Thank you for purchasing Cobra iRadar™, Connecting with Cobra iRadar On your iPhone/iPod the world’s first connected radar/laser/red touch, enter Plug in your Cobra iRadar detector unit light camera detector. the Settings menu. using the included cigarette lighter Cobra iRadar uses Bluetooth® wireless adapter. technology to connect your iPhone®/iPod touch® to display radar alerts and change settings. Follow these simple steps to get your Cobra iRadar up and running. Cobra iRadar is made for: iPhone 4 Press General, then iPhone 3GS Bluetooth. Make sure iPhone 3G Turn unit on. A red LED will light. Bluetooth is switched iPod touch (3rd Generation) to ON. iPod touch (2nd Generation) Quick Start Guide Printed in China Part No. 480-667-P Version D NOTE: This device complies with part 15 of FCC rules: Operation is subject to the following two conditions: (1) This device may not cause harmful NOTE: *Location-based alerts and GPS interference, and (2) This device must accept any interference received including interference that may cause undesired operation. settings available only with iPhone. CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may violate FCC Rules and void authority to operate this Only radar/laser alerts and settings equipment. will work with iPod touch. The LED on the detector unit will 3) If iRADAR 100 does not appear under iRadar 100 should flash blue. When pairing has Devices or you experience an intermittent Settings appear under Devices. been completed, it will Bluetooth connection, completely turn off Configure your Cobra Note: Your iPhone/iPod touch turn solid blue. both your iPhone/iPod Touch and iRadar iRadar settings. may take 30 seconds to one detector unit, wait 30 seconds, and then Note: All radar/laser/red light minute to recognize the device. Bluetooth Pairing Tips turn them back on. camera detector settings will If you are having trouble initializing or be inactive if you are not It will initially appear as maintaining your Bluetooth connection take Cobra iRadar App paired with Cobra iRadar or “Headset” and will then the following steps: To download the App, enter the App Store on are out of range. turn into iRADAR 100. If you cannot see the device, try restarting 1) Turn off your Cobra iRadar detector device, your iPhone/iPod touch and search for “Cobra both iRadar and your iPhone/iPod touch and wait 30 seconds, and then turn it back on. iRadar” and follow the onscreen instructions. View Map re-do steps 1 through 5. On your iPhone/iPod Touch, turn Bluetooth Now open the App and enjoy using iRadar! View user-marked locations, Off and then On again. red light camera locations Press iRADAR 100, Dashboard in your area and GPS-based 2) If you are still not connected, go to the then press Pair. Display speedometer, speed & direction of travel. Bluetooth Settings menu on your iPhone/ iPod Touch. Press the button to the compass and car right of iRADAR 100 and then press battery voltage. For more information about “Forget this Device”. Wait approximately AURA™, please visit: 30 seconds for iRADAR 100 to appear www.cobra.com/AURA. under Devices and then press iRADAR 100 For more information on iRadar accessories, to reinitialize pairing. go to: www.cobrairadar.com.