Nokia Codes

Document Sample
Nokia Codes Powered By Docstoc
					Here's a list of Nokia codes. These codes will work on most nokia phones phones. Please
use with caution.

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and
"+" symbols) This is the lock most often used.
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and
"+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and
"+" symbols)
#pw+1234567890+4# Sim Card Lock Status. (use the "*" button to obtain the "p,w" and
"+" symbols)
*#0000# *#0000# Displays your phones software version, 1st Line : Software Version,
2nd Line : Software Release Date, 3rd Line : Compression Type
*#06# For checking the International Mobile Equipment Identity (IMEI Number) This is
the number that the police recommend you make a note of in case your phone is stolen.
*#92702689#
*#war0anty#
Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000
for no repairs), 5.Transfer User Data. To exit this mode you may need to switch your
phone off then on again.
*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound
quality but talktime is reduced by approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you
should gain approx 30% more Talk Time
#4720# Deactivate Half Rate Codec
*#746025625# *#sim0clock# Displays the Sim Clock status, if your phone supports this
power saving feature "SIM Clock Stop Allowed", it means you will get the best standby
time possible. No matter what anyone tells you this will not allow you to get free calls or
text message. If your phone has this feature then it is already active.
*#67705646#
*#opr0logo# Removes operator logo on 3310 & 3330, i suggest you don't do this if you
shelled out to buy your operator logo in the first place. The only other way to remove an
operator logo is to get another one sent to you.
*#73# Reset phone timers and game scores
*#30# Lets you see the private number
*#21# Allows you to check the number that "All Calls" are diverted to.
*#2640# Displays security code in use
*#43# Allows you to check the "Call Waiting" status of your phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to.
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are
diverted to.
*#67# Allows you to check the number that "On Busy Calls" are diverted to.
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
*#94870345123456789# Deactivate the PWM (pulse-width modulation)-Mem (I
wouldn't do this unless you know what it means)
*#7760# Manufactures code.
*#9999# Phones software version if *#0000# does not work
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#1471# Last call (Vodafone only)

HOW TO: Diverting Voice Calls by using USSD Codes Posted by Arne Hess - at
Thursday, 30.01.03 - 19:01:00 CET under 09 - Pocket PC Tutorials - Viewed 11496x

If you use call diverting often but don't want to go through the Pocket PC Phone Edition
or Smartphone 2002 menu, you can also use the USSD short codes. This feature is
available since the first GSM networks were launched and the phone menu doesn't do
anything different than sending these codes. However, this gives you a faster access to
your settings and in addition it offers you one feature which isn't available through most
mobile phone menus (defining after which time a call should be forwarded if you don't
reply). Please remember that this information is stored on the GSM network, not on your
GSM device. So doesn't matter if you change your SIM card to another terminal, the
settings are stored as long as you don't change it.

USSD codes works in the same way on all networks and GSM phone. USSD codes
always looks like:



      Activate: *USSD_Code# @



      Deactivate: #USSD_Code # @



      Delete: ##USSD_Code # @



      Check Status: *#USSD_Code# @




USSD_Code = the feature code the mobile phone should send to the network

@ = Send (green) phone button
Configuring Call Diverts


Divert all Calls (21)

All your incoming calls will be forwarded, doesn't matter if your phone is switched on or
not. The USSD
code is "21".



      Forwarding: **21*DESTINATION_NUMBER# @



      Activate: *21# @



      Deactivate: #21# @



      Delete: ##21# @



      Check Status: *#21# @




Divert if no Reply (61)

All the incoming calls will be forwarded if not taken within a defined time. The USSD
code is "61".



      Forwarding: **61*DESTINATION_NUMBER# @



      Activate: *61# @
      Deactivate: #61# @



      Delete: ##61# @



      Check Status: *#61# @




In addition you can tell the network after which time the call should be diverted. Here the
GSM specifications
define a time between 5 to 30 seconds:



      Forwarding: **61*DESTINATION_NUMBER*DELAY# @




The DELAY time can be 5, 10, 15, 20, 25 or 30 seconds.


Divert if Unavailable (62)

All the incoming calls will be forwarded if the phone is switched off or out of network
coverage. The USSD
code is "62".



      Forwarding: **62*DESTINATION_NUMBER# @



      Activate: *62# @
      Deactivate: #62# @



      Delete: ##62# @



      Check Status: *#62# @




Divert if Busy (67)

All the incoming calls will be forwarded if another call is in progress. The USSD code is
"67".



      Forwarding: **67*DESTINATION_NUMBER# @



      Activate: *67# @



      Deactivate: #67# @



      Delete: ##67# @



      Check Status: *#67# @




All Conditional Diverts (004)

You can also activate, switch on/off, check or delete all conditional forwards (61, 62 and
67) with just
one USSD code. The USSD code is "004".



      Forwarding: **004*DESTINATION_NUMBER# @



      Activate: *004# @



      Deactivate: #004# @



      Delete: ##004# @



      Check Status: *#004# @




Deactivate all Diverts (002)

This USSD code deactivates all call forwardings with one single command. The USSD
code is "002"



      ##002# @




Please note that using the unconditional "Divert all Calls (21)" overwrites all conditional
call forwarding!


USSD on Pocket PC Phone Edition
Enter the USSD code you want to use on the dial pad and tap the green "Talk" button:




Now you get the result, which depends on the USSD code you've entered:




USSD on Smartphone 2002

Enter the USSD code you want to use and press the green "Talk" button:

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:2992
posted:11/20/2010
language:English
pages:8