004/AC:2007   Technical drawings - Railway applications - Part 2: Parts lists                                                        146
184 EN 13232-8:2007           Railway applications - Track - Switches and crossings - Part 8: Expansion devices                                      146
185 EN 1395-1:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements                  155

186 EN 1395-2:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF         155
187 EN 1395-3:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying                          155
188 EN 1395-4:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying                       155

189 EN 1395-5:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers           155
190 EN 1395-6:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems                   155
191 EN 1395-7:2007            Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems                   155
192 EN 15311:2007             Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions                            155
193 EN 15339-2:2007           Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units                      155
194 EN 15340:2007             Thermal spraying - Determination of shear load resistance of thermally sprayed coatings                                155
                              Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and
195 EN 15206:2007             cast iron                                                                                                              157
                              Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or
196 EN 15282:2007             industrial effluents and sludges                                                                                       157
                              Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not
197 EN 50397-1:2006           exceeding 36 kV a.c. -- Part 1: Covered conductors                                                                     159
198 EN 50214:2006             Flat polyvinyl chloride sheathed flexible cables                                                                       159
                              Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation -- Part 15: Single core
199 HD 21.15 S1:2006          cables, insulated with halogen-free thermoplastic compound, for fixed wiring                                           159
200 EN 50117-1:2002/A1:2006   Coaxial cables -- Part 1: Generic specification                                                                        160




                                                                    Page 8 of 16
                               Metallic communication cables test methods -- Part 4-7: Electromagnetic compatibility (EMC) - Test method for
201 EN 62153-4-7:2006          measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method                      160
202 EN 61982-1:2006            Secondary batteries for the propulsion of electric road vehicles -- Part 1: Test parameters                                 161

203 EN 50272-4:2007            Safety requirements for secondary batteries and battery installations -- Part 4: Batteries for use in portable appliances   161
                               Electricity metering - Data exchange for meter reading, tariff and load control -- Part 47: COSEM transport layers for
204 EN 62056-47:2007           IPv4 networks                                                                                                               164
                               Electricity metering - Data exchange for meter reading, tariff and load control -- Part 61: Object identification system
205 EN 62056-61:2007           (OBIS)                                                                                                                      164
206 EN 62056-62:2007           Electricity metering - Data exchange for meter reading, tariff and load control -- Part 62: Interface classes               164
207 EN 13160-5:2004/AC:2007    Leak detection systems - Part 5: Tank gauge leak detection systems                                                          169
208 EN ISO 16812:2007          Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007)                       169
209 EN 13480-8:2007            Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping                       169
                               Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-
210 EN ISO 10441:2007          purpose applications (ISO 10441:2007)                                                                                       169
211 EN 1396:2007               Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications                      170
212 EN 570:2007                Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification                      170
                               Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous
213 EN 14286:2007              goods                                                                                                                       170
214 EN 60027-1:2006            Letter symbols to be used in electrical technology -- Part 1: General                                                       173
215 EN ISO 13690:2007          Cereals, pulses and milled products - Sampling of static batches (ISO 13690:1999)                                           180
                               Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance
216 EN ISO 15302:2007          liquid chromatography method (ISO 15302:1998)                                                                               180
                               Wheat, rye and respective flours, durum wheat and durum wheat semolina - Determination of the Falling Number
217 EN ISO 3093:2007           according to Hagberg-Perten (ISO 3093:2004)                                                                                 180
218 EN ISO 6644:2007           Flowing cereals and milled cereal products - Automatic sampling by mechanical means (ISO 6644:2002)                         180

219 EN ISO 21415-1:2007        Wheat and wheat flour - Gluten content - Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006)          180
                               Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying
220 EN ISO 21415-3:2007        method (ISO 21415-3:2006)                                                                                                   180
                               Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method
221 EN ISO 21415-4:2007        (ISO 21415-4:2006)                                                                                                          180
222 EN 1085:2007               Wastewater treatment - Vocabulary                                                                                           186
223 EN 13508-2:2003/AC:2007    Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system                           186
224 EN 12697-10:2001/AC:2007   Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactibility                                            187
                               Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and
225 EN 12697-11:2005/AC:2007   bitumen                                                                                                                     187
226 EN 12697-21:2003/AC:2007   Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens                         187
227 EN 14420-1:2004+A1:2007    Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing                                      189
228 EN 14420-4:2004+A1:2007    Hose fittings with clamp units - Part 4: Flange connections                                                                 189




                                                                     Page 9 of 16
229 EN 14420-6:2004+A1:2007   Hose fittings with clamp units - Part 6: TW tank truck couplings                                                           189
230 EN 14420-7:2004+A1:2007   Hose fittings with clamp units - Part 7: Cam locking couplings                                                             189
231 EN 14420-8:2004+A1:2007   Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)                                      189
                              Digital Audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 6: Non-linear PCM
232 EN 61937-6:2006           bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats                                                        193
233 EN 60958-3:2006           Digital audio interface -- Part 3: Consumer applications                                                                   193
234 EN 15271:2007             Inland navigation vessels - Studless anchor chain - Anchor equipment                                                       199
235 EN 15272-2:2007           Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead                                                  199
                              Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2:
236 EN 10296-2:2005/AC:2007   Stainless steel                                                                                                            202
                              Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part
237 EN 10297-2:2005/AC:2007   2: Stainless steel                                                                                                         202
                              Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and
238 EN 10305-5:2003/AC:2007   rectangular tubes                                                                                                          202

239 EN 10339:2007             Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection      202
                              Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring
240 EN ISO 6149-1:2007        sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006)                                           202
                              Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring
                              sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-
241 EN ISO 6149-2:2007        2:2006)                                                                                                                    202
                              Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring
                              sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-
242 EN ISO 6149-3:2007        3:2006)                                                                                                                    202
                              Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
243 EN ISO 11507:2007         (ISO 11507:2007)                                                                                                           203
244 EN ISO 11909:2007         Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)                        203

245 EN ISO 150:2007           Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006)           203
246 EN ISO 2808:2007          Paints and varnishes - Determination of film thickness (ISO 2808:2007)                                                     203
                              Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-
247 EN ISO 2812-1:2007        1:2007)                                                                                                                    203

248 EN ISO 2812-2:2007        Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007)           203
                              Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-
249 EN ISO 2812-3:2007        3:2007)                                                                                                                    203
250 EN ISO 2812-4:2007        Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2007)                 203
                              Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-
251 EN ISO 2812-5:2007        5:2007)                                                                                                                    203
                              Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints
252 EN ISO 6504-3:2007        at a fixed spreading rate (ISO 6504-3:2006)                                                                                203
253 EN ISO 7142:2007          Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007)                                  203




                                                                   Page 10 of 16
254 EN ISO 7143:2007                 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)                 203
                                     Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for
255 EN ISO 17872:2007                corrosion testing (ISO 17872:2007)                                                                                        203
256 EN 62002-2:2006                  Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing                                         207
                                     Functional receiver specification of satellite digital interactive television with a low data rate return channel via
257 EN 50478:2007                    satellite - Modem layer specification                                                                                     207

258 EN 50090-5-3:2006                Home and Building Electronic Systems (HBES) -- Part 5-3: Media and media dependent layers - Radio frequency               207
259 EN 12101-10:2005/AC:2007         Smoke and heat control systems - Part 10: Power supplies                                                                  216
260 EN 15182-1:2007                  Hand-held branchpipes for fire service use - Part 1: Common requirements                                                  216
261 EN 15182-2:2007                  Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16                                        216
                                     Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN
262 EN 15182-3:2007                  16                                                                                                                        216
263 EN 15182-4:2007                  Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40                                      216
264 EN 1846-2:2001/A1:2004/AC:2007   Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance                           216
265 EN 1846-2:2001/AC:2007           Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance                           216
266 EN 54-18:2005/AC:2007            Fire detection and fire alarm systems - Part 18: Input/output devices                                                     216
                                     High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and
267 EN 14044:2005/AC:2007            performance requirements and test methods                                                                                 216
                                     Fire classification of construction products and building elements - Part 1: Classification using data from reaction to
268 EN 13501-1:2007                  fire tests                                                                                                                217
                                     Fire classification of construction products and building elements - Part 4: Classification using data from fire
269 EN 13501-4:2007                  resistance tests on components of smoke control systems                                                                   217
270 EN 14390:2007                    Fire test - Large-scale room reference test for surface products                                                          217
271 EN 1364-4:2007                   Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration                         217
                                     Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1:
272 EN 13042-1:2007                  Gob feeder                                                                                                                218
                                     Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS
273 EN 13042-3:2007                  Machines                                                                                                                  218
274 EN ISO 12625-7:2007              Tissue paper and tissue products - Part 7: Determination of optical properties (ISO 12625-7:2007)                         221

275 EN ISO 3037:2007                 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007)                  221
276 EN ISO 17249:2004/A1:2007        Safety footwear with resistance to chain saw cutting - Amendment 1 (ISO 17249:2004/Amd 1:2007)                            227
277 EN ISO 20345:2004/AC:2007        Personal protective equipment - Safety footwear (ISO 20345:2004/Cor.2:2006)                                               227
278 EN ISO 20346:2004/AC:2007        Personal protective equipment - Protective footwear (ISO 20346:2004/Cor.2:2006)                                           227
279 EN ISO 20347:2004/AC:2007        Personal protective equipment - Occupational footwear (ISO 20347:2004/Cor.2:2006)                                         227
280 EN ISO 10939:2007                Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:2007)                                                           230
                                     Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-
281 EN ISO 15004-2:2007              2:2007)                                                                                                                   230
                                     Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing
282 EN ISO 11553-2:2007              devices (ISO 11553-2:2007)                                                                                                230




                                                                            Page 11 of 16
283 EN 13799:2002/AC:2007         Contents gauges for LPG tanks                                                                                           231
284 EN 14876:2007                 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums                            231
                                  LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a
285 EN 14893:2006/AC:2007         capacity between 150 litres and 1 000 litres                                                                            231
                                  LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and
286 EN 13175:2003+A2:2007         fittings                                                                                                                231
                                  LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum
287 EN 13953:2003+A1:2007         Gas (LPG)                                                                                                               231
288 EN 13121-4:2005/AC:2007       GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance                             237
                                  Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining
289 EN 13566-7:2007               with spirally-wound pipes                                                                                               237
290 EN 60456:2005/A11:2006        Clothes washing machines for household use - Methods for measuring the performance                                      238
                                  Household and similar electrical appliances - Safety -- Part 2-2: Particular requirements for vacuum cleaners and
291 EN 60335-2-2:2003/A2:2006     water-suction cleaning appliances                                                                                       239
                                  Household and similar electrical appliances - Safety -- Part 2-35: Particular requirements for instantaneous water
292 EN 60335-2-35:2002/A1:2007    heaters                                                                                                                 239
                                  Household and similar electrical appliances - Safety -- Part 2-97: Particular requirements for drives for rolling
293 EN 60335-2-97:2006            shutters, awnings, blinds and similar equipment                                                                         239
                                  Safety of household and similar electrical appliances -- Part 2-97: Particular requirements for drives for rolling
294 EN 60335-2-97:2000/A11:2006   shutters, awnings, blinds and similar equipment                                                                         239
                                  Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation
295 EN 13032-2:2004/AC:2007       of data for indoor and outdoor work places                                                                              240
296 EN 13201-3:2003/AC:2007       Road lighting - Part 3: Calculation of performance                                                                      240

297 EN 60745-2-1:2003/A11:2007    Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for drills and impact drills      255
298 EN 60745-2-6:2003/A11:2007    Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers                       255
                                  Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse
299 EN ISO 12680-1:2007           excitation of vibration (ISO 12680-1:2005)                                                                              258
300 EN 12698-1:2007               Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods                             258
301 EN 12698-2:2007               Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods                                  258
302 EN 12972:2007                 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks                              270

                                  Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining
303 EN ISO 10848-2:2006/AC:2007   rooms - Part 2: Application to light elements when the junction has a small influence (ISO 10848-2:2006)                276

304 EN 2003-009:2007              Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination       296
                                  Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen
305 EN 2003-010:2007              content                                                                                                                 296
                                  Aerospace series - Test method - Microstructure of (a + ▀) titanium alloy wrought products - Part 002: Microstructure
306 EN 3114-002:2007              of bars, sections, forging stock and forgings                                                                           296
                                  Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and
307 EN 2821:2007                  precipitation treated - Bar for machining - a or D = 200 mm - Rm = 1 310 MPa                                            296




                                                                        Page 12 of 16
                   Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm = D = 12,5 mm - 450
308 EN 2469:2007   MPa = Rm = 650 MPa                                                                                                     296
                   Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and
309 EN 3479:2007   precipitation treated - Plate - 6 mm < a = 20 mm - 1 070 MPa = Rm = 1 220 MPa                                          296
                   Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De
310 EN 3490:2007   = 200 mm - 900 MPa = Rm = 1 100 MPa                                                                                    296
                   Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De =
311 EN 3523:2007   100 mm - 1 080 MPa = Rm = 1 280 MPa                                                                                    296
                   Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm = a
312 EN 3524:2007   = 6 mm - 1 080 MPa = Rm = 1 280 MPa                                                                                    296
313 EN 4588:2007   Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip                     296
                   Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a = 20 mm -
314 EN 3525:2007    1 080 MPa = Rm = 1 280 MPa                                                                                            296
                   Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm =
315 EN 3526:2007   a = 6 mm - 980 MPa = Rm = 1 180 MPa                                                                                    296

316 EN 3527:2007   Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D = 300 mm               296

                   Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted -
317 EN 3531:2007   Solution treated and precipitation treated - Sheet and strip - a = 6 mm - 1 750 MPa = Rm = 2 000 MPa                   296

                   Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted -
318 EN 3532:2007   Solution treated and precipitation treated - Plate - 6 mm < a = 40 mm - 1 750 MPa = Rm = 2 000 MPa                     296
                   Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution
319 EN 3638:2007   and precipitation treated - Sheet, strip and plate - 0,5 mm = a = 10 mm                                                296
                   Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D = 250
320 EN 3671:2007   mm                                                                                                                     296
                   Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated -
321 EN 3677:2007   Forgings - a or D = 200 mm - Rm = 1 310 MPa                                                                            296
                   Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated -
322 EN 3678:2007   Forgings - a or D = 200 mm - Rm = 930 MPa                                                                              296
323 EN 3997:2007   Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm = a = 6 mm                                     296
324 EN 3998:2007   Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm = a = 6 mm                              296
                   Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability
325 EN 4001:2007   1,6 mm = a = 6 mm                                                                                                      296
326 EN 4004:2007   Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm = a = 6 mm                                    296
327 EN 4005:2007   Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm = a = 6 mm                                      296
328 EN 4006:2007   Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm = a = 6 mm                              296
                   Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary a content - Point count
329 EN 3683:2007   method and line intercept method                                                                                       296
                   Aerospace series - Test methods - Titanium alloy wrought products - Determination of ▀ transus temperature -
330 EN 3684:2007   Metallographic method                                                                                                  296




                                                       Page 13 of 16
                                Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal
                                activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase
331 EN 1657:2005/AC:2007        2, step 1)                                                                                                                298
                                Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A,
332 EN 3155-004:2007            crimp, class T - Product standard                                                                                         303
                                Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature
333 EN 3645-001:2007            175 ░C or 200 ░C continuous - Part 001: Technical specification                                                           303

                                Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature
334 EN 3645-002:2007            175 ░C or 200 ░C continuous - Part 002: Specification of performance and contact arrangements                             303
                                Aerospace series - Connectors, electrical, circular, bayonet coupling, op-erating temperature 175 ░C or 200 ░C
335 EN 3646-001:2007            continuous - Part 001: Technical specification                                                                            303
                                Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ░C or 200 ░C
336 EN 3646-002:2007            continuous - Part 002: Specification of performance and contact arrangements                                              303
                                Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and
                                including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or
337 EN 13785:2005/AC:2007       their mixtures                                                                                                            305
338 EN 161:2007                 Automatic shut-off valves for gas burners and gas appliances                                                              305
                                Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles
339 EN 624:2000/A2:2007         and boats                                                                                                                 305
340 EN 15250:2007               Slow heat release appliances fired by solid fuel - Requirements and test methods                                          305
                                Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and
341 EN 1367-1:2007              thawing                                                                                                                   306
                                Low-voltage surge protective devices -- Part 11: Surge protective devices connected to low-voltage power systems -
342 EN 61643-11:2002/A11:2007   Requirements and tests                                                                                                    311
343 HD 638 S1:2001/A1:2006      Road traffic signal systems                                                                                               312
344 EN 1670:2007                Building hardware - Corrosion resistance - Requirements and test methods                                                  318
345 EN 13606-1:2007             Health informatics - Electronic health record communication - Part 1: Reference model                                     319
346 EN 13606-4:2007             Health informatics - Electronic health record communication - Part 4: Security                                            319
347 EN 1064:2005+A1:2007        Health informatics - Standard communication protocol - Computer-assisted electrocardiography                              319
                                Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and
                                quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas
348 EN 12766-3:2004/AC:2007     chromatography (GC) using an electron ca                                                                                  320
349 EN ISO 4257:2001/AC:2007    Liquefied petroleum gases - Method of sampling (ISO 4257:2001/Cor.1:2007)                                                 320
350 EN 12592:2007               Bitumen and bituminous binders - Determination of solubility                                                              320
351 EN 12593:2007               Bitumen and bituminous binders - Determination of the Fraass breaking point                                               320
352 EN 12594:2007               Bitumen and bituminous binders - Preparation of test samples                                                              320
353 EN 12595:2007               Bitumen and bituminous binders - Determination of kinematic viscosity                                                     320
354 EN 12596:2007               Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary                                   320
355 EN 12606-1:2007             Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation               320
                                Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air -
356 EN 12607-1:2007             Part 1: RTFOT method                                                                                                      320




                                                                     Page 14 of 16
                              Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air -
357 EN 12607-2:2007           Part 2: TFOT Method.                                                                                                      320
                              Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air -
358 EN 12607-3:2007           Part 3: RFT Method                                                                                                        320
                              Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer
359 EN 15326:2007             method                                                                                                                    320
360 EN 1426:2007              Bitumen and bituminous binders - Determination of needle penetration                                                      320
361 EN 1427:2007              Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method                              320
362 EN 13791:2007             Assessment of in-situ compressive strength in structures and precast concrete components                                  321
                              Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride
363 EN 14629:2007             content in hardened concrete                                                                                              321
364 EN 1318:2005/AC:2007      Textile floor coverings - Determination of the apparent effective thickness of the backing                                324
                              Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading -
365 EN 14081-4:2005+A1:2007   Grading machine settings for machine controlled systems                                                                   326
366 EN 1912:2004+A1:2007      Structural timber - Strength classes - Assignment of visual grades and species                                            326
                              Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type
367 EN 383:2007               fasteners                                                                                                                 326
368 EN 14814:2007             Adhesives for thermoplastic piping systems for fluids under pressure - Specifications                                     338

369 EN 15336:2007             Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified)            338
                              Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S
370 EN 1993-1-12:2007         700                                                                                                                       343
371 EN 1993-1-6:2007          Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures                            343
372 EN 1993-4-1:2007          Eurocode 3 - Design of steel structures - Part 4-1: Silos                                                                 343
373 EN 1993-4-2:2007          Eurocode 3 - Design of steel structures - Part 4-2: Tanks                                                                 343
374 EN 1993-4-3:2007          Eurocode 3 - Design of steel structures - Part 4-3: Pipelines                                                             343
375 EN 1993-5:2007            Eurocode 3 - Design of steel structures - Part 5: Piling                                                                  343
376 EN 1999-1-2:2007          Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design                                            343
377 EN 1999-1-4:2007          Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting                                   343
378 EN 1999-1-5:2007          Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures                                                  343
379 EN 1997-2:2007            Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing                                               343
380 EN 13084-1:2007           Free-standing chimneys - Part 1: General requirements                                                                     347
                              Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for
381 EN 14989-1:2007           roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances                              347
382 EN 1052-3:2002/A1:2007    Methods of test for masonry - Part 3: Determination of initial shear strength                                             347
383 EN ISO 14971:2007         Medical devices - Application of risk management to medical devices (ISO 14971:2007)                                      350
384 EN 1473:2007              Installation and equipment for liquefied natural gas - Design of onshore installations                                    357
385 EN 14986:2007             Design of fans working in potentially explosive atmospheres                                                               358
386 EN 14994:2007             Gas explosion venting protective systems                                                                                  358

387 EN 14591-2:2007           Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers     358




                                                                   Page 15 of 16
388 EN 14983:2007           Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage          358
389 EN ISO 19123:2007       Geographic information - Schema for coverage geometry and functions (ISO 19123:2005)                                       359
390 EN ISO 19133:2007       Geographic information - Location-based services - Tracking and navigation (ISO 19133:2005)                                359
391 EN ISO 19135:2007       Geographic information - Procedures for item registration (ISO 19135:2005)                                                 359
392 EN 15169:2007           Characterization of waste - Determination of loss on ignition in waste, sludge and sediments                               360
393 EN ISO 16720:2007       Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005)                           360
                            Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination
394 EN 14582:2007           methods                                                                                                                    360
395 EN 15237:2007           Execution of special geotechnical works - Vertical drainage                                                                361
396 EN 14836:2005/AC:2007   Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering                                            363
                            Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1:
397 EN 15330-1:2007         Specification for synthetic turf                                                                                           363
398 EN 15301-1:2007         Surfaces for sports areas - Part 1: Determination of rotational resistance                                                 363
399 EN 15306:2007           Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear                                           363
400 EN 12229:2007           Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces                   363
401 EN 50116:2006           Information technology equipment - Routine electrical safety testing in production                                         368
                            Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches
402 EN ISO 11334-1:2007     (ISO 11334-1:2007)                                                                                                         369
403 EN ISO 14607:2007       Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2007)                                 369
404 EN ISO 9999:2007        Assistive products for persons with disability - Classification and terminology (ISO 9999:2007)                            369
                            Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and
405 EN ISO 11140-3:2007     Dick-type steam penetration test (ISO 11140-3:2007)                                                                        370
                            Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie
406 EN ISO 11140-4:2007     and Dick-type test for detection of steam penetration (ISO 11140-4:2007)                                                   370
407 EN 15529:2007           Derivatives from coal pyrolysis - Terminology                                                                              372
408 EN 15536:2007           Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods                         372
                            Postal service - Quality of service - Measurement of the transit time of end-to end-services for single piece priority
409 EN 13850:2002+A1:2007   mail and first class mail                                                                                                  373
                            Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-
410 EN 14508:2003+A1:2007   priority mail and second class mail                                                                                        373
411 EN 14534:2003+A1:2007   Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail                373




                                                                 Page 16 of 16

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:366
posted:12/1/2010
language:Romanian
pages:16
Description: Cable Management Cable Tray Systems and Cable Ladder Systems document sample