6X9 Speaker Template - PDF

Document Sample
6X9 Speaker Template - PDF Powered By Docstoc
					SPK008
6x9 4 WAY WAKE ToWER
SPEAKER SYSTEM




          InstructIon leaflet
                                         InstallatIon InstructIons
The wake tower speaker is designed to hang from a wake                 speaker cable WIrIng
tower of diameter ranging from 40–50 mm (1.5”–2”).
                                                                       1. Take the two (2) supplied rubber grommets and snip off
attachIng the speaker to the Wake toWer                                   the end so a hole the diameter of your speaker cable
                                                                          is made. GME recommends the use of 6–10 mm (0.2”
1. Remove both nuts holding the top plate onto the                        –0.4”) speaker cable depending on the cable run to
   bracket using a 4.75 mm (0.2”) allen key.                              your stereo or amp.


                                                                                                           Speaker wire diameter


                                                                       2. Place the rubber grommet over the end of the speaker
                                                                          cable. This needs to be done twice for each terminal on
                                                                          the speaker.



                                                                       3. Once the grommets have been placed over the speaker
                                                                          wire, attach the wires to the terminals on the back of
2. Remove the top plate.                                                  the speaker.
3. Place the speaker and the top of the bracket around the
   wake tower in desired
   position. Screw in the nuts.

           Self-adhesive
           rubber pad
                                                                       4. Ensure the positive speaker cable is attached to the red
                                                                          terminal and the negative speaker cable is attached to
                                                                          the black terminal.

                                                                       5. Slide the rubber grommet over the terminal, ensure the
                                                                          whole of the terminal is covered.
                                                                                                              Terminal
                                                                                                                         Grommet




4. Ensure the speakers are facing in the desired direction                                                                Speaker Wire
   and tighten.
                                                                       6. Connect the other end of the speaker wire to your amp
Once the speaker has been attached to the wake tower, the
                                                                          or stereo system.
speaker cables can be attached.
S PK0 08                             T E C H N IC A L S P E C IF IC AT IO N A N D C UTTI N G TEMPLATE                         SPK008
                                           speaker drIver specIfIcatIons

                                                                               spk008
                                    system - mm (inches)                       152 x 229 (6” x 9”)
                                                  power Watts                  210
                                   tweeter - mm (inches)                       13 (½”) Neo PEI dome x 2
                                Midrange - mm (inches)                         51 (2”) mylar cone
                                   efficiency (1M/1W) db                       91
                                     frequency response                        60 Hz–22 kHz
                                        Impedance (ohms)                       4
                                         Weight - kgs (lbs)                    4.15 (9.1)

                                                                WarrantY
GME limit this warranty to the original purchaser of the                      procedure to be followed by claimant: In the event of a
equipment.                                                                    defect occurring during the warranty period, the original purchaser
                                                                              may return the defective unit along with suitable proof of purchase
GME warrant the SPK008 to be free from defects in material and
                                                                              date (i.e. receipt, docket, credit card slip etc.) and a full description
workmanship for a period of thirty six (36) months from the date
                                                                              of the defect to the retailer from whom the unit was purchased. All
of purchase from their authorised retailer.
                                                                              freight charges incurred for transportation by the retailer or GME
Should the product require servicing during this period, all labour           are the purchaser’s responsibility.
and parts used to effect repairs will be supplied free of charge.
GME reserve the right to determine whether damage has been                    GME AFTER SALES SERVICE
occasioned by accident, misuse or improper installation whereby
                                                                              Your speaker is especially designed for the environment
the warranty would be void, including equipment which has been
                                                                              encountered in land and marine installations. The use of all
damaged due to:
                                                                              solid state circuitry, careful design and rigorous testing, result in
(a)   Incorrect or reverse polarity connection to a battery or power          high reliability. Should failure occur however, GME maintain a
      supply or to an incorrect supply voltage.                               fully equipped service facility and spare parts stock to meet the
                                                                              customer’s requirements long after expiry of the warranty period.
(b)   Operation without an antenna or by connection to an
      antenna which has been incorrectly installed, resulting in
      damage to the speaker’s output circuit.

(c)   Effects of water or moisture penetration.

(d)   Non-factory modifications.

S PK0 08                                   T E C H N IC A L S P E C IF IC AT IO N A N D C UTTI N G TEMPLATE                                   SPK008
                                     A Division of   standard communications ptY. ltd.
                                     head office: sYdneY- Locked Bag 2086, North Ryde, NSW 1670, Australia.
                                     Tel: +61 (0)2 9844 6666 Fax : +61 (0)2 9844 6600

Melbourne                    adelaIde                   perth                       brIsbane                   sYdneY                 auckland
7 Micro Circuit              14 Phillips Street         Unit 1                      Unit 1                     Unit B                 Unit 2
DANDENONG STH 3165           THEBARTON 5031             10-12 Harvard Way           89-101 Factory Road        22-24 College Street   24 Bishop Dunn Pl.
Tel: (03) 9798 0988          Tel: (08) 8234 2633        CANNING VALE 6155           OXLEY 4075                 GLADESVILLE 2111       East Tamakii
Fax: (03) 9798 0177          Fax: (08) 8234 5138        Tel: (08) 9455 5744         Tel: (07) 3278 6444        Tel: (02) 9879 8888    MANUKAU 2013 NZ
                                                        Fax: (08) 9455 3110         Fax: (07) 3278 6555        Fax: (02) 9816 4722    Tel: (09) 274 0955
                                                                                                                                      Fax: (09) 274 0959

For customers outside Australia and New Zealand please contact your local GME Distributor or email: export@gme.net.au      www.gme.net.au
Part Number: 310437 Drawing Number: 44317-2                                                                                                      SPK008

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:1187
posted:12/1/2010
language:English
pages:4
Description: 6X9 Speaker Template document sample