Printable Star Chart - Excel

							                                              ROLLSTOCK DIELINE REQUEST FORM
                                                       The following information is necessary in order to produce a
                                                      basic dieline. Please also submit a diagram from the machine
                                                           manufacturer and a filled sample produced on the same
                                                                                            machine if at all possible.

YOUR NAME/COMPANY:                                                            DATE:
PRODUCT / PROJECT NAME:
                                      DIMENSIONS AND SEALS
WEB WIDTH:
REPEAT (CUTOFF):
TYPE OF BACK SEAL (# FROM CHART BELOW):
WIDTH OF BACK SEAL:
CIRCUMFERENCE OF FORMING TUBE (IF AVAILABLE):
WIDTH OF TOP AND BOTTOM SEALS:
FOR FLAT BOTTOM BAGS ONLY: SIZE OF GUSSET/BOTTOM (BAG DEPTH):
                                    EYESPOT INFORMATIONN
EYESPOT SIZE:
EYESPOT POSITION IN RELATION TO THE CUTOFF:
ON WHAT SIDE OF THE WEB IS THE EYESPOT IF THE FACE PANEL COPY IS RIGHT-READING?
PREFERRED DISTANCE OF EYESPOT FROM THE EDGE OF THE WEB (1/8" MINIMUM**):
**DUE TO MANUFACTURING TOLERANCES, THE MINIMUM DISTANCE WE CAN PLACE THE EYESPOT FROM THE EDGE OF THE WEB IS 1/8". PLE
THIS CREATES A PROBLEM FOR YOUR EQUIPMENT.
                                    INNO-LOK ZIPPER INFORMATION
WILL THIS FILM HAVE AN INNO-LOK ZIPPER?
SIZE OF INNO-LOK OPENING (PLEASE NOTE - THE ZIP ATTACHMENT IS 3/4" WIDER THAN THE OPENING):
MINIMUM DISTANCE BETWEEN THE BOTTOM OF THE TOP SEAL AND THE TOP OF THE ZIP ATTACHMENT:
                                      MISCELLANEOUS
SURFACE OR REVERSE PRINT (IS INK ON SURFACE OF FILM OR BURIED BETWEEN LAYERS OF FILM):
COLOR OF SUBSTRATE:
ARE THERE ANY SPECIAL NON-PRINTABLE AREAS? IF SO, PLEASE EXPLAIN:



SPECIAL INSTRUCTIONS: