Docstoc

Ironclad

Document Sample
Ironclad Powered By Docstoc
					From Wikipedia, the free encyclopedia

Ironclad warship

Ironclad warship
heavier naval guns (the ironclads of the 1880s carried some of the heaviest guns ever mounted at sea), more sophisticated steam engines, and advances in metallurgy which made steel shipbuilding possible. The rapid pace of change in the ironclad period meant that many ships were obsolete as soon as they were complete, and that naval tactics were in a state of flux. Many ironclads were built to make use of the ram or the torpedo, which a number of naval designers considered the crucial weapons of naval combat. There is no clear end to the ironclad period, but towards the end of the 1890s the term ironclad dropped out of use. New ships were increasingly constructed to a standard pattern and designated battleships or armored cruisers.

The first battle between ironclads: CSS Virginia/Merrimac (left) vs. USS Monitor, in 1862 at the Battle of Hampton Roads An ironclad was a steam-propelled warship in the later part of the 19th century, protected by iron or steel armor plates.[1] The ironclad was developed as a result of the vulnerability of wooden warships to explosive or incendiary shells. The first ironclad battleship, La Gloire, was launched by the French Navy in November 1859.[2] The British Royal Navy had been considering armoured warships since 1856 and prepared a draft design for an armoured corvette in 1857, however in early 1859 the Royal Navy started building two iron-hulled armoured frigates, and by 1861 had made the decision to move to an all-armoured battlefleet. After the first clashes of ironclads (both with wooden ships and with one another) took place during the American Civil War, it became clear that the ironclad had replaced the unarmored ship of the line as the most powerful warship afloat. This type of ship would come to be very successful in the American Civil War.[3] Ironclads were designed for several roles, including as high seas battleships, coastal defense ships, and long-range cruisers. The rapid evolution of warship design in the late 19th century transformed the ironclad from a wooden-hulled vessel that carried sails to supplement its steam engines into the steelbuilt, turreted battleships and cruisers familiar in the 20th century. This change was pushed forward by the development of

Before the ironclad
The ironclad became technically feasible and tactically necessary because of developments in shipbuilding in the first half of the 19th century. According to naval historian R.D. Hill: The (ironclad) had three chief characteristics: a metal-skinned hull, steam propulsion and a main armament of guns capable of firing explosive shells. It is only when all three characteristics are present that a fighting ship can properly be called an ironclad. R.D. Hill.[4] Each of these developments was introduced separately in the decade before the first ironclads.

Steam propulsion
In the 18th and early 19th centuries fleets had relied on two types of major warship, the ship of the line and the frigate. The first major change to these types was the introduction of steam power for propulsion. While paddle steamer warships had been used from the 1830s onwards, steam propulsion only became suitable for major warships after the adoption of the screw propeller in the 1840s.[5]

1

From Wikipedia, the free encyclopedia

Ironclad warship

A Paixhans naval shell gun. Musée de la Marine. standard armament for naval powers including the French Navy, British Royal Navy, Imperial Russian Navy and United States Navy. It is often held that the power of explosive shells to smash wooden hulls, as demonstrated by the Russian destruction of a Turkish squadron at the Battle of Sinope, spelled the end of the wooden-hulled warship.[8] The more practical threat to wooden ships was from conventional cannon firing red-hot shot, which could lodge in the hull of a wooden ship and cause a fire or ammunition explosion. Some navies even experimented with hollow shot filled with molten metal for extra incendiary power.[9]

Le Napoléon (1850), the first steam battleship Steam-powered screw frigates were built in the mid-1840s, and at the end of the decade the French Navy introduced steam power to its line of battle. The desire for change came from the ambition of Napoleon III to gain greater influence in Europe, which required a challenge to the British at sea.[6][7] The first purpose-built steam battleship was the 90-gun Le Napoléon in 1850.[5] Le Napoléon was armed as a conventional ship-ofthe-line, but her steam engines could give her a speed of 12 knots (22 km/h), regardless of the wind conditions: a potentially decisive advantage in a naval engagement. The introduction of the steam ship-of-theline led to a building competition between France and Britain. Eight sister-ships to Le Napoléon were built in France over a period of ten years, but the United Kingdom soon managed to take the lead in production. Altogether, France built ten new wooden steam battleships and converted 28 from older ships of the line, while the United Kingdom built 18 and converted 41.[5]

Iron armor

Explosive shells
The era of the wooden steam ship-of-the-line was brief, because of new, more powerful naval guns. In the 1820s and 1830s, warships began to mount increasingly heavy guns, replacing 18- and 24-pounder guns with 32-pounders on sailing ships-of-the-line and introducing 68-pounders on steamers. Then, the first shell guns firing explosive shells were introduced following their development by the French Général Henri-Joseph Paixhans, and by the 1840s were part of the French Navy ironclad floating battery Lave, 1854. This ironclad, together with the similar Tonnante and Dévastation, vanquished Russian land batteries at the Battle of Kinburn (1855). Following the demonstration of the power of explosive shells against wooden ships at the Battle of Sinope, and fearing that his own ships would be vulnerable to the Paixhans

2

From Wikipedia, the free encyclopedia
guns of Russian fortifications in the Crimean War, Emperor Napoleon III ordered the development of light-draft floating batteries, equipped with heavy guns and protected by heavy armour.[10] Experiments made during the first half of 1854 proved highly satisfactory, and on 17 July 1854, the French communicated to the British Government that a solution had been found to make gun-proof vessels and that plans would be communicated.[11] After tests in September 1854, the British Admiralty agreed to build five armoured floating batteries on the French plans.[12] The French floating batteries were deployed in 1855 as a supplement to the wooden steam battlefleet in the Crimean War. The role of the battery was to assist unarmored mortar and gunboats bombarding shore fortifications. The French used three of their ironclad batteries (Lave, Tonnante and Dévastation) in 1855 against the defenses at the Battle of Kinburn (1855) on the Black Sea, where they were effective against Russian shore defences. They would later be used again during the Italian war in the Adriatic in 1859.[13] The British floating batteries Glatton and Meteor arrived too late to participate to the action at Kinburn.[14] The British plan to use their floating armoured batteries in the Baltic Sea against Kronstadt was influential in causing the Russians to sue for peace.[15] The batteries have a claim to the title of the first ironclad warships[4] but they were capable of only 4 knots (7 km/h) under their own power: they operated under their own power at the Battle of Kinburn,[16] but had to be towed for long range transit.[17] They were also arguably marginal to the work of the navy. The brief success of the floating ironclad batteries convinced France to begin work on armored warships for their battlefleet.[15]

Ironclad warship

Model of the French La Gloire (1858), the first ocean-going ironclad La Gloire’s wooden hull was modelled on that of a steam ship of the line, reduced to one deck, sheathed in iron plates 4.5 inches (110 mm) thick. She was propelled by a steam engine, driving a single screw propeller for a speed of 13 knots (24 km/h). She was armed with thirty-six 6.4-inch (160 mm) rifled guns. France proceeded to construct 16 ironclad warships, including two more sister ships to La Gloire, and the only twodecked broadside ironclads ever built, Magenta and Solferino.[19]

HMS Warrior (1860), Britain’s first all iron warship The Royal Navy had not been keen to sacrifice their advantage in steam ships of the line, but was determined that the first British iron ship would outmatch the French ships in every respect, particularly speed. A fast ship would have the advantage of being able to choose a range of engagement which could make her invulnerable to enemy fire. The British specification was more a large, powerful frigate than a ship-of-the-line. The requirement for speed meant a very long vessel, which had to be built from iron. The resulting vessel was Warrior, built and launched

Early ironclad ships and battles
By the end of the 1850s it was clear that France was unable to match British building of steam warships, and to regain the strategic initiative a dramatic change was required. The result was the first ocean-going ironclad, the La Gloire, begun in 1857 and launched in 1859.[18]

3

From Wikipedia, the free encyclopedia
in 1860. Warrior was a successful design; her weapons and armor were more effective than that of La Gloire, and with the largest set of steam engines yet fitted to a ship she could steam at 14.3 knots (26.5 km/h).[15] By 1862, navies across Europe had adopted ironclads. Britain and France each had sixteen either completed or under construction, though the British vessels were larger. Austria, Italy, Russia, and Spain were also building ironclads.[20] However, the first battles using the new ironclad ships involved neither Britain nor France, and involved ships markedly different from the broadsidefiring, masted designs of La Gloire and Warrior. The use of ironclads by both sides in the American Civil War, and the clash of the Italian and Austrian fleets at the Battle of Lissa, had an important influence on the development of ironclad design.

Ironclad warship
CSS Virginia (Merrimack) joined the Confederate Navy, having been rebuilt at Norfolk. As USS Merrimack, Virginia originally was a conventional warship made of wood, but she was reconstructed with an iron-covered casemate when she entered the Confederate navy. By this time, the Union had completed seven ironclad gunboats of the City class, and was about to complete the USS Monitor, an innovative design proposed by the Swedish inventor John Ericsson. The Union was also building a large armored frigate, the USS New Ironsides, and the smaller USS Galena.[23] The first battle between ironclads happened on 9 March 1862, as the armored Monitor was deployed to protect the Union’s wooden fleet from the ironclad ram Virginia and other Confederate warships.[24] In this engagement, the second day of the Battle of Hampton Roads, the two ironclads repeatedly tried to ram one another while shells bounced off their armor. The battle attracted attention worldwide, making it clear that the wooden warship was now out of date, with the ironclads destroying them easily.[25]

First battles between ironclads: the U.S. Civil War

Officers of the original USS Monitor, photographed during the American Civil War. The first use of ironclads in action came in the U.S. Civil War. The U.S. Navy at the time the war broke out had no ironclads, its most powerful ships being six steam-powered unarmoured frigates.[21] Since the bulk of the Navy remained loyal to the Union, the Confederacy sought to gain advantage in the naval conflict by acquiring modern armored ships. The Confederate Congress voted $2 million in May 1861 to buy ironclads from overseas, and in July and August started work on construction and converting wooden ships.[22] On 12 October 1861, the CSS Manassas became the first ironclad to enter battle, when she fought Union warships on the Mississippi. She had been converted from a commercial vessel in New Orleans for river and coastal fighting. In February 1862, the larger

USS Cairo (1861), an example of a City class ironclad gunboat The Civil War saw more ironclads built by both sides, and they played an increasing role in the naval war alongside the unarmored warships, commerce raiders and blockade runners. The Union built a large fleet of fifty monitors modelled on their namesake. The Confederacy built ships designed as smaller versions of the Virginia, many of which saw action,[26] but their attempts to buy ironclads overseas were frustrated as European nations confiscated ships being built for the Confederacy — especially in Russia, the only country to openly support the Union through the war. Only CSS Stonewall was completed, and she arrived in

4

From Wikipedia, the free encyclopedia
American waters just in time for the end of the war.[27] Through the remainder of the war, ironclads saw action in the Union’s attacks on confederacy ports. Seven Union monitors, including USS Montauk, as well as two other ironclads, the ironclad frigate New Ironsides and a light-draft Keokuk, participated in the failed attack on Charleston; one was sunk. Two small ironclads, CSS Palmetto State and CSS Chicora participated in the defence of the harbor. For the later attack at Mobile Bay, the Union assembled four monitors as well as 11 wooden ships, facing the CSS Tennessee, the Confederacy’s most powerful ironclad and the gunboats CSS Morgan, CSS Gaines, CSS Selma.[28]

Ironclad warship
escorting transports which carried troops intending to land on the Adriatic island of Lissa. Among the Italian ironclads were seven broadside ironclad frigates, four smaller ironclads, and the newly-built Affondatore — a double-turretted ram. Opposing them, the Austrian navy had seven ironclad frigates.[29] The Austrians believed their ships to have less effective guns than their enemy, so decided to engage the Italians at close range and ram the enemy. The Austrian fleet formed into an arrowhead formation with the ironclads in the first line, charging at the Italian ironclad squadron. In the melée which followed both sides were frustrated by the lack of damage inflicted by guns, and by the difficulty of ramming—nonetheless, the effective ramming attack being made by the Austrian flagship against the Italian attracted great attention in following years.[29] The superior Italian fleet lost its two ironclads, Re d’Italia and Palestro, while the Austrian unarmoured screw two-decker Kaiser remarkably survived close actions with four Italian ironclads. The battle ensured the popularity of the ram as a weapon in European ironclads for many years, and the victory won by Austria established it as the predominant naval power in the Adriatic.[29] The battles of the American Civil War and at Lissa were very influential on the designs and tactics of the ironclad fleets that followed. In particular, it taught a generation of naval officers the misleading lesson that ramming was the best way to sink enemy ironclads.

Lissa: First fleet battle

Armament and tactics
The adoption of iron armor meant that the traditional naval armament of dozens of light cannon became useless, since their shot would bounce off an armored hull. To penetrate armor, increasingly heavy guns were mounted on ships; nevertheless, the view that ramming was the only way to sink an ironclad became widespread. The increasing size and weight of guns also meant a movement away from the ships mounting many guns broadside, in the manner of a ship-ofthe-line, towards a handful of guns in turrets for all-round fire.

The fleets engaging for the Battle of Lissa The first fleet battle, and the first ocean battle, involving ironclad warships was the Battle of Lissa in 1866. Waged between the Austrian and Italian navies, the battle pitted combined fleets of wooden frigates and corvettes and ironclad warships on both sides in the largest naval battle between Navarino and Tsushima.[29] The Italian fleet consisted of 12 ironclads and a similar number of wooden warships,

Ram craze

5

From Wikipedia, the free encyclopedia

Ironclad warship
unsuited to ramming, and the ram threw fleet tactics into disarray. The question of how an ironclad fleet should deploy in battle to make best use of the ram was never tested in battle, and if it had been, combat might have shown that rams could only be used against ships which were already stopped dead in the water.[32] The ram finally fell out of favour in the 1880s, as the same effect could be achieved with a torpedo, with less vulnerability to quick-firing guns.[33]

Development of naval guns
The armament of ironclads tended to become concentrated in a small number of powerful guns capable of penetrating the armor of enemy ships at range; calibre and weight of guns increased markedly to achieve greater penetration. Throughout the ironclad era navies also grappled with the complexities of rifled versus smoothbore guns and breechloading versus muzzle-loading.

Punch cartoon, showing Britannia dressed in the armour of an ironclad. Note the ram sticking out of Britannia’s breast plate. From the 1860s to the 1880s many naval designers believed that the development of the ironclad meant that the ram was again the most important weapon in naval warfare. With steam power freeing ships from the wind, and armor making them invulnerable to shellfire, the ram seemed to offer the opportunity to strike a decisive blow. The scant damage inflicted by the guns of Monitor and Virginia at Battle of Hampton Roads and the spectacular but lucky success of the Austrian flagship Ferdinand Max sinking the Italian Re d’Italia at Lissa gave strength to the ramming craze.[30] From the early 1870s to early 1880s most British naval officers thought that guns were about to be replaced as the main naval armament by the ram. Those who noted the tiny number of ships that had actually been sunk by ramming struggled to be heard.[31] The revival of ramming had a significant effect on naval tactics. Since the 17th century the predominant tactic of naval warfare had been the line of battle, where a fleet formed a long line to give it the best fire from its broadside guns. This tactic was totally

Breech-loading 110 pounder Armstrong gun on HMS Warrior HMS Warrior carried a mixture of 110-pounder 7 inch (180 mm) breech-loading rifles and more traditional 68-pounder smoothbore guns. Warrior highlighted the challenges of picking the right armament; the

6

From Wikipedia, the free encyclopedia
breech-loaders she carried, designed by Sir William Armstrong, were intended to be the next generation of heavy armament for the Royal Navy, but were shortly withdrawn from service.[34] Breech-loading guns seemed to offer important advantages. A breech-loader could be reloaded without moving the gun, a lengthy process particularly if the gun then needed to be re-aimed. The Warrior’s Armstrong guns also had the virtue of being lighter than an equivalent smoothbore and, because of their rifling, more accurate.[34] Nonetheless, the design was rejected because of problems which plagued breech-loaders for decades. The weakness of the breech-loader was the obvious problem of sealing the breech. All guns are powered by the explosive conversion of gunpowder into gas. This explosion propels the shot or shell out of the front of the gun, but also imposes great stresses on the gun-barrel. If the breech — which experiences some of the greatest forces in the gun — is not entirely secure, then there is a risk that either gas will discharge through the breech or that the breech will break. This in turn reduces the muzzle velocity of the weapon and can also endanger the gun crew. The Warrior’s Armstrong guns suffered from both problems; the shells were unable to penetrate the 4.5 in (118 mm) armor of La Gloire, while sometimes the screw which closed the breech flew backwards out of the gun on firing. Similar problems were experienced with the breech-loading guns which became standard in the French and German navies.[35] These problems influenced the British to equip ships with muzzle-loading weapons of increasing power until the 1880s. After a brief introduction of 100-pounder or 9.5-inch (240 mm) smoothbore Somerset Gun, which weighed 6.5 tons (6.6 t), the Admiralty introduced 7-inch (178 mm) rifled guns, weighing 7 tons. These were followed by a series of increasingly mammoth weapons—guns weighing 12, 25, 25, 38 and finally 81 tons, with calibre increasing from 8-inch (203 mm) to 16-inch (406 mm). The decision to retain muzzle-loaders until the 1880s has been criticised by historians. However, at least until the late 1870s, the British muzzle-loaders had superior performance in terms of both range and rate of fire than the French and Prussian breech-loaders,

Ironclad warship
which suffered from the same problems as had the first Armstrong guns.[36]

Reloading the muzzle-loading guns of Duilio

The obturator invented by Charles Ragon de Bange allowed the effective sealing of breeches in breech-loading guns. From 1875 onwards, the balance between breech- and muzzle-loading changed. Captain de Bange invented a method of reliably sealing a breech, adopted by the French in 1873. Just as compellingly, the growing size of naval guns made muzzle-loading much more complicated. With guns of such size there was no prospect of hauling in the gun for reloading, or even re-loading by hand, and complicated hydraulic systems were required for re-loading the gun outside the turret without exposing the crew to enemy fire. In 1882, the 81-ton, 16-inch (406 mm) guns of HMS Inflexible fired only once every 11 minutes

7

From Wikipedia, the free encyclopedia
while bombarding Alexandria during the Urabi Revolt.[37] The 100-ton, 450 mm (17.72 inch) guns of Duilio could each fire a round every 15 minutes.[38] In the Royal Navy, the switch to breechloaders was finally made in 1879; as well as the significant advantages in terms of performance, opinion was swayed by an explosion on board HMS Thunderer caused by a gun being double-loaded, a problem which could only happen with a muzzle-loading gun.[39] The calibre and weight of guns could only increase so far. The larger the gun, the slower it would be to load, the greater the stresses on the ship’s hull, and the less the stability of the ship. The size of the gun peaked in the 1880s, with some of the heaviest calibres of gun ever used at sea. HMS Benbow carried two 16.25-inch (413 mm) breech-loading guns, each weighing 110 tons—no British battleship would ever carry guns as large. The Italian 450 mm (17.72 inch) guns would be larger than any gun fitted to a battleship until the 18.1-inch (460 mm) armament of the Japanese Yamato class of World War II.[40] Another method of increasing firepower was to vary the projectile fired or the nature of the propellant. Early ironclads used black powder, which expanded rapidly after combustion; this meant cannons had relatively short barrels, to prevent the barrel itself slowing the shell. The sharpness of the black powder explosion also meant that guns were subjected to extreme stress. One important step was to press the powder into pellets, allowing a slower, more controlled explosion and a longer barrel. A further step forward was the introduction of chemically different "brown powder" which combusted more slowly again. It also put less stress on the insides of the barrel, allowing guns to last longer and to be manufactured to tighter tolerances.[41] The development of smokeless powder, based on nitroglycerine or nitrocellulose, by the French inventor Paul Vielle in 1884 was a further step allowing smaller charges of propellant with longer barrels. The guns of the pre-Dreadnought battleships of the 1890s tended to be smaller in calibre compared to the ships of the 1880s, most often 12 in (305 mm), but progressively grew in length of barrel, making use of improved propellants to gain greater muzzle velocity.[41]

Ironclad warship
The nature of the projectiles also changed during the ironclad period. Initially, the best armor-piercing projectile was a solid castiron shot. Later, shot of chilled iron, a harder iron alloy, gave better armor-piercing qualities. Eventually the armor-piercing shell was developed.[41]

Positioning of armament
Broadside ironclads

The conventional broadside of HMS Warrior of 1860 The first British, French and Russian ironclads, in a logical development of warship design from the long preceding era of wooden ships of the line, carried their weapons in a single line along their sides and so were called "broadside ironclads." Both La Gloire and HMS Warrior were examples of this type. Because their armor was so heavy, they could only carry a single row of guns along the main deck on each side rather than a row on each deck.[42] A significant number of broadside ironclads were built in the 1860s, principally in Britain and France, but in smaller numbers by other powers including Italy, Austria, Russia and the United States. The advantages of mounting guns on both broadsides was that

8

From Wikipedia, the free encyclopedia
the ship could engage more than one adversary at a time, and the rigging did not impede the field of fire.[43] Broadside armament also had disadvantages, which became more serious as ironclad technology developed. Heavier guns to penetrate ever-thicker armor meant that fewer guns could be carried, and so it was important that every gun could be brought to bear. Furthermore, the adoption of ramming as an important tactic meant the need for ahead and all-round fire.[44] These problems led to broadside designs being superseded by designs that gave greater all-round fire, which included central-battery, turret, and barbette designs.[43]

Ironclad warship
The turret made its debut with USS Monitor in 1862, with a type of turret designed by the Swedish engineer John Ericsson. A competing turret design was proposed by the British inventor Cowper Coles. Ericsson’s turret turned on a central spindle, and Coles’s turned on a ring of bearings.[41] Turrets offered the maximum arc of fire from the guns, but there were significant problems with their use in the 1860s. The fire arc of a turret would be considerably limited by masts and rigging, so they were unsuited to use on the earlier ocean-going ironclads. The second problem was that turrets were extremely heavy—unless a ship was very large, the weight of the turrets meant a ship needed a low freeboard or would suffer from stability problems.[46] HMS Captain, designed by Coles as an example of how this circle could be squared, capsized in 1870. Her half-sister Monarch was restricted to firing from her turrets only on the port and starboard beams. The third Royal Navy ship to combine turrets and masts was HMS Inflexible of 1876, which carried two turrets on either side of the centre-line, allowing both to fire fore, aft and broadside.[47] A lighter alternative to the turret, particularly popular with the French navy, was the barbette. These were fixed armored towers which held a gun on a turntable; the gun was often on a ’disappearing mount’ which carried it entirely into the barbette for loading and out for firing. The crew was sheltered from direct fire, but vulnerable to plunging fire, for instance from shore emplacements. The barbette was lighter than the turret, needing less machinery and no roof armor—though nevertheless some barbettes were stripped of their armor plate to reduce the top-weight of their ships. The barbette became widely adopted in the 1880s, and with the addition of an armored ’gun-house’, transformed into the turrets of the preDreadnought battleships.[41]

Turrets, batteries and barbettes

A barbette of Redoutable of 1876 There were two main alternatives to the broadside. In one design, the guns were placed in an armoured casemate amidships: this arrangement was called the ’box-battery’ or ’centre-battery’. In the other, the guns could be placed on a rotating platform to give them a broad field of fire; when fully armored, this arrangement was a turret and when partially or unarmored a barbette. The centre-battery was the simpler and, during the 1860s and 1870s, the more popular method. Concentrating guns amidships meant the ship could be shorter and handier than a broadside type. The first full-scale centre-battery ship was HMS Bellerophon of 1865; the French laid down centre-battery ironclads in 1865 which were not completed until 1870. Centre-battery ships often, but not always, had a recessed freeboard enabling some of their guns to fire directly ahead.[45]

Torpedos
The ironclad age saw the development of explosive torpedos as naval weapons, which helped complicate the design and tactics of ironclad fleets. The first torpedoes were static mines, used extensively in the American Civil War. That conflict also saw the development of the spar torpedo, an explosive charge pushed against the hull of a warship

9

From Wikipedia, the free encyclopedia
by a small boat. For the first time, a large warship faced a serious threat from a smaller one—and given the relative inefficiency of shellfire against ironclads, the threat from the spar torpedo was taken seriously. The U.S. Navy converted four of its monitors to become turretless armored spar-torpedo vessels while under construction in 1864–5, but these vessels never saw action.[48] Another proposal, the towed or ’Harvey’ torpedo, involved an explosive on a line or outrigger; either to deter a ship from ramming or to make a torpedo attack by a boat less suicidal. A more practical and influential weapon was the self-propelled or ’Whitehead’ torpedo. Invented in 1868 and deployed in the 1870s, the Whitehead torpedo formed part of the armament of ironclads of the 1880s like HMS Inflexible and the Italian Duilio and Dandolo. The ironclad’s vulnerability to the torpedo was a key part of the critique of armored warships made by the Jeune Ecole school of naval thought; it appeared that any ship armored enough to prevent destruction by gunfire would be slow enough to be easily caught by torpedo. In practice, however, the Jeune Ecole was only briefly influential and the torpedo formed part of the confusing mixture of weapons possessed by ironclads.[49]

Ironclad warship

Hulls: iron, wood and steel
Using iron construction for warships offered advantages for the engineering of the hull. However, unarmored iron had many military disadvantages, and offered technical problems which kept wooden hulls in use for many years, particularly for long-range cruising warships. Iron ships had first been proposed for military use in the 1820s. In the 1830s and 1840s France, Britain and the USA had all experimented with iron-hulled but unarmored gunboats and frigates. However, the iron-hulled frigate was abandoned by the end of the 1840s, because iron hulls were more vulnerable to solid shot; iron was more brittle than wood, and iron frames more likely to fall out of shape than wood.[50] The unsuitability of unarmored iron for warship hulls meant that iron was only adopted as a building material for battleships when protected by armor. However, iron gave the naval architect many advantages. Iron allowed larger ships and more flexible design, for instance the use of watertight bulkheads on the lower decks. Warrior, built of iron, was longer and faster than the wooden-hulled La Gloire. Iron could be produced to order and used immediately, in contrast to the need to give wood a long period of seasoning. And, given the large quantities of wood required to build a steam warship and the falling cost of iron, iron hulls were increasingly cost-effective. The main reason for the French use of wooden hulls for the ironclad fleet built in the 1860s was that the French iron industry could not supply enough, and the main reason why Britain built its handful of wooden-hulled ironclads was to make best use of hulls already started and wood already bought.[51] Wooden hulls continued to be used for long-range and smaller ironclads, because iron nevertheless had a significant disadvantage. Iron hulls suffered quick fouling by marine life, slowing the ships down—manageable for a European battlefleet close to dry docks, but a difficulty for long-range ships. The only solution was to sheath the iron hull first in wood and then in copper, a laborious and expensive process which made wooden construction remain attractive.[52] Iron and wood were to some extent interchangeable: the Japanese Kongo and Hiei ordered in 1875

Armor and construction

The French Redoutable (1876), the first battleship to use steel as the main building material The first ironclads were built on wooden or iron hulls, and protected by wrought iron armor backed by thick wooden planking. Ironclads were still being built with wooden hulls into the 1870s.

10

From Wikipedia, the free encyclopedia
were sister-ships, but one was built of iron and the other of composite construction.[53] After 1872, steel started to be introduced as a material for construction. Compared to iron, steel allows for greater structural strength for a lower weight. The French Navy led the way with the use of steel in its fleet, starting with the Redoutable, laid down in 1873 and launched in 1876.[54] Redoutable nonetheless had wrought iron armor plate, and part of her exterior hull was iron rather than steel. Even though Britain led the world in steel production, the Royal Navy was slow to adopt steel warships. The Bessemer process for steel manufacture produced too many imperfections for large-scale use on ships. French manufacturers used the Siemens-Martin process to produce adequate steel, but British technology lagged behind.[55] The first allsteel warships built by the Royal Navy were the dispatch vessels Iris and Mercury, laid down in 1875 and 1876.

Ironclad warship
strongest shipbuilding wood. The wood played two roles, preventing spalling and also preventing the shock of a hit damaging the structure of the ship. Later, wood and iron were combined in ’sandwich’ armor, for instance in HMS Inflexible.[56] Steel was also an obvious material for armor. It was tested in the 1860s, but the steel of the time was too brittle and disintegrated when struck by shells. Steel became practical to use when a way was found to fuse steel onto wrought iron plates, giving a form of compound armor. This compound armor was used by the British in ships built from the late 1870s, first for turret armor (starting with HMS Inflexible) and then for all armor (starting with Colossus of 1882).[57] The French and German navies adopted the innovation almost immediately, with licenses being given for the use of the ’Wilson System’ of producing fused armor.[58] The first ironclads to have all-steel armor were the Italian Duilio and Dandolo. Though the ships were laid down in 1873 their armor was not purchased from France until 1877. The French navy decided in 1880 to adopt compound armor for its fleet, but found it limited in supply, so from 1884 the French navy was using steel armor.[58] Britain stuck to compound armor until 1889. The ultimate ironclad armor was case hardened nickel-steel. In 1890, the U.S. Navy tested steel armor hardened by the Harvey process and found it superior to compound armor. For several years ’Harvey steel’ was the state of the art, produced in the U.S., France, Germany, Britain, Austria and Italy. In 1894, the German firm Krupp developed gas cementing, which further hardened steel armor. The German Kaiser Friedrich III, laid down in 1895, was the first ship to benefit from the new ’Krupp armor’ and the new armor was quickly adopted; the Royal Navy using it from HMS Canopus, laid down in 1896. By 1901 almost all new battleships used Krupp armor, though the U.S. continued to use Harvey armor alongside until the end of the decade. The equivalent strengths of the different armor plates was as follows: 15 in (381 mm) of wrought iron was equivalent to 12 in (305 mm) of either plain steel or compound iron and steel armor, and to 7.75 in (197 mm) of Harvey armor or 5.75 in (146 mm) of Krupp armor.[59]

Armor and protection schemes

The iron-and-wood armor of HMS Warrior Iron-built ships used wood as part of their protection scheme. HMS Warrior was protected by 4.5 in (114 mm) of wrought iron backed by 15 in (381 mm) of teak, the

11

From Wikipedia, the free encyclopedia
Ironclad construction also prefigured the later debate in battleship design between tapering and ’all-or-nothing’ armour design. Warrior was only semi-armoured, and could have been disabled by hits on the bow and stern.[60] As the thickness of armor grew to protect ships from the increasingly heavy guns, the area of the ship which could be fully protected diminished. Inflexible’s armor protection was largely limited to the central citadel amidships, protecting boilers and engines, turrets and magazines, and little else. An ingenious arrangement of cork-filled compartments and watertight bulkheads was intended to keep her stable and afloat in the event of heavy damage to her un-armored sections.[61]

Ironclad warship

Propulsion: steam and sail

French armoured floating battery Arrogante (1864). masts. Her principal role was for combat in the English Channel and other European waters; and while her coal supplies gave her enough range to cross the Atlantic, she would have had little endurance on the other side of the ocean. The Devastation and the similar ships commissioned by the British and Russian navies in the 1870s were the exception rather than the rule. Most ironclads of the 1870s retained masts, and only the Italian navy, which during that decade was focused on short-range operations in the Adriatic,[64] built consistently mastless ironclads.[65] During the 1860s, steam engines improved with the adoption of double-expansion steam engines, which used 30–40% less coal than earlier models. The Royal Navy decided to switch to the double-expansion engine in 1871, and by 1875 they were widespread. However, this development alone was not enough to herald the end of the mast. Whether this was due to a conservative desire to retain sails, or was a rational response to the operational and strategic situation, is a matter of debate. A steam-only fleet would require a network of coaling stations worldwide, which would need to be fortified at great expense to stop them falling into enemy hands. Just as significantly, because of unsolved problems with the technology of the boilers which provided steam for the engines, the performance of double-expansion engines was rarely as good in practice as it was in theory.[66]

La Gloire under sail The first ocean-going ironclads carried masts and sails like their wooden predecessors, and these features were only gradually abandoned. Early steam engines were inefficient; the wooden steam fleet of the Royal Navy could only carry "5 to 9 days coal",[62] and the situation was similar with the early ironclads. Warrior also illustrates two design features which aided hybrid propulsion; she had retractable screws to reduce drag while under sail (though in practice the steam engine was run at a low throttle), and a telescopic funnel which could be folded down to the deck level.[63] Ships designed for coastal warfare, like the floating batteries of the Crimea, or USS Monitor and her sisters, dispensed with masts from the beginning. The British HMS Devastation, started in 1869, was the first large, ocean-going ironclad to dispense with

12

From Wikipedia, the free encyclopedia

Ironclad warship
The final evolution of ironclad propulsion was the adoption of the triple-expansion steam engine, a further refinement which was first adopted in HMS Sans Pareil, laid down in 1885 and commissioned in 1891. Many ships also used a forced draught to get additional power from their engines, and this system was widely used until the introduction of the steam turbine in the mid-1900s.[69]

Fleets
Inflexible, after the replacement of her sailing masts with ’military masts’ During the 1870s the distinction grew between ’first-class ironclads’ or ’battleships’ on the one hand, and ’cruising ironclads’ designed for long-range work on the other. The demands on first-class ironclads for very heavy armor and armament meant increasing displacement, which reduced speed under sail; and the fashion for turrets and barbettes made a sailing rig increasingly inconvenient. HMS Inflexible, launched in 1876 but not commissioned until 1881, was the last British battleship to carry masts, and these were widely seen as a mistake. The start of the 1880s saw the end of sailing rig on ironclad battleships.[62] Sails persisted on ’cruising ironclads’ for much longer. During the 1860s the French navy had produced the Alma and La Galissoniere classes as small, long-range ironclads as overseas cruisers[67] and the British had responded with ships like Swiftsure of 1870. The Russian ship General Admiral, laid down in 1870 and completed in 1875, was a model of a fast, long-range ironclad which was likely to be able to out-run and out-fight ships like Swiftsure. Even the later HMS Shannon, often described as the first British armored cruiser, would have been too slow to outrun General Admiral. While Shannon was the last British ship with a retractable propellor, later armored cruisers of the 1870s retained sailing rig, sacrificing speed under steam in consequence. It took until 1881 for the Royal Navy to lay down a long-range armored warship capable of catching enemy commerce raiders, Warspite, which was completed in 1888.[68] While sailing rigs were obsolescent for all purposes by the end of the 1880s, rigged ships were in service until the early years of the 20th century. While ironclads spread rapidly in navies worldwide, there were few pitched naval battles involving ironclads. Most European nations settled differences on land, and the Royal Navy dominated the sea to such an extent that no rival power could effectively challenge Britain. The naval engagements involving ironclads normally involved colonial actions or clashes between second-rate naval powers. There were many types of ironclads:[70] • Seagoing ships intended to "stand in the line of battle"; the precursors of the battleship.[71] • Coastal service and riverine vessels, including ’floating batteries’ and ’monitors’ • Vessels intended for commerce raiding or protection of commerce, called ’armoured cruisers’

Navies
The United Kingdom possessed the largest navy in the world for the whole of the ironclad period. The Royal Navy was the second to adopt ironclad warships, and it applied them worldwide in their whole range of roles. In the age of sail, the British strategy for war depended on the Royal Navy mounting a blockade of the ports of the enemy. Because of the limited endurance of steamships, this was no longer possible, so the British planned to engage an enemy fleet in harbor as soon as war broke out. To this end, the Royal Navy developed a series of ’coast-assault battleships’, starting with the Devastation class. These ’breastwork monitors’ were markedly different from the other high-seas ironclads of the period and were an important precursor of the modern battleship.[72] Through the 1860s and 1870s the Royal Navy was superior to its potential rivals, but in the early 1880s widespread concern about the

13

From Wikipedia, the free encyclopedia
threat from France and Germany culminated in the Naval Defence Act which promulgated the idea of a ’two-power standard’, that Britain should possess as many ships as the next two navies combined. This standard provoked aggressive shipbuilding in the 1880s and 1890s.[73] British ships did not participate in any major wars in the ironclad period. The Royal Navy’s ironclads only saw action as part of colonial battles or one-sided engagements like the bombardment of Alexandria in 1882. Defending British interests against Ahmed ’Urabi’s Egyptian revolt, a British fleet opened fire on the fortifications around the port of Alexandria. A mixture of centre-battery and turret ships bombarded Egyptian positions for most of a day, forcing the Egyptians to retreat; return fire from Egyptian guns was heavy at first, but inflicted little damage, killing only five British sailors.[74] The French navy built the first ironclad to try to gain a strategic advantage over the British, but were consistently out-built by the British. Despite taking the lead with a number of innovations like breech-loading weapons and steel construction, the French navy could never match the size of the Royal Navy. In the 1870s, the construction of ironclads ceased for a while in France as the Jeune Ecole school of naval thought took prominence, suggesting that torpedo boats and unarmored cruisers would be the future of warships. Like the British, the French navy saw little action with its ironclads; the French blockade of Germany in the FrancoPrussian War was ineffective, as the war was settled entirely on land.[75] Russia built a number of ironclads, generally copies of British or French designs. Nonetheless, there were real innovations from Russia; the first true type of ironclad armored cruiser, the General Admiral of the 1870s, and a set of remarkably badly-designed circular battleships referred to as ’popoffkas’. The Russian Navy pioneered the wide-scale use of torpedo boats during the Russo-Turkish War of 1877–1878, mainly out of necessity because of the superior numbers and quality of ironclads used by the Turkish navy.[76] Russia expanded her navy in the 1880s and 1890s with modern armored cruisers and battleships, but the ships were let down by poor crews and leadership, resulting in the famous defeats by the Japanese in the Russo-Japanese War of 1904–1905.[77]

Ironclad warship

The Battle of Iquique, where Peruvian ironclad Huáscar sunk the Chilean wooden corvette Esmeralda. The U.S. Navy ended the Civil War with about fifty monitor-type coastal ironclads; by the 1870s most of these were laid up in reserve, leaving the USA virtually without an ironclad fleet. Another five large monitors were ordered in the 1870s. The limitations of the monitor type effectively prevented the USA from projecting power overseas, and until the 1890s the USA would have come off badly in a conflict with even Spain or the Latin American powers. The 1890s saw the beginning of what became the Great White Fleet, and it was the modern pre-Dreadnoughts and armored cruisers built in the 1890s which defeated the Spanish fleet in the Spanish-American War of 1898. This started a new era of naval warfare.[78]

The Loa being fitted after its conversion in the Callao harbour, 1864 Ironclads were widely used in South America. Both sides used ironclads in the Chincha Islands War between Spain and the combined forces of Peru and Chile in the early 1860s. The powerful Spanish Numancia participated in the Battle of Callao but was unable to inflict significant damage to the Callao defences. Besides, Peru was able to deploy two locally built ironclads based on

14

From Wikipedia, the free encyclopedia
American Civil War designs[79], the Loa (a wooden ship converted into a casemate ironclad) and the Victoria (an small monitor armed with a single 68 pdr gun), as well as two British-built ironclads; Independencia, a centre-battery ship, and the turret ship Huáscar. Numancia was the first ironclad to circumnavigate the world, arriving in Cádiz on 20 September 1867, and earning the motto: "Enloricata navis que primo terram circuivit"). In the War of the Pacific in 1879, both Peru and Chile had ironclad warships, including some of those used a few years previously against Spain. While the Independencia ran aground early on, the Peruvian ironclad Huáscar made a great impact against Chilean shipping, delaying Chilean ground invasion by six months. She was eventually caught by two more modern Chilean centre-battery ironclads, the Blanco Encalada and the Almirante Cochrane at the Battle of Angamos Point.[80]

Ironclad warship
Chinese Beiyang fleet which was superior on paper at least at the Battle of the Yalu River. Thanks to superior short-range firepower, the Japanese fleet came off better, sinking or severely damaging eight ships and receiving serious damage to only four. The naval war was concluded the next year at the Battle of Weihaiwei, where the strongest remaining Chinese ships were surrendered to the Japanese.[81]

End of the ironclad
There is no clearly-defined end to the ironclad, besides the transition from wood hulls to all metal. Ironclads continued to be used in World War I. Towards the end of the 19th century, the descriptions ’battleship’ and ’armored cruiser’ came to replace the term ’ironclad’.[82] The proliferation of ironclad battleship designs came to an end in the 1890s as navies reached a consensus on the design of battleships, producing the type known as the pre-Dreadnought. These ships are sometimes covered in treatments of the ironclad warship. The next evolution of battleship design, the dreadnought, is never referred to as an ’ironclad’.[83] Most of the ironclads of the 1870s and 1880s served into the first decade of the 20th century. A handful, for instance US navy monitors laid down in the 1870s, saw active service in World War I. Pre-Dreadnought battleships and cruisers of the 1890s saw widespread action in World War I and in some cases through to World War II.

The Confederacy’s last ironclad was also Japan’s first: Stonewall was later renamed Kōtetsu. Ironclads were also used from the inception of the Imperial Japanese Navy. The Kōtetsu (Japanese: ??, literally "Ironclad", later renamed Azuma ?, "East") had a decisive role in the Naval Battle of Hakodate Bay in May 1869, which marked the end of the Boshin War, and the complete establishment of the Meiji Restoration. The IJN continued to develop its strength and commissioned a number of warships from British and European shipyards, first ironclads and later armored cruisers. These ships engaged the

Today
A number of ironclads have been preserved or reconstructed as museum ships. • HMS Warrior is today a fully-restored museum ship in Portsmouth, England. • Huáscar is berthed at the port of Talcahuano, on display for visitors. • The City class ironclad USS Cairo is currently on display in Vicksburg, Mississippi. • Northrop Grumman in Newport News constructed a full-scale replica of USS Monitor. The replica was laid down in February, 2005 and completed just two months later.[84]

15

From Wikipedia, the free encyclopedia
• The Dutch Ramtorenschip (Coastal ram) Zr. Ms. Buffel is currently under display in the Maritiem Museum Rotterdam. • The Dutch Ramtorenschip (Coastal ram) Zr. Ms. Schorpioen is a museum ship at Den Helder. • The complete, recovered wooden hull of the CSS Neuse, a Monitor class ship, is on view in Kinston, North Carolina, and, in another part of town on the Neuse River, the recreated ship, named CSS Neuse II, is nearly built and can be visited.

Ironclad warship

[24] Preston, pp. 12–4. [25] Sondhaus, pp. 78–81. [26] Sondhaus, p. 82. [27] Sondhaus, p. 85. [28] Sondhaus, p. 81. [29] ^ Sondhaus, pp. 94–6. [30] Hill, p. 35. [31] Beeler, J. Birth of the Battleship: British Capital Ship Design, 1870–1881. London, Caxton, 2003. ISBN 1-84067-5349 pp. 106–7. [32] Beeler, p. 107. [33] Beeler, p. 146. [34] ^ Beeler, p. 71. [35] Beeler, pp. 72–3. [1] Hill, Richard. War at Sea in the Ironclad [36] Beeler, pp. 73–5. Age ISBN 0-304-35273-X; p. 17. [37] Beeler, p.77–8 [2] Sondhaus, Lawrence. Naval Warfare [38] Brown, D.K. The Era of Uncertainty, in 1815–1914 ISBN 0-415-21478-5, pp. Steam Steel and Shellfire, p. 85. 73–4. [39] Roberts, J "Warships of Steel 1879–1889" [3] Sondhaus, p. 86. in Gardiner Steam, Steel and Shellfire" [4] ^ Hill, p. 17. [40] The Royal Navy did build 18-inch [5] ^ Lambert, A. "The Screw Propellor (460 mm) guns for the Furious class Warship", in Gardiner Steam, Steel and battlecruisers, though these ships were Shellfire pp. 30–44. finished as aircraft carriers and their [6] Sondhaus, pp. 37–41. guns eventually fitted to the Lord Clive [7] Hill, p. 25. class monitor, seeing service in World [8] Sondhaus, p. 58. War I. [9] Lambert, A. Battleships in Transition, [41] ^ Campbell, J "Naval Armaments and Conway Maritime Press, London, 1984. Armour" in Gardiner Steam, Steel and ISBN 0-85177-315-X. pp. 94–5. Shellfire, pp. 158–69. [10] Baxter, p. 70, http://books.google.com/ [42] Sondhaus, pp. 73–4. books?id=rR95Mi7vVHoC&pg=PA82&dq=Lave+Tonnante+D%C3%A9vastation#PPA70,M1 [43] ^ Beeler, pp. 91–3. [11] Baxter, p. 72, http://books.google.com/ [44] Noel, Gerard H U et al., The Gun, Ram books?id=rR95Mi7vVHoC&pg=PA82&dq=Lave+Tonnante+D%C3%A9vastation#PPA72,M1 and Torpedo, Manoeuvres and tactics of [12] Baxter, p. 76, http://books.google.com/ a Naval Battle of the Present Day, 2nd books?id=rR95Mi7vVHoC&pg=PA82&dq=Lave+Tonnante+D%C3%A9vastation#PPA72,M1 Edition, pub Griffin 1885. [13] Batteries flottantes classe Dévastation, [45] Sondhaus, p. 87. Dorriers marine, [46] Beeler, pp. 92–3. http://dossiersmarine.free.fr/ [47] Beeler, p. 122. fs_b_B1.html [48] Sondhaus, p. 83. [14] Paxton, p. 82, http://books.google.com/ [49] Sondhaus, p. 156. books?id=rR95Mi7vVHoC&pg=PA82&dq=Lave+Tonnante+D%C3%A9vastation#PPA82,M1 [50] Lambert Battleships in Transition, p. 19. [15] ^ Lambert A. "Iron Hulls and Armour [51] Beeler, pp. 30–6. Plate"; Gardiner Steam, Steel and [52] Beeler, pp. 32–3. Shellfire pp. 47–55. [53] Jenschura Jung & Mickel, Warships of [16] Baxter, p. 84, http://books.google.com/ the Imperial Japanese Navy, ISBN books?id=rR95Mi7vVHoC&pg=PA82&dq=Lave+Tonnante+D%C3%A9vastation#PPA84,M1 0-85368-151-1. [17] Sondhaus, p. 61. [54] Gardiner, "Steam, Steel and Shellfire", [18] Sondhaus, pp. 73–4. p.96 [19] Sondhaus, p. 74. [55] Beeler, pp. 37–41. [20] Sondhaus, p. 76. [56] Hill, p. 39. [21] Sondhaus, p. 77. [57] Beeler, p. 45. [22] Still, William "The American Civil War" [58] ^ Sondhaus, pp. 164–5. in Gardiner Steam, Steel and Shellfire. [59] Sondhaus, p. 166. [23] Sondhaus, p. 78. [60] Reed "Our Iron Clad Ships", pp. 45–7.

Notes

16

From Wikipedia, the free encyclopedia
[61] Beeler, pp. 133–4. [62] ^ Beeler, p. 54. [63] Hill, p. 44. [64] Sondhaus, p. 111–2. [65] Beeler, pp. 63–4. [66] Beeler, pp. 57–62. [67] Sondhaus, p. 88. [68] Beeler, p. 194. [69] Griffiths, D "Warship Machinery" in Gardiner Steam, Steel and Shellfire. [70] Conway, All the World’s Fighting Ships 1860–1905, Conway Maritime Press, 1979. ISBN 0-8317-0302-4. [71] This term was still in use in the 1860s and 70s for what we would now call ’battleships’. See Noel, Gerard H U et al., The Gun, Ram and Torpedo, Manoeuvres and tactics of a Naval Battle of the Present Day, 2nd Edition, Griffin 1885. [72] Beeler, p. 204. [73] Kennedy, Paul M. The Rise and Fall of British Naval Mastery, Macmillan, London, 1983. ISBN 0-333-35094, pp. 178–9. [74] Hill, p. 185. [75] Sondhaus, p. 101. [76] Sondhaus, pp. 122–6. [77] Sondhaus, pp. 187–91. [78] Sondhaus, pp. 126–8 173–9. [79] Historia naval del Perú. Tomo IV, Valdizán Gamio, José. [80] Sondhaus pp. 97–9, 127–32. [81] Hill, p. 191. [82] Beeler, p. 154 states that HMS Edinburgh (1882) was the first British capital ship to be routinely called a battleship. [83] Hill, p. 18. [84] Northrop Grumman Newport News, Northrop Grumman Employees Reconstruct History with USS Monitor Replica, http://www.nn.northropgrumman.com/ news/2005/050226_news.html, retrieved on 2007-05-21

Ironclad warship
• Archibald, EHH (1984). The Fighting Ship in the Royal Navy 1897–1984. Blandford. ISBN 0-7137-1348-8. • Ballard, George, The Black Battlefleet. Naval Institute Press, 1980. ISBN 0-8702-1924-3. • Baxter, James Phinney III (1933), The Introduction of the Ironclad Warship, Harvard University Press, 1933. • Beeler, John, Birth of the Battleship: British Capital Ship Design 1870–1881. Caxton, London, 2003. ISBN 1-84067-5349 • Brown, DK (2003). Warrior to Dreadnought: Warship Development 1860–1905. Caxton Editions. ISBN 1-84067-529-2. • Steam, Steel and Shellfire: The Steam Warship, 1815–1905. Book Sales. 2001. ISBN 0-7858-1413-2. • Canney, Donald L The Old Steam Navy, The Ironclads, 1842–1885. Naval Institute Press, 1993 • Greene, Jack and Massignani, Alessandro (1998). Ironclads At War. Combined Publishing. ISBN 0-938289-58-6. • Hill, Richard. War at Sea in the Ironclad Age, ISBN 0-304-35273-X. • Jenschura Jung & Mickel, Warships of the Imperial Japanese Navy 1869–1946, ISBN 0-85368-151-1 • Kennedy, Paul M. The Rise and Fall of British Naval Mastery. Macmillan, London, 1983. ISBN 0-333-35094-4. • Lambert, Andrew Battleships in Transition: The Creation of the Steam Battlefleet 1815–1860. Conway Maritime Press, London, 1984. ISBN 0-85177-315-X. • Lyon, David and Winfield, Rif: The Sail and Steam Navy List, 1815–1889, Chatham Publishing, 2004. ISBN 1-86176-032-9. • Noel, Gerard et al., The Gun, Ram and Torpedo, Manoeuvres and tactics of a Naval Battle of the Present Day, 2nd Edition, pub. Griffin 1885. • Northrop Grumman Newport News, Northrop Grumman Employees Reconstruct History with USS Monitor Replica. Retrieved on 2007-05-21. • Reed, Edward J Our Ironclad Ships, their Qualities, Performance and Cost. John Murray, 1869. • Sondhaus, Lawrence. Naval Warfare 1815–1914. Routledge, London, 2001. ISBN 0-415-21478-5.

Bibliography
• Eugène M. Koleśnik, Roger Chesneau, N. J. M. Campbell. Conway’s All the World’s Fighting Ships 1860–1905. Conway Maritime Press, 1979. ISBN 0-8317-0302-4.

17

From Wikipedia, the free encyclopedia
• Sandler, Stanley. Emergence of the Modern Capital Ship (Newark, DEL. Associated University Presses, 1979.

Ironclad warship
• Images and text on the USS Monitor • The Spanish Navy Numancia, first ironclad warship to circumnavigate the world • Circular Iron-Clads in the Imperial Russian Navy • HMSWarrior.org

External links
• The first ironclads 1859–1872, engravings • Ironclads and Blockade Runners of the American Civil War

Retrieved from "http://en.wikipedia.org/wiki/Ironclad_warship" Categories: Naval armour, Ship types This page was last modified on 22 May 2009, at 10:47 (UTC). All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.) Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a U.S. registered 501(c)(3) taxdeductible nonprofit charity. Privacy policy About Wikipedia Disclaimers

18


				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:188
posted:5/24/2009
language:English
pages:18